diff options
| -rw-r--r-- | Documentation/power/devices.txt | 67 | ||||
| -rw-r--r-- | Documentation/power/runtime_pm.txt | 5 | ||||
| -rw-r--r-- | arch/mn10300/include/asm/uaccess.h | 1 | ||||
| -rw-r--r-- | drivers/base/power/clock_ops.c | 4 | ||||
| -rw-r--r-- | drivers/base/power/main.c | 28 | ||||
| -rw-r--r-- | drivers/pci/pci-driver.c | 4 | ||||
| -rw-r--r-- | drivers/tty/serial/mrst_max3110.c | 5 | ||||
| -rw-r--r-- | drivers/usb/core/driver.c | 6 | ||||
| -rw-r--r-- | fs/btrfs/ctree.h | 1 | ||||
| -rw-r--r-- | fs/jfs/file.c | 6 | ||||
| -rw-r--r-- | fs/jfs/jfs_imap.c | 12 | ||||
| -rw-r--r-- | fs/jfs/jfs_incore.h | 3 | ||||
| -rw-r--r-- | fs/jfs/resize.c | 2 | ||||
| -rw-r--r-- | fs/omfs/file.c | 1 | ||||
| -rw-r--r-- | include/linux/device.h | 4 | ||||
| -rw-r--r-- | include/linux/pm.h | 3 | ||||
| -rw-r--r-- | init/calibrate.c | 14 | ||||
| -rw-r--r-- | kernel/power/user.c | 4 | ||||
| -rw-r--r-- | mm/memory_hotplug.c | 4 | ||||
| -rw-r--r-- | security/keys/request_key.c | 3 |
20 files changed, 78 insertions, 99 deletions
diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt index 88880839ece4..64565aac6e40 100644 --- a/Documentation/power/devices.txt +++ b/Documentation/power/devices.txt @@ -520,59 +520,20 @@ Support for power domains is provided through the pwr_domain field of struct device. This field is a pointer to an object of type struct dev_power_domain, defined in include/linux/pm.h, providing a set of power management callbacks analogous to the subsystem-level and device driver callbacks that are executed -for the given device during all power transitions, in addition to the respective -subsystem-level callbacks. Specifically, the power domain "suspend" callbacks -(i.e. ->runtime_suspend(), ->suspend(), ->freeze(), ->poweroff(), etc.) are -executed after the analogous subsystem-level callbacks, while the power domain -"resume" callbacks (i.e. ->runtime_resume(), ->resume(), ->thaw(), ->restore, -etc.) are executed before the analogous subsystem-level callbacks. Error codes -returned by the "suspend" and "resume" power domain callbacks are ignored. - -Power domain ->runtime_idle() callback is executed before the subsystem-level -->runtime_idle() callback and the result returned by it is not ignored. Namely, -if it returns error code, the subsystem-level ->runtime_idle() callback will not -be called and the helper function rpm_idle() executing it will return error -code. This mechanism is intended to help platforms where saving device state -is a time consuming operation and should only be carried out if all devices -in the power domain are idle, before turning off the shared power resource(s). -Namely, the power domain ->runtime_idle() callback may return error code until -the pm_runtime_idle() helper (or its asychronous version) has been called for -all devices in the power domain (it is recommended that the returned error code -be -EBUSY in those cases), preventing the subsystem-level ->runtime_idle() -callback from being run prematurely. - -The support for device power domains is only relevant to platforms needing to -use the same subsystem-level (e.g. platform bus type) and device driver power -management callbacks in many different power domain configurations and wanting -to avoid incorporating the support for power domains into the subsystem-level -callbacks. The other platforms need not implement it or take it into account -in any way. - - -System Devices --------------- -System devices (sysdevs) follow a slightly different API, which can be found in - - include/linux/sysdev.h - drivers/base/sys.c - -System devices will be suspended with interrupts disabled, and after all other -devices have been suspended. On resume, they will be resumed before any other -devices, and also with interrupts disabled. These things occur in special -"sysdev_driver" phases, which affect only system devices. - -Thus, after the suspend_noirq (or freeze_noirq or poweroff_noirq) phase, when -the non-boot CPUs are all offline and IRQs are disabled on the remaining online -CPU, then a sysdev_driver.suspend phase is carried out, and the system enters a -sleep state (or a system image is created). During resume (or after the image -has been created or loaded) a sysdev_driver.resume phase is carried out, IRQs -are enabled on the only online CPU, the non-boot CPUs are enabled, and the -resume_noirq (or thaw_noirq or restore_noirq) phase begins. - -Code to actually enter and exit the system-wide low power state sometimes -involves hardware details that are only known to the boot firmware, and -may leave a CPU running software (from SRAM or flash memory) that monitors -the system and manages its wakeup sequence. +for the given device during all power transitions, instead of the respective +subsystem-level callbacks. Specifically, if a device's pm_domain pointer is +not NULL, the ->suspend() callback from the object pointed to by it will be +executed instead of its subsystem's (e.g. bus type's) ->suspend() callback and +anlogously for all of the remaining callbacks. In other words, power management +domain callbacks, if defined for the given device, always take precedence over +the callbacks provided by the device's subsystem (e.g. bus type). + +The support for device power management domains is only relevant to platforms +needing to use the same device driver power management callbacks in many +different power domain configurations and wanting to avoid incorporating the +support for power domains into subsystem-level callbacks, for example by +modifying the platform bus type. Other platforms need not implement it or take +it into account in any way. Device Low Power (suspend) States diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt index 654097b130b4..22accb3eb40e 100644 --- a/Documentation/power/runtime_pm.txt +++ b/Documentation/power/runtime_pm.txt @@ -566,11 +566,6 @@ to do this is: pm_runtime_set_active(dev); pm_runtime_enable(dev); -The PM core always increments the run-time usage counter before calling the -->prepare() callback and decrements it after calling the ->complete() callback. -Hence disabling run-time PM temporarily like this will not cause any run-time -suspend callbacks to be lost. - 7. Generic subsystem callbacks Subsystems may wish to conserve code space by using the set of generic power diff --git a/arch/mn10300/include/asm/uaccess.h b/arch/mn10300/include/asm/uaccess.h index 3d6e60dad9d9..780560b330d9 100644 --- a/arch/mn10300/include/asm/uaccess.h +++ b/arch/mn10300/include/asm/uaccess.h @@ -15,6 +15,7 @@ * User space memory access functions */ #include <linux/thread_info.h> +#include <linux/kernel.h> #include <asm/page.h> #include <asm/errno.h> diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c index eaa8a854af03..ad367c4139b1 100644 --- a/drivers/base/power/clock_ops.c +++ b/drivers/base/power/clock_ops.c @@ -387,7 +387,7 @@ static int pm_runtime_clk_notify(struct notifier_block *nb, clknb = container_of(nb, struct pm_clk_notifier_block, nb); switch (action) { - case BUS_NOTIFY_ADD_DEVICE: + case BUS_NOTIFY_BIND_DRIVER: if (clknb->con_ids[0]) { for (con_id = clknb->con_ids; *con_id; con_id++) enable_clock(dev, *con_id); @@ -395,7 +395,7 @@ static int pm_runtime_clk_notify(struct notifier_block *nb, enable_clock(dev, NULL); } break; - case BUS_NOTIFY_DEL_DEVICE: + case BUS_NOTIFY_UNBOUND_DRIVER: if (clknb->con_ids[0]) { for (con_id = clknb->con_ids; *con_id; con_id++) disable_clock(dev, *con_id); diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index aa6320207745..06f09bf89cb2 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -57,7 +57,8 @@ static int async_error; */ void device_pm_init(struct device *dev) { - dev->power.in_suspend = false; + dev->power.is_prepared = false; + dev->power.is_suspended = false; init_completion(&dev->power.completion); complete_all(&dev->power.completion); dev->power.wakeup = NULL; @@ -91,7 +92,7 @@ void device_pm_add(struct device *dev) pr_debug("PM: Adding info for %s:%s\n", dev->bus ? dev->bus->name : "No Bus", dev_name(dev)); mutex_lock(&dpm_list_mtx); - if (dev->parent && dev->parent->power.in_suspend) + if (dev->parent && dev->parent->power.is_prepared) dev_warn(dev, "parent %s should not be sleeping\n", dev_name(dev->parent)); list_add_tail(&dev->power.entry, &dpm_list); @@ -511,7 +512,14 @@ static int device_resume(struct device *dev, pm_message_t state, bool async) dpm_wait(dev->parent, async); device_lock(dev); - dev->power.in_suspend = false; + /* + * This is a fib. But we'll allow new children to be added below + * a resumed device, even if the device hasn't been completed yet. + */ + dev->power.is_prepared = false; + + if (!dev->power.is_suspended) + goto Unlock; if (dev->pwr_domain) { pm_dev_dbg(dev, state, "power domain "); @@ -548,6 +556,9 @@ static int device_resume(struct device *dev, pm_message_t state, bool async) } End: + dev->power.is_suspended = false; + + Unlock: device_unlock(dev); complete_all(&dev->power.completion); @@ -670,7 +681,7 @@ void dpm_complete(pm_message_t state) struct device *dev = to_device(dpm_prepared_list.prev); get_device(dev); - dev->power.in_suspend = false; + dev->power.is_prepared = false; list_move(&dev->power.entry, &list); mutex_unlock(&dpm_list_mtx); @@ -835,11 +846,11 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async) device_lock(dev); if (async_error) - goto End; + goto Unlock; if (pm_wakeup_pending()) { async_error = -EBUSY; - goto End; + goto Unlock; } if (dev->pwr_domain) { @@ -877,6 +888,9 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async) } End: + dev->power.is_suspended = !error; + + Unlock: device_unlock(dev); complete_all(&dev->power.completion); @@ -1042,7 +1056,7 @@ int dpm_prepare(pm_message_t state) put_device(dev); break; } - dev->power.in_suspend = true; + dev->power.is_prepared = true; if (!list_empty(&dev->power.entry)) list_move_tail(&dev->power.entry, &dpm_prepared_list); put_device(dev); diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 135df164a4c1..46767c53917a 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -624,7 +624,7 @@ static int pci_pm_prepare(struct device *dev) * system from the sleep state, we'll have to prevent it from signaling * wake-up. */ - pm_runtime_resume(dev); + pm_runtime_get_sync(dev); if (drv && drv->pm && drv->pm->prepare) error = drv->pm->prepare(dev); @@ -638,6 +638,8 @@ static void pci_pm_complete(struct device *dev) if (drv && drv->pm && drv->pm->complete) drv->pm->complete(dev); + + pm_runtime_put_sync(dev); } #else /* !CONFIG_PM_SLEEP */ diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c index 1bd28450ca40..a764bf99743b 100644 --- a/drivers/tty/serial/mrst_max3110.c +++ b/drivers/tty/serial/mrst_max3110.c @@ -421,7 +421,6 @@ static int max3110_main_thread(void *_max) int ret = 0; struct circ_buf *xmit = &max->con_xmit; - init_waitqueue_head(wq); pr_info(PR_FMT "start main thread\n"); do { @@ -823,7 +822,7 @@ static int __devinit serial_m3110_probe(struct spi_device *spi) res = RC_TAG; ret = max3110_write_then_read(max, (u8 *)&res, (u8 *)&res, 2, 0); if (ret < 0 || res == 0 || res == 0xffff) { - printk(KERN_ERR "MAX3111 deemed not present (conf reg %04x)", + dev_dbg(&spi->dev, "MAX3111 deemed not present (conf reg %04x)", res); ret = -ENODEV; goto err_get_page; @@ -838,6 +837,8 @@ static int __devinit serial_m3110_probe(struct spi_device *spi) max->con_xmit.head = 0; max->con_xmit.tail = 0; + init_waitqueue_head(&max->wq); + max->main_thread = kthread_run(max3110_main_thread, max, "max3110_main"); if (IS_ERR(max->main_thread)) { diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index e35a17687c05..aa3cc465a601 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -375,7 +375,7 @@ static int usb_unbind_interface(struct device *dev) * Just re-enable it without affecting the endpoint toggles. */ usb_enable_interface(udev, intf, false); - } else if (!error && !intf->dev.power.in_suspend) { + } else if (!error && !intf->dev.power.is_prepared) { r = usb_set_interface(udev, intf->altsetting[0]. desc.bInterfaceNumber, 0); if (r < 0) @@ -960,7 +960,7 @@ void usb_rebind_intf(struct usb_interface *intf) } /* Try to rebind the interface */ - if (!intf->dev.power.in_suspend) { + if (!intf->dev.power.is_prepared) { intf->needs_binding = 0; rc = device_attach(&intf->dev); if (rc < 0) @@ -1107,7 +1107,7 @@ static int usb_resume_interface(struct usb_device *udev, if (intf->condition == USB_INTERFACE_UNBOUND) { /* Carry out a deferred switch to altsetting 0 */ - if (intf->needs_altsetting0 && !intf->dev.power.in_suspend) { + if (intf->needs_altsetting0 && !intf->dev.power.is_prepared) { usb_set_interface(udev, intf->altsetting[0]. desc.bInterfaceNumber, 0); intf->needs_altsetting0 = 0; diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 300628795fdb..f30ac05dbda7 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -19,7 +19,6 @@ #ifndef __BTRFS_CTREE__ #define __BTRFS_CTREE__ -#include <linux/version.h> #include <linux/mm.h> #include <linux/highmem.h> #include <linux/fs.h> diff --git a/fs/jfs/file.c b/fs/jfs/file.c index c5ce6c1d1ff4..2f3f531f3606 100644 --- a/fs/jfs/file.c +++ b/fs/jfs/file.c @@ -66,9 +66,9 @@ static int jfs_open(struct inode *inode, struct file *file) struct jfs_inode_info *ji = JFS_IP(inode); spin_lock_irq(&ji->ag_lock); if (ji->active_ag == -1) { - ji->active_ag = ji->agno; - atomic_inc( - &JFS_SBI(inode->i_sb)->bmap->db_active[ji->agno]); + struct jfs_sb_info *jfs_sb = JFS_SBI(inode->i_sb); + ji->active_ag = BLKTOAG(addressPXD(&ji->ixpxd), jfs_sb); + atomic_inc( &jfs_sb->bmap->db_active[ji->active_ag]); } spin_unlock_irq(&ji->ag_lock); } diff --git a/fs/jfs/jfs_imap.c b/fs/jfs/jfs_imap.c index ed53a4740168..b78b2f978f04 100644 --- a/fs/jfs/jfs_imap.c +++ b/fs/jfs/jfs_imap.c @@ -397,7 +397,7 @@ int diRead(struct inode *ip) release_metapage(mp); /* set the ag for the inode */ - JFS_IP(ip)->agno = BLKTOAG(agstart, sbi); + JFS_IP(ip)->agstart = agstart; JFS_IP(ip)->active_ag = -1; return (rc); @@ -901,7 +901,7 @@ int diFree(struct inode *ip) /* get the allocation group for this ino. */ - agno = JFS_IP(ip)->agno; + agno = BLKTOAG(JFS_IP(ip)->agstart, JFS_SBI(ip->i_sb)); /* Lock the AG specific inode map information */ @@ -1315,12 +1315,11 @@ int diFree(struct inode *ip) static inline void diInitInode(struct inode *ip, int iagno, int ino, int extno, struct iag * iagp) { - struct jfs_sb_info *sbi = JFS_SBI(ip->i_sb); struct jfs_inode_info *jfs_ip = JFS_IP(ip); ip->i_ino = (iagno << L2INOSPERIAG) + ino; jfs_ip->ixpxd = iagp->inoext[extno]; - jfs_ip->agno = BLKTOAG(le64_to_cpu(iagp->agstart), sbi); + jfs_ip->agstart = le64_to_cpu(iagp->agstart); jfs_ip->active_ag = -1; } @@ -1379,7 +1378,7 @@ int diAlloc(struct inode *pip, bool dir, struct inode *ip) */ /* get the ag number of this iag */ - agno = JFS_IP(pip)->agno; + agno = BLKTOAG(JFS_IP(pip)->agstart, JFS_SBI(pip->i_sb)); if (atomic_read(&JFS_SBI(pip->i_sb)->bmap->db_active[agno])) { /* @@ -2921,10 +2920,9 @@ int diExtendFS(struct inode *ipimap, struct inode *ipbmap) continue; } - /* agstart that computes to the same ag is treated as same; */ agstart = le64_to_cpu(iagp->agstart); - /* iagp->agstart = agstart & ~(mp->db_agsize - 1); */ n = agstart >> mp->db_agl2size; + iagp->agstart = cpu_to_le64((s64)n << mp->db_agl2size); /* compute backed inodes */ numinos = (EXTSPERIAG - le32_to_cpu(iagp->nfreeexts)) diff --git a/fs/jfs/jfs_incore.h b/fs/jfs/jfs_incore.h index 1439f119ec83..584a4a1a6e81 100644 --- a/fs/jfs/jfs_incore.h +++ b/fs/jfs/jfs_incore.h @@ -50,8 +50,9 @@ struct jfs_inode_info { short btindex; /* btpage entry index*/ struct inode *ipimap; /* inode map */ unsigned long cflag; /* commit flags */ + u64 agstart; /* agstart of the containing IAG */ u16 bxflag; /* xflag of pseudo buffer? */ - unchar agno; /* ag number */ + unchar pad; signed char active_ag; /* ag currently allocating from */ lid_t blid; /* lid of pseudo buffer? */ lid_t atlhead; /* anonymous tlock list head */ diff --git a/fs/jfs/resize.c b/fs/jfs/resize.c index 8ea5efb5a34e..8d0c1c7c0820 100644 --- a/fs/jfs/resize.c +++ b/fs/jfs/resize.c @@ -80,7 +80,7 @@ int jfs_extendfs(struct super_block *sb, s64 newLVSize, int newLogSize) int log_formatted = 0; struct inode *iplist[1]; struct jfs_superblock *j_sb, *j_sb2; - uint old_agsize; + s64 old_agsize; int agsizechanged = 0; struct buffer_head *bh, *bh2; diff --git a/fs/omfs/file.c b/fs/omfs/file.c index d738a7e493dd..2c6d95257a4d 100644 --- a/fs/omfs/file.c +++ b/fs/omfs/file.c @@ -4,7 +4,6 @@ * Released under GPL v2. */ -#include <linux/version.h> #include <linux/module.h> #include <linux/fs.h> #include <linux/buffer_head.h> diff --git a/include/linux/device.h b/include/linux/device.h index c66111affca9..553fd37b173b 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -654,13 +654,13 @@ static inline int device_is_registered(struct device *dev) static inline void device_enable_async_suspend(struct device *dev) { - if (!dev->power.in_suspend) + if (!dev->power.is_prepared) dev->power.async_suspend = true; } static inline void device_disable_async_suspend(struct device *dev) { - if (!dev->power.in_suspend) + if (!dev->power.is_prepared) dev->power.async_suspend = false; } diff --git a/include/linux/pm.h b/include/linux/pm.h index 3160648ccdda..411e4f4be52b 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -425,7 +425,8 @@ struct dev_pm_info { pm_message_t power_state; unsigned int can_wakeup:1; unsigned int async_suspend:1; - unsigned int in_suspend:1; /* Owned by the PM core */ + bool is_prepared:1; /* Owned by the PM core */ + bool is_suspended:1; /* Ditto */ spinlock_t lock; #ifdef CONFIG_PM_SLEEP struct list_head entry; diff --git a/init/calibrate.c b/init/calibrate.c index 2568d22a304e..aae2f40fea4c 100644 --- a/init/calibrate.c +++ b/init/calibrate.c @@ -245,30 +245,32 @@ recalibrate: void __cpuinit calibrate_delay(void) { + unsigned long lpj; static bool printed; if (preset_lpj) { - loops_per_jiffy = preset_lpj; + lpj = preset_lpj; if (!printed) pr_info("Calibrating delay loop (skipped) " "preset value.. "); } else if ((!printed) && lpj_fine) { - loops_per_jiffy = lpj_fine; + lpj = lpj_fine; pr_info("Calibrating delay loop (skipped), " "value calculated using timer frequency.. "); - } else if ((loops_per_jiffy = calibrate_delay_direct()) != 0) { + } else if ((lpj = calibrate_delay_direct()) != 0) { if (!printed) pr_info("Calibrating delay using timer " "specific routine.. "); } else { if (!printed) pr_info("Calibrating delay loop... "); - loops_per_jiffy = calibrate_delay_converge(); + lpj = calibrate_delay_converge(); } if (!printed) pr_cont("%lu.%02lu BogoMIPS (lpj=%lu)\n", - loops_per_jiffy/(500000/HZ), - (loops_per_jiffy/(5000/HZ)) % 100, loops_per_jiffy); + lpj/(500000/HZ), + (lpj/(5000/HZ)) % 100, lpj); + loops_per_jiffy = lpj; printed = true; } diff --git a/kernel/power/user.c b/kernel/power/user.c index 7d02d33be699..42ddbc6f0de6 100644 --- a/kernel/power/user.c +++ b/kernel/power/user.c @@ -113,8 +113,10 @@ static int snapshot_open(struct inode *inode, struct file *filp) if (error) pm_notifier_call_chain(PM_POST_RESTORE); } - if (error) + if (error) { + free_basic_memory_bitmaps(); atomic_inc(&snapshot_device_available); + } data->frozen = 0; data->ready = 0; data->platform_support = 0; diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index 02159c755136..c46887b5a11e 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -498,7 +498,9 @@ static pg_data_t __ref *hotadd_new_pgdat(int nid, u64 start) * The node we allocated has no zone fallback lists. For avoiding * to access not-initialized zonelist, build here. */ + mutex_lock(&zonelists_mutex); build_all_zonelists(NULL); + mutex_unlock(&zonelists_mutex); return pgdat; } @@ -521,7 +523,7 @@ int mem_online_node(int nid) lock_memory_hotplug(); pgdat = hotadd_new_pgdat(nid, 0); - if (pgdat) { + if (!pgdat) { ret = -ENOMEM; goto out; } diff --git a/security/keys/request_key.c b/security/keys/request_key.c index 8e319a416eec..82465328c39b 100644 --- a/security/keys/request_key.c +++ b/security/keys/request_key.c @@ -469,7 +469,7 @@ static struct key *construct_key_and_link(struct key_type *type, } else if (ret == -EINPROGRESS) { ret = 0; } else { - key = ERR_PTR(ret); + goto couldnt_alloc_key; } key_put(dest_keyring); @@ -479,6 +479,7 @@ static struct key *construct_key_and_link(struct key_type *type, construction_failed: key_negate_and_link(key, key_negative_timeout, NULL, NULL); key_put(key); +couldnt_alloc_key: key_put(dest_keyring); kleave(" = %d", ret); return ERR_PTR(ret); |