Merge tag 'thermal-v5.16-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux

Pull thermal core and ARM thermal driver updates for v5.16 from
Daniel Lezcano:

 - Constify a variable in thermal mmio driver (Rikard Falkeborn)

 - Add the current temperature in the netlink message when crossing a
   trip point in order to prevent useless back and forth reading from
   userspace (Daniel Lezcano)

 - Add support for the 'HC' variant on PM8998 pmic in order to support
   vadc channels on recent QCom boards (Bjorn Andersson)

 - Add support of calibration values from hardware when they are fused
   (Niklas Söderlund)

 - Fix NULL pointer dereference from the thermal_release callback when
   an error occured in the thermal_zone_device_register() function
   (Yuanzheng Song)

 - Fix use after free call in the __thermal_cooling_device_register()
   function in the error path (Ziyang Xuan)

 - Fix compilation error for the LMh driver when CONFIG_QCOM_SCM is not
   set (Jackie Liu)

 - Add a timeout when reading a register which can block forever under
   certain circumstances in the tsens driver (Ansuel Smith)

 - Add DT binding for the reset lines and use them in the rockchip
   sensor driver (Johan Jonker)

 - Add new uniphier NX1 SoC temperature sensor (Kunihiko Hayashi)

 - Save and restore the TCC value in the int340x driver (Antoine
   Tenart)

 - Deprecate the cooling device state sysfs file writable and the user
   space governor (Daniel Lezcano)

* tag 'thermal-v5.16-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
  thermal/core: Deprecate changing cooling device state from userspace
  thermal/core: Make the userspace governor deprecated
  thermal/drivers/int340x: Improve the tcc offset saving for suspend/resume
  thermal/drivers/uniphier: Add compatible string for NX1 SoC
  dt-bindings: thermal: uniphier: Add binding for NX1 SoC
  thermal/drivers/rockchip_thermal: Allow more resets for tsadc node
  dt-bindings: thermal: remove redundant comments from rockchip-thermal.yaml
  dt-bindings: thermal: allow more resets for tsadc node in rockchip-thermal.yaml
  thermal/drivers/tsens: Add timeout to get_temp_tsens_valid
  thermal/drivers/qcom/lmh: make QCOM_LMH depends on QCOM_SCM
  thermal/core: fix a UAF bug in __thermal_cooling_device_register()
  thermal/core: Fix null pointer dereference in thermal_release()
  thermal: rcar_gen3_thermal: Read calibration from hardware
  thermal: rcar_gen3_thermal: Store thcode and ptat in priv data
  thermal/drivers/qcom/spmi-adc-tm5: Add support for HC variant
  dt-bindings: thermal: qcom: add HC variant of adc-thermal monitor bindings
  thermal/drivers/netlink: Add the temperature when crossing a trip point
  thermal/drivers/thermal_mmio: Constify static struct thermal_mmio_ops

20 files changed, 408 insertions, 82 deletions

diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml
new file mode 100644
index 000000000000..8273ac55b63f
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/qcom-spmi-adc-tm-hc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's SPMI PMIC ADC HC Thermal Monitoring
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+properties:
+  compatible:
+    const: qcom,spmi-adc-tm-hc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+    description:
+      Number of cells required to uniquely identify the thermal sensors. Since
+      we have multiple sensors this is set to 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  qcom,avg-samples:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of samples to be used for measurement.
+    enum:
+      - 1
+      - 2
+      - 4
+      - 8
+      - 16
+    default: 1
+
+  qcom,decimation:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This parameter is used to decrease ADC sampling rate.
+            Quicker measurements can be made by reducing decimation ratio.
+    enum:
+      - 256
+      - 512
+      - 1024
+    default: 1024
+
+patternProperties:
+  "^([-a-z0-9]*)@[0-7]$":
+    type: object
+    description:
+      Represent one thermal sensor.
+
+    properties:
+      reg:
+        description: Specify the sensor channel. There are 8 channels in PMIC5's ADC TM
+        minimum: 0
+        maximum: 7
+
+      io-channels:
+        description:
+          From common IIO binding. Used to pipe PMIC ADC channel to thermal monitor
+
+      qcom,ratiometric:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Channel calibration type.
+          If this property is specified VADC will use the VDD reference
+          (1.875V) and GND for channel calibration. If property is not found,
+          channel will be calibrated with 0V and 1.25V reference channels,
+          also known as absolute calibration.
+
+      qcom,hw-settle-time-us:
+        description: Time between AMUX getting configured and the ADC starting conversion.
+        enum: [0, 100, 200, 300, 400, 500, 600, 700, 1000, 2000, 4000, 6000, 8000, 10000]
+
+      qcom,pre-scaling:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description: Used for scaling the channel input signal before the
+          signal is fed to VADC. The configuration for this node is to know the
+          pre-determined ratio and use it for post scaling. It is a pair of
+          integers, denoting the numerator and denominator of the fraction by
+          which input signal is multiplied. For example, <1 3> indicates the
+          signal is scaled down to 1/3 of its value before ADC measurement.  If
+          property is not found default value depending on chip will be used.
+        items:
+          - const: 1
+          - enum: [ 1, 3, 4, 6, 20, 8, 10 ]
+
+    required:
+      - reg
+      - io-channels
+
+    additionalProperties:
+      false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+  - "#thermal-sensor-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/iio/qcom,spmi-vadc.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spmi_bus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pm8998_adc: adc@3100 {
+            reg = <0x3100>;
+            compatible = "qcom,spmi-adc-rev2";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #io-channel-cells = <1>;
+
+            /* Other propreties are omitted */
+            adc-chan@4c {
+                reg = <ADC5_XO_THERM_100K_PU>;
+            };
+        };
+
+        pm8998_adc_tm: adc-tm@3400 {
+            compatible = "qcom,spmi-adc-tm-hc";
+            reg = <0x3400>;
+            interrupts = <0x2 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+            #thermal-sensor-cells = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            thermistor@1 {
+                reg = <1>;
+                io-channels = <&pm8998_adc ADC5_XO_THERM_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time-us = <200>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml b/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml
index b96ea277b558..f6c1be226aaa 100644
--- a/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml
@@ -12,14 +12,14 @@ maintainers:
 properties:
   compatible:
     enum:
-      - rockchip,px30-tsadc # PX30 SoCs
-      - rockchip,rv1108-tsadc # RV1108 SoCs
-      - rockchip,rk3228-tsadc # RK3228 SoCs
-      - rockchip,rk3288-tsadc # RK3288 SoCs
-      - rockchip,rk3328-tsadc # RK3328 SoCs
-      - rockchip,rk3368-tsadc # RK3368 SoCs
-      - rockchip,rk3399-tsadc # RK3399 SoCs
-      - rockchip,rk3568-tsadc # RK3568 SoCs
+      - rockchip,px30-tsadc
+      - rockchip,rk3228-tsadc
+      - rockchip,rk3288-tsadc
+      - rockchip,rk3328-tsadc
+      - rockchip,rk3368-tsadc
+      - rockchip,rk3399-tsadc
+      - rockchip,rk3568-tsadc
+      - rockchip,rv1108-tsadc
 
   reg:
     maxItems: 1
@@ -37,11 +37,15 @@ properties:
       - const: apb_pclk
 
   resets:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3
 
   reset-names:
+    minItems: 1
     items:
       - const: tsadc-apb
+      - const: tsadc
+      - const: tsadc-phy
 
   "#thermal-sensor-cells":
     const: 1
@@ -71,7 +75,6 @@ required:
   - clocks
   - clock-names
   - resets
-  - reset-names
   - "#thermal-sensor-cells"
 
 additionalProperties: false
diff --git a/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml b/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
index 553c9dcdaeeb..c5b25ce44956 100644
--- a/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
@@ -20,6 +20,7 @@ properties:
       - socionext,uniphier-pxs2-thermal
       - socionext,uniphier-ld20-thermal
       - socionext,uniphier-pxs3-thermal
+      - socionext,uniphier-nx1-thermal
 
   interrupts:
     maxItems: 1
diff --git a/drivers/thermal/gov_user_space.c b/drivers/thermal/gov_user_space.c
index 82a7198bbe71..f4fe050e1cbc 100644
--- a/drivers/thermal/gov_user_space.c
+++ b/drivers/thermal/gov_user_space.c
@@ -15,6 +15,14 @@
 
 #include "thermal_core.h"
 
+static int user_space_bind(struct thermal_zone_device *tz)
+{
+	pr_warn("Userspace governor deprecated: use thermal netlink "	\
+		"notification instead\n");
+
+	return 0;
+}
+
 /**
  * notify_user_space - Notifies user space about thermal events
  * @tz: thermal_zone_device
@@ -43,5 +51,6 @@ static int notify_user_space(struct thermal_zone_device *tz, int trip)
 static struct thermal_governor thermal_gov_user_space = {
 	.name		= "user_space",
 	.throttle	= notify_user_space,
+	.bind_to_tz	= user_space_bind,
 };
 THERMAL_GOVERNOR_DECLARE(thermal_gov_user_space);
diff --git a/drivers/thermal/intel/int340x_thermal/int3401_thermal.c b/drivers/thermal/intel/int340x_thermal/int3401_thermal.c
index acebc8ba94e2..217786fba185 100644
--- a/drivers/thermal/intel/int340x_thermal/int3401_thermal.c
+++ b/drivers/thermal/intel/int340x_thermal/int3401_thermal.c
@@ -44,15 +44,21 @@ static int int3401_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM_SLEEP
+static int int3401_thermal_suspend(struct device *dev)
+{
+	return proc_thermal_suspend(dev);
+}
 static int int3401_thermal_resume(struct device *dev)
 {
 	return proc_thermal_resume(dev);
 }
 #else
+#define int3401_thermal_suspend NULL
 #define int3401_thermal_resume NULL
 #endif
 
-static SIMPLE_DEV_PM_OPS(int3401_proc_thermal_pm, NULL, int3401_thermal_resume);
+static SIMPLE_DEV_PM_OPS(int3401_proc_thermal_pm, int3401_thermal_suspend,
+			 int3401_thermal_resume);
 
 static struct platform_driver int3401_driver = {
 	.probe = int3401_add,
diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
index fb64acfd5e07..a8d98f1bd6c6 100644
--- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c
@@ -68,8 +68,7 @@ static const struct attribute_group power_limit_attribute_group = {
 	.name = "power_limits"
 };
 
-static ssize_t tcc_offset_degree_celsius_show(struct device *dev,
-			       struct device_attribute *attr, char *buf)
+static int tcc_get_offset(void)
 {
 	u64 val;
 	int err;
@@ -78,8 +77,20 @@ static ssize_t tcc_offset_degree_celsius_show(struct device *dev,
 	if (err)
 		return err;
 
-	val = (val >> 24) & 0x3f;
-	return sprintf(buf, "%d\n", (int)val);
+	return (val >> 24) & 0x3f;
+}
+
+static ssize_t tcc_offset_degree_celsius_show(struct device *dev,
+					      struct device_attribute *attr,
+					      char *buf)
+{
+	int tcc;
+
+	tcc = tcc_get_offset();
+	if (tcc < 0)
+		return tcc;
+
+	return sprintf(buf, "%d\n", tcc);
 }
 
 static int tcc_offset_update(unsigned int tcc)
@@ -107,8 +118,6 @@ static int tcc_offset_update(unsigned int tcc)
 	return 0;
 }
 
-static int tcc_offset_save = -1;
-
 static ssize_t tcc_offset_degree_celsius_store(struct device *dev,
 				struct device_attribute *attr, const char *buf,
 				size_t count)
@@ -131,8 +140,6 @@ static ssize_t tcc_offset_degree_celsius_store(struct device *dev,
 	if (err)
 		return err;
 
-	tcc_offset_save = tcc;
-
 	return count;
 }
 
@@ -345,6 +352,18 @@ void proc_thermal_remove(struct proc_thermal_device *proc_priv)
 }
 EXPORT_SYMBOL_GPL(proc_thermal_remove);
 
+static int tcc_offset_save = -1;
+
+int proc_thermal_suspend(struct device *dev)
+{
+	tcc_offset_save = tcc_get_offset();
+	if (tcc_offset_save < 0)
+		dev_warn(dev, "failed to save offset (%d)\n", tcc_offset_save);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(proc_thermal_suspend);
+
 int proc_thermal_resume(struct device *dev)
 {
 	struct proc_thermal_device *proc_dev;
@@ -352,6 +371,7 @@ int proc_thermal_resume(struct device *dev)
 	proc_dev = dev_get_drvdata(dev);
 	proc_thermal_read_ppcc(proc_dev);
 
+	/* Do not update if saving failed */
 	if (tcc_offset_save >= 0)
 		tcc_offset_update(tcc_offset_save);
 
diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h
index 5a1cfe4864f1..c1d8de6dc3d1 100644
--- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.h
@@ -83,6 +83,7 @@ void proc_thermal_mbox_remove(struct pci_dev *pdev);
 int processor_thermal_send_mbox_cmd(struct pci_dev *pdev, u16 cmd_id, u32 cmd_data, u32 *cmd_resp);
 int proc_thermal_add(struct device *dev, struct proc_thermal_device *priv);
 void proc_thermal_remove(struct proc_thermal_device *proc_priv);
+int proc_thermal_suspend(struct device *dev);
 int proc_thermal_resume(struct device *dev);
 int proc_thermal_mmio_add(struct pci_dev *pdev,
 			  struct proc_thermal_device *proc_priv,
diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci.c
index 11dd2e825f4f..b4bcd3fe9eb2 100644
--- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci.c
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci.c
@@ -314,6 +314,20 @@ static void proc_thermal_pci_remove(struct pci_dev *pdev)
 }
 
 #ifdef CONFIG_PM_SLEEP
+static int proc_thermal_pci_suspend(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct proc_thermal_device *proc_priv;
+	struct proc_thermal_pci *pci_info;
+
+	proc_priv = pci_get_drvdata(pdev);
+	pci_info = proc_priv->priv_data;
+
+	if (!pci_info->no_legacy)
+		return proc_thermal_suspend(dev);
+
+	return 0;
+}
 static int proc_thermal_pci_resume(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
@@ -335,10 +349,12 @@ static int proc_thermal_pci_resume(struct device *dev)
 	return 0;
 }
 #else
+#define proc_thermal_pci_suspend NULL
 #define proc_thermal_pci_resume NULL
 #endif
 
-static SIMPLE_DEV_PM_OPS(proc_thermal_pci_pm, NULL, proc_thermal_pci_resume);
+static SIMPLE_DEV_PM_OPS(proc_thermal_pci_pm, proc_thermal_pci_suspend,
+			 proc_thermal_pci_resume);
 
 static const struct pci_device_id proc_thermal_pci_ids[] = {
 	{ PCI_DEVICE_DATA(INTEL, ADL_THERMAL, PROC_THERMAL_FEATURE_RAPL | PROC_THERMAL_FEATURE_FIVR | PROC_THERMAL_FEATURE_DVFS | PROC_THERMAL_FEATURE_MBOX) },
diff --git a/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci_legacy.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci_legacy.c
index f5fc1791b11e..4571a1a53b84 100644
--- a/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci_legacy.c
+++ b/drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci_legacy.c
@@ -107,15 +107,21 @@ static void proc_thermal_pci_remove(struct pci_dev *pdev)
 }
 
 #ifdef CONFIG_PM_SLEEP
+static int proc_thermal_pci_suspend(struct device *dev)
+{
+	return proc_thermal_suspend(dev);
+}
 static int proc_thermal_pci_resume(struct device *dev)
 {
 	return proc_thermal_resume(dev);
 }
 #else
+#define proc_thermal_pci_suspend NULL
 #define proc_thermal_pci_resume NULL
 #endif
 
-static SIMPLE_DEV_PM_OPS(proc_thermal_pci_pm, NULL, proc_thermal_pci_resume);
+static SIMPLE_DEV_PM_OPS(proc_thermal_pci_pm, proc_thermal_pci_suspend,
+			 proc_thermal_pci_resume);
 
 static const struct pci_device_id proc_thermal_pci_ids[] = {
 	{ PCI_DEVICE_DATA(INTEL, BDW_THERMAL, 0) },
diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig
index 7d942f71e532..bfd889422dd3 100644
--- a/drivers/thermal/qcom/Kconfig
+++ b/drivers/thermal/qcom/Kconfig
@@ -34,7 +34,7 @@ config QCOM_SPMI_TEMP_ALARM
 
 config QCOM_LMH
 	tristate "Qualcomm Limits Management Hardware"
-	depends on ARCH_QCOM
+	depends on ARCH_QCOM && QCOM_SCM
 	help
 	  This enables initialization of Qualcomm limits management
 	  hardware(LMh). LMh allows for hardware-enforced mitigation for cpus based on
diff --git a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
index 8494cc04aa21..824671cf494a 100644
--- a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
+++ b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
@@ -82,6 +82,7 @@ struct adc_tm5_data {
 	const u32	full_scale_code_volt;
 	unsigned int	*decimation;
 	unsigned int	*hw_settle;
+	bool		is_hc;
 };
 
 enum adc_tm5_cal_method {
@@ -146,6 +147,14 @@ static const struct adc_tm5_data adc_tm5_data_pmic = {
 					 64000, 128000 },
 };
 
+static const struct adc_tm5_data adc_tm_hc_data_pmic = {
+	.full_scale_code_volt = 0x70e4,
+	.decimation = (unsigned int []) { 256, 512, 1024 },
+	.hw_settle = (unsigned int []) { 0, 100, 200, 300, 400, 500, 600, 700,
+					 1000, 2000, 4000, 6000, 8000, 10000 },
+	.is_hc = true,
+};
+
 static int adc_tm5_read(struct adc_tm5_chip *adc_tm, u16 offset, u8 *data, int len)
 {
 	return regmap_bulk_read(adc_tm->regmap, adc_tm->base + offset, data, len);
@@ -375,6 +384,29 @@ static int adc_tm5_register_tzd(struct adc_tm5_chip *adc_tm)
 	return 0;
 }
 
+static int adc_tm_hc_init(struct adc_tm5_chip *chip)
+{
+	unsigned int i;
+	u8 buf[2];
+	int ret;
+
+	for (i = 0; i < chip->nchannels; i++) {
+		if (chip->channels[i].channel >= ADC_TM5_NUM_CHANNELS) {
+			dev_err(chip->dev, "Invalid channel %d\n", chip->channels[i].channel);
+			return -EINVAL;
+		}
+	}
+
+	buf[0] = chip->decimation;
+	buf[1] = chip->avg_samples | ADC_TM5_FAST_AVG_EN;
+
+	ret = adc_tm5_write(chip, ADC_TM5_ADC_DIG_PARAM, buf, sizeof(buf));
+	if (ret)
+		dev_err(chip->dev, "block write failed: %d\n", ret);
+
+	return ret;
+}
+
 static int adc_tm5_init(struct adc_tm5_chip *chip)
 {
 	u8 buf[4], channels_available;
@@ -591,7 +623,10 @@ static int adc_tm5_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	ret = adc_tm5_init(adc_tm);
+	if (adc_tm->data->is_hc)
+		ret = adc_tm_hc_init(adc_tm);
+	else
+		ret = adc_tm5_init(adc_tm);
 	if (ret) {
 		dev_err(dev, "adc-tm init failed\n");
 		return ret;
@@ -612,6 +647,10 @@ static const struct of_device_id adc_tm5_match_table[] = {
 		.compatible = "qcom,spmi-adc-tm5",
 		.data = &adc_tm5_data_pmic,
 	},
+	{
+		.compatible = "qcom,spmi-adc-tm-hc",
+		.data = &adc_tm_hc_data_pmic,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, adc_tm5_match_table);
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index b1162e566a70..99a8d9f3e03c 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -603,22 +603,21 @@ int get_temp_tsens_valid(const struct tsens_sensor *s, int *temp)
 	int ret;
 
 	/* VER_0 doesn't have VALID bit */
-	if (tsens_version(priv) >= VER_0_1) {
-		ret = regmap_field_read(priv->rf[valid_idx], &valid);
-		if (ret)
-			return ret;
-		while (!valid) {
-			/* Valid bit is 0 for 6 AHB clock cycles.
-			 * At 19.2MHz, 1 AHB clock is ~60ns.
-			 * We should enter this loop very, very rarely.
-			 */
-			ndelay(400);
-			ret = regmap_field_read(priv->rf[valid_idx], &valid);
-			if (ret)
-				return ret;
-		}
-	}
+	if (tsens_version(priv) == VER_0)
+		goto get_temp;
+
+	/* Valid bit is 0 for 6 AHB clock cycles.
+	 * At 19.2MHz, 1 AHB clock is ~60ns.
+	 * We should enter this loop very, very rarely.
+	 * Wait 1 us since it's the min of poll_timeout macro.
+	 * Old value was 400 ns.
+	 */
+	ret = regmap_field_read_poll_timeout(priv->rf[valid_idx], valid,
+					     valid, 1, 20 * USEC_PER_MSEC);
+	if (ret)
+		return ret;
 
+get_temp:
 	/* Valid bit is set, OK to read the temperature */
 	*temp = tsens_hw_to_mC(s, temp_idx);
 
diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
index 85228d308dd3..43eb25b167bc 100644
--- a/drivers/thermal/rcar_gen3_thermal.c
+++ b/drivers/thermal/rcar_gen3_thermal.c
@@ -34,6 +34,10 @@
 #define REG_GEN3_THCODE1	0x50
 #define REG_GEN3_THCODE2	0x54
 #define REG_GEN3_THCODE3	0x58
+#define REG_GEN3_PTAT1		0x5c
+#define REG_GEN3_PTAT2		0x60
+#define REG_GEN3_PTAT3		0x64
+#define REG_GEN3_THSCP		0x68
 
 /* IRQ{STR,MSK,EN} bits */
 #define IRQ_TEMP1		BIT(0)
@@ -55,6 +59,9 @@
 #define THCTR_PONM	BIT(6)
 #define THCTR_THSST	BIT(0)
 
+/* THSCP bits */
+#define THSCP_COR_PARA_VLD	(BIT(15) | BIT(14))
+
 #define CTEMP_MASK	0xFFF
 
 #define MCELSIUS(temp)	((temp) * 1000)
@@ -62,15 +69,6 @@
 
 #define TSC_MAX_NUM	5
 
-/* default THCODE values if FUSEs are missing */
-static const int thcodes[TSC_MAX_NUM][3] = {
-	{ 3397, 2800, 2221 },
-	{ 3393, 2795, 2216 },
-	{ 3389, 2805, 2237 },
-	{ 3415, 2694, 2195 },
-	{ 3356, 2724, 2244 },
-};
-
 /* Structure for thermal temperature calculation */
 struct equation_coefs {
 	int a1;
@@ -84,13 +82,14 @@ struct rcar_gen3_thermal_tsc {
 	struct thermal_zone_device *zone;
 	struct equation_coefs coef;
 	int tj_t;
-	unsigned int id; /* thermal channel id */
+	int thcode[3];
 };
 
 struct rcar_gen3_thermal_priv {
 	struct rcar_gen3_thermal_tsc *tscs[TSC_MAX_NUM];
 	unsigned int num_tscs;
 	void (*thermal_init)(struct rcar_gen3_thermal_tsc *tsc);
+	int ptat[3];
 };
 
 static inline u32 rcar_gen3_thermal_read(struct rcar_gen3_thermal_tsc *tsc,
@@ -133,8 +132,8 @@ static inline void rcar_gen3_thermal_write(struct rcar_gen3_thermal_tsc *tsc,
 /* no idea where these constants come from */
 #define TJ_3 -41
 
-static void rcar_gen3_thermal_calc_coefs(struct rcar_gen3_thermal_tsc *tsc,
-					 int *ptat, const int *thcode,
+static void rcar_gen3_thermal_calc_coefs(struct rcar_gen3_thermal_priv *priv,
+					 struct rcar_gen3_thermal_tsc *tsc,
 					 int ths_tj_1)
 {
 	/* TODO: Find documentation and document constant calculation formula */
@@ -143,16 +142,16 @@ static void rcar_gen3_thermal_calc_coefs(struct rcar_gen3_thermal_tsc *tsc,
 	 * Division is not scaled in BSP and if scaled it might overflow
 	 * the dividend (4095 * 4095 << 14 > INT_MAX) so keep it unscaled
 	 */
-	tsc->tj_t = (FIXPT_INT((ptat[1] - ptat[2]) * (ths_tj_1 - TJ_3))
-		     / (ptat[0] - ptat[2])) + FIXPT_INT(TJ_3);
+	tsc->tj_t = (FIXPT_INT((priv->ptat[1] - priv->ptat[2]) * (ths_tj_1 - TJ_3))
+		     / (priv->ptat[0] - priv->ptat[2])) + FIXPT_INT(TJ_3);
 
-	tsc->coef.a1 = FIXPT_DIV(FIXPT_INT(thcode[1] - thcode[2]),
+	tsc->coef.a1 = FIXPT_DIV(FIXPT_INT(tsc->thcode[1] - tsc->thcode[2]),
 				 tsc->tj_t - FIXPT_INT(TJ_3));
-	tsc->coef.b1 = FIXPT_INT(thcode[2]) - tsc->coef.a1 * TJ_3;
+	tsc->coef.b1 = FIXPT_INT(tsc->thcode[2]) - tsc->coef.a1 * TJ_3;
 
-	tsc->coef.a2 = FIXPT_DIV(FIXPT_INT(thcode[1] - thcode[0]),
+	tsc->coef.a2 = FIXPT_DIV(FIXPT_INT(tsc->thcode[1] - tsc->thcode[0]),
 				 tsc->tj_t - FIXPT_INT(ths_tj_1));
-	tsc->coef.b2 = FIXPT_INT(thcode[0]) - tsc->coef.a2 * ths_tj_1;
+	tsc->coef.b2 = FIXPT_INT(tsc->thcode[0]) - tsc->coef.a2 * ths_tj_1;
 }
 
 static int rcar_gen3_thermal_round(int temp)
@@ -174,7 +173,7 @@ static int rcar_gen3_thermal_get_temp(void *devdata, int *temp)
 	/* Read register and convert to mili Celsius */
 	reg = rcar_gen3_thermal_read(tsc, REG_GEN3_TEMP) & CTEMP_MASK;
 
-	if (reg <= thcodes[tsc->id][1])
+	if (reg <= tsc->thcode[1])
 		val = FIXPT_DIV(FIXPT_INT(reg) - tsc->coef.b1,
 				tsc->coef.a1);
 	else
@@ -253,6 +252,64 @@ static const struct soc_device_attribute r8a7795es1[] = {
 	{ /* sentinel */ }
 };
 
+static bool rcar_gen3_thermal_read_fuses(struct rcar_gen3_thermal_priv *priv)
+{
+	unsigned int i;
+	u32 thscp;
+
+	/* If fuses are not set, fallback to pseudo values. */
+	thscp = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN3_THSCP);
+	if ((thscp & THSCP_COR_PARA_VLD) != THSCP_COR_PARA_VLD) {
+		/* Default THCODE values in case FUSEs are not set. */
+		static const int thcodes[TSC_MAX_NUM][3] = {
+			{ 3397, 2800, 2221 },
+			{ 3393, 2795, 2216 },
+			{ 3389, 2805, 2237 },
+			{ 3415, 2694, 2195 },
+			{ 3356, 2724, 2244 },
+		};
+
+		priv->ptat[0] = 2631;
+		priv->ptat[1] = 1509;
+		priv->ptat[2] = 435;
+
+		for (i = 0; i < priv->num_tscs; i++) {
+			struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
+
+			tsc->thcode[0] = thcodes[i][0];
+			tsc->thcode[1] = thcodes[i][1];
+			tsc->thcode[2] = thcodes[i][2];
+		}
+
+		return false;
+	}
+
+	/*
+	 * Set the pseudo calibration points with fused values.
+	 * PTAT is shared between all TSCs but only fused for the first
+	 * TSC while THCODEs are fused for each TSC.
+	 */
+	priv->ptat[0] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN3_PTAT1) &
+		GEN3_FUSE_MASK;
+	priv->ptat[1] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN3_PTAT2) &
+		GEN3_FUSE_MASK;
+	priv->ptat[2] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN3_PTAT3) &
+		GEN3_FUSE_MASK;
+
+	for (i = 0; i < priv->num_tscs; i++) {
+		struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
+
+		tsc->thcode[0] = rcar_gen3_thermal_read(tsc, REG_GEN3_THCODE1) &
+			GEN3_FUSE_MASK;
+		tsc->thcode[1] = rcar_gen3_thermal_read(tsc, REG_GEN3_THCODE2) &
+			GEN3_FUSE_MASK;
+		tsc->thcode[2] = rcar_gen3_thermal_read(tsc, REG_GEN3_THCODE3) &
+			GEN3_FUSE_MASK;
+	}
+
+	return true;
+}
+
 static void rcar_gen3_thermal_init_r8a7795es1(struct rcar_gen3_thermal_tsc *tsc)
 {
 	rcar_gen3_thermal_write(tsc, REG_GEN3_CTSR,  CTSR_THBGR);
@@ -401,10 +458,6 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 	unsigned int i;
 	int ret;
 
-	/* default values if FUSEs are missing */
-	/* TODO: Read values from hardware on supported platforms */
-	int ptat[3] = { 2631, 1509, 435 };
-
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
@@ -439,9 +492,17 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 			ret = PTR_ERR(tsc->base);
 			goto error_unregister;
 		}
-		tsc->id = i;
 
 		priv->tscs[i] = tsc;
+	}
+
+	priv->num_tscs = i;
+
+	if (!rcar_gen3_thermal_read_fuses(priv))
+		dev_info(dev, "No calibration values fused, fallback to driver values\n");
+
+	for (i = 0; i < priv->num_tscs; i++) {
+		struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
 
 		zone = devm_thermal_zone_of_sensor_register(dev, i, tsc,
 							    &rcar_gen3_tz_of_ops);
@@ -453,7 +514,7 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 		tsc->zone = zone;
 
 		priv->thermal_init(tsc);
-		rcar_gen3_thermal_calc_coefs(tsc, ptat, thcodes[i], *ths_tj_1);
+		rcar_gen3_thermal_calc_coefs(priv, tsc, *ths_tj_1);
 
 		tsc->zone->tzp->no_hwmon = false;
 		ret = thermal_add_hwmon_sysfs(tsc->zone);
@@ -471,8 +532,6 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 		dev_info(dev, "TSC%u: Loaded %d trip points\n", i, ret);
 	}
 
-	priv->num_tscs = i;
-
 	if (!priv->num_tscs) {
 		ret = -ENODEV;
 		goto error_unregister;
diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index 657d84b9963e..dc3a9c276a09 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -1383,7 +1383,7 @@ static int rockchip_thermal_probe(struct platform_device *pdev)
 	if (IS_ERR(thermal->regs))
 		return PTR_ERR(thermal->regs);
 
-	thermal->reset = devm_reset_control_get(&pdev->dev, "tsadc-apb");
+	thermal->reset = devm_reset_control_array_get(&pdev->dev, false, false);
 	if (IS_ERR(thermal->reset)) {
 		error = PTR_ERR(thermal->reset);
 		dev_err(&pdev->dev, "failed to get tsadc reset: %d\n", error);
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 51374f4e1cca..648829ab79ff 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -375,10 +375,12 @@ static void handle_thermal_trip(struct thermal_zone_device *tz, int trip)
 	if (tz->last_temperature != THERMAL_TEMP_INVALID) {
 		if (tz->last_temperature < trip_temp &&
 		    tz->temperature >= trip_temp)
-			thermal_notify_tz_trip_up(tz->id, trip);
+			thermal_notify_tz_trip_up(tz->id, trip,
+						  tz->temperature);
 		if (tz->last_temperature >= trip_temp &&
 		    tz->temperature < (trip_temp - hyst))
-			thermal_notify_tz_trip_down(tz->id, trip);
+			thermal_notify_tz_trip_down(tz->id, trip,
+						    tz->temperature);
 	}
 
 	if (type == THERMAL_TRIP_CRITICAL || type == THERMAL_TRIP_HOT)
@@ -887,7 +889,7 @@ __thermal_cooling_device_register(struct device_node *np,
 {
 	struct thermal_cooling_device *cdev;
 	struct thermal_zone_device *pos = NULL;
-	int ret;
+	int id, ret;
 
 	if (!ops || !ops->get_max_state || !ops->get_cur_state ||
 	    !ops->set_cur_state)
@@ -901,6 +903,11 @@ __thermal_cooling_device_register(struct device_node *np,
 	if (ret < 0)
 		goto out_kfree_cdev;
 	cdev->id = ret;
+	id = ret;
+
+	ret = dev_set_name(&cdev->device, "cooling_device%d", cdev->id);
+	if (ret)
+		goto out_ida_remove;
 
 	cdev->type = kstrdup(type ? type : "", GFP_KERNEL);
 	if (!cdev->type) {
@@ -916,7 +923,6 @@ __thermal_cooling_device_register(struct device_node *np,
 	cdev->device.class = &thermal_class;
 	cdev->devdata = devdata;
 	thermal_cooling_device_setup_sysfs(cdev);
-	dev_set_name(&cdev->device, "cooling_device%d", cdev->id);
 	ret = device_register(&cdev->device);
 	if (ret)
 		goto out_kfree_type;
@@ -941,8 +947,9 @@ __thermal_cooling_device_register(struct device_node *np,
 out_kfree_type:
 	kfree(cdev->type);
 	put_device(&cdev->device);
+	cdev = NULL;
 out_ida_remove:
-	ida_simple_remove(&thermal_cdev_ida, cdev->id);
+	ida_simple_remove(&thermal_cdev_ida, id);
 out_kfree_cdev:
 	kfree(cdev);
 	return ERR_PTR(ret);
@@ -1227,6 +1234,10 @@ thermal_zone_device_register(const char *type, int trips, int mask,
 	tz->id = id;
 	strlcpy(tz->type, type, sizeof(tz->type));
 
+	result = dev_set_name(&tz->device, "thermal_zone%d", tz->id);
+	if (result)
+		goto remove_id;
+
 	if (!ops->critical)
 		ops->critical = thermal_zone_device_critical;
 
@@ -1248,7 +1259,6 @@ thermal_zone_device_register(const char *type, int trips, int mask,
 	/* A new thermal zone needs to be updated anyway. */
 	atomic_set(&tz->need_update, 1);
 
-	dev_set_name(&tz->device, "thermal_zone%d", tz->id);
 	result = device_register(&tz->device);
 	if (result)
 		goto release_device;
diff --git a/drivers/thermal/thermal_mmio.c b/drivers/thermal/thermal_mmio.c
index ded1dd0d4ef7..360b0dfdc3b0 100644
--- a/drivers/thermal/thermal_mmio.c
+++ b/drivers/thermal/thermal_mmio.c
@@ -34,7 +34,7 @@ static int thermal_mmio_get_temperature(void *private, int *temp)
 	return 0;
 }
 
-static struct thermal_zone_of_device_ops thermal_mmio_ops = {
+static const struct thermal_zone_of_device_ops thermal_mmio_ops = {
 	.get_temp = thermal_mmio_get_temperature,
 };
 
diff --git a/drivers/thermal/thermal_netlink.c b/drivers/thermal/thermal_netlink.c
index 1234dbe95895..a16dd4d5d710 100644
--- a/drivers/thermal/thermal_netlink.c
+++ b/drivers/thermal/thermal_netlink.c
@@ -121,7 +121,8 @@ static int thermal_genl_event_tz(struct param *p)
 static int thermal_genl_event_tz_trip_up(struct param *p)
 {
 	if (nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_ID, p->tz_id) ||
-	    nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_ID, p->trip_id))
+	    nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TRIP_ID, p->trip_id) ||
+	    nla_put_u32(p->msg, THERMAL_GENL_ATTR_TZ_TEMP, p->temp))
 		return -EMSGSIZE;
 
 	return 0;
@@ -285,16 +286,16 @@ int thermal_notify_tz_disable(int tz_id)
 	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_DISABLE, &p);
 }
 
-int thermal_notify_tz_trip_down(int tz_id, int trip_id)
+int thermal_notify_tz_trip_down(int tz_id, int trip_id, int temp)
 {
-	struct param p = { .tz_id = tz_id, .trip_id = trip_id };
+	struct param p = { .tz_id = tz_id, .trip_id = trip_id, .temp = temp };
 
 	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_DOWN, &p);
 }
 
-int thermal_notify_tz_trip_up(int tz_id, int trip_id)
+int thermal_notify_tz_trip_up(int tz_id, int trip_id, int temp)
 {
-	struct param p = { .tz_id = tz_id, .trip_id = trip_id };
+	struct param p = { .tz_id = tz_id, .trip_id = trip_id, .temp = temp };
 
 	return thermal_genl_send_event(THERMAL_GENL_EVENT_TZ_TRIP_UP, &p);
 }
diff --git a/drivers/thermal/thermal_netlink.h b/drivers/thermal/thermal_netlink.h
index 828d1dddfa98..e554f76291f4 100644
--- a/drivers/thermal/thermal_netlink.h
+++ b/drivers/thermal/thermal_netlink.h
@@ -11,8 +11,8 @@ int thermal_notify_tz_create(int tz_id, const char *name);
 int thermal_notify_tz_delete(int tz_id);
 int thermal_notify_tz_enable(int tz_id);
 int thermal_notify_tz_disable(int tz_id);
-int thermal_notify_tz_trip_down(int tz_id, int id);
-int thermal_notify_tz_trip_up(int tz_id, int id);
+int thermal_notify_tz_trip_down(int tz_id, int id, int temp);
+int thermal_notify_tz_trip_up(int tz_id, int id, int temp);
 int thermal_notify_tz_trip_delete(int tz_id, int id);
 int thermal_notify_tz_trip_add(int tz_id, int id, int type,
 			       int temp, int hyst);
@@ -49,12 +49,12 @@ static inline int thermal_notify_tz_disable(int tz_id)
 	return 0;
 }
 
-static inline int thermal_notify_tz_trip_down(int tz_id, int id)
+static inline int thermal_notify_tz_trip_down(int tz_id, int id, int temp)
 {
 	return 0;
 }
 
-static inline int thermal_notify_tz_trip_up(int tz_id, int id)
+static inline int thermal_notify_tz_trip_up(int tz_id, int id, int temp)
 {
 	return 0;
 }
diff --git a/drivers/thermal/thermal_sysfs.c b/drivers/thermal/thermal_sysfs.c
index 1c4aac8464a7..f154bada2906 100644
--- a/drivers/thermal/thermal_sysfs.c
+++ b/drivers/thermal/thermal_sysfs.c
@@ -610,6 +610,9 @@ cur_state_store(struct device *dev, struct device_attribute *attr,
 	unsigned long state;
 	int result;
 
+	dev_warn_once(&cdev->device,
+		      "Setting cooling device state is deprecated\n");
+	
 	if (sscanf(buf, "%ld\n", &state) != 1)
 		return -EINVAL;
 
diff --git a/drivers/thermal/uniphier_thermal.c b/drivers/thermal/uniphier_thermal.c
index bba2284412d3..4cae5561a2a3 100644
--- a/drivers/thermal/uniphier_thermal.c
+++ b/drivers/thermal/uniphier_thermal.c
@@ -358,6 +358,10 @@ static const struct of_device_id uniphier_tm_dt_ids[] = {
 		.compatible = "socionext,uniphier-pxs3-thermal",
 		.data       = &uniphier_ld20_tm_data,
 	},
+	{
+		.compatible = "socionext,uniphier-nx1-thermal",
+		.data       = &uniphier_ld20_tm_data,
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, uniphier_tm_dt_ids);