diff options
| -rw-r--r-- | Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt | 56 | ||||
| -rw-r--r-- | drivers/clk/meson/Kconfig | 19 | ||||
| -rw-r--r-- | drivers/clk/meson/Makefile | 2 | ||||
| -rw-r--r-- | drivers/clk/meson/axg.c | 37 | ||||
| -rw-r--r-- | drivers/clk/meson/clk-audio-divider.c | 2 | ||||
| -rw-r--r-- | drivers/clk/meson/clk-phase.c | 63 | ||||
| -rw-r--r-- | drivers/clk/meson/clk-triphase.c | 68 | ||||
| -rw-r--r-- | drivers/clk/meson/clkc-audio.h | 20 | ||||
| -rw-r--r-- | drivers/clk/meson/clkc.h | 8 | ||||
| -rw-r--r-- | drivers/clk/meson/gxbb.c | 37 | ||||
| -rw-r--r-- | include/dt-bindings/clock/axg-audio-clkc.h | 94 | ||||
| -rw-r--r-- | include/dt-bindings/clock/axg-clkc.h | 4 | ||||
| -rw-r--r-- | include/dt-bindings/clock/gxbb-clkc.h | 1 |
13 files changed, 332 insertions, 79 deletions
diff --git a/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt new file mode 100644 index 000000000000..61777ad24f61 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.txt @@ -0,0 +1,56 @@ +* Amlogic AXG Audio Clock Controllers + +The Amlogic AXG audio clock controller generates and supplies clock to the +other elements of the audio subsystem, such as fifos, i2s, spdif and pdm +devices. + +Required Properties: + +- compatible : should be "amlogic,axg-audio-clkc" for the A113X and A113D +- reg : physical base address of the clock controller and length of + memory mapped region. +- clocks : a list of phandle + clock-specifier pairs for the clocks listed + in clock-names. +- clock-names : must contain the following: + * "pclk" - Main peripheral bus clock + may contain the following: + * "mst_in[0-7]" - 8 input plls to generate clock signals + * "slv_sclk[0-9]" - 10 slave bit clocks provided by external + components. + * "slv_lrclk[0-9]" - 10 slave sample clocks provided by external + components. +- resets : phandle of the internal reset line +- #clock-cells : should be 1. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. All available clocks are defined as +preprocessor macros in the dt-bindings/clock/axg-audio-clkc.h header and can be +used in device tree sources. + +Example: + +clkc_audio: clock-controller@0 { + compatible = "amlogic,axg-audio-clkc"; + reg = <0x0 0x0 0x0 0xb4>; + #clock-cells = <1>; + + clocks = <&clkc CLKID_AUDIO>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL3>, + <&clkc CLKID_HIFI_PLL>, + <&clkc CLKID_FCLK_DIV3>, + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_GP0_PLL>; + clock-names = "pclk", + "mst_in0", + "mst_in1", + "mst_in2", + "mst_in3", + "mst_in4", + "mst_in5", + "mst_in6", + "mst_in7"; + resets = <&reset RESET_AUDIO>; +}; diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig index 815659eebea3..9ad95966aa3d 100644 --- a/drivers/clk/meson/Kconfig +++ b/drivers/clk/meson/Kconfig @@ -1,13 +1,19 @@ config COMMON_CLK_AMLOGIC bool - depends on OF depends on ARCH_MESON || COMPILE_TEST + select COMMON_CLK_REGMAP_MESON + +config COMMON_CLK_AMLOGIC_AUDIO + bool + depends on ARCH_MESON || COMPILE_TEST + select COMMON_CLK_AMLOGIC config COMMON_CLK_MESON_AO bool depends on OF depends on ARCH_MESON || COMPILE_TEST select COMMON_CLK_REGMAP_MESON + select RESET_CONTROLLER config COMMON_CLK_REGMAP_MESON bool @@ -15,9 +21,8 @@ config COMMON_CLK_REGMAP_MESON config COMMON_CLK_MESON8B bool - depends on COMMON_CLK_AMLOGIC + select COMMON_CLK_AMLOGIC select RESET_CONTROLLER - select COMMON_CLK_REGMAP_MESON help Support for the clock controller on AmLogic S802 (Meson8), S805 (Meson8b) and S812 (Meson8m2) devices. Say Y if you @@ -25,10 +30,8 @@ config COMMON_CLK_MESON8B config COMMON_CLK_GXBB bool - depends on COMMON_CLK_AMLOGIC - select RESET_CONTROLLER + select COMMON_CLK_AMLOGIC select COMMON_CLK_MESON_AO - select COMMON_CLK_REGMAP_MESON select MFD_SYSCON help Support for the clock controller on AmLogic S905 devices, aka gxbb. @@ -36,10 +39,8 @@ config COMMON_CLK_GXBB config COMMON_CLK_AXG bool - depends on COMMON_CLK_AMLOGIC - select RESET_CONTROLLER + select COMMON_CLK_AMLOGIC select COMMON_CLK_MESON_AO - select COMMON_CLK_REGMAP_MESON select MFD_SYSCON help Support for the clock controller on AmLogic A113D devices, aka axg. diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile index d0d13aeb369a..74ec070b0974 100644 --- a/drivers/clk/meson/Makefile +++ b/drivers/clk/meson/Makefile @@ -3,6 +3,8 @@ # obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-mpll.o clk-audio-divider.o +obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-phase.o +obj-$(CONFIG_COMMON_CLK_AMLOGIC_AUDIO) += clk-triphase.o obj-$(CONFIG_COMMON_CLK_MESON_AO) += meson-aoclk.o obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-32k.o diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c index bd4dbc696b88..3fb884db1b10 100644 --- a/drivers/clk/meson/axg.c +++ b/drivers/clk/meson/axg.c @@ -12,7 +12,6 @@ #include <linux/clk.h> #include <linux/clk-provider.h> #include <linux/init.h> -#include <linux/of_address.h> #include <linux/of_device.h> #include <linux/mfd/syscon.h> #include <linux/platform_device.h> @@ -995,49 +994,17 @@ static const struct of_device_id clkc_match_table[] = { {} }; -static const struct regmap_config clkc_regmap_config = { - .reg_bits = 32, - .val_bits = 32, - .reg_stride = 4, -}; - static int axg_clkc_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct resource *res; - void __iomem *clk_base = NULL; struct regmap *map; int ret, i; /* Get the hhi system controller node if available */ map = syscon_node_to_regmap(of_get_parent(dev->of_node)); if (IS_ERR(map)) { - dev_err(dev, - "failed to get HHI regmap - Trying obsolete regs\n"); - - /* - * FIXME: HHI registers should be accessed through - * the appropriate system controller. This is required because - * there is more than just clocks in this register space - * - * This fallback method is only provided temporarily until - * all the platform DTs are properly using the syscon node - */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -EINVAL; - - - clk_base = devm_ioremap(dev, res->start, resource_size(res)); - if (!clk_base) { - dev_err(dev, "Unable to map clk base\n"); - return -ENXIO; - } - - map = devm_regmap_init_mmio(dev, clk_base, - &clkc_regmap_config); - if (IS_ERR(map)) - return PTR_ERR(map); + dev_err(dev, "failed to get HHI regmap\n"); + return PTR_ERR(map); } /* Populate regmap for the regmap backed clocks */ diff --git a/drivers/clk/meson/clk-audio-divider.c b/drivers/clk/meson/clk-audio-divider.c index 58f546e04807..e4cf96ba704e 100644 --- a/drivers/clk/meson/clk-audio-divider.c +++ b/drivers/clk/meson/clk-audio-divider.c @@ -51,7 +51,7 @@ static unsigned long audio_divider_recalc_rate(struct clk_hw *hw, struct meson_clk_audio_div_data *adiv = meson_clk_audio_div_data(clk); unsigned long divider; - divider = meson_parm_read(clk->map, &adiv->div); + divider = meson_parm_read(clk->map, &adiv->div) + 1; return DIV_ROUND_UP_ULL((u64)parent_rate, divider); } diff --git a/drivers/clk/meson/clk-phase.c b/drivers/clk/meson/clk-phase.c new file mode 100644 index 000000000000..cba43748ce3d --- /dev/null +++ b/drivers/clk/meson/clk-phase.c @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (c) 2018 BayLibre, SAS. + * Author: Jerome Brunet <jbrunet@baylibre.com> + */ + +#include <linux/clk-provider.h> +#include "clkc.h" + +#define phase_step(_width) (360 / (1 << (_width))) + +static inline struct meson_clk_phase_data * +meson_clk_phase_data(struct clk_regmap *clk) +{ + return (struct meson_clk_phase_data *)clk->data; +} + +int meson_clk_degrees_from_val(unsigned int val, unsigned int width) +{ + return phase_step(width) * val; +} +EXPORT_SYMBOL_GPL(meson_clk_degrees_from_val); + +unsigned int meson_clk_degrees_to_val(int degrees, unsigned int width) +{ + unsigned int val = DIV_ROUND_CLOSEST(degrees, phase_step(width)); + + /* + * This last calculation is here for cases when degrees is rounded + * to 360, in which case val == (1 << width). + */ + return val % (1 << width); +} +EXPORT_SYMBOL_GPL(meson_clk_degrees_to_val); + +static int meson_clk_phase_get_phase(struct clk_hw *hw) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_clk_phase_data *phase = meson_clk_phase_data(clk); + unsigned int val; + + val = meson_parm_read(clk->map, &phase->ph); + + return meson_clk_degrees_from_val(val, phase->ph.width); +} + +static int meson_clk_phase_set_phase(struct clk_hw *hw, int degrees) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_clk_phase_data *phase = meson_clk_phase_data(clk); + unsigned int val; + + val = meson_clk_degrees_to_val(degrees, phase->ph.width); + meson_parm_write(clk->map, &phase->ph, val); + + return 0; +} + +const struct clk_ops meson_clk_phase_ops = { + .get_phase = meson_clk_phase_get_phase, + .set_phase = meson_clk_phase_set_phase, +}; +EXPORT_SYMBOL_GPL(meson_clk_phase_ops); diff --git a/drivers/clk/meson/clk-triphase.c b/drivers/clk/meson/clk-triphase.c new file mode 100644 index 000000000000..4a59936251e5 --- /dev/null +++ b/drivers/clk/meson/clk-triphase.c @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (c) 2018 BayLibre, SAS. + * Author: Jerome Brunet <jbrunet@baylibre.com> + */ + +#include <linux/clk-provider.h> +#include "clkc-audio.h" + +/* + * This is a special clock for the audio controller. + * The phase of mst_sclk clock output can be controlled independently + * for the outside world (ph0), the tdmout (ph1) and tdmin (ph2). + * Controlling these 3 phases as just one makes things simpler and + * give the same clock view to all the element on the i2s bus. + * If necessary, we can still control the phase in the tdm block + * which makes these independent control redundant. + */ +static inline struct meson_clk_triphase_data * +meson_clk_triphase_data(struct clk_regmap *clk) +{ + return (struct meson_clk_triphase_data *)clk->data; +} + +static void meson_clk_triphase_sync(struct clk_hw *hw) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_clk_triphase_data *tph = meson_clk_triphase_data(clk); + unsigned int val; + + /* Get phase 0 and sync it to phase 1 and 2 */ + val = meson_parm_read(clk->map, &tph->ph0); + meson_parm_write(clk->map, &tph->ph1, val); + meson_parm_write(clk->map, &tph->ph2, val); +} + +static int meson_clk_triphase_get_phase(struct clk_hw *hw) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_clk_triphase_data *tph = meson_clk_triphase_data(clk); + unsigned int val; + + /* Phase are in sync, reading phase 0 is enough */ + val = meson_parm_read(clk->map, &tph->ph0); + + return meson_clk_degrees_from_val(val, tph->ph0.width); +} + +static int meson_clk_triphase_set_phase(struct clk_hw *hw, int degrees) +{ + struct clk_regmap *clk = to_clk_regmap(hw); + struct meson_clk_triphase_data *tph = meson_clk_triphase_data(clk); + unsigned int val; + + val = meson_clk_degrees_to_val(degrees, tph->ph0.width); + meson_parm_write(clk->map, &tph->ph0, val); + meson_parm_write(clk->map, &tph->ph1, val); + meson_parm_write(clk->map, &tph->ph2, val); + + return 0; +} + +const struct clk_ops meson_clk_triphase_ops = { + .init = meson_clk_triphase_sync, + .get_phase = meson_clk_triphase_get_phase, + .set_phase = meson_clk_triphase_set_phase, +}; +EXPORT_SYMBOL_GPL(meson_clk_triphase_ops); diff --git a/drivers/clk/meson/clkc-audio.h b/drivers/clk/meson/clkc-audio.h new file mode 100644 index 000000000000..286ff1201258 --- /dev/null +++ b/drivers/clk/meson/clkc-audio.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2018 BayLibre, SAS. + * Author: Jerome Brunet <jbrunet@baylibre.com> + */ + +#ifndef __MESON_CLKC_AUDIO_H +#define __MESON_CLKC_AUDIO_H + +#include "clkc.h" + +struct meson_clk_triphase_data { + struct parm ph0; + struct parm ph1; + struct parm ph2; +}; + +extern const struct clk_ops meson_clk_triphase_ops; + +#endif /* __MESON_CLKC_AUDIO_H */ diff --git a/drivers/clk/meson/clkc.h b/drivers/clk/meson/clkc.h index 2fb084330ee9..fd520ccdd1be 100644 --- a/drivers/clk/meson/clkc.h +++ b/drivers/clk/meson/clkc.h @@ -96,6 +96,13 @@ struct meson_clk_audio_div_data { u8 flags; }; +struct meson_clk_phase_data { + struct parm ph; +}; + +int meson_clk_degrees_from_val(unsigned int val, unsigned int width); +unsigned int meson_clk_degrees_to_val(int degrees, unsigned int width); + #define MESON_GATE(_name, _reg, _bit) \ struct clk_regmap _name = { \ .data = &(struct clk_regmap_gate_data){ \ @@ -119,5 +126,6 @@ extern const struct clk_ops meson_clk_mpll_ro_ops; extern const struct clk_ops meson_clk_mpll_ops; extern const struct clk_ops meson_clk_audio_divider_ro_ops; extern const struct clk_ops meson_clk_audio_divider_ops; +extern const struct clk_ops meson_clk_phase_ops; #endif /* __CLKC_H */ diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c index 240658404367..297ebc391475 100644 --- a/drivers/clk/meson/gxbb.c +++ b/drivers/clk/meson/gxbb.c @@ -7,7 +7,6 @@ #include <linux/clk.h> #include <linux/clk-provider.h> #include <linux/init.h> -#include <linux/of_address.h> #include <linux/of_device.h> #include <linux/mfd/syscon.h> #include <linux/platform_device.h> @@ -498,6 +497,7 @@ static struct clk_regmap gxbb_fclk_div2 = { .ops = &clk_regmap_gate_ops, .parent_names = (const char *[]){ "fclk_div2_div" }, .num_parents = 1, + .flags = CLK_IS_CRITICAL, }, }; @@ -2227,17 +2227,9 @@ static const struct of_device_id clkc_match_table[] = { {}, }; -static const struct regmap_config clkc_regmap_config = { - .reg_bits = 32, - .val_bits = 32, - .reg_stride = 4, -}; - static int gxbb_clkc_probe(struct platform_device *pdev) { const struct clkc_data *clkc_data; - struct resource *res; - void __iomem *clk_base; struct regmap *map; int ret, i; struct device *dev = &pdev->dev; @@ -2249,31 +2241,8 @@ static int gxbb_clkc_probe(struct platform_device *pdev) /* Get the hhi system controller node if available */ map = syscon_node_to_regmap(of_get_parent(dev->of_node)); if (IS_ERR(map)) { - dev_err(dev, - "failed to get HHI regmap - Trying obsolete regs\n"); - - /* - * FIXME: HHI registers should be accessed through - * the appropriate system controller. This is required because - * there is more than just clocks in this register space - * - * This fallback method is only provided temporarily until - * all the platform DTs are properly using the syscon node - */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -EINVAL; - - clk_base = devm_ioremap(dev, res->start, resource_size(res)); - if (!clk_base) { - dev_err(dev, "Unable to map clk base\n"); - return -ENXIO; - } - - map = devm_regmap_init_mmio(dev, clk_base, - &clkc_regmap_config); - if (IS_ERR(map)) - return PTR_ERR(map); + dev_err(dev, "failed to get HHI regmap\n"); + return PTR_ERR(map); } /* Populate regmap for the common regmap backed clocks */ diff --git a/include/dt-bindings/clock/axg-audio-clkc.h b/include/dt-bindings/clock/axg-audio-clkc.h new file mode 100644 index 000000000000..fd9c362099d9 --- /dev/null +++ b/include/dt-bindings/clock/axg-audio-clkc.h @@ -0,0 +1,94 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ +/* + * Copyright (c) 2018 Baylibre SAS. + * Author: Jerome Brunet <jbrunet@baylibre.com> + */ + +#ifndef __AXG_AUDIO_CLKC_BINDINGS_H +#define __AXG_AUDIO_CLKC_BINDINGS_H + +#define AUD_CLKID_SLV_SCLK0 9 +#define AUD_CLKID_SLV_SCLK1 10 +#define AUD_CLKID_SLV_SCLK2 11 +#define AUD_CLKID_SLV_SCLK3 12 +#define AUD_CLKID_SLV_SCLK4 13 +#define AUD_CLKID_SLV_SCLK5 14 +#define AUD_CLKID_SLV_SCLK6 15 +#define AUD_CLKID_SLV_SCLK7 16 +#define AUD_CLKID_SLV_SCLK8 17 +#define AUD_CLKID_SLV_SCLK9 18 +#define AUD_CLKID_SLV_LRCLK0 19 +#define AUD_CLKID_SLV_LRCLK1 20 +#define AUD_CLKID_SLV_LRCLK2 21 +#define AUD_CLKID_SLV_LRCLK3 22 +#define AUD_CLKID_SLV_LRCLK4 23 +#define AUD_CLKID_SLV_LRCLK5 24 +#define AUD_CLKID_SLV_LRCLK6 25 +#define AUD_CLKID_SLV_LRCLK7 26 +#define AUD_CLKID_SLV_LRCLK8 27 +#define AUD_CLKID_SLV_LRCLK9 28 +#define AUD_CLKID_DDR_ARB 29 +#define AUD_CLKID_PDM 30 +#define AUD_CLKID_TDMIN_A 31 +#define AUD_CLKID_TDMIN_B 32 +#define AUD_CLKID_TDMIN_C 33 +#define AUD_CLKID_TDMIN_LB 34 +#define AUD_CLKID_TDMOUT_A 35 +#define AUD_CLKID_TDMOUT_B 36 +#define AUD_CLKID_TDMOUT_C 37 +#define AUD_CLKID_FRDDR_A 38 +#define AUD_CLKID_FRDDR_B 39 +#define AUD_CLKID_FRDDR_C 40 +#define AUD_CLKID_TODDR_A 41 +#define AUD_CLKID_TODDR_B 42 +#define AUD_CLKID_TODDR_C 43 +#define AUD_CLKID_LOOPBACK 44 +#define AUD_CLKID_SPDIFIN 45 +#define AUD_CLKID_SPDIFOUT 46 +#define AUD_CLKID_RESAMPLE 47 +#define AUD_CLKID_POWER_DETECT 48 +#define AUD_CLKID_MST_A_MCLK 49 +#define AUD_CLKID_MST_B_MCLK 50 +#define AUD_CLKID_MST_C_MCLK 51 +#define AUD_CLKID_MST_D_MCLK 52 +#define AUD_CLKID_MST_E_MCLK 53 +#define AUD_CLKID_MST_F_MCLK 54 +#define AUD_CLKID_SPDIFOUT_CLK 55 +#define AUD_CLKID_SPDIFIN_CLK 56 +#define AUD_CLKID_PDM_DCLK 57 +#define AUD_CLKID_PDM_SYSCLK 58 +#define AUD_CLKID_MST_A_SCLK 79 +#define AUD_CLKID_MST_B_SCLK 80 +#define AUD_CLKID_MST_C_SCLK 81 +#define AUD_CLKID_MST_D_SCLK 82 +#define AUD_CLKID_MST_E_SCLK 83 +#define AUD_CLKID_MST_F_SCLK 84 +#define AUD_CLKID_MST_A_LRCLK 86 +#define AUD_CLKID_MST_B_LRCLK 87 +#define AUD_CLKID_MST_C_LRCLK 88 +#define AUD_CLKID_MST_D_LRCLK 89 +#define AUD_CLKID_MST_E_LRCLK 90 +#define AUD_CLKID_MST_F_LRCLK 91 +#define AUD_CLKID_TDMIN_A_SCLK_SEL 116 +#define AUD_CLKID_TDMIN_B_SCLK_SEL 117 +#define AUD_CLKID_TDMIN_C_SCLK_SEL 118 +#define AUD_CLKID_TDMIN_LB_SCLK_SEL 119 +#define AUD_CLKID_TDMOUT_A_SCLK_SEL 120 +#define AUD_CLKID_TDMOUT_B_SCLK_SEL 121 +#define AUD_CLKID_TDMOUT_C_SCLK_SEL 122 +#define AUD_CLKID_TDMIN_A_SCLK 123 +#define AUD_CLKID_TDMIN_B_SCLK 124 +#define AUD_CLKID_TDMIN_C_SCLK 125 +#define AUD_CLKID_TDMIN_LB_SCLK 126 +#define AUD_CLKID_TDMOUT_A_SCLK 127 +#define AUD_CLKID_TDMOUT_B_SCLK 128 +#define AUD_CLKID_TDMOUT_C_SCLK 129 +#define AUD_CLKID_TDMIN_A_LRCLK 130 +#define AUD_CLKID_TDMIN_B_LRCLK 131 +#define AUD_CLKID_TDMIN_C_LRCLK 132 +#define AUD_CLKID_TDMIN_LB_LRCLK 133 +#define AUD_CLKID_TDMOUT_A_LRCLK 134 +#define AUD_CLKID_TDMOUT_B_LRCLK 135 +#define AUD_CLKID_TDMOUT_C_LRCLK 136 + +#endif /* __AXG_AUDIO_CLKC_BINDINGS_H */ diff --git a/include/dt-bindings/clock/axg-clkc.h b/include/dt-bindings/clock/axg-clkc.h index 555937a25504..fd1f938c38d1 100644 --- a/include/dt-bindings/clock/axg-clkc.h +++ b/include/dt-bindings/clock/axg-clkc.h @@ -68,5 +68,9 @@ #define CLKID_SD_EMMC_B_CLK0 59 #define CLKID_SD_EMMC_C_CLK0 60 #define CLKID_HIFI_PLL 69 +#define CLKID_PCIE_CML_EN0 79 +#define CLKID_PCIE_CML_EN1 80 +#define CLKID_MIPI_ENABLE 81 +#define CLKID_GEN_CLK 84 #endif /* __AXG_CLKC_H */ diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h index 7a892be90549..3979d48c025f 100644 --- a/include/dt-bindings/clock/gxbb-clkc.h +++ b/include/dt-bindings/clock/gxbb-clkc.h @@ -127,5 +127,6 @@ #define CLKID_VAPB 140 #define CLKID_VDEC_1 153 #define CLKID_VDEC_HEVC 156 +#define CLKID_GEN_CLK 159 #endif /* __GXBB_CLKC_H */ |