diff options
| author | BH Hsieh <bhsieh@nvidia.com> | 2025-01-22 18:59:43 +0800 |
|---|---|---|
| committer | Vinod Koul <vkoul@kernel.org> | 2025-02-14 18:03:05 +0530 |
| commit | 55f1a5f7c97c3c92ba469e16991a09274410ceb7 (patch) | |
| tree | a542317cdc4e1c4a693c44999885bf358a2334e0 | |
| parent | 5ab90f40121a9f6a9b368274cd92d0f435dc7cfa (diff) | |
phy: tegra: xusb: reset VBUS & ID OVERRIDE
Observed VBUS_OVERRIDE & ID_OVERRIDE might be programmed
with unexpected value prior to XUSB PADCTL driver, this
could also occur in virtualization scenario.
For example, UEFI firmware programs ID_OVERRIDE=GROUNDED to set
a type-c port to host mode and keeps the value to kernel.
If the type-c port is connected a usb host, below errors can be
observed right after usb host mode driver gets probed. The errors
would keep until usb role class driver detects the type-c port
as device mode and notifies usb device mode driver to set both
ID_OVERRIDE and VBUS_OVERRIDE to correct value by XUSB PADCTL
driver.
[ 173.765814] usb usb3-port2: Cannot enable. Maybe the USB cable is bad?
[ 173.765837] usb usb3-port2: config error
Taking virtualization into account, asserting XUSB PADCTL
reset would break XUSB functions used by other guest OS,
hence only reset VBUS & ID OVERRIDE of the port in
utmi_phy_init.
Fixes: bbf711682cd5 ("phy: tegra: xusb: Add Tegra186 support")
Cc: stable@vger.kernel.org
Change-Id: Ic63058d4d49b4a1f8f9ab313196e20ad131cc591
Signed-off-by: BH Hsieh <bhsieh@nvidia.com>
Signed-off-by: Henry Lin <henryl@nvidia.com>
Link: https://lore.kernel.org/r/20250122105943.8057-1-henryl@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
| -rw-r--r-- | drivers/phy/tegra/xusb-tegra186.c | 11 |
1 files changed, 11 insertions, 0 deletions
diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c index 0f60d5d1c167..fae6242aa730 100644 --- a/drivers/phy/tegra/xusb-tegra186.c +++ b/drivers/phy/tegra/xusb-tegra186.c @@ -928,6 +928,7 @@ static int tegra186_utmi_phy_init(struct phy *phy) unsigned int index = lane->index; struct device *dev = padctl->dev; int err; + u32 reg; port = tegra_xusb_find_usb2_port(padctl, index); if (!port) { @@ -935,6 +936,16 @@ static int tegra186_utmi_phy_init(struct phy *phy) return -ENODEV; } + if (port->mode == USB_DR_MODE_OTG || + port->mode == USB_DR_MODE_PERIPHERAL) { + /* reset VBUS&ID OVERRIDE */ + reg = padctl_readl(padctl, USB2_VBUS_ID); + reg &= ~VBUS_OVERRIDE; + reg &= ~ID_OVERRIDE(~0); + reg |= ID_OVERRIDE_FLOATING; + padctl_writel(padctl, reg, USB2_VBUS_ID); + } + if (port->supply && port->mode == USB_DR_MODE_HOST) { err = regulator_enable(port->supply); if (err) { |