diff options
347 files changed, 2034 insertions, 4397 deletions
diff --git a/Documentation/ABI/obsolete/sysfs-gpio b/Documentation/ABI/obsolete/sysfs-gpio index 32513dc2eec9..40d41ea1a3f5 100644 --- a/Documentation/ABI/obsolete/sysfs-gpio +++ b/Documentation/ABI/obsolete/sysfs-gpio @@ -11,7 +11,7 @@ Description: Kernel code may export it for complete or partial access. GPIOs are identified as they are inside the kernel, using integers in - the range 0..INT_MAX. See Documentation/gpio/gpio.txt for more information. + the range 0..INT_MAX. See Documentation/gpio for more information. /sys/class/gpio /export ... asks the kernel to export a GPIO to userspace diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index bd4975e132d3..9c5e7732d249 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -238,9 +238,6 @@ Description: Discover and change clock speed of CPUs See files in Documentation/cpu-freq/ for more information. - In particular, read Documentation/cpu-freq/user-guide.txt - to learn how to control the knobs. - What: /sys/devices/system/cpu/cpu#/cpufreq/freqdomain_cpus Date: June 2013 diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 638342d0a095..efc7aa7a0670 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -256,7 +256,7 @@ (may crash computer or cause data corruption) ALSA [HW,ALSA] - See Documentation/sound/alsa/alsa-parameters.txt + See Documentation/sound/alsa-configuration.rst alignment= [KNL,ARM] Allow the default userspace alignment fault handler @@ -2926,9 +2926,6 @@ This will also cause panics on machine check exceptions. Useful together with panic=30 to trigger a reboot. - OSS [HW,OSS] - See Documentation/sound/oss/oss-parameters.txt - page_owner= [KNL] Boot-time page_owner enabling option. Storage of the information about who allocated each page is disabled in default. With this switch, @@ -4335,7 +4332,7 @@ [FTRACE] Set and start specified trace events in order to facilitate early boot debugging. The event-list is a comma separated list of trace events to enable. See - also Documentation/trace/events.txt + also Documentation/trace/events.rst trace_options=[option-list] [FTRACE] Enable or disable tracer options at boot. @@ -4350,7 +4347,7 @@ trace_options=stacktrace - See also Documentation/trace/ftrace.txt "trace options" + See also Documentation/trace/ftrace.rst "trace options" section. tp_printk[FTRACE] diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index 86927029a52d..207eca58efaa 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -752,18 +752,6 @@ completion of the request to the block layer. This means ending tag operations before calling end_that_request_last()! For an example of a user of these helpers, see the IDE tagged command queueing support. -Certain hardware conditions may dictate a need to invalidate the block tag -queue. For instance, on IDE any tagged request error needs to clear both -the hardware and software block queue and enable the driver to sanely restart -all the outstanding requests. There's a third helper to do that: - - blk_queue_invalidate_tags(struct request_queue *q) - - Clear the internal block tag queue and re-add all the pending requests - to the request queue. The driver will receive them again on the - next request_fn run, just like it did the first time it encountered - them. - 3.2.5.2 Tag info Some block functions exist to query current tag status or to go from a @@ -805,8 +793,7 @@ Internally, block manages tags in the blk_queue_tag structure: Most of the above is simple and straight forward, however busy_list may need a bit of explaining. Normally we don't care too much about request ordering, but in the event of any barrier requests in the tag queue we need to ensure -that requests are restarted in the order they were queue. This may happen -if the driver needs to use blk_queue_invalidate_tags(). +that requests are restarted in the order they were queue. 3.3 I/O Submission diff --git a/Documentation/core-api/kernel-api.rst b/Documentation/core-api/kernel-api.rst index 8e44aea366c2..76fe2d0f5e7d 100644 --- a/Documentation/core-api/kernel-api.rst +++ b/Documentation/core-api/kernel-api.rst @@ -284,7 +284,7 @@ Resources Management MTRR Handling ------------- -.. kernel-doc:: arch/x86/kernel/cpu/mtrr/main.c +.. kernel-doc:: arch/x86/kernel/cpu/mtrr/mtrr.c :export: Security Framework diff --git a/Documentation/crypto/crypto_engine.rst b/Documentation/crypto/crypto_engine.rst index 8272ac92a14f..1d56221dfe35 100644 --- a/Documentation/crypto/crypto_engine.rst +++ b/Documentation/crypto/crypto_engine.rst @@ -8,11 +8,13 @@ The crypto engine API (CE), is a crypto queue manager. Requirement ----------- -You have to put at start of your tfm_ctx the struct crypto_engine_ctx -struct your_tfm_ctx { +You have to put at start of your tfm_ctx the struct crypto_engine_ctx:: + + struct your_tfm_ctx { struct crypto_engine_ctx enginectx; ... -}; + }; + Why: Since CE manage only crypto_async_request, it cannot know the underlying request_type and so have access only on the TFM. So using container_of for accessing __ctx is impossible. diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt index 7364953d0d0b..45ac19bfa0a9 100644 --- a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt @@ -31,10 +31,10 @@ This binding uses the common clock binding[1]. Each subnode should use the binding described in [2]..[7] [1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[3] Documentation/devicetree/bindings/clock/st,clkgen-mux.txt -[4] Documentation/devicetree/bindings/clock/st,clkgen-pll.txt -[7] Documentation/devicetree/bindings/clock/st,quadfs.txt -[8] Documentation/devicetree/bindings/clock/st,flexgen.txt +[3] Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt +[4] Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt +[7] Documentation/devicetree/bindings/clock/st/st,quadfs.txt +[8] Documentation/devicetree/bindings/clock/st/st,flexgen.txt Required properties: diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt index 03f8fdee62a7..56d603c1f716 100644 --- a/Documentation/devicetree/bindings/clock/ti/gate.txt +++ b/Documentation/devicetree/bindings/clock/ti/gate.txt @@ -10,7 +10,7 @@ will be controlled instead and the corresponding hw-ops for that is used. [1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Documentation/devicetree/bindings/clock/gate-clock.txt +[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt [3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt Required properties: diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt index 3111a409fea6..3f4704040140 100644 --- a/Documentation/devicetree/bindings/clock/ti/interface.txt +++ b/Documentation/devicetree/bindings/clock/ti/interface.txt @@ -9,7 +9,7 @@ companion clock finding (match corresponding functional gate clock) and hardware autoidle enable / disable. [1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Documentation/devicetree/bindings/clock/gate-clock.txt +[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt Required properties: - compatible : shall be one of: diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt index d36f07e0a2bb..0551c78619de 100644 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt @@ -8,7 +8,7 @@ Required properties: "intermediate" - A parent of "cpu" clock which is used as "intermediate" clock source (usually MAINPLL) when the original CPU PLL is under transition and not stable yet. - Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for + Please refer to Documentation/devicetree/bindings/clock/clock-bindings.txt for generic clock consumer properties. - operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp.txt for detail. diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt index d6d2833482c9..fc2bcbe26b1e 100644 --- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt +++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt @@ -12,7 +12,7 @@ Required properties: - clocks: Phandles for clock specified in "clock-names" property - clock-names : The name of clock used by the DFI, must be "pclk_ddr_mon"; -- operating-points-v2: Refer to Documentation/devicetree/bindings/power/opp.txt +- operating-points-v2: Refer to Documentation/devicetree/bindings/opp/opp.txt for details. - center-supply: DMC supply node. - status: Marks the node enabled/disabled. diff --git a/Documentation/devicetree/bindings/display/bridge/tda998x.txt b/Documentation/devicetree/bindings/display/bridge/tda998x.txt index 1a4eaca40d94..f5a02f61dd36 100644 --- a/Documentation/devicetree/bindings/display/bridge/tda998x.txt +++ b/Documentation/devicetree/bindings/display/bridge/tda998x.txt @@ -30,7 +30,7 @@ Optional properties: - nxp,calib-gpios: calibration GPIO, which must correspond with the gpio used for the TDA998x interrupt pin. -[1] Documentation/sound/alsa/soc/DAI.txt +[1] Documentation/sound/soc/dai.rst [2] include/dt-bindings/display/tda998x.h Example: diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt index 039219df05c5..18a2cde2e5f3 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt @@ -34,7 +34,7 @@ Optional properties: - mali-supply : Phandle to regulator for the Mali device. Refer to Documentation/devicetree/bindings/regulator/regulator.txt for details. -- operating-points-v2 : Refer to Documentation/devicetree/bindings/power/opp.txt +- operating-points-v2 : Refer to Documentation/devicetree/bindings/opp/opp.txt for details. diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt index c1f65d1dac1d..63cd91176a68 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt @@ -44,7 +44,7 @@ Optional properties: - memory-region: Memory region to allocate from, as defined in - Documentation/devicetree/bindi/reserved-memory/reserved-memory.txt + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt - mali-supply: Phandle to regulator for the Mali device, as defined in diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt index f2c30c8b725d..9afffbdf6e28 100644 --- a/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt +++ b/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt @@ -12,7 +12,7 @@ Additional documentation for F11 can be found at: http://www.synaptics.com/sites/default/files/511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf Optional Touch Properties: -Description in Documentation/devicetree/bindings/input/touch +Description in Documentation/devicetree/bindings/input/touchscreen - touchscreen-inverted-x - touchscreen-inverted-y - touchscreen-swapped-x-y diff --git a/Documentation/devicetree/bindings/input/rotary-encoder.txt b/Documentation/devicetree/bindings/input/rotary-encoder.txt index f99fe5cdeaec..a644408b33b8 100644 --- a/Documentation/devicetree/bindings/input/rotary-encoder.txt +++ b/Documentation/devicetree/bindings/input/rotary-encoder.txt @@ -28,7 +28,7 @@ Deprecated properties: This property is deprecated. Instead, a 'steps-per-period ' value should be used, such as "rotary-encoder,steps-per-period = <2>". -See Documentation/input/rotary-encoder.txt for more information. +See Documentation/input/devices/rotary-encoder.rst for more information. Example: diff --git a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt index c7888d6f6408..880d4d70c9fd 100644 --- a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt +++ b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt @@ -28,7 +28,7 @@ See: Documentation/devicetree/bindings/clock/clock-bindings.txt - pinctrl-names : a pinctrl state named tsin%d-serial or tsin%d-parallel (where %d is tsin-num) must be defined for each tsin child node. - pinctrl-0 : phandle referencing pin configuration for this tsin configuration -See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt +See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt Required properties (tsin (child) node): diff --git a/Documentation/devicetree/bindings/mfd/as3722.txt b/Documentation/devicetree/bindings/mfd/as3722.txt index 0b2a6099aa20..5297b2210704 100644 --- a/Documentation/devicetree/bindings/mfd/as3722.txt +++ b/Documentation/devicetree/bindings/mfd/as3722.txt @@ -46,7 +46,7 @@ is required: Following properties are require if pin control setting is required at boot. - pinctrl-names: A pinctrl state named "default" be defined, using the - bindings in pinctrl/pinctrl-binding.txt. + bindings in pinctrl/pinctrl-bindings.txt. - pinctrl[0...n]: Properties to contain the phandle that refer to different nodes of pin control settings. These nodes represents the pin control setting of state 0 to state n. Each of these diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt index d1df77f4d655..0ebd08af777d 100644 --- a/Documentation/devicetree/bindings/mfd/mt6397.txt +++ b/Documentation/devicetree/bindings/mfd/mt6397.txt @@ -12,7 +12,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules: It is interfaced to host controller using SPI interface by a proprietary hardware called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap. See the following for pwarp node definitions: -Documentation/devicetree/bindings/soc/pwrap.txt +Documentation/devicetree/bindings/soc/mediatek/pwrap.txt This document describes the binding for MFD device and its sub module. diff --git a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt index dd2c06540485..daa091c2e67b 100644 --- a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt +++ b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt @@ -8,8 +8,8 @@ Required properties: - reg: The PRCM registers range The prcm node may contain several subdevices definitions: - - see Documentation/devicetree/clk/sunxi.txt for clock devices - - see Documentation/devicetree/reset/allwinner,sunxi-clock-reset.txt for reset + - see Documentation/devicetree/bindings/clock/sunxi.txt for clock devices + - see Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt for reset controller devices diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt index a58c173b7ab9..0419a63f73a0 100644 --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt @@ -62,7 +62,7 @@ Required properties for a slot (Deprecated - Recommend to use one slot per host) rest of the gpios (depending on the bus-width property) are the data lines in no particular order. The format of the gpio specifier depends on the gpio controller. -(Deprecated - Refer to Documentation/devicetree/binding/pinctrl/samsung-pinctrl.txt) +(Deprecated - Refer to Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt) Example: diff --git a/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt b/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt index 3149297b3933..f064528effed 100644 --- a/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt +++ b/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt @@ -12,7 +12,7 @@ Required properties: See: Documentation/devicetree/bindings/clock/clock-bindings.txt - pinctrl-names: A pinctrl state names "default" must be defined. - pinctrl-0: Phandle referencing pin configuration of the SDHCI controller. - See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt + See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt Example: diff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt index 6b3d40ca395e..ccf82b4ee838 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-st.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-st.txt @@ -20,7 +20,7 @@ Required properties: - pinctrl-names: A pinctrl state names "default" must be defined. - pinctrl-0: Phandle referencing pin configuration of the sd/emmc controller. - See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt + See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - reg: This must provide the host controller base address and it can also contain the FlashSS Top register for TX/RX delay used by the driver diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt index fd23904ac68e..a700943218ca 100644 --- a/Documentation/devicetree/bindings/net/dsa/ksz.txt +++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt @@ -6,7 +6,7 @@ Required properties: - compatible: For external switch chips, compatible string must be exactly one of: "microchip,ksz9477" -See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional +See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional required and optional properties. Examples: diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt index a9bc27b93ee3..aa3527f71fdc 100644 --- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt +++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt @@ -31,7 +31,7 @@ Required properties for the child nodes within ports container: - phy-mode: String, must be either "trgmii" or "rgmii" for port labeled "cpu". -See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional +See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional required, optional properties and how the integrated switch subnodes must be specified. diff --git a/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt b/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt index d5e22fc67d66..0df79d9e07ec 100644 --- a/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt +++ b/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt @@ -18,7 +18,7 @@ Optional properties: Data cells: Data cells are child nodes of eerpom node, bindings for which are -documented in Documentation/bindings/nvmem/nvmem.txt +documented in Documentation/devicetree/bindings/nvmem/nvmem.txt Example: diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt index 7bf9df047a1e..0dcb87d6554f 100644 --- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt @@ -3,7 +3,7 @@ HiSilicon Hip05 and Hip06 PCIe host bridge DT description HiSilicon PCIe host controller is based on the Synopsys DesignWare PCI core. It shares common functions with the PCIe DesignWare core driver and inherits common properties defined in -Documentation/devicetree/bindings/pci/designware-pci.txt. +Documentation/devicetree/bindings/pci/designware-pcie.txt. Additional properties are described here: diff --git a/Documentation/devicetree/bindings/pci/kirin-pcie.txt b/Documentation/devicetree/bindings/pci/kirin-pcie.txt index 6e217c63123d..6bbe43818ad5 100644 --- a/Documentation/devicetree/bindings/pci/kirin-pcie.txt +++ b/Documentation/devicetree/bindings/pci/kirin-pcie.txt @@ -3,7 +3,7 @@ HiSilicon Kirin SoCs PCIe host DT description Kirin PCIe host controller is based on the Synopsys DesignWare PCI core. It shares common functions with the PCIe DesignWare core driver and inherits common properties defined in -Documentation/devicetree/bindings/pci/designware-pci.txt. +Documentation/devicetree/bindings/pci/designware-pcie.txt. Additional properties are described here: diff --git a/Documentation/devicetree/bindings/pci/pci-keystone.txt b/Documentation/devicetree/bindings/pci/pci-keystone.txt index 7e05487544ed..3d4a209b0fd0 100644 --- a/Documentation/devicetree/bindings/pci/pci-keystone.txt +++ b/Documentation/devicetree/bindings/pci/pci-keystone.txt @@ -3,9 +3,9 @@ TI Keystone PCIe interface Keystone PCI host Controller is based on the Synopsys DesignWare PCI hardware version 3.65. It shares common functions with the PCIe DesignWare core driver and inherits common properties defined in -Documentation/devicetree/bindings/pci/designware-pci.txt +Documentation/devicetree/bindings/pci/designware-pcie.txt -Please refer to Documentation/devicetree/bindings/pci/designware-pci.txt +Please refer to Documentation/devicetree/bindings/pci/designware-pcie.txt for the details of DesignWare DT bindings. Additional properties are described here as well as properties that are not applicable. diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt index ad4fce3552bb..511fc234558b 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt @@ -11,9 +11,9 @@ Optional Pinmux properties: -------------------------- Following properties are required if default setting of pins are required at boot. -- pinctrl-names: A pinctrl state named per <pinctrl-binding.txt>. +- pinctrl-names: A pinctrl state named per <pinctrl-bindings.txt>. - pinctrl[0...n]: Properties to contain the phandle for pinctrl states per - <pinctrl-binding.txt>. + <pinctrl-bindings.txt>. The pin configurations are defined as child of the pinctrl states node. Each sub-node have following properties: diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt index a677145ae6d1..625a22e2f211 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt @@ -101,9 +101,9 @@ Optional Pinmux properties: -------------------------- Following properties are required if default setting of pins are required at boot. -- pinctrl-names: A pinctrl state named per <pinctrl-binding.txt>. +- pinctrl-names: A pinctrl state named per <pinctrl-bindings.txt>. - pinctrl[0...n]: Properties to contain the phandle for pinctrl states per - <pinctrl-binding.txt>. + <pinctrl-bindings.txt>. The pin configurations are defined as child of the pinctrl states node. Each sub-node have following properties: diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt index eee3dc260934..cbcbd31e3ce8 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt @@ -10,9 +10,9 @@ Optional Pinmux properties: -------------------------- Following properties are required if default setting of pins are required at boot. -- pinctrl-names: A pinctrl state named per <pinctrl-binding.txt>. +- pinctrl-names: A pinctrl state named per <pinctrl-bindings.txt>. - pinctrl[0...n]: Properties to contain the phandle for pinctrl states per - <pinctrl-binding.txt>. + <pinctrl-bindings.txt>. The pin configurations are defined as child of the pinctrl states node. Each sub-node have following properties: diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt index b31d6bbeee16..726ec2875223 100644 --- a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt @@ -14,7 +14,7 @@ Required properties: datasheet - interrupts: Should contain one interrupt specifier for the GPC interrupt - clocks: Must contain an entry for each entry in clock-names. - See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details. + See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. - clock-names: Must include the following entries: - ipg diff --git a/Documentation/devicetree/bindings/power/supply/ab8500/btemp.txt b/Documentation/devicetree/bindings/power/supply/ab8500/btemp.txt index 0ba1bcc7f33a..f181e46d8e07 100644 --- a/Documentation/devicetree/bindings/power/supply/ab8500/btemp.txt +++ b/Documentation/devicetree/bindings/power/supply/ab8500/btemp.txt @@ -13,4 +13,4 @@ Required Properties: }; For information on battery specific node, Ref: -Documentation/devicetree/bindings/power_supply/ab8500/fg.txt +Documentation/devicetree/bindings/power/supply/ab8500/fg.txt diff --git a/Documentation/devicetree/bindings/power/supply/ab8500/chargalg.txt b/Documentation/devicetree/bindings/power/supply/ab8500/chargalg.txt index ef5328371122..56636f927203 100644 --- a/Documentation/devicetree/bindings/power/supply/ab8500/chargalg.txt +++ b/Documentation/devicetree/bindings/power/supply/ab8500/chargalg.txt @@ -13,4 +13,4 @@ ab8500_chargalg { }; For information on battery specific node, Ref: -Documentation/devicetree/bindings/power_supply/ab8500/fg.txt +Documentation/devicetree/bindings/power/supply/ab8500/fg.txt diff --git a/Documentation/devicetree/bindings/power/supply/ab8500/charger.txt b/Documentation/devicetree/bindings/power/supply/ab8500/charger.txt index 6bdbb08ea9e0..24ada03e07b4 100644 --- a/Documentation/devicetree/bindings/power/supply/ab8500/charger.txt +++ b/Documentation/devicetree/bindings/power/supply/ab8500/charger.txt @@ -22,4 +22,4 @@ Required Properties: }; For information on battery specific node, Ref: -Documentation/devicetree/bindings/power_supply/ab8500/fg.txt +Documentation/devicetree/bindings/power/supply/ab8500/fg.txt diff --git a/Documentation/devicetree/bindings/power/wakeup-source.txt b/Documentation/devicetree/bindings/power/wakeup-source.txt index 5d254ab13ebf..cfd74659fbed 100644 --- a/Documentation/devicetree/bindings/power/wakeup-source.txt +++ b/Documentation/devicetree/bindings/power/wakeup-source.txt @@ -22,7 +22,7 @@ List of legacy properties and respective binding document 3. "has-tpo" Documentation/devicetree/bindings/rtc/rtc-opal.txt 4. "linux,wakeup" Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt Documentation/devicetree/bindings/mfd/tc3589x.txt - Documentation/devicetree/bindings/input/ads7846.txt + Documentation/devicetree/bindings/input/touchscreen/ads7846.txt 5. "linux,keypad-wakeup" Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt 6. "linux,input-wakeup" Documentation/devicetree/bindings/input/samsung-keypad.txt 7. "nvidia,wakeup-source" Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt diff --git a/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt b/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt index 7a34345d0ca3..c8dd440e9747 100644 --- a/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt +++ b/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt @@ -8,7 +8,7 @@ Required properties: See: Documentation/devicetree/bindings/clock/clock-bindings.txt - pinctrl-names: A pinctrl state names "default" must be defined. - pinctrl-0: Phandle referencing pin configuration of the UART peripheral. - See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt + See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt Optional properties: - cts-gpios: CTS pin for UART diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt b/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt index 4bda52042402..58c341300552 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt +++ b/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt @@ -18,7 +18,7 @@ Required properties: See Documentation/devicetree/bindings/dma/stm32-dma.txt. - dma-names: Identifier for each DMA request line. Must be "tx" and "rx". - pinctrl-names: should contain only value "default" - - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/pinctrl-stm32.txt + - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt Optional properties: - resets: Reference to a reset controller asserting the reset controller diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt index f301cdf0b7e6..3a3fc506e43a 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt @@ -37,7 +37,7 @@ SAI subnodes required properties: "tx": if sai sub-block is configured as playback DAI "rx": if sai sub-block is configured as capture DAI - pinctrl-names: should contain only value "default" - - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/pinctrl-stm32.txt + - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt SAI subnodes Optional properties: - st,sync: specify synchronization mode. diff --git a/Documentation/devicetree/bindings/spi/spi-st-ssc.txt b/Documentation/devicetree/bindings/spi/spi-st-ssc.txt index fe54959ec957..1bdc4709e474 100644 --- a/Documentation/devicetree/bindings/spi/spi-st-ssc.txt +++ b/Documentation/devicetree/bindings/spi/spi-st-ssc.txt @@ -9,7 +9,7 @@ Required properties: - clocks : Must contain an entry for each name in clock-names See ../clk/* - pinctrl-names : Uses "default", can use "sleep" if provided - See ../pinctrl/pinctrl-binding.txt + See ../pinctrl/pinctrl-bindings.txt Optional properties: - cs-gpios : List of GPIO chip selects diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt index 50a31536e975..252a05c5d976 100644 --- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt +++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt @@ -16,7 +16,7 @@ A child node must exist to represent the core DWC3 IP block. The name of the node is not important. The content of the node is defined in dwc3.txt. Phy documentation is provided in the following places: -Documentation/devicetree/bindings/phy/rockchip,dwc3-usb-phy.txt +Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt Example device nodes: diff --git a/Documentation/driver-api/gpio/consumer.rst b/Documentation/driver-api/gpio/consumer.rst index c71a50d85b50..aa03f389d41d 100644 --- a/Documentation/driver-api/gpio/consumer.rst +++ b/Documentation/driver-api/gpio/consumer.rst @@ -57,7 +57,7 @@ device that displays digits), an additional index argument can be specified:: enum gpiod_flags flags) For a more detailed description of the con_id parameter in the DeviceTree case -see Documentation/gpio/board.txt +see Documentation/driver-api/gpio/board.rst The flags parameter is used to optionally specify a direction and initial value for the GPIO. Values can be: diff --git a/Documentation/driver-api/infrastructure.rst b/Documentation/driver-api/infrastructure.rst index bee1b9a1702f..6172f3cc3d0b 100644 --- a/Documentation/driver-api/infrastructure.rst +++ b/Documentation/driver-api/infrastructure.rst @@ -49,10 +49,10 @@ Device Drivers Base Device Drivers DMA Management ----------------------------- -.. kernel-doc:: drivers/base/dma-coherent.c +.. kernel-doc:: kernel/dma/coherent.c :export: -.. kernel-doc:: drivers/base/dma-mapping.c +.. kernel-doc:: kernel/dma/mapping.c :export: Device drivers PnP support diff --git a/Documentation/filesystems/cifs/AUTHORS b/Documentation/filesystems/cifs/AUTHORS index 9f4f87e16240..75865da2ce14 100644 --- a/Documentation/filesystems/cifs/AUTHORS +++ b/Documentation/filesystems/cifs/AUTHORS @@ -42,9 +42,11 @@ Jeff Layton (many, many fixes, as well as great work on the cifs Kerberos code) Scott Lovenberg Pavel Shilovsky (for great work adding SMB2 support, and various SMB3 features) Aurelien Aptel (for DFS SMB3 work and some key bug fixes) -Ronnie Sahlberg (for SMB3 xattr work and bug fixes) +Ronnie Sahlberg (for SMB3 xattr work, bug fixes, and lots of great work on compounding) Shirish Pargaonkar (for many ACL patches over the years) Sachin Prabhu (many bug fixes, including for reconnect, copy offload and security) +Paulo Alcantara +Long Li (some great work on RDMA, SMB Direct) Test case and Bug Report contributors @@ -58,5 +60,4 @@ mention to the Stanford Checker (SWAT) which pointed out many minor bugs in error paths. Valuable suggestions also have come from Al Viro and Dave Miller. -And thanks to the IBM LTC and Power test teams and SuSE testers for -finding multiple bugs during excellent stress test runs. +And thanks to the IBM LTC and Power test teams and SuSE and Citrix and RedHat testers for finding multiple bugs during excellent stress test runs. diff --git a/Documentation/filesystems/cifs/CHANGES b/Documentation/filesystems/cifs/CHANGES index bc0025cdd1c9..455e1cc494a9 100644 --- a/Documentation/filesystems/cifs/CHANGES +++ b/Documentation/filesystems/cifs/CHANGES @@ -1,3 +1,6 @@ +See https://wiki.samba.org/index.php/LinuxCIFSKernel for +more current information. + Version 1.62 ------------ Add sockopt=TCP_NODELAY mount option. EA (xattr) routines hardened diff --git a/Documentation/filesystems/cifs/TODO b/Documentation/filesystems/cifs/TODO index c5adf149b57f..852499aed64b 100644 --- a/Documentation/filesystems/cifs/TODO +++ b/Documentation/filesystems/cifs/TODO @@ -9,14 +9,14 @@ is a partial list of the known problems and missing features: a) SMB3 (and SMB3.02) missing optional features: - multichannel (started), integration with RDMA - - directory leases (improved metadata caching) - - T10 copy offload (copy chunk, and "Duplicate Extents" ioctl + - directory leases (improved metadata caching), started (root dir only) + - T10 copy offload ie "ODX" (copy chunk, and "Duplicate Extents" ioctl currently the only two server side copy mechanisms supported) b) improved sparse file support c) Directory entry caching relies on a 1 second timer, rather than -using Directory Leases +using Directory Leases, currently only the root file handle is cached longer d) quota support (needs minor kernel change since quota calls to make it to network filesystems or deviceless filesystems) @@ -42,6 +42,8 @@ mount or a per server basis to client UIDs or nobody if no mapping exists. Also better integration with winbind for resolving SID owners k) Add tools to take advantage of more smb3 specific ioctls and features +(passthrough ioctl/fsctl for sending various SMB3 fsctls to the server +is in progress) l) encrypted file support @@ -71,9 +73,8 @@ t) split cifs and smb3 support into separate modules so legacy (and less secure) CIFS dialect can be disabled in environments that don't need it and simplify the code. -u) Finish up SMB3.1.1 dialect support - -v) POSIX Extensions for SMB3.1.1 +v) POSIX Extensions for SMB3.1.1 (started, create and mkdir support added +so far). KNOWN BUGS ==================================== @@ -92,8 +93,8 @@ Misc testing to do 1) check out max path names and max path name components against various server types. Try nested symlinks (8 deep). Return max path name in stat -f information -2) Improve xfstest's cifs enablement and adapt xfstests where needed to test -cifs better +2) Improve xfstest's cifs/smb3 enablement and adapt xfstests where needed to test +cifs/smb3 better 3) Additional performance testing and optimization using iozone and similar - there are some easy changes that can be done to parallelize sequential writes, diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx index cfd31d94c872..72d16f08e431 100644 --- a/Documentation/hwmon/ina2xx +++ b/Documentation/hwmon/ina2xx @@ -53,7 +53,7 @@ bus supply voltage. The shunt value in micro-ohms can be set via platform data or device tree at compile-time or via the shunt_resistor attribute in sysfs at run-time. Please -refer to the Documentation/devicetree/bindings/i2c/ina2xx.txt for bindings +refer to the Documentation/devicetree/bindings/hwmon/ina2xx.txt for bindings if the device tree is used. Additionally ina226 supports update_interval attribute as described in diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt index 22208bf2386d..cb3b0de83fc6 100644 --- a/Documentation/kprobes.txt +++ b/Documentation/kprobes.txt @@ -724,8 +724,8 @@ migrate your tool to one of the following options: See following documents: - - Documentation/trace/kprobetrace.txt - - Documentation/trace/events.txt + - Documentation/trace/kprobetrace.rst + - Documentation/trace/events.rst - tools/perf/Documentation/perf-probe.txt diff --git a/Documentation/maintainer/pull-requests.rst b/Documentation/maintainer/pull-requests.rst index a19db3458b56..22b271de0304 100644 --- a/Documentation/maintainer/pull-requests.rst +++ b/Documentation/maintainer/pull-requests.rst @@ -41,7 +41,7 @@ named ``char-misc-next``, you would be using the following command:: that will create a signed tag called ``char-misc-4.15-rc1`` based on the last commit in the ``char-misc-next`` branch, and sign it with your gpg key -(see :ref:`Documentation/maintainer/configure_git.rst <configuregit>`). +(see :ref:`Documentation/maintainer/configure-git.rst <configuregit>`). Linus will only accept pull requests based on a signed tag. Other maintainers may differ. diff --git a/Documentation/networking/can.rst b/Documentation/networking/can.rst index d23c51abf8c6..2fd0b51a8c52 100644 --- a/Documentation/networking/can.rst +++ b/Documentation/networking/can.rst @@ -164,7 +164,7 @@ The Linux network devices (by default) just can handle the transmission and reception of media dependent frames. Due to the arbitration on the CAN bus the transmission of a low prio CAN-ID may be delayed by the reception of a high prio CAN frame. To -reflect the correct [*]_ traffic on the node the loopback of the sent +reflect the correct [#f1]_ traffic on the node the loopback of the sent data has to be performed right after a successful transmission. If the CAN network interface is not capable of performing the loopback for some reason the SocketCAN core can do this task as a fallback solution. @@ -175,7 +175,7 @@ networking behaviour for CAN applications. Due to some requests from the RT-SocketCAN group the loopback optionally may be disabled for each separate socket. See sockopts from the CAN RAW sockets in :ref:`socketcan-raw-sockets`. -.. [*] you really like to have this when you're running analyser +.. [#f1] you really like to have this when you're running analyser tools like 'candump' or 'cansniffer' on the (same) node. diff --git a/Documentation/sphinx/rstFlatTable.py b/Documentation/sphinx/rstFlatTable.py index 25feb0d35e7a..2019a55f6b18 100755 --- a/Documentation/sphinx/rstFlatTable.py +++ b/Documentation/sphinx/rstFlatTable.py @@ -53,8 +53,6 @@ from docutils.utils import SystemMessagePropagation # common globals # ============================================================================== -# The version numbering follows numbering of the specification -# (Documentation/books/kernel-doc-HOWTO). __version__ = '1.0' PY3 = sys.version_info[0] == 3 diff --git a/Documentation/trace/coresight.txt b/Documentation/trace/coresight.txt index 1d74ad0202b6..efbc832146e7 100644 --- a/Documentation/trace/coresight.txt +++ b/Documentation/trace/coresight.txt @@ -426,5 +426,5 @@ root@genericarmv8:~# Details on how to use the generic STM API can be found here [2]. [1]. Documentation/ABI/testing/sysfs-bus-coresight-devices-stm -[2]. Documentation/trace/stm.txt +[2]. Documentation/trace/stm.rst [3]. https://github.com/Linaro/perf-opencsd diff --git a/Documentation/trace/events.rst b/Documentation/trace/events.rst index 1afae55dc55c..696dc69b8158 100644 --- a/Documentation/trace/events.rst +++ b/Documentation/trace/events.rst @@ -8,7 +8,7 @@ Event Tracing 1. Introduction =============== -Tracepoints (see Documentation/trace/tracepoints.txt) can be used +Tracepoints (see Documentation/trace/tracepoints.rst) can be used without creating custom kernel modules to register probe functions using the event tracing infrastructure. diff --git a/Documentation/trace/ftrace-uses.rst b/Documentation/trace/ftrace-uses.rst index 00283b6dd101..1fbc69894eed 100644 --- a/Documentation/trace/ftrace-uses.rst +++ b/Documentation/trace/ftrace-uses.rst @@ -199,7 +199,7 @@ If @buf is NULL and reset is set, all functions will be enabled for tracing. The @buf can also be a glob expression to enable all functions that match a specific pattern. -See Filter Commands in :file:`Documentation/trace/ftrace.txt`. +See Filter Commands in :file:`Documentation/trace/ftrace.rst`. To just trace the schedule function: diff --git a/Documentation/trace/histogram.txt b/Documentation/trace/histogram.txt index b13771cb12c1..e73bcf9cb5f3 100644 --- a/Documentation/trace/histogram.txt +++ b/Documentation/trace/histogram.txt @@ -7,7 +7,7 @@ Histogram triggers are special event triggers that can be used to aggregate trace event data into histograms. For information on - trace events and event triggers, see Documentation/trace/events.txt. + trace events and event triggers, see Documentation/trace/events.rst. 2. Histogram Trigger Command diff --git a/Documentation/trace/intel_th.rst b/Documentation/trace/intel_th.rst index 990f13265178..19e2d633f3c7 100644 --- a/Documentation/trace/intel_th.rst +++ b/Documentation/trace/intel_th.rst @@ -38,7 +38,7 @@ description is at Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth. STH registers an stm class device, through which it provides interface to userspace and kernelspace software trace sources. See -Documentation/trace/stm.txt for more information on that. +Documentation/trace/stm.rst for more information on that. MSU can be configured to collect trace data into a system memory buffer, which can later on be read from its device nodes via read() or diff --git a/Documentation/trace/tracepoint-analysis.rst b/Documentation/trace/tracepoint-analysis.rst index a4d3ff2e5efb..716326b9f152 100644 --- a/Documentation/trace/tracepoint-analysis.rst +++ b/Documentation/trace/tracepoint-analysis.rst @@ -6,7 +6,7 @@ Notes on Analysing Behaviour Using Events and Tracepoints 1. Introduction =============== -Tracepoints (see Documentation/trace/tracepoints.txt) can be used without +Tracepoints (see Documentation/trace/tracepoints.rst) can be used without creating custom kernel modules to register probe functions using the event tracing infrastructure. @@ -55,7 +55,7 @@ simple case of:: 3.1 System-Wide Event Enabling ------------------------------ -See Documentation/trace/events.txt for a proper description on how events +See Documentation/trace/events.rst for a proper description on how events can be enabled system-wide. A short example of enabling all events related to page allocation would look something like:: @@ -112,7 +112,7 @@ at that point. 3.4 Local Event Enabling ------------------------ -Documentation/trace/ftrace.txt describes how to enable events on a per-thread +Documentation/trace/ftrace.rst describes how to enable events on a per-thread basis using set_ftrace_pid. 3.5 Local Event Enablement with PCL @@ -137,7 +137,7 @@ basis using PCL such as follows. 4. Event Filtering ================== -Documentation/trace/ftrace.txt covers in-depth how to filter events in +Documentation/trace/ftrace.rst covers in-depth how to filter events in ftrace. Obviously using grep and awk of trace_pipe is an option as well as any script reading trace_pipe. diff --git a/Documentation/translations/ja_JP/howto.rst b/Documentation/translations/ja_JP/howto.rst index 8d7ed0cbbf5f..f3116381c26b 100644 --- a/Documentation/translations/ja_JP/howto.rst +++ b/Documentation/translations/ja_JP/howto.rst @@ -1,5 +1,5 @@ NOTE: -This is a version of Documentation/HOWTO translated into Japanese. +This is a version of Documentation/process/howto.rst translated into Japanese. This document is maintained by Tsugikazu Shibata <tshibata@ab.jp.nec.com> If you find any difference between this document and the original file or a problem with the translation, please contact the maintainer of this file. @@ -109,7 +109,7 @@ linux-api@vger.kernel.org に送ることを勧めます。 ています。 カーネルに関して初めての人はここからスタートすると良い でしょう。 - :ref:`Documentation/Process/changes.rst <changes>` + :ref:`Documentation/process/changes.rst <changes>` このファイルはカーネルをうまく生成(訳注 build )し、走らせるのに最 小限のレベルで必要な数々のソフトウェアパッケージの一覧を示してい ます。 diff --git a/Documentation/translations/ko_KR/howto.rst b/Documentation/translations/ko_KR/howto.rst index 624654bdcd8a..a8197e072599 100644 --- a/Documentation/translations/ko_KR/howto.rst +++ b/Documentation/translations/ko_KR/howto.rst @@ -160,7 +160,7 @@ mtk.manpages@gmail.com의 메인테이너에게 보낼 것을 권장한다. 독특한 행동에 관하여 흔히 있는 오해들과 혼란들을 해소하고 있기 때문이다. - :ref:`Documentation/process/stable_kernel_rules.rst <stable_kernel_rules>` + :ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>` 이 문서는 안정적인 커널 배포가 이루어지는 규칙을 설명하고 있으며 여러분들이 이러한 배포들 중 하나에 변경을 하길 원한다면 무엇을 해야 하는지를 설명한다. diff --git a/Documentation/translations/zh_CN/SubmittingDrivers b/Documentation/translations/zh_CN/SubmittingDrivers index 929385e4b194..15e73562f710 100644 --- a/Documentation/translations/zh_CN/SubmittingDrivers +++ b/Documentation/translations/zh_CN/SubmittingDrivers @@ -107,7 +107,7 @@ Linux 2.6: 程序测试的指导，请参阅 Documentation/power/drivers-testing.txt。有关驱动程序电 源管理问题相对全面的概述，请参阅 - Documentation/power/admin-guide/devices.rst。 + Documentation/driver-api/pm/devices.rst。 管理： 如果一个驱动程序的作者还在进行有效的维护，那么通常除了那 些明显正确且不需要任何检查的补丁以外，其他所有的补丁都会 diff --git a/Documentation/translations/zh_CN/gpio.txt b/Documentation/translations/zh_CN/gpio.txt index 4f8bf30a41dc..4cb1ba8b8fed 100644 --- a/Documentation/translations/zh_CN/gpio.txt +++ b/Documentation/translations/zh_CN/gpio.txt @@ -1,4 +1,4 @@ -Chinese translated version of Documentation/gpio.txt +Chinese translated version of Documentation/gpio If you have any comment or update to the content, please contact the original document maintainer directly. However, if you have a problem @@ -10,7 +10,7 @@ Maintainer: Grant Likely <grant.likely@secretlab.ca> Linus Walleij <linus.walleij@linaro.org> Chinese maintainer: Fu Wei <tekkamanninja@gmail.com> --------------------------------------------------------------------- -Documentation/gpio.txt 的中文翻译 +Documentation/gpio 的中文翻译 如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文 交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻 diff --git a/Documentation/translations/zh_CN/io_ordering.txt b/Documentation/translations/zh_CN/io_ordering.txt index e592daf4e014..1f8127bdd415 100644 --- a/Documentation/translations/zh_CN/io_ordering.txt +++ b/Documentation/translations/zh_CN/io_ordering.txt @@ -1,4 +1,4 @@ -Chinese translated version of Documentation/io_orderings.txt +Chinese translated version of Documentation/io_ordering.txt If you have any comment or update to the content, please contact the original document maintainer directly. However, if you have a problem diff --git a/Documentation/translations/zh_CN/magic-number.txt b/Documentation/translations/zh_CN/magic-number.txt index e9db693c0a23..7159cec04090 100644 --- a/Documentation/translations/zh_CN/magic-number.txt +++ b/Documentation/translations/zh_CN/magic-number.txt @@ -1,4 +1,4 @@ -Chinese translated version of Documentation/magic-number.txt +Chinese translated version of Documentation/process/magic-number.rst If you have any comment or update to the content, please post to LKML directly. However, if you have problem communicating in English you can also ask the @@ -7,7 +7,7 @@ translation is outdated or there is problem with translation. Chinese maintainer: Jia Wei Wei <harryxiyou@gmail.com> --------------------------------------------------------------------- -Documentation/magic-number.txt的中文翻译 +Documentation/process/magic-number.rst的中文翻译 如果想评论或更新本文的内容，请直接发信到LKML。如果你使用英文交流有困难的话，也可 以向中文版维护者求助。如果本翻译更新不及时或者翻译存在问题，请联系中文版维护者。 diff --git a/Documentation/translations/zh_CN/video4linux/omap3isp.txt b/Documentation/translations/zh_CN/video4linux/omap3isp.txt index 67ffbf352ae0..e9f29375aa95 100644 --- a/Documentation/translations/zh_CN/video4linux/omap3isp.txt +++ b/Documentation/translations/zh_CN/video4linux/omap3isp.txt @@ -1,4 +1,4 @@ -Chinese translated version of Documentation/video4linux/omap3isp.txt +Chinese translated version of Documentation/media/v4l-drivers/omap3isp.rst If you have any comment or update to the content, please contact the original document maintainer directly. However, if you have a problem @@ -11,7 +11,7 @@ Maintainer: Laurent Pinchart <laurent.pinchart@ideasonboard.com> David Cohen <dacohen@gmail.com> Chinese maintainer: Fu Wei <tekkamanninja@gmail.com> --------------------------------------------------------------------- -Documentation/video4linux/omap3isp.txt 的中文翻译 +Documentation/media/v4l-drivers/omap3isp.rst 的中文翻译 如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文 交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻 diff --git a/Documentation/translations/zh_CN/video4linux/v4l2-framework.txt b/Documentation/translations/zh_CN/video4linux/v4l2-framework.txt index c77c0f060864..66c7c568bd86 100644 --- a/Documentation/translations/zh_CN/video4linux/v4l2-framework.txt +++ b/Documentation/translations/zh_CN/video4linux/v4l2-framework.txt @@ -1,4 +1,4 @@ -Chinese translated version of Documentation/video4linux/v4l2-framework.txt +Chinese translated version of Documentation/media/media_kapi.rst If you have any comment or update to the content, please contact the original document maintainer directly. However, if you have a problem @@ -9,7 +9,7 @@ or if there is a problem with the translation. Maintainer: Mauro Carvalho Chehab <mchehab@kernel.org> Chinese maintainer: Fu Wei <tekkamanninja@gmail.com> --------------------------------------------------------------------- -Documentation/video4linux/v4l2-framework.txt 的中文翻译 +Documentation/media/media_kapi.rst 的中文翻译 如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文 交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻 @@ -777,7 +777,7 @@ v4l2 核心 API 提供了一个处理视频缓冲的标准方法(称为“videob 线性 DMA(videobuf-dma-contig)以及大多用于 USB 设备的用 vmalloc 分配的缓冲(videobuf-vmalloc)。 -请参阅 Documentation/video4linux/videobuf，以获得更多关于 videobuf +请参阅 Documentation/media/kapi/v4l2-videobuf.rst，以获得更多关于 videobuf 层的使用信息。 v4l2_fh 结构体 diff --git a/MAINTAINERS b/MAINTAINERS index ebb3168fd9e0..edf3cf5ea691 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1732,7 +1732,8 @@ F: arch/arm/mach-npcm/ F: arch/arm/boot/dts/nuvoton-npcm* F: include/dt-bindings/clock/nuvoton,npcm7xx-clks.h F: drivers/*/*npcm* -F: Documentation/*/*npcm* +F: Documentation/devicetree/bindings/*/*npcm* +F: Documentation/devicetree/bindings/*/*/*npcm* ARM/NUVOTON W90X900 ARM ARCHITECTURE M: Wan ZongShun <mcuos.com@gmail.com> @@ -3079,7 +3080,7 @@ M: Clemens Ladisch <clemens@ladisch.de> L: alsa-devel@alsa-project.org (moderated for non-subscribers) T: git git://git.alsa-project.org/alsa-kernel.git S: Maintained -F: Documentation/sound/alsa/Bt87x.txt +F: Documentation/sound/cards/bt87x.rst F: sound/pci/bt87x.c BT8XXGPIO DRIVER @@ -3375,7 +3376,7 @@ M: David Howells <dhowells@redhat.com> M: David Woodhouse <dwmw2@infradead.org> L: keyrings@vger.kernel.org S: Maintained -F: Documentation/module-signing.txt +F: Documentation/admin-guide/module-signing.rst F: certs/ F: scripts/sign-file.c F: scripts/extract-cert.c @@ -4359,12 +4360,7 @@ L: iommu@lists.linux-foundation.org T: git git://git.infradead.org/users/hch/dma-mapping.git W: http://git.infradead.org/users/hch/dma-mapping.git S: Supported -F: lib/dma-debug.c -F: lib/dma-direct.c -F: lib/dma-noncoherent.c -F: lib/dma-virt.c -F: drivers/base/dma-mapping.c -F: drivers/base/dma-coherent.c +F: kernel/dma/ F: include/asm-generic/dma-mapping.h F: include/linux/dma-direct.h F: include/linux/dma-mapping.h @@ -4513,7 +4509,7 @@ DRM DRIVER FOR ILITEK ILI9225 PANELS M: David Lechner <david@lechnology.com> S: Maintained F: drivers/gpu/drm/tinydrm/ili9225.c -F: Documentation/devicetree/bindings/display/ili9225.txt +F: Documentation/devicetree/bindings/display/ilitek,ili9225.txt DRM DRIVER FOR INTEL I810 VIDEO CARDS S: Orphan / Obsolete @@ -4599,13 +4595,13 @@ DRM DRIVER FOR SITRONIX ST7586 PANELS M: David Lechner <david@lechnology.com> S: Maintained F: drivers/gpu/drm/tinydrm/st7586.c -F: Documentation/devicetree/bindings/display/st7586.txt +F: Documentation/devicetree/bindings/display/sitronix,st7586.txt DRM DRIVER FOR SITRONIX ST7735R PANELS M: David Lechner <david@lechnology.com> S: Maintained F: drivers/gpu/drm/tinydrm/st7735r.c -F: Documentation/devicetree/bindings/display/st7735r.txt +F: Documentation/devicetree/bindings/display/sitronix,st7735r.txt DRM DRIVER FOR TDFX VIDEO CARDS S: Orphan / Obsolete @@ -4638,7 +4634,6 @@ F: drivers/gpu/drm/ F: drivers/gpu/vga/ F: Documentation/devicetree/bindings/display/ F: Documentation/devicetree/bindings/gpu/ -F: Documentation/devicetree/bindings/video/ F: Documentation/gpu/ F: include/drm/ F: include/uapi/drm/ @@ -4683,7 +4678,7 @@ M: Boris Brezillon <boris.brezillon@bootlin.com> L: dri-devel@lists.freedesktop.org S: Supported F: drivers/gpu/drm/atmel-hlcdc/ -F: Documentation/devicetree/bindings/drm/atmel/ +F: Documentation/devicetree/bindings/display/atmel/ T: git git://anongit.freedesktop.org/drm/drm-misc DRM DRIVERS FOR BRIDGE CHIPS @@ -4714,7 +4709,7 @@ S: Supported F: drivers/gpu/drm/fsl-dcu/ F: Documentation/devicetree/bindings/display/fsl,dcu.txt F: Documentation/devicetree/bindings/display/fsl,tcon.txt -F: Documentation/devicetree/bindings/display/panel/nec,nl4827hc19_05b.txt +F: Documentation/devicetree/bindings/display/panel/nec,nl4827hc19-05b.txt DRM DRIVERS FOR FREESCALE IMX M: Philipp Zabel <p.zabel@pengutronix.de> @@ -4824,7 +4819,7 @@ M: Eric Anholt <eric@anholt.net> S: Supported F: drivers/gpu/drm/v3d/ F: include/uapi/drm/v3d_drm.h -F: Documentation/devicetree/bindings/display/brcm,bcm-v3d.txt +F: Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt T: git git://anongit.freedesktop.org/drm/drm-misc DRM DRIVERS FOR VC4 @@ -5735,7 +5730,7 @@ M: Madalin Bucur <madalin.bucur@nxp.com> L: netdev@vger.kernel.org S: Maintained F: drivers/net/ethernet/freescale/fman -F: Documentation/devicetree/bindings/powerpc/fsl/fman.txt +F: Documentation/devicetree/bindings/net/fsl-fman.txt FREESCALE QORIQ PTP CLOCK DRIVER M: Yangbo Lu <yangbo.lu@nxp.com> @@ -6501,7 +6496,7 @@ L: linux-mm@kvack.org S: Maintained F: mm/hmm* F: include/linux/hmm* -F: Documentation/vm/hmm.txt +F: Documentation/vm/hmm.rst HOST AP DRIVER M: Jouni Malinen <j@w1.fi> @@ -6966,7 +6961,7 @@ IIO MULTIPLEXER M: Peter Rosin <peda@axentia.se> L: linux-iio@vger.kernel.org S: Maintained -F: Documentation/devicetree/bindings/iio/multiplexer/iio-mux.txt +F: Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt F: drivers/iio/multiplexer/iio-mux.c IIO SUBSYSTEM AND DRIVERS @@ -7401,7 +7396,7 @@ F: drivers/platform/x86/intel-wmi-thunderbolt.c INTEL(R) TRACE HUB M: Alexander Shishkin <alexander.shishkin@linux.intel.com> S: Supported -F: Documentation/trace/intel_th.txt +F: Documentation/trace/intel_th.rst F: drivers/hwtracing/intel_th/ INTEL(R) TRUSTED EXECUTION TECHNOLOGY (TXT) @@ -7425,7 +7420,7 @@ M: Linus Walleij <linus.walleij@linaro.org> L: linux-iio@vger.kernel.org S: Maintained F: drivers/iio/gyro/mpu3050* -F: Documentation/devicetree/bindings/iio/gyroscope/inv,mpu3050.txt +F: Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt IOC3 ETHERNET DRIVER M: Ralf Baechle <ralf@linux-mips.org> @@ -8700,7 +8695,7 @@ M: Guenter Roeck <linux@roeck-us.net> L: linux-hwmon@vger.kernel.org S: Maintained F: Documentation/hwmon/max6697 -F: Documentation/devicetree/bindings/i2c/max6697.txt +F: Documentation/devicetree/bindings/hwmon/max6697.txt F: drivers/hwmon/max6697.c F: include/linux/platform_data/max6697.h @@ -9080,7 +9075,7 @@ M: Martin Donnelly <martin.donnelly@ge.com> M: Martyn Welch <martyn.welch@collabora.co.uk> S: Maintained F: drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c -F: Documentation/devicetree/bindings/video/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt +F: Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt MEGARAID SCSI/SAS DRIVERS M: Kashyap Desai <kashyap.desai@broadcom.com> @@ -9665,7 +9660,7 @@ F: include/uapi/linux/mmc/ MULTIPLEXER SUBSYSTEM M: Peter Rosin <peda@axentia.se> S: Maintained -F: Documentation/ABI/testing/mux/sysfs-class-mux* +F: Documentation/ABI/testing/sysfs-class-mux* F: Documentation/devicetree/bindings/mux/ F: include/linux/dt-bindings/mux/ F: include/linux/mux/ @@ -9696,7 +9691,7 @@ MXSFB DRM DRIVER M: Marek Vasut <marex@denx.de> S: Supported F: drivers/gpu/drm/mxsfb/ -F: Documentation/devicetree/bindings/display/mxsfb-drm.txt +F: Documentation/devicetree/bindings/display/mxsfb.txt MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE) M: Chris Lee <christopher.lee@cspi.com> @@ -10249,7 +10244,7 @@ F: arch/powerpc/include/asm/pnv-ocxl.h F: drivers/misc/ocxl/ F: include/misc/ocxl* F: include/uapi/misc/ocxl.h -F: Documentation/accelerators/ocxl.txt +F: Documentation/accelerators/ocxl.rst OMAP AUDIO SUPPORT M: Peter Ujfalusi <peter.ujfalusi@ti.com> @@ -10278,18 +10273,16 @@ F: arch/arm/boot/dts/*am5* F: arch/arm/boot/dts/*dra7* OMAP DISPLAY SUBSYSTEM and FRAMEBUFFER SUPPORT (DSS2) -M: Tomi Valkeinen <tomi.valkeinen@ti.com> L: linux-omap@vger.kernel.org L: linux-fbdev@vger.kernel.org -S: Maintained +S: Orphan F: drivers/video/fbdev/omap2/ F: Documentation/arm/OMAP/DSS OMAP FRAMEBUFFER SUPPORT -M: Tomi Valkeinen <tomi.valkeinen@ti.com> L: linux-fbdev@vger.kernel.org L: linux-omap@vger.kernel.org -S: Maintained +S: Orphan F: drivers/video/fbdev/omap/ OMAP GENERAL PURPOSE MEMORY CONTROLLER SUPPORT @@ -10733,7 +10726,7 @@ PARALLEL LCD/KEYPAD PANEL DRIVER M: Willy Tarreau <willy@haproxy.com> M: Ksenija Stanojevic <ksenija.stanojevic@gmail.com> S: Odd Fixes -F: Documentation/misc-devices/lcd-panel-cgram.txt +F: Documentation/auxdisplay/lcd-panel-cgram.txt F: drivers/misc/panel.c PARALLEL PORT SUBSYSTEM @@ -10890,7 +10883,7 @@ M: Will Deacon <will.deacon@arm.com> L: linux-pci@vger.kernel.org L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained -F: Documentation/devicetree/bindings/pci/controller-generic-pci.txt +F: Documentation/devicetree/bindings/pci/host-generic-pci.txt F: drivers/pci/controller/pci-host-common.c F: drivers/pci/controller/pci-host-generic.c @@ -11071,7 +11064,7 @@ M: Xiaowei Song <songxiaowei@hisilicon.com> M: Binghui Wang <wangbinghui@hisilicon.com> L: linux-pci@vger.kernel.org S: Maintained -F: Documentation/devicetree/bindings/pci/pcie-kirin.txt +F: Documentation/devicetree/bindings/pci/kirin-pcie.txt F: drivers/pci/controller/dwc/pcie-kirin.c PCIE DRIVER FOR HISILICON STB @@ -12462,7 +12455,7 @@ L: linux-crypto@vger.kernel.org L: linux-samsung-soc@vger.kernel.org S: Maintained F: drivers/crypto/exynos-rng.c -F: Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt +F: Documentation/devicetree/bindings/rng/samsung,exynos4-rng.txt SAMSUNG EXYNOS TRUE RANDOM NUMBER GENERATOR (TRNG) DRIVER M: Łukasz Stelmach <l.stelmach@samsung.com> @@ -13304,7 +13297,7 @@ M: Vinod Koul <vkoul@kernel.org> L: alsa-devel@alsa-project.org (moderated for non-subscribers) T: git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git S: Supported -F: Documentation/sound/alsa/compress_offload.txt +F: Documentation/sound/designs/compress-offload.rst F: include/sound/compress_driver.h F: include/uapi/sound/compress_* F: sound/core/compress_offload.c @@ -13325,7 +13318,7 @@ L: alsa-devel@alsa-project.org (moderated for non-subscribers) W: http://alsa-project.org/main/index.php/ASoC S: Supported F: Documentation/devicetree/bindings/sound/ -F: Documentation/sound/alsa/soc/ +F: Documentation/sound/soc/ F: sound/soc/ F: include/sound/soc* @@ -13584,7 +13577,7 @@ F: drivers/*/stm32-*timer* F: drivers/pwm/pwm-stm32* F: include/linux/*/stm32-*tim* F: Documentation/ABI/testing/*timer-stm32 -F: Documentation/devicetree/bindings/*/stm32-*timer +F: Documentation/devicetree/bindings/*/stm32-*timer* F: Documentation/devicetree/bindings/pwm/pwm-stm32* STMMAC ETHERNET DRIVER @@ -13655,7 +13648,7 @@ M: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> L: iommu@lists.linux-foundation.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb.git S: Supported -F: lib/swiotlb.c +F: kernel/dma/swiotlb.c F: arch/*/kernel/pci-swiotlb.c F: include/linux/swiotlb.h @@ -13807,7 +13800,7 @@ SYSTEM TRACE MODULE CLASS M: Alexander Shishkin <alexander.shishkin@linux.intel.com> S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/ash/stm.git -F: Documentation/trace/stm.txt +F: Documentation/trace/stm.rst F: drivers/hwtracing/stm/ F: include/linux/stm.h F: include/uapi/linux/stm.h @@ -14484,7 +14477,7 @@ M: Steven Rostedt <rostedt@goodmis.org> M: Ingo Molnar <mingo@redhat.com> T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core S: Maintained -F: Documentation/trace/ftrace.txt +F: Documentation/trace/ftrace.rst F: arch/*/*/*/ftrace.h F: arch/*/kernel/ftrace.c F: include/*/ftrace.h @@ -14953,7 +14946,7 @@ M: Heikki Krogerus <heikki.krogerus@linux.intel.com> L: linux-usb@vger.kernel.org S: Maintained F: Documentation/ABI/testing/sysfs-class-typec -F: Documentation/usb/typec.rst +F: Documentation/driver-api/usb/typec.rst F: drivers/usb/typec/ F: include/linux/usb/typec.h @@ -15582,6 +15575,13 @@ S: Maintained F: Documentation/x86/ F: arch/x86/ +X86 ENTRY CODE +M: Andy Lutomirski <luto@kernel.org> +L: linux-kernel@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/asm +S: Maintained +F: arch/x86/entry/ + X86 MCE INFRASTRUCTURE M: Tony Luck <tony.luck@intel.com> M: Borislav Petkov <bp@alien8.de> @@ -15604,7 +15604,7 @@ F: drivers/platform/x86/ F: drivers/platform/olpc/ X86 VDSO -M: Andy Lutomirski <luto@amacapital.net> +M: Andy Lutomirski <luto@kernel.org> L: linux-kernel@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/vdso S: Maintained @@ -15782,7 +15782,7 @@ YEALINK PHONE DRIVER M: Henk Vergonet <Henk.Vergonet@gmail.com> L: usbb2k-api-dev@nongnu.org S: Maintained -F: Documentation/input/yealink.rst +F: Documentation/input/devices/yealink.rst F: drivers/input/misc/yealink.* Z8530 DRIVER FOR AX.25 @@ -1,8 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 VERSION = 4 -PATCHLEVEL = 17 +PATCHLEVEL = 18 SUBLEVEL = 0 -EXTRAVERSION = +EXTRAVERSION = -rc1 NAME = Merciless Moray # *DOCUMENTATION* diff --git a/arch/Kconfig b/arch/Kconfig index 47b235d43909..1aa59063f1fd 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -403,7 +403,7 @@ config SECCOMP_FILTER in terms of Berkeley Packet Filter programs which implement task-defined system call filtering polices. - See Documentation/prctl/seccomp_filter.txt for details. + See Documentation/userspace-api/seccomp_filter.rst for details. preferred-plugin-hostcc := $(if-success,[ $(gcc-version) -ge 40800 ],$(HOSTCXX),$(HOSTCC)) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 483d2858e367..54eeb8d00bc6 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1302,7 +1302,7 @@ config SMP will run faster if you say N here. See also <file:Documentation/x86/i386/IO-APIC.txt>, - <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at + <file:Documentation/lockup-watchdogs.txt> and the SMP-HOWTO available at <http://tldp.org/HOWTO/SMP-HOWTO.html>. If you don't know what to do here, say N. diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index 869080bedb89..ec1a5fd0d294 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -35,7 +35,7 @@ * Start addresses are inclusive and end addresses are exclusive; * start addresses should be rounded down, end addresses up. * - * See Documentation/cachetlb.txt for more information. + * See Documentation/core-api/cachetlb.rst for more information. * Please note that the implementation of these, and the required * effects are cache-type (VIVT/VIPT/PIPT) specific. * diff --git a/arch/arm64/include/asm/cacheflush.h b/arch/arm64/include/asm/cacheflush.h index 0094c6653b06..d264a7274811 100644 --- a/arch/arm64/include/asm/cacheflush.h +++ b/arch/arm64/include/asm/cacheflush.h @@ -36,7 +36,7 @@ * Start addresses are inclusive and end addresses are exclusive; start * addresses should be rounded down, end addresses up. * - * See Documentation/cachetlb.txt for more information. Please note that + * See Documentation/core-api/cachetlb.rst for more information. Please note that * the implementation assumes non-aliasing VIPT D-cache and (aliasing) * VIPT I-cache. * diff --git a/arch/microblaze/include/asm/cacheflush.h b/arch/microblaze/include/asm/cacheflush.h index ffea82a16d2c..b091de77b15b 100644 --- a/arch/microblaze/include/asm/cacheflush.h +++ b/arch/microblaze/include/asm/cacheflush.h @@ -19,7 +19,7 @@ #include <linux/mm.h> #include <linux/io.h> -/* Look at Documentation/cachetlb.txt */ +/* Look at Documentation/core-api/cachetlb.rst */ /* * Cache handling functions. diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 4d8f64d48597..c480770fabcd 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -275,7 +275,7 @@ config SMP machines, but will use only one CPU of a multiprocessor machine. On a uniprocessor machine, the kernel will run faster if you say N. - See also <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO + See also <file:Documentation/lockup-watchdogs.txt> and the SMP-HOWTO available at <http://www.tldp.org/docs.html#howto>. If you don't know what to do here, say N. diff --git a/arch/s390/include/asm/css_chars.h b/arch/s390/include/asm/css_chars.h index 0563fd3e8458..480bb02ccacd 100644 --- a/arch/s390/include/asm/css_chars.h +++ b/arch/s390/include/asm/css_chars.h @@ -6,36 +6,38 @@ struct css_general_char { u64 : 12; - u32 dynio : 1; /* bit 12 */ - u32 : 4; - u32 eadm : 1; /* bit 17 */ - u32 : 23; - u32 aif : 1; /* bit 41 */ - u32 : 3; - u32 mcss : 1; /* bit 45 */ - u32 fcs : 1; /* bit 46 */ - u32 : 1; - u32 ext_mb : 1; /* bit 48 */ - u32 : 7; - u32 aif_tdd : 1; /* bit 56 */ - u32 : 1; - u32 qebsm : 1; /* bit 58 */ - u32 : 2; - u32 aiv : 1; /* bit 61 */ - u32 : 5; - u32 aif_osa : 1; /* bit 67 */ - u32 : 12; - u32 eadm_rf : 1; /* bit 80 */ - u32 : 1; - u32 cib : 1; /* bit 82 */ - u32 : 5; - u32 fcx : 1; /* bit 88 */ - u32 : 19; - u32 alt_ssi : 1; /* bit 108 */ - u32 : 1; - u32 narf : 1; /* bit 110 */ - u32 : 12; - u32 util_str : 1;/* bit 123 */ + u64 dynio : 1; /* bit 12 */ + u64 : 4; + u64 eadm : 1; /* bit 17 */ + u64 : 23; + u64 aif : 1; /* bit 41 */ + u64 : 3; + u64 mcss : 1; /* bit 45 */ + u64 fcs : 1; /* bit 46 */ + u64 : 1; + u64 ext_mb : 1; /* bit 48 */ + u64 : 7; + u64 aif_tdd : 1; /* bit 56 */ + u64 : 1; + u64 qebsm : 1; /* bit 58 */ + u64 : 2; + u64 aiv : 1; /* bit 61 */ + u64 : 2; + + u64 : 3; + u64 aif_osa : 1; /* bit 67 */ + u64 : 12; + u64 eadm_rf : 1; /* bit 80 */ + u64 : 1; + u64 cib : 1; /* bit 82 */ + u64 : 5; + u64 fcx : 1; /* bit 88 */ + u64 : 19; + u64 alt_ssi : 1; /* bit 108 */ + u64 : 1; + u64 narf : 1; /* bit 110 */ + u64 : 12; + u64 util_str : 1;/* bit 123 */ } __packed; extern struct css_general_char css_general_characteristics; diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 4bedd1c97f29..dd4f3d3e644f 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -687,7 +687,7 @@ config SMP People using multiprocessor machines who say Y here should also say Y to "Enhanced Real Time Clock Support", below. - See also <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO + See also <file:Documentation/lockup-watchdogs.txt> and the SMP-HOWTO available at <http://www.tldp.org/docs.html#howto>. If you don't know what to do here, say N. diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 9a2b8877f174..0f535debf802 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -178,7 +178,7 @@ config SMP Y to "Enhanced Real Time Clock Support", below. The "Advanced Power Management" code will be disabled if you say Y here. - See also <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO + See also <file:Documentation/lockup-watchdogs.txt> and the SMP-HOWTO available at <http://www.tldp.org/docs.html#howto>. If you don't know what to do here, say N. diff --git a/arch/um/Kconfig.um b/arch/um/Kconfig.um index 3e7f228b22e1..20da5a8ca949 100644 --- a/arch/um/Kconfig.um +++ b/arch/um/Kconfig.um @@ -80,7 +80,7 @@ config MAGIC_SYSRQ On UML, this is accomplished by sending a "sysrq" command with mconsole, followed by the letter for the requested command. - The keys are documented in <file:Documentation/sysrq.txt>. Don't say Y + The keys are documented in <file:Documentation/admin-guide/sysrq.rst>. Don't say Y unless you really know what this hack does. config KERNEL_STACK_ORDER diff --git a/arch/unicore32/include/asm/cacheflush.h b/arch/unicore32/include/asm/cacheflush.h index 1d9132b66039..1c8b9f13a9e1 100644 --- a/arch/unicore32/include/asm/cacheflush.h +++ b/arch/unicore32/include/asm/cacheflush.h @@ -33,7 +33,7 @@ * Start addresses are inclusive and end addresses are exclusive; * start addresses should be rounded down, end addresses up. * - * See Documentation/cachetlb.txt for more information. + * See Documentation/core-api/cachetlb.rst for more information. * Please note that the implementation of these, and the required * effects are cache-type (VIVT/VIPT/PIPT) specific. * diff --git a/arch/x86/entry/vsyscall/vsyscall_64.c b/arch/x86/entry/vsyscall/vsyscall_64.c index 7782cdbcd67d..82ed001e8909 100644 --- a/arch/x86/entry/vsyscall/vsyscall_64.c +++ b/arch/x86/entry/vsyscall/vsyscall_64.c @@ -201,7 +201,7 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address) /* * Handle seccomp. regs->ip must be the original value. - * See seccomp_send_sigsys and Documentation/prctl/seccomp_filter.txt. + * See seccomp_send_sigsys and Documentation/userspace-api/seccomp_filter.rst. * * We could optimize the seccomp disabled case, but performance * here doesn't matter. diff --git a/arch/xtensa/include/asm/cacheflush.h b/arch/xtensa/include/asm/cacheflush.h index 397d6a1a4224..a0d50be5a8cb 100644 --- a/arch/xtensa/include/asm/cacheflush.h +++ b/arch/xtensa/include/asm/cacheflush.h @@ -88,7 +88,7 @@ static inline void __invalidate_icache_page_alias(unsigned long virt, * * Pages can get remapped. Because this might change the 'color' of that page, * we have to flush the cache before the PTE is changed. - * (see also Documentation/cachetlb.txt) + * (see also Documentation/core-api/cachetlb.rst) */ #if defined(CONFIG_MMU) && \ @@ -152,7 +152,7 @@ void local_flush_cache_page(struct vm_area_struct *vma, __invalidate_icache_range(start,(end) - (start)); \ } while (0) -/* This is not required, see Documentation/cachetlb.txt */ +/* This is not required, see Documentation/core-api/cachetlb.rst */ #define flush_icache_page(vma,page) do { } while (0) #define flush_dcache_mmap_lock(mapping) do { } while (0) diff --git a/block/Kconfig b/block/Kconfig index 28ec55752b68..eb50fd4977c2 100644 --- a/block/Kconfig +++ b/block/Kconfig @@ -114,7 +114,7 @@ config BLK_DEV_THROTTLING one needs to mount and use blkio cgroup controller for creating cgroups and specifying per device IO rate policies. - See Documentation/cgroups/blkio-controller.txt for more information. + See Documentation/cgroup-v1/blkio-controller.txt for more information. config BLK_DEV_THROTTLING_LOW bool "Block throttling .low limit interface support (EXPERIMENTAL)" diff --git a/block/blk-mq-tag.c b/block/blk-mq-tag.c index 70356a2a11ab..09b2ee6694fb 100644 --- a/block/blk-mq-tag.c +++ b/block/blk-mq-tag.c @@ -311,35 +311,6 @@ void blk_mq_tagset_busy_iter(struct blk_mq_tag_set *tagset, } EXPORT_SYMBOL(blk_mq_tagset_busy_iter); -int blk_mq_tagset_iter(struct blk_mq_tag_set *set, void *data, - int (fn)(void *, struct request *)) -{ - int i, j, ret = 0; - - if (WARN_ON_ONCE(!fn)) - goto out; - - for (i = 0; i < set->nr_hw_queues; i++) { - struct blk_mq_tags *tags = set->tags[i]; - - if (!tags) - continue; - - for (j = 0; j < tags->nr_tags; j++) { - if (!tags->static_rqs[j]) - continue; - - ret = fn(data, tags->static_rqs[j]); - if (ret) - goto out; - } - } - -out: - return ret; -} -EXPORT_SYMBOL_GPL(blk_mq_tagset_iter); - void blk_mq_queue_tag_busy_iter(struct request_queue *q, busy_iter_fn *fn, void *priv) { diff --git a/block/blk-mq.c b/block/blk-mq.c index e9da5e6a8526..70c65bb6c013 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -671,6 +671,7 @@ static void __blk_mq_requeue_request(struct request *rq) if (blk_mq_request_started(rq)) { WRITE_ONCE(rq->state, MQ_RQ_IDLE); + rq->rq_flags &= ~RQF_TIMED_OUT; if (q->dma_drain_size && blk_rq_bytes(rq)) rq->nr_phys_segments--; } @@ -770,6 +771,7 @@ EXPORT_SYMBOL(blk_mq_tag_to_rq); static void blk_mq_rq_timed_out(struct request *req, bool reserved) { + req->rq_flags |= RQF_TIMED_OUT; if (req->q->mq_ops->timeout) { enum blk_eh_timer_return ret; @@ -779,6 +781,7 @@ static void blk_mq_rq_timed_out(struct request *req, bool reserved) WARN_ON_ONCE(ret != BLK_EH_RESET_TIMER); } + req->rq_flags &= ~RQF_TIMED_OUT; blk_add_timer(req); } @@ -788,6 +791,8 @@ static bool blk_mq_req_expired(struct request *rq, unsigned long *next) if (blk_mq_rq_state(rq) != MQ_RQ_IN_FLIGHT) return false; + if (rq->rq_flags & RQF_TIMED_OUT) + return false; deadline = blk_rq_deadline(rq); if (time_after_eq(jiffies, deadline)) @@ -2349,7 +2354,6 @@ static void blk_mq_del_queue_tag_set(struct request_queue *q) mutex_lock(&set->tag_list_lock); list_del_rcu(&q->tag_set_list); - INIT_LIST_HEAD(&q->tag_set_list); if (list_is_singular(&set->tag_list)) { /* just transitioned to unshared */ set->flags &= ~BLK_MQ_F_TAG_SHARED; @@ -2357,8 +2361,8 @@ static void blk_mq_del_queue_tag_set(struct request_queue *q) blk_mq_update_tag_set_depth(set, false); } mutex_unlock(&set->tag_list_lock); - synchronize_rcu(); + INIT_LIST_HEAD(&q->tag_set_list); } static void blk_mq_add_queue_tag_set(struct blk_mq_tag_set *set, diff --git a/block/blk-tag.c b/block/blk-tag.c index 24b20d86bcbc..fbc153aef166 100644 --- a/block/blk-tag.c +++ b/block/blk-tag.c @@ -188,7 +188,6 @@ int blk_queue_init_tags(struct request_queue *q, int depth, */ q->queue_tags = tags; queue_flag_set_unlocked(QUEUE_FLAG_QUEUED, q); - INIT_LIST_HEAD(&q->tag_busy_list); return 0; } EXPORT_SYMBOL(blk_queue_init_tags); @@ -374,27 +373,6 @@ int blk_queue_start_tag(struct request_queue *q, struct request *rq) rq->tag = tag; bqt->tag_index[tag] = rq; blk_start_request(rq); - list_add(&rq->queuelist, &q->tag_busy_list); return 0; } EXPORT_SYMBOL(blk_queue_start_tag); - -/** - * blk_queue_invalidate_tags - invalidate all pending tags - * @q: the request queue for the device - * - * Description: - * Hardware conditions may dictate a need to stop all pending requests. - * In this case, we will safely clear the block side of the tag queue and - * readd all requests to the request queue in the right order. - **/ -void blk_queue_invalidate_tags(struct request_queue *q) -{ - struct list_head *tmp, *n; - - lockdep_assert_held(q->queue_lock); - - list_for_each_safe(tmp, n, &q->tag_busy_list) - blk_requeue_request(q, list_entry_rq(tmp)); -} -EXPORT_SYMBOL(blk_queue_invalidate_tags); diff --git a/block/bsg.c b/block/bsg.c index 132e657e2d91..66602c489956 100644 --- a/block/bsg.c +++ b/block/bsg.c @@ -693,6 +693,8 @@ static struct bsg_device *bsg_add_device(struct inode *inode, struct bsg_device *bd; unsigned char buf[32]; + lockdep_assert_held(&bsg_mutex); + if (!blk_get_queue(rq)) return ERR_PTR(-ENXIO); @@ -707,14 +709,12 @@ static struct bsg_device *bsg_add_device(struct inode *inode, bsg_set_block(bd, file); atomic_set(&bd->ref_count, 1); - mutex_lock(&bsg_mutex); hlist_add_head(&bd->dev_list, bsg_dev_idx_hash(iminor(inode))); strncpy(bd->name, dev_name(rq->bsg_dev.class_dev), sizeof(bd->name) - 1); bsg_dbg(bd, "bound to <%s>, max queue %d\n", format_dev_t(buf, inode->i_rdev), bd->max_queue); - mutex_unlock(&bsg_mutex); return bd; } @@ -722,7 +722,7 @@ static struct bsg_device *__bsg_get_device(int minor, struct request_queue *q) { struct bsg_device *bd; - mutex_lock(&bsg_mutex); + lockdep_assert_held(&bsg_mutex); hlist_for_each_entry(bd, bsg_dev_idx_hash(minor), dev_list) { if (bd->queue == q) { @@ -732,7 +732,6 @@ static struct bsg_device *__bsg_get_device(int minor, struct request_queue *q) } bd = NULL; found: - mutex_unlock(&bsg_mutex); return bd; } @@ -746,17 +745,18 @@ static struct bsg_device *bsg_get_device(struct inode *inode, struct file *file) */ mutex_lock(&bsg_mutex); bcd = idr_find(&bsg_minor_idr, iminor(inode)); - mutex_unlock(&bsg_mutex); - if (!bcd) - return ERR_PTR(-ENODEV); + if (!bcd) { + bd = ERR_PTR(-ENODEV); + goto out_unlock; + } bd = __bsg_get_device(iminor(inode), bcd->queue); - if (bd) - return bd; - - bd = bsg_add_device(inode, bcd->queue, file); + if (!bd) + bd = bsg_add_device(inode, bcd->queue, file); +out_unlock: + mutex_unlock(&bsg_mutex); return bd; } diff --git a/certs/Kconfig b/certs/Kconfig index 5f7663df6e8e..c94e93d8bccf 100644 --- a/certs/Kconfig +++ b/certs/Kconfig @@ -13,7 +13,7 @@ config MODULE_SIG_KEY If this option is unchanged from its default "certs/signing_key.pem", then the kernel will automatically generate the private key and - certificate as described in Documentation/module-signing.txt + certificate as described in Documentation/admin-guide/module-signing.rst config SYSTEM_TRUSTED_KEYRING bool "Provide system-wide ring of trusted keys" diff --git a/crypto/asymmetric_keys/asymmetric_type.c b/crypto/asymmetric_keys/asymmetric_type.c index 39aecad286fe..26539e9a8bda 100644 --- a/crypto/asymmetric_keys/asymmetric_type.c +++ b/crypto/asymmetric_keys/asymmetric_type.c @@ -1,6 +1,6 @@ /* Asymmetric public-key cryptography key type * - * See Documentation/security/asymmetric-keys.txt + * See Documentation/crypto/asymmetric-keys.txt * * Copyright (C) 2012 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) diff --git a/crypto/asymmetric_keys/signature.c b/crypto/asymmetric_keys/signature.c index 11b7ba170904..28198314bc39 100644 --- a/crypto/asymmetric_keys/signature.c +++ b/crypto/asymmetric_keys/signature.c @@ -1,6 +1,6 @@ /* Signature verification with an asymmetric key * - * See Documentation/security/asymmetric-keys.txt + * See Documentation/crypto/asymmetric-keys.txt * * Copyright (C) 2012 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) diff --git a/drivers/base/Makefile b/drivers/base/Makefile index b074f242a435..704f44295810 100644 --- a/drivers/base/Makefile +++ b/drivers/base/Makefile @@ -8,10 +8,7 @@ obj-y := component.o core.o bus.o dd.o syscore.o \ topology.o container.o property.o cacheinfo.o \ devcon.o obj-$(CONFIG_DEVTMPFS) += devtmpfs.o -obj-$(CONFIG_DMA_CMA) += dma-contiguous.o obj-y += power/ -obj-$(CONFIG_HAS_DMA) += dma-mapping.o -obj-$(CONFIG_HAVE_GENERIC_DMA_COHERENT) += dma-coherent.o obj-$(CONFIG_ISA_BUS_API) += isa.o obj-y += firmware_loader/ obj-$(CONFIG_NUMA) += node.o diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 410c30c42120..212f447938ae 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -81,7 +81,7 @@ config PRINTER corresponding drivers into the kernel. To compile this driver as a module, choose M here and read - <file:Documentation/parport.txt>. The module will be called lp. + <file:Documentation/admin-guide/parport.rst>. The module will be called lp. If you have several parallel ports, you can specify which ports to use with the "lp" kernel command line option. (Try "man bootparam" diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index a24a6afb50b6..9760b526ca31 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -6,7 +6,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * Standard functionality for the common clock API. See Documentation/clk.txt + * Standard functionality for the common clock API. See Documentation/driver-api/clk.rst */ #include <linux/clk.h> @@ -2747,7 +2747,7 @@ static int __clk_core_init(struct clk_core *core) goto out; } - /* check that clk_ops are sane. See Documentation/clk.txt */ + /* check that clk_ops are sane. See Documentation/driver-api/clk.rst */ if (core->ops->set_rate && !((core->ops->round_rate || core->ops->determine_rate) && core->ops->recalc_rate)) { diff --git a/drivers/clk/ingenic/cgu.h b/drivers/clk/ingenic/cgu.h index 542192376ebf..502bcbb61b04 100644 --- a/drivers/clk/ingenic/cgu.h +++ b/drivers/clk/ingenic/cgu.h @@ -194,7 +194,7 @@ struct ingenic_cgu { /** * struct ingenic_clk - private data for a clock - * @hw: see Documentation/clk.txt + * @hw: see Documentation/driver-api/clk.rst * @cgu: a pointer to the CGU data * @idx: the index of this clock in cgu->clock_info */ diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index b451354735d3..08ba8473a284 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -38,7 +38,7 @@ * Each device has a channels list, which runs unlocked but is never modified * once the device is registered, it's just setup by the driver. * - * See Documentation/dmaengine.txt for more details + * See Documentation/driver-api/dmaengine for more details */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt diff --git a/drivers/firmware/dmi-id.c b/drivers/firmware/dmi-id.c index 951b6c79f166..624a11cb07e2 100644 --- a/drivers/firmware/dmi-id.c +++ b/drivers/firmware/dmi-id.c @@ -47,6 +47,7 @@ DEFINE_DMI_ATTR_WITH_SHOW(product_name, 0444, DMI_PRODUCT_NAME); DEFINE_DMI_ATTR_WITH_SHOW(product_version, 0444, DMI_PRODUCT_VERSION); DEFINE_DMI_ATTR_WITH_SHOW(product_serial, 0400, DMI_PRODUCT_SERIAL); DEFINE_DMI_ATTR_WITH_SHOW(product_uuid, 0400, DMI_PRODUCT_UUID); +DEFINE_DMI_ATTR_WITH_SHOW(product_sku, 0444, DMI_PRODUCT_SKU); DEFINE_DMI_ATTR_WITH_SHOW(product_family, 0444, DMI_PRODUCT_FAMILY); DEFINE_DMI_ATTR_WITH_SHOW(board_vendor, 0444, DMI_BOARD_VENDOR); DEFINE_DMI_ATTR_WITH_SHOW(board_name, 0444, DMI_BOARD_NAME); @@ -193,6 +194,7 @@ static void __init dmi_id_init_attr_table(void) ADD_DMI_ATTR(product_serial, DMI_PRODUCT_SERIAL); ADD_DMI_ATTR(product_uuid, DMI_PRODUCT_UUID); ADD_DMI_ATTR(product_family, DMI_PRODUCT_FAMILY); + ADD_DMI_ATTR(product_sku, DMI_PRODUCT_SKU); ADD_DMI_ATTR(board_vendor, DMI_BOARD_VENDOR); ADD_DMI_ATTR(board_name, DMI_BOARD_NAME); ADD_DMI_ATTR(board_version, DMI_BOARD_VERSION); diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index 54e66adef252..f2483548cde9 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -447,6 +447,7 @@ static void __init dmi_decode(const struct dmi_header *dm, void *dummy) dmi_save_ident(dm, DMI_PRODUCT_VERSION, 6); dmi_save_ident(dm, DMI_PRODUCT_SERIAL, 7); dmi_save_uuid(dm, DMI_PRODUCT_UUID, 8); + dmi_save_ident(dm, DMI_PRODUCT_SKU, 25); dmi_save_ident(dm, DMI_PRODUCT_FAMILY, 26); break; case 2: /* Base Board Information */ diff --git a/drivers/gpu/drm/shmobile/Kconfig b/drivers/gpu/drm/shmobile/Kconfig index c987c826daa3..0426d66660d1 100644 --- a/drivers/gpu/drm/shmobile/Kconfig +++ b/drivers/gpu/drm/shmobile/Kconfig @@ -2,7 +2,6 @@ config DRM_SHMOBILE tristate "DRM Support for SH Mobile" depends on DRM && ARM depends on ARCH_SHMOBILE || COMPILE_TEST - depends on FB_SH_MOBILE_MERAM || !FB_SH_MOBILE_MERAM select BACKLIGHT_CLASS_DEVICE select BACKLIGHT_LCD_SUPPORT select DRM_KMS_HELPER diff --git a/drivers/gpu/drm/shmobile/shmob_drm_crtc.c b/drivers/gpu/drm/shmobile/shmob_drm_crtc.c index e7738939a86d..40df8887fc17 100644 --- a/drivers/gpu/drm/shmobile/shmob_drm_crtc.c +++ b/drivers/gpu/drm/shmobile/shmob_drm_crtc.c @@ -21,8 +21,6 @@ #include <drm/drm_gem_cma_helper.h> #include <drm/drm_plane_helper.h> -#include <video/sh_mobile_meram.h> - #include "shmob_drm_backlight.h" #include "shmob_drm_crtc.h" #include "shmob_drm_drv.h" @@ -47,20 +45,12 @@ static int shmob_drm_clk_on(struct shmob_drm_device *sdev) if (ret < 0) return ret; } -#if 0 - if (sdev->meram_dev && sdev->meram_dev->pdev) - pm_runtime_get_sync(&sdev->meram_dev->pdev->dev); -#endif return 0; } static void shmob_drm_clk_off(struct shmob_drm_device *sdev) { -#if 0 - if (sdev->meram_dev && sdev->meram_dev->pdev) - pm_runtime_put_sync(&sdev->meram_dev->pdev->dev); -#endif if (sdev->clock) clk_disable_unprepare(sdev->clock); } @@ -269,12 +259,6 @@ static void shmob_drm_crtc_stop(struct shmob_drm_crtc *scrtc) if (!scrtc->started) return; - /* Disable the MERAM cache. */ - if (scrtc->cache) { - sh_mobile_meram_cache_free(sdev->meram, scrtc->cache); - scrtc->cache = NULL; - } - /* Stop the LCDC. */ shmob_drm_crtc_start_stop(scrtc, false); @@ -305,7 +289,6 @@ static void shmob_drm_crtc_compute_base(struct shmob_drm_crtc *scrtc, { struct drm_crtc *crtc = &scrtc->crtc; struct drm_framebuffer *fb = crtc->primary->fb; - struct shmob_drm_device *sdev = crtc->dev->dev_private; struct drm_gem_cma_object *gem; unsigned int bpp; @@ -321,11 +304,6 @@ static void shmob_drm_crtc_compute_base(struct shmob_drm_crtc *scrtc, + y / (bpp == 4 ? 2 : 1) * fb->pitches[1] + x * (bpp == 16 ? 2 : 1); } - - if (scrtc->cache) - sh_mobile_meram_cache_update(sdev->meram, scrtc->cache, - scrtc->dma[0], scrtc->dma[1], - &scrtc->dma[0], &scrtc->dma[1]); } static void shmob_drm_crtc_update_base(struct shmob_drm_crtc *scrtc) @@ -372,9 +350,7 @@ static int shmob_drm_crtc_mode_set(struct drm_crtc *crtc, { struct shmob_drm_crtc *scrtc = to_shmob_crtc(crtc); struct shmob_drm_device *sdev = crtc->dev->dev_private; - const struct sh_mobile_meram_cfg *mdata = sdev->pdata->meram; const struct shmob_drm_format_info *format; - void *cache; format = shmob_drm_format_info(crtc->primary->fb->format->format); if (format == NULL) { @@ -386,24 +362,6 @@ static int shmob_drm_crtc_mode_set(struct drm_crtc *crtc, scrtc->format = format; scrtc->line_size = crtc->primary->fb->pitches[0]; - if (sdev->meram) { - /* Enable MERAM cache if configured. We need to de-init - * configured ICBs before we can re-initialize them. - */ - if (scrtc->cache) { - sh_mobile_meram_cache_free(sdev->meram, scrtc->cache); - scrtc->cache = NULL; - } - - cache = sh_mobile_meram_cache_alloc(sdev->meram, mdata, - crtc->primary->fb->pitches[0], - adjusted_mode->vdisplay, - format->meram, - &scrtc->line_size); - if (!IS_ERR(cache)) - scrtc->cache = cache; - } - shmob_drm_crtc_compute_base(scrtc, x, y); return 0; diff --git a/drivers/gpu/drm/shmobile/shmob_drm_crtc.h b/drivers/gpu/drm/shmobile/shmob_drm_crtc.h index f152973df11c..c11f421737dc 100644 --- a/drivers/gpu/drm/shmobile/shmob_drm_crtc.h +++ b/drivers/gpu/drm/shmobile/shmob_drm_crtc.h @@ -28,7 +28,6 @@ struct shmob_drm_crtc { int dpms; const struct shmob_drm_format_info *format; - void *cache; unsigned long dma[2]; unsigned int line_size; bool started; diff --git a/drivers/gpu/drm/shmobile/shmob_drm_drv.h b/drivers/gpu/drm/shmobile/shmob_drm_drv.h index 02ea315ba69a..088a6e55fa29 100644 --- a/drivers/gpu/drm/shmobile/shmob_drm_drv.h +++ b/drivers/gpu/drm/shmobile/shmob_drm_drv.h @@ -23,7 +23,6 @@ struct clk; struct device; struct drm_device; -struct sh_mobile_meram_info; struct shmob_drm_device { struct device *dev; @@ -31,7 +30,6 @@ struct shmob_drm_device { void __iomem *mmio; struct clk *clock; - struct sh_mobile_meram_info *meram; u32 lddckr; u32 ldmt1r; diff --git a/drivers/gpu/drm/shmobile/shmob_drm_kms.c b/drivers/gpu/drm/shmobile/shmob_drm_kms.c index d36919b14da7..447638581c08 100644 --- a/drivers/gpu/drm/shmobile/shmob_drm_kms.c +++ b/drivers/gpu/drm/shmobile/shmob_drm_kms.c @@ -18,8 +18,6 @@ #include <drm/drm_gem_cma_helper.h> #include <drm/drm_gem_framebuffer_helper.h> -#include <video/sh_mobile_meram.h> - #include "shmob_drm_crtc.h" #include "shmob_drm_drv.h" #include "shmob_drm_kms.h" @@ -35,55 +33,46 @@ static const struct shmob_drm_format_info shmob_drm_format_infos[] = { .bpp = 16, .yuv = false, .lddfr = LDDFR_PKF_RGB16, - .meram = SH_MOBILE_MERAM_PF_RGB, }, { .fourcc = DRM_FORMAT_RGB888, .bpp = 24, .yuv = false, .lddfr = LDDFR_PKF_RGB24, - .meram = SH_MOBILE_MERAM_PF_RGB, }, { .fourcc = DRM_FORMAT_ARGB8888, .bpp = 32, .yuv = false, .lddfr = LDDFR_PKF_ARGB32, - .meram = SH_MOBILE_MERAM_PF_RGB, }, { .fourcc = DRM_FORMAT_NV12, .bpp = 12, .yuv = true, .lddfr = LDDFR_CC | LDDFR_YF_420, - .meram = SH_MOBILE_MERAM_PF_NV, }, { .fourcc = DRM_FORMAT_NV21, .bpp = 12, .yuv = true, .lddfr = LDDFR_CC | LDDFR_YF_420, - .meram = SH_MOBILE_MERAM_PF_NV, }, { .fourcc = DRM_FORMAT_NV16, .bpp = 16, .yuv = true, .lddfr = LDDFR_CC | LDDFR_YF_422, - .meram = SH_MOBILE_MERAM_PF_NV, }, { .fourcc = DRM_FORMAT_NV61, .bpp = 16, .yuv = true, .lddfr = LDDFR_CC | LDDFR_YF_422, - .meram = SH_MOBILE_MERAM_PF_NV, }, { .fourcc = DRM_FORMAT_NV24, .bpp = 24, .yuv = true, .lddfr = LDDFR_CC | LDDFR_YF_444, - .meram = SH_MOBILE_MERAM_PF_NV24, }, { .fourcc = DRM_FORMAT_NV42, .bpp = 24, .yuv = true, .lddfr = LDDFR_CC | LDDFR_YF_444, - .meram = SH_MOBILE_MERAM_PF_NV24, }, }; diff --git a/drivers/gpu/drm/shmobile/shmob_drm_kms.h b/drivers/gpu/drm/shmobile/shmob_drm_kms.h index 06d5b7caa026..753e2817dc2c 100644 --- a/drivers/gpu/drm/shmobile/shmob_drm_kms.h +++ b/drivers/gpu/drm/shmobile/shmob_drm_kms.h @@ -24,7 +24,6 @@ struct shmob_drm_format_info { unsigned int bpp; bool yuv; u32 lddfr; - unsigned int meram; }; const struct shmob_drm_format_info *shmob_drm_format_info(u32 fourcc); diff --git a/drivers/gpu/drm/shmobile/shmob_drm_plane.c b/drivers/gpu/drm/shmobile/shmob_drm_plane.c index 97f6e4a3eb0d..1d0359f713ca 100644 --- a/drivers/gpu/drm/shmobile/shmob_drm_plane.c +++ b/drivers/gpu/drm/shmobile/shmob_drm_plane.c @@ -17,8 +17,6 @@ #include <drm/drm_fb_cma_helper.h> #include <drm/drm_gem_cma_helper.h> -#include <video/sh_mobile_meram.h> - #include "shmob_drm_drv.h" #include "shmob_drm_kms.h" #include "shmob_drm_plane.h" diff --git a/drivers/gpu/vga/Kconfig b/drivers/gpu/vga/Kconfig index 29437eabe095..b677e5d524e6 100644 --- a/drivers/gpu/vga/Kconfig +++ b/drivers/gpu/vga/Kconfig @@ -6,7 +6,7 @@ config VGA_ARB Some "legacy" VGA devices implemented on PCI typically have the same hard-decoded addresses as they did on ISA. When multiple PCI devices are accessed at same time they need some kind of coordination. Please - see Documentation/vgaarbiter.txt for more details. Select this to + see Documentation/gpu/vgaarbiter.rst for more details. Select this to enable VGA arbiter. config VGA_ARB_MAX_GPUS diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c index 1c5e74cb9279..c61b04555779 100644 --- a/drivers/gpu/vga/vgaarb.c +++ b/drivers/gpu/vga/vgaarb.c @@ -1,6 +1,6 @@ /* * vgaarb.c: Implements the VGA arbitration. For details refer to - * Documentation/vgaarbiter.txt + * Documentation/gpu/vgaarbiter.rst * * * (C) Copyright 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org> diff --git a/drivers/hid/hid-google-hammer.c b/drivers/hid/hid-google-hammer.c index 7b8e17b03cb8..6bf4da7ad63a 100644 --- a/drivers/hid/hid-google-hammer.c +++ b/drivers/hid/hid-google-hammer.c @@ -124,6 +124,8 @@ static const struct hid_device_id hammer_devices[] = { USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_STAFF) }, { HID_DEVICE(BUS_USB, HID_GROUP_GENERIC, USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_WAND) }, + { HID_DEVICE(BUS_USB, HID_GROUP_GENERIC, + USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_WHISKERS) }, { } }; MODULE_DEVICE_TABLE(hid, hammer_devices); diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index a85634fe033f..c7981ddd8776 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -452,6 +452,7 @@ #define USB_DEVICE_ID_GOOGLE_TOUCH_ROSE 0x5028 #define USB_DEVICE_ID_GOOGLE_STAFF 0x502b #define USB_DEVICE_ID_GOOGLE_WAND 0x502d +#define USB_DEVICE_ID_GOOGLE_WHISKERS 0x5030 #define USB_VENDOR_ID_GOTOP 0x08f2 #define USB_DEVICE_ID_SUPER_Q2 0x007f diff --git a/drivers/hid/hid-steam.c b/drivers/hid/hid-steam.c index cb86cc834201..0422ec2b13d2 100644 --- a/drivers/hid/hid-steam.c +++ b/drivers/hid/hid-steam.c @@ -573,7 +573,7 @@ static bool steam_is_valve_interface(struct hid_device *hdev) static int steam_client_ll_parse(struct hid_device *hdev) { - struct steam_device *steam = hid_get_drvdata(hdev); + struct steam_device *steam = hdev->driver_data; return hid_parse_report(hdev, steam->hdev->dev_rdesc, steam->hdev->dev_rsize); @@ -590,7 +590,7 @@ static void steam_client_ll_stop(struct hid_device *hdev) static int steam_client_ll_open(struct hid_device *hdev) { - struct steam_device *steam = hid_get_drvdata(hdev); + struct steam_device *steam = hdev->driver_data; int ret; ret = hid_hw_open(steam->hdev); @@ -605,7 +605,7 @@ static int steam_client_ll_open(struct hid_device *hdev) static void steam_client_ll_close(struct hid_device *hdev) { - struct steam_device *steam = hid_get_drvdata(hdev); + struct steam_device *steam = hdev->driver_data; mutex_lock(&steam->mutex); steam->client_opened = false; @@ -623,7 +623,7 @@ static int steam_client_ll_raw_request(struct hid_device *hdev, size_t count, unsigned char report_type, int reqtype) { - struct steam_device *steam = hid_get_drvdata(hdev); + struct steam_device *steam = hdev->driver_data; return hid_hw_raw_request(steam->hdev, reportnum, buf, count, report_type, reqtype); @@ -710,7 +710,7 @@ static int steam_probe(struct hid_device *hdev, ret = PTR_ERR(steam->client_hdev); goto client_hdev_fail; } - hid_set_drvdata(steam->client_hdev, steam); + steam->client_hdev->driver_data = steam; /* * With the real steam controller interface, do not connect hidraw. diff --git a/drivers/hid/intel-ish-hid/ipc/pci-ish.c b/drivers/hid/intel-ish-hid/ipc/pci-ish.c index 582e449be9fe..a2c53ea3b5ed 100644 --- a/drivers/hid/intel-ish-hid/ipc/pci-ish.c +++ b/drivers/hid/intel-ish-hid/ipc/pci-ish.c @@ -205,8 +205,7 @@ static void ish_remove(struct pci_dev *pdev) kfree(ishtp_dev); } -#ifdef CONFIG_PM -static struct device *ish_resume_device; +static struct device __maybe_unused *ish_resume_device; /* 50ms to get resume response */ #define WAIT_FOR_RESUME_ACK_MS 50 @@ -220,7 +219,7 @@ static struct device *ish_resume_device; * in that case a simple resume message is enough, others we need * a reset sequence. */ -static void ish_resume_handler(struct work_struct *work) +static void __maybe_unused ish_resume_handler(struct work_struct *work) { struct pci_dev *pdev = to_pci_dev(ish_resume_device); struct ishtp_device *dev = pci_get_drvdata(pdev); @@ -262,7 +261,7 @@ static void ish_resume_handler(struct work_struct *work) * * Return: 0 to the pm core */ -static int ish_suspend(struct device *device) +static int __maybe_unused ish_suspend(struct device *device) { struct pci_dev *pdev = to_pci_dev(device); struct ishtp_device *dev = pci_get_drvdata(pdev); @@ -288,7 +287,7 @@ static int ish_suspend(struct device *device) return 0; } -static DECLARE_WORK(resume_work, ish_resume_handler); +static __maybe_unused DECLARE_WORK(resume_work, ish_resume_handler); /** * ish_resume() - ISH resume callback * @device: device pointer @@ -297,7 +296,7 @@ static DECLARE_WORK(resume_work, ish_resume_handler); * * Return: 0 to the pm core */ -static int ish_resume(struct device *device) +static int __maybe_unused ish_resume(struct device *device) { struct pci_dev *pdev = to_pci_dev(device); struct ishtp_device *dev = pci_get_drvdata(pdev); @@ -311,21 +310,14 @@ static int ish_resume(struct device *device) return 0; } -static const struct dev_pm_ops ish_pm_ops = { - .suspend = ish_suspend, - .resume = ish_resume, -}; -#define ISHTP_ISH_PM_OPS (&ish_pm_ops) -#else -#define ISHTP_ISH_PM_OPS NULL -#endif /* CONFIG_PM */ +static SIMPLE_DEV_PM_OPS(ish_pm_ops, ish_suspend, ish_resume); static struct pci_driver ish_driver = { .name = KBUILD_MODNAME, .id_table = ish_pci_tbl, .probe = ish_probe, .remove = ish_remove, - .driver.pm = ISHTP_ISH_PM_OPS, + .driver.pm = &ish_pm_ops, }; module_pci_driver(ish_driver); diff --git a/drivers/hid/usbhid/Kconfig b/drivers/hid/usbhid/Kconfig index 0108c5991a04..e50d8fe4d36c 100644 --- a/drivers/hid/usbhid/Kconfig +++ b/drivers/hid/usbhid/Kconfig @@ -14,7 +14,7 @@ config USB_HID You can't use this driver and the HIDBP (Boot Protocol) keyboard and mouse drivers at the same time. More information is available: - <file:Documentation/input/input.txt>. + <file:Documentation/input/input.rst>. If unsure, say Y. diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c index c101369b51de..d6797535fff9 100644 --- a/drivers/hid/wacom_sys.c +++ b/drivers/hid/wacom_sys.c @@ -395,6 +395,14 @@ static void wacom_usage_mapping(struct hid_device *hdev, } } + /* 2nd-generation Intuos Pro Large has incorrect Y maximum */ + if (hdev->vendor == USB_VENDOR_ID_WACOM && + hdev->product == 0x0358 && + WACOM_PEN_FIELD(field) && + wacom_equivalent_usage(usage->hid) == HID_GD_Y) { + field->logical_maximum = 43200; + } + switch (usage->hid) { case HID_GD_X: features->x_max = field->logical_maximum; diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig index ff8037798779..c5992cd195a1 100644 --- a/drivers/input/Kconfig +++ b/drivers/input/Kconfig @@ -16,7 +16,7 @@ config INPUT Say N here if you have a headless (no monitor, no keyboard) system. - More information is available: <file:Documentation/input/input.txt> + More information is available: <file:Documentation/input/input.rst> If unsure, say Y. @@ -144,7 +144,7 @@ config INPUT_JOYDEV If unsure, say Y. - More information is available: <file:Documentation/input/joystick.txt> + More information is available: <file:Documentation/input/joydev/joystick.rst> To compile this driver as a module, choose M here: the module will be called joydev. diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig index 9591fc04a8ab..d8f9c6e1fc08 100644 --- a/drivers/input/joystick/Kconfig +++ b/drivers/input/joystick/Kconfig @@ -9,7 +9,7 @@ menuconfig INPUT_JOYSTICK and the list of supported devices will be displayed. This option doesn't affect the kernel. - Please read the file <file:Documentation/input/joystick.txt> which + Please read the file <file:Documentation/input/joydev/joystick.rst> which contains more information. if INPUT_JOYSTICK @@ -25,7 +25,7 @@ config JOYSTICK_ANALOG Flightstick Pro, ThrustMaster FCS, 6 and 8 button gamepads, or Saitek Cyborg joysticks. - Please read the file <file:Documentation/input/joystick.txt> which + Please read the file <file:Documentation/input/joydev/joystick.rst> which contains more information. To compile this driver as a module, choose M here: the @@ -214,7 +214,7 @@ config JOYSTICK_DB9 gamepad, Sega Saturn gamepad, or a Multisystem -- Atari, Amiga, Commodore, Amstrad CPC joystick connected to your parallel port. For more information on how to use the driver please read - <file:Documentation/input/joystick-parport.txt>. + <file:Documentation/input/devices/joystick-parport.rst>. To compile this driver as a module, choose M here: the module will be called db9. @@ -229,7 +229,7 @@ config JOYSTICK_GAMECON Sony PlayStation gamepad or a Multisystem -- Atari, Amiga, Commodore, Amstrad CPC joystick connected to your parallel port. For more information on how to use the driver please read - <file:Documentation/input/joystick-parport.txt>. + <file:Documentation/input/devices/joystick-parport.rst>. To compile this driver as a module, choose M here: the module will be called gamecon. @@ -241,7 +241,7 @@ config JOYSTICK_TURBOGRAFX Say Y here if you have the TurboGraFX interface by Steffen Schwenke, and want to use it with Multisystem -- Atari, Amiga, Commodore, Amstrad CPC joystick. For more information on how to use the driver - please read <file:Documentation/input/joystick-parport.txt>. + please read <file:Documentation/input/devices/joystick-parport.rst>. To compile this driver as a module, choose M here: the module will be called turbografx. @@ -287,7 +287,7 @@ config JOYSTICK_XPAD and/or "Event interface support" (CONFIG_INPUT_EVDEV) as well. For information about how to connect the X-Box pad to USB, see - <file:Documentation/input/xpad.txt>. + <file:Documentation/input/devices/xpad.rst>. To compile this driver as a module, choose M here: the module will be called xpad. @@ -313,7 +313,7 @@ config JOYSTICK_WALKERA0701 Say Y or M here if you have a Walkera WK-0701 transmitter which is supplied with a ready to fly Walkera helicopters such as HM36, HM37, HM60 and want to use it via parport as a joystick. More - information is available: <file:Documentation/input/walkera0701.txt> + information is available: <file:Documentation/input/devices/walkera0701.rst> To compile this driver as a module, choose M here: the module will be called walkera0701. diff --git a/drivers/input/joystick/iforce/Kconfig b/drivers/input/joystick/iforce/Kconfig index 8fde22a021b3..ab4dbcbcbf50 100644 --- a/drivers/input/joystick/iforce/Kconfig +++ b/drivers/input/joystick/iforce/Kconfig @@ -27,6 +27,6 @@ config JOYSTICK_IFORCE_232 connected to your serial (COM) port. You will need an additional utility called inputattach, see - <file:Documentation/input/joystick.txt> - and <file:Documentation/input/ff.txt>. + <file:Documentation/input/joydev/joystick.rst> + and <file:Documentation/input/ff.rst>. diff --git a/drivers/input/joystick/walkera0701.c b/drivers/input/joystick/walkera0701.c index 36a5b93156ed..dce313dc260a 100644 --- a/drivers/input/joystick/walkera0701.c +++ b/drivers/input/joystick/walkera0701.c @@ -3,7 +3,7 @@ * * Copyright (c) 2008 Peter Popovec * - * More about driver: <file:Documentation/input/walkera0701.txt> + * More about driver: <file:Documentation/input/devices/walkera0701.rst> */ /* diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 572b15fa18c2..c25606e00693 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -411,7 +411,7 @@ config INPUT_YEALINK usb sound driver, so you might want to enable that as well. For information about how to use these additional functions, see - <file:Documentation/input/yealink.txt>. + <file:Documentation/input/devices/yealink.rst>. To compile this driver as a module, choose M here: the module will be called yealink. @@ -595,7 +595,7 @@ config INPUT_GPIO_ROTARY_ENCODER depends on GPIOLIB || COMPILE_TEST help Say Y here to add support for rotary encoders connected to GPIO lines. - Check file:Documentation/input/rotary-encoder.txt for more + Check file:Documentation/input/devices/rotary-encoder.rst for more information. To compile this driver as a module, choose M here: the diff --git a/drivers/input/misc/rotary_encoder.c b/drivers/input/misc/rotary_encoder.c index 6d304381fc30..30ec77ad32c6 100644 --- a/drivers/input/misc/rotary_encoder.c +++ b/drivers/input/misc/rotary_encoder.c @@ -7,7 +7,7 @@ * state machine code inspired by code from Tim Ruetz * * A generic driver for rotary encoders connected to GPIO lines. - * See file:Documentation/input/rotary-encoder.txt for more information + * See file:Documentation/input/devices/rotary-encoder.rst for more information * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index f27f23f2d99a..566a1e3aa504 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -129,7 +129,7 @@ config MOUSE_PS2_ELANTECH This driver exposes some configuration registers via sysfs entries. For further information, - see <file:Documentation/input/elantech.txt>. + see <file:Documentation/input/devices/elantech.rst>. If unsure, say N. @@ -228,7 +228,7 @@ config MOUSE_APPLETOUCH scrolling in X11. For further information, see - <file:Documentation/input/appletouch.txt>. + <file:Documentation/input/devices/appletouch.rst>. To compile this driver as a module, choose M here: the module will be called appletouch. @@ -251,7 +251,7 @@ config MOUSE_BCM5974 The interface is currently identical to the appletouch interface, for further information, see - <file:Documentation/input/appletouch.txt>. + <file:Documentation/input/devices/appletouch.rst>. To compile this driver as a module, choose M here: the module will be called bcm5974. diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index cb5579716dba..0a6f7ca883e7 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -212,7 +212,7 @@ static void alps_set_abs_params_v7(struct alps_data *priv, static void alps_set_abs_params_ss4_v2(struct alps_data *priv, struct input_dev *dev1); -/* Packet formats are described in Documentation/input/alps.txt */ +/* Packet formats are described in Documentation/input/devices/alps.rst */ static bool alps_is_valid_first_byte(struct alps_data *priv, unsigned char data) diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig index ca4530eb3378..d90d9f1098ff 100644 --- a/drivers/input/serio/Kconfig +++ b/drivers/input/serio/Kconfig @@ -47,7 +47,7 @@ config SERIO_SERPORT Say Y here if you plan to use an input device (mouse, joystick, tablet, 6dof) that communicates over the RS232 serial (COM) port. - More information is available: <file:Documentation/input/input.txt> + More information is available: <file:Documentation/input/input.rst> If unsure, say Y. @@ -78,7 +78,7 @@ config SERIO_PARKBD Say Y here if you built a simple parallel port adapter to attach an additional AT keyboard, XT keyboard or PS/2 mouse. - More information is available: <file:Documentation/input/input.txt> + More information is available: <file:Documentation/input/input.rst> If unsure, say N. diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c index fd714ee881f7..2566b4d8b342 100644 --- a/drivers/input/touchscreen/wm97xx-core.c +++ b/drivers/input/touchscreen/wm97xx-core.c @@ -68,7 +68,7 @@ * The default values correspond to Mainstone II in QVGA mode * * Please read - * Documentation/input/input-programming.txt for more details. + * Documentation/input/input-programming.rst for more details. */ static int abs_x[3] = {150, 4000, 5}; diff --git a/drivers/lightnvm/pblk-rb.c b/drivers/lightnvm/pblk-rb.c index 00cd1f20a196..55e9442a99e2 100644 --- a/drivers/lightnvm/pblk-rb.c +++ b/drivers/lightnvm/pblk-rb.c @@ -38,7 +38,7 @@ void pblk_rb_data_free(struct pblk_rb *rb) /* * Initialize ring buffer. The data and metadata buffers must be previously * allocated and their size must be a power of two - * (Documentation/circular-buffers.txt) + * (Documentation/core-api/circular-buffers.rst) */ int pblk_rb_init(struct pblk_rb *rb, struct pblk_rb_entry *rb_entry_base, unsigned int power_size, unsigned int power_seg_sz) diff --git a/drivers/md/bcache/Kconfig b/drivers/md/bcache/Kconfig index 4d200883c505..17bf109c58e9 100644 --- a/drivers/md/bcache/Kconfig +++ b/drivers/md/bcache/Kconfig @@ -5,7 +5,7 @@ config BCACHE Allows a block device to be used as cache for other devices; uses a btree for indexing and the layout is optimized for SSDs. - See Documentation/bcache.txt for details. + See Documentation/admin-guide/bcache.rst for details. config BCACHE_DEBUG bool "Bcache debugging" diff --git a/drivers/md/bcache/btree.c b/drivers/md/bcache/btree.c index 2a0968c04e21..547c9eedc2f4 100644 --- a/drivers/md/bcache/btree.c +++ b/drivers/md/bcache/btree.c @@ -18,7 +18,7 @@ * as keys are inserted we only sort the pages that have not yet been written. * When garbage collection is run, we resort the entire node. * - * All configuration is done via sysfs; see Documentation/bcache.txt. + * All configuration is done via sysfs; see Documentation/admin-guide/bcache.rst. */ #include "bcache.h" diff --git a/drivers/md/bcache/extents.c b/drivers/md/bcache/extents.c index c334e6666461..1d096742eb41 100644 --- a/drivers/md/bcache/extents.c +++ b/drivers/md/bcache/extents.c @@ -18,7 +18,7 @@ * as keys are inserted we only sort the pages that have not yet been written. * When garbage collection is run, we resort the entire node. * - * All configuration is done via sysfs; see Documentation/bcache.txt. + * All configuration is done via sysfs; see Documentation/admin-guide/bcache.rst. */ #include "bcache.h" diff --git a/drivers/media/dvb-core/dvb_ringbuffer.c b/drivers/media/dvb-core/dvb_ringbuffer.c index 4330b6fa4af2..d1d471af0636 100644 --- a/drivers/media/dvb-core/dvb_ringbuffer.c +++ b/drivers/media/dvb-core/dvb_ringbuffer.c @@ -55,7 +55,7 @@ int dvb_ringbuffer_empty(struct dvb_ringbuffer *rbuf) * this pairs with smp_store_release() in dvb_ringbuffer_write(), * dvb_ringbuffer_write_user(), or dvb_ringbuffer_reset() * - * for memory barriers also see Documentation/circular-buffers.txt + * for memory barriers also see Documentation/core-api/circular-buffers.rst */ return (rbuf->pread == smp_load_acquire(&rbuf->pwrite)); } diff --git a/drivers/media/dvb-frontends/Kconfig b/drivers/media/dvb-frontends/Kconfig index 55e36a4f5215..9ecaa9d0744a 100644 --- a/drivers/media/dvb-frontends/Kconfig +++ b/drivers/media/dvb-frontends/Kconfig @@ -324,7 +324,7 @@ config DVB_SP8870 A DVB-T tuner module. Say Y when you want to support this frontend. This driver needs external firmware. Please use the command - "<kerneldir>/Documentation/dvb/get_dvb_firmware sp8870" to + "<kerneldir>/scripts/get_dvb_firmware sp8870" to download/extract it, and then copy it to /usr/lib/hotplug/firmware or /lib/firmware (depending on configuration of firmware hotplug). @@ -336,7 +336,7 @@ config DVB_SP887X A DVB-T tuner module. Say Y when you want to support this frontend. This driver needs external firmware. Please use the command - "<kerneldir>/Documentation/dvb/get_dvb_firmware sp887x" to + "<kerneldir>/scripts/get_dvb_firmware sp887x" to download/extract it, and then copy it to /usr/lib/hotplug/firmware or /lib/firmware (depending on configuration of firmware hotplug). @@ -387,8 +387,8 @@ config DVB_TDA1004X A DVB-T tuner module. Say Y when you want to support this frontend. This driver needs external firmware. Please use the commands - "<kerneldir>/Documentation/dvb/get_dvb_firmware tda10045", - "<kerneldir>/Documentation/dvb/get_dvb_firmware tda10046" to + "<kerneldir>/scripts/get_dvb_firmware tda10045", + "<kerneldir>/scripts/get_dvb_firmware tda10046" to download/extract them, and then copy them to /usr/lib/hotplug/firmware or /lib/firmware (depending on configuration of firmware hotplug). @@ -591,8 +591,8 @@ config DVB_NXT200X to support this frontend. This driver needs external firmware. Please use the commands - "<kerneldir>/Documentation/dvb/get_dvb_firmware nxt2002" and - "<kerneldir>/Documentation/dvb/get_dvb_firmware nxt2004" to + "<kerneldir>/scripts/get_dvb_firmware nxt2002" and + "<kerneldir>/scripts/get_dvb_firmware nxt2004" to download/extract them, and then copy them to /usr/lib/hotplug/firmware or /lib/firmware (depending on configuration of firmware hotplug). @@ -604,7 +604,7 @@ config DVB_OR51211 An ATSC 8VSB tuner module. Say Y when you want to support this frontend. This driver needs external firmware. Please use the command - "<kerneldir>/Documentation/dvb/get_dvb_firmware or51211" to + "<kerneldir>/scripts/get_dvb_firmware or51211" to download it, and then copy it to /usr/lib/hotplug/firmware or /lib/firmware (depending on configuration of firmware hotplug). @@ -617,8 +617,8 @@ config DVB_OR51132 to support this frontend. This driver needs external firmware. Please use the commands - "<kerneldir>/Documentation/dvb/get_dvb_firmware or51132_vsb" and/or - "<kerneldir>/Documentation/dvb/get_dvb_firmware or51132_qam" to + "<kerneldir>/scripts/get_dvb_firmware or51132_vsb" and/or + "<kerneldir>/scripts/get_dvb_firmware or51132_qam" to download firmwares for 8VSB and QAM64/256, respectively. Copy them to /usr/lib/hotplug/firmware or /lib/firmware (depending on configuration of firmware hotplug). diff --git a/drivers/media/dvb-frontends/dib3000.h b/drivers/media/dvb-frontends/dib3000.h index d5dfafb4ef13..d2b7523a22b5 100644 --- a/drivers/media/dvb-frontends/dib3000.h +++ b/drivers/media/dvb-frontends/dib3000.h @@ -17,7 +17,7 @@ * Amaury Demol from DiBcom for providing specs and driver * sources, on which this driver (and the dvb-dibusb) are based. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information * */ diff --git a/drivers/media/dvb-frontends/dib3000mb.c b/drivers/media/dvb-frontends/dib3000mb.c index de3ce2786c72..5861f346db49 100644 --- a/drivers/media/dvb-frontends/dib3000mb.c +++ b/drivers/media/dvb-frontends/dib3000mb.c @@ -17,7 +17,7 @@ * Amaury Demol from DiBcom for providing specs and driver * sources, on which this driver (and the dvb-dibusb) are based. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information * */ diff --git a/drivers/media/dvb-frontends/eds1547.h b/drivers/media/dvb-frontends/eds1547.h index c983f2f85802..30f067fc1f56 100644 --- a/drivers/media/dvb-frontends/eds1547.h +++ b/drivers/media/dvb-frontends/eds1547.h @@ -6,7 +6,7 @@ * under the terms of the GNU General Public License as published by the * Free Software Foundation, version 2. * -* see Documentation/dvb/README.dvb-usb for more information +* see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #ifndef EDS1547 diff --git a/drivers/media/dvb-frontends/nxt200x.c b/drivers/media/dvb-frontends/nxt200x.c index 7aa74403648e..a6cc4952eb74 100644 --- a/drivers/media/dvb-frontends/nxt200x.c +++ b/drivers/media/dvb-frontends/nxt200x.c @@ -27,8 +27,8 @@ * ATI HDTV Wonder (NXT2004) * * This driver needs external firmware. Please use the command - * "<kerneldir>/Documentation/dvb/get_dvb_firmware nxt2002" or - * "<kerneldir>/Documentation/dvb/get_dvb_firmware nxt2004" to + * "<kerneldir>/scripts/get_dvb_firmware nxt2002" or + * "<kerneldir>/scripts/get_dvb_firmware nxt2004" to * download/extract the appropriate firmware, and then copy it to * /usr/lib/hotplug/firmware/ or /lib/firmware/ * (depending on configuration of firmware hotplug). diff --git a/drivers/media/dvb-frontends/or51211.c b/drivers/media/dvb-frontends/or51211.c index a1b7c301828f..b65ba34fd00a 100644 --- a/drivers/media/dvb-frontends/or51211.c +++ b/drivers/media/dvb-frontends/or51211.c @@ -22,7 +22,7 @@ /* * This driver needs external firmware. Please use the command - * "<kerneldir>/Documentation/dvb/get_dvb_firmware or51211" to + * "<kerneldir>/scripts/get_dvb_firmware or51211" to * download/extract it, and then copy it to /usr/lib/hotplug/firmware * or /lib/firmware (depending on configuration of firmware hotplug). */ diff --git a/drivers/media/dvb-frontends/sp8870.c b/drivers/media/dvb-frontends/sp8870.c index 9a726f3a4896..1d57a20093fc 100644 --- a/drivers/media/dvb-frontends/sp8870.c +++ b/drivers/media/dvb-frontends/sp8870.c @@ -21,7 +21,7 @@ */ /* * This driver needs external firmware. Please use the command - * "<kerneldir>/Documentation/dvb/get_dvb_firmware alps_tdlb7" to + * "<kerneldir>/scripts/get_dvb_firmware alps_tdlb7" to * download/extract it, and then copy it to /usr/lib/hotplug/firmware * or /lib/firmware (depending on configuration of firmware hotplug). */ diff --git a/drivers/media/dvb-frontends/sp887x.c b/drivers/media/dvb-frontends/sp887x.c index f39d566d7d1d..57a0d0ae2b48 100644 --- a/drivers/media/dvb-frontends/sp887x.c +++ b/drivers/media/dvb-frontends/sp887x.c @@ -4,7 +4,7 @@ /* * This driver needs external firmware. Please use the command - * "<kerneldir>/Documentation/dvb/get_dvb_firmware sp887x" to + * "<kerneldir>/scripts/get_dvb_firmware sp887x" to * download/extract it, and then copy it to /usr/lib/hotplug/firmware * or /lib/firmware (depending on configuration of firmware hotplug). */ diff --git a/drivers/media/dvb-frontends/tda1004x.c b/drivers/media/dvb-frontends/tda1004x.c index 58e3beff5adc..7dcfb4a4b2d0 100644 --- a/drivers/media/dvb-frontends/tda1004x.c +++ b/drivers/media/dvb-frontends/tda1004x.c @@ -21,8 +21,8 @@ */ /* * This driver needs external firmware. Please use the commands - * "<kerneldir>/Documentation/dvb/get_dvb_firmware tda10045", - * "<kerneldir>/Documentation/dvb/get_dvb_firmware tda10046" to + * "<kerneldir>/scripts/get_dvb_firmware tda10045", + * "<kerneldir>/scripts/get_dvb_firmware tda10046" to * download/extract them, and then copy them to /usr/lib/hotplug/firmware * or /lib/firmware (depending on configuration of firmware hotplug). */ diff --git a/drivers/media/dvb-frontends/tda10071.c b/drivers/media/dvb-frontends/tda10071.c index a59f4fd09df6..1ed67c08e699 100644 --- a/drivers/media/dvb-frontends/tda10071.c +++ b/drivers/media/dvb-frontends/tda10071.c @@ -852,7 +852,7 @@ static int tda10071_init(struct dvb_frontend *fe) ret = request_firmware(&fw, fw_file, &client->dev); if (ret) { dev_err(&client->dev, - "did not find the firmware file. (%s) Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)\n", + "did not find the firmware file '%s' (status %d). You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware\n", fw_file, ret); goto error; } diff --git a/drivers/media/dvb-frontends/z0194a.h b/drivers/media/dvb-frontends/z0194a.h index 96d86d6eb473..0871c1ade94c 100644 --- a/drivers/media/dvb-frontends/z0194a.h +++ b/drivers/media/dvb-frontends/z0194a.h @@ -6,7 +6,7 @@ * under the terms of the GNU General Public License as published by the * Free Software Foundation, version 2. * -* see Documentation/dvb/README.dvb-usb for more information +* see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #ifndef Z0194A diff --git a/drivers/media/i2c/max2175.c b/drivers/media/i2c/max2175.c index 87cba15b2977..008a082cb8ad 100644 --- a/drivers/media/i2c/max2175.c +++ b/drivers/media/i2c/max2175.c @@ -1202,7 +1202,7 @@ static const struct v4l2_ctrl_ops max2175_ctrl_ops = { /* * I2S output enable/disable configuration. This is a private control. - * Refer to Documentation/media/v4l-drivers/max2175 for more details. + * Refer to Documentation/media/v4l-drivers/max2175.rst for more details. */ static const struct v4l2_ctrl_config max2175_i2s_en = { .ops = &max2175_ctrl_ops, @@ -1218,7 +1218,7 @@ static const struct v4l2_ctrl_config max2175_i2s_en = { /* * HSLS value control LO freq adjacent location configuration. - * Refer to Documentation/media/v4l-drivers/max2175 for more details. + * Refer to Documentation/media/v4l-drivers/max2175.rst for more details. */ static const struct v4l2_ctrl_config max2175_hsls = { .ops = &max2175_ctrl_ops, @@ -1234,7 +1234,7 @@ static const struct v4l2_ctrl_config max2175_hsls = { /* * Rx modes below are a set of preset configurations that decides the tuner's * sck and sample rate of transmission. They are separate for EU & NA regions. - * Refer to Documentation/media/v4l-drivers/max2175 for more details. + * Refer to Documentation/media/v4l-drivers/max2175.rst for more details. */ static const char * const max2175_ctrl_eu_rx_modes[] = { [MAX2175_EU_FM_1_2] = "EU FM 1.2", diff --git a/drivers/media/pci/bt8xx/Kconfig b/drivers/media/pci/bt8xx/Kconfig index 4a93f6ded100..bc89e37608cd 100644 --- a/drivers/media/pci/bt8xx/Kconfig +++ b/drivers/media/pci/bt8xx/Kconfig @@ -16,7 +16,7 @@ config VIDEO_BT848 ---help--- Support for BT848 based frame grabber/overlay boards. This includes the Miro, Hauppauge and STB boards. Please read the material in - <file:Documentation/video4linux/bttv/> for more information. + <file:Documentation/media/v4l-drivers/bttv.rst> for more information. To compile this driver as a module, choose M here: the module will be called bttv. diff --git a/drivers/media/pci/cx18/cx18-dvb.c b/drivers/media/pci/cx18/cx18-dvb.c index 010f39eafce1..a3a7f7065349 100644 --- a/drivers/media/pci/cx18/cx18-dvb.c +++ b/drivers/media/pci/cx18/cx18-dvb.c @@ -152,7 +152,7 @@ static int yuan_mpc718_mt352_reqfw(struct cx18_stream *stream, if (ret) { CX18_ERR("The MPC718 board variant with the MT352 DVB-T demodulator will not work without it\n"); - CX18_ERR("Run 'linux/Documentation/dvb/get_dvb_firmware mpc718' if you need the firmware\n"); + CX18_ERR("Run 'linux/scripts/get_dvb_firmware mpc718' if you need the firmware\n"); } return ret; } diff --git a/drivers/media/pci/cx18/cx18-streams.c b/drivers/media/pci/cx18/cx18-streams.c index a594cfdeca20..b36f4ce25d22 100644 --- a/drivers/media/pci/cx18/cx18-streams.c +++ b/drivers/media/pci/cx18/cx18-streams.c @@ -853,7 +853,7 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) /* * Audio related reset according to - * Documentation/video4linux/cx2341x/fw-encoder-api.txt + * Documentation/media/v4l-drivers/cx2341x.rst */ if (atomic_read(&cx->ana_capturing) == 0) cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 2, @@ -861,7 +861,7 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) /* * Number of lines for Field 1 & Field 2 according to - * Documentation/video4linux/cx2341x/fw-encoder-api.txt + * Documentation/media/v4l-drivers/cx2341x.rst * Field 1 is 312 for 625 line systems in BT.656 * Field 2 is 313 for 625 line systems in BT.656 */ diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c index 3a1c55187b2a..9f50748fdf56 100644 --- a/drivers/media/pci/cx23885/cx23885-cards.c +++ b/drivers/media/pci/cx23885/cx23885-cards.c @@ -2426,7 +2426,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) ret = request_firmware(&fw, filename, &dev->pci->dev); if (ret != 0) - pr_err("did not find the firmware file. (%s) Please see linux/Documentation/dvb/ for more details on firmware-problems.", + pr_err("did not find the firmware file '%s'. You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware.", filename); else altera_init(&netup_config, fw); diff --git a/drivers/media/pci/meye/Kconfig b/drivers/media/pci/meye/Kconfig index 2e60334ffef5..9a50f54231ad 100644 --- a/drivers/media/pci/meye/Kconfig +++ b/drivers/media/pci/meye/Kconfig @@ -5,7 +5,7 @@ config VIDEO_MEYE ---help--- This is the video4linux driver for the Motion Eye camera found in the Vaio Picturebook laptops. Please read the material in - <file:Documentation/video4linux/meye.txt> for more information. + <file:Documentation/media/v4l-drivers/meye.rst> for more information. If you say Y or M here, you need to say Y or M to "Sony Laptop Extras" in the misc device section. diff --git a/drivers/media/pci/ttpci/Kconfig b/drivers/media/pci/ttpci/Kconfig index 7b83151ed6c4..dfba74dd6521 100644 --- a/drivers/media/pci/ttpci/Kconfig +++ b/drivers/media/pci/ttpci/Kconfig @@ -24,7 +24,7 @@ config DVB_AV7110 onboard MPEG2 decoder. This driver needs an external firmware. Please use the script - "<kerneldir>/Documentation/dvb/get_dvb_firmware av7110" to + "<kerneldir>/scripts/get_dvb_firmware av7110" to download/extract it, and then copy it to /usr/lib/hotplug/firmware or /lib/firmware (depending on configuration of firmware hotplug). diff --git a/drivers/media/platform/pxa_camera.c b/drivers/media/platform/pxa_camera.c index 4d5a26b4cdda..d85ffbfb7c1f 100644 --- a/drivers/media/platform/pxa_camera.c +++ b/drivers/media/platform/pxa_camera.c @@ -1021,7 +1021,7 @@ static void pxa_camera_wakeup(struct pxa_camera_dev *pcdev, * - a videobuffer is queued on the pcdev->capture list * * Please check the "DMA hot chaining timeslice issue" in - * Documentation/video4linux/pxa_camera.txt + * Documentation/media/v4l-drivers/pxa_camera.rst * * Context: should only be called within the dma irq handler */ @@ -1443,7 +1443,7 @@ static void pxac_vb2_queue(struct vb2_buffer *vb) /* * Please check the DMA prepared buffer structure in : - * Documentation/video4linux/pxa_camera.txt + * Documentation/media/v4l-drivers/pxa_camera.rst * Please check also in pxa_camera_check_link_miss() to understand why DMA chain * modification while DMA chain is running will work anyway. */ diff --git a/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c b/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c index 242342fd7ede..9897213f2618 100644 --- a/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c +++ b/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c @@ -1111,7 +1111,7 @@ static void sh_mobile_ceu_put_formats(struct soc_camera_device *icd) /* * CEU can scale and crop, but we don't want to waste bandwidth and kill the * framerate by always requesting the maximum image from the client. See - * Documentation/video4linux/sh_mobile_ceu_camera.txt for a description of + * Documentation/media/v4l-drivers/sh_mobile_ceu_camera.rst for a description of * scaling and cropping algorithms and for the meaning of referenced here steps. */ static int sh_mobile_ceu_set_selection(struct soc_camera_device *icd, diff --git a/drivers/media/platform/via-camera.c b/drivers/media/platform/via-camera.c index f01c3e813247..c8bb82fe0b9d 100644 --- a/drivers/media/platform/via-camera.c +++ b/drivers/media/platform/via-camera.c @@ -27,7 +27,12 @@ #include <linux/via-core.h> #include <linux/via-gpio.h> #include <linux/via_i2c.h> + +#ifdef CONFIG_X86 #include <asm/olpc.h> +#else +#define machine_is_olpc(x) 0 +#endif #include "via-camera.h" diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig index 39b04ad924c0..9b99dfb2d0c6 100644 --- a/drivers/media/radio/Kconfig +++ b/drivers/media/radio/Kconfig @@ -35,7 +35,7 @@ config RADIO_SI476X In order to control your radio card, you will need to use programs that are compatible with the Video For Linux 2 API. Information on this API and pointers to "v4l2" programs may be found at - <file:Documentation/video4linux/API.html>. + <file:Documentation/media/media_uapi.rst>. To compile this driver as a module, choose M here: the module will be called radio-si476x. @@ -75,7 +75,7 @@ config RADIO_MAXIRADIO In order to control your radio card, you will need to use programs that are compatible with the Video For Linux API. Information on this API and pointers to "v4l" programs may be found at - <file:Documentation/video4linux/API.html>. + <file:Documentation/media/media_uapi.rst>. To compile this driver as a module, choose M here: the module will be called radio-maxiradio. @@ -93,7 +93,7 @@ config RADIO_SHARK In order to control your radio card, you will need to use programs that are compatible with the Video For Linux API. Information on this API and pointers to "v4l" programs may be found at - <file:Documentation/video4linux/API.html>. + <file:Documentation/media/media_uapi.rst>. To compile this driver as a module, choose M here: the module will be called radio-shark. @@ -110,7 +110,7 @@ config RADIO_SHARK2 In order to control your radio card, you will need to use programs that are compatible with the Video For Linux API. Information on this API and pointers to "v4l" programs may be found at - <file:Documentation/video4linux/API.html>. + <file:Documentation/media/media_uapi.rst>. To compile this driver as a module, choose M here: the module will be called radio-shark2. @@ -217,7 +217,7 @@ config RADIO_WL1273 In order to control your radio card, you will need to use programs that are compatible with the Video For Linux 2 API. Information on this API and pointers to "v4l2" programs may be found at - <file:Documentation/video4linux/API.html>. + <file:Documentation/media/media_uapi.rst>. To compile this driver as a module, choose M here: the module will be called radio-wl1273. @@ -272,7 +272,7 @@ config RADIO_RTRACK been reported to be used by these cards. More information is contained in the file - <file:Documentation/video4linux/radiotrack.txt>. + <file:Documentation/media/v4l-drivers/radiotrack.rst>. To compile this driver as a module, choose M here: the module will be called radio-aimslab. diff --git a/drivers/media/radio/si470x/Kconfig b/drivers/media/radio/si470x/Kconfig index a21172e413a9..6dbb158cd2a0 100644 --- a/drivers/media/radio/si470x/Kconfig +++ b/drivers/media/radio/si470x/Kconfig @@ -29,7 +29,7 @@ config USB_SI470X Please have a look at the documentation, especially on how to redirect the audio stream from the radio to your sound device: - Documentation/video4linux/si470x.txt + Documentation/media/v4l-drivers/si470x.rst Say Y here if you want to connect this type of radio to your computer's USB port. diff --git a/drivers/media/radio/wl128x/Kconfig b/drivers/media/radio/wl128x/Kconfig index 2add222ea346..64b66bbdae72 100644 --- a/drivers/media/radio/wl128x/Kconfig +++ b/drivers/media/radio/wl128x/Kconfig @@ -12,6 +12,6 @@ config RADIO_WL128X In order to control your radio card, you will need to use programs that are compatible with the Video For Linux 2 API. Information on this API and pointers to "v4l2" programs may be found at - <file:Documentation/video4linux/API.html>. + <file:Documentation/media/media_uapi.rst>. endmenu diff --git a/drivers/media/usb/dvb-usb-v2/Kconfig b/drivers/media/usb/dvb-usb-v2/Kconfig index 37053477b84d..082b8d67244b 100644 --- a/drivers/media/usb/dvb-usb-v2/Kconfig +++ b/drivers/media/usb/dvb-usb-v2/Kconfig @@ -6,7 +6,7 @@ config DVB_USB_V2 USB1.1 and USB2.0 DVB devices. Almost every USB device needs a firmware, please look into - <file:Documentation/dvb/README.dvb-usb>. + <file:Documentation/media/dvb-drivers/dvb-usb.rst>. For a complete list of supported USB devices see the LinuxTV DVB Wiki: <https://linuxtv.org/wiki/index.php/DVB_USB> diff --git a/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c b/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c index afdcdbf005e9..955318ab7f5e 100644 --- a/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c +++ b/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c @@ -47,7 +47,7 @@ static int dvb_usbv2_download_firmware(struct dvb_usb_device *d, ret = request_firmware(&fw, name, &d->udev->dev); if (ret < 0) { dev_err(&d->udev->dev, - "%s: Did not find the firmware file '%s'. Please see linux/Documentation/dvb/ for more details on firmware-problems. Status %d\n", + "%s: Did not find the firmware file '%s' (status %d). You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware\n", KBUILD_MODNAME, name, ret); goto err; } diff --git a/drivers/media/usb/dvb-usb-v2/gl861.c b/drivers/media/usb/dvb-usb-v2/gl861.c index 4817dfd3e659..9d154fdae45b 100644 --- a/drivers/media/usb/dvb-usb-v2/gl861.c +++ b/drivers/media/usb/dvb-usb-v2/gl861.c @@ -4,7 +4,7 @@ * under the terms of the GNU General Public License as published by the * Free Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "gl861.h" diff --git a/drivers/media/usb/dvb-usb-v2/lmedm04.c b/drivers/media/usb/dvb-usb-v2/lmedm04.c index be26c029546b..0750a975bcb8 100644 --- a/drivers/media/usb/dvb-usb-v2/lmedm04.c +++ b/drivers/media/usb/dvb-usb-v2/lmedm04.c @@ -21,7 +21,7 @@ * * LME2510C + M88RS2000 * - * For firmware see Documentation/dvb/lmedm04.txt + * For firmware see Documentation/media/dvb-drivers/lmedm04.rst * * I2C addresses: * 0xd0 - STV0288 - Demodulator @@ -49,7 +49,7 @@ * GNU General Public License for more details. * * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information * * Known Issues : * LME2510: Non Intel USB chipsets fail to maintain High Speed on diff --git a/drivers/media/usb/dvb-usb-v2/lmedm04.h b/drivers/media/usb/dvb-usb-v2/lmedm04.h index e9c207205c2f..c4ae37c19512 100644 --- a/drivers/media/usb/dvb-usb-v2/lmedm04.h +++ b/drivers/media/usb/dvb-usb-v2/lmedm04.h @@ -16,7 +16,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #ifndef _DVB_USB_LME2510_H_ #define _DVB_USB_LME2510_H_ diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf.c b/drivers/media/usb/dvb-usb-v2/mxl111sf.c index 67953360fda5..4713ba65e1c2 100644 --- a/drivers/media/usb/dvb-usb-v2/mxl111sf.c +++ b/drivers/media/usb/dvb-usb-v2/mxl111sf.c @@ -5,7 +5,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include <linux/vmalloc.h> diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf.h b/drivers/media/usb/dvb-usb-v2/mxl111sf.h index 3e6f5880bd1e..22253d4908eb 100644 --- a/drivers/media/usb/dvb-usb-v2/mxl111sf.h +++ b/drivers/media/usb/dvb-usb-v2/mxl111sf.h @@ -5,7 +5,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #ifndef _DVB_USB_MXL111SF_H_ diff --git a/drivers/media/usb/dvb-usb/Kconfig b/drivers/media/usb/dvb-usb/Kconfig index 2651ae277347..b8a1c62a0682 100644 --- a/drivers/media/usb/dvb-usb/Kconfig +++ b/drivers/media/usb/dvb-usb/Kconfig @@ -6,7 +6,7 @@ config DVB_USB USB1.1 and USB2.0 DVB devices. Almost every USB device needs a firmware, please look into - <file:Documentation/dvb/README.dvb-usb>. + <file:Documentation/media/dvb-drivers/dvb-usb.rst>. For a complete list of supported USB devices see the LinuxTV DVB Wiki: <https://linuxtv.org/wiki/index.php/DVB_USB> diff --git a/drivers/media/usb/dvb-usb/a800.c b/drivers/media/usb/dvb-usb/a800.c index 540886b3bb29..198bd5eadb3f 100644 --- a/drivers/media/usb/dvb-usb/a800.c +++ b/drivers/media/usb/dvb-usb/a800.c @@ -11,7 +11,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "dibusb.h" diff --git a/drivers/media/usb/dvb-usb/af9005-fe.c b/drivers/media/usb/dvb-usb/af9005-fe.c index 544bdf18fb2f..7fbbc954da16 100644 --- a/drivers/media/usb/dvb-usb/af9005-fe.c +++ b/drivers/media/usb/dvb-usb/af9005-fe.c @@ -15,7 +15,7 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "af9005.h" #include "af9005-script.h" diff --git a/drivers/media/usb/dvb-usb/af9005-remote.c b/drivers/media/usb/dvb-usb/af9005-remote.c index 9b29ffa93075..f7cdcc8424a8 100644 --- a/drivers/media/usb/dvb-usb/af9005-remote.c +++ b/drivers/media/usb/dvb-usb/af9005-remote.c @@ -17,7 +17,7 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "af9005.h" /* debug */ diff --git a/drivers/media/usb/dvb-usb/af9005.c b/drivers/media/usb/dvb-usb/af9005.c index 986763b1b2b3..16e946e01d2c 100644 --- a/drivers/media/usb/dvb-usb/af9005.c +++ b/drivers/media/usb/dvb-usb/af9005.c @@ -15,7 +15,7 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "af9005.h" diff --git a/drivers/media/usb/dvb-usb/af9005.h b/drivers/media/usb/dvb-usb/af9005.h index a1eae0fa02ed..7ae4dc3a968b 100644 --- a/drivers/media/usb/dvb-usb/af9005.h +++ b/drivers/media/usb/dvb-usb/af9005.h @@ -15,7 +15,7 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #ifndef _DVB_USB_AF9005_H_ #define _DVB_USB_AF9005_H_ diff --git a/drivers/media/usb/dvb-usb/az6027.c b/drivers/media/usb/dvb-usb/az6027.c index f0d10ac03a37..6321b8e30261 100644 --- a/drivers/media/usb/dvb-usb/az6027.c +++ b/drivers/media/usb/dvb-usb/az6027.c @@ -7,7 +7,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "az6027.h" diff --git a/drivers/media/usb/dvb-usb/cxusb.c b/drivers/media/usb/dvb-usb/cxusb.c index b70d289dc738..5b51ed7d6243 100644 --- a/drivers/media/usb/dvb-usb/cxusb.c +++ b/drivers/media/usb/dvb-usb/cxusb.c @@ -21,7 +21,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include <media/tuner.h> #include <linux/vmalloc.h> diff --git a/drivers/media/usb/dvb-usb/dibusb-common.c b/drivers/media/usb/dvb-usb/dibusb-common.c index bcacb0f22028..fb1b4f2d5f9d 100644 --- a/drivers/media/usb/dvb-usb/dibusb-common.c +++ b/drivers/media/usb/dvb-usb/dibusb-common.c @@ -6,7 +6,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "dibusb.h" diff --git a/drivers/media/usb/dvb-usb/dibusb-mb.c b/drivers/media/usb/dvb-usb/dibusb-mb.c index a0057641cc86..408920577716 100644 --- a/drivers/media/usb/dvb-usb/dibusb-mb.c +++ b/drivers/media/usb/dvb-usb/dibusb-mb.c @@ -10,7 +10,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "dibusb.h" diff --git a/drivers/media/usb/dvb-usb/dibusb-mc-common.c b/drivers/media/usb/dvb-usb/dibusb-mc-common.c index 0c2bc97436d5..ec3a20a95b04 100644 --- a/drivers/media/usb/dvb-usb/dibusb-mc-common.c +++ b/drivers/media/usb/dvb-usb/dibusb-mc-common.c @@ -6,7 +6,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "dibusb.h" diff --git a/drivers/media/usb/dvb-usb/dibusb-mc.c b/drivers/media/usb/dvb-usb/dibusb-mc.c index 08fb8a3f6e0c..bce8ffe640ca 100644 --- a/drivers/media/usb/dvb-usb/dibusb-mc.c +++ b/drivers/media/usb/dvb-usb/dibusb-mc.c @@ -10,7 +10,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "dibusb.h" diff --git a/drivers/media/usb/dvb-usb/dibusb.h b/drivers/media/usb/dvb-usb/dibusb.h index 697be2a17ade..943df579b98b 100644 --- a/drivers/media/usb/dvb-usb/dibusb.h +++ b/drivers/media/usb/dvb-usb/dibusb.h @@ -6,7 +6,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #ifndef _DVB_USB_DIBUSB_H_ #define _DVB_USB_DIBUSB_H_ diff --git a/drivers/media/usb/dvb-usb/digitv.c b/drivers/media/usb/dvb-usb/digitv.c index 475a3c0cdee7..49b9d63e5885 100644 --- a/drivers/media/usb/dvb-usb/digitv.c +++ b/drivers/media/usb/dvb-usb/digitv.c @@ -9,7 +9,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "digitv.h" diff --git a/drivers/media/usb/dvb-usb/dtt200u-fe.c b/drivers/media/usb/dvb-usb/dtt200u-fe.c index 00f565fe7cc2..7e75aae34fb8 100644 --- a/drivers/media/usb/dvb-usb/dtt200u-fe.c +++ b/drivers/media/usb/dvb-usb/dtt200u-fe.c @@ -7,7 +7,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "dtt200u.h" diff --git a/drivers/media/usb/dvb-usb/dtt200u.c b/drivers/media/usb/dvb-usb/dtt200u.c index 512370786696..f03d26954517 100644 --- a/drivers/media/usb/dvb-usb/dtt200u.c +++ b/drivers/media/usb/dvb-usb/dtt200u.c @@ -9,7 +9,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "dtt200u.h" diff --git a/drivers/media/usb/dvb-usb/dtt200u.h b/drivers/media/usb/dvb-usb/dtt200u.h index efccc399b1cb..ea2a096c1650 100644 --- a/drivers/media/usb/dvb-usb/dtt200u.h +++ b/drivers/media/usb/dvb-usb/dtt200u.h @@ -7,7 +7,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #ifndef _DVB_USB_DTT200U_H_ #define _DVB_USB_DTT200U_H_ diff --git a/drivers/media/usb/dvb-usb/dvb-usb-firmware.c b/drivers/media/usb/dvb-usb/dvb-usb-firmware.c index 15c153e49382..42c207aacbb1 100644 --- a/drivers/media/usb/dvb-usb/dvb-usb-firmware.c +++ b/drivers/media/usb/dvb-usb/dvb-usb-firmware.c @@ -90,7 +90,7 @@ int dvb_usb_download_firmware(struct usb_device *udev, struct dvb_usb_device_pro const struct firmware *fw = NULL; if ((ret = request_firmware(&fw, props->firmware, &udev->dev)) != 0) { - err("did not find the firmware file. (%s) Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)", + err("did not find the firmware file '%s' (status %d). You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware", props->firmware,ret); return ret; } diff --git a/drivers/media/usb/dvb-usb/dvb-usb-init.c b/drivers/media/usb/dvb-usb/dvb-usb-init.c index 84308569e7dc..40ca4eafb137 100644 --- a/drivers/media/usb/dvb-usb/dvb-usb-init.c +++ b/drivers/media/usb/dvb-usb/dvb-usb-init.c @@ -9,7 +9,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "dvb-usb-common.h" diff --git a/drivers/media/usb/dvb-usb/dw2102.c b/drivers/media/usb/dvb-usb/dw2102.c index 346946f35b1a..0d4fdd34a710 100644 --- a/drivers/media/usb/dvb-usb/dw2102.c +++ b/drivers/media/usb/dvb-usb/dw2102.c @@ -11,7 +11,7 @@ * under the terms of the GNU General Public License as published by the * Free Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include <media/dvb-usb-ids.h> #include "dw2102.h" @@ -61,9 +61,7 @@ #define P1100_FIRMWARE "dvb-usb-p1100.fw" #define P7500_FIRMWARE "dvb-usb-p7500.fw" -#define err_str "did not find the firmware file. (%s) " \ - "Please see linux/Documentation/dvb/ for more details " \ - "on firmware-problems." +#define err_str "did not find the firmware file '%s'. You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware" struct dw2102_state { u8 initialized; diff --git a/drivers/media/usb/dvb-usb/friio-fe.c b/drivers/media/usb/dvb-usb/friio-fe.c index b2830c157548..932f262452eb 100644 --- a/drivers/media/usb/dvb-usb/friio-fe.c +++ b/drivers/media/usb/dvb-usb/friio-fe.c @@ -8,7 +8,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include <linux/init.h> #include <linux/string.h> diff --git a/drivers/media/usb/dvb-usb/friio.c b/drivers/media/usb/dvb-usb/friio.c index 16875945e662..fe799a7ad44b 100644 --- a/drivers/media/usb/dvb-usb/friio.c +++ b/drivers/media/usb/dvb-usb/friio.c @@ -8,7 +8,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "friio.h" diff --git a/drivers/media/usb/dvb-usb/friio.h b/drivers/media/usb/dvb-usb/friio.h index 0f461ca10cb9..a53af56d035c 100644 --- a/drivers/media/usb/dvb-usb/friio.h +++ b/drivers/media/usb/dvb-usb/friio.h @@ -8,7 +8,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #ifndef _DVB_USB_FRIIO_H_ #define _DVB_USB_FRIIO_H_ diff --git a/drivers/media/usb/dvb-usb/gp8psk.c b/drivers/media/usb/dvb-usb/gp8psk.c index 334b9fb98112..13e96b0aeb0f 100644 --- a/drivers/media/usb/dvb-usb/gp8psk.c +++ b/drivers/media/usb/dvb-usb/gp8psk.c @@ -12,7 +12,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "gp8psk.h" #include "gp8psk-fe.h" @@ -135,7 +135,7 @@ static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d) u8 *buf; if ((ret = request_firmware(&fw, bcm4500_firmware, &d->udev->dev)) != 0) { - err("did not find the bcm4500 firmware file. (%s) Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)", + err("did not find the bcm4500 firmware file '%s' (status %d). You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware", bcm4500_firmware,ret); return ret; } diff --git a/drivers/media/usb/dvb-usb/gp8psk.h b/drivers/media/usb/dvb-usb/gp8psk.h index d8975b866dee..fd063e385eaf 100644 --- a/drivers/media/usb/dvb-usb/gp8psk.h +++ b/drivers/media/usb/dvb-usb/gp8psk.h @@ -12,7 +12,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #ifndef _DVB_USB_GP8PSK_H_ #define _DVB_USB_GP8PSK_H_ diff --git a/drivers/media/usb/dvb-usb/m920x.c b/drivers/media/usb/dvb-usb/m920x.c index 32081c2ce0da..51b026fa6bfb 100644 --- a/drivers/media/usb/dvb-usb/m920x.c +++ b/drivers/media/usb/dvb-usb/m920x.c @@ -6,7 +6,7 @@ * under the terms of the GNU General Public License as published by the * Free Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "m920x.h" diff --git a/drivers/media/usb/dvb-usb/nova-t-usb2.c b/drivers/media/usb/dvb-usb/nova-t-usb2.c index 1babd3341910..43e0e0fd715b 100644 --- a/drivers/media/usb/dvb-usb/nova-t-usb2.c +++ b/drivers/media/usb/dvb-usb/nova-t-usb2.c @@ -7,7 +7,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "dibusb.h" diff --git a/drivers/media/usb/dvb-usb/opera1.c b/drivers/media/usb/dvb-usb/opera1.c index 946a5ccc8f1a..61a377e2373d 100644 --- a/drivers/media/usb/dvb-usb/opera1.c +++ b/drivers/media/usb/dvb-usb/opera1.c @@ -7,7 +7,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * -* see Documentation/dvb/README.dvb-usb for more information +* see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #define DVB_USB_LOG_PREFIX "opera" @@ -453,7 +453,7 @@ static int opera1_xilinx_load_firmware(struct usb_device *dev, info("start downloading fpga firmware %s",filename); if ((ret = request_firmware(&fw, filename, &dev->dev)) != 0) { - err("did not find the firmware file. (%s) Please see linux/Documentation/dvb/ for more details on firmware-problems.", + err("did not find the firmware file '%s'. You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware", filename); return ret; } else { diff --git a/drivers/media/usb/dvb-usb/ttusb2.c b/drivers/media/usb/dvb-usb/ttusb2.c index 12de89665d60..b4d681151599 100644 --- a/drivers/media/usb/dvb-usb/ttusb2.c +++ b/drivers/media/usb/dvb-usb/ttusb2.c @@ -20,7 +20,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #define DVB_USB_LOG_PREFIX "ttusb2" #include "dvb-usb.h" diff --git a/drivers/media/usb/dvb-usb/ttusb2.h b/drivers/media/usb/dvb-usb/ttusb2.h index 52a63af40896..8b6525e5fb24 100644 --- a/drivers/media/usb/dvb-usb/ttusb2.h +++ b/drivers/media/usb/dvb-usb/ttusb2.h @@ -9,7 +9,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #ifndef _DVB_USB_TTUSB2_H_ #define _DVB_USB_TTUSB2_H_ diff --git a/drivers/media/usb/dvb-usb/umt-010.c b/drivers/media/usb/dvb-usb/umt-010.c index 58ad5b4f856c..920bc67c3bcb 100644 --- a/drivers/media/usb/dvb-usb/umt-010.c +++ b/drivers/media/usb/dvb-usb/umt-010.c @@ -7,7 +7,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "dibusb.h" diff --git a/drivers/media/usb/dvb-usb/vp702x-fe.c b/drivers/media/usb/dvb-usb/vp702x-fe.c index 7ff31baa3682..ae48146e005c 100644 --- a/drivers/media/usb/dvb-usb/vp702x-fe.c +++ b/drivers/media/usb/dvb-usb/vp702x-fe.c @@ -15,7 +15,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information * */ #include "vp702x.h" diff --git a/drivers/media/usb/dvb-usb/vp702x.c b/drivers/media/usb/dvb-usb/vp702x.c index 40de33de90a7..c3529ea59da9 100644 --- a/drivers/media/usb/dvb-usb/vp702x.c +++ b/drivers/media/usb/dvb-usb/vp702x.c @@ -12,7 +12,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "vp702x.h" #include <linux/mutex.h> diff --git a/drivers/media/usb/dvb-usb/vp7045-fe.c b/drivers/media/usb/dvb-usb/vp7045-fe.c index 4520ad9c2014..f86040173b8d 100644 --- a/drivers/media/usb/dvb-usb/vp7045-fe.c +++ b/drivers/media/usb/dvb-usb/vp7045-fe.c @@ -9,7 +9,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information * */ #include "vp7045.h" diff --git a/drivers/media/usb/dvb-usb/vp7045.c b/drivers/media/usb/dvb-usb/vp7045.c index 2527b88beb87..e2c8a8530554 100644 --- a/drivers/media/usb/dvb-usb/vp7045.c +++ b/drivers/media/usb/dvb-usb/vp7045.c @@ -10,7 +10,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #include "vp7045.h" diff --git a/drivers/media/usb/dvb-usb/vp7045.h b/drivers/media/usb/dvb-usb/vp7045.h index 66499932ca76..2fdafd8f8cd6 100644 --- a/drivers/media/usb/dvb-usb/vp7045.h +++ b/drivers/media/usb/dvb-usb/vp7045.h @@ -9,7 +9,7 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * see Documentation/dvb/README.dvb-usb for more information + * see Documentation/media/dvb-drivers/dvb-usb.rst for more information */ #ifndef _DVB_USB_VP7045_H_ #define _DVB_USB_VP7045_H_ diff --git a/drivers/media/usb/gspca/m5602/Kconfig b/drivers/media/usb/gspca/m5602/Kconfig index 5a69016ed75f..13a00399ced9 100644 --- a/drivers/media/usb/gspca/m5602/Kconfig +++ b/drivers/media/usb/gspca/m5602/Kconfig @@ -5,7 +5,5 @@ config USB_M5602 Say Y here if you want support for cameras based on the ALi m5602 connected to various image sensors. - See <file:Documentation/video4linux/m5602.txt> for more info. - To compile this driver as a module, choose M here: the module will be called gspca_m5602. diff --git a/drivers/media/usb/ttusb-dec/Kconfig b/drivers/media/usb/ttusb-dec/Kconfig index 290254ab06db..b205903a3c61 100644 --- a/drivers/media/usb/ttusb-dec/Kconfig +++ b/drivers/media/usb/ttusb-dec/Kconfig @@ -12,9 +12,9 @@ config DVB_TTUSB_DEC an external software decoder to watch TV on your computer. This driver needs external firmware. Please use the commands - "<kerneldir>/Documentation/dvb/get_dvb_firmware dec2000t", - "<kerneldir>/Documentation/dvb/get_dvb_firmware dec2540t", - "<kerneldir>/Documentation/dvb/get_dvb_firmware dec3000s", + "<kerneldir>/scripts/get_dvb_firmware dec2000t", + "<kerneldir>/scripts/get_dvb_firmware dec2540t", + "<kerneldir>/scripts/get_dvb_firmware dec3000s", download/extract them, and then copy them to /usr/lib/hotplug/firmware or /lib/firmware (depending on configuration of firmware hotplug). diff --git a/drivers/media/usb/zr364xx/Kconfig b/drivers/media/usb/zr364xx/Kconfig index 0f585662881d..ac429bca70e8 100644 --- a/drivers/media/usb/zr364xx/Kconfig +++ b/drivers/media/usb/zr364xx/Kconfig @@ -6,7 +6,7 @@ config USB_ZR364XX ---help--- Say Y here if you want to connect this type of camera to your computer's USB port. - See <file:Documentation/video4linux/zr364xx.txt> for more info + See <file:Documentation/media/v4l-drivers/zr364xx.rst> for more info and list of supported cameras. To compile this driver as a module, choose M here: the diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig index 14d287bed33c..1ab613eb5796 100644 --- a/drivers/net/ethernet/intel/Kconfig +++ b/drivers/net/ethernet/intel/Kconfig @@ -33,7 +33,7 @@ config E100 to identify the adapter. More specific information on configuring the driver is in - <file:Documentation/networking/e100.txt>. + <file:Documentation/networking/e100.rst>. To compile this driver as a module, choose M here. The module will be called e100. @@ -49,7 +49,7 @@ config E1000 <http://support.intel.com> More specific information on configuring the driver is in - <file:Documentation/networking/e1000.txt>. + <file:Documentation/networking/e1000.rst>. To compile this driver as a module, choose M here. The module will be called e1000. @@ -94,7 +94,7 @@ config IGB <http://support.intel.com> More specific information on configuring the driver is in - <file:Documentation/networking/e1000.txt>. + <file:Documentation/networking/e1000.rst>. To compile this driver as a module, choose M here. The module will be called igb. @@ -130,7 +130,7 @@ config IGBVF <http://support.intel.com> More specific information on configuring the driver is in - <file:Documentation/networking/e1000.txt>. + <file:Documentation/networking/e1000.rst>. To compile this driver as a module, choose M here. The module will be called igbvf. diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index effb1309682e..21710a7460c8 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -2208,7 +2208,7 @@ static int nvme_init_subsystem(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id) * Verify that the subsystem actually supports multiple * controllers, else bail out. */ - if (!ctrl->opts->discovery_nqn && + if (!(ctrl->opts && ctrl->opts->discovery_nqn) && nvme_active_ctrls(found) && !(id->cmic & (1 << 1))) { dev_err(ctrl->device, "ignoring ctrl due to duplicate subnqn (%s).\n", @@ -3197,40 +3197,28 @@ static void nvme_scan_ns_sequential(struct nvme_ctrl *ctrl, unsigned nn) nvme_remove_invalid_namespaces(ctrl, nn); } -static bool nvme_scan_changed_ns_log(struct nvme_ctrl *ctrl) +static void nvme_clear_changed_ns_log(struct nvme_ctrl *ctrl) { size_t log_size = NVME_MAX_CHANGED_NAMESPACES * sizeof(__le32); __le32 *log; - int error, i; - bool ret = false; + int error; log = kzalloc(log_size, GFP_KERNEL); if (!log) - return false; + return; + /* + * We need to read the log to clear the AEN, but we don't want to rely + * on it for the changed namespace information as userspace could have + * raced with us in reading the log page, which could cause us to miss + * updates. + */ error = nvme_get_log(ctrl, NVME_LOG_CHANGED_NS, log, log_size); - if (error) { + if (error) dev_warn(ctrl->device, "reading changed ns log failed: %d\n", error); - goto out_free_log; - } - - if (log[0] == cpu_to_le32(0xffffffff)) - goto out_free_log; - - for (i = 0; i < NVME_MAX_CHANGED_NAMESPACES; i++) { - u32 nsid = le32_to_cpu(log[i]); - if (nsid == 0) - break; - dev_info(ctrl->device, "rescanning namespace %d.\n", nsid); - nvme_validate_ns(ctrl, nsid); - } - ret = true; - -out_free_log: kfree(log); - return ret; } static void nvme_scan_work(struct work_struct *work) @@ -3246,9 +3234,8 @@ static void nvme_scan_work(struct work_struct *work) WARN_ON_ONCE(!ctrl->tagset); if (test_and_clear_bit(NVME_AER_NOTICE_NS_CHANGED, &ctrl->events)) { - if (nvme_scan_changed_ns_log(ctrl)) - goto out_sort_namespaces; dev_info(ctrl->device, "rescanning namespaces.\n"); + nvme_clear_changed_ns_log(ctrl); } if (nvme_identify_ctrl(ctrl, &id)) @@ -3263,7 +3250,6 @@ static void nvme_scan_work(struct work_struct *work) nvme_scan_ns_sequential(ctrl, nn); out_free_id: kfree(id); -out_sort_namespaces: down_write(&ctrl->namespaces_rwsem); list_sort(NULL, &ctrl->namespaces, ns_cmp); up_write(&ctrl->namespaces_rwsem); @@ -3641,16 +3627,6 @@ void nvme_start_queues(struct nvme_ctrl *ctrl) } EXPORT_SYMBOL_GPL(nvme_start_queues); -int nvme_reinit_tagset(struct nvme_ctrl *ctrl, struct blk_mq_tag_set *set) -{ - if (!ctrl->ops->reinit_request) - return 0; - - return blk_mq_tagset_iter(set, set->driver_data, - ctrl->ops->reinit_request); -} -EXPORT_SYMBOL_GPL(nvme_reinit_tagset); - int __init nvme_core_init(void) { int result = -ENOMEM; diff --git a/drivers/nvme/host/fabrics.c b/drivers/nvme/host/fabrics.c index fa32c1216409..903eb4545e26 100644 --- a/drivers/nvme/host/fabrics.c +++ b/drivers/nvme/host/fabrics.c @@ -536,67 +536,55 @@ static struct nvmf_transport_ops *nvmf_lookup_transport( return NULL; } -blk_status_t nvmf_check_if_ready(struct nvme_ctrl *ctrl, struct request *rq, - bool queue_live, bool is_connected) +/* + * For something we're not in a state to send to the device the default action + * is to busy it and retry it after the controller state is recovered. However, + * anything marked for failfast or nvme multipath is immediately failed. + * + * Note: commands used to initialize the controller will be marked for failfast. + * Note: nvme cli/ioctl commands are marked for failfast. + */ +blk_status_t nvmf_fail_nonready_command(struct request *rq) { - struct nvme_command *cmd = nvme_req(rq)->cmd; + if (!blk_noretry_request(rq) && !(rq->cmd_flags & REQ_NVME_MPATH)) + return BLK_STS_RESOURCE; + nvme_req(rq)->status = NVME_SC_ABORT_REQ; + return BLK_STS_IOERR; +} +EXPORT_SYMBOL_GPL(nvmf_fail_nonready_command); - if (likely(ctrl->state == NVME_CTRL_LIVE && is_connected)) - return BLK_STS_OK; +bool __nvmf_check_ready(struct nvme_ctrl *ctrl, struct request *rq, + bool queue_live) +{ + struct nvme_request *req = nvme_req(rq); + + /* + * If we are in some state of setup or teardown only allow + * internally generated commands. + */ + if (!blk_rq_is_passthrough(rq) || (req->flags & NVME_REQ_USERCMD)) + return false; + /* + * Only allow commands on a live queue, except for the connect command, + * which is require to set the queue live in the appropinquate states. + */ switch (ctrl->state) { case NVME_CTRL_NEW: case NVME_CTRL_CONNECTING: - case NVME_CTRL_DELETING: - /* - * This is the case of starting a new or deleting an association - * but connectivity was lost before it was fully created or torn - * down. We need to error the commands used to initialize the - * controller so the reconnect can go into a retry attempt. The - * commands should all be marked REQ_FAILFAST_DRIVER, which will - * hit the reject path below. Anything else will be queued while - * the state settles. - */ - if (!is_connected) - break; - - /* - * If queue is live, allow only commands that are internally - * generated pass through. These are commands on the admin - * queue to initialize the controller. This will reject any - * ioctl admin cmds received while initializing. - */ - if (queue_live && !(nvme_req(rq)->flags & NVME_REQ_USERCMD)) - return BLK_STS_OK; - - /* - * If the queue is not live, allow only a connect command. This - * will reject any ioctl admin cmd as well as initialization - * commands if the controller reverted the queue to non-live. - */ - if (!queue_live && blk_rq_is_passthrough(rq) && - cmd->common.opcode == nvme_fabrics_command && - cmd->fabrics.fctype == nvme_fabrics_type_connect) - return BLK_STS_OK; + if (req->cmd->common.opcode == nvme_fabrics_command && + req->cmd->fabrics.fctype == nvme_fabrics_type_connect) + return true; break; default: break; + case NVME_CTRL_DEAD: + return false; } - /* - * Any other new io is something we're not in a state to send to the - * device. Default action is to busy it and retry it after the - * controller state is recovered. However, anything marked for failfast - * or nvme multipath is immediately failed. Note: commands used to - * initialize the controller will be marked for failfast. - * Note: nvme cli/ioctl commands are marked for failfast. - */ - if (!blk_noretry_request(rq) && !(rq->cmd_flags & REQ_NVME_MPATH)) - return BLK_STS_RESOURCE; - nvme_req(rq)->status = NVME_SC_ABORT_REQ; - return BLK_STS_IOERR; + return queue_live; } -EXPORT_SYMBOL_GPL(nvmf_check_if_ready); +EXPORT_SYMBOL_GPL(__nvmf_check_ready); static const match_table_t opt_tokens = { { NVMF_OPT_TRANSPORT, "transport=%s" }, diff --git a/drivers/nvme/host/fabrics.h b/drivers/nvme/host/fabrics.h index 7491a0bbf711..e1818a27aa2d 100644 --- a/drivers/nvme/host/fabrics.h +++ b/drivers/nvme/host/fabrics.h @@ -162,7 +162,17 @@ void nvmf_unregister_transport(struct nvmf_transport_ops *ops); void nvmf_free_options(struct nvmf_ctrl_options *opts); int nvmf_get_address(struct nvme_ctrl *ctrl, char *buf, int size); bool nvmf_should_reconnect(struct nvme_ctrl *ctrl); -blk_status_t nvmf_check_if_ready(struct nvme_ctrl *ctrl, - struct request *rq, bool queue_live, bool is_connected); +blk_status_t nvmf_fail_nonready_command(struct request *rq); +bool __nvmf_check_ready(struct nvme_ctrl *ctrl, struct request *rq, + bool queue_live); + +static inline bool nvmf_check_ready(struct nvme_ctrl *ctrl, struct request *rq, + bool queue_live) +{ + if (likely(ctrl->state == NVME_CTRL_LIVE || + ctrl->state == NVME_CTRL_ADMIN_ONLY)) + return true; + return __nvmf_check_ready(ctrl, rq, queue_live); +} #endif /* _NVME_FABRICS_H */ diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c index 0bad65803271..b528a2f5826c 100644 --- a/drivers/nvme/host/fc.c +++ b/drivers/nvme/host/fc.c @@ -142,6 +142,7 @@ struct nvme_fc_ctrl { struct nvme_fc_rport *rport; u32 cnum; + bool ioq_live; bool assoc_active; u64 association_id; @@ -1470,21 +1471,6 @@ nvme_fc_xmt_disconnect_assoc(struct nvme_fc_ctrl *ctrl) static void nvme_fc_error_recovery(struct nvme_fc_ctrl *ctrl, char *errmsg); -static int -nvme_fc_reinit_request(void *data, struct request *rq) -{ - struct nvme_fc_fcp_op *op = blk_mq_rq_to_pdu(rq); - struct nvme_fc_cmd_iu *cmdiu = &op->cmd_iu; - - memset(cmdiu, 0, sizeof(*cmdiu)); - cmdiu->scsi_id = NVME_CMD_SCSI_ID; - cmdiu->fc_id = NVME_CMD_FC_ID; - cmdiu->iu_len = cpu_to_be16(sizeof(*cmdiu) / sizeof(u32)); - memset(&op->rsp_iu, 0, sizeof(op->rsp_iu)); - - return 0; -} - static void __nvme_fc_exit_request(struct nvme_fc_ctrl *ctrl, struct nvme_fc_fcp_op *op) @@ -1893,6 +1879,7 @@ nvme_fc_free_queue(struct nvme_fc_queue *queue) */ queue->connection_id = 0; + atomic_set(&queue->csn, 1); } static void @@ -2279,14 +2266,13 @@ nvme_fc_queue_rq(struct blk_mq_hw_ctx *hctx, struct nvme_fc_cmd_iu *cmdiu = &op->cmd_iu; struct nvme_command *sqe = &cmdiu->sqe; enum nvmefc_fcp_datadir io_dir; + bool queue_ready = test_bit(NVME_FC_Q_LIVE, &queue->flags); u32 data_len; blk_status_t ret; - ret = nvmf_check_if_ready(&queue->ctrl->ctrl, rq, - test_bit(NVME_FC_Q_LIVE, &queue->flags), - ctrl->rport->remoteport.port_state == FC_OBJSTATE_ONLINE); - if (unlikely(ret)) - return ret; + if (ctrl->rport->remoteport.port_state != FC_OBJSTATE_ONLINE || + !nvmf_check_ready(&queue->ctrl->ctrl, rq, queue_ready)) + return nvmf_fail_nonready_command(rq); ret = nvme_setup_cmd(ns, rq, sqe); if (ret) @@ -2463,6 +2449,8 @@ nvme_fc_create_io_queues(struct nvme_fc_ctrl *ctrl) if (ret) goto out_delete_hw_queues; + ctrl->ioq_live = true; + return 0; out_delete_hw_queues: @@ -2480,7 +2468,7 @@ out_free_tag_set: } static int -nvme_fc_reinit_io_queues(struct nvme_fc_ctrl *ctrl) +nvme_fc_recreate_io_queues(struct nvme_fc_ctrl *ctrl) { struct nvmf_ctrl_options *opts = ctrl->ctrl.opts; unsigned int nr_io_queues; @@ -2500,12 +2488,6 @@ nvme_fc_reinit_io_queues(struct nvme_fc_ctrl *ctrl) if (ctrl->ctrl.queue_count == 1) return 0; - nvme_fc_init_io_queues(ctrl); - - ret = nvme_reinit_tagset(&ctrl->ctrl, ctrl->ctrl.tagset); - if (ret) - goto out_free_io_queues; - ret = nvme_fc_create_hw_io_queues(ctrl, ctrl->ctrl.sqsize + 1); if (ret) goto out_free_io_queues; @@ -2603,8 +2585,6 @@ nvme_fc_create_association(struct nvme_fc_ctrl *ctrl) * Create the admin queue */ - nvme_fc_init_queue(ctrl, 0); - ret = __nvme_fc_create_hw_queue(ctrl, &ctrl->queues[0], 0, NVME_AQ_DEPTH); if (ret) @@ -2615,8 +2595,7 @@ nvme_fc_create_association(struct nvme_fc_ctrl *ctrl) if (ret) goto out_delete_hw_queue; - if (ctrl->ctrl.state != NVME_CTRL_NEW) - blk_mq_unquiesce_queue(ctrl->ctrl.admin_q); + blk_mq_unquiesce_queue(ctrl->ctrl.admin_q); ret = nvmf_connect_admin_queue(&ctrl->ctrl); if (ret) @@ -2689,10 +2668,10 @@ nvme_fc_create_association(struct nvme_fc_ctrl *ctrl) */ if (ctrl->ctrl.queue_count > 1) { - if (ctrl->ctrl.state == NVME_CTRL_NEW) + if (!ctrl->ioq_live) ret = nvme_fc_create_io_queues(ctrl); else - ret = nvme_fc_reinit_io_queues(ctrl); + ret = nvme_fc_recreate_io_queues(ctrl); if (ret) goto out_term_aen_ops; } @@ -2776,8 +2755,7 @@ nvme_fc_delete_association(struct nvme_fc_ctrl *ctrl) * use blk_mq_tagset_busy_itr() and the transport routine to * terminate the exchanges. */ - if (ctrl->ctrl.state != NVME_CTRL_NEW) - blk_mq_quiesce_queue(ctrl->ctrl.admin_q); + blk_mq_quiesce_queue(ctrl->ctrl.admin_q); blk_mq_tagset_busy_iter(&ctrl->admin_tag_set, nvme_fc_terminate_exchange, &ctrl->ctrl); @@ -2917,7 +2895,6 @@ static const struct nvme_ctrl_ops nvme_fc_ctrl_ops = { .submit_async_event = nvme_fc_submit_async_event, .delete_ctrl = nvme_fc_delete_ctrl, .get_address = nvmf_get_address, - .reinit_request = nvme_fc_reinit_request, }; static void @@ -2934,7 +2911,7 @@ nvme_fc_connect_ctrl_work(struct work_struct *work) nvme_fc_reconnect_or_delete(ctrl, ret); else dev_info(ctrl->ctrl.device, - "NVME-FC{%d}: controller reconnect complete\n", + "NVME-FC{%d}: controller connect complete\n", ctrl->cnum); } @@ -2982,7 +2959,7 @@ nvme_fc_init_ctrl(struct device *dev, struct nvmf_ctrl_options *opts, { struct nvme_fc_ctrl *ctrl; unsigned long flags; - int ret, idx, retry; + int ret, idx; if (!(rport->remoteport.port_role & (FC_PORT_ROLE_NVME_DISCOVERY | FC_PORT_ROLE_NVME_TARGET))) { @@ -3009,11 +2986,13 @@ nvme_fc_init_ctrl(struct device *dev, struct nvmf_ctrl_options *opts, } ctrl->ctrl.opts = opts; + ctrl->ctrl.nr_reconnects = 0; INIT_LIST_HEAD(&ctrl->ctrl_list); ctrl->lport = lport; ctrl->rport = rport; ctrl->dev = lport->dev; ctrl->cnum = idx; + ctrl->ioq_live = false; ctrl->assoc_active = false; init_waitqueue_head(&ctrl->ioabort_wait); @@ -3032,6 +3011,7 @@ nvme_fc_init_ctrl(struct device *dev, struct nvmf_ctrl_options *opts, ctrl->ctrl.sqsize = opts->queue_size - 1; ctrl->ctrl.kato = opts->kato; + ctrl->ctrl.cntlid = 0xffff; ret = -ENOMEM; ctrl->queues = kcalloc(ctrl->ctrl.queue_count, @@ -3039,6 +3019,8 @@ nvme_fc_init_ctrl(struct device *dev, struct nvmf_ctrl_options *opts, if (!ctrl->queues) goto out_free_ida; + nvme_fc_init_queue(ctrl, 0); + memset(&ctrl->admin_tag_set, 0, sizeof(ctrl->admin_tag_set)); ctrl->admin_tag_set.ops = &nvme_fc_admin_mq_ops; ctrl->admin_tag_set.queue_depth = NVME_AQ_MQ_TAG_DEPTH; @@ -3081,62 +3063,24 @@ nvme_fc_init_ctrl(struct device *dev, struct nvmf_ctrl_options *opts, list_add_tail(&ctrl->ctrl_list, &rport->ctrl_list); spin_unlock_irqrestore(&rport->lock, flags); - /* - * It's possible that transactions used to create the association - * may fail. Examples: CreateAssociation LS or CreateIOConnection - * LS gets dropped/corrupted/fails; or a frame gets dropped or a - * command times out for one of the actions to init the controller - * (Connect, Get/Set_Property, Set_Features, etc). Many of these - * transport errors (frame drop, LS failure) inherently must kill - * the association. The transport is coded so that any command used - * to create the association (prior to a LIVE state transition - * while NEW or CONNECTING) will fail if it completes in error or - * times out. - * - * As such: as the connect request was mostly likely due to a - * udev event that discovered the remote port, meaning there is - * not an admin or script there to restart if the connect - * request fails, retry the initial connection creation up to - * three times before giving up and declaring failure. - */ - for (retry = 0; retry < 3; retry++) { - ret = nvme_fc_create_association(ctrl); - if (!ret) - break; - } - - if (ret) { - nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_DELETING); - cancel_work_sync(&ctrl->ctrl.reset_work); - cancel_delayed_work_sync(&ctrl->connect_work); - - /* couldn't schedule retry - fail out */ + if (!nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_RESETTING) || + !nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_CONNECTING)) { dev_err(ctrl->ctrl.device, - "NVME-FC{%d}: Connect retry failed\n", ctrl->cnum); - - ctrl->ctrl.opts = NULL; + "NVME-FC{%d}: failed to init ctrl state\n", ctrl->cnum); + goto fail_ctrl; + } - /* initiate nvme ctrl ref counting teardown */ - nvme_uninit_ctrl(&ctrl->ctrl); + nvme_get_ctrl(&ctrl->ctrl); - /* Remove core ctrl ref. */ + if (!queue_delayed_work(nvme_wq, &ctrl->connect_work, 0)) { nvme_put_ctrl(&ctrl->ctrl); - - /* as we're past the point where we transition to the ref - * counting teardown path, if we return a bad pointer here, - * the calling routine, thinking it's prior to the - * transition, will do an rport put. Since the teardown - * path also does a rport put, we do an extra get here to - * so proper order/teardown happens. - */ - nvme_fc_rport_get(rport); - - if (ret > 0) - ret = -EIO; - return ERR_PTR(ret); + dev_err(ctrl->ctrl.device, + "NVME-FC{%d}: failed to schedule initial connect\n", + ctrl->cnum); + goto fail_ctrl; } - nvme_get_ctrl(&ctrl->ctrl); + flush_delayed_work(&ctrl->connect_work); dev_info(ctrl->ctrl.device, "NVME-FC{%d}: new ctrl: NQN \"%s\"\n", @@ -3144,6 +3088,30 @@ nvme_fc_init_ctrl(struct device *dev, struct nvmf_ctrl_options *opts, return &ctrl->ctrl; +fail_ctrl: + nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_DELETING); + cancel_work_sync(&ctrl->ctrl.reset_work); + cancel_delayed_work_sync(&ctrl->connect_work); + + ctrl->ctrl.opts = NULL; + + /* initiate nvme ctrl ref counting teardown */ + nvme_uninit_ctrl(&ctrl->ctrl); + + /* Remove core ctrl ref. */ + nvme_put_ctrl(&ctrl->ctrl); + + /* as we're past the point where we transition to the ref + * counting teardown path, if we return a bad pointer here, + * the calling routine, thinking it's prior to the + * transition, will do an rport put. Since the teardown + * path also does a rport put, we do an extra get here to + * so proper order/teardown happens. + */ + nvme_fc_rport_get(rport); + + return ERR_PTR(-EIO); + out_cleanup_admin_q: blk_cleanup_queue(ctrl->ctrl.admin_q); out_free_admin_tag_set: diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c index d7b664ae5923..1ffd3e8b13a1 100644 --- a/drivers/nvme/host/multipath.c +++ b/drivers/nvme/host/multipath.c @@ -12,6 +12,7 @@ */ #include <linux/moduleparam.h> +#include <trace/events/block.h> #include "nvme.h" static bool multipath = true; @@ -111,6 +112,9 @@ static blk_qc_t nvme_ns_head_make_request(struct request_queue *q, if (likely(ns)) { bio->bi_disk = ns->disk; bio->bi_opf |= REQ_NVME_MPATH; + trace_block_bio_remap(bio->bi_disk->queue, bio, + disk_devt(ns->head->disk), + bio->bi_iter.bi_sector); ret = direct_make_request(bio); } else if (!list_empty_careful(&head->list)) { dev_warn_ratelimited(dev, "no path available - requeuing I/O\n"); diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h index 34df07d44f80..231807cbc849 100644 --- a/drivers/nvme/host/nvme.h +++ b/drivers/nvme/host/nvme.h @@ -321,7 +321,6 @@ struct nvme_ctrl_ops { void (*submit_async_event)(struct nvme_ctrl *ctrl); void (*delete_ctrl)(struct nvme_ctrl *ctrl); int (*get_address)(struct nvme_ctrl *ctrl, char *buf, int size); - int (*reinit_request)(void *data, struct request *rq); void (*stop_ctrl)(struct nvme_ctrl *ctrl); }; @@ -416,7 +415,6 @@ void nvme_unfreeze(struct nvme_ctrl *ctrl); void nvme_wait_freeze(struct nvme_ctrl *ctrl); void nvme_wait_freeze_timeout(struct nvme_ctrl *ctrl, long timeout); void nvme_start_freeze(struct nvme_ctrl *ctrl); -int nvme_reinit_tagset(struct nvme_ctrl *ctrl, struct blk_mq_tag_set *set); #define NVME_QID_ANY -1 struct request *nvme_alloc_request(struct request_queue *q, diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index 2aba03876d84..c9424da0d23e 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -1189,21 +1189,38 @@ static int nvme_rdma_map_data(struct nvme_rdma_queue *queue, count = ib_dma_map_sg(ibdev, req->sg_table.sgl, req->nents, rq_data_dir(rq) == WRITE ? DMA_TO_DEVICE : DMA_FROM_DEVICE); if (unlikely(count <= 0)) { - sg_free_table_chained(&req->sg_table, true); - return -EIO; + ret = -EIO; + goto out_free_table; } if (count == 1) { if (rq_data_dir(rq) == WRITE && nvme_rdma_queue_idx(queue) && blk_rq_payload_bytes(rq) <= - nvme_rdma_inline_data_size(queue)) - return nvme_rdma_map_sg_inline(queue, req, c); + nvme_rdma_inline_data_size(queue)) { + ret = nvme_rdma_map_sg_inline(queue, req, c); + goto out; + } - if (dev->pd->flags & IB_PD_UNSAFE_GLOBAL_RKEY) - return nvme_rdma_map_sg_single(queue, req, c); + if (dev->pd->flags & IB_PD_UNSAFE_GLOBAL_RKEY) { + ret = nvme_rdma_map_sg_single(queue, req, c); + goto out; + } } - return nvme_rdma_map_sg_fr(queue, req, c, count); + ret = nvme_rdma_map_sg_fr(queue, req, c, count); +out: + if (unlikely(ret)) + goto out_unmap_sg; + + return 0; + +out_unmap_sg: + ib_dma_unmap_sg(ibdev, req->sg_table.sgl, + req->nents, rq_data_dir(rq) == + WRITE ? DMA_TO_DEVICE : DMA_FROM_DEVICE); +out_free_table: + sg_free_table_chained(&req->sg_table, true); + return ret; } static void nvme_rdma_send_done(struct ib_cq *cq, struct ib_wc *wc) @@ -1613,15 +1630,14 @@ static blk_status_t nvme_rdma_queue_rq(struct blk_mq_hw_ctx *hctx, struct nvme_rdma_qe *sqe = &req->sqe; struct nvme_command *c = sqe->data; struct ib_device *dev; + bool queue_ready = test_bit(NVME_RDMA_Q_LIVE, &queue->flags); blk_status_t ret; int err; WARN_ON_ONCE(rq->tag < 0); - ret = nvmf_check_if_ready(&queue->ctrl->ctrl, rq, - test_bit(NVME_RDMA_Q_LIVE, &queue->flags), true); - if (unlikely(ret)) - return ret; + if (!nvmf_check_ready(&queue->ctrl->ctrl, rq, queue_ready)) + return nvmf_fail_nonready_command(rq); dev = queue->device->dev; ib_dma_sync_single_for_cpu(dev, sqe->dma, diff --git a/drivers/nvme/target/admin-cmd.c b/drivers/nvme/target/admin-cmd.c index 962532842769..38803576d5e1 100644 --- a/drivers/nvme/target/admin-cmd.c +++ b/drivers/nvme/target/admin-cmd.c @@ -119,9 +119,11 @@ static void nvmet_execute_get_log_page_smart(struct nvmet_req *req) else status = nvmet_get_smart_log_nsid(req, log); if (status) - goto out; + goto out_free_log; status = nvmet_copy_to_sgl(req, 0, log, sizeof(*log)); +out_free_log: + kfree(log); out: nvmet_req_complete(req, status); } diff --git a/drivers/nvme/target/loop.c b/drivers/nvme/target/loop.c index 1304ec3a7ede..d8d91f04bd7e 100644 --- a/drivers/nvme/target/loop.c +++ b/drivers/nvme/target/loop.c @@ -158,12 +158,11 @@ static blk_status_t nvme_loop_queue_rq(struct blk_mq_hw_ctx *hctx, struct nvme_loop_queue *queue = hctx->driver_data; struct request *req = bd->rq; struct nvme_loop_iod *iod = blk_mq_rq_to_pdu(req); + bool queue_ready = test_bit(NVME_LOOP_Q_LIVE, &queue->flags); blk_status_t ret; - ret = nvmf_check_if_ready(&queue->ctrl->ctrl, req, - test_bit(NVME_LOOP_Q_LIVE, &queue->flags), true); - if (unlikely(ret)) - return ret; + if (!nvmf_check_ready(&queue->ctrl->ctrl, req, queue_ready)) + return nvmf_fail_nonready_command(req); ret = nvme_setup_cmd(ns, req, &iod->cmd); if (ret) diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig index 44333bd8f908..a97f4eada60b 100644 --- a/drivers/parport/Kconfig +++ b/drivers/parport/Kconfig @@ -20,7 +20,7 @@ menuconfig PARPORT drive, PLIP link (Parallel Line Internet Protocol is mainly used to create a mini network by connecting the parallel ports of two local machines) etc., then you need to say Y here; please read - <file:Documentation/parport.txt> and + <file:Documentation/admin-guide/parport.rst> and <file:drivers/parport/BUGS-parport>. For extensive information about drivers for many devices attaching @@ -33,7 +33,7 @@ menuconfig PARPORT the module will be called parport. If you have more than one parallel port and want to specify which port and IRQ to be used by this driver at module load time, take a - look at <file:Documentation/parport.txt>. + look at <file:Documentation/admin-guide/parport.rst>. If unsure, say Y. @@ -71,7 +71,7 @@ config PARPORT_PC_FIFO As well as actually having a FIFO, or DMA capability, the kernel will need to know which IRQ the parallel port has. By default, parallel port interrupts will not be used, and so neither will the - FIFO. See <file:Documentation/parport.txt> to find out how to + FIFO. See <file:Documentation/admin-guide/parport.rst> to find out how to specify which IRQ/DMA to use. config PARPORT_PC_SUPERIO diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index f27cb186437d..ac4d48830415 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -1052,7 +1052,7 @@ config SAMSUNG_LAPTOP function keys, wireless LED, LCD backlight level. It may also provide some sysfs files described in - <file:Documentation/ABI/testing/sysfs-platform-samsung-laptop> + <file:Documentation/ABI/testing/sysfs-driver-samsung-laptop> To compile this driver as a module, choose M here: the module will be called samsung-laptop. diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 73cce3ecb97f..d3a38c421503 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -1222,80 +1222,37 @@ static void dasd_hosts_init(struct dentry *base_dentry, device->hosts_dentry = pde; } -/* - * Allocate memory for a channel program with 'cplength' channel - * command words and 'datasize' additional space. There are two - * variantes: 1) dasd_kmalloc_request uses kmalloc to get the needed - * memory and 2) dasd_smalloc_request uses the static ccw memory - * that gets allocated for each device. - */ -struct dasd_ccw_req *dasd_kmalloc_request(int magic, int cplength, - int datasize, - struct dasd_device *device) -{ - struct dasd_ccw_req *cqr; - - /* Sanity checks */ - BUG_ON(datasize > PAGE_SIZE || - (cplength*sizeof(struct ccw1)) > PAGE_SIZE); - - cqr = kzalloc(sizeof(struct dasd_ccw_req), GFP_ATOMIC); - if (cqr == NULL) - return ERR_PTR(-ENOMEM); - cqr->cpaddr = NULL; - if (cplength > 0) { - cqr->cpaddr = kcalloc(cplength, sizeof(struct ccw1), - GFP_ATOMIC | GFP_DMA); - if (cqr->cpaddr == NULL) { - kfree(cqr); - return ERR_PTR(-ENOMEM); - } - } - cqr->data = NULL; - if (datasize > 0) { - cqr->data = kzalloc(datasize, GFP_ATOMIC | GFP_DMA); - if (cqr->data == NULL) { - kfree(cqr->cpaddr); - kfree(cqr); - return ERR_PTR(-ENOMEM); - } - } - cqr->magic = magic; - set_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags); - dasd_get_device(device); - return cqr; -} -EXPORT_SYMBOL(dasd_kmalloc_request); - -struct dasd_ccw_req *dasd_smalloc_request(int magic, int cplength, - int datasize, - struct dasd_device *device) +struct dasd_ccw_req *dasd_smalloc_request(int magic, int cplength, int datasize, + struct dasd_device *device, + struct dasd_ccw_req *cqr) { unsigned long flags; - struct dasd_ccw_req *cqr; - char *data; - int size; + char *data, *chunk; + int size = 0; - size = (sizeof(struct dasd_ccw_req) + 7L) & -8L; if (cplength > 0) size += cplength * sizeof(struct ccw1); if (datasize > 0) size += datasize; + if (!cqr) + size += (sizeof(*cqr) + 7L) & -8L; + spin_lock_irqsave(&device->mem_lock, flags); - cqr = (struct dasd_ccw_req *) - dasd_alloc_chunk(&device->ccw_chunks, size); + data = chunk = dasd_alloc_chunk(&device->ccw_chunks, size); spin_unlock_irqrestore(&device->mem_lock, flags); - if (cqr == NULL) + if (!chunk) return ERR_PTR(-ENOMEM); - memset(cqr, 0, sizeof(struct dasd_ccw_req)); - data = (char *) cqr + ((sizeof(struct dasd_ccw_req) + 7L) & -8L); - cqr->cpaddr = NULL; + if (!cqr) { + cqr = (void *) data; + data += (sizeof(*cqr) + 7L) & -8L; + } + memset(cqr, 0, sizeof(*cqr)); + cqr->mem_chunk = chunk; if (cplength > 0) { - cqr->cpaddr = (struct ccw1 *) data; - data += cplength*sizeof(struct ccw1); - memset(cqr->cpaddr, 0, cplength*sizeof(struct ccw1)); + cqr->cpaddr = data; + data += cplength * sizeof(struct ccw1); + memset(cqr->cpaddr, 0, cplength * sizeof(struct ccw1)); } - cqr->data = NULL; if (datasize > 0) { cqr->data = data; memset(cqr->data, 0, datasize); @@ -1307,33 +1264,12 @@ struct dasd_ccw_req *dasd_smalloc_request(int magic, int cplength, } EXPORT_SYMBOL(dasd_smalloc_request); -/* - * Free memory of a channel program. This function needs to free all the - * idal lists that might have been created by dasd_set_cda and the - * struct dasd_ccw_req itself. - */ -void dasd_kfree_request(struct dasd_ccw_req *cqr, struct dasd_device *device) -{ - struct ccw1 *ccw; - - /* Clear any idals used for the request. */ - ccw = cqr->cpaddr; - do { - clear_normalized_cda(ccw); - } while (ccw++->flags & (CCW_FLAG_CC | CCW_FLAG_DC)); - kfree(cqr->cpaddr); - kfree(cqr->data); - kfree(cqr); - dasd_put_device(device); -} -EXPORT_SYMBOL(dasd_kfree_request); - void dasd_sfree_request(struct dasd_ccw_req *cqr, struct dasd_device *device) { unsigned long flags; spin_lock_irqsave(&device->mem_lock, flags); - dasd_free_chunk(&device->ccw_chunks, cqr); + dasd_free_chunk(&device->ccw_chunks, cqr->mem_chunk); spin_unlock_irqrestore(&device->mem_lock, flags); dasd_put_device(device); } @@ -1885,6 +1821,33 @@ static void __dasd_device_process_ccw_queue(struct dasd_device *device, } } +static void __dasd_process_cqr(struct dasd_device *device, + struct dasd_ccw_req *cqr) +{ + char errorstring[ERRORLENGTH]; + + switch (cqr->status) { + case DASD_CQR_SUCCESS: + cqr->status = DASD_CQR_DONE; + break; + case DASD_CQR_ERROR: + cqr->status = DASD_CQR_NEED_ERP; + break; + case DASD_CQR_CLEARED: + cqr->status = DASD_CQR_TERMINATED; + break; + default: + /* internal error 12 - wrong cqr status*/ + snprintf(errorstring, ERRORLENGTH, "12 %p %x02", cqr, cqr->status); + dev_err(&device->cdev->dev, + "An error occurred in the DASD device driver, " + "reason=%s\n", errorstring); + BUG(); + } + if (cqr->callback) + cqr->callback(cqr, cqr->callback_data); +} + /* * the cqrs from the final queue are returned to the upper layer * by setting a dasd_block state and calling the callback function @@ -1895,40 +1858,18 @@ static void __dasd_device_process_final_queue(struct dasd_device *device, struct list_head *l, *n; struct dasd_ccw_req *cqr; struct dasd_block *block; - void (*callback)(struct dasd_ccw_req *, void *data); - void *callback_data; - char errorstring[ERRORLENGTH]; list_for_each_safe(l, n, final_queue) { cqr = list_entry(l, struct dasd_ccw_req, devlist); list_del_init(&cqr->devlist); block = cqr->block; - callback = cqr->callback; - callback_data = cqr->callback_data; - if (block) + if (!block) { + __dasd_process_cqr(device, cqr); + } else { spin_lock_bh(&block->queue_lock); - switch (cqr->status) { - case DASD_CQR_SUCCESS: - cqr->status = DASD_CQR_DONE; - break; - case DASD_CQR_ERROR: - cqr->status = DASD_CQR_NEED_ERP; - break; - case DASD_CQR_CLEARED: - cqr->status = DASD_CQR_TERMINATED; - break; - default: - /* internal error 12 - wrong cqr status*/ - snprintf(errorstring, ERRORLENGTH, "12 %p %x02", cqr, cqr->status); - dev_err(&device->cdev->dev, - "An error occurred in the DASD device driver, " - "reason=%s\n", errorstring); - BUG(); - } - if (cqr->callback != NULL) - (callback)(cqr, callback_data); - if (block) + __dasd_process_cqr(device, cqr); spin_unlock_bh(&block->queue_lock); + } } } @@ -3041,7 +2982,6 @@ static blk_status_t do_dasd_request(struct blk_mq_hw_ctx *hctx, cqr->callback_data = req; cqr->status = DASD_CQR_FILLED; cqr->dq = dq; - *((struct dasd_ccw_req **) blk_mq_rq_to_pdu(req)) = cqr; blk_mq_start_request(req); spin_lock(&block->queue_lock); @@ -3072,7 +3012,7 @@ enum blk_eh_timer_return dasd_times_out(struct request *req, bool reserved) unsigned long flags; int rc = 0; - cqr = *((struct dasd_ccw_req **) blk_mq_rq_to_pdu(req)); + cqr = blk_mq_rq_to_pdu(req); if (!cqr) return BLK_EH_DONE; @@ -3174,7 +3114,7 @@ static int dasd_alloc_queue(struct dasd_block *block) int rc; block->tag_set.ops = &dasd_mq_ops; - block->tag_set.cmd_size = sizeof(struct dasd_ccw_req *); + block->tag_set.cmd_size = sizeof(struct dasd_ccw_req); block->tag_set.nr_hw_queues = DASD_NR_HW_QUEUES; block->tag_set.queue_depth = DASD_MAX_LCU_DEV * DASD_REQ_PER_DEV; block->tag_set.flags = BLK_MQ_F_SHOULD_MERGE; @@ -4038,7 +3978,8 @@ static struct dasd_ccw_req *dasd_generic_build_rdc(struct dasd_device *device, struct ccw1 *ccw; unsigned long *idaw; - cqr = dasd_smalloc_request(magic, 1 /* RDC */, rdc_buffer_size, device); + cqr = dasd_smalloc_request(magic, 1 /* RDC */, rdc_buffer_size, device, + NULL); if (IS_ERR(cqr)) { /* internal error 13 - Allocating the RDC request failed*/ diff --git a/drivers/s390/block/dasd_alias.c b/drivers/s390/block/dasd_alias.c index 5e963fe0e38d..e36a114354fc 100644 --- a/drivers/s390/block/dasd_alias.c +++ b/drivers/s390/block/dasd_alias.c @@ -407,9 +407,9 @@ static int read_unit_address_configuration(struct dasd_device *device, int rc; unsigned long flags; - cqr = dasd_kmalloc_request(DASD_ECKD_MAGIC, 1 /* PSF */ + 1 /* RSSD */, + cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1 /* PSF */ + 1 /* RSSD */, (sizeof(struct dasd_psf_prssd_data)), - device); + device, NULL); if (IS_ERR(cqr)) return PTR_ERR(cqr); cqr->startdev = device; @@ -457,7 +457,7 @@ static int read_unit_address_configuration(struct dasd_device *device, lcu->flags |= NEED_UAC_UPDATE; spin_unlock_irqrestore(&lcu->lock, flags); } - dasd_kfree_request(cqr, cqr->memdev); + dasd_sfree_request(cqr, cqr->memdev); return rc; } diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c index 131f1989f6f3..e1fe02477ea8 100644 --- a/drivers/s390/block/dasd_diag.c +++ b/drivers/s390/block/dasd_diag.c @@ -536,7 +536,8 @@ static struct dasd_ccw_req *dasd_diag_build_cp(struct dasd_device *memdev, /* Build the request */ datasize = sizeof(struct dasd_diag_req) + count*sizeof(struct dasd_diag_bio); - cqr = dasd_smalloc_request(DASD_DIAG_MAGIC, 0, datasize, memdev); + cqr = dasd_smalloc_request(DASD_DIAG_MAGIC, 0, datasize, memdev, + blk_mq_rq_to_pdu(req)); if (IS_ERR(cqr)) return cqr; diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index be208e7adcb4..bbf95b78ef5d 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -886,7 +886,7 @@ static int dasd_eckd_read_conf_lpm(struct dasd_device *device, } cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1 /* RCD */, 0, /* use rcd_buf as data ara */ - device); + device, NULL); if (IS_ERR(cqr)) { DBF_DEV_EVENT(DBF_WARNING, device, "%s", "Could not allocate RCD request"); @@ -1442,7 +1442,7 @@ static int dasd_eckd_read_features(struct dasd_device *device) cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1 /* PSF */ + 1 /* RSSD */, (sizeof(struct dasd_psf_prssd_data) + sizeof(struct dasd_rssd_features)), - device); + device, NULL); if (IS_ERR(cqr)) { DBF_EVENT_DEVID(DBF_WARNING, device->cdev, "%s", "Could not " "allocate initialization request"); @@ -1504,7 +1504,7 @@ static struct dasd_ccw_req *dasd_eckd_build_psf_ssc(struct dasd_device *device, cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1 /* PSF */ , sizeof(struct dasd_psf_ssc_data), - device); + device, NULL); if (IS_ERR(cqr)) { DBF_DEV_EVENT(DBF_WARNING, device, "%s", @@ -1815,7 +1815,8 @@ dasd_eckd_analysis_ccw(struct dasd_device *device) cplength = 8; datasize = sizeof(struct DE_eckd_data) + 2*sizeof(struct LO_eckd_data); - cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, cplength, datasize, device); + cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, cplength, datasize, device, + NULL); if (IS_ERR(cqr)) return cqr; ccw = cqr->cpaddr; @@ -2092,7 +2093,8 @@ dasd_eckd_build_check_tcw(struct dasd_device *base, struct format_data_t *fdata, */ itcw_size = itcw_calc_size(0, count, 0); - cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 0, itcw_size, startdev); + cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 0, itcw_size, startdev, + NULL); if (IS_ERR(cqr)) return cqr; @@ -2186,7 +2188,7 @@ dasd_eckd_build_check(struct dasd_device *base, struct format_data_t *fdata, cplength += count; cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, cplength, datasize, - startdev); + startdev, NULL); if (IS_ERR(cqr)) return cqr; @@ -2332,7 +2334,7 @@ dasd_eckd_build_format(struct dasd_device *base, } /* Allocate the format ccw request. */ fcp = dasd_smalloc_request(DASD_ECKD_MAGIC, cplength, - datasize, startdev); + datasize, startdev, NULL); if (IS_ERR(fcp)) return fcp; @@ -3103,7 +3105,7 @@ static struct dasd_ccw_req *dasd_eckd_build_cp_cmd_single( } /* Allocate the ccw request. */ cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, cplength, datasize, - startdev); + startdev, blk_mq_rq_to_pdu(req)); if (IS_ERR(cqr)) return cqr; ccw = cqr->cpaddr; @@ -3262,7 +3264,7 @@ static struct dasd_ccw_req *dasd_eckd_build_cp_cmd_track( /* Allocate the ccw request. */ cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, cplength, datasize, - startdev); + startdev, blk_mq_rq_to_pdu(req)); if (IS_ERR(cqr)) return cqr; ccw = cqr->cpaddr; @@ -3595,7 +3597,8 @@ static struct dasd_ccw_req *dasd_eckd_build_cp_tpm_track( /* Allocate the ccw request. */ itcw_size = itcw_calc_size(0, ctidaw, 0); - cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 0, itcw_size, startdev); + cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 0, itcw_size, startdev, + blk_mq_rq_to_pdu(req)); if (IS_ERR(cqr)) return cqr; @@ -3862,7 +3865,7 @@ static struct dasd_ccw_req *dasd_eckd_build_cp_raw(struct dasd_device *startdev, /* Allocate the ccw request. */ cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, cplength, - datasize, startdev); + datasize, startdev, blk_mq_rq_to_pdu(req)); if (IS_ERR(cqr)) return cqr; @@ -4102,7 +4105,7 @@ dasd_eckd_release(struct dasd_device *device) return -EACCES; useglobal = 0; - cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1, 32, device); + cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1, 32, device, NULL); if (IS_ERR(cqr)) { mutex_lock(&dasd_reserve_mutex); useglobal = 1; @@ -4157,7 +4160,7 @@ dasd_eckd_reserve(struct dasd_device *device) return -EACCES; useglobal = 0; - cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1, 32, device); + cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1, 32, device, NULL); if (IS_ERR(cqr)) { mutex_lock(&dasd_reserve_mutex); useglobal = 1; @@ -4211,7 +4214,7 @@ dasd_eckd_steal_lock(struct dasd_device *device) return -EACCES; useglobal = 0; - cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1, 32, device); + cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1, 32, device, NULL); if (IS_ERR(cqr)) { mutex_lock(&dasd_reserve_mutex); useglobal = 1; @@ -4271,7 +4274,8 @@ static int dasd_eckd_snid(struct dasd_device *device, useglobal = 0; cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1, - sizeof(struct dasd_snid_data), device); + sizeof(struct dasd_snid_data), device, + NULL); if (IS_ERR(cqr)) { mutex_lock(&dasd_reserve_mutex); useglobal = 1; @@ -4331,7 +4335,7 @@ dasd_eckd_performance(struct dasd_device *device, void __user *argp) cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1 /* PSF */ + 1 /* RSSD */, (sizeof(struct dasd_psf_prssd_data) + sizeof(struct dasd_rssd_perf_stats_t)), - device); + device, NULL); if (IS_ERR(cqr)) { DBF_DEV_EVENT(DBF_WARNING, device, "%s", "Could not allocate initialization request"); @@ -4477,7 +4481,7 @@ static int dasd_symm_io(struct dasd_device *device, void __user *argp) psf1 = psf_data[1]; /* setup CCWs for PSF + RSSD */ - cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 2 , 0, device); + cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 2, 0, device, NULL); if (IS_ERR(cqr)) { DBF_DEV_EVENT(DBF_WARNING, device, "%s", "Could not allocate initialization request"); @@ -5037,7 +5041,7 @@ static int dasd_eckd_read_message_buffer(struct dasd_device *device, cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1 /* PSF */ + 1 /* RSSD */, (sizeof(struct dasd_psf_prssd_data) + sizeof(struct dasd_rssd_messages)), - device); + device, NULL); if (IS_ERR(cqr)) { DBF_EVENT_DEVID(DBF_WARNING, device->cdev, "%s", "Could not allocate read message buffer request"); @@ -5126,7 +5130,7 @@ static int dasd_eckd_query_host_access(struct dasd_device *device, cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1 /* PSF */ + 1 /* RSSD */, sizeof(struct dasd_psf_prssd_data) + 1, - device); + device, NULL); if (IS_ERR(cqr)) { DBF_EVENT_DEVID(DBF_WARNING, device->cdev, "%s", "Could not allocate read message buffer request"); @@ -5284,8 +5288,8 @@ dasd_eckd_psf_cuir_response(struct dasd_device *device, int response, int rc; cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1 /* PSF */ , - sizeof(struct dasd_psf_cuir_response), - device); + sizeof(struct dasd_psf_cuir_response), + device, NULL); if (IS_ERR(cqr)) { DBF_DEV_EVENT(DBF_WARNING, device, "%s", diff --git a/drivers/s390/block/dasd_eer.c b/drivers/s390/block/dasd_eer.c index 0af8c5295b65..6ef8714dc693 100644 --- a/drivers/s390/block/dasd_eer.c +++ b/drivers/s390/block/dasd_eer.c @@ -447,7 +447,7 @@ static void dasd_eer_snss_cb(struct dasd_ccw_req *cqr, void *data) * is a new ccw in device->eer_cqr. Free the "old" * snss request now. */ - dasd_kfree_request(cqr, device); + dasd_sfree_request(cqr, device); } /* @@ -472,8 +472,8 @@ int dasd_eer_enable(struct dasd_device *device) if (rc) goto out; - cqr = dasd_kmalloc_request(DASD_ECKD_MAGIC, 1 /* SNSS */, - SNSS_DATA_SIZE, device); + cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1 /* SNSS */, + SNSS_DATA_SIZE, device, NULL); if (IS_ERR(cqr)) { rc = -ENOMEM; cqr = NULL; @@ -505,7 +505,7 @@ out: spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags); if (cqr) - dasd_kfree_request(cqr, device); + dasd_sfree_request(cqr, device); return rc; } @@ -528,7 +528,7 @@ void dasd_eer_disable(struct dasd_device *device) in_use = test_and_clear_bit(DASD_FLAG_EER_IN_USE, &device->flags); spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags); if (cqr && !in_use) - dasd_kfree_request(cqr, device); + dasd_sfree_request(cqr, device); } /* diff --git a/drivers/s390/block/dasd_fba.c b/drivers/s390/block/dasd_fba.c index a6b132f7e869..56007a3e7f11 100644 --- a/drivers/s390/block/dasd_fba.c +++ b/drivers/s390/block/dasd_fba.c @@ -356,7 +356,8 @@ static struct dasd_ccw_req *dasd_fba_build_cp_discard( datasize = sizeof(struct DE_fba_data) + nr_ccws * (sizeof(struct LO_fba_data) + sizeof(struct ccw1)); - cqr = dasd_smalloc_request(DASD_FBA_MAGIC, cplength, datasize, memdev); + cqr = dasd_smalloc_request(DASD_FBA_MAGIC, cplength, datasize, memdev, + blk_mq_rq_to_pdu(req)); if (IS_ERR(cqr)) return cqr; @@ -490,7 +491,8 @@ static struct dasd_ccw_req *dasd_fba_build_cp_regular( datasize += (count - 1)*sizeof(struct LO_fba_data); } /* Allocate the ccw request. */ - cqr = dasd_smalloc_request(DASD_FBA_MAGIC, cplength, datasize, memdev); + cqr = dasd_smalloc_request(DASD_FBA_MAGIC, cplength, datasize, memdev, + blk_mq_rq_to_pdu(req)); if (IS_ERR(cqr)) return cqr; ccw = cqr->cpaddr; diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h index 96709b1a7bf8..976b6bd4fb05 100644 --- a/drivers/s390/block/dasd_int.h +++ b/drivers/s390/block/dasd_int.h @@ -158,40 +158,33 @@ do { \ struct dasd_ccw_req { unsigned int magic; /* Eye catcher */ + int intrc; /* internal error, e.g. from start_IO */ struct list_head devlist; /* for dasd_device request queue */ struct list_head blocklist; /* for dasd_block request queue */ - - /* Where to execute what... */ struct dasd_block *block; /* the originating block device */ struct dasd_device *memdev; /* the device used to allocate this */ struct dasd_device *startdev; /* device the request is started on */ struct dasd_device *basedev; /* base device if no block->base */ void *cpaddr; /* address of ccw or tcw */ + short retries; /* A retry counter */ unsigned char cpmode; /* 0 = cmd mode, 1 = itcw */ char status; /* status of this request */ - short retries; /* A retry counter */ + char lpm; /* logical path mask */ unsigned long flags; /* flags of this request */ struct dasd_queue *dq; - - /* ... and how */ unsigned long starttime; /* jiffies time of request start */ unsigned long expires; /* expiration period in jiffies */ - char lpm; /* logical path mask */ void *data; /* pointer to data area */ - - /* these are important for recovering erroneous requests */ - int intrc; /* internal error, e.g. from start_IO */ struct irb irb; /* device status in case of an error */ struct dasd_ccw_req *refers; /* ERP-chain queueing. */ void *function; /* originating ERP action */ + void *mem_chunk; - /* these are for statistics only */ unsigned long buildclk; /* TOD-clock of request generation */ unsigned long startclk; /* TOD-clock of request start */ unsigned long stopclk; /* TOD-clock of request interrupt */ unsigned long endclk; /* TOD-clock of request termination */ - /* Callback that is called after reaching final status. */ void (*callback)(struct dasd_ccw_req *, void *data); void *callback_data; }; @@ -714,19 +707,10 @@ extern const struct block_device_operations dasd_device_operations; extern struct kmem_cache *dasd_page_cache; struct dasd_ccw_req * -dasd_kmalloc_request(int , int, int, struct dasd_device *); -struct dasd_ccw_req * -dasd_smalloc_request(int , int, int, struct dasd_device *); -void dasd_kfree_request(struct dasd_ccw_req *, struct dasd_device *); +dasd_smalloc_request(int, int, int, struct dasd_device *, struct dasd_ccw_req *); void dasd_sfree_request(struct dasd_ccw_req *, struct dasd_device *); void dasd_wakeup_cb(struct dasd_ccw_req *, void *); -static inline int -dasd_kmalloc_set_cda(struct ccw1 *ccw, void *cda, struct dasd_device *device) -{ - return set_normalized_cda(ccw, cda); -} - struct dasd_device *dasd_alloc_device(void); void dasd_free_device(struct dasd_device *); diff --git a/drivers/s390/cio/Makefile b/drivers/s390/cio/Makefile index a070ef0efe65..f230516abb96 100644 --- a/drivers/s390/cio/Makefile +++ b/drivers/s390/cio/Makefile @@ -5,6 +5,7 @@ # The following is required for define_trace.h to find ./trace.h CFLAGS_trace.o := -I$(src) +CFLAGS_vfio_ccw_fsm.o := -I$(src) obj-y += airq.o blacklist.o chsc.o cio.o css.o chp.o idset.o isc.o \ fcx.o itcw.o crw.o ccwreq.o trace.o ioasm.o diff --git a/drivers/s390/cio/vfio_ccw_cp.c b/drivers/s390/cio/vfio_ccw_cp.c index dce92b2a895d..dbe7c7ac9ac8 100644 --- a/drivers/s390/cio/vfio_ccw_cp.c +++ b/drivers/s390/cio/vfio_ccw_cp.c @@ -23,9 +23,13 @@ #define CCWCHAIN_LEN_MAX 256 struct pfn_array { + /* Starting guest physical I/O address. */ unsigned long pa_iova; + /* Array that stores PFNs of the pages need to pin. */ unsigned long *pa_iova_pfn; + /* Array that receives PFNs of the pages pinned. */ unsigned long *pa_pfn; + /* Number of pages pinned from @pa_iova. */ int pa_nr; }; @@ -46,70 +50,33 @@ struct ccwchain { }; /* - * pfn_array_pin() - pin user pages in memory + * pfn_array_alloc_pin() - alloc memory for PFNs, then pin user pages in memory * @pa: pfn_array on which to perform the operation * @mdev: the mediated device to perform pin/unpin operations + * @iova: target guest physical address + * @len: number of bytes that should be pinned from @iova * - * Attempt to pin user pages in memory. + * Attempt to allocate memory for PFNs, and pin user pages in memory. * * Usage of pfn_array: - * @pa->pa_iova starting guest physical I/O address. Assigned by caller. - * @pa->pa_iova_pfn array that stores PFNs of the pages need to pin. Allocated - * by caller. - * @pa->pa_pfn array that receives PFNs of the pages pinned. Allocated by - * caller. - * @pa->pa_nr number of pages from @pa->pa_iova to pin. Assigned by - * caller. - * number of pages pinned. Assigned by callee. + * We expect (pa_nr == 0) and (pa_iova_pfn == NULL), any field in + * this structure will be filled in by this function. * * Returns: * Number of pages pinned on success. - * If @pa->pa_nr is 0 or negative, returns 0. + * If @pa->pa_nr is not 0, or @pa->pa_iova_pfn is not NULL initially, + * returns -EINVAL. * If no pages were pinned, returns -errno. */ -static int pfn_array_pin(struct pfn_array *pa, struct device *mdev) -{ - int i, ret; - - if (pa->pa_nr <= 0) { - pa->pa_nr = 0; - return 0; - } - - pa->pa_iova_pfn[0] = pa->pa_iova >> PAGE_SHIFT; - for (i = 1; i < pa->pa_nr; i++) - pa->pa_iova_pfn[i] = pa->pa_iova_pfn[i - 1] + 1; - - ret = vfio_pin_pages(mdev, pa->pa_iova_pfn, pa->pa_nr, - IOMMU_READ | IOMMU_WRITE, pa->pa_pfn); - - if (ret > 0 && ret != pa->pa_nr) { - vfio_unpin_pages(mdev, pa->pa_iova_pfn, ret); - pa->pa_nr = 0; - return 0; - } - - return ret; -} - -/* Unpin the pages before releasing the memory. */ -static void pfn_array_unpin_free(struct pfn_array *pa, struct device *mdev) -{ - vfio_unpin_pages(mdev, pa->pa_iova_pfn, pa->pa_nr); - pa->pa_nr = 0; - kfree(pa->pa_iova_pfn); -} - -/* Alloc memory for PFNs, then pin pages with them. */ static int pfn_array_alloc_pin(struct pfn_array *pa, struct device *mdev, u64 iova, unsigned int len) { - int ret = 0; + int i, ret = 0; if (!len) return 0; - if (pa->pa_nr) + if (pa->pa_nr || pa->pa_iova_pfn) return -EINVAL; pa->pa_iova = iova; @@ -126,18 +93,39 @@ static int pfn_array_alloc_pin(struct pfn_array *pa, struct device *mdev, return -ENOMEM; pa->pa_pfn = pa->pa_iova_pfn + pa->pa_nr; - ret = pfn_array_pin(pa, mdev); + pa->pa_iova_pfn[0] = pa->pa_iova >> PAGE_SHIFT; + for (i = 1; i < pa->pa_nr; i++) + pa->pa_iova_pfn[i] = pa->pa_iova_pfn[i - 1] + 1; - if (ret > 0) - return ret; - else if (!ret) + ret = vfio_pin_pages(mdev, pa->pa_iova_pfn, pa->pa_nr, + IOMMU_READ | IOMMU_WRITE, pa->pa_pfn); + + if (ret < 0) { + goto err_out; + } else if (ret > 0 && ret != pa->pa_nr) { + vfio_unpin_pages(mdev, pa->pa_iova_pfn, ret); ret = -EINVAL; + goto err_out; + } + return ret; + +err_out: + pa->pa_nr = 0; kfree(pa->pa_iova_pfn); + pa->pa_iova_pfn = NULL; return ret; } +/* Unpin the pages before releasing the memory. */ +static void pfn_array_unpin_free(struct pfn_array *pa, struct device *mdev) +{ + vfio_unpin_pages(mdev, pa->pa_iova_pfn, pa->pa_nr); + pa->pa_nr = 0; + kfree(pa->pa_iova_pfn); +} + static int pfn_array_table_init(struct pfn_array_table *pat, int nr) { pat->pat_pa = kcalloc(nr, sizeof(*pat->pat_pa), GFP_KERNEL); @@ -365,6 +353,9 @@ static void cp_unpin_free(struct channel_program *cp) * This is the chain length not considering any TICs. * You need to do a new round for each TIC target. * + * The program is also validated for absence of not yet supported + * indirect data addressing scenarios. + * * Returns: the length of the ccw chain or -errno. */ static int ccwchain_calc_length(u64 iova, struct channel_program *cp) @@ -391,6 +382,14 @@ static int ccwchain_calc_length(u64 iova, struct channel_program *cp) do { cnt++; + /* + * As we don't want to fail direct addressing even if the + * orb specified one of the unsupported formats, we defer + * checking for IDAWs in unsupported formats to here. + */ + if ((!cp->orb.cmd.c64 || cp->orb.cmd.i2k) && ccw_is_idal(ccw)) + return -EOPNOTSUPP; + if ((!ccw_is_chain(ccw)) && (!ccw_is_tic(ccw))) break; @@ -503,7 +502,7 @@ static int ccwchain_fetch_direct(struct ccwchain *chain, struct ccw1 *ccw; struct pfn_array_table *pat; unsigned long *idaws; - int idaw_nr; + int ret; ccw = chain->ch_ccw + idx; @@ -523,18 +522,19 @@ static int ccwchain_fetch_direct(struct ccwchain *chain, * needed when translating a direct ccw to a idal ccw. */ pat = chain->ch_pat + idx; - if (pfn_array_table_init(pat, 1)) - return -ENOMEM; - idaw_nr = pfn_array_alloc_pin(pat->pat_pa, cp->mdev, - ccw->cda, ccw->count); - if (idaw_nr < 0) - return idaw_nr; + ret = pfn_array_table_init(pat, 1); + if (ret) + goto out_init; + + ret = pfn_array_alloc_pin(pat->pat_pa, cp->mdev, ccw->cda, ccw->count); + if (ret < 0) + goto out_init; /* Translate this direct ccw to a idal ccw. */ - idaws = kcalloc(idaw_nr, sizeof(*idaws), GFP_DMA | GFP_KERNEL); + idaws = kcalloc(ret, sizeof(*idaws), GFP_DMA | GFP_KERNEL); if (!idaws) { - pfn_array_table_unpin_free(pat, cp->mdev); - return -ENOMEM; + ret = -ENOMEM; + goto out_unpin; } ccw->cda = (__u32) virt_to_phys(idaws); ccw->flags |= CCW_FLAG_IDA; @@ -542,6 +542,12 @@ static int ccwchain_fetch_direct(struct ccwchain *chain, pfn_array_table_idal_create_words(pat, idaws); return 0; + +out_unpin: + pfn_array_table_unpin_free(pat, cp->mdev); +out_init: + ccw->cda = 0; + return ret; } static int ccwchain_fetch_idal(struct ccwchain *chain, @@ -571,7 +577,7 @@ static int ccwchain_fetch_idal(struct ccwchain *chain, pat = chain->ch_pat + idx; ret = pfn_array_table_init(pat, idaw_nr); if (ret) - return ret; + goto out_init; /* Translate idal ccw to use new allocated idaws. */ idaws = kzalloc(idaw_len, GFP_DMA | GFP_KERNEL); @@ -603,6 +609,8 @@ out_free_idaws: kfree(idaws); out_unpin: pfn_array_table_unpin_free(pat, cp->mdev); +out_init: + ccw->cda = 0; return ret; } @@ -656,10 +664,8 @@ int cp_init(struct channel_program *cp, struct device *mdev, union orb *orb) /* * XXX: * Only support prefetch enable mode now. - * Only support 64bit addressing idal. - * Only support 4k IDAW. */ - if (!orb->cmd.pfch || !orb->cmd.c64 || orb->cmd.i2k) + if (!orb->cmd.pfch) return -EOPNOTSUPP; INIT_LIST_HEAD(&cp->ccwchain_list); @@ -688,6 +694,10 @@ int cp_init(struct channel_program *cp, struct device *mdev, union orb *orb) ret = ccwchain_loop_tic(chain, cp); if (ret) cp_unpin_free(cp); + /* It is safe to force: if not set but idals used + * ccwchain_calc_length returns an error. + */ + cp->orb.cmd.c64 = 1; return ret; } diff --git a/drivers/s390/cio/vfio_ccw_drv.c b/drivers/s390/cio/vfio_ccw_drv.c index ea6a2d0b2894..770fa9cfc310 100644 --- a/drivers/s390/cio/vfio_ccw_drv.c +++ b/drivers/s390/cio/vfio_ccw_drv.c @@ -177,6 +177,7 @@ static int vfio_ccw_sch_event(struct subchannel *sch, int process) { struct vfio_ccw_private *private = dev_get_drvdata(&sch->dev); unsigned long flags; + int rc = -EAGAIN; spin_lock_irqsave(sch->lock, flags); if (!device_is_registered(&sch->dev)) @@ -187,6 +188,7 @@ static int vfio_ccw_sch_event(struct subchannel *sch, int process) if (cio_update_schib(sch)) { vfio_ccw_fsm_event(private, VFIO_CCW_EVENT_NOT_OPER); + rc = 0; goto out_unlock; } @@ -195,11 +197,12 @@ static int vfio_ccw_sch_event(struct subchannel *sch, int process) private->state = private->mdev ? VFIO_CCW_STATE_IDLE : VFIO_CCW_STATE_STANDBY; } + rc = 0; out_unlock: spin_unlock_irqrestore(sch->lock, flags); - return 0; + return rc; } static struct css_device_id vfio_ccw_sch_ids[] = { diff --git a/drivers/s390/cio/vfio_ccw_fsm.c b/drivers/s390/cio/vfio_ccw_fsm.c index 3c800642134e..797a82731159 100644 --- a/drivers/s390/cio/vfio_ccw_fsm.c +++ b/drivers/s390/cio/vfio_ccw_fsm.c @@ -13,6 +13,9 @@ #include "ioasm.h" #include "vfio_ccw_private.h" +#define CREATE_TRACE_POINTS +#include "vfio_ccw_trace.h" + static int fsm_io_helper(struct vfio_ccw_private *private) { struct subchannel *sch; @@ -110,6 +113,10 @@ static void fsm_disabled_irq(struct vfio_ccw_private *private, */ cio_disable_subchannel(sch); } +inline struct subchannel_id get_schid(struct vfio_ccw_private *p) +{ + return p->sch->schid; +} /* * Deal with the ccw command request from the userspace. @@ -121,6 +128,7 @@ static void fsm_io_request(struct vfio_ccw_private *private, union scsw *scsw = &private->scsw; struct ccw_io_region *io_region = &private->io_region; struct mdev_device *mdev = private->mdev; + char *errstr = "request"; private->state = VFIO_CCW_STATE_BOXED; @@ -132,15 +140,19 @@ static void fsm_io_request(struct vfio_ccw_private *private, /* Don't try to build a cp if transport mode is specified. */ if (orb->tm.b) { io_region->ret_code = -EOPNOTSUPP; + errstr = "transport mode"; goto err_out; } io_region->ret_code = cp_init(&private->cp, mdev_dev(mdev), orb); - if (io_region->ret_code) + if (io_region->ret_code) { + errstr = "cp init"; goto err_out; + } io_region->ret_code = cp_prefetch(&private->cp); if (io_region->ret_code) { + errstr = "cp prefetch"; cp_free(&private->cp); goto err_out; } @@ -148,6 +160,7 @@ static void fsm_io_request(struct vfio_ccw_private *private, /* Start channel program and wait for I/O interrupt. */ io_region->ret_code = fsm_io_helper(private); if (io_region->ret_code) { + errstr = "cp fsm_io_helper"; cp_free(&private->cp); goto err_out; } @@ -164,6 +177,8 @@ static void fsm_io_request(struct vfio_ccw_private *private, err_out: private->state = VFIO_CCW_STATE_IDLE; + trace_vfio_ccw_io_fctl(scsw->cmd.fctl, get_schid(private), + io_region->ret_code, errstr); } /* diff --git a/drivers/s390/cio/vfio_ccw_trace.h b/drivers/s390/cio/vfio_ccw_trace.h new file mode 100644 index 000000000000..b1da53ddec1f --- /dev/null +++ b/drivers/s390/cio/vfio_ccw_trace.h @@ -0,0 +1,54 @@ +/* SPDX-License-Identifier: GPL-2.0 + * Tracepoints for vfio_ccw driver + * + * Copyright IBM Corp. 2018 + * + * Author(s): Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> + * Halil Pasic <pasic@linux.vnet.ibm.com> + */ + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM vfio_ccw + +#if !defined(_VFIO_CCW_TRACE_) || defined(TRACE_HEADER_MULTI_READ) +#define _VFIO_CCW_TRACE_ + +#include <linux/tracepoint.h> + +TRACE_EVENT(vfio_ccw_io_fctl, + TP_PROTO(int fctl, struct subchannel_id schid, int errno, char *errstr), + TP_ARGS(fctl, schid, errno, errstr), + + TP_STRUCT__entry( + __field(int, fctl) + __field_struct(struct subchannel_id, schid) + __field(int, errno) + __field(char*, errstr) + ), + + TP_fast_assign( + __entry->fctl = fctl; + __entry->schid = schid; + __entry->errno = errno; + __entry->errstr = errstr; + ), + + TP_printk("schid=%x.%x.%04x fctl=%x errno=%d info=%s", + __entry->schid.cssid, + __entry->schid.ssid, + __entry->schid.sch_no, + __entry->fctl, + __entry->errno, + __entry->errstr) +); + +#endif /* _VFIO_CCW_TRACE_ */ + +/* This part must be outside protection */ + +#undef TRACE_INCLUDE_PATH +#define TRACE_INCLUDE_PATH . +#undef TRACE_INCLUDE_FILE +#define TRACE_INCLUDE_FILE vfio_ccw_trace + +#include <trace/define_trace.h> diff --git a/drivers/sbus/char/oradax.c b/drivers/sbus/char/oradax.c index 1754f55e2fac..524f9ea62e52 100644 --- a/drivers/sbus/char/oradax.c +++ b/drivers/sbus/char/oradax.c @@ -30,7 +30,7 @@ * the recommended way for applications to use the coprocessor, and * the driver interface is not intended for general use. * - * See Documentation/sparc/oradax/oracle_dax.txt for more details. + * See Documentation/sparc/oradax/oracle-dax.txt for more details. */ #include <linux/uaccess.h> diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c index 8974a0fcda1b..4b5e250e8615 100644 --- a/drivers/soundwire/stream.c +++ b/drivers/soundwire/stream.c @@ -1291,7 +1291,7 @@ restore_params: * * @stream: Soundwire stream * - * Documentation/soundwire/stream.txt explains this API in detail + * Documentation/driver-api/soundwire/stream.rst explains this API in detail */ int sdw_prepare_stream(struct sdw_stream_runtime *stream) { @@ -1348,7 +1348,7 @@ static int _sdw_enable_stream(struct sdw_stream_runtime *stream) * * @stream: Soundwire stream * - * Documentation/soundwire/stream.txt explains this API in detail + * Documentation/driver-api/soundwire/stream.rst explains this API in detail */ int sdw_enable_stream(struct sdw_stream_runtime *stream) { @@ -1400,7 +1400,7 @@ static int _sdw_disable_stream(struct sdw_stream_runtime *stream) * * @stream: Soundwire stream * - * Documentation/soundwire/stream.txt explains this API in detail + * Documentation/driver-api/soundwire/stream.rst explains this API in detail */ int sdw_disable_stream(struct sdw_stream_runtime *stream) { @@ -1456,7 +1456,7 @@ static int _sdw_deprepare_stream(struct sdw_stream_runtime *stream) * * @stream: Soundwire stream * - * Documentation/soundwire/stream.txt explains this API in detail + * Documentation/driver-api/soundwire/stream.rst explains this API in detail */ int sdw_deprepare_stream(struct sdw_stream_runtime *stream) { diff --git a/drivers/staging/fsl-mc/bus/dpio/dpio-driver.txt b/drivers/staging/fsl-mc/bus/dpio/dpio-driver.txt index 0ba6771654f7..72ba9da3d179 100644 --- a/drivers/staging/fsl-mc/bus/dpio/dpio-driver.txt +++ b/drivers/staging/fsl-mc/bus/dpio/dpio-driver.txt @@ -11,7 +11,7 @@ pool management for network interfaces. This document provides an overview the Linux DPIO driver, its subcomponents, and its APIs. -See Documentation/dpaa2/overview.txt for a general overview of DPAA2 +See Documentation/networking/dpaa2/overview.rst for a general overview of DPAA2 and the general DPAA2 driver architecture in Linux. Driver Overview diff --git a/drivers/staging/media/bcm2048/TODO b/drivers/staging/media/bcm2048/TODO index 051f85dbe89e..6bee2a2dad68 100644 --- a/drivers/staging/media/bcm2048/TODO +++ b/drivers/staging/media/bcm2048/TODO @@ -3,7 +3,7 @@ TODO: From the initial code review: The main thing you need to do is to implement all the controls using the -control framework (see Documentation/video4linux/v4l2-controls.txt). +control framework (see Documentation/media/kapi/v4l2-controls.rst). Most drivers are by now converted to the control framework, so you will find many examples of how to do this in drivers/media/radio. diff --git a/drivers/staging/media/zoran/Kconfig b/drivers/staging/media/zoran/Kconfig index 63df5de5068d..34a18135ede0 100644 --- a/drivers/staging/media/zoran/Kconfig +++ b/drivers/staging/media/zoran/Kconfig @@ -7,7 +7,7 @@ config VIDEO_ZORAN 36057/36067 PCI controller chipset. This includes the Iomega Buz, Pinnacle DC10+ and the Linux Media Labs LML33. There is a driver homepage at <http://mjpeg.sf.net/driver-zoran/>. For - more information, check <file:Documentation/video4linux/Zoran>. + more information, check <file:Documentation/media/v4l-drivers/zoran.rst>. To compile this driver as a module, choose M here: the module will be called zr36067. diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig index d94254263ea5..591a13a59787 100644 --- a/drivers/video/fbdev/Kconfig +++ b/drivers/video/fbdev/Kconfig @@ -1437,7 +1437,7 @@ config FB_SIS_315 config FB_VIA tristate "VIA UniChrome (Pro) and Chrome9 display support" - depends on FB && PCI && X86 && GPIOLIB && I2C + depends on FB && PCI && GPIOLIB && I2C && (X86 || COMPILE_TEST) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -1888,7 +1888,6 @@ config FB_W100 config FB_SH_MOBILE_LCDC tristate "SuperH Mobile LCDC framebuffer support" depends on FB && (SUPERH || ARCH_RENESAS) && HAVE_CLK - depends on FB_SH_MOBILE_MERAM || !FB_SH_MOBILE_MERAM select FB_SYS_FILLRECT select FB_SYS_COPYAREA select FB_SYS_IMAGEBLIT @@ -2253,39 +2252,6 @@ config FB_BROADSHEET and could also have been called by other names when coupled with a bridge adapter. -config FB_AUO_K190X - tristate "AUO-K190X EPD controller support" - depends on FB - select FB_SYS_FILLRECT - select FB_SYS_COPYAREA - select FB_SYS_IMAGEBLIT - select FB_SYS_FOPS - select FB_DEFERRED_IO - help - Provides support for epaper controllers from the K190X series - of AUO. These controllers can be used to drive epaper displays - from Sipix. - - This option enables the common support, shared by the individual - controller drivers. You will also have to enable the driver - for the controller type used in your device. - -config FB_AUO_K1900 - tristate "AUO-K1900 EPD controller support" - depends on FB && FB_AUO_K190X - help - This driver implements support for the AUO K1900 epd-controller. - This controller can drive Sipix epaper displays but can only do - serial updates, reducing the number of possible frames per second. - -config FB_AUO_K1901 - tristate "AUO-K1901 EPD controller support" - depends on FB && FB_AUO_K190X - help - This driver implements support for the AUO K1901 epd-controller. - This controller can drive Sipix epaper displays and supports - concurrent updates, making higher frames per second possible. - config FB_JZ4740 tristate "JZ4740 LCD framebuffer support" depends on FB && MACH_JZ4740 @@ -2346,18 +2312,6 @@ source "drivers/video/fbdev/omap/Kconfig" source "drivers/video/fbdev/omap2/Kconfig" source "drivers/video/fbdev/mmp/Kconfig" -config FB_SH_MOBILE_MERAM - tristate "SuperH Mobile MERAM read ahead support" - depends on (SUPERH || ARCH_SHMOBILE) - select GENERIC_ALLOCATOR - ---help--- - Enable MERAM support for the SuperH controller. - - This will allow for caching of the framebuffer to provide more - reliable access under heavy main memory bus traffic situations. - Up to 4 memory channels can be configured, allowing 4 RGB or - 2 YCbCr framebuffers to be configured. - config FB_SSD1307 tristate "Solomon SSD1307 framebuffer support" depends on FB && I2C diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile index 55282a21b500..13c900320c2c 100644 --- a/drivers/video/fbdev/Makefile +++ b/drivers/video/fbdev/Makefile @@ -100,9 +100,6 @@ obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o obj-$(CONFIG_FB_MAXINE) += maxinefb.o obj-$(CONFIG_FB_METRONOME) += metronomefb.o obj-$(CONFIG_FB_BROADSHEET) += broadsheetfb.o -obj-$(CONFIG_FB_AUO_K190X) += auo_k190x.o -obj-$(CONFIG_FB_AUO_K1900) += auo_k1900fb.o -obj-$(CONFIG_FB_AUO_K1901) += auo_k1901fb.o obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o obj-$(CONFIG_FB_SH7760) += sh7760fb.o obj-$(CONFIG_FB_IMX) += imxfb.o @@ -116,7 +113,6 @@ obj-$(CONFIG_FB_SM501) += sm501fb.o obj-$(CONFIG_FB_UDL) += udlfb.o obj-$(CONFIG_FB_SMSCUFX) += smscufx.o obj-$(CONFIG_FB_XILINX) += xilinxfb.o -obj-$(CONFIG_FB_SH_MOBILE_MERAM) += sh_mobile_meram.o obj-$(CONFIG_FB_SH_MOBILE_LCDC) += sh_mobile_lcdcfb.o obj-$(CONFIG_FB_OMAP) += omap/ obj-y += omap2/ diff --git a/drivers/video/fbdev/aty/aty128fb.c b/drivers/video/fbdev/aty/aty128fb.c index 09b0e558dce8..6cc46867ff57 100644 --- a/drivers/video/fbdev/aty/aty128fb.c +++ b/drivers/video/fbdev/aty/aty128fb.c @@ -2442,7 +2442,7 @@ static void aty128_set_suspend(struct aty128fb_par *par, int suspend) (void)aty_ld_pll(POWER_MANAGEMENT); aty_st_le32(BUS_CNTL1, 0x00000010); aty_st_le32(MEM_POWER_MISC, 0x0c830000); - mdelay(100); + msleep(100); /* Switch PCI power management to D2 */ pci_set_power_state(pdev, PCI_D2); diff --git a/drivers/video/fbdev/aty/radeon_pm.c b/drivers/video/fbdev/aty/radeon_pm.c index 7137c12cbcee..e695adb0e573 100644 --- a/drivers/video/fbdev/aty/radeon_pm.c +++ b/drivers/video/fbdev/aty/radeon_pm.c @@ -2678,17 +2678,17 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) * it, we'll restore the dynamic clocks state on wakeup */ radeon_pm_disable_dynamic_mode(rinfo); - mdelay(50); + msleep(50); radeon_pm_save_regs(rinfo, 1); if (rinfo->is_mobility && !(rinfo->pm_mode & radeon_pm_d2)) { /* Switch off LVDS interface */ - mdelay(1); + usleep_range(1000, 2000); OUTREG(LVDS_GEN_CNTL, INREG(LVDS_GEN_CNTL) & ~(LVDS_BL_MOD_EN)); - mdelay(1); + usleep_range(1000, 2000); OUTREG(LVDS_GEN_CNTL, INREG(LVDS_GEN_CNTL) & ~(LVDS_EN | LVDS_ON)); OUTREG(LVDS_PLL_CNTL, (INREG(LVDS_PLL_CNTL) & ~30000) | 0x20000); - mdelay(20); + msleep(20); OUTREG(LVDS_GEN_CNTL, INREG(LVDS_GEN_CNTL) & ~(LVDS_DIGON)); } pci_disable_device(pdev); diff --git a/drivers/video/fbdev/au1100fb.c b/drivers/video/fbdev/au1100fb.c index d555a78df5c6..0adf0683cf08 100644 --- a/drivers/video/fbdev/au1100fb.c +++ b/drivers/video/fbdev/au1100fb.c @@ -464,7 +464,7 @@ static int au1100fb_drv_probe(struct platform_device *dev) PAGE_ALIGN(fbdev->fb_len), &fbdev->fb_phys, GFP_KERNEL); if (!fbdev->fb_mem) { - print_err("fail to allocate frambuffer (size: %dK))", + print_err("fail to allocate framebuffer (size: %dK))", fbdev->fb_len / 1024); return -ENOMEM; } diff --git a/drivers/video/fbdev/au1200fb.c b/drivers/video/fbdev/au1200fb.c index 87d5a62bf6ca..3872ccef4cb2 100644 --- a/drivers/video/fbdev/au1200fb.c +++ b/drivers/video/fbdev/au1200fb.c @@ -1696,7 +1696,7 @@ static int au1200fb_drv_probe(struct platform_device *dev) &fbdev->fb_phys, GFP_KERNEL, DMA_ATTR_NON_CONSISTENT); if (!fbdev->fb_mem) { - print_err("fail to allocate frambuffer (size: %dK))", + print_err("fail to allocate framebuffer (size: %dK))", fbdev->fb_len / 1024); ret = -ENOMEM; goto failed; diff --git a/drivers/video/fbdev/auo_k1900fb.c b/drivers/video/fbdev/auo_k1900fb.c deleted file mode 100644 index 7637c60eae3d..000000000000 --- a/drivers/video/fbdev/auo_k1900fb.c +++ /dev/null @@ -1,204 +0,0 @@ -/* - * auok190xfb.c -- FB driver for AUO-K1900 controllers - * - * Copyright (C) 2011, 2012 Heiko Stuebner <heiko@sntech.de> - * - * based on broadsheetfb.c - * - * Copyright (C) 2008, Jaya Kumar - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven. - * - * This driver is written to be used with the AUO-K1900 display controller. - * - * It is intended to be architecture independent. A board specific driver - * must be used to perform all the physical IO interactions. - * - * The controller supports different update modes: - * mode0+1 16 step gray (4bit) - * mode2 4 step gray (2bit) - FIXME: add strange refresh - * mode3 2 step gray (1bit) - FIXME: add strange refresh - * mode4 handwriting mode (strange behaviour) - * mode5 automatic selection of update mode - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/fb.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/list.h> -#include <linux/firmware.h> -#include <linux/gpio.h> -#include <linux/pm_runtime.h> - -#include <video/auo_k190xfb.h> - -#include "auo_k190x.h" - -/* - * AUO-K1900 specific commands - */ - -#define AUOK1900_CMD_PARTIALDISP 0x1001 -#define AUOK1900_CMD_ROTATION 0x1006 -#define AUOK1900_CMD_LUT_STOP 0x1009 - -#define AUOK1900_INIT_TEMP_AVERAGE (1 << 13) -#define AUOK1900_INIT_ROTATE(_x) ((_x & 0x3) << 10) -#define AUOK1900_INIT_RESOLUTION(_res) ((_res & 0x7) << 2) - -static void auok1900_init(struct auok190xfb_par *par) -{ - struct device *dev = par->info->device; - struct auok190x_board *board = par->board; - u16 init_param = 0; - - pm_runtime_get_sync(dev); - - init_param |= AUOK1900_INIT_TEMP_AVERAGE; - init_param |= AUOK1900_INIT_ROTATE(par->rotation); - init_param |= AUOK190X_INIT_INVERSE_WHITE; - init_param |= AUOK190X_INIT_FORMAT0; - init_param |= AUOK1900_INIT_RESOLUTION(par->resolution); - init_param |= AUOK190X_INIT_SHIFT_RIGHT; - - auok190x_send_cmdargs(par, AUOK190X_CMD_INIT, 1, &init_param); - - /* let the controller finish */ - board->wait_for_rdy(par); - - pm_runtime_mark_last_busy(dev); - pm_runtime_put_autosuspend(dev); -} - -static void auok1900_update_region(struct auok190xfb_par *par, int mode, - u16 y1, u16 y2) -{ - struct device *dev = par->info->device; - unsigned char *buf = (unsigned char *)par->info->screen_base; - int xres = par->info->var.xres; - int line_length = par->info->fix.line_length; - u16 args[4]; - - pm_runtime_get_sync(dev); - - mutex_lock(&(par->io_lock)); - - /* y1 and y2 must be a multiple of 2 so drop the lowest bit */ - y1 &= 0xfffe; - y2 &= 0xfffe; - - dev_dbg(dev, "update (x,y,w,h,mode)=(%d,%d,%d,%d,%d)\n", - 1, y1+1, xres, y2-y1, mode); - - /* to FIX handle different partial update modes */ - args[0] = mode | 1; - args[1] = y1 + 1; - args[2] = xres; - args[3] = y2 - y1; - buf += y1 * line_length; - auok190x_send_cmdargs_pixels(par, AUOK1900_CMD_PARTIALDISP, 4, args, - ((y2 - y1) * line_length)/2, (u16 *) buf); - auok190x_send_command(par, AUOK190X_CMD_DATA_STOP); - - par->update_cnt++; - - mutex_unlock(&(par->io_lock)); - - pm_runtime_mark_last_busy(dev); - pm_runtime_put_autosuspend(dev); -} - -static void auok1900fb_dpy_update_pages(struct auok190xfb_par *par, - u16 y1, u16 y2) -{ - int mode; - - if (par->update_mode < 0) { - mode = AUOK190X_UPDATE_MODE(1); - par->last_mode = -1; - } else { - mode = AUOK190X_UPDATE_MODE(par->update_mode); - par->last_mode = par->update_mode; - } - - if (par->flash) - mode |= AUOK190X_UPDATE_NONFLASH; - - auok1900_update_region(par, mode, y1, y2); -} - -static void auok1900fb_dpy_update(struct auok190xfb_par *par) -{ - int mode; - - if (par->update_mode < 0) { - mode = AUOK190X_UPDATE_MODE(0); - par->last_mode = -1; - } else { - mode = AUOK190X_UPDATE_MODE(par->update_mode); - par->last_mode = par->update_mode; - } - - if (par->flash) - mode |= AUOK190X_UPDATE_NONFLASH; - - auok1900_update_region(par, mode, 0, par->info->var.yres); - par->update_cnt = 0; -} - -static bool auok1900fb_need_refresh(struct auok190xfb_par *par) -{ - return (par->update_cnt > 10); -} - -static int auok1900fb_probe(struct platform_device *pdev) -{ - struct auok190x_init_data init; - struct auok190x_board *board; - - /* pick up board specific routines */ - board = pdev->dev.platform_data; - if (!board) - return -EINVAL; - - /* fill temporary init struct for common init */ - init.id = "auo_k1900fb"; - init.board = board; - init.update_partial = auok1900fb_dpy_update_pages; - init.update_all = auok1900fb_dpy_update; - init.need_refresh = auok1900fb_need_refresh; - init.init = auok1900_init; - - return auok190x_common_probe(pdev, &init); -} - -static int auok1900fb_remove(struct platform_device *pdev) -{ - return auok190x_common_remove(pdev); -} - -static struct platform_driver auok1900fb_driver = { - .probe = auok1900fb_probe, - .remove = auok1900fb_remove, - .driver = { - .name = "auo_k1900fb", - .pm = &auok190x_pm, - }, -}; -module_platform_driver(auok1900fb_driver); - -MODULE_DESCRIPTION("framebuffer driver for the AUO-K1900 EPD controller"); -MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>"); -MODULE_LICENSE("GPL"); diff --git a/drivers/video/fbdev/auo_k1901fb.c b/drivers/video/fbdev/auo_k1901fb.c deleted file mode 100644 index 681fe61957b6..000000000000 --- a/drivers/video/fbdev/auo_k1901fb.c +++ /dev/null @@ -1,257 +0,0 @@ -/* - * auok190xfb.c -- FB driver for AUO-K1901 controllers - * - * Copyright (C) 2011, 2012 Heiko Stuebner <heiko@sntech.de> - * - * based on broadsheetfb.c - * - * Copyright (C) 2008, Jaya Kumar - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven. - * - * This driver is written to be used with the AUO-K1901 display controller. - * - * It is intended to be architecture independent. A board specific driver - * must be used to perform all the physical IO interactions. - * - * The controller supports different update modes: - * mode0+1 16 step gray (4bit) - * mode2+3 4 step gray (2bit) - * mode4+5 2 step gray (1bit) - * - mode4 is described as "without LUT" - * mode7 automatic selection of update mode - * - * The most interesting difference to the K1900 is the ability to do screen - * updates in an asynchronous fashion. Where the K1900 needs to wait for the - * current update to complete, the K1901 can process later updates already. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/fb.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/list.h> -#include <linux/firmware.h> -#include <linux/gpio.h> -#include <linux/pm_runtime.h> - -#include <video/auo_k190xfb.h> - -#include "auo_k190x.h" - -/* - * AUO-K1901 specific commands - */ - -#define AUOK1901_CMD_LUT_INTERFACE 0x0005 -#define AUOK1901_CMD_DMA_START 0x1001 -#define AUOK1901_CMD_CURSOR_START 0x1007 -#define AUOK1901_CMD_CURSOR_STOP AUOK190X_CMD_DATA_STOP -#define AUOK1901_CMD_DDMA_START 0x1009 - -#define AUOK1901_INIT_GATE_PULSE_LOW (0 << 14) -#define AUOK1901_INIT_GATE_PULSE_HIGH (1 << 14) -#define AUOK1901_INIT_SINGLE_GATE (0 << 13) -#define AUOK1901_INIT_DOUBLE_GATE (1 << 13) - -/* Bits to pixels - * Mode 15-12 11-8 7-4 3-0 - * format2 2 T 1 T - * format3 1 T 2 T - * format4 T 2 T 1 - * format5 T 1 T 2 - * - * halftone modes: - * format6 2 2 1 1 - * format7 1 1 2 2 - */ -#define AUOK1901_INIT_FORMAT2 (1 << 7) -#define AUOK1901_INIT_FORMAT3 ((1 << 7) | (1 << 6)) -#define AUOK1901_INIT_FORMAT4 (1 << 8) -#define AUOK1901_INIT_FORMAT5 ((1 << 8) | (1 << 6)) -#define AUOK1901_INIT_FORMAT6 ((1 << 8) | (1 << 7)) -#define AUOK1901_INIT_FORMAT7 ((1 << 8) | (1 << 7) | (1 << 6)) - -/* res[4] to bit 10 - * res[3-0] to bits 5-2 - */ -#define AUOK1901_INIT_RESOLUTION(_res) (((_res & (1 << 4)) << 6) \ - | ((_res & 0xf) << 2)) - -/* - * portrait / landscape orientation in AUOK1901_CMD_DMA_START - */ -#define AUOK1901_DMA_ROTATE90(_rot) ((_rot & 1) << 13) - -/* - * equivalent to 1 << 11, needs the ~ to have same rotation like K1900 - */ -#define AUOK1901_DDMA_ROTATE180(_rot) ((~_rot & 2) << 10) - -static void auok1901_init(struct auok190xfb_par *par) -{ - struct device *dev = par->info->device; - struct auok190x_board *board = par->board; - u16 init_param = 0; - - pm_runtime_get_sync(dev); - - init_param |= AUOK190X_INIT_INVERSE_WHITE; - init_param |= AUOK190X_INIT_FORMAT0; - init_param |= AUOK1901_INIT_RESOLUTION(par->resolution); - init_param |= AUOK190X_INIT_SHIFT_LEFT; - - auok190x_send_cmdargs(par, AUOK190X_CMD_INIT, 1, &init_param); - - /* let the controller finish */ - board->wait_for_rdy(par); - - pm_runtime_mark_last_busy(dev); - pm_runtime_put_autosuspend(dev); -} - -static void auok1901_update_region(struct auok190xfb_par *par, int mode, - u16 y1, u16 y2) -{ - struct device *dev = par->info->device; - unsigned char *buf = (unsigned char *)par->info->screen_base; - int xres = par->info->var.xres; - int line_length = par->info->fix.line_length; - u16 args[5]; - - pm_runtime_get_sync(dev); - - mutex_lock(&(par->io_lock)); - - /* y1 and y2 must be a multiple of 2 so drop the lowest bit */ - y1 &= 0xfffe; - y2 &= 0xfffe; - - dev_dbg(dev, "update (x,y,w,h,mode)=(%d,%d,%d,%d,%d)\n", - 1, y1+1, xres, y2-y1, mode); - - /* K1901: first transfer the region data */ - args[0] = AUOK1901_DMA_ROTATE90(par->rotation) | 1; - args[1] = y1 + 1; - args[2] = xres; - args[3] = y2 - y1; - buf += y1 * line_length; - auok190x_send_cmdargs_pixels_nowait(par, AUOK1901_CMD_DMA_START, 4, - args, ((y2 - y1) * line_length)/2, - (u16 *) buf); - auok190x_send_command_nowait(par, AUOK190X_CMD_DATA_STOP); - - /* K1901: second tell the controller to update the region with mode */ - args[0] = mode | AUOK1901_DDMA_ROTATE180(par->rotation); - args[1] = 1; - args[2] = y1 + 1; - args[3] = xres; - args[4] = y2 - y1; - auok190x_send_cmdargs_nowait(par, AUOK1901_CMD_DDMA_START, 5, args); - - par->update_cnt++; - - mutex_unlock(&(par->io_lock)); - - pm_runtime_mark_last_busy(dev); - pm_runtime_put_autosuspend(dev); -} - -static void auok1901fb_dpy_update_pages(struct auok190xfb_par *par, - u16 y1, u16 y2) -{ - int mode; - - if (par->update_mode < 0) { - mode = AUOK190X_UPDATE_MODE(1); - par->last_mode = -1; - } else { - mode = AUOK190X_UPDATE_MODE(par->update_mode); - par->last_mode = par->update_mode; - } - - if (par->flash) - mode |= AUOK190X_UPDATE_NONFLASH; - - auok1901_update_region(par, mode, y1, y2); -} - -static void auok1901fb_dpy_update(struct auok190xfb_par *par) -{ - int mode; - - /* When doing full updates, wait for the controller to be ready - * This will hopefully catch some hangs of the K1901 - */ - par->board->wait_for_rdy(par); - - if (par->update_mode < 0) { - mode = AUOK190X_UPDATE_MODE(0); - par->last_mode = -1; - } else { - mode = AUOK190X_UPDATE_MODE(par->update_mode); - par->last_mode = par->update_mode; - } - - if (par->flash) - mode |= AUOK190X_UPDATE_NONFLASH; - - auok1901_update_region(par, mode, 0, par->info->var.yres); - par->update_cnt = 0; -} - -static bool auok1901fb_need_refresh(struct auok190xfb_par *par) -{ - return (par->update_cnt > 10); -} - -static int auok1901fb_probe(struct platform_device *pdev) -{ - struct auok190x_init_data init; - struct auok190x_board *board; - - /* pick up board specific routines */ - board = pdev->dev.platform_data; - if (!board) - return -EINVAL; - - /* fill temporary init struct for common init */ - init.id = "auo_k1901fb"; - init.board = board; - init.update_partial = auok1901fb_dpy_update_pages; - init.update_all = auok1901fb_dpy_update; - init.need_refresh = auok1901fb_need_refresh; - init.init = auok1901_init; - - return auok190x_common_probe(pdev, &init); -} - -static int auok1901fb_remove(struct platform_device *pdev) -{ - return auok190x_common_remove(pdev); -} - -static struct platform_driver auok1901fb_driver = { - .probe = auok1901fb_probe, - .remove = auok1901fb_remove, - .driver = { - .name = "auo_k1901fb", - .pm = &auok190x_pm, - }, -}; -module_platform_driver(auok1901fb_driver); - -MODULE_DESCRIPTION("framebuffer driver for the AUO-K1901 EPD controller"); -MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>"); -MODULE_LICENSE("GPL"); diff --git a/drivers/video/fbdev/auo_k190x.c b/drivers/video/fbdev/auo_k190x.c deleted file mode 100644 index 9d24d1b3e9ef..000000000000 --- a/drivers/video/fbdev/auo_k190x.c +++ /dev/null @@ -1,1195 +0,0 @@ -/* - * Common code for AUO-K190X framebuffer drivers - * - * Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/sched/mm.h> -#include <linux/kernel.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/pm_runtime.h> -#include <linux/fb.h> -#include <linux/delay.h> -#include <linux/uaccess.h> -#include <linux/vmalloc.h> -#include <linux/regulator/consumer.h> - -#include <video/auo_k190xfb.h> - -#include "auo_k190x.h" - -struct panel_info { - int w; - int h; -}; - -/* table of panel specific parameters to be indexed into by the board drivers */ -static struct panel_info panel_table[] = { - /* standard 6" */ - [AUOK190X_RESOLUTION_800_600] = { - .w = 800, - .h = 600, - }, - /* standard 9" */ - [AUOK190X_RESOLUTION_1024_768] = { - .w = 1024, - .h = 768, - }, - [AUOK190X_RESOLUTION_600_800] = { - .w = 600, - .h = 800, - }, - [AUOK190X_RESOLUTION_768_1024] = { - .w = 768, - .h = 1024, - }, -}; - -/* - * private I80 interface to the board driver - */ - -static void auok190x_issue_data(struct auok190xfb_par *par, u16 data) -{ - par->board->set_ctl(par, AUOK190X_I80_WR, 0); - par->board->set_hdb(par, data); - par->board->set_ctl(par, AUOK190X_I80_WR, 1); -} - -static void auok190x_issue_cmd(struct auok190xfb_par *par, u16 data) -{ - par->board->set_ctl(par, AUOK190X_I80_DC, 0); - auok190x_issue_data(par, data); - par->board->set_ctl(par, AUOK190X_I80_DC, 1); -} - -/** - * Conversion of 16bit color to 4bit grayscale - * does roughly (0.3 * R + 0.6 G + 0.1 B) / 2 - */ -static inline int rgb565_to_gray4(u16 data, struct fb_var_screeninfo *var) -{ - return ((((data & 0xF800) >> var->red.offset) * 77 + - ((data & 0x07E0) >> (var->green.offset + 1)) * 151 + - ((data & 0x1F) >> var->blue.offset) * 28) >> 8 >> 1); -} - -static int auok190x_issue_pixels_rgb565(struct auok190xfb_par *par, int size, - u16 *data) -{ - struct fb_var_screeninfo *var = &par->info->var; - struct device *dev = par->info->device; - int i; - u16 tmp; - - if (size & 7) { - dev_err(dev, "issue_pixels: size %d must be a multiple of 8\n", - size); - return -EINVAL; - } - - for (i = 0; i < (size >> 2); i++) { - par->board->set_ctl(par, AUOK190X_I80_WR, 0); - - tmp = (rgb565_to_gray4(data[4*i], var) & 0x000F); - tmp |= (rgb565_to_gray4(data[4*i+1], var) << 4) & 0x00F0; - tmp |= (rgb565_to_gray4(data[4*i+2], var) << 8) & 0x0F00; - tmp |= (rgb565_to_gray4(data[4*i+3], var) << 12) & 0xF000; - - par->board->set_hdb(par, tmp); - par->board->set_ctl(par, AUOK190X_I80_WR, 1); - } - - return 0; -} - -static int auok190x_issue_pixels_gray8(struct auok190xfb_par *par, int size, - u16 *data) -{ - struct device *dev = par->info->device; - int i; - u16 tmp; - - if (size & 3) { - dev_err(dev, "issue_pixels: size %d must be a multiple of 4\n", - size); - return -EINVAL; - } - - for (i = 0; i < (size >> 1); i++) { - par->board->set_ctl(par, AUOK190X_I80_WR, 0); - - /* simple reduction of 8bit staticgray to 4bit gray - * combines 4 * 4bit pixel values into a 16bit value - */ - tmp = (data[2*i] & 0xF0) >> 4; - tmp |= (data[2*i] & 0xF000) >> 8; - tmp |= (data[2*i+1] & 0xF0) << 4; - tmp |= (data[2*i+1] & 0xF000); - - par->board->set_hdb(par, tmp); - par->board->set_ctl(par, AUOK190X_I80_WR, 1); - } - - return 0; -} - -static int auok190x_issue_pixels(struct auok190xfb_par *par, int size, - u16 *data) -{ - struct fb_info *info = par->info; - struct device *dev = par->info->device; - - if (info->var.bits_per_pixel == 8 && info->var.grayscale) - auok190x_issue_pixels_gray8(par, size, data); - else if (info->var.bits_per_pixel == 16) - auok190x_issue_pixels_rgb565(par, size, data); - else - dev_err(dev, "unsupported color mode (bits: %d, gray: %d)\n", - info->var.bits_per_pixel, info->var.grayscale); - - return 0; -} - -static u16 auok190x_read_data(struct auok190xfb_par *par) -{ - u16 data; - - par->board->set_ctl(par, AUOK190X_I80_OE, 0); - data = par->board->get_hdb(par); - par->board->set_ctl(par, AUOK190X_I80_OE, 1); - - return data; -} - -/* - * Command interface for the controller drivers - */ - -void auok190x_send_command_nowait(struct auok190xfb_par *par, u16 data) -{ - par->board->set_ctl(par, AUOK190X_I80_CS, 0); - auok190x_issue_cmd(par, data); - par->board->set_ctl(par, AUOK190X_I80_CS, 1); -} -EXPORT_SYMBOL_GPL(auok190x_send_command_nowait); - -void auok190x_send_cmdargs_nowait(struct auok190xfb_par *par, u16 cmd, - int argc, u16 *argv) -{ - int i; - - par->board->set_ctl(par, AUOK190X_I80_CS, 0); - auok190x_issue_cmd(par, cmd); - - for (i = 0; i < argc; i++) - auok190x_issue_data(par, argv[i]); - par->board->set_ctl(par, AUOK190X_I80_CS, 1); -} -EXPORT_SYMBOL_GPL(auok190x_send_cmdargs_nowait); - -int auok190x_send_command(struct auok190xfb_par *par, u16 data) -{ - int ret; - - ret = par->board->wait_for_rdy(par); - if (ret) - return ret; - - auok190x_send_command_nowait(par, data); - return 0; -} -EXPORT_SYMBOL_GPL(auok190x_send_command); - -int auok190x_send_cmdargs(struct auok190xfb_par *par, u16 cmd, - int argc, u16 *argv) -{ - int ret; - - ret = par->board->wait_for_rdy(par); - if (ret) - return ret; - - auok190x_send_cmdargs_nowait(par, cmd, argc, argv); - return 0; -} -EXPORT_SYMBOL_GPL(auok190x_send_cmdargs); - -int auok190x_read_cmdargs(struct auok190xfb_par *par, u16 cmd, - int argc, u16 *argv) -{ - int i, ret; - - ret = par->board->wait_for_rdy(par); - if (ret) - return ret; - - par->board->set_ctl(par, AUOK190X_I80_CS, 0); - auok190x_issue_cmd(par, cmd); - - for (i = 0; i < argc; i++) - argv[i] = auok190x_read_data(par); - par->board->set_ctl(par, AUOK190X_I80_CS, 1); - - return 0; -} -EXPORT_SYMBOL_GPL(auok190x_read_cmdargs); - -void auok190x_send_cmdargs_pixels_nowait(struct auok190xfb_par *par, u16 cmd, - int argc, u16 *argv, int size, u16 *data) -{ - int i; - - par->board->set_ctl(par, AUOK190X_I80_CS, 0); - - auok190x_issue_cmd(par, cmd); - - for (i = 0; i < argc; i++) - auok190x_issue_data(par, argv[i]); - - auok190x_issue_pixels(par, size, data); - - par->board->set_ctl(par, AUOK190X_I80_CS, 1); -} -EXPORT_SYMBOL_GPL(auok190x_send_cmdargs_pixels_nowait); - -int auok190x_send_cmdargs_pixels(struct auok190xfb_par *par, u16 cmd, - int argc, u16 *argv, int size, u16 *data) -{ - int ret; - - ret = par->board->wait_for_rdy(par); - if (ret) - return ret; - - auok190x_send_cmdargs_pixels_nowait(par, cmd, argc, argv, size, data); - - return 0; -} -EXPORT_SYMBOL_GPL(auok190x_send_cmdargs_pixels); - -/* - * fbdefio callbacks - common on both controllers. - */ - -static void auok190xfb_dpy_first_io(struct fb_info *info) -{ - /* tell runtime-pm that we wish to use the device in a short time */ - pm_runtime_get(info->device); -} - -/* this is called back from the deferred io workqueue */ -static void auok190xfb_dpy_deferred_io(struct fb_info *info, - struct list_head *pagelist) -{ - struct fb_deferred_io *fbdefio = info->fbdefio; - struct auok190xfb_par *par = info->par; - u16 line_length = info->fix.line_length; - u16 yres = info->var.yres; - u16 y1 = 0, h = 0; - int prev_index = -1; - struct page *cur; - int h_inc; - int threshold; - - if (!list_empty(pagelist)) - /* the device resume should've been requested through first_io, - * if the resume did not finish until now, wait for it. - */ - pm_runtime_barrier(info->device); - else - /* We reached this via the fsync or some other way. - * In either case the first_io function did not run, - * so we runtime_resume the device here synchronously. - */ - pm_runtime_get_sync(info->device); - - /* Do a full screen update every n updates to prevent - * excessive darkening of the Sipix display. - * If we do this, there is no need to walk the pages. - */ - if (par->need_refresh(par)) { - par->update_all(par); - goto out; - } - - /* height increment is fixed per page */ - h_inc = DIV_ROUND_UP(PAGE_SIZE , line_length); - - /* calculate number of pages from pixel height */ - threshold = par->consecutive_threshold / h_inc; - if (threshold < 1) - threshold = 1; - - /* walk the written page list and swizzle the data */ - list_for_each_entry(cur, &fbdefio->pagelist, lru) { - if (prev_index < 0) { - /* just starting so assign first page */ - y1 = (cur->index << PAGE_SHIFT) / line_length; - h = h_inc; - } else if ((cur->index - prev_index) <= threshold) { - /* page is within our threshold for single updates */ - h += h_inc * (cur->index - prev_index); - } else { - /* page not consecutive, issue previous update first */ - par->update_partial(par, y1, y1 + h); - - /* start over with our non consecutive page */ - y1 = (cur->index << PAGE_SHIFT) / line_length; - h = h_inc; - } - prev_index = cur->index; - } - - /* if we still have any pages to update we do so now */ - if (h >= yres) - /* its a full screen update, just do it */ - par->update_all(par); - else - par->update_partial(par, y1, min((u16) (y1 + h), yres)); - -out: - pm_runtime_mark_last_busy(info->device); - pm_runtime_put_autosuspend(info->device); -} - -/* - * framebuffer operations - */ - -/* - * this is the slow path from userspace. they can seek and write to - * the fb. it's inefficient to do anything less than a full screen draw - */ -static ssize_t auok190xfb_write(struct fb_info *info, const char __user *buf, - size_t count, loff_t *ppos) -{ - struct auok190xfb_par *par = info->par; - unsigned long p = *ppos; - void *dst; - int err = 0; - unsigned long total_size; - - if (info->state != FBINFO_STATE_RUNNING) - return -EPERM; - - total_size = info->fix.smem_len; - - if (p > total_size) - return -EFBIG; - - if (count > total_size) { - err = -EFBIG; - count = total_size; - } - - if (count + p > total_size) { - if (!err) - err = -ENOSPC; - - count = total_size - p; - } - - dst = (void *)(info->screen_base + p); - - if (copy_from_user(dst, buf, count)) - err = -EFAULT; - - if (!err) - *ppos += count; - - par->update_all(par); - - return (err) ? err : count; -} - -static void auok190xfb_fillrect(struct fb_info *info, - const struct fb_fillrect *rect) -{ - struct auok190xfb_par *par = info->par; - - sys_fillrect(info, rect); - - par->update_all(par); -} - -static void auok190xfb_copyarea(struct fb_info *info, - const struct fb_copyarea *area) -{ - struct auok190xfb_par *par = info->par; - - sys_copyarea(info, area); - - par->update_all(par); -} - -static void auok190xfb_imageblit(struct fb_info *info, - const struct fb_image *image) -{ - struct auok190xfb_par *par = info->par; - - sys_imageblit(info, image); - - par->update_all(par); -} - -static int auok190xfb_check_var(struct fb_var_screeninfo *var, - struct fb_info *info) -{ - struct device *dev = info->device; - struct auok190xfb_par *par = info->par; - struct panel_info *panel = &panel_table[par->resolution]; - int size; - - /* - * Color depth - */ - - if (var->bits_per_pixel == 8 && var->grayscale == 1) { - /* - * For 8-bit grayscale, R, G, and B offset are equal. - */ - var->red.length = 8; - var->red.offset = 0; - var->red.msb_right = 0; - - var->green.length = 8; - var->green.offset = 0; - var->green.msb_right = 0; - - var->blue.length = 8; - var->blue.offset = 0; - var->blue.msb_right = 0; - - var->transp.length = 0; - var->transp.offset = 0; - var->transp.msb_right = 0; - } else if (var->bits_per_pixel == 16) { - var->red.length = 5; - var->red.offset = 11; - var->red.msb_right = 0; - - var->green.length = 6; - var->green.offset = 5; - var->green.msb_right = 0; - - var->blue.length = 5; - var->blue.offset = 0; - var->blue.msb_right = 0; - - var->transp.length = 0; - var->transp.offset = 0; - var->transp.msb_right = 0; - } else { - dev_warn(dev, "unsupported color mode (bits: %d, grayscale: %d)\n", - info->var.bits_per_pixel, info->var.grayscale); - return -EINVAL; - } - - /* - * Dimensions - */ - - switch (var->rotate) { - case FB_ROTATE_UR: - case FB_ROTATE_UD: - var->xres = panel->w; - var->yres = panel->h; - break; - case FB_ROTATE_CW: - case FB_ROTATE_CCW: - var->xres = panel->h; - var->yres = panel->w; - break; - default: - dev_dbg(dev, "Invalid rotation request\n"); - return -EINVAL; - } - - var->xres_virtual = var->xres; - var->yres_virtual = var->yres; - - /* - * Memory limit - */ - - size = var->xres_virtual * var->yres_virtual * var->bits_per_pixel / 8; - if (size > info->fix.smem_len) { - dev_err(dev, "Memory limit exceeded, requested %dK\n", - size >> 10); - return -ENOMEM; - } - - return 0; -} - -static int auok190xfb_set_fix(struct fb_info *info) -{ - struct fb_fix_screeninfo *fix = &info->fix; - struct fb_var_screeninfo *var = &info->var; - - fix->line_length = var->xres_virtual * var->bits_per_pixel / 8; - - fix->type = FB_TYPE_PACKED_PIXELS; - fix->accel = FB_ACCEL_NONE; - fix->visual = (var->grayscale) ? FB_VISUAL_STATIC_PSEUDOCOLOR - : FB_VISUAL_TRUECOLOR; - fix->xpanstep = 0; - fix->ypanstep = 0; - fix->ywrapstep = 0; - - return 0; -} - -static int auok190xfb_set_par(struct fb_info *info) -{ - struct auok190xfb_par *par = info->par; - - par->rotation = info->var.rotate; - auok190xfb_set_fix(info); - - /* reinit the controller to honor the rotation */ - par->init(par); - - /* wait for init to complete */ - par->board->wait_for_rdy(par); - - return 0; -} - -static struct fb_ops auok190xfb_ops = { - .owner = THIS_MODULE, - .fb_read = fb_sys_read, - .fb_write = auok190xfb_write, - .fb_fillrect = auok190xfb_fillrect, - .fb_copyarea = auok190xfb_copyarea, - .fb_imageblit = auok190xfb_imageblit, - .fb_check_var = auok190xfb_check_var, - .fb_set_par = auok190xfb_set_par, -}; - -/* - * Controller-functions common to both K1900 and K1901 - */ - -static int auok190x_read_temperature(struct auok190xfb_par *par) -{ - struct device *dev = par->info->device; - u16 data[4]; - int temp; - - pm_runtime_get_sync(dev); - - mutex_lock(&(par->io_lock)); - - auok190x_read_cmdargs(par, AUOK190X_CMD_READ_VERSION, 4, data); - - mutex_unlock(&(par->io_lock)); - - pm_runtime_mark_last_busy(dev); - pm_runtime_put_autosuspend(dev); - - /* sanitize and split of half-degrees for now */ - temp = ((data[0] & AUOK190X_VERSION_TEMP_MASK) >> 1); - - /* handle positive and negative temperatures */ - if (temp >= 201) - return (255 - temp + 1) * (-1); - else - return temp; -} - -static void auok190x_identify(struct auok190xfb_par *par) -{ - struct device *dev = par->info->device; - u16 data[4]; - - pm_runtime_get_sync(dev); - - mutex_lock(&(par->io_lock)); - - auok190x_read_cmdargs(par, AUOK190X_CMD_READ_VERSION, 4, data); - - mutex_unlock(&(par->io_lock)); - - par->epd_type = data[1] & AUOK190X_VERSION_TEMP_MASK; - - par->panel_size_int = AUOK190X_VERSION_SIZE_INT(data[2]); - par->panel_size_float = AUOK190X_VERSION_SIZE_FLOAT(data[2]); - par->panel_model = AUOK190X_VERSION_MODEL(data[2]); - - par->tcon_version = AUOK190X_VERSION_TCON(data[3]); - par->lut_version = AUOK190X_VERSION_LUT(data[3]); - - dev_dbg(dev, "panel %d.%din, model 0x%x, EPD 0x%x TCON-rev 0x%x, LUT-rev 0x%x", - par->panel_size_int, par->panel_size_float, par->panel_model, - par->epd_type, par->tcon_version, par->lut_version); - - pm_runtime_mark_last_busy(dev); - pm_runtime_put_autosuspend(dev); -} - -/* - * Sysfs functions - */ - -static ssize_t update_mode_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct fb_info *info = dev_get_drvdata(dev); - struct auok190xfb_par *par = info->par; - - return sprintf(buf, "%d\n", par->update_mode); -} - -static ssize_t update_mode_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct fb_info *info = dev_get_drvdata(dev); - struct auok190xfb_par *par = info->par; - int mode, ret; - - ret = kstrtoint(buf, 10, &mode); - if (ret) - return ret; - - par->update_mode = mode; - - /* if we enter a better mode, do a full update */ - if (par->last_mode > 1 && mode < par->last_mode) - par->update_all(par); - - return count; -} - -static ssize_t flash_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct fb_info *info = dev_get_drvdata(dev); - struct auok190xfb_par *par = info->par; - - return sprintf(buf, "%d\n", par->flash); -} - -static ssize_t flash_store(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct fb_info *info = dev_get_drvdata(dev); - struct auok190xfb_par *par = info->par; - int flash, ret; - - ret = kstrtoint(buf, 10, &flash); - if (ret) - return ret; - - if (flash > 0) - par->flash = 1; - else - par->flash = 0; - - return count; -} - -static ssize_t temp_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct fb_info *info = dev_get_drvdata(dev); - struct auok190xfb_par *par = info->par; - int temp; - - temp = auok190x_read_temperature(par); - return sprintf(buf, "%d\n", temp); -} - -static DEVICE_ATTR_RW(update_mode); -static DEVICE_ATTR_RW(flash); -static DEVICE_ATTR(temp, 0644, temp_show, NULL); - -static struct attribute *auok190x_attributes[] = { - &dev_attr_update_mode.attr, - &dev_attr_flash.attr, - &dev_attr_temp.attr, - NULL -}; - -static const struct attribute_group auok190x_attr_group = { - .attrs = auok190x_attributes, -}; - -static int auok190x_power(struct auok190xfb_par *par, bool on) -{ - struct auok190x_board *board = par->board; - int ret; - - if (on) { - /* We should maintain POWER up for at least 80ms before set - * RST_N and SLP_N to high (TCON spec 20100803_v35 p59) - */ - ret = regulator_enable(par->regulator); - if (ret) - return ret; - - msleep(200); - gpio_set_value(board->gpio_nrst, 1); - gpio_set_value(board->gpio_nsleep, 1); - msleep(200); - } else { - regulator_disable(par->regulator); - gpio_set_value(board->gpio_nrst, 0); - gpio_set_value(board->gpio_nsleep, 0); - } - - return 0; -} - -/* - * Recovery - powercycle the controller - */ - -static void auok190x_recover(struct auok190xfb_par *par) -{ - struct device *dev = par->info->device; - - auok190x_power(par, 0); - msleep(100); - auok190x_power(par, 1); - - /* after powercycling the device, it's always active */ - pm_runtime_set_active(dev); - par->standby = 0; - - par->init(par); - - /* wait for init to complete */ - par->board->wait_for_rdy(par); -} - -/* - * Power-management - */ -static int __maybe_unused auok190x_runtime_suspend(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct fb_info *info = platform_get_drvdata(pdev); - struct auok190xfb_par *par = info->par; - struct auok190x_board *board = par->board; - u16 standby_param; - - /* take and keep the lock until we are resumed, as the controller - * will never reach the non-busy state when in standby mode - */ - mutex_lock(&(par->io_lock)); - - if (par->standby) { - dev_warn(dev, "already in standby, runtime-pm pairing mismatch\n"); - mutex_unlock(&(par->io_lock)); - return 0; - } - - /* according to runtime_pm.txt runtime_suspend only means, that the - * device will not process data and will not communicate with the CPU - * As we hold the lock, this stays true even without standby - */ - if (board->quirks & AUOK190X_QUIRK_STANDBYBROKEN) { - dev_dbg(dev, "runtime suspend without standby\n"); - goto finish; - } else if (board->quirks & AUOK190X_QUIRK_STANDBYPARAM) { - /* for some TCON versions STANDBY expects a parameter (0) but - * it seems the real tcon version has to be determined yet. - */ - dev_dbg(dev, "runtime suspend with additional empty param\n"); - standby_param = 0; - auok190x_send_cmdargs(par, AUOK190X_CMD_STANDBY, 1, - &standby_param); - } else { - dev_dbg(dev, "runtime suspend without param\n"); - auok190x_send_command(par, AUOK190X_CMD_STANDBY); - } - - msleep(64); - -finish: - par->standby = 1; - - return 0; -} - -static int __maybe_unused auok190x_runtime_resume(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct fb_info *info = platform_get_drvdata(pdev); - struct auok190xfb_par *par = info->par; - struct auok190x_board *board = par->board; - - if (!par->standby) { - dev_warn(dev, "not in standby, runtime-pm pairing mismatch\n"); - return 0; - } - - if (board->quirks & AUOK190X_QUIRK_STANDBYBROKEN) { - dev_dbg(dev, "runtime resume without standby\n"); - } else { - /* when in standby, controller is always busy - * and only accepts the wakeup command - */ - dev_dbg(dev, "runtime resume from standby\n"); - auok190x_send_command_nowait(par, AUOK190X_CMD_WAKEUP); - - msleep(160); - - /* wait for the controller to be ready and release the lock */ - board->wait_for_rdy(par); - } - - par->standby = 0; - - mutex_unlock(&(par->io_lock)); - - return 0; -} - -static int __maybe_unused auok190x_suspend(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct fb_info *info = platform_get_drvdata(pdev); - struct auok190xfb_par *par = info->par; - struct auok190x_board *board = par->board; - int ret; - - dev_dbg(dev, "suspend\n"); - if (board->quirks & AUOK190X_QUIRK_STANDBYBROKEN) { - /* suspend via powering off the ic */ - dev_dbg(dev, "suspend with broken standby\n"); - - auok190x_power(par, 0); - } else { - dev_dbg(dev, "suspend using sleep\n"); - - /* the sleep state can only be entered from the standby state. - * pm_runtime_get_noresume gets called before the suspend call. - * So the devices usage count is >0 but it is not necessarily - * active. - */ - if (!pm_runtime_status_suspended(dev)) { - ret = auok190x_runtime_suspend(dev); - if (ret < 0) { - dev_err(dev, "auok190x_runtime_suspend failed with %d\n", - ret); - return ret; - } - par->manual_standby = 1; - } - - gpio_direction_output(board->gpio_nsleep, 0); - } - - msleep(100); - - return 0; -} - -static int __maybe_unused auok190x_resume(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct fb_info *info = platform_get_drvdata(pdev); - struct auok190xfb_par *par = info->par; - struct auok190x_board *board = par->board; - - dev_dbg(dev, "resume\n"); - if (board->quirks & AUOK190X_QUIRK_STANDBYBROKEN) { - dev_dbg(dev, "resume with broken standby\n"); - - auok190x_power(par, 1); - - par->init(par); - } else { - dev_dbg(dev, "resume from sleep\n"); - - /* device should be in runtime suspend when we were suspended - * and pm_runtime_put_sync gets called after this function. - * So there is no need to touch the standby mode here at all. - */ - gpio_direction_output(board->gpio_nsleep, 1); - msleep(100); - - /* an additional init call seems to be necessary after sleep */ - auok190x_runtime_resume(dev); - par->init(par); - - /* if we were runtime-suspended before, suspend again*/ - if (!par->manual_standby) - auok190x_runtime_suspend(dev); - else - par->manual_standby = 0; - } - - return 0; -} - -const struct dev_pm_ops auok190x_pm = { - SET_RUNTIME_PM_OPS(auok190x_runtime_suspend, auok190x_runtime_resume, - NULL) - SET_SYSTEM_SLEEP_PM_OPS(auok190x_suspend, auok190x_resume) -}; -EXPORT_SYMBOL_GPL(auok190x_pm); - -/* - * Common probe and remove code - */ - -int auok190x_common_probe(struct platform_device *pdev, - struct auok190x_init_data *init) -{ - struct auok190x_board *board = init->board; - struct auok190xfb_par *par; - struct fb_info *info; - struct panel_info *panel; - int videomemorysize, ret; - unsigned char *videomemory; - - /* check board contents */ - if (!board->init || !board->cleanup || !board->wait_for_rdy - || !board->set_ctl || !board->set_hdb || !board->get_hdb - || !board->setup_irq) - return -EINVAL; - - info = framebuffer_alloc(sizeof(struct auok190xfb_par), &pdev->dev); - if (!info) - return -ENOMEM; - - par = info->par; - par->info = info; - par->board = board; - par->recover = auok190x_recover; - par->update_partial = init->update_partial; - par->update_all = init->update_all; - par->need_refresh = init->need_refresh; - par->init = init->init; - - /* init update modes */ - par->update_cnt = 0; - par->update_mode = -1; - par->last_mode = -1; - par->flash = 0; - - par->regulator = regulator_get(info->device, "vdd"); - if (IS_ERR(par->regulator)) { - ret = PTR_ERR(par->regulator); - dev_err(info->device, "Failed to get regulator: %d\n", ret); - goto err_reg; - } - - ret = board->init(par); - if (ret) { - dev_err(info->device, "board init failed, %d\n", ret); - goto err_board; - } - - ret = gpio_request(board->gpio_nsleep, "AUOK190x sleep"); - if (ret) { - dev_err(info->device, "could not request sleep gpio, %d\n", - ret); - goto err_gpio1; - } - - ret = gpio_direction_output(board->gpio_nsleep, 0); - if (ret) { - dev_err(info->device, "could not set sleep gpio, %d\n", ret); - goto err_gpio2; - } - - ret = gpio_request(board->gpio_nrst, "AUOK190x reset"); - if (ret) { - dev_err(info->device, "could not request reset gpio, %d\n", - ret); - goto err_gpio2; - } - - ret = gpio_direction_output(board->gpio_nrst, 0); - if (ret) { - dev_err(info->device, "could not set reset gpio, %d\n", ret); - goto err_gpio3; - } - - ret = auok190x_power(par, 1); - if (ret) { - dev_err(info->device, "could not power on the device, %d\n", - ret); - goto err_gpio3; - } - - mutex_init(&par->io_lock); - - init_waitqueue_head(&par->waitq); - - ret = par->board->setup_irq(par->info); - if (ret) { - dev_err(info->device, "could not setup ready-irq, %d\n", ret); - goto err_irq; - } - - /* wait for init to complete */ - par->board->wait_for_rdy(par); - - /* - * From here on the controller can talk to us - */ - - /* initialise fix, var, resolution and rotation */ - - strlcpy(info->fix.id, init->id, 16); - info->var.bits_per_pixel = 8; - info->var.grayscale = 1; - - panel = &panel_table[board->resolution]; - - par->resolution = board->resolution; - par->rotation = 0; - - /* videomemory handling */ - - videomemorysize = roundup((panel->w * panel->h) * 2, PAGE_SIZE); - videomemory = vzalloc(videomemorysize); - if (!videomemory) { - ret = -ENOMEM; - goto err_irq; - } - - info->screen_base = (char *)videomemory; - info->fix.smem_len = videomemorysize; - - info->flags = FBINFO_FLAG_DEFAULT | FBINFO_VIRTFB; - info->fbops = &auok190xfb_ops; - - ret = auok190xfb_check_var(&info->var, info); - if (ret) - goto err_defio; - - auok190xfb_set_fix(info); - - /* deferred io init */ - - info->fbdefio = devm_kzalloc(info->device, - sizeof(struct fb_deferred_io), - GFP_KERNEL); - if (!info->fbdefio) { - dev_err(info->device, "Failed to allocate memory\n"); - ret = -ENOMEM; - goto err_defio; - } - - dev_dbg(info->device, "targeting %d frames per second\n", board->fps); - info->fbdefio->delay = HZ / board->fps; - info->fbdefio->first_io = auok190xfb_dpy_first_io, - info->fbdefio->deferred_io = auok190xfb_dpy_deferred_io, - fb_deferred_io_init(info); - - /* color map */ - - ret = fb_alloc_cmap(&info->cmap, 256, 0); - if (ret < 0) { - dev_err(info->device, "Failed to allocate colormap\n"); - goto err_cmap; - } - - /* controller init */ - - par->consecutive_threshold = 100; - par->init(par); - auok190x_identify(par); - - platform_set_drvdata(pdev, info); - - ret = register_framebuffer(info); - if (ret < 0) - goto err_regfb; - - ret = sysfs_create_group(&info->device->kobj, &auok190x_attr_group); - if (ret) - goto err_sysfs; - - dev_info(info->device, "fb%d: %dx%d using %dK of video memory\n", - info->node, info->var.xres, info->var.yres, - videomemorysize >> 10); - - /* increase autosuspend_delay when we use alternative methods - * for runtime_pm - */ - par->autosuspend_delay = (board->quirks & AUOK190X_QUIRK_STANDBYBROKEN) - ? 1000 : 200; - - pm_runtime_set_active(info->device); - pm_runtime_enable(info->device); - pm_runtime_set_autosuspend_delay(info->device, par->autosuspend_delay); - pm_runtime_use_autosuspend(info->device); - - return 0; - -err_sysfs: - unregister_framebuffer(info); -err_regfb: - fb_dealloc_cmap(&info->cmap); -err_cmap: - fb_deferred_io_cleanup(info); -err_defio: - vfree((void *)info->screen_base); -err_irq: - auok190x_power(par, 0); -err_gpio3: - gpio_free(board->gpio_nrst); -err_gpio2: - gpio_free(board->gpio_nsleep); -err_gpio1: - board->cleanup(par); -err_board: - regulator_put(par->regulator); -err_reg: - framebuffer_release(info); - - return ret; -} -EXPORT_SYMBOL_GPL(auok190x_common_probe); - -int auok190x_common_remove(struct platform_device *pdev) -{ - struct fb_info *info = platform_get_drvdata(pdev); - struct auok190xfb_par *par = info->par; - struct auok190x_board *board = par->board; - - pm_runtime_disable(info->device); - - sysfs_remove_group(&info->device->kobj, &auok190x_attr_group); - - unregister_framebuffer(info); - - fb_dealloc_cmap(&info->cmap); - - fb_deferred_io_cleanup(info); - - vfree((void *)info->screen_base); - - auok190x_power(par, 0); - - gpio_free(board->gpio_nrst); - gpio_free(board->gpio_nsleep); - - board->cleanup(par); - - regulator_put(par->regulator); - - framebuffer_release(info); - - return 0; -} -EXPORT_SYMBOL_GPL(auok190x_common_remove); - -MODULE_DESCRIPTION("Common code for AUO-K190X controllers"); -MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>"); -MODULE_LICENSE("GPL"); diff --git a/drivers/video/fbdev/auo_k190x.h b/drivers/video/fbdev/auo_k190x.h deleted file mode 100644 index e35af1f51b28..000000000000 --- a/drivers/video/fbdev/auo_k190x.h +++ /dev/null @@ -1,129 +0,0 @@ -/* - * Private common definitions for AUO-K190X framebuffer drivers - * - * Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/* - * I80 interface specific defines - */ - -#define AUOK190X_I80_CS 0x01 -#define AUOK190X_I80_DC 0x02 -#define AUOK190X_I80_WR 0x03 -#define AUOK190X_I80_OE 0x04 - -/* - * AUOK190x commands, common to both controllers - */ - -#define AUOK190X_CMD_INIT 0x0000 -#define AUOK190X_CMD_STANDBY 0x0001 -#define AUOK190X_CMD_WAKEUP 0x0002 -#define AUOK190X_CMD_TCON_RESET 0x0003 -#define AUOK190X_CMD_DATA_STOP 0x1002 -#define AUOK190X_CMD_LUT_START 0x1003 -#define AUOK190X_CMD_DISP_REFRESH 0x1004 -#define AUOK190X_CMD_DISP_RESET 0x1005 -#define AUOK190X_CMD_PRE_DISPLAY_START 0x100D -#define AUOK190X_CMD_PRE_DISPLAY_STOP 0x100F -#define AUOK190X_CMD_FLASH_W 0x2000 -#define AUOK190X_CMD_FLASH_E 0x2001 -#define AUOK190X_CMD_FLASH_STS 0x2002 -#define AUOK190X_CMD_FRAMERATE 0x3000 -#define AUOK190X_CMD_READ_VERSION 0x4000 -#define AUOK190X_CMD_READ_STATUS 0x4001 -#define AUOK190X_CMD_READ_LUT 0x4003 -#define AUOK190X_CMD_DRIVERTIMING 0x5000 -#define AUOK190X_CMD_LBALANCE 0x5001 -#define AUOK190X_CMD_AGINGMODE 0x6000 -#define AUOK190X_CMD_AGINGEXIT 0x6001 - -/* - * Common settings for AUOK190X_CMD_INIT - */ - -#define AUOK190X_INIT_DATA_FILTER (0 << 12) -#define AUOK190X_INIT_DATA_BYPASS (1 << 12) -#define AUOK190X_INIT_INVERSE_WHITE (0 << 9) -#define AUOK190X_INIT_INVERSE_BLACK (1 << 9) -#define AUOK190X_INIT_SCAN_DOWN (0 << 1) -#define AUOK190X_INIT_SCAN_UP (1 << 1) -#define AUOK190X_INIT_SHIFT_LEFT (0 << 0) -#define AUOK190X_INIT_SHIFT_RIGHT (1 << 0) - -/* Common bits to pixels - * Mode 15-12 11-8 7-4 3-0 - * format0 4 3 2 1 - * format1 3 4 1 2 - */ - -#define AUOK190X_INIT_FORMAT0 0 -#define AUOK190X_INIT_FORMAT1 (1 << 6) - -/* - * settings for AUOK190X_CMD_RESET - */ - -#define AUOK190X_RESET_TCON (0 << 0) -#define AUOK190X_RESET_NORMAL (1 << 0) -#define AUOK190X_RESET_PON (1 << 1) - -/* - * AUOK190X_CMD_VERSION - */ - -#define AUOK190X_VERSION_TEMP_MASK (0x1ff) -#define AUOK190X_VERSION_EPD_MASK (0xff) -#define AUOK190X_VERSION_SIZE_INT(_val) ((_val & 0xfc00) >> 10) -#define AUOK190X_VERSION_SIZE_FLOAT(_val) ((_val & 0x3c0) >> 6) -#define AUOK190X_VERSION_MODEL(_val) (_val & 0x3f) -#define AUOK190X_VERSION_LUT(_val) (_val & 0xff) -#define AUOK190X_VERSION_TCON(_val) ((_val & 0xff00) >> 8) - -/* - * update modes for CMD_PARTIALDISP on K1900 and CMD_DDMA on K1901 - */ - -#define AUOK190X_UPDATE_MODE(_res) ((_res & 0x7) << 12) -#define AUOK190X_UPDATE_NONFLASH (1 << 15) - -/* - * track panel specific parameters for common init - */ - -struct auok190x_init_data { - char *id; - struct auok190x_board *board; - - void (*update_partial)(struct auok190xfb_par *par, u16 y1, u16 y2); - void (*update_all)(struct auok190xfb_par *par); - bool (*need_refresh)(struct auok190xfb_par *par); - void (*init)(struct auok190xfb_par *par); -}; - - -extern void auok190x_send_command_nowait(struct auok190xfb_par *par, u16 data); -extern int auok190x_send_command(struct auok190xfb_par *par, u16 data); -extern void auok190x_send_cmdargs_nowait(struct auok190xfb_par *par, u16 cmd, - int argc, u16 *argv); -extern int auok190x_send_cmdargs(struct auok190xfb_par *par, u16 cmd, - int argc, u16 *argv); -extern void auok190x_send_cmdargs_pixels_nowait(struct auok190xfb_par *par, - u16 cmd, int argc, u16 *argv, - int size, u16 *data); -extern int auok190x_send_cmdargs_pixels(struct auok190xfb_par *par, u16 cmd, - int argc, u16 *argv, int size, - u16 *data); -extern int auok190x_read_cmdargs(struct auok190xfb_par *par, u16 cmd, - int argc, u16 *argv); - -extern int auok190x_common_probe(struct platform_device *pdev, - struct auok190x_init_data *init); -extern int auok190x_common_remove(struct platform_device *pdev); - -extern const struct dev_pm_ops auok190x_pm; diff --git a/drivers/video/fbdev/core/fb_defio.c b/drivers/video/fbdev/core/fb_defio.c index 487d5e336e1b..82c20c6047b0 100644 --- a/drivers/video/fbdev/core/fb_defio.c +++ b/drivers/video/fbdev/core/fb_defio.c @@ -37,7 +37,7 @@ static struct page *fb_deferred_io_page(struct fb_info *info, unsigned long offs } /* this is to find and return the vmalloc-ed fb pages */ -static int fb_deferred_io_fault(struct vm_fault *vmf) +static vm_fault_t fb_deferred_io_fault(struct vm_fault *vmf) { unsigned long offset; struct page *page; @@ -90,7 +90,7 @@ int fb_deferred_io_fsync(struct file *file, loff_t start, loff_t end, int datasy EXPORT_SYMBOL_GPL(fb_deferred_io_fsync); /* vm_ops->page_mkwrite handler */ -static int fb_deferred_io_mkwrite(struct vm_fault *vmf) +static vm_fault_t fb_deferred_io_mkwrite(struct vm_fault *vmf) { struct page *page = vmf->page; struct fb_info *info = vmf->vma->vm_private_data; diff --git a/drivers/video/fbdev/mmp/fb/mmpfb.c b/drivers/video/fbdev/mmp/fb/mmpfb.c index f27697e07c55..ee212be67dc6 100644 --- a/drivers/video/fbdev/mmp/fb/mmpfb.c +++ b/drivers/video/fbdev/mmp/fb/mmpfb.c @@ -495,10 +495,9 @@ static int modes_setup(struct mmpfb_info *fbi) /* put videomode list to info structure */ videomodes = kcalloc(videomode_num, sizeof(struct fb_videomode), GFP_KERNEL); - if (!videomodes) { - dev_err(fbi->dev, "can't malloc video modes\n"); + if (!videomodes) return -ENOMEM; - } + for (i = 0; i < videomode_num; i++) mmpmode_to_fbmode(&videomodes[i], &mmp_modes[i]); fb_videomode_to_modelist(videomodes, videomode_num, &info->modelist); diff --git a/drivers/video/fbdev/mmp/hw/mmp_ctrl.c b/drivers/video/fbdev/mmp/hw/mmp_ctrl.c index b6f83d5df9fd..fcdbb2df137f 100644 --- a/drivers/video/fbdev/mmp/hw/mmp_ctrl.c +++ b/drivers/video/fbdev/mmp/hw/mmp_ctrl.c @@ -406,12 +406,10 @@ static int path_init(struct mmphw_path_plat *path_plat, dev_info(ctrl->dev, "%s: %s\n", __func__, config->name); /* init driver data */ - path_info = kzalloc(sizeof(struct mmp_path_info), GFP_KERNEL); - if (!path_info) { - dev_err(ctrl->dev, "%s: unable to alloc path_info for %s\n", - __func__, config->name); + path_info = kzalloc(sizeof(*path_info), GFP_KERNEL); + if (!path_info) return 0; - } + path_info->name = config->name; path_info->id = path_plat->id; path_info->dev = ctrl->dev; diff --git a/drivers/video/fbdev/nvidia/nvidia.c b/drivers/video/fbdev/nvidia/nvidia.c index 2e50120bcfae..fbeeed5afe35 100644 --- a/drivers/video/fbdev/nvidia/nvidia.c +++ b/drivers/video/fbdev/nvidia/nvidia.c @@ -1548,7 +1548,7 @@ MODULE_PARM_DESC(noaccel, "(default=0)"); module_param(noscale, int, 0); MODULE_PARM_DESC(noscale, - "Disables screen scaleing. (0 or 1=disable) " + "Disables screen scaling. (0 or 1=disable) " "(default=0, do scaling)"); module_param(paneltweak, int, 0); MODULE_PARM_DESC(paneltweak, diff --git a/drivers/video/fbdev/omap/lcd_ams_delta.c b/drivers/video/fbdev/omap/lcd_ams_delta.c index a4ee947006c7..e8c748a0dfe2 100644 --- a/drivers/video/fbdev/omap/lcd_ams_delta.c +++ b/drivers/video/fbdev/omap/lcd_ams_delta.c @@ -197,3 +197,7 @@ static struct platform_driver ams_delta_panel_driver = { }; module_platform_driver(ams_delta_panel_driver); + +MODULE_AUTHOR("Jonathan McDowell <noodles@earth.li>"); +MODULE_DESCRIPTION("LCD panel support for the Amstrad E3 (Delta) videophone"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/fbdev/omap/lcd_h3.c b/drivers/video/fbdev/omap/lcd_h3.c index 796f4634c4c6..fd0ac997fb8c 100644 --- a/drivers/video/fbdev/omap/lcd_h3.c +++ b/drivers/video/fbdev/omap/lcd_h3.c @@ -89,3 +89,7 @@ static struct platform_driver h3_panel_driver = { }; module_platform_driver(h3_panel_driver); + +MODULE_AUTHOR("Imre Deak"); +MODULE_DESCRIPTION("LCD panel support for the TI OMAP H3 board"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/fbdev/omap/lcd_htcherald.c b/drivers/video/fbdev/omap/lcd_htcherald.c index 9d692f5b8025..db4ff1c6add9 100644 --- a/drivers/video/fbdev/omap/lcd_htcherald.c +++ b/drivers/video/fbdev/omap/lcd_htcherald.c @@ -66,3 +66,7 @@ static struct platform_driver htcherald_panel_driver = { }; module_platform_driver(htcherald_panel_driver); + +MODULE_AUTHOR("Cory Maccarrone"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("LCD panel support for the HTC Herald"); diff --git a/drivers/video/fbdev/omap/lcd_inn1510.c b/drivers/video/fbdev/omap/lcd_inn1510.c index b284050f5471..1ea775f17bc1 100644 --- a/drivers/video/fbdev/omap/lcd_inn1510.c +++ b/drivers/video/fbdev/omap/lcd_inn1510.c @@ -73,3 +73,7 @@ static struct platform_driver innovator1510_panel_driver = { }; module_platform_driver(innovator1510_panel_driver); + +MODULE_AUTHOR("Imre Deak"); +MODULE_DESCRIPTION("LCD panel support for the TI OMAP1510 Innovator board"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/fbdev/omap/lcd_inn1610.c b/drivers/video/fbdev/omap/lcd_inn1610.c index 1841710e796f..8d0cf68d2de3 100644 --- a/drivers/video/fbdev/omap/lcd_inn1610.c +++ b/drivers/video/fbdev/omap/lcd_inn1610.c @@ -106,3 +106,7 @@ static struct platform_driver innovator1610_panel_driver = { }; module_platform_driver(innovator1610_panel_driver); + +MODULE_AUTHOR("Imre Deak"); +MODULE_DESCRIPTION("LCD panel support for the TI OMAP1610 Innovator board"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/fbdev/omap/lcd_osk.c b/drivers/video/fbdev/omap/lcd_osk.c index b0be5771fe90..9fc43a14957d 100644 --- a/drivers/video/fbdev/omap/lcd_osk.c +++ b/drivers/video/fbdev/omap/lcd_osk.c @@ -93,3 +93,7 @@ static struct platform_driver osk_panel_driver = { }; module_platform_driver(osk_panel_driver); + +MODULE_AUTHOR("Imre Deak"); +MODULE_DESCRIPTION("LCD panel support for the TI OMAP OSK board"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/fbdev/omap/lcd_palmte.c b/drivers/video/fbdev/omap/lcd_palmte.c index cef96386cf80..a0e888643131 100644 --- a/drivers/video/fbdev/omap/lcd_palmte.c +++ b/drivers/video/fbdev/omap/lcd_palmte.c @@ -59,3 +59,7 @@ static struct platform_driver palmte_panel_driver = { }; module_platform_driver(palmte_panel_driver); + +MODULE_AUTHOR("Romain Goyet <r.goyet@gmail.com>, Laurent Gonzalez <palmte.linux@free.fr>"); +MODULE_DESCRIPTION("LCD panel support for the Palm Tungsten E"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/fbdev/omap/lcd_palmtt.c b/drivers/video/fbdev/omap/lcd_palmtt.c index 627f13dae5ad..2c45375e456f 100644 --- a/drivers/video/fbdev/omap/lcd_palmtt.c +++ b/drivers/video/fbdev/omap/lcd_palmtt.c @@ -72,3 +72,7 @@ static struct platform_driver palmtt_panel_driver = { }; module_platform_driver(palmtt_panel_driver); + +MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); +MODULE_DESCRIPTION("LCD panel support for Palm Tungsten|T"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/fbdev/omap/lcd_palmz71.c b/drivers/video/fbdev/omap/lcd_palmz71.c index c46d4db1f839..c99a15ab1826 100644 --- a/drivers/video/fbdev/omap/lcd_palmz71.c +++ b/drivers/video/fbdev/omap/lcd_palmz71.c @@ -66,3 +66,7 @@ static struct platform_driver palmz71_panel_driver = { }; module_platform_driver(palmz71_panel_driver); + +MODULE_AUTHOR("Romain Goyet, Laurent Gonzalez, Marek Vasut"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("LCD panel support for the Palm Zire71"); diff --git a/drivers/video/fbdev/omap/omapfb_main.c b/drivers/video/fbdev/omap/omapfb_main.c index 3479a47a3082..585f39efcff6 100644 --- a/drivers/video/fbdev/omap/omapfb_main.c +++ b/drivers/video/fbdev/omap/omapfb_main.c @@ -1645,7 +1645,7 @@ static int omapfb_do_probe(struct platform_device *pdev, goto cleanup; } - fbdev = kzalloc(sizeof(struct omapfb_device), GFP_KERNEL); + fbdev = kzalloc(sizeof(*fbdev), GFP_KERNEL); if (fbdev == NULL) { dev_err(&pdev->dev, "unable to allocate memory for device info\n"); diff --git a/drivers/video/fbdev/omap2/omapfb/Kconfig b/drivers/video/fbdev/omap2/omapfb/Kconfig index e6226aeed17e..3bf154e676d1 100644 --- a/drivers/video/fbdev/omap2/omapfb/Kconfig +++ b/drivers/video/fbdev/omap2/omapfb/Kconfig @@ -5,6 +5,7 @@ menuconfig FB_OMAP2 tristate "OMAP2+ frame buffer support" depends on FB depends on DRM_OMAP = n + depends on GPIOLIB select FB_OMAP2_DSS select OMAP2_VRFB if ARCH_OMAP2 || ARCH_OMAP3 diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c index bef431530090..87497a00241f 100644 --- a/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c +++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c @@ -387,8 +387,7 @@ static void dsicm_get_resolution(struct omap_dss_device *dssdev, static ssize_t dsicm_num_errors_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct platform_device *pdev = to_platform_device(dev); - struct panel_drv_data *ddata = platform_get_drvdata(pdev); + struct panel_drv_data *ddata = dev_get_drvdata(dev); struct omap_dss_device *in = ddata->in; u8 errors = 0; int r; @@ -419,8 +418,7 @@ static ssize_t dsicm_num_errors_show(struct device *dev, static ssize_t dsicm_hw_revision_show(struct device *dev, struct device_attribute *attr, char *buf) { - struct platform_device *pdev = to_platform_device(dev); - struct panel_drv_data *ddata = platform_get_drvdata(pdev); + struct panel_drv_data *ddata = dev_get_drvdata(dev); struct omap_dss_device *in = ddata->in; u8 id1, id2, id3; int r; @@ -451,8 +449,7 @@ static ssize_t dsicm_store_ulps(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct platform_device *pdev = to_platform_device(dev); - struct panel_drv_data *ddata = platform_get_drvdata(pdev); + struct panel_drv_data *ddata = dev_get_drvdata(dev); struct omap_dss_device *in = ddata->in; unsigned long t; int r; @@ -486,8 +483,7 @@ static ssize_t dsicm_show_ulps(struct device *dev, struct device_attribute *attr, char *buf) { - struct platform_device *pdev = to_platform_device(dev); - struct panel_drv_data *ddata = platform_get_drvdata(pdev); + struct panel_drv_data *ddata = dev_get_drvdata(dev); unsigned t; mutex_lock(&ddata->lock); @@ -501,8 +497,7 @@ static ssize_t dsicm_store_ulps_timeout(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct platform_device *pdev = to_platform_device(dev); - struct panel_drv_data *ddata = platform_get_drvdata(pdev); + struct panel_drv_data *ddata = dev_get_drvdata(dev); struct omap_dss_device *in = ddata->in; unsigned long t; int r; @@ -533,8 +528,7 @@ static ssize_t dsicm_show_ulps_timeout(struct device *dev, struct device_attribute *attr, char *buf) { - struct platform_device *pdev = to_platform_device(dev); - struct panel_drv_data *ddata = platform_get_drvdata(pdev); + struct panel_drv_data *ddata = dev_get_drvdata(dev); unsigned t; mutex_lock(&ddata->lock); diff --git a/drivers/video/fbdev/pxafb.c b/drivers/video/fbdev/pxafb.c index c3d49e13643c..76722a59f55e 100644 --- a/drivers/video/fbdev/pxafb.c +++ b/drivers/video/fbdev/pxafb.c @@ -2115,12 +2115,10 @@ static int of_get_pxafb_display(struct device *dev, struct device_node *disp, if (ret) s = "color-tft"; - for (i = 0; lcd_types[i]; i++) - if (!strcmp(s, lcd_types[i])) - break; - if (!i || !lcd_types[i]) { + i = match_string(lcd_types, -1, s); + if (i < 0) { dev_err(dev, "lcd-type %s is unknown\n", s); - return -EINVAL; + return i; } info->lcd_conn |= LCD_CONN_TYPE(i); info->lcd_conn |= LCD_CONN_WIDTH(bus_width); diff --git a/drivers/video/fbdev/savage/savagefb_driver.c b/drivers/video/fbdev/savage/savagefb_driver.c index c20468362f11..c09d7426cd92 100644 --- a/drivers/video/fbdev/savage/savagefb_driver.c +++ b/drivers/video/fbdev/savage/savagefb_driver.c @@ -1892,11 +1892,11 @@ static int savage_init_hw(struct savagefb_par *par) vga_out8(0x3d4, 0x66, par); cr66 = vga_in8(0x3d5, par); vga_out8(0x3d5, cr66 | 0x02, par); - mdelay(10); + usleep_range(10000, 11000); vga_out8(0x3d4, 0x66, par); vga_out8(0x3d5, cr66 & ~0x02, par); /* clear reset flag */ - mdelay(10); + usleep_range(10000, 11000); /* @@ -1906,11 +1906,11 @@ static int savage_init_hw(struct savagefb_par *par) vga_out8(0x3d4, 0x3f, par); cr3f = vga_in8(0x3d5, par); vga_out8(0x3d5, cr3f | 0x08, par); - mdelay(10); + usleep_range(10000, 11000); vga_out8(0x3d4, 0x3f, par); vga_out8(0x3d5, cr3f & ~0x08, par); /* clear reset flags */ - mdelay(10); + usleep_range(10000, 11000); /* Savage ramdac speeds */ par->numClocks = 4; diff --git a/drivers/video/fbdev/sh_mobile_lcdcfb.c b/drivers/video/fbdev/sh_mobile_lcdcfb.c index c3a46506e47e..dc46be38c970 100644 --- a/drivers/video/fbdev/sh_mobile_lcdcfb.c +++ b/drivers/video/fbdev/sh_mobile_lcdcfb.c @@ -29,7 +29,6 @@ #include <linux/vmalloc.h> #include <video/sh_mobile_lcdc.h> -#include <video/sh_mobile_meram.h> #include "sh_mobile_lcdcfb.h" @@ -217,7 +216,6 @@ struct sh_mobile_lcdc_priv { struct notifier_block notifier; int started; int forced_fourcc; /* 2 channel LCDC must share fourcc setting */ - struct sh_mobile_meram_info *meram_dev; }; /* ----------------------------------------------------------------------------- @@ -346,16 +344,12 @@ static void sh_mobile_lcdc_clk_on(struct sh_mobile_lcdc_priv *priv) if (priv->dot_clk) clk_prepare_enable(priv->dot_clk); pm_runtime_get_sync(priv->dev); - if (priv->meram_dev && priv->meram_dev->pdev) - pm_runtime_get_sync(&priv->meram_dev->pdev->dev); } } static void sh_mobile_lcdc_clk_off(struct sh_mobile_lcdc_priv *priv) { if (atomic_sub_return(1, &priv->hw_usecnt) == -1) { - if (priv->meram_dev && priv->meram_dev->pdev) - pm_runtime_put_sync(&priv->meram_dev->pdev->dev); pm_runtime_put(priv->dev); if (priv->dot_clk) clk_disable_unprepare(priv->dot_clk); @@ -1073,7 +1067,6 @@ static void __sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv) static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv) { - struct sh_mobile_meram_info *mdev = priv->meram_dev; struct sh_mobile_lcdc_chan *ch; unsigned long tmp; int ret; @@ -1106,9 +1099,6 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv) /* Compute frame buffer base address and pitch for each channel. */ for (k = 0; k < ARRAY_SIZE(priv->ch); k++) { - int pixelformat; - void *cache; - ch = &priv->ch[k]; if (!ch->enabled) continue; @@ -1117,45 +1107,6 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv) ch->base_addr_c = ch->dma_handle + ch->xres_virtual * ch->yres_virtual; ch->line_size = ch->pitch; - - /* Enable MERAM if possible. */ - if (mdev == NULL || ch->cfg->meram_cfg == NULL) - continue; - - /* Free the allocated MERAM cache. */ - if (ch->cache) { - sh_mobile_meram_cache_free(mdev, ch->cache); - ch->cache = NULL; - } - - switch (ch->format->fourcc) { - case V4L2_PIX_FMT_NV12: - case V4L2_PIX_FMT_NV21: - case V4L2_PIX_FMT_NV16: - case V4L2_PIX_FMT_NV61: - pixelformat = SH_MOBILE_MERAM_PF_NV; - break; - case V4L2_PIX_FMT_NV24: - case V4L2_PIX_FMT_NV42: - pixelformat = SH_MOBILE_MERAM_PF_NV24; - break; - case V4L2_PIX_FMT_RGB565: - case V4L2_PIX_FMT_BGR24: - case V4L2_PIX_FMT_BGR32: - default: - pixelformat = SH_MOBILE_MERAM_PF_RGB; - break; - } - - cache = sh_mobile_meram_cache_alloc(mdev, ch->cfg->meram_cfg, - ch->pitch, ch->yres, pixelformat, - &ch->line_size); - if (!IS_ERR(cache)) { - sh_mobile_meram_cache_update(mdev, cache, - ch->base_addr_y, ch->base_addr_c, - &ch->base_addr_y, &ch->base_addr_c); - ch->cache = cache; - } } for (k = 0; k < ARRAY_SIZE(priv->overlays); ++k) { @@ -1223,13 +1174,6 @@ static void sh_mobile_lcdc_stop(struct sh_mobile_lcdc_priv *priv) } sh_mobile_lcdc_display_off(ch); - - /* Free the MERAM cache. */ - if (ch->cache) { - sh_mobile_meram_cache_free(priv->meram_dev, ch->cache); - ch->cache = NULL; - } - } /* stop the lcdc */ @@ -1851,11 +1795,6 @@ static int sh_mobile_lcdc_pan(struct fb_var_screeninfo *var, base_addr_c = ch->dma_handle + ch->xres_virtual * ch->yres_virtual + c_offset; - if (ch->cache) - sh_mobile_meram_cache_update(priv->meram_dev, ch->cache, - base_addr_y, base_addr_c, - &base_addr_y, &base_addr_c); - ch->base_addr_y = base_addr_y; ch->base_addr_c = base_addr_c; ch->pan_y_offset = y_offset; @@ -2149,10 +2088,8 @@ sh_mobile_lcdc_channel_fb_register(struct sh_mobile_lcdc_chan *ch) if (info->fbdefio) { ch->sglist = vmalloc(sizeof(struct scatterlist) * ch->fb_size >> PAGE_SHIFT); - if (!ch->sglist) { - dev_err(ch->lcdc->dev, "cannot allocate sglist\n"); + if (!ch->sglist) return -ENOMEM; - } } info->bl_dev = ch->bl; @@ -2354,8 +2291,7 @@ static int sh_mobile_lcdc_resume(struct device *dev) static int sh_mobile_lcdc_runtime_suspend(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct sh_mobile_lcdc_priv *priv = platform_get_drvdata(pdev); + struct sh_mobile_lcdc_priv *priv = dev_get_drvdata(dev); /* turn off LCDC hardware */ lcdc_write(priv, _LDCNT1R, 0); @@ -2365,8 +2301,7 @@ static int sh_mobile_lcdc_runtime_suspend(struct device *dev) static int sh_mobile_lcdc_runtime_resume(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct sh_mobile_lcdc_priv *priv = platform_get_drvdata(pdev); + struct sh_mobile_lcdc_priv *priv = dev_get_drvdata(dev); __sh_mobile_lcdc_start(priv); @@ -2718,13 +2653,11 @@ static int sh_mobile_lcdc_probe(struct platform_device *pdev) } priv = kzalloc(sizeof(*priv), GFP_KERNEL); - if (!priv) { - dev_err(&pdev->dev, "cannot allocate device data\n"); + if (!priv) return -ENOMEM; - } priv->dev = &pdev->dev; - priv->meram_dev = pdata->meram_dev; + for (i = 0; i < ARRAY_SIZE(priv->ch); i++) mutex_init(&priv->ch[i].open_lock); platform_set_drvdata(pdev, priv); diff --git a/drivers/video/fbdev/sh_mobile_lcdcfb.h b/drivers/video/fbdev/sh_mobile_lcdcfb.h index cc52c74721fe..b8e47a8bd8ab 100644 --- a/drivers/video/fbdev/sh_mobile_lcdcfb.h +++ b/drivers/video/fbdev/sh_mobile_lcdcfb.h @@ -61,7 +61,6 @@ struct sh_mobile_lcdc_chan { unsigned long *reg_offs; unsigned long ldmt1r_value; unsigned long enabled; /* ME and SE in LDCNT2R */ - void *cache; struct mutex open_lock; /* protects the use counter */ int use_count; diff --git a/drivers/video/fbdev/sh_mobile_meram.c b/drivers/video/fbdev/sh_mobile_meram.c deleted file mode 100644 index baadfb207b2e..000000000000 --- a/drivers/video/fbdev/sh_mobile_meram.c +++ /dev/null @@ -1,758 +0,0 @@ -/* - * SuperH Mobile MERAM Driver for SuperH Mobile LCDC Driver - * - * Copyright (c) 2011 Damian Hobson-Garcia <dhobsong@igel.co.jp> - * Takanari Hayama <taki@igel.co.jp> - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/device.h> -#include <linux/err.h> -#include <linux/export.h> -#include <linux/genalloc.h> -#include <linux/io.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/pm_runtime.h> -#include <linux/slab.h> - -#include <video/sh_mobile_meram.h> - -/* ----------------------------------------------------------------------------- - * MERAM registers - */ - -#define MEVCR1 0x4 -#define MEVCR1_RST (1 << 31) -#define MEVCR1_WD (1 << 30) -#define MEVCR1_AMD1 (1 << 29) -#define MEVCR1_AMD0 (1 << 28) -#define MEQSEL1 0x40 -#define MEQSEL2 0x44 - -#define MExxCTL 0x400 -#define MExxCTL_BV (1 << 31) -#define MExxCTL_BSZ_SHIFT 28 -#define MExxCTL_MSAR_MASK (0x7ff << MExxCTL_MSAR_SHIFT) -#define MExxCTL_MSAR_SHIFT 16 -#define MExxCTL_NXT_MASK (0x1f << MExxCTL_NXT_SHIFT) -#define MExxCTL_NXT_SHIFT 11 -#define MExxCTL_WD1 (1 << 10) -#define MExxCTL_WD0 (1 << 9) -#define MExxCTL_WS (1 << 8) -#define MExxCTL_CB (1 << 7) -#define MExxCTL_WBF (1 << 6) -#define MExxCTL_WF (1 << 5) -#define MExxCTL_RF (1 << 4) -#define MExxCTL_CM (1 << 3) -#define MExxCTL_MD_READ (1 << 0) -#define MExxCTL_MD_WRITE (2 << 0) -#define MExxCTL_MD_ICB_WB (3 << 0) -#define MExxCTL_MD_ICB (4 << 0) -#define MExxCTL_MD_FB (7 << 0) -#define MExxCTL_MD_MASK (7 << 0) -#define MExxBSIZE 0x404 -#define MExxBSIZE_RCNT_SHIFT 28 -#define MExxBSIZE_YSZM1_SHIFT 16 -#define MExxBSIZE_XSZM1_SHIFT 0 -#define MExxMNCF 0x408 -#define MExxMNCF_KWBNM_SHIFT 28 -#define MExxMNCF_KRBNM_SHIFT 24 -#define MExxMNCF_BNM_SHIFT 16 -#define MExxMNCF_XBV (1 << 15) -#define MExxMNCF_CPL_YCBCR444 (1 << 12) -#define MExxMNCF_CPL_YCBCR420 (2 << 12) -#define MExxMNCF_CPL_YCBCR422 (3 << 12) -#define MExxMNCF_CPL_MSK (3 << 12) -#define MExxMNCF_BL (1 << 2) -#define MExxMNCF_LNM_SHIFT 0 -#define MExxSARA 0x410 -#define MExxSARB 0x414 -#define MExxSBSIZE 0x418 -#define MExxSBSIZE_HDV (1 << 31) -#define MExxSBSIZE_HSZ16 (0 << 28) -#define MExxSBSIZE_HSZ32 (1 << 28) -#define MExxSBSIZE_HSZ64 (2 << 28) -#define MExxSBSIZE_HSZ128 (3 << 28) -#define MExxSBSIZE_SBSIZZ_SHIFT 0 - -#define MERAM_MExxCTL_VAL(next, addr) \ - ((((next) << MExxCTL_NXT_SHIFT) & MExxCTL_NXT_MASK) | \ - (((addr) << MExxCTL_MSAR_SHIFT) & MExxCTL_MSAR_MASK)) -#define MERAM_MExxBSIZE_VAL(rcnt, yszm1, xszm1) \ - (((rcnt) << MExxBSIZE_RCNT_SHIFT) | \ - ((yszm1) << MExxBSIZE_YSZM1_SHIFT) | \ - ((xszm1) << MExxBSIZE_XSZM1_SHIFT)) - -static const unsigned long common_regs[] = { - MEVCR1, - MEQSEL1, - MEQSEL2, -}; -#define MERAM_REGS_SIZE ARRAY_SIZE(common_regs) - -static const unsigned long icb_regs[] = { - MExxCTL, - MExxBSIZE, - MExxMNCF, - MExxSARA, - MExxSARB, - MExxSBSIZE, -}; -#define ICB_REGS_SIZE ARRAY_SIZE(icb_regs) - -/* - * sh_mobile_meram_icb - MERAM ICB information - * @regs: Registers cache - * @index: ICB index - * @offset: MERAM block offset - * @size: MERAM block size in KiB - * @cache_unit: Bytes to cache per ICB - * @pixelformat: Video pixel format of the data stored in the ICB - * @current_reg: Which of Start Address Register A (0) or B (1) is in use - */ -struct sh_mobile_meram_icb { - unsigned long regs[ICB_REGS_SIZE]; - unsigned int index; - unsigned long offset; - unsigned int size; - - unsigned int cache_unit; - unsigned int pixelformat; - unsigned int current_reg; -}; - -#define MERAM_ICB_NUM 32 - -struct sh_mobile_meram_fb_plane { - struct sh_mobile_meram_icb *marker; - struct sh_mobile_meram_icb *cache; -}; - -struct sh_mobile_meram_fb_cache { - unsigned int nplanes; - struct sh_mobile_meram_fb_plane planes[2]; -}; - -/* - * sh_mobile_meram_priv - MERAM device - * @base: Registers base address - * @meram: MERAM physical address - * @regs: Registers cache - * @lock: Protects used_icb and icbs - * @used_icb: Bitmask of used ICBs - * @icbs: ICBs - * @pool: Allocation pool to manage the MERAM - */ -struct sh_mobile_meram_priv { - void __iomem *base; - unsigned long meram; - unsigned long regs[MERAM_REGS_SIZE]; - - struct mutex lock; - unsigned long used_icb; - struct sh_mobile_meram_icb icbs[MERAM_ICB_NUM]; - - struct gen_pool *pool; -}; - -/* settings */ -#define MERAM_GRANULARITY 1024 -#define MERAM_SEC_LINE 15 -#define MERAM_LINE_WIDTH 2048 - -/* ----------------------------------------------------------------------------- - * Registers access - */ - -#define MERAM_ICB_OFFSET(base, idx, off) ((base) + (off) + (idx) * 0x20) - -static inline void meram_write_icb(void __iomem *base, unsigned int idx, - unsigned int off, unsigned long val) -{ - iowrite32(val, MERAM_ICB_OFFSET(base, idx, off)); -} - -static inline unsigned long meram_read_icb(void __iomem *base, unsigned int idx, - unsigned int off) -{ - return ioread32(MERAM_ICB_OFFSET(base, idx, off)); -} - -static inline void meram_write_reg(void __iomem *base, unsigned int off, - unsigned long val) -{ - iowrite32(val, base + off); -} - -static inline unsigned long meram_read_reg(void __iomem *base, unsigned int off) -{ - return ioread32(base + off); -} - -/* ----------------------------------------------------------------------------- - * MERAM allocation and free - */ - -static unsigned long meram_alloc(struct sh_mobile_meram_priv *priv, size_t size) -{ - return gen_pool_alloc(priv->pool, size); -} - -static void meram_free(struct sh_mobile_meram_priv *priv, unsigned long mem, - size_t size) -{ - gen_pool_free(priv->pool, mem, size); -} - -/* ----------------------------------------------------------------------------- - * LCDC cache planes allocation, init, cleanup and free - */ - -/* Allocate ICBs and MERAM for a plane. */ -static int meram_plane_alloc(struct sh_mobile_meram_priv *priv, - struct sh_mobile_meram_fb_plane *plane, - size_t size) -{ - unsigned long mem; - unsigned long idx; - - idx = find_first_zero_bit(&priv->used_icb, 28); - if (idx == 28) - return -ENOMEM; - plane->cache = &priv->icbs[idx]; - - idx = find_next_zero_bit(&priv->used_icb, 32, 28); - if (idx == 32) - return -ENOMEM; - plane->marker = &priv->icbs[idx]; - - mem = meram_alloc(priv, size * 1024); - if (mem == 0) - return -ENOMEM; - - __set_bit(plane->marker->index, &priv->used_icb); - __set_bit(plane->cache->index, &priv->used_icb); - - plane->marker->offset = mem - priv->meram; - plane->marker->size = size; - - return 0; -} - -/* Free ICBs and MERAM for a plane. */ -static void meram_plane_free(struct sh_mobile_meram_priv *priv, - struct sh_mobile_meram_fb_plane *plane) -{ - meram_free(priv, priv->meram + plane->marker->offset, - plane->marker->size * 1024); - - __clear_bit(plane->marker->index, &priv->used_icb); - __clear_bit(plane->cache->index, &priv->used_icb); -} - -/* Is this a YCbCr(NV12, NV16 or NV24) colorspace? */ -static int is_nvcolor(int cspace) -{ - if (cspace == SH_MOBILE_MERAM_PF_NV || - cspace == SH_MOBILE_MERAM_PF_NV24) - return 1; - return 0; -} - -/* Set the next address to fetch. */ -static void meram_set_next_addr(struct sh_mobile_meram_priv *priv, - struct sh_mobile_meram_fb_cache *cache, - unsigned long base_addr_y, - unsigned long base_addr_c) -{ - struct sh_mobile_meram_icb *icb = cache->planes[0].marker; - unsigned long target; - - icb->current_reg ^= 1; - target = icb->current_reg ? MExxSARB : MExxSARA; - - /* set the next address to fetch */ - meram_write_icb(priv->base, cache->planes[0].cache->index, target, - base_addr_y); - meram_write_icb(priv->base, cache->planes[0].marker->index, target, - base_addr_y + cache->planes[0].marker->cache_unit); - - if (cache->nplanes == 2) { - meram_write_icb(priv->base, cache->planes[1].cache->index, - target, base_addr_c); - meram_write_icb(priv->base, cache->planes[1].marker->index, - target, base_addr_c + - cache->planes[1].marker->cache_unit); - } -} - -/* Get the next ICB address. */ -static void -meram_get_next_icb_addr(struct sh_mobile_meram_info *pdata, - struct sh_mobile_meram_fb_cache *cache, - unsigned long *icb_addr_y, unsigned long *icb_addr_c) -{ - struct sh_mobile_meram_icb *icb = cache->planes[0].marker; - unsigned long icb_offset; - - if (pdata->addr_mode == SH_MOBILE_MERAM_MODE0) - icb_offset = 0x80000000 | (icb->current_reg << 29); - else - icb_offset = 0xc0000000 | (icb->current_reg << 23); - - *icb_addr_y = icb_offset | (cache->planes[0].marker->index << 24); - if (cache->nplanes == 2) - *icb_addr_c = icb_offset - | (cache->planes[1].marker->index << 24); -} - -#define MERAM_CALC_BYTECOUNT(x, y) \ - (((x) * (y) + (MERAM_LINE_WIDTH - 1)) & ~(MERAM_LINE_WIDTH - 1)) - -/* Initialize MERAM. */ -static int meram_plane_init(struct sh_mobile_meram_priv *priv, - struct sh_mobile_meram_fb_plane *plane, - unsigned int xres, unsigned int yres, - unsigned int *out_pitch) -{ - struct sh_mobile_meram_icb *marker = plane->marker; - unsigned long total_byte_count = MERAM_CALC_BYTECOUNT(xres, yres); - unsigned long bnm; - unsigned int lcdc_pitch; - unsigned int xpitch; - unsigned int line_cnt; - unsigned int save_lines; - - /* adjust pitch to 1024, 2048, 4096 or 8192 */ - lcdc_pitch = (xres - 1) | 1023; - lcdc_pitch = lcdc_pitch | (lcdc_pitch >> 1); - lcdc_pitch = lcdc_pitch | (lcdc_pitch >> 2); - lcdc_pitch += 1; - - /* derive settings */ - if (lcdc_pitch == 8192 && yres >= 1024) { - lcdc_pitch = xpitch = MERAM_LINE_WIDTH; - line_cnt = total_byte_count >> 11; - *out_pitch = xres; - save_lines = plane->marker->size / 16 / MERAM_SEC_LINE; - save_lines *= MERAM_SEC_LINE; - } else { - xpitch = xres; - line_cnt = yres; - *out_pitch = lcdc_pitch; - save_lines = plane->marker->size / (lcdc_pitch >> 10) / 2; - save_lines &= 0xff; - } - bnm = (save_lines - 1) << 16; - - /* TODO: we better to check if we have enough MERAM buffer size */ - - /* set up ICB */ - meram_write_icb(priv->base, plane->cache->index, MExxBSIZE, - MERAM_MExxBSIZE_VAL(0x0, line_cnt - 1, xpitch - 1)); - meram_write_icb(priv->base, plane->marker->index, MExxBSIZE, - MERAM_MExxBSIZE_VAL(0xf, line_cnt - 1, xpitch - 1)); - - meram_write_icb(priv->base, plane->cache->index, MExxMNCF, bnm); - meram_write_icb(priv->base, plane->marker->index, MExxMNCF, bnm); - - meram_write_icb(priv->base, plane->cache->index, MExxSBSIZE, xpitch); - meram_write_icb(priv->base, plane->marker->index, MExxSBSIZE, xpitch); - - /* save a cache unit size */ - plane->cache->cache_unit = xres * save_lines; - plane->marker->cache_unit = xres * save_lines; - - /* - * Set MERAM for framebuffer - * - * we also chain the cache_icb and the marker_icb. - * we also split the allocated MERAM buffer between two ICBs. - */ - meram_write_icb(priv->base, plane->cache->index, MExxCTL, - MERAM_MExxCTL_VAL(plane->marker->index, marker->offset) - | MExxCTL_WD1 | MExxCTL_WD0 | MExxCTL_WS | MExxCTL_CM | - MExxCTL_MD_FB); - meram_write_icb(priv->base, plane->marker->index, MExxCTL, - MERAM_MExxCTL_VAL(plane->cache->index, marker->offset + - plane->marker->size / 2) | - MExxCTL_WD1 | MExxCTL_WD0 | MExxCTL_WS | MExxCTL_CM | - MExxCTL_MD_FB); - - return 0; -} - -static void meram_plane_cleanup(struct sh_mobile_meram_priv *priv, - struct sh_mobile_meram_fb_plane *plane) -{ - /* disable ICB */ - meram_write_icb(priv->base, plane->cache->index, MExxCTL, - MExxCTL_WBF | MExxCTL_WF | MExxCTL_RF); - meram_write_icb(priv->base, plane->marker->index, MExxCTL, - MExxCTL_WBF | MExxCTL_WF | MExxCTL_RF); - - plane->cache->cache_unit = 0; - plane->marker->cache_unit = 0; -} - -/* ----------------------------------------------------------------------------- - * MERAM operations - */ - -unsigned long sh_mobile_meram_alloc(struct sh_mobile_meram_info *pdata, - size_t size) -{ - struct sh_mobile_meram_priv *priv = pdata->priv; - - return meram_alloc(priv, size); -} -EXPORT_SYMBOL_GPL(sh_mobile_meram_alloc); - -void sh_mobile_meram_free(struct sh_mobile_meram_info *pdata, unsigned long mem, - size_t size) -{ - struct sh_mobile_meram_priv *priv = pdata->priv; - - meram_free(priv, mem, size); -} -EXPORT_SYMBOL_GPL(sh_mobile_meram_free); - -/* Allocate memory for the ICBs and mark them as used. */ -static struct sh_mobile_meram_fb_cache * -meram_cache_alloc(struct sh_mobile_meram_priv *priv, - const struct sh_mobile_meram_cfg *cfg, - int pixelformat) -{ - unsigned int nplanes = is_nvcolor(pixelformat) ? 2 : 1; - struct sh_mobile_meram_fb_cache *cache; - int ret; - - cache = kzalloc(sizeof(*cache), GFP_KERNEL); - if (cache == NULL) - return ERR_PTR(-ENOMEM); - - cache->nplanes = nplanes; - - ret = meram_plane_alloc(priv, &cache->planes[0], - cfg->icb[0].meram_size); - if (ret < 0) - goto error; - - cache->planes[0].marker->current_reg = 1; - cache->planes[0].marker->pixelformat = pixelformat; - - if (cache->nplanes == 1) - return cache; - - ret = meram_plane_alloc(priv, &cache->planes[1], - cfg->icb[1].meram_size); - if (ret < 0) { - meram_plane_free(priv, &cache->planes[0]); - goto error; - } - - return cache; - -error: - kfree(cache); - return ERR_PTR(-ENOMEM); -} - -void *sh_mobile_meram_cache_alloc(struct sh_mobile_meram_info *pdata, - const struct sh_mobile_meram_cfg *cfg, - unsigned int xres, unsigned int yres, - unsigned int pixelformat, unsigned int *pitch) -{ - struct sh_mobile_meram_fb_cache *cache; - struct sh_mobile_meram_priv *priv = pdata->priv; - struct platform_device *pdev = pdata->pdev; - unsigned int nplanes = is_nvcolor(pixelformat) ? 2 : 1; - unsigned int out_pitch; - - if (priv == NULL) - return ERR_PTR(-ENODEV); - - if (pixelformat != SH_MOBILE_MERAM_PF_NV && - pixelformat != SH_MOBILE_MERAM_PF_NV24 && - pixelformat != SH_MOBILE_MERAM_PF_RGB) - return ERR_PTR(-EINVAL); - - dev_dbg(&pdev->dev, "registering %dx%d (%s)", xres, yres, - !pixelformat ? "yuv" : "rgb"); - - /* we can't handle wider than 8192px */ - if (xres > 8192) { - dev_err(&pdev->dev, "width exceeding the limit (> 8192)."); - return ERR_PTR(-EINVAL); - } - - if (cfg->icb[0].meram_size == 0) - return ERR_PTR(-EINVAL); - - if (nplanes == 2 && cfg->icb[1].meram_size == 0) - return ERR_PTR(-EINVAL); - - mutex_lock(&priv->lock); - - /* We now register the ICBs and allocate the MERAM regions. */ - cache = meram_cache_alloc(priv, cfg, pixelformat); - if (IS_ERR(cache)) { - dev_err(&pdev->dev, "MERAM allocation failed (%ld).", - PTR_ERR(cache)); - goto err; - } - - /* initialize MERAM */ - meram_plane_init(priv, &cache->planes[0], xres, yres, &out_pitch); - *pitch = out_pitch; - if (pixelformat == SH_MOBILE_MERAM_PF_NV) - meram_plane_init(priv, &cache->planes[1], - xres, (yres + 1) / 2, &out_pitch); - else if (pixelformat == SH_MOBILE_MERAM_PF_NV24) - meram_plane_init(priv, &cache->planes[1], - 2 * xres, (yres + 1) / 2, &out_pitch); - -err: - mutex_unlock(&priv->lock); - return cache; -} -EXPORT_SYMBOL_GPL(sh_mobile_meram_cache_alloc); - -void -sh_mobile_meram_cache_free(struct sh_mobile_meram_info *pdata, void *data) -{ - struct sh_mobile_meram_fb_cache *cache = data; - struct sh_mobile_meram_priv *priv = pdata->priv; - - mutex_lock(&priv->lock); - - /* Cleanup and free. */ - meram_plane_cleanup(priv, &cache->planes[0]); - meram_plane_free(priv, &cache->planes[0]); - - if (cache->nplanes == 2) { - meram_plane_cleanup(priv, &cache->planes[1]); - meram_plane_free(priv, &cache->planes[1]); - } - - kfree(cache); - - mutex_unlock(&priv->lock); -} -EXPORT_SYMBOL_GPL(sh_mobile_meram_cache_free); - -void -sh_mobile_meram_cache_update(struct sh_mobile_meram_info *pdata, void *data, - unsigned long base_addr_y, - unsigned long base_addr_c, - unsigned long *icb_addr_y, - unsigned long *icb_addr_c) -{ - struct sh_mobile_meram_fb_cache *cache = data; - struct sh_mobile_meram_priv *priv = pdata->priv; - - mutex_lock(&priv->lock); - - meram_set_next_addr(priv, cache, base_addr_y, base_addr_c); - meram_get_next_icb_addr(pdata, cache, icb_addr_y, icb_addr_c); - - mutex_unlock(&priv->lock); -} -EXPORT_SYMBOL_GPL(sh_mobile_meram_cache_update); - -/* ----------------------------------------------------------------------------- - * Power management - */ - -#ifdef CONFIG_PM -static int sh_mobile_meram_suspend(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct sh_mobile_meram_priv *priv = platform_get_drvdata(pdev); - unsigned int i, j; - - for (i = 0; i < MERAM_REGS_SIZE; i++) - priv->regs[i] = meram_read_reg(priv->base, common_regs[i]); - - for (i = 0; i < 32; i++) { - if (!test_bit(i, &priv->used_icb)) - continue; - for (j = 0; j < ICB_REGS_SIZE; j++) { - priv->icbs[i].regs[j] = - meram_read_icb(priv->base, i, icb_regs[j]); - /* Reset ICB on resume */ - if (icb_regs[j] == MExxCTL) - priv->icbs[i].regs[j] |= - MExxCTL_WBF | MExxCTL_WF | MExxCTL_RF; - } - } - return 0; -} - -static int sh_mobile_meram_resume(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct sh_mobile_meram_priv *priv = platform_get_drvdata(pdev); - unsigned int i, j; - - for (i = 0; i < 32; i++) { - if (!test_bit(i, &priv->used_icb)) - continue; - for (j = 0; j < ICB_REGS_SIZE; j++) - meram_write_icb(priv->base, i, icb_regs[j], - priv->icbs[i].regs[j]); - } - - for (i = 0; i < MERAM_REGS_SIZE; i++) - meram_write_reg(priv->base, common_regs[i], priv->regs[i]); - return 0; -} -#endif /* CONFIG_PM */ - -static UNIVERSAL_DEV_PM_OPS(sh_mobile_meram_dev_pm_ops, - sh_mobile_meram_suspend, - sh_mobile_meram_resume, NULL); - -/* ----------------------------------------------------------------------------- - * Probe/remove and driver init/exit - */ - -static int sh_mobile_meram_probe(struct platform_device *pdev) -{ - struct sh_mobile_meram_priv *priv; - struct sh_mobile_meram_info *pdata = pdev->dev.platform_data; - struct resource *regs; - struct resource *meram; - unsigned int i; - int error; - - if (!pdata) { - dev_err(&pdev->dev, "no platform data defined\n"); - return -EINVAL; - } - - regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); - meram = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (regs == NULL || meram == NULL) { - dev_err(&pdev->dev, "cannot get platform resources\n"); - return -ENOENT; - } - - priv = kzalloc(sizeof(*priv), GFP_KERNEL); - if (!priv) { - dev_err(&pdev->dev, "cannot allocate device data\n"); - return -ENOMEM; - } - - /* Initialize private data. */ - mutex_init(&priv->lock); - priv->used_icb = pdata->reserved_icbs; - - for (i = 0; i < MERAM_ICB_NUM; ++i) - priv->icbs[i].index = i; - - pdata->priv = priv; - pdata->pdev = pdev; - - /* Request memory regions and remap the registers. */ - if (!request_mem_region(regs->start, resource_size(regs), pdev->name)) { - dev_err(&pdev->dev, "MERAM registers region already claimed\n"); - error = -EBUSY; - goto err_req_regs; - } - - if (!request_mem_region(meram->start, resource_size(meram), - pdev->name)) { - dev_err(&pdev->dev, "MERAM memory region already claimed\n"); - error = -EBUSY; - goto err_req_meram; - } - - priv->base = ioremap_nocache(regs->start, resource_size(regs)); - if (!priv->base) { - dev_err(&pdev->dev, "ioremap failed\n"); - error = -EFAULT; - goto err_ioremap; - } - - priv->meram = meram->start; - - /* Create and initialize the MERAM memory pool. */ - priv->pool = gen_pool_create(ilog2(MERAM_GRANULARITY), -1); - if (priv->pool == NULL) { - error = -ENOMEM; - goto err_genpool; - } - - error = gen_pool_add(priv->pool, meram->start, resource_size(meram), - -1); - if (error < 0) - goto err_genpool; - - /* initialize ICB addressing mode */ - if (pdata->addr_mode == SH_MOBILE_MERAM_MODE1) - meram_write_reg(priv->base, MEVCR1, MEVCR1_AMD1); - - platform_set_drvdata(pdev, priv); - pm_runtime_enable(&pdev->dev); - - dev_info(&pdev->dev, "sh_mobile_meram initialized."); - - return 0; - -err_genpool: - if (priv->pool) - gen_pool_destroy(priv->pool); - iounmap(priv->base); -err_ioremap: - release_mem_region(meram->start, resource_size(meram)); -err_req_meram: - release_mem_region(regs->start, resource_size(regs)); -err_req_regs: - mutex_destroy(&priv->lock); - kfree(priv); - - return error; -} - - -static int sh_mobile_meram_remove(struct platform_device *pdev) -{ - struct sh_mobile_meram_priv *priv = platform_get_drvdata(pdev); - struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); - struct resource *meram = platform_get_resource(pdev, IORESOURCE_MEM, 1); - - pm_runtime_disable(&pdev->dev); - - gen_pool_destroy(priv->pool); - - iounmap(priv->base); - release_mem_region(meram->start, resource_size(meram)); - release_mem_region(regs->start, resource_size(regs)); - - mutex_destroy(&priv->lock); - - kfree(priv); - - return 0; -} - -static struct platform_driver sh_mobile_meram_driver = { - .driver = { - .name = "sh_mobile_meram", - .pm = &sh_mobile_meram_dev_pm_ops, - }, - .probe = sh_mobile_meram_probe, - .remove = sh_mobile_meram_remove, -}; - -module_platform_driver(sh_mobile_meram_driver); - -MODULE_DESCRIPTION("SuperH Mobile MERAM driver"); -MODULE_AUTHOR("Damian Hobson-Garcia / Takanari Hayama"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/video/fbdev/skeletonfb.c b/drivers/video/fbdev/skeletonfb.c index 7f4e908330bf..812a36cb60c3 100644 --- a/drivers/video/fbdev/skeletonfb.c +++ b/drivers/video/fbdev/skeletonfb.c @@ -836,7 +836,7 @@ static void xxxfb_remove(struct pci_dev *dev) * @dev: PCI device * @msg: the suspend event code. * - * See Documentation/power/admin-guide/devices.rst for more information + * See Documentation/driver-api/pm/devices.rst for more information */ static int xxxfb_suspend(struct pci_dev *dev, pm_message_t msg) { @@ -851,7 +851,7 @@ static int xxxfb_suspend(struct pci_dev *dev, pm_message_t msg) * xxxfb_resume - Optional but recommended function. Resume the device. * @dev: PCI device * - * See Documentation/power/admin-guide/devices.rst for more information + * See Documentation/driver-api/pm/devices.rst for more information */ static int xxxfb_resume(struct pci_dev *dev) { @@ -915,7 +915,7 @@ static void __exit xxxfb_exit(void) * @dev: platform device * @msg: the suspend event code. * - * See Documentation/power/admin-guide/devices.rst for more information + * See Documentation/driver-api/pm/devices.rst for more information */ static int xxxfb_suspend(struct platform_device *dev, pm_message_t msg) { @@ -930,7 +930,7 @@ static int xxxfb_suspend(struct platform_device *dev, pm_message_t msg) * xxxfb_resume - Optional but recommended function. Resume the device. * @dev: platform device * - * See Documentation/power/admin-guide/devices.rst for more information + * See Documentation/driver-api/pm/devices.rst for more information */ static int xxxfb_resume(struct platform_dev *dev) { diff --git a/drivers/video/fbdev/sm501fb.c b/drivers/video/fbdev/sm501fb.c index 6f0a19501c6a..dde52d027416 100644 --- a/drivers/video/fbdev/sm501fb.c +++ b/drivers/video/fbdev/sm501fb.c @@ -1932,8 +1932,7 @@ static int sm501fb_probe(struct platform_device *pdev) int ret; /* allocate our framebuffers */ - - info = kzalloc(sizeof(struct sm501fb_info), GFP_KERNEL); + info = kzalloc(sizeof(*info), GFP_KERNEL); if (!info) { dev_err(dev, "failed to allocate state\n"); return -ENOMEM; diff --git a/drivers/video/fbdev/via/global.h b/drivers/video/fbdev/via/global.h index 275dbbbd6b81..649d2ca5516e 100644 --- a/drivers/video/fbdev/via/global.h +++ b/drivers/video/fbdev/via/global.h @@ -33,6 +33,12 @@ #include <linux/console.h> #include <linux/timer.h> +#ifdef CONFIG_X86 +#include <asm/olpc.h> +#else +#define machine_is_olpc(x) 0 +#endif + #include "debug.h" #include "viafbdev.h" diff --git a/drivers/video/fbdev/via/hw.c b/drivers/video/fbdev/via/hw.c index 22450908306c..48969c644599 100644 --- a/drivers/video/fbdev/via/hw.c +++ b/drivers/video/fbdev/via/hw.c @@ -20,7 +20,6 @@ */ #include <linux/via-core.h> -#include <asm/olpc.h> #include "global.h" #include "via_clock.h" diff --git a/drivers/video/fbdev/via/via-core.c b/drivers/video/fbdev/via/via-core.c index 77774d8abf94..b041eb27a9bf 100644 --- a/drivers/video/fbdev/via/via-core.c +++ b/drivers/video/fbdev/via/via-core.c @@ -17,7 +17,6 @@ #include <linux/platform_device.h> #include <linux/list.h> #include <linux/pm.h> -#include <asm/olpc.h> /* * The default port config. diff --git a/drivers/video/fbdev/via/via_clock.c b/drivers/video/fbdev/via/via_clock.c index bf269fa43977..3d0efdbaea58 100644 --- a/drivers/video/fbdev/via/via_clock.c +++ b/drivers/video/fbdev/via/via_clock.c @@ -25,7 +25,7 @@ #include <linux/kernel.h> #include <linux/via-core.h> -#include <asm/olpc.h> + #include "via_clock.h" #include "global.h" #include "debug.h" diff --git a/drivers/video/fbdev/via/viafbdev.c b/drivers/video/fbdev/via/viafbdev.c index 52f577b0669b..d2f785068ef4 100644 --- a/drivers/video/fbdev/via/viafbdev.c +++ b/drivers/video/fbdev/via/viafbdev.c @@ -25,7 +25,6 @@ #include <linux/stat.h> #include <linux/via-core.h> #include <linux/via_i2c.h> -#include <asm/olpc.h> #define _MASTER_FILE #include "global.h" diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt index 57a27c42b5ac..56df483de619 100644 --- a/fs/Kconfig.binfmt +++ b/fs/Kconfig.binfmt @@ -168,7 +168,7 @@ config BINFMT_MISC will automatically feed it to the correct interpreter. You can do other nice things, too. Read the file - <file:Documentation/binfmt_misc.txt> to learn how to use this + <file:Documentation/admin-guide/binfmt-misc.rst> to learn how to use this feature, <file:Documentation/admin-guide/java.rst> for information about how to include Java support. and <file:Documentation/admin-guide/mono.rst> for information about how to include Mono-based .NET support. diff --git a/fs/befs/ChangeLog b/fs/befs/ChangeLog index 16f2dfe8c2f7..aff7eec8f327 100644 --- a/fs/befs/ChangeLog +++ b/fs/befs/ChangeLog @@ -389,7 +389,7 @@ Version 0.4 (2001-10-28) (fs/nls/Config.in) * Added Configure.help entries for CONFIG_BEFS_FS and CONFIG_DEBUG_BEFS - (Documentation/Configure.help) + (currently at fs/befs/Kconfig) 2001-08-?? ========== diff --git a/fs/binfmt_misc.c b/fs/binfmt_misc.c index 4de191563261..4b5fff31ef27 100644 --- a/fs/binfmt_misc.c +++ b/fs/binfmt_misc.c @@ -4,7 +4,7 @@ * Copyright (C) 1997 Richard Günther * * binfmt_misc detects binaries via a magic or filename extension and invokes - * a specified wrapper. See Documentation/binfmt_misc.txt for more details. + * a specified wrapper. See Documentation/admin-guide/binfmt-misc.rst for more details. */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c index 116146022aa1..bfe999505815 100644 --- a/fs/cifs/cifs_debug.c +++ b/fs/cifs/cifs_debug.c @@ -126,6 +126,25 @@ static void cifs_debug_tcon(struct seq_file *m, struct cifs_tcon *tcon) seq_putc(m, '\n'); } +static void +cifs_dump_iface(struct seq_file *m, struct cifs_server_iface *iface) +{ + struct sockaddr_in *ipv4 = (struct sockaddr_in *)&iface->sockaddr; + struct sockaddr_in6 *ipv6 = (struct sockaddr_in6 *)&iface->sockaddr; + + seq_printf(m, "\t\tSpeed: %zu bps\n", iface->speed); + seq_puts(m, "\t\tCapabilities: "); + if (iface->rdma_capable) + seq_puts(m, "rdma "); + if (iface->rss_capable) + seq_puts(m, "rss "); + seq_putc(m, '\n'); + if (iface->sockaddr.ss_family == AF_INET) + seq_printf(m, "\t\tIPv4: %pI4\n", &ipv4->sin_addr); + else if (iface->sockaddr.ss_family == AF_INET6) + seq_printf(m, "\t\tIPv6: %pI6\n", &ipv6->sin6_addr); +} + static int cifs_debug_data_proc_show(struct seq_file *m, void *v) { struct list_head *tmp1, *tmp2, *tmp3; @@ -312,6 +331,16 @@ skip_rdma: mid_entry->mid); } spin_unlock(&GlobalMid_Lock); + + spin_lock(&ses->iface_lock); + if (ses->iface_count) + seq_printf(m, "\n\tServer interfaces: %zu\n", + ses->iface_count); + for (j = 0; j < ses->iface_count; j++) { + seq_printf(m, "\t%d)\n", j); + cifs_dump_iface(m, &ses->iface_list[j]); + } + spin_unlock(&ses->iface_lock); } } spin_unlock(&cifs_tcp_ses_lock); diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c index 937251cc61c0..ee2a8ec70056 100644 --- a/fs/cifs/cifsencrypt.c +++ b/fs/cifs/cifsencrypt.c @@ -37,7 +37,6 @@ #include <crypto/aead.h> int __cifs_calc_signature(struct smb_rqst *rqst, - int start, struct TCP_Server_Info *server, char *signature, struct shash_desc *shash) { @@ -45,16 +44,27 @@ int __cifs_calc_signature(struct smb_rqst *rqst, int rc; struct kvec *iov = rqst->rq_iov; int n_vec = rqst->rq_nvec; + int is_smb2 = server->vals->header_preamble_size == 0; - for (i = start; i < n_vec; i++) { + /* iov[0] is actual data and not the rfc1002 length for SMB2+ */ + if (is_smb2) { + if (iov[0].iov_len <= 4) + return -EIO; + i = 0; + } else { + if (n_vec < 2 || iov[0].iov_len != 4) + return -EIO; + i = 1; /* skip rfc1002 length */ + } + + for (; i < n_vec; i++) { if (iov[i].iov_len == 0) continue; if (iov[i].iov_base == NULL) { cifs_dbg(VFS, "null iovec entry\n"); return -EIO; } - if (i == 1 && iov[1].iov_len <= 4) - break; /* nothing to sign or corrupt header */ + rc = crypto_shash_update(shash, iov[i].iov_base, iov[i].iov_len); if (rc) { @@ -118,7 +128,7 @@ static int cifs_calc_signature(struct smb_rqst *rqst, return rc; } - return __cifs_calc_signature(rqst, 1, server, signature, + return __cifs_calc_signature(rqst, server, signature, &server->secmech.sdescmd5->shash); } diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index 1efa2e65bc1a..bd78da59a4fd 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -33,6 +33,9 @@ #define CIFS_MAGIC_NUMBER 0xFF534D42 /* the first four bytes of SMB PDUs */ +#define CIFS_PORT 445 +#define RFC1001_PORT 139 + /* * The sizes of various internal tables and strings */ @@ -312,6 +315,10 @@ struct smb_version_operations { /* send echo request */ int (*echo)(struct TCP_Server_Info *); /* create directory */ + int (*posix_mkdir)(const unsigned int xid, struct inode *inode, + umode_t mode, struct cifs_tcon *tcon, + const char *full_path, + struct cifs_sb_info *cifs_sb); int (*mkdir)(const unsigned int, struct cifs_tcon *, const char *, struct cifs_sb_info *); /* set info on created directory */ @@ -838,6 +845,13 @@ static inline void cifs_set_net_ns(struct TCP_Server_Info *srv, struct net *net) #endif +struct cifs_server_iface { + size_t speed; + unsigned int rdma_capable : 1; + unsigned int rss_capable : 1; + struct sockaddr_storage sockaddr; +}; + /* * Session structure. One of these for each uid session with a particular host */ @@ -875,6 +889,20 @@ struct cifs_ses { #ifdef CONFIG_CIFS_SMB311 __u8 preauth_sha_hash[SMB2_PREAUTH_HASH_SIZE]; #endif /* 3.1.1 */ + + /* + * Network interfaces available on the server this session is + * connected to. + * + * Other channels can be opened by connecting and binding this + * session to interfaces from this list. + * + * iface_lock should be taken when accessing any of these fields + */ + spinlock_t iface_lock; + struct cifs_server_iface *iface_list; + size_t iface_count; + unsigned long iface_last_update; /* jiffies */ }; static inline bool @@ -883,6 +911,14 @@ cap_unix(struct cifs_ses *ses) return ses->server->vals->cap_unix & ses->capabilities; } +struct cached_fid { + bool is_valid:1; /* Do we have a useable root fid */ + struct cifs_fid *fid; + struct mutex fid_mutex; + struct cifs_tcon *tcon; + struct work_struct lease_break; +}; + /* * there is one of these for each connection to a resource on a particular * session @@ -987,9 +1023,7 @@ struct cifs_tcon { struct fscache_cookie *fscache; /* cookie for share */ #endif struct list_head pending_opens; /* list of incomplete opens */ - bool valid_root_fid:1; /* Do we have a useable root fid */ - struct mutex prfid_mutex; /* prevents reopen race after dead ses*/ - struct cifs_fid *prfid; /* handle to the directory at top of share */ + struct cached_fid crfid; /* Cached root fid */ /* BB add field for back pointer to sb struct(s)? */ }; diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 4e0d183c3d10..03018be17283 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -112,10 +112,6 @@ extern int SendReceive2(const unsigned int /* xid */ , struct cifs_ses *, struct kvec *, int /* nvec to send */, int * /* type of buf returned */, const int flags, struct kvec * /* resp vec */); -extern int smb2_send_recv(const unsigned int xid, struct cifs_ses *pses, - struct kvec *pkvec, int nvec_to_send, - int *pbuftype, const int flags, - struct kvec *presp); extern int SendReceiveBlockingLock(const unsigned int xid, struct cifs_tcon *ptcon, struct smb_hdr *in_buf , @@ -544,7 +540,7 @@ int cifs_create_mf_symlink(unsigned int xid, struct cifs_tcon *tcon, struct cifs_sb_info *cifs_sb, const unsigned char *path, char *pbuf, unsigned int *pbytes_written); -int __cifs_calc_signature(struct smb_rqst *rqst, int start, +int __cifs_calc_signature(struct smb_rqst *rqst, struct TCP_Server_Info *server, char *signature, struct shash_desc *shash); enum securityEnum cifs_select_sectype(struct TCP_Server_Info *, @@ -552,6 +548,7 @@ enum securityEnum cifs_select_sectype(struct TCP_Server_Info *, struct cifs_aio_ctx *cifs_aio_ctx_alloc(void); void cifs_aio_ctx_release(struct kref *refcount); int setup_aio_ctx_iter(struct cifs_aio_ctx *ctx, struct iov_iter *iter, int rw); +void smb2_cached_lease_break(struct work_struct *work); int cifs_alloc_hash(const char *name, struct crypto_shash **shash, struct sdesc **sdesc); diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 42329b25877d..d352da325de3 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -107,10 +107,10 @@ cifs_mark_open_files_invalid(struct cifs_tcon *tcon) } spin_unlock(&tcon->open_file_lock); - mutex_lock(&tcon->prfid_mutex); - tcon->valid_root_fid = false; - memset(tcon->prfid, 0, sizeof(struct cifs_fid)); - mutex_unlock(&tcon->prfid_mutex); + mutex_lock(&tcon->crfid.fid_mutex); + tcon->crfid.is_valid = false; + memset(tcon->crfid.fid, 0, sizeof(struct cifs_fid)); + mutex_unlock(&tcon->crfid.fid_mutex); /* * BB Add call to invalidate_inodes(sb) for all superblocks mounted diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 96645a7d8f27..a57da1b88bdf 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -57,9 +57,6 @@ #include "smb2proto.h" #include "smbdirect.h" -#define CIFS_PORT 445 -#define RFC1001_PORT 139 - extern mempool_t *cifs_req_poolp; extern bool disable_legacy_dialects; @@ -3029,8 +3026,11 @@ cifs_get_tcon(struct cifs_ses *ses, struct smb_vol *volume_info) #ifdef CONFIG_CIFS_SMB311 if ((volume_info->linux_ext) && (ses->server->posix_ext_supported)) { - if (ses->server->vals->protocol_id == SMB311_PROT_ID) + if (ses->server->vals->protocol_id == SMB311_PROT_ID) { tcon->posix_extensions = true; + printk_once(KERN_WARNING + "SMB3.11 POSIX Extensions are experimental\n"); + } } #endif /* 311 */ diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index f4697f548a39..a2cfb33e85c1 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -1575,6 +1575,17 @@ int cifs_mkdir(struct inode *inode, struct dentry *direntry, umode_t mode) goto mkdir_out; } + server = tcon->ses->server; + +#ifdef CONFIG_CIFS_SMB311 + if ((server->ops->posix_mkdir) && (tcon->posix_extensions)) { + rc = server->ops->posix_mkdir(xid, inode, mode, tcon, full_path, + cifs_sb); + d_drop(direntry); /* for time being always refresh inode info */ + goto mkdir_out; + } +#endif /* SMB311 */ + if (cap_unix(tcon->ses) && (CIFS_UNIX_POSIX_PATH_OPS_CAP & le64_to_cpu(tcon->fsUnixInfo.Capability))) { rc = cifs_posix_mkdir(inode, direntry, mode, full_path, cifs_sb, @@ -1583,8 +1594,6 @@ int cifs_mkdir(struct inode *inode, struct dentry *direntry, umode_t mode) goto mkdir_out; } - server = tcon->ses->server; - if (!server->ops->mkdir) { rc = -ENOSYS; goto mkdir_out; diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index af29ade195c0..53e8362cbc4a 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -82,6 +82,7 @@ sesInfoAlloc(void) INIT_LIST_HEAD(&ret_buf->smb_ses_list); INIT_LIST_HEAD(&ret_buf->tcon_list); mutex_init(&ret_buf->session_mutex); + spin_lock_init(&ret_buf->iface_lock); } return ret_buf; } @@ -102,6 +103,7 @@ sesInfoFree(struct cifs_ses *buf_to_free) kfree(buf_to_free->user_name); kfree(buf_to_free->domainName); kzfree(buf_to_free->auth_key.response); + kfree(buf_to_free->iface_list); kzfree(buf_to_free); } @@ -117,8 +119,9 @@ tconInfoAlloc(void) INIT_LIST_HEAD(&ret_buf->openFileList); INIT_LIST_HEAD(&ret_buf->tcon_list); spin_lock_init(&ret_buf->open_file_lock); - mutex_init(&ret_buf->prfid_mutex); - ret_buf->prfid = kzalloc(sizeof(struct cifs_fid), GFP_KERNEL); + mutex_init(&ret_buf->crfid.fid_mutex); + ret_buf->crfid.fid = kzalloc(sizeof(struct cifs_fid), + GFP_KERNEL); #ifdef CONFIG_CIFS_STATS spin_lock_init(&ret_buf->stat_lock); #endif @@ -136,7 +139,7 @@ tconInfoFree(struct cifs_tcon *buf_to_free) atomic_dec(&tconInfoAllocCount); kfree(buf_to_free->nativeFileSystem); kzfree(buf_to_free->password); - kfree(buf_to_free->prfid); + kfree(buf_to_free->crfid.fid); kfree(buf_to_free); } diff --git a/fs/cifs/smb2misc.c b/fs/cifs/smb2misc.c index e2bec47c6845..3ff7cec2da81 100644 --- a/fs/cifs/smb2misc.c +++ b/fs/cifs/smb2misc.c @@ -454,7 +454,8 @@ cifs_convert_path_to_utf16(const char *from, struct cifs_sb_info *cifs_sb) #ifdef CONFIG_CIFS_SMB311 /* SMB311 POSIX extensions paths do not include leading slash */ else if (cifs_sb_master_tlink(cifs_sb) && - cifs_sb_master_tcon(cifs_sb)->posix_extensions) { + cifs_sb_master_tcon(cifs_sb)->posix_extensions && + (from[0] == '/')) { start_of_path = from + 1; } #endif /* 311 */ @@ -492,10 +493,11 @@ cifs_ses_oplock_break(struct work_struct *work) { struct smb2_lease_break_work *lw = container_of(work, struct smb2_lease_break_work, lease_break); - int rc; + int rc = 0; rc = SMB2_lease_break(0, tlink_tcon(lw->tlink), lw->lease_key, lw->lease_state); + cifs_dbg(FYI, "Lease release rc %d\n", rc); cifs_put_tlink(lw->tlink); kfree(lw); @@ -561,6 +563,7 @@ smb2_tcon_has_lease(struct cifs_tcon *tcon, struct smb2_lease_break *rsp, open->oplock = lease_state; } + return found; } @@ -603,6 +606,18 @@ smb2_is_valid_lease_break(char *buffer) return true; } spin_unlock(&tcon->open_file_lock); + + if (tcon->crfid.is_valid && + !memcmp(rsp->LeaseKey, + tcon->crfid.fid->lease_key, + SMB2_LEASE_KEY_SIZE)) { + INIT_WORK(&tcon->crfid.lease_break, + smb2_cached_lease_break); + queue_work(cifsiod_wq, + &tcon->crfid.lease_break); + spin_unlock(&cifs_tcp_ses_lock); + return true; + } } } } diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c index b15f5957d645..0356b5559c71 100644 --- a/fs/cifs/smb2ops.c +++ b/fs/cifs/smb2ops.c @@ -294,34 +294,191 @@ smb2_negotiate_rsize(struct cifs_tcon *tcon, struct smb_vol *volume_info) return rsize; } -#ifdef CONFIG_CIFS_STATS2 + +static int +parse_server_interfaces(struct network_interface_info_ioctl_rsp *buf, + size_t buf_len, + struct cifs_server_iface **iface_list, + size_t *iface_count) +{ + struct network_interface_info_ioctl_rsp *p; + struct sockaddr_in *addr4; + struct sockaddr_in6 *addr6; + struct iface_info_ipv4 *p4; + struct iface_info_ipv6 *p6; + struct cifs_server_iface *info; + ssize_t bytes_left; + size_t next = 0; + int nb_iface = 0; + int rc = 0; + + *iface_list = NULL; + *iface_count = 0; + + /* + * Fist pass: count and sanity check + */ + + bytes_left = buf_len; + p = buf; + while (bytes_left >= sizeof(*p)) { + nb_iface++; + next = le32_to_cpu(p->Next); + if (!next) { + bytes_left -= sizeof(*p); + break; + } + p = (struct network_interface_info_ioctl_rsp *)((u8 *)p+next); + bytes_left -= next; + } + + if (!nb_iface) { + cifs_dbg(VFS, "%s: malformed interface info\n", __func__); + rc = -EINVAL; + goto out; + } + + if (bytes_left || p->Next) + cifs_dbg(VFS, "%s: incomplete interface info\n", __func__); + + + /* + * Second pass: extract info to internal structure + */ + + *iface_list = kcalloc(nb_iface, sizeof(**iface_list), GFP_KERNEL); + if (!*iface_list) { + rc = -ENOMEM; + goto out; + } + + info = *iface_list; + bytes_left = buf_len; + p = buf; + while (bytes_left >= sizeof(*p)) { + info->speed = le64_to_cpu(p->LinkSpeed); + info->rdma_capable = le32_to_cpu(p->Capability & RDMA_CAPABLE); + info->rss_capable = le32_to_cpu(p->Capability & RSS_CAPABLE); + + cifs_dbg(FYI, "%s: adding iface %zu\n", __func__, *iface_count); + cifs_dbg(FYI, "%s: speed %zu bps\n", __func__, info->speed); + cifs_dbg(FYI, "%s: capabilities 0x%08x\n", __func__, + le32_to_cpu(p->Capability)); + + switch (p->Family) { + /* + * The kernel and wire socket structures have the same + * layout and use network byte order but make the + * conversion explicit in case either one changes. + */ + case INTERNETWORK: + addr4 = (struct sockaddr_in *)&info->sockaddr; + p4 = (struct iface_info_ipv4 *)p->Buffer; + addr4->sin_family = AF_INET; + memcpy(&addr4->sin_addr, &p4->IPv4Address, 4); + + /* [MS-SMB2] 2.2.32.5.1.1 Clients MUST ignore these */ + addr4->sin_port = cpu_to_be16(CIFS_PORT); + + cifs_dbg(FYI, "%s: ipv4 %pI4\n", __func__, + &addr4->sin_addr); + break; + case INTERNETWORKV6: + addr6 = (struct sockaddr_in6 *)&info->sockaddr; + p6 = (struct iface_info_ipv6 *)p->Buffer; + addr6->sin6_family = AF_INET6; + memcpy(&addr6->sin6_addr, &p6->IPv6Address, 16); + + /* [MS-SMB2] 2.2.32.5.1.2 Clients MUST ignore these */ + addr6->sin6_flowinfo = 0; + addr6->sin6_scope_id = 0; + addr6->sin6_port = cpu_to_be16(CIFS_PORT); + + cifs_dbg(FYI, "%s: ipv6 %pI6\n", __func__, + &addr6->sin6_addr); + break; + default: + cifs_dbg(VFS, + "%s: skipping unsupported socket family\n", + __func__); + goto next_iface; + } + + (*iface_count)++; + info++; +next_iface: + next = le32_to_cpu(p->Next); + if (!next) + break; + p = (struct network_interface_info_ioctl_rsp *)((u8 *)p+next); + bytes_left -= next; + } + + if (!*iface_count) { + rc = -EINVAL; + goto out; + } + +out: + if (rc) { + kfree(*iface_list); + *iface_count = 0; + *iface_list = NULL; + } + return rc; +} + + static int SMB3_request_interfaces(const unsigned int xid, struct cifs_tcon *tcon) { int rc; unsigned int ret_data_len = 0; - struct network_interface_info_ioctl_rsp *out_buf; + struct network_interface_info_ioctl_rsp *out_buf = NULL; + struct cifs_server_iface *iface_list; + size_t iface_count; + struct cifs_ses *ses = tcon->ses; rc = SMB2_ioctl(xid, tcon, NO_FILE_ID, NO_FILE_ID, FSCTL_QUERY_NETWORK_INTERFACE_INFO, true /* is_fsctl */, NULL /* no data input */, 0 /* no data input */, (char **)&out_buf, &ret_data_len); - if (rc != 0) + if (rc != 0) { cifs_dbg(VFS, "error %d on ioctl to get interface list\n", rc); - else if (ret_data_len < sizeof(struct network_interface_info_ioctl_rsp)) { - cifs_dbg(VFS, "server returned bad net interface info buf\n"); - rc = -EINVAL; - } else { - /* Dump info on first interface */ - cifs_dbg(FYI, "Adapter Capability 0x%x\t", - le32_to_cpu(out_buf->Capability)); - cifs_dbg(FYI, "Link Speed %lld\n", - le64_to_cpu(out_buf->LinkSpeed)); + goto out; } + + rc = parse_server_interfaces(out_buf, ret_data_len, + &iface_list, &iface_count); + if (rc) + goto out; + + spin_lock(&ses->iface_lock); + kfree(ses->iface_list); + ses->iface_list = iface_list; + ses->iface_count = iface_count; + ses->iface_last_update = jiffies; + spin_unlock(&ses->iface_lock); + +out: kfree(out_buf); return rc; } -#endif /* STATS2 */ + +void +smb2_cached_lease_break(struct work_struct *work) +{ + struct cached_fid *cfid = container_of(work, + struct cached_fid, lease_break); + mutex_lock(&cfid->fid_mutex); + if (cfid->is_valid) { + cifs_dbg(FYI, "clear cached root file handle\n"); + SMB2_close(0, cfid->tcon, cfid->fid->persistent_fid, + cfid->fid->volatile_fid); + cfid->is_valid = false; + } + mutex_unlock(&cfid->fid_mutex); +} /* * Open the directory at the root of a share @@ -331,13 +488,13 @@ int open_shroot(unsigned int xid, struct cifs_tcon *tcon, struct cifs_fid *pfid) struct cifs_open_parms oparams; int rc; __le16 srch_path = 0; /* Null - since an open of top of share */ - u8 oplock = SMB2_OPLOCK_LEVEL_NONE; + u8 oplock = SMB2_OPLOCK_LEVEL_II; - mutex_lock(&tcon->prfid_mutex); - if (tcon->valid_root_fid) { + mutex_lock(&tcon->crfid.fid_mutex); + if (tcon->crfid.is_valid) { cifs_dbg(FYI, "found a cached root file handle\n"); - memcpy(pfid, tcon->prfid, sizeof(struct cifs_fid)); - mutex_unlock(&tcon->prfid_mutex); + memcpy(pfid, tcon->crfid.fid, sizeof(struct cifs_fid)); + mutex_unlock(&tcon->crfid.fid_mutex); return 0; } @@ -350,10 +507,11 @@ int open_shroot(unsigned int xid, struct cifs_tcon *tcon, struct cifs_fid *pfid) rc = SMB2_open(xid, &oparams, &srch_path, &oplock, NULL, NULL, NULL); if (rc == 0) { - memcpy(tcon->prfid, pfid, sizeof(struct cifs_fid)); - tcon->valid_root_fid = true; + memcpy(tcon->crfid.fid, pfid, sizeof(struct cifs_fid)); + tcon->crfid.tcon = tcon; + tcon->crfid.is_valid = true; } - mutex_unlock(&tcon->prfid_mutex); + mutex_unlock(&tcon->crfid.fid_mutex); return rc; } @@ -383,9 +541,7 @@ smb3_qfs_tcon(const unsigned int xid, struct cifs_tcon *tcon) if (rc) return; -#ifdef CONFIG_CIFS_STATS2 SMB3_request_interfaces(xid, tcon); -#endif /* STATS2 */ SMB2_QFS_attr(xid, tcon, fid.persistent_fid, fid.volatile_fid, FS_ATTRIBUTE_INFORMATION); @@ -436,7 +592,7 @@ smb2_is_path_accessible(const unsigned int xid, struct cifs_tcon *tcon, struct cifs_open_parms oparms; struct cifs_fid fid; - if ((*full_path == 0) && tcon->valid_root_fid) + if ((*full_path == 0) && tcon->crfid.is_valid) return 0; utf16_path = cifs_convert_path_to_utf16(full_path, cifs_sb); @@ -2151,7 +2307,7 @@ fill_transform_hdr(struct smb2_transform_hdr *tr_hdr, unsigned int orig_len, struct smb_rqst *old_rq) { struct smb2_sync_hdr *shdr = - (struct smb2_sync_hdr *)old_rq->rq_iov[1].iov_base; + (struct smb2_sync_hdr *)old_rq->rq_iov[0].iov_base; memset(tr_hdr, 0, sizeof(struct smb2_transform_hdr)); tr_hdr->ProtocolId = SMB2_TRANSFORM_PROTO_NUM; @@ -2171,14 +2327,13 @@ static inline void smb2_sg_set_buf(struct scatterlist *sg, const void *buf, } /* Assumes: - * rqst->rq_iov[0] is rfc1002 length - * rqst->rq_iov[1] is tranform header - * rqst->rq_iov[2+] data to be encrypted/decrypted + * rqst->rq_iov[0] is transform header + * rqst->rq_iov[1+] data to be encrypted/decrypted */ static struct scatterlist * init_sg(struct smb_rqst *rqst, u8 *sign) { - unsigned int sg_len = rqst->rq_nvec + rqst->rq_npages; + unsigned int sg_len = rqst->rq_nvec + rqst->rq_npages + 1; unsigned int assoc_data_len = sizeof(struct smb2_transform_hdr) - 20; struct scatterlist *sg; unsigned int i; @@ -2189,10 +2344,10 @@ init_sg(struct smb_rqst *rqst, u8 *sign) return NULL; sg_init_table(sg, sg_len); - smb2_sg_set_buf(&sg[0], rqst->rq_iov[1].iov_base + 20, assoc_data_len); - for (i = 1; i < rqst->rq_nvec - 1; i++) - smb2_sg_set_buf(&sg[i], rqst->rq_iov[i+1].iov_base, - rqst->rq_iov[i+1].iov_len); + smb2_sg_set_buf(&sg[0], rqst->rq_iov[0].iov_base + 20, assoc_data_len); + for (i = 1; i < rqst->rq_nvec; i++) + smb2_sg_set_buf(&sg[i], rqst->rq_iov[i].iov_base, + rqst->rq_iov[i].iov_len); for (j = 0; i < sg_len - 1; i++, j++) { unsigned int len, offset; @@ -2224,18 +2379,17 @@ smb2_get_enc_key(struct TCP_Server_Info *server, __u64 ses_id, int enc, u8 *key) return 1; } /* - * Encrypt or decrypt @rqst message. @rqst has the following format: - * iov[0] - rfc1002 length - * iov[1] - transform header (associate data), - * iov[2-N] and pages - data to encrypt. - * On success return encrypted data in iov[2-N] and pages, leave iov[0-1] + * Encrypt or decrypt @rqst message. @rqst[0] has the following format: + * iov[0] - transform header (associate data), + * iov[1-N] - SMB2 header and pages - data to encrypt. + * On success return encrypted data in iov[1-N] and pages, leave iov[0] * untouched. */ static int crypt_message(struct TCP_Server_Info *server, struct smb_rqst *rqst, int enc) { struct smb2_transform_hdr *tr_hdr = - (struct smb2_transform_hdr *)rqst->rq_iov[1].iov_base; + (struct smb2_transform_hdr *)rqst->rq_iov[0].iov_base; unsigned int assoc_data_len = sizeof(struct smb2_transform_hdr) - 20; int rc = 0; struct scatterlist *sg; @@ -2323,10 +2477,6 @@ free_req: return rc; } -/* - * This is called from smb_send_rqst. At this point we have the rfc1002 - * header as the first element in the vector. - */ static int smb3_init_transform_rq(struct TCP_Server_Info *server, struct smb_rqst *new_rq, struct smb_rqst *old_rq) @@ -2335,7 +2485,7 @@ smb3_init_transform_rq(struct TCP_Server_Info *server, struct smb_rqst *new_rq, struct page **pages; struct smb2_transform_hdr *tr_hdr; unsigned int npages = old_rq->rq_npages; - unsigned int orig_len = get_rfc1002_length(old_rq->rq_iov[0].iov_base); + unsigned int orig_len; int i; int rc = -ENOMEM; @@ -2355,18 +2505,14 @@ smb3_init_transform_rq(struct TCP_Server_Info *server, struct smb_rqst *new_rq, goto err_free_pages; } - /* Make space for one extra iov to hold the transform header */ iov = kmalloc_array(old_rq->rq_nvec + 1, sizeof(struct kvec), GFP_KERNEL); if (!iov) goto err_free_pages; - /* copy all iovs from the old except the 1st one (rfc1002 length) */ - memcpy(&iov[2], &old_rq->rq_iov[1], - sizeof(struct kvec) * (old_rq->rq_nvec - 1)); - /* copy the rfc1002 iov */ - iov[0].iov_base = old_rq->rq_iov[0].iov_base; - iov[0].iov_len = old_rq->rq_iov[0].iov_len; + /* copy all iovs from the old */ + memcpy(&iov[1], &old_rq->rq_iov[0], + sizeof(struct kvec) * old_rq->rq_nvec); new_rq->rq_iov = iov; new_rq->rq_nvec = old_rq->rq_nvec + 1; @@ -2375,14 +2521,12 @@ smb3_init_transform_rq(struct TCP_Server_Info *server, struct smb_rqst *new_rq, if (!tr_hdr) goto err_free_iov; + orig_len = smb2_rqst_len(old_rq, false); + /* fill the 2nd iov with a transform header */ fill_transform_hdr(tr_hdr, orig_len, old_rq); - new_rq->rq_iov[1].iov_base = tr_hdr; - new_rq->rq_iov[1].iov_len = sizeof(struct smb2_transform_hdr); - - /* Update rfc1002 header */ - inc_rfc1001_len(new_rq->rq_iov[0].iov_base, - sizeof(struct smb2_transform_hdr)); + new_rq->rq_iov[0].iov_base = tr_hdr; + new_rq->rq_iov[0].iov_len = sizeof(struct smb2_transform_hdr); /* copy pages form the old */ for (i = 0; i < npages; i++) { @@ -2426,7 +2570,7 @@ smb3_free_transform_rq(struct smb_rqst *rqst) put_page(rqst->rq_pages[i]); kfree(rqst->rq_pages); /* free transform header */ - kfree(rqst->rq_iov[1].iov_base); + kfree(rqst->rq_iov[0].iov_base); kfree(rqst->rq_iov); } @@ -2443,19 +2587,17 @@ decrypt_raw_data(struct TCP_Server_Info *server, char *buf, unsigned int buf_data_size, struct page **pages, unsigned int npages, unsigned int page_data_size) { - struct kvec iov[3]; + struct kvec iov[2]; struct smb_rqst rqst = {NULL}; int rc; - iov[0].iov_base = NULL; - iov[0].iov_len = 0; - iov[1].iov_base = buf; - iov[1].iov_len = sizeof(struct smb2_transform_hdr); - iov[2].iov_base = buf + sizeof(struct smb2_transform_hdr); - iov[2].iov_len = buf_data_size; + iov[0].iov_base = buf; + iov[0].iov_len = sizeof(struct smb2_transform_hdr); + iov[1].iov_base = buf + sizeof(struct smb2_transform_hdr); + iov[1].iov_len = buf_data_size; rqst.rq_iov = iov; - rqst.rq_nvec = 3; + rqst.rq_nvec = 2; rqst.rq_pages = pages; rqst.rq_npages = npages; rqst.rq_pagesz = PAGE_SIZE; @@ -2467,7 +2609,7 @@ decrypt_raw_data(struct TCP_Server_Info *server, char *buf, if (rc) return rc; - memmove(buf, iov[2].iov_base, buf_data_size); + memmove(buf, iov[1].iov_base, buf_data_size); server->total_read = buf_data_size + page_data_size; @@ -3170,6 +3312,7 @@ struct smb_version_operations smb311_operations = { .set_compression = smb2_set_compression, .mkdir = smb2_mkdir, .mkdir_setinfo = smb2_mkdir_setinfo, + .posix_mkdir = smb311_posix_mkdir, .rmdir = smb2_rmdir, .unlink = smb2_unlink, .rename = smb2_rename_path, diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index af032e1a3eac..810b85787c91 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -602,6 +602,7 @@ static void assemble_neg_contexts(struct smb2_negotiate_req *req, int SMB2_negotiate(const unsigned int xid, struct cifs_ses *ses) { + struct smb_rqst rqst; struct smb2_negotiate_req *req; struct smb2_negotiate_rsp *rsp; struct kvec iov[1]; @@ -673,7 +674,11 @@ SMB2_negotiate(const unsigned int xid, struct cifs_ses *ses) iov[0].iov_base = (char *)req; iov[0].iov_len = total_len; - rc = smb2_send_recv(xid, ses, iov, 1, &resp_buftype, flags, &rsp_iov); + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = 1; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buftype, flags, &rsp_iov); cifs_small_buf_release(req); rsp = (struct smb2_negotiate_rsp *)rsp_iov.iov_base; /* @@ -990,8 +995,9 @@ SMB2_sess_alloc_buffer(struct SMB2_sess_data *sess_data) req->PreviousSessionId = sess_data->previous_session; req->Flags = 0; /* MBZ */ - /* to enable echos and oplocks */ - req->sync_hdr.CreditRequest = cpu_to_le16(3); + + /* enough to enable echos and oplocks and one max size write */ + req->sync_hdr.CreditRequest = cpu_to_le16(130); /* only one of SMB2 signing flags may be set in SMB2 request */ if (server->sign) @@ -1027,6 +1033,7 @@ static int SMB2_sess_sendreceive(struct SMB2_sess_data *sess_data) { int rc; + struct smb_rqst rqst; struct smb2_sess_setup_req *req = sess_data->iov[0].iov_base; struct kvec rsp_iov = { NULL, 0 }; @@ -1035,10 +1042,13 @@ SMB2_sess_sendreceive(struct SMB2_sess_data *sess_data) cpu_to_le16(sizeof(struct smb2_sess_setup_req) - 1 /* pad */); req->SecurityBufferLength = cpu_to_le16(sess_data->iov[1].iov_len); - /* BB add code to build os and lm fields */ + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = sess_data->iov; + rqst.rq_nvec = 2; - rc = smb2_send_recv(sess_data->xid, sess_data->ses, - sess_data->iov, 2, + /* BB add code to build os and lm fields */ + rc = cifs_send_recv(sess_data->xid, sess_data->ses, + &rqst, &sess_data->buf0_type, CIFS_LOG_ERROR | CIFS_NEG_OP, &rsp_iov); cifs_small_buf_release(sess_data->iov[0].iov_base); @@ -1376,6 +1386,7 @@ out: int SMB2_logoff(const unsigned int xid, struct cifs_ses *ses) { + struct smb_rqst rqst; struct smb2_logoff_req *req; /* response is also trivial struct */ int rc = 0; struct TCP_Server_Info *server; @@ -1413,7 +1424,11 @@ SMB2_logoff(const unsigned int xid, struct cifs_ses *ses) iov[0].iov_base = (char *)req; iov[0].iov_len = total_len; - rc = smb2_send_recv(xid, ses, iov, 1, &resp_buf_type, flags, &rsp_iov); + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = 1; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buf_type, flags, &rsp_iov); cifs_small_buf_release(req); /* * No tcon so can't do @@ -1443,6 +1458,7 @@ int SMB2_tcon(const unsigned int xid, struct cifs_ses *ses, const char *tree, struct cifs_tcon *tcon, const struct nls_table *cp) { + struct smb_rqst rqst; struct smb2_tree_connect_req *req; struct smb2_tree_connect_rsp *rsp = NULL; struct kvec iov[2]; @@ -1499,7 +1515,11 @@ SMB2_tcon(const unsigned int xid, struct cifs_ses *ses, const char *tree, !smb3_encryption_required(tcon)) req->sync_hdr.Flags |= SMB2_FLAGS_SIGNED; - rc = smb2_send_recv(xid, ses, iov, 2, &resp_buftype, flags, &rsp_iov); + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = 2; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buftype, flags, &rsp_iov); cifs_small_buf_release(req); rsp = (struct smb2_tree_connect_rsp *)rsp_iov.iov_base; @@ -1563,6 +1583,7 @@ tcon_error_exit: int SMB2_tdis(const unsigned int xid, struct cifs_tcon *tcon) { + struct smb_rqst rqst; struct smb2_tree_disconnect_req *req; /* response is trivial */ int rc = 0; struct cifs_ses *ses = tcon->ses; @@ -1593,7 +1614,11 @@ SMB2_tdis(const unsigned int xid, struct cifs_tcon *tcon) iov[0].iov_base = (char *)req; iov[0].iov_len = total_len; - rc = smb2_send_recv(xid, ses, iov, 1, &resp_buf_type, flags, &rsp_iov); + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = 1; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buf_type, flags, &rsp_iov); cifs_small_buf_release(req); if (rc) cifs_stats_fail_inc(tcon, SMB2_TREE_DISCONNECT_HE); @@ -1886,11 +1911,165 @@ alloc_path_with_tree_prefix(__le16 **out_path, int *out_size, int *out_len, return 0; } +#ifdef CONFIG_CIFS_SMB311 +int smb311_posix_mkdir(const unsigned int xid, struct inode *inode, + umode_t mode, struct cifs_tcon *tcon, + const char *full_path, + struct cifs_sb_info *cifs_sb) +{ + struct smb_rqst rqst; + struct smb2_create_req *req; + struct smb2_create_rsp *rsp; + struct TCP_Server_Info *server; + struct cifs_ses *ses = tcon->ses; + struct kvec iov[3]; /* make sure at least one for each open context */ + struct kvec rsp_iov = {NULL, 0}; + int resp_buftype; + int uni_path_len; + __le16 *copy_path = NULL; + int copy_size; + int rc = 0; + unsigned int n_iov = 2; + __u32 file_attributes = 0; + char *pc_buf = NULL; + int flags = 0; + unsigned int total_len; + __le16 *path = cifs_convert_path_to_utf16(full_path, cifs_sb); + + if (!path) + return -ENOMEM; + + cifs_dbg(FYI, "mkdir\n"); + + if (ses && (ses->server)) + server = ses->server; + else + return -EIO; + + rc = smb2_plain_req_init(SMB2_CREATE, tcon, (void **) &req, &total_len); + + if (rc) + return rc; + + if (smb3_encryption_required(tcon)) + flags |= CIFS_TRANSFORM_REQ; + + + req->ImpersonationLevel = IL_IMPERSONATION; + req->DesiredAccess = cpu_to_le32(FILE_WRITE_ATTRIBUTES); + /* File attributes ignored on open (used in create though) */ + req->FileAttributes = cpu_to_le32(file_attributes); + req->ShareAccess = FILE_SHARE_ALL_LE; + req->CreateDisposition = cpu_to_le32(FILE_CREATE); + req->CreateOptions = cpu_to_le32(CREATE_NOT_FILE); + + iov[0].iov_base = (char *)req; + /* -1 since last byte is buf[0] which is sent below (path) */ + iov[0].iov_len = total_len - 1; + + req->NameOffset = cpu_to_le16(sizeof(struct smb2_create_req)); + + /* [MS-SMB2] 2.2.13 NameOffset: + * If SMB2_FLAGS_DFS_OPERATIONS is set in the Flags field of + * the SMB2 header, the file name includes a prefix that will + * be processed during DFS name normalization as specified in + * section 3.3.5.9. Otherwise, the file name is relative to + * the share that is identified by the TreeId in the SMB2 + * header. + */ + if (tcon->share_flags & SHI1005_FLAGS_DFS) { + int name_len; + + req->sync_hdr.Flags |= SMB2_FLAGS_DFS_OPERATIONS; + rc = alloc_path_with_tree_prefix(©_path, ©_size, + &name_len, + tcon->treeName, path); + if (rc) { + cifs_small_buf_release(req); + return rc; + } + req->NameLength = cpu_to_le16(name_len * 2); + uni_path_len = copy_size; + path = copy_path; + } else { + uni_path_len = (2 * UniStrnlen((wchar_t *)path, PATH_MAX)) + 2; + /* MUST set path len (NameLength) to 0 opening root of share */ + req->NameLength = cpu_to_le16(uni_path_len - 2); + if (uni_path_len % 8 != 0) { + copy_size = roundup(uni_path_len, 8); + copy_path = kzalloc(copy_size, GFP_KERNEL); + if (!copy_path) { + cifs_small_buf_release(req); + return -ENOMEM; + } + memcpy((char *)copy_path, (const char *)path, + uni_path_len); + uni_path_len = copy_size; + path = copy_path; + } + } + + iov[1].iov_len = uni_path_len; + iov[1].iov_base = path; + req->RequestedOplockLevel = SMB2_OPLOCK_LEVEL_NONE; + + if (tcon->posix_extensions) { + if (n_iov > 2) { + struct create_context *ccontext = + (struct create_context *)iov[n_iov-1].iov_base; + ccontext->Next = + cpu_to_le32(iov[n_iov-1].iov_len); + } + + rc = add_posix_context(iov, &n_iov, mode); + if (rc) { + cifs_small_buf_release(req); + kfree(copy_path); + return rc; + } + pc_buf = iov[n_iov-1].iov_base; + } + + + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = n_iov; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buftype, flags, + &rsp_iov); + + cifs_small_buf_release(req); + rsp = (struct smb2_create_rsp *)rsp_iov.iov_base; + + if (rc != 0) { + cifs_stats_fail_inc(tcon, SMB2_CREATE_HE); + trace_smb3_posix_mkdir_err(xid, tcon->tid, ses->Suid, + CREATE_NOT_FILE, FILE_WRITE_ATTRIBUTES, rc); + goto smb311_mkdir_exit; + } else + trace_smb3_posix_mkdir_done(xid, rsp->PersistentFileId, tcon->tid, + ses->Suid, CREATE_NOT_FILE, + FILE_WRITE_ATTRIBUTES); + + SMB2_close(xid, tcon, rsp->PersistentFileId, rsp->VolatileFileId); + + /* Eventually save off posix specific response info and timestaps */ + +smb311_mkdir_exit: + kfree(copy_path); + kfree(pc_buf); + free_rsp_buf(resp_buftype, rsp); + return rc; + +} +#endif /* SMB311 */ + int SMB2_open(const unsigned int xid, struct cifs_open_parms *oparms, __le16 *path, __u8 *oplock, struct smb2_file_all_info *buf, struct kvec *err_iov, int *buftype) { + struct smb_rqst rqst; struct smb2_create_req *req; struct smb2_create_rsp *rsp; struct TCP_Server_Info *server; @@ -2043,7 +2222,11 @@ SMB2_open(const unsigned int xid, struct cifs_open_parms *oparms, __le16 *path, } #endif /* SMB311 */ - rc = smb2_send_recv(xid, ses, iov, n_iov, &resp_buftype, flags, + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = n_iov; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buftype, flags, &rsp_iov); cifs_small_buf_release(req); rsp = (struct smb2_create_rsp *)rsp_iov.iov_base; @@ -2099,6 +2282,7 @@ SMB2_ioctl(const unsigned int xid, struct cifs_tcon *tcon, u64 persistent_fid, char *in_data, u32 indatalen, char **out_data, u32 *plen /* returned data len */) { + struct smb_rqst rqst; struct smb2_ioctl_req *req; struct smb2_ioctl_rsp *rsp; struct cifs_ses *ses; @@ -2189,7 +2373,11 @@ SMB2_ioctl(const unsigned int xid, struct cifs_tcon *tcon, u64 persistent_fid, if (opcode == FSCTL_VALIDATE_NEGOTIATE_INFO) req->sync_hdr.Flags |= SMB2_FLAGS_SIGNED; - rc = smb2_send_recv(xid, ses, iov, n_iov, &resp_buftype, flags, + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = n_iov; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buftype, flags, &rsp_iov); cifs_small_buf_release(req); rsp = (struct smb2_ioctl_rsp *)rsp_iov.iov_base; @@ -2274,6 +2462,7 @@ int SMB2_close_flags(const unsigned int xid, struct cifs_tcon *tcon, u64 persistent_fid, u64 volatile_fid, int flags) { + struct smb_rqst rqst; struct smb2_close_req *req; struct smb2_close_rsp *rsp; struct cifs_ses *ses = tcon->ses; @@ -2301,7 +2490,11 @@ SMB2_close_flags(const unsigned int xid, struct cifs_tcon *tcon, iov[0].iov_base = (char *)req; iov[0].iov_len = total_len; - rc = smb2_send_recv(xid, ses, iov, 1, &resp_buftype, flags, &rsp_iov); + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = 1; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buftype, flags, &rsp_iov); cifs_small_buf_release(req); rsp = (struct smb2_close_rsp *)rsp_iov.iov_base; @@ -2387,6 +2580,7 @@ query_info(const unsigned int xid, struct cifs_tcon *tcon, u32 additional_info, size_t output_len, size_t min_len, void **data, u32 *dlen) { + struct smb_rqst rqst; struct smb2_query_info_req *req; struct smb2_query_info_rsp *rsp = NULL; struct kvec iov[2]; @@ -2427,7 +2621,11 @@ query_info(const unsigned int xid, struct cifs_tcon *tcon, /* 1 for Buffer */ iov[0].iov_len = total_len - 1; - rc = smb2_send_recv(xid, ses, iov, 1, &resp_buftype, flags, &rsp_iov); + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = 1; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buftype, flags, &rsp_iov); cifs_small_buf_release(req); rsp = (struct smb2_query_info_rsp *)rsp_iov.iov_base; @@ -2594,11 +2792,10 @@ SMB2_echo(struct TCP_Server_Info *server) { struct smb2_echo_req *req; int rc = 0; - struct kvec iov[2]; + struct kvec iov[1]; struct smb_rqst rqst = { .rq_iov = iov, - .rq_nvec = 2 }; + .rq_nvec = 1 }; unsigned int total_len; - __be32 rfc1002_marker; cifs_dbg(FYI, "In echo request\n"); @@ -2614,11 +2811,8 @@ SMB2_echo(struct TCP_Server_Info *server) req->sync_hdr.CreditRequest = cpu_to_le16(1); - iov[0].iov_len = 4; - rfc1002_marker = cpu_to_be32(total_len); - iov[0].iov_base = &rfc1002_marker; - iov[1].iov_len = total_len; - iov[1].iov_base = (char *)req; + iov[0].iov_len = total_len; + iov[0].iov_base = (char *)req; rc = cifs_call_async(server, &rqst, NULL, smb2_echo_callback, NULL, server, CIFS_ECHO_OP); @@ -2633,6 +2827,7 @@ int SMB2_flush(const unsigned int xid, struct cifs_tcon *tcon, u64 persistent_fid, u64 volatile_fid) { + struct smb_rqst rqst; struct smb2_flush_req *req; struct cifs_ses *ses = tcon->ses; struct kvec iov[1]; @@ -2660,7 +2855,11 @@ SMB2_flush(const unsigned int xid, struct cifs_tcon *tcon, u64 persistent_fid, iov[0].iov_base = (char *)req; iov[0].iov_len = total_len; - rc = smb2_send_recv(xid, ses, iov, 1, &resp_buftype, flags, &rsp_iov); + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = 1; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buftype, flags, &rsp_iov); cifs_small_buf_release(req); if (rc != 0) { @@ -2848,10 +3047,9 @@ smb2_async_readv(struct cifs_readdata *rdata) struct smb2_sync_hdr *shdr; struct cifs_io_parms io_parms; struct smb_rqst rqst = { .rq_iov = rdata->iov, - .rq_nvec = 2 }; + .rq_nvec = 1 }; struct TCP_Server_Info *server; unsigned int total_len; - __be32 req_len; cifs_dbg(FYI, "%s: offset=%llu bytes=%u\n", __func__, rdata->offset, rdata->bytes); @@ -2882,12 +3080,8 @@ smb2_async_readv(struct cifs_readdata *rdata) if (smb3_encryption_required(io_parms.tcon)) flags |= CIFS_TRANSFORM_REQ; - req_len = cpu_to_be32(total_len); - - rdata->iov[0].iov_base = &req_len; - rdata->iov[0].iov_len = sizeof(__be32); - rdata->iov[1].iov_base = buf; - rdata->iov[1].iov_len = total_len; + rdata->iov[0].iov_base = buf; + rdata->iov[0].iov_len = total_len; shdr = (struct smb2_sync_hdr *)buf; @@ -2926,6 +3120,7 @@ int SMB2_read(const unsigned int xid, struct cifs_io_parms *io_parms, unsigned int *nbytes, char **buf, int *buf_type) { + struct smb_rqst rqst; int resp_buftype, rc = -EACCES; struct smb2_read_plain_req *req = NULL; struct smb2_read_rsp *rsp = NULL; @@ -2946,7 +3141,11 @@ SMB2_read(const unsigned int xid, struct cifs_io_parms *io_parms, iov[0].iov_base = (char *)req; iov[0].iov_len = total_len; - rc = smb2_send_recv(xid, ses, iov, 1, &resp_buftype, flags, &rsp_iov); + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = 1; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buftype, flags, &rsp_iov); cifs_small_buf_release(req); rsp = (struct smb2_read_rsp *)rsp_iov.iov_base; @@ -3062,10 +3261,9 @@ smb2_async_writev(struct cifs_writedata *wdata, struct smb2_sync_hdr *shdr; struct cifs_tcon *tcon = tlink_tcon(wdata->cfile->tlink); struct TCP_Server_Info *server = tcon->ses->server; - struct kvec iov[2]; + struct kvec iov[1]; struct smb_rqst rqst = { }; unsigned int total_len; - __be32 rfc1002_marker; rc = smb2_plain_req_init(SMB2_WRITE, tcon, (void **) &req, &total_len); if (rc) { @@ -3137,15 +3335,11 @@ smb2_async_writev(struct cifs_writedata *wdata, v1->length = cpu_to_le32(wdata->mr->mr->length); } #endif - /* 4 for rfc1002 length field and 1 for Buffer */ - iov[0].iov_len = 4; - rfc1002_marker = cpu_to_be32(total_len - 1 + wdata->bytes); - iov[0].iov_base = &rfc1002_marker; - iov[1].iov_len = total_len - 1; - iov[1].iov_base = (char *)req; + iov[0].iov_len = total_len - 1; + iov[0].iov_base = (char *)req; rqst.rq_iov = iov; - rqst.rq_nvec = 2; + rqst.rq_nvec = 1; rqst.rq_pages = wdata->pages; rqst.rq_offset = wdata->page_offset; rqst.rq_npages = wdata->nr_pages; @@ -3153,7 +3347,7 @@ smb2_async_writev(struct cifs_writedata *wdata, rqst.rq_tailsz = wdata->tailsz; #ifdef CONFIG_CIFS_SMB_DIRECT if (wdata->mr) { - iov[1].iov_len += sizeof(struct smbd_buffer_descriptor_v1); + iov[0].iov_len += sizeof(struct smbd_buffer_descriptor_v1); rqst.rq_npages = 0; } #endif @@ -3210,6 +3404,7 @@ int SMB2_write(const unsigned int xid, struct cifs_io_parms *io_parms, unsigned int *nbytes, struct kvec *iov, int n_vec) { + struct smb_rqst rqst; int rc = 0; struct smb2_write_req *req = NULL; struct smb2_write_rsp *rsp = NULL; @@ -3251,7 +3446,11 @@ SMB2_write(const unsigned int xid, struct cifs_io_parms *io_parms, /* 1 for Buffer */ iov[0].iov_len = total_len - 1; - rc = smb2_send_recv(xid, io_parms->tcon->ses, iov, n_vec + 1, + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = n_vec + 1; + + rc = cifs_send_recv(xid, io_parms->tcon->ses, &rqst, &resp_buftype, flags, &rsp_iov); cifs_small_buf_release(req); rsp = (struct smb2_write_rsp *)rsp_iov.iov_base; @@ -3323,6 +3522,7 @@ SMB2_query_directory(const unsigned int xid, struct cifs_tcon *tcon, u64 persistent_fid, u64 volatile_fid, int index, struct cifs_search_info *srch_inf) { + struct smb_rqst rqst; struct smb2_query_directory_req *req; struct smb2_query_directory_rsp *rsp = NULL; struct kvec iov[2]; @@ -3395,7 +3595,11 @@ SMB2_query_directory(const unsigned int xid, struct cifs_tcon *tcon, iov[1].iov_base = (char *)(req->Buffer); iov[1].iov_len = len; - rc = smb2_send_recv(xid, ses, iov, 2, &resp_buftype, flags, &rsp_iov); + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = 2; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buftype, flags, &rsp_iov); cifs_small_buf_release(req); rsp = (struct smb2_query_directory_rsp *)rsp_iov.iov_base; @@ -3454,6 +3658,7 @@ send_set_info(const unsigned int xid, struct cifs_tcon *tcon, u8 info_type, u32 additional_info, unsigned int num, void **data, unsigned int *size) { + struct smb_rqst rqst; struct smb2_set_info_req *req; struct smb2_set_info_rsp *rsp = NULL; struct kvec *iov; @@ -3509,7 +3714,11 @@ send_set_info(const unsigned int xid, struct cifs_tcon *tcon, iov[i].iov_len = size[i]; } - rc = smb2_send_recv(xid, ses, iov, num, &resp_buftype, flags, + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = num; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buftype, flags, &rsp_iov); cifs_small_buf_release(req); rsp = (struct smb2_set_info_rsp *)rsp_iov.iov_base; @@ -3664,6 +3873,7 @@ SMB2_oplock_break(const unsigned int xid, struct cifs_tcon *tcon, const u64 persistent_fid, const u64 volatile_fid, __u8 oplock_level) { + struct smb_rqst rqst; int rc; struct smb2_oplock_break *req = NULL; struct cifs_ses *ses = tcon->ses; @@ -3692,7 +3902,11 @@ SMB2_oplock_break(const unsigned int xid, struct cifs_tcon *tcon, iov[0].iov_base = (char *)req; iov[0].iov_len = total_len; - rc = smb2_send_recv(xid, ses, iov, 1, &resp_buf_type, flags, &rsp_iov); + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = 1; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buf_type, flags, &rsp_iov); cifs_small_buf_release(req); if (rc) { @@ -3755,6 +3969,7 @@ int SMB2_QFS_info(const unsigned int xid, struct cifs_tcon *tcon, u64 persistent_fid, u64 volatile_fid, struct kstatfs *fsdata) { + struct smb_rqst rqst; struct smb2_query_info_rsp *rsp = NULL; struct kvec iov; struct kvec rsp_iov; @@ -3773,7 +3988,11 @@ SMB2_QFS_info(const unsigned int xid, struct cifs_tcon *tcon, if (smb3_encryption_required(tcon)) flags |= CIFS_TRANSFORM_REQ; - rc = smb2_send_recv(xid, ses, &iov, 1, &resp_buftype, flags, &rsp_iov); + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = &iov; + rqst.rq_nvec = 1; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buftype, flags, &rsp_iov); cifs_small_buf_release(iov.iov_base); if (rc) { cifs_stats_fail_inc(tcon, SMB2_QUERY_INFO_HE); @@ -3798,6 +4017,7 @@ int SMB2_QFS_attr(const unsigned int xid, struct cifs_tcon *tcon, u64 persistent_fid, u64 volatile_fid, int level) { + struct smb_rqst rqst; struct smb2_query_info_rsp *rsp = NULL; struct kvec iov; struct kvec rsp_iov; @@ -3829,7 +4049,11 @@ SMB2_QFS_attr(const unsigned int xid, struct cifs_tcon *tcon, if (smb3_encryption_required(tcon)) flags |= CIFS_TRANSFORM_REQ; - rc = smb2_send_recv(xid, ses, &iov, 1, &resp_buftype, flags, &rsp_iov); + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = &iov; + rqst.rq_nvec = 1; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buftype, flags, &rsp_iov); cifs_small_buf_release(iov.iov_base); if (rc) { cifs_stats_fail_inc(tcon, SMB2_QUERY_INFO_HE); @@ -3868,6 +4092,7 @@ smb2_lockv(const unsigned int xid, struct cifs_tcon *tcon, const __u64 persist_fid, const __u64 volatile_fid, const __u32 pid, const __u32 num_lock, struct smb2_lock_element *buf) { + struct smb_rqst rqst; int rc = 0; struct smb2_lock_req *req = NULL; struct kvec iov[2]; @@ -3900,7 +4125,12 @@ smb2_lockv(const unsigned int xid, struct cifs_tcon *tcon, iov[1].iov_len = count; cifs_stats_inc(&tcon->stats.cifs_stats.num_locks); - rc = smb2_send_recv(xid, tcon->ses, iov, 2, &resp_buf_type, flags, + + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = 2; + + rc = cifs_send_recv(xid, tcon->ses, &rqst, &resp_buf_type, flags, &rsp_iov); cifs_small_buf_release(req); if (rc) { @@ -3934,6 +4164,7 @@ int SMB2_lease_break(const unsigned int xid, struct cifs_tcon *tcon, __u8 *lease_key, const __le32 lease_state) { + struct smb_rqst rqst; int rc; struct smb2_lease_ack *req = NULL; struct cifs_ses *ses = tcon->ses; @@ -3964,7 +4195,11 @@ SMB2_lease_break(const unsigned int xid, struct cifs_tcon *tcon, iov[0].iov_base = (char *)req; iov[0].iov_len = total_len; - rc = smb2_send_recv(xid, ses, iov, 1, &resp_buf_type, flags, &rsp_iov); + memset(&rqst, 0, sizeof(struct smb_rqst)); + rqst.rq_iov = iov; + rqst.rq_nvec = 1; + + rc = cifs_send_recv(xid, ses, &rqst, &resp_buf_type, flags, &rsp_iov); cifs_small_buf_release(req); if (rc) { diff --git a/fs/cifs/smb2pdu.h b/fs/cifs/smb2pdu.h index a345560001ce..824dddeee3f2 100644 --- a/fs/cifs/smb2pdu.h +++ b/fs/cifs/smb2pdu.h @@ -851,8 +851,11 @@ struct validate_negotiate_info_rsp { __le16 Dialect; /* Dialect in use for the connection */ } __packed; -#define RSS_CAPABLE 0x00000001 -#define RDMA_CAPABLE 0x00000002 +#define RSS_CAPABLE cpu_to_le32(0x00000001) +#define RDMA_CAPABLE cpu_to_le32(0x00000002) + +#define INTERNETWORK cpu_to_le16(0x0002) +#define INTERNETWORKV6 cpu_to_le16(0x0017) struct network_interface_info_ioctl_rsp { __le32 Next; /* next interface. zero if this is last one */ @@ -860,7 +863,21 @@ struct network_interface_info_ioctl_rsp { __le32 Capability; /* RSS or RDMA Capable */ __le32 Reserved; __le64 LinkSpeed; - char SockAddr_Storage[128]; + __le16 Family; + __u8 Buffer[126]; +} __packed; + +struct iface_info_ipv4 { + __be16 Port; + __be32 IPv4Address; + __be64 Reserved; +} __packed; + +struct iface_info_ipv6 { + __be16 Port; + __be32 FlowInfo; + __u8 IPv6Address[16]; + __be32 ScopeId; } __packed; #define NO_FILE_ID 0xFFFFFFFFFFFFFFFFULL /* general ioctls to srv not to file */ diff --git a/fs/cifs/smb2proto.h b/fs/cifs/smb2proto.h index c84020057bd8..3ae208ac2a77 100644 --- a/fs/cifs/smb2proto.h +++ b/fs/cifs/smb2proto.h @@ -79,6 +79,10 @@ extern int smb2_set_path_size(const unsigned int xid, struct cifs_tcon *tcon, struct cifs_sb_info *cifs_sb, bool set_alloc); extern int smb2_set_file_info(struct inode *inode, const char *full_path, FILE_BASIC_INFO *buf, const unsigned int xid); +extern int smb311_posix_mkdir(const unsigned int xid, struct inode *inode, + umode_t mode, struct cifs_tcon *tcon, + const char *full_path, + struct cifs_sb_info *cifs_sb); extern int smb2_mkdir(const unsigned int xid, struct cifs_tcon *tcon, const char *name, struct cifs_sb_info *cifs_sb); extern void smb2_mkdir_setinfo(struct inode *inode, const char *full_path, @@ -109,6 +113,8 @@ extern int smb2_unlock_range(struct cifsFileInfo *cfile, extern int smb2_push_mandatory_locks(struct cifsFileInfo *cfile); extern void smb2_reconnect_server(struct work_struct *work); extern int smb3_crypto_aead_allocate(struct TCP_Server_Info *server); +extern unsigned long +smb2_rqst_len(struct smb_rqst *rqst, bool skip_rfc1002_marker); /* * SMB2 Worker functions - most of protocol specific implementation details diff --git a/fs/cifs/smb2transport.c b/fs/cifs/smb2transport.c index 349d5ccf854c..51b9437c3c7b 100644 --- a/fs/cifs/smb2transport.c +++ b/fs/cifs/smb2transport.c @@ -171,9 +171,7 @@ smb2_calc_signature(struct smb_rqst *rqst, struct TCP_Server_Info *server) unsigned char smb2_signature[SMB2_HMACSHA256_SIZE]; unsigned char *sigptr = smb2_signature; struct kvec *iov = rqst->rq_iov; - int iov_hdr_index = rqst->rq_nvec > 1 ? 1 : 0; - struct smb2_sync_hdr *shdr = - (struct smb2_sync_hdr *)iov[iov_hdr_index].iov_base; + struct smb2_sync_hdr *shdr = (struct smb2_sync_hdr *)iov[0].iov_base; struct cifs_ses *ses; ses = smb2_find_smb_ses(server, shdr->SessionId); @@ -204,7 +202,7 @@ smb2_calc_signature(struct smb_rqst *rqst, struct TCP_Server_Info *server) return rc; } - rc = __cifs_calc_signature(rqst, iov_hdr_index, server, sigptr, + rc = __cifs_calc_signature(rqst, server, sigptr, &server->secmech.sdeschmacsha256->shash); if (!rc) @@ -414,9 +412,7 @@ smb3_calc_signature(struct smb_rqst *rqst, struct TCP_Server_Info *server) unsigned char smb3_signature[SMB2_CMACAES_SIZE]; unsigned char *sigptr = smb3_signature; struct kvec *iov = rqst->rq_iov; - int iov_hdr_index = rqst->rq_nvec > 1 ? 1 : 0; - struct smb2_sync_hdr *shdr = - (struct smb2_sync_hdr *)iov[iov_hdr_index].iov_base; + struct smb2_sync_hdr *shdr = (struct smb2_sync_hdr *)iov[0].iov_base; struct cifs_ses *ses; ses = smb2_find_smb_ses(server, shdr->SessionId); @@ -447,7 +443,7 @@ smb3_calc_signature(struct smb_rqst *rqst, struct TCP_Server_Info *server) return rc; } - rc = __cifs_calc_signature(rqst, iov_hdr_index, server, sigptr, + rc = __cifs_calc_signature(rqst, server, sigptr, &server->secmech.sdesccmacaes->shash); if (!rc) @@ -462,7 +458,7 @@ smb2_sign_rqst(struct smb_rqst *rqst, struct TCP_Server_Info *server) { int rc = 0; struct smb2_sync_hdr *shdr = - (struct smb2_sync_hdr *)rqst->rq_iov[1].iov_base; + (struct smb2_sync_hdr *)rqst->rq_iov[0].iov_base; if (!(shdr->Flags & SMB2_FLAGS_SIGNED) || server->tcpStatus == CifsNeedNegotiate) @@ -635,7 +631,7 @@ smb2_setup_request(struct cifs_ses *ses, struct smb_rqst *rqst) { int rc; struct smb2_sync_hdr *shdr = - (struct smb2_sync_hdr *)rqst->rq_iov[1].iov_base; + (struct smb2_sync_hdr *)rqst->rq_iov[0].iov_base; struct mid_q_entry *mid; smb2_seq_num_into_buf(ses->server, shdr); @@ -656,7 +652,7 @@ smb2_setup_async_request(struct TCP_Server_Info *server, struct smb_rqst *rqst) { int rc; struct smb2_sync_hdr *shdr = - (struct smb2_sync_hdr *)rqst->rq_iov[1].iov_base; + (struct smb2_sync_hdr *)rqst->rq_iov[0].iov_base; struct mid_q_entry *mid; smb2_seq_num_into_buf(server, shdr); diff --git a/fs/cifs/smbdirect.c b/fs/cifs/smbdirect.c index e459c97151b3..6fd94d9ffac2 100644 --- a/fs/cifs/smbdirect.c +++ b/fs/cifs/smbdirect.c @@ -18,6 +18,7 @@ #include "smbdirect.h" #include "cifs_debug.h" #include "cifsproto.h" +#include "smb2proto.h" static struct smbd_response *get_empty_queue_buffer( struct smbd_connection *info); @@ -2087,7 +2088,7 @@ int smbd_send(struct smbd_connection *info, struct smb_rqst *rqst) struct kvec vec; int nvecs; int size; - unsigned int buflen = 0, remaining_data_length; + unsigned int buflen, remaining_data_length; int start, i, j; int max_iov_size = info->max_send_size - sizeof(struct smbd_data_transfer); @@ -2111,25 +2112,13 @@ int smbd_send(struct smbd_connection *info, struct smb_rqst *rqst) log_write(ERR, "expected the pdu length in 1st iov, but got %zu\n", rqst->rq_iov[0].iov_len); return -EINVAL; } - iov = &rqst->rq_iov[1]; - - /* total up iov array first */ - for (i = 0; i < rqst->rq_nvec-1; i++) { - buflen += iov[i].iov_len; - } /* * Add in the page array if there is one. The caller needs to set * rq_tailsz to PAGE_SIZE when the buffer has multiple pages and * ends at page boundary */ - if (rqst->rq_npages) { - if (rqst->rq_npages == 1) - buflen += rqst->rq_tailsz; - else - buflen += rqst->rq_pagesz * (rqst->rq_npages - 1) - - rqst->rq_offset + rqst->rq_tailsz; - } + buflen = smb2_rqst_len(rqst, true); if (buflen + sizeof(struct smbd_data_transfer) > info->max_fragmented_send_size) { @@ -2139,6 +2128,8 @@ int smbd_send(struct smbd_connection *info, struct smb_rqst *rqst) goto done; } + iov = &rqst->rq_iov[1]; + cifs_dbg(FYI, "Sending smb (RDMA): smb_len=%u\n", buflen); for (i = 0; i < rqst->rq_nvec-1; i++) dump_smb(iov[i].iov_base, iov[i].iov_len); diff --git a/fs/cifs/trace.h b/fs/cifs/trace.h index 61e74d455d90..67e413f6ee4d 100644 --- a/fs/cifs/trace.h +++ b/fs/cifs/trace.h @@ -378,7 +378,7 @@ DEFINE_EVENT(smb3_open_err_class, smb3_##name, \ TP_ARGS(xid, tid, sesid, create_options, desired_access, rc)) DEFINE_SMB3_OPEN_ERR_EVENT(open_err); - +DEFINE_SMB3_OPEN_ERR_EVENT(posix_mkdir_err); DECLARE_EVENT_CLASS(smb3_open_done_class, TP_PROTO(unsigned int xid, @@ -420,6 +420,7 @@ DEFINE_EVENT(smb3_open_done_class, smb3_##name, \ TP_ARGS(xid, fid, tid, sesid, create_options, desired_access)) DEFINE_SMB3_OPEN_DONE_EVENT(open_done); +DEFINE_SMB3_OPEN_DONE_EVENT(posix_mkdir_done); #endif /* _CIFS_TRACE_H */ diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index 1f1a68f89110..fb57dfbfb749 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -201,15 +201,24 @@ smb_send_kvec(struct TCP_Server_Info *server, struct msghdr *smb_msg, return 0; } -static unsigned long -rqst_len(struct smb_rqst *rqst) +unsigned long +smb2_rqst_len(struct smb_rqst *rqst, bool skip_rfc1002_marker) { unsigned int i; - struct kvec *iov = rqst->rq_iov; + struct kvec *iov; + int nvec; unsigned long buflen = 0; + if (skip_rfc1002_marker && rqst->rq_iov[0].iov_len == 4) { + iov = &rqst->rq_iov[1]; + nvec = rqst->rq_nvec - 1; + } else { + iov = rqst->rq_iov; + nvec = rqst->rq_nvec; + } + /* total up iov array first */ - for (i = 0; i < rqst->rq_nvec; i++) + for (i = 0; i < nvec; i++) buflen += iov[i].iov_len; /* @@ -236,18 +245,20 @@ rqst_len(struct smb_rqst *rqst) } static int -__smb_send_rqst(struct TCP_Server_Info *server, struct smb_rqst *rqst) +__smb_send_rqst(struct TCP_Server_Info *server, int num_rqst, + struct smb_rqst *rqst) { - int rc; - struct kvec *iov = rqst->rq_iov; - int n_vec = rqst->rq_nvec; - unsigned int smb_buf_length = get_rfc1002_length(iov[0].iov_base); - unsigned long send_length; - unsigned int i; + int rc = 0; + struct kvec *iov; + int n_vec; + unsigned int send_length = 0; + unsigned int i, j; size_t total_len = 0, sent, size; struct socket *ssocket = server->ssocket; struct msghdr smb_msg; int val = 1; + __be32 rfc1002_marker; + if (cifs_rdma_enabled(server) && server->smbd_conn) { rc = smbd_send(server->smbd_conn, rqst); goto smbd_done; @@ -255,51 +266,67 @@ __smb_send_rqst(struct TCP_Server_Info *server, struct smb_rqst *rqst) if (ssocket == NULL) return -ENOTSOCK; - /* sanity check send length */ - send_length = rqst_len(rqst); - if (send_length != smb_buf_length + 4) { - WARN(1, "Send length mismatch(send_length=%lu smb_buf_length=%u)\n", - send_length, smb_buf_length); - return -EIO; - } - - if (n_vec < 2) - return -EIO; - - cifs_dbg(FYI, "Sending smb: smb_len=%u\n", smb_buf_length); - dump_smb(iov[0].iov_base, iov[0].iov_len); - dump_smb(iov[1].iov_base, iov[1].iov_len); - /* cork the socket */ kernel_setsockopt(ssocket, SOL_TCP, TCP_CORK, (char *)&val, sizeof(val)); - size = 0; - for (i = 0; i < n_vec; i++) - size += iov[i].iov_len; + for (j = 0; j < num_rqst; j++) + send_length += smb2_rqst_len(&rqst[j], true); + rfc1002_marker = cpu_to_be32(send_length); - iov_iter_kvec(&smb_msg.msg_iter, WRITE | ITER_KVEC, iov, n_vec, size); + /* Generate a rfc1002 marker for SMB2+ */ + if (server->vals->header_preamble_size == 0) { + struct kvec hiov = { + .iov_base = &rfc1002_marker, + .iov_len = 4 + }; + iov_iter_kvec(&smb_msg.msg_iter, WRITE | ITER_KVEC, &hiov, + 1, 4); + rc = smb_send_kvec(server, &smb_msg, &sent); + if (rc < 0) + goto uncork; - rc = smb_send_kvec(server, &smb_msg, &sent); - if (rc < 0) - goto uncork; + total_len += sent; + send_length += 4; + } - total_len += sent; + cifs_dbg(FYI, "Sending smb: smb_len=%u\n", send_length); - /* now walk the page array and send each page in it */ - for (i = 0; i < rqst->rq_npages; i++) { - struct bio_vec bvec; + for (j = 0; j < num_rqst; j++) { + iov = rqst[j].rq_iov; + n_vec = rqst[j].rq_nvec; - bvec.bv_page = rqst->rq_pages[i]; - rqst_page_get_length(rqst, i, &bvec.bv_len, &bvec.bv_offset); + size = 0; + for (i = 0; i < n_vec; i++) { + dump_smb(iov[i].iov_base, iov[i].iov_len); + size += iov[i].iov_len; + } + + iov_iter_kvec(&smb_msg.msg_iter, WRITE | ITER_KVEC, + iov, n_vec, size); - iov_iter_bvec(&smb_msg.msg_iter, WRITE | ITER_BVEC, - &bvec, 1, bvec.bv_len); rc = smb_send_kvec(server, &smb_msg, &sent); if (rc < 0) - break; + goto uncork; total_len += sent; + + /* now walk the page array and send each page in it */ + for (i = 0; i < rqst[j].rq_npages; i++) { + struct bio_vec bvec; + + bvec.bv_page = rqst[j].rq_pages[i]; + rqst_page_get_length(&rqst[j], i, &bvec.bv_len, + &bvec.bv_offset); + + iov_iter_bvec(&smb_msg.msg_iter, WRITE | ITER_BVEC, + &bvec, 1, bvec.bv_len); + rc = smb_send_kvec(server, &smb_msg, &sent); + if (rc < 0) + break; + + total_len += sent; + } } uncork: @@ -308,9 +335,9 @@ uncork: kernel_setsockopt(ssocket, SOL_TCP, TCP_CORK, (char *)&val, sizeof(val)); - if ((total_len > 0) && (total_len != smb_buf_length + 4)) { + if ((total_len > 0) && (total_len != send_length)) { cifs_dbg(FYI, "partial send (wanted=%u sent=%zu): terminating session\n", - smb_buf_length + 4, total_len); + send_length, total_len); /* * If we have only sent part of an SMB then the next SMB could * be taken as the remainder of this one. We need to kill the @@ -335,7 +362,7 @@ smb_send_rqst(struct TCP_Server_Info *server, struct smb_rqst *rqst, int flags) int rc; if (!(flags & CIFS_TRANSFORM_REQ)) - return __smb_send_rqst(server, rqst); + return __smb_send_rqst(server, 1, rqst); if (!server->ops->init_transform_rq || !server->ops->free_transform_rq) { @@ -347,7 +374,7 @@ smb_send_rqst(struct TCP_Server_Info *server, struct smb_rqst *rqst, int flags) if (rc) return rc; - rc = __smb_send_rqst(server, &cur_rqst); + rc = __smb_send_rqst(server, 1, &cur_rqst); server->ops->free_transform_rq(&cur_rqst); return rc; } @@ -365,7 +392,7 @@ smb_send(struct TCP_Server_Info *server, struct smb_hdr *smb_buffer, iov[1].iov_base = (char *)smb_buffer + 4; iov[1].iov_len = smb_buf_length; - return __smb_send_rqst(server, &rqst); + return __smb_send_rqst(server, 1, &rqst); } static int @@ -730,7 +757,6 @@ cifs_send_recv(const unsigned int xid, struct cifs_ses *ses, * to the same server. We may make this configurable later or * use ses->maxReq. */ - rc = wait_for_free_request(ses->server, timeout, optype); if (rc) return rc; @@ -766,8 +792,8 @@ cifs_send_recv(const unsigned int xid, struct cifs_ses *ses, #ifdef CONFIG_CIFS_SMB311 if ((ses->status == CifsNew) || (optype & CIFS_NEG_OP)) - smb311_update_preauth_hash(ses, rqst->rq_iov+1, - rqst->rq_nvec-1); + smb311_update_preauth_hash(ses, rqst->rq_iov, + rqst->rq_nvec); #endif if (timeout == CIFS_ASYNC_OP) @@ -812,8 +838,8 @@ cifs_send_recv(const unsigned int xid, struct cifs_ses *ses, #ifdef CONFIG_CIFS_SMB311 if ((ses->status == CifsNew) || (optype & CIFS_NEG_OP)) { struct kvec iov = { - .iov_base = buf, - .iov_len = midQ->resp_buf_size + .iov_base = resp_iov->iov_base, + .iov_len = resp_iov->iov_len }; smb311_update_preauth_hash(ses, &iov, 1); } @@ -872,49 +898,6 @@ SendReceive2(const unsigned int xid, struct cifs_ses *ses, return rc; } -/* Like SendReceive2 but iov[0] does not contain an rfc1002 header */ -int -smb2_send_recv(const unsigned int xid, struct cifs_ses *ses, - struct kvec *iov, int n_vec, int *resp_buf_type /* ret */, - const int flags, struct kvec *resp_iov) -{ - struct smb_rqst rqst; - struct kvec s_iov[CIFS_MAX_IOV_SIZE], *new_iov; - int rc; - int i; - __u32 count; - __be32 rfc1002_marker; - - if (n_vec + 1 > CIFS_MAX_IOV_SIZE) { - new_iov = kmalloc_array(n_vec + 1, sizeof(struct kvec), - GFP_KERNEL); - if (!new_iov) - return -ENOMEM; - } else - new_iov = s_iov; - - /* 1st iov is an RFC1002 Session Message length */ - memcpy(new_iov + 1, iov, (sizeof(struct kvec) * n_vec)); - - count = 0; - for (i = 1; i < n_vec + 1; i++) - count += new_iov[i].iov_len; - - rfc1002_marker = cpu_to_be32(count); - - new_iov[0].iov_base = &rfc1002_marker; - new_iov[0].iov_len = 4; - - memset(&rqst, 0, sizeof(struct smb_rqst)); - rqst.rq_iov = new_iov; - rqst.rq_nvec = n_vec + 1; - - rc = cifs_send_recv(xid, ses, &rqst, resp_buf_type, flags, resp_iov); - if (n_vec + 1 > CIFS_MAX_IOV_SIZE) - kfree(new_iov); - return rc; -} - int SendReceive(const unsigned int xid, struct cifs_ses *ses, struct smb_hdr *in_buf, struct smb_hdr *out_buf, diff --git a/fs/jfs/xattr.c b/fs/jfs/xattr.c index c60f3d32ee91..a6797986b625 100644 --- a/fs/jfs/xattr.c +++ b/fs/jfs/xattr.c @@ -491,15 +491,17 @@ static int ea_get(struct inode *inode, struct ea_buffer *ea_buf, int min_size) if (size > PSIZE) { /* * To keep the rest of the code simple. Allocate a - * contiguous buffer to work with + * contiguous buffer to work with. Make the buffer large + * enough to make use of the whole extent. */ - ea_buf->xattr = kmalloc(size, GFP_KERNEL); + ea_buf->max_size = (size + sb->s_blocksize - 1) & + ~(sb->s_blocksize - 1); + + ea_buf->xattr = kmalloc(ea_buf->max_size, GFP_KERNEL); if (ea_buf->xattr == NULL) return -ENOMEM; ea_buf->flag = EA_MALLOC; - ea_buf->max_size = (size + sb->s_blocksize - 1) & - ~(sb->s_blocksize - 1); if (ea_size == 0) return 0; diff --git a/fs/notify/dnotify/dnotify.c b/fs/notify/dnotify/dnotify.c index 63a1ca4b9dee..e2bea2ac5dfb 100644 --- a/fs/notify/dnotify/dnotify.c +++ b/fs/notify/dnotify/dnotify.c @@ -79,12 +79,11 @@ static void dnotify_recalc_inode_mask(struct fsnotify_mark *fsn_mark) */ static int dnotify_handle_event(struct fsnotify_group *group, struct inode *inode, - struct fsnotify_mark *inode_mark, - struct fsnotify_mark *vfsmount_mark, u32 mask, const void *data, int data_type, const unsigned char *file_name, u32 cookie, struct fsnotify_iter_info *iter_info) { + struct fsnotify_mark *inode_mark = fsnotify_iter_inode_mark(iter_info); struct dnotify_mark *dn_mark; struct dnotify_struct *dn; struct dnotify_struct **prev; @@ -95,7 +94,8 @@ static int dnotify_handle_event(struct fsnotify_group *group, if (!S_ISDIR(inode->i_mode)) return 0; - BUG_ON(vfsmount_mark); + if (WARN_ON(fsnotify_iter_vfsmount_mark(iter_info))) + return 0; dn_mark = container_of(inode_mark, struct dnotify_mark, fsn_mark); @@ -319,7 +319,7 @@ int fcntl_dirnotify(int fd, struct file *filp, unsigned long arg) dn_mark = container_of(fsn_mark, struct dnotify_mark, fsn_mark); spin_lock(&fsn_mark->lock); } else { - error = fsnotify_add_mark_locked(new_fsn_mark, inode, NULL, 0); + error = fsnotify_add_inode_mark_locked(new_fsn_mark, inode, 0); if (error) { mutex_unlock(&dnotify_group->mark_mutex); goto out_err; diff --git a/fs/notify/fanotify/fanotify.c b/fs/notify/fanotify/fanotify.c index d94e8031fe5f..f90842efea13 100644 --- a/fs/notify/fanotify/fanotify.c +++ b/fs/notify/fanotify/fanotify.c @@ -87,17 +87,17 @@ static int fanotify_get_response(struct fsnotify_group *group, return ret; } -static bool fanotify_should_send_event(struct fsnotify_mark *inode_mark, - struct fsnotify_mark *vfsmnt_mark, - u32 event_mask, - const void *data, int data_type) +static bool fanotify_should_send_event(struct fsnotify_iter_info *iter_info, + u32 event_mask, const void *data, + int data_type) { __u32 marks_mask = 0, marks_ignored_mask = 0; const struct path *path = data; + struct fsnotify_mark *mark; + int type; - pr_debug("%s: inode_mark=%p vfsmnt_mark=%p mask=%x data=%p" - " data_type=%d\n", __func__, inode_mark, vfsmnt_mark, - event_mask, data, data_type); + pr_debug("%s: report_mask=%x mask=%x data=%p data_type=%d\n", + __func__, iter_info->report_mask, event_mask, data, data_type); /* if we don't have enough info to send an event to userspace say no */ if (data_type != FSNOTIFY_EVENT_PATH) @@ -108,20 +108,21 @@ static bool fanotify_should_send_event(struct fsnotify_mark *inode_mark, !d_can_lookup(path->dentry)) return false; - /* - * if the event is for a child and this inode doesn't care about - * events on the child, don't send it! - */ - if (inode_mark && - (!(event_mask & FS_EVENT_ON_CHILD) || - (inode_mark->mask & FS_EVENT_ON_CHILD))) { - marks_mask |= inode_mark->mask; - marks_ignored_mask |= inode_mark->ignored_mask; - } + fsnotify_foreach_obj_type(type) { + if (!fsnotify_iter_should_report_type(iter_info, type)) + continue; + mark = iter_info->marks[type]; + /* + * if the event is for a child and this inode doesn't care about + * events on the child, don't send it! + */ + if (type == FSNOTIFY_OBJ_TYPE_INODE && + (event_mask & FS_EVENT_ON_CHILD) && + !(mark->mask & FS_EVENT_ON_CHILD)) + continue; - if (vfsmnt_mark) { - marks_mask |= vfsmnt_mark->mask; - marks_ignored_mask |= vfsmnt_mark->ignored_mask; + marks_mask |= mark->mask; + marks_ignored_mask |= mark->ignored_mask; } if (d_is_dir(path->dentry) && @@ -178,8 +179,6 @@ init: __maybe_unused static int fanotify_handle_event(struct fsnotify_group *group, struct inode *inode, - struct fsnotify_mark *inode_mark, - struct fsnotify_mark *fanotify_mark, u32 mask, const void *data, int data_type, const unsigned char *file_name, u32 cookie, struct fsnotify_iter_info *iter_info) @@ -199,8 +198,7 @@ static int fanotify_handle_event(struct fsnotify_group *group, BUILD_BUG_ON(FAN_ACCESS_PERM != FS_ACCESS_PERM); BUILD_BUG_ON(FAN_ONDIR != FS_ISDIR); - if (!fanotify_should_send_event(inode_mark, fanotify_mark, mask, data, - data_type)) + if (!fanotify_should_send_event(iter_info, mask, data, data_type)) return 0; pr_debug("%s: group=%p inode=%p mask=%x\n", __func__, group, inode, diff --git a/fs/notify/fdinfo.c b/fs/notify/fdinfo.c index d478629c728b..10aac1942c9f 100644 --- a/fs/notify/fdinfo.c +++ b/fs/notify/fdinfo.c @@ -77,7 +77,7 @@ static void inotify_fdinfo(struct seq_file *m, struct fsnotify_mark *mark) struct inotify_inode_mark *inode_mark; struct inode *inode; - if (!(mark->connector->flags & FSNOTIFY_OBJ_TYPE_INODE)) + if (mark->connector->type != FSNOTIFY_OBJ_TYPE_INODE) return; inode_mark = container_of(mark, struct inotify_inode_mark, fsn_mark); @@ -116,7 +116,7 @@ static void fanotify_fdinfo(struct seq_file *m, struct fsnotify_mark *mark) if (mark->flags & FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY) mflags |= FAN_MARK_IGNORED_SURV_MODIFY; - if (mark->connector->flags & FSNOTIFY_OBJ_TYPE_INODE) { + if (mark->connector->type == FSNOTIFY_OBJ_TYPE_INODE) { inode = igrab(mark->connector->inode); if (!inode) return; @@ -126,7 +126,7 @@ static void fanotify_fdinfo(struct seq_file *m, struct fsnotify_mark *mark) show_mark_fhandle(m, inode); seq_putc(m, '\n'); iput(inode); - } else if (mark->connector->flags & FSNOTIFY_OBJ_TYPE_VFSMOUNT) { + } else if (mark->connector->type == FSNOTIFY_OBJ_TYPE_VFSMOUNT) { struct mount *mnt = real_mount(mark->connector->mnt); seq_printf(m, "fanotify mnt_id:%x mflags:%x mask:%x ignored_mask:%x\n", diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c index 613ec7e5a465..f174397b63a0 100644 --- a/fs/notify/fsnotify.c +++ b/fs/notify/fsnotify.c @@ -184,8 +184,6 @@ int __fsnotify_parent(const struct path *path, struct dentry *dentry, __u32 mask EXPORT_SYMBOL_GPL(__fsnotify_parent); static int send_to_group(struct inode *to_tell, - struct fsnotify_mark *inode_mark, - struct fsnotify_mark *vfsmount_mark, __u32 mask, const void *data, int data_is, u32 cookie, const unsigned char *file_name, @@ -195,48 +193,45 @@ static int send_to_group(struct inode *to_tell, __u32 test_mask = (mask & ~FS_EVENT_ON_CHILD); __u32 marks_mask = 0; __u32 marks_ignored_mask = 0; + struct fsnotify_mark *mark; + int type; - if (unlikely(!inode_mark && !vfsmount_mark)) { - BUG(); + if (WARN_ON(!iter_info->report_mask)) return 0; - } /* clear ignored on inode modification */ if (mask & FS_MODIFY) { - if (inode_mark && - !(inode_mark->flags & FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY)) - inode_mark->ignored_mask = 0; - if (vfsmount_mark && - !(vfsmount_mark->flags & FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY)) - vfsmount_mark->ignored_mask = 0; - } - - /* does the inode mark tell us to do something? */ - if (inode_mark) { - group = inode_mark->group; - marks_mask |= inode_mark->mask; - marks_ignored_mask |= inode_mark->ignored_mask; + fsnotify_foreach_obj_type(type) { + if (!fsnotify_iter_should_report_type(iter_info, type)) + continue; + mark = iter_info->marks[type]; + if (mark && + !(mark->flags & FSNOTIFY_MARK_FLAG_IGNORED_SURV_MODIFY)) + mark->ignored_mask = 0; + } } - /* does the vfsmount_mark tell us to do something? */ - if (vfsmount_mark) { - group = vfsmount_mark->group; - marks_mask |= vfsmount_mark->mask; - marks_ignored_mask |= vfsmount_mark->ignored_mask; + fsnotify_foreach_obj_type(type) { + if (!fsnotify_iter_should_report_type(iter_info, type)) + continue; + mark = iter_info->marks[type]; + /* does the object mark tell us to do something? */ + if (mark) { + group = mark->group; + marks_mask |= mark->mask; + marks_ignored_mask |= mark->ignored_mask; + } } - pr_debug("%s: group=%p to_tell=%p mask=%x inode_mark=%p" - " vfsmount_mark=%p marks_mask=%x marks_ignored_mask=%x" + pr_debug("%s: group=%p to_tell=%p mask=%x marks_mask=%x marks_ignored_mask=%x" " data=%p data_is=%d cookie=%d\n", - __func__, group, to_tell, mask, inode_mark, vfsmount_mark, - marks_mask, marks_ignored_mask, data, - data_is, cookie); + __func__, group, to_tell, mask, marks_mask, marks_ignored_mask, + data, data_is, cookie); if (!(test_mask & marks_mask & ~marks_ignored_mask)) return 0; - return group->ops->handle_event(group, to_tell, inode_mark, - vfsmount_mark, mask, data, data_is, + return group->ops->handle_event(group, to_tell, mask, data, data_is, file_name, cookie, iter_info); } @@ -264,6 +259,57 @@ static struct fsnotify_mark *fsnotify_next_mark(struct fsnotify_mark *mark) } /* + * iter_info is a multi head priority queue of marks. + * Pick a subset of marks from queue heads, all with the + * same group and set the report_mask for selected subset. + * Returns the report_mask of the selected subset. + */ +static unsigned int fsnotify_iter_select_report_types( + struct fsnotify_iter_info *iter_info) +{ + struct fsnotify_group *max_prio_group = NULL; + struct fsnotify_mark *mark; + int type; + + /* Choose max prio group among groups of all queue heads */ + fsnotify_foreach_obj_type(type) { + mark = iter_info->marks[type]; + if (mark && + fsnotify_compare_groups(max_prio_group, mark->group) > 0) + max_prio_group = mark->group; + } + + if (!max_prio_group) + return 0; + + /* Set the report mask for marks from same group as max prio group */ + iter_info->report_mask = 0; + fsnotify_foreach_obj_type(type) { + mark = iter_info->marks[type]; + if (mark && + fsnotify_compare_groups(max_prio_group, mark->group) == 0) + fsnotify_iter_set_report_type(iter_info, type); + } + + return iter_info->report_mask; +} + +/* + * Pop from iter_info multi head queue, the marks that were iterated in the + * current iteration step. + */ +static void fsnotify_iter_next(struct fsnotify_iter_info *iter_info) +{ + int type; + + fsnotify_foreach_obj_type(type) { + if (fsnotify_iter_should_report_type(iter_info, type)) + iter_info->marks[type] = + fsnotify_next_mark(iter_info->marks[type]); + } +} + +/* * This is the main call to fsnotify. The VFS calls into hook specific functions * in linux/fsnotify.h. Those functions then in turn call here. Here will call * out to all of the registered fsnotify_group. Those groups can then use the @@ -307,15 +353,15 @@ int fsnotify(struct inode *to_tell, __u32 mask, const void *data, int data_is, if ((mask & FS_MODIFY) || (test_mask & to_tell->i_fsnotify_mask)) { - iter_info.inode_mark = + iter_info.marks[FSNOTIFY_OBJ_TYPE_INODE] = fsnotify_first_mark(&to_tell->i_fsnotify_marks); } if (mnt && ((mask & FS_MODIFY) || (test_mask & mnt->mnt_fsnotify_mask))) { - iter_info.inode_mark = + iter_info.marks[FSNOTIFY_OBJ_TYPE_INODE] = fsnotify_first_mark(&to_tell->i_fsnotify_marks); - iter_info.vfsmount_mark = + iter_info.marks[FSNOTIFY_OBJ_TYPE_VFSMOUNT] = fsnotify_first_mark(&mnt->mnt_fsnotify_marks); } @@ -324,32 +370,14 @@ int fsnotify(struct inode *to_tell, __u32 mask, const void *data, int data_is, * ignore masks are properly reflected for mount mark notifications. * That's why this traversal is so complicated... */ - while (iter_info.inode_mark || iter_info.vfsmount_mark) { - struct fsnotify_mark *inode_mark = iter_info.inode_mark; - struct fsnotify_mark *vfsmount_mark = iter_info.vfsmount_mark; - - if (inode_mark && vfsmount_mark) { - int cmp = fsnotify_compare_groups(inode_mark->group, - vfsmount_mark->group); - if (cmp > 0) - inode_mark = NULL; - else if (cmp < 0) - vfsmount_mark = NULL; - } - - ret = send_to_group(to_tell, inode_mark, vfsmount_mark, mask, - data, data_is, cookie, file_name, - &iter_info); + while (fsnotify_iter_select_report_types(&iter_info)) { + ret = send_to_group(to_tell, mask, data, data_is, cookie, + file_name, &iter_info); if (ret && (mask & ALL_FSNOTIFY_PERM_EVENTS)) goto out; - if (inode_mark) - iter_info.inode_mark = - fsnotify_next_mark(iter_info.inode_mark); - if (vfsmount_mark) - iter_info.vfsmount_mark = - fsnotify_next_mark(iter_info.vfsmount_mark); + fsnotify_iter_next(&iter_info); } ret = 0; out: diff --git a/fs/notify/fsnotify.h b/fs/notify/fsnotify.h index 60f365dc1408..34515d2c4ba3 100644 --- a/fs/notify/fsnotify.h +++ b/fs/notify/fsnotify.h @@ -9,12 +9,6 @@ #include "../mount.h" -struct fsnotify_iter_info { - struct fsnotify_mark *inode_mark; - struct fsnotify_mark *vfsmount_mark; - int srcu_idx; -}; - /* destroy all events sitting in this groups notification queue */ extern void fsnotify_flush_notify(struct fsnotify_group *group); diff --git a/fs/notify/group.c b/fs/notify/group.c index b7a4b6a69efa..aa5468f23e45 100644 --- a/fs/notify/group.c +++ b/fs/notify/group.c @@ -67,7 +67,7 @@ void fsnotify_destroy_group(struct fsnotify_group *group) fsnotify_group_stop_queueing(group); /* Clear all marks for this group and queue them for destruction */ - fsnotify_clear_marks_by_group(group, FSNOTIFY_OBJ_ALL_TYPES); + fsnotify_clear_marks_by_group(group, FSNOTIFY_OBJ_ALL_TYPES_MASK); /* * Some marks can still be pinned when waiting for response from diff --git a/fs/notify/inotify/inotify.h b/fs/notify/inotify/inotify.h index c00d2caca894..7e4578d35b61 100644 --- a/fs/notify/inotify/inotify.h +++ b/fs/notify/inotify/inotify.h @@ -25,8 +25,6 @@ extern void inotify_ignored_and_remove_idr(struct fsnotify_mark *fsn_mark, struct fsnotify_group *group); extern int inotify_handle_event(struct fsnotify_group *group, struct inode *inode, - struct fsnotify_mark *inode_mark, - struct fsnotify_mark *vfsmount_mark, u32 mask, const void *data, int data_type, const unsigned char *file_name, u32 cookie, struct fsnotify_iter_info *iter_info); diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c index 40dedb37a1f3..9ab6dde38a14 100644 --- a/fs/notify/inotify/inotify_fsnotify.c +++ b/fs/notify/inotify/inotify_fsnotify.c @@ -65,12 +65,11 @@ static int inotify_merge(struct list_head *list, int inotify_handle_event(struct fsnotify_group *group, struct inode *inode, - struct fsnotify_mark *inode_mark, - struct fsnotify_mark *vfsmount_mark, u32 mask, const void *data, int data_type, const unsigned char *file_name, u32 cookie, struct fsnotify_iter_info *iter_info) { + struct fsnotify_mark *inode_mark = fsnotify_iter_inode_mark(iter_info); struct inotify_inode_mark *i_mark; struct inotify_event_info *event; struct fsnotify_event *fsn_event; @@ -78,7 +77,8 @@ int inotify_handle_event(struct fsnotify_group *group, int len = 0; int alloc_len = sizeof(struct inotify_event_info); - BUG_ON(vfsmount_mark); + if (WARN_ON(fsnotify_iter_vfsmount_mark(iter_info))) + return 0; if ((inode_mark->mask & FS_EXCL_UNLINK) && (data_type == FSNOTIFY_EVENT_PATH)) { diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c index ef32f3657958..1cf5b779d862 100644 --- a/fs/notify/inotify/inotify_user.c +++ b/fs/notify/inotify/inotify_user.c @@ -485,10 +485,14 @@ void inotify_ignored_and_remove_idr(struct fsnotify_mark *fsn_mark, struct fsnotify_group *group) { struct inotify_inode_mark *i_mark; + struct fsnotify_iter_info iter_info = { }; + + fsnotify_iter_set_report_type_mark(&iter_info, FSNOTIFY_OBJ_TYPE_INODE, + fsn_mark); /* Queue ignore event for the watch */ - inotify_handle_event(group, NULL, fsn_mark, NULL, FS_IN_IGNORED, - NULL, FSNOTIFY_EVENT_NONE, NULL, 0, NULL); + inotify_handle_event(group, NULL, FS_IN_IGNORED, NULL, + FSNOTIFY_EVENT_NONE, NULL, 0, &iter_info); i_mark = container_of(fsn_mark, struct inotify_inode_mark, fsn_mark); /* remove this mark from the idr */ @@ -578,7 +582,7 @@ static int inotify_new_watch(struct fsnotify_group *group, } /* we are on the idr, now get on the inode */ - ret = fsnotify_add_mark_locked(&tmp_i_mark->fsn_mark, inode, NULL, 0); + ret = fsnotify_add_inode_mark_locked(&tmp_i_mark->fsn_mark, inode, 0); if (ret) { /* we failed to get on the inode, get off the idr */ inotify_remove_from_idr(group, tmp_i_mark); diff --git a/fs/notify/mark.c b/fs/notify/mark.c index e9191b416434..61f4c5fa34c7 100644 --- a/fs/notify/mark.c +++ b/fs/notify/mark.c @@ -119,9 +119,9 @@ static void __fsnotify_recalc_mask(struct fsnotify_mark_connector *conn) if (mark->flags & FSNOTIFY_MARK_FLAG_ATTACHED) new_mask |= mark->mask; } - if (conn->flags & FSNOTIFY_OBJ_TYPE_INODE) + if (conn->type == FSNOTIFY_OBJ_TYPE_INODE) conn->inode->i_fsnotify_mask = new_mask; - else if (conn->flags & FSNOTIFY_OBJ_TYPE_VFSMOUNT) + else if (conn->type == FSNOTIFY_OBJ_TYPE_VFSMOUNT) real_mount(conn->mnt)->mnt_fsnotify_mask = new_mask; } @@ -139,7 +139,7 @@ void fsnotify_recalc_mask(struct fsnotify_mark_connector *conn) spin_lock(&conn->lock); __fsnotify_recalc_mask(conn); spin_unlock(&conn->lock); - if (conn->flags & FSNOTIFY_OBJ_TYPE_INODE) + if (conn->type == FSNOTIFY_OBJ_TYPE_INODE) __fsnotify_update_child_dentry_flags(conn->inode); } @@ -166,18 +166,18 @@ static struct inode *fsnotify_detach_connector_from_object( { struct inode *inode = NULL; - if (conn->flags & FSNOTIFY_OBJ_TYPE_INODE) { + if (conn->type == FSNOTIFY_OBJ_TYPE_INODE) { inode = conn->inode; rcu_assign_pointer(inode->i_fsnotify_marks, NULL); inode->i_fsnotify_mask = 0; conn->inode = NULL; - conn->flags &= ~FSNOTIFY_OBJ_TYPE_INODE; - } else if (conn->flags & FSNOTIFY_OBJ_TYPE_VFSMOUNT) { + conn->type = FSNOTIFY_OBJ_TYPE_DETACHED; + } else if (conn->type == FSNOTIFY_OBJ_TYPE_VFSMOUNT) { rcu_assign_pointer(real_mount(conn->mnt)->mnt_fsnotify_marks, NULL); real_mount(conn->mnt)->mnt_fsnotify_mask = 0; conn->mnt = NULL; - conn->flags &= ~FSNOTIFY_OBJ_TYPE_VFSMOUNT; + conn->type = FSNOTIFY_OBJ_TYPE_DETACHED; } return inode; @@ -294,12 +294,12 @@ static void fsnotify_put_mark_wake(struct fsnotify_mark *mark) bool fsnotify_prepare_user_wait(struct fsnotify_iter_info *iter_info) { - /* This can fail if mark is being removed */ - if (!fsnotify_get_mark_safe(iter_info->inode_mark)) - return false; - if (!fsnotify_get_mark_safe(iter_info->vfsmount_mark)) { - fsnotify_put_mark_wake(iter_info->inode_mark); - return false; + int type; + + fsnotify_foreach_obj_type(type) { + /* This can fail if mark is being removed */ + if (!fsnotify_get_mark_safe(iter_info->marks[type])) + goto fail; } /* @@ -310,13 +310,20 @@ bool fsnotify_prepare_user_wait(struct fsnotify_iter_info *iter_info) srcu_read_unlock(&fsnotify_mark_srcu, iter_info->srcu_idx); return true; + +fail: + for (type--; type >= 0; type--) + fsnotify_put_mark_wake(iter_info->marks[type]); + return false; } void fsnotify_finish_user_wait(struct fsnotify_iter_info *iter_info) { + int type; + iter_info->srcu_idx = srcu_read_lock(&fsnotify_mark_srcu); - fsnotify_put_mark_wake(iter_info->inode_mark); - fsnotify_put_mark_wake(iter_info->vfsmount_mark); + fsnotify_foreach_obj_type(type) + fsnotify_put_mark_wake(iter_info->marks[type]); } /* @@ -442,10 +449,10 @@ static int fsnotify_attach_connector_to_object( spin_lock_init(&conn->lock); INIT_HLIST_HEAD(&conn->list); if (inode) { - conn->flags = FSNOTIFY_OBJ_TYPE_INODE; + conn->type = FSNOTIFY_OBJ_TYPE_INODE; conn->inode = igrab(inode); } else { - conn->flags = FSNOTIFY_OBJ_TYPE_VFSMOUNT; + conn->type = FSNOTIFY_OBJ_TYPE_VFSMOUNT; conn->mnt = mnt; } /* @@ -479,8 +486,7 @@ static struct fsnotify_mark_connector *fsnotify_grab_connector( if (!conn) goto out; spin_lock(&conn->lock); - if (!(conn->flags & (FSNOTIFY_OBJ_TYPE_INODE | - FSNOTIFY_OBJ_TYPE_VFSMOUNT))) { + if (conn->type == FSNOTIFY_OBJ_TYPE_DETACHED) { spin_unlock(&conn->lock); srcu_read_unlock(&fsnotify_mark_srcu, idx); return NULL; @@ -646,16 +652,16 @@ struct fsnotify_mark *fsnotify_find_mark( return NULL; } -/* Clear any marks in a group with given type */ +/* Clear any marks in a group with given type mask */ void fsnotify_clear_marks_by_group(struct fsnotify_group *group, - unsigned int type) + unsigned int type_mask) { struct fsnotify_mark *lmark, *mark; LIST_HEAD(to_free); struct list_head *head = &to_free; /* Skip selection step if we want to clear all marks. */ - if (type == FSNOTIFY_OBJ_ALL_TYPES) { + if (type_mask == FSNOTIFY_OBJ_ALL_TYPES_MASK) { head = &group->marks_list; goto clear; } @@ -670,7 +676,7 @@ void fsnotify_clear_marks_by_group(struct fsnotify_group *group, */ mutex_lock_nested(&group->mark_mutex, SINGLE_DEPTH_NESTING); list_for_each_entry_safe(mark, lmark, &group->marks_list, g_list) { - if (mark->connector->flags & type) + if ((1U << mark->connector->type) & type_mask) list_move(&mark->g_list, &to_free); } mutex_unlock(&group->mark_mutex); diff --git a/fs/orangefs/orangefs-sysfs.c b/fs/orangefs/orangefs-sysfs.c index 079a465796f3..dd28079f518c 100644 --- a/fs/orangefs/orangefs-sysfs.c +++ b/fs/orangefs/orangefs-sysfs.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Documentation/ABI/stable/orangefs-sysfs: + * Documentation/ABI/stable/sysfs-fs-orangefs: * * What: /sys/fs/orangefs/perf_counter_reset * Date: June 2015 diff --git a/fs/proc/base.c b/fs/proc/base.c index b6572944efc3..aaffc0c30216 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -235,6 +235,10 @@ static ssize_t get_mm_cmdline(struct mm_struct *mm, char __user *buf, if (env_start != arg_end || env_start >= env_end) env_start = env_end = arg_end; + /* .. and limit it to a maximum of one page of slop */ + if (env_end >= arg_end + PAGE_SIZE) + env_end = arg_end + PAGE_SIZE - 1; + /* We're not going to care if "*ppos" has high bits set */ pos = arg_start + *ppos; @@ -254,10 +258,19 @@ static ssize_t get_mm_cmdline(struct mm_struct *mm, char __user *buf, while (count) { int got; size_t size = min_t(size_t, PAGE_SIZE, count); + long offset; - got = access_remote_vm(mm, pos, page, size, FOLL_ANON); - if (got <= 0) + /* + * Are we already starting past the official end? + * We always include the last byte that is *supposed* + * to be NUL + */ + offset = (pos >= arg_end) ? pos - arg_end + 1 : 0; + + got = access_remote_vm(mm, pos - offset, page, size + offset, FOLL_ANON); + if (got <= offset) break; + got -= offset; /* Don't walk past a NUL character once you hit arg_end */ if (pos + got >= arg_end) { @@ -276,12 +289,17 @@ static ssize_t get_mm_cmdline(struct mm_struct *mm, char __user *buf, n = arg_end - pos - 1; /* Cut off at first NUL after 'n' */ - got = n + strnlen(page+n, got-n); - if (!got) + got = n + strnlen(page+n, offset+got-n); + if (got < offset) break; + got -= offset; + + /* Include the NUL if it existed */ + if (got < size) + got++; } - got -= copy_to_user(buf, page, got); + got -= copy_to_user(buf, page+offset, got); if (unlikely(!got)) { if (!len) len = -EFAULT; diff --git a/include/keys/asymmetric-subtype.h b/include/keys/asymmetric-subtype.h index 2480469ce8fb..e0a9c2368872 100644 --- a/include/keys/asymmetric-subtype.h +++ b/include/keys/asymmetric-subtype.h @@ -1,6 +1,6 @@ /* Asymmetric public-key cryptography key subtype * - * See Documentation/security/asymmetric-keys.txt + * See Documentation/crypto/asymmetric-keys.txt * * Copyright (C) 2012 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) diff --git a/include/keys/asymmetric-type.h b/include/keys/asymmetric-type.h index b38240716d41..1cb77cd5135e 100644 --- a/include/keys/asymmetric-type.h +++ b/include/keys/asymmetric-type.h @@ -1,6 +1,6 @@ /* Asymmetric Public-key cryptography key type interface * - * See Documentation/security/asymmetric-keys.txt + * See Documentation/crypto/asymmetric-keys.txt * * Copyright (C) 2012 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) diff --git a/include/linux/assoc_array.h b/include/linux/assoc_array.h index a89df3be1686..65e3832f96b2 100644 --- a/include/linux/assoc_array.h +++ b/include/linux/assoc_array.h @@ -1,6 +1,6 @@ /* Generic associative array implementation. * - * See Documentation/assoc_array.txt for information. + * See Documentation/core-api/assoc_array.rst for information. * * Copyright (C) 2013 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) diff --git a/include/linux/assoc_array_priv.h b/include/linux/assoc_array_priv.h index 711275e6681c..a00a06550c10 100644 --- a/include/linux/assoc_array_priv.h +++ b/include/linux/assoc_array_priv.h @@ -1,6 +1,6 @@ /* Private definitions for the generic associative array implementation. * - * See Documentation/assoc_array.txt for information. + * See Documentation/core-api/assoc_array.rst for information. * * Copyright (C) 2013 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) diff --git a/include/linux/blk-mq.h b/include/linux/blk-mq.h index fb355173f3c7..e3147eb74222 100644 --- a/include/linux/blk-mq.h +++ b/include/linux/blk-mq.h @@ -281,8 +281,6 @@ void blk_freeze_queue_start(struct request_queue *q); void blk_mq_freeze_queue_wait(struct request_queue *q); int blk_mq_freeze_queue_wait_timeout(struct request_queue *q, unsigned long timeout); -int blk_mq_tagset_iter(struct blk_mq_tag_set *set, void *data, - int (reinit_request)(void *, struct request *)); int blk_mq_map_queues(struct blk_mq_tag_set *set); void blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, int nr_hw_queues); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index bca3a92eb55f..9154570edf29 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -127,6 +127,8 @@ typedef __u32 __bitwise req_flags_t; #define RQF_ZONE_WRITE_LOCKED ((__force req_flags_t)(1 << 19)) /* already slept for hybrid poll */ #define RQF_MQ_POLL_SLEPT ((__force req_flags_t)(1 << 20)) +/* ->timeout has been called, don't expire again */ +#define RQF_TIMED_OUT ((__force req_flags_t)(1 << 21)) /* flags that prevent us from merging requests: */ #define RQF_NOMERGE_FLAGS \ @@ -560,7 +562,6 @@ struct request_queue { unsigned int dma_alignment; struct blk_queue_tag *queue_tags; - struct list_head tag_busy_list; unsigned int nr_sorted; unsigned int in_flight[2]; @@ -1373,7 +1374,6 @@ extern void blk_queue_end_tag(struct request_queue *, struct request *); extern int blk_queue_init_tags(struct request_queue *, int, struct blk_queue_tag *, int); extern void blk_queue_free_tags(struct request_queue *); extern int blk_queue_resize_tags(struct request_queue *, int); -extern void blk_queue_invalidate_tags(struct request_queue *); extern struct blk_queue_tag *blk_init_tags(int, int); extern void blk_free_tags(struct blk_queue_tag *); diff --git a/include/linux/circ_buf.h b/include/linux/circ_buf.h index 7cf262a421c3..b3233e8202f9 100644 --- a/include/linux/circ_buf.h +++ b/include/linux/circ_buf.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* - * See Documentation/circular-buffers.txt for more information. + * See Documentation/core-api/circular-buffers.rst for more information. */ #ifndef _LINUX_CIRC_BUF_H diff --git a/include/linux/dma-contiguous.h b/include/linux/dma-contiguous.h index b67bf6ac907d..3c5a4cb3eb95 100644 --- a/include/linux/dma-contiguous.h +++ b/include/linux/dma-contiguous.h @@ -48,7 +48,7 @@ * CMA should not be used by the device drivers directly. It is * only a helper framework for dma-mapping subsystem. * - * For more information, see kernel-docs in drivers/base/dma-contiguous.c + * For more information, see kernel-docs in kernel/dma/contiguous.c */ #ifdef __KERNEL__ diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h index e64c0294f50b..b38964a7a521 100644 --- a/include/linux/fsnotify_backend.h +++ b/include/linux/fsnotify_backend.h @@ -98,8 +98,6 @@ struct fsnotify_iter_info; struct fsnotify_ops { int (*handle_event)(struct fsnotify_group *group, struct inode *inode, - struct fsnotify_mark *inode_mark, - struct fsnotify_mark *vfsmount_mark, u32 mask, const void *data, int data_type, const unsigned char *file_name, u32 cookie, struct fsnotify_iter_info *iter_info); @@ -201,6 +199,57 @@ struct fsnotify_group { #define FSNOTIFY_EVENT_PATH 1 #define FSNOTIFY_EVENT_INODE 2 +enum fsnotify_obj_type { + FSNOTIFY_OBJ_TYPE_INODE, + FSNOTIFY_OBJ_TYPE_VFSMOUNT, + FSNOTIFY_OBJ_TYPE_COUNT, + FSNOTIFY_OBJ_TYPE_DETACHED = FSNOTIFY_OBJ_TYPE_COUNT +}; + +#define FSNOTIFY_OBJ_TYPE_INODE_FL (1U << FSNOTIFY_OBJ_TYPE_INODE) +#define FSNOTIFY_OBJ_TYPE_VFSMOUNT_FL (1U << FSNOTIFY_OBJ_TYPE_VFSMOUNT) +#define FSNOTIFY_OBJ_ALL_TYPES_MASK ((1U << FSNOTIFY_OBJ_TYPE_COUNT) - 1) + +struct fsnotify_iter_info { + struct fsnotify_mark *marks[FSNOTIFY_OBJ_TYPE_COUNT]; + unsigned int report_mask; + int srcu_idx; +}; + +static inline bool fsnotify_iter_should_report_type( + struct fsnotify_iter_info *iter_info, int type) +{ + return (iter_info->report_mask & (1U << type)); +} + +static inline void fsnotify_iter_set_report_type( + struct fsnotify_iter_info *iter_info, int type) +{ + iter_info->report_mask |= (1U << type); +} + +static inline void fsnotify_iter_set_report_type_mark( + struct fsnotify_iter_info *iter_info, int type, + struct fsnotify_mark *mark) +{ + iter_info->marks[type] = mark; + iter_info->report_mask |= (1U << type); +} + +#define FSNOTIFY_ITER_FUNCS(name, NAME) \ +static inline struct fsnotify_mark *fsnotify_iter_##name##_mark( \ + struct fsnotify_iter_info *iter_info) \ +{ \ + return (iter_info->report_mask & FSNOTIFY_OBJ_TYPE_##NAME##_FL) ? \ + iter_info->marks[FSNOTIFY_OBJ_TYPE_##NAME] : NULL; \ +} + +FSNOTIFY_ITER_FUNCS(inode, INODE) +FSNOTIFY_ITER_FUNCS(vfsmount, VFSMOUNT) + +#define fsnotify_foreach_obj_type(type) \ + for (type = 0; type < FSNOTIFY_OBJ_TYPE_COUNT; type++) + /* * Inode / vfsmount point to this structure which tracks all marks attached to * the inode / vfsmount. The reference to inode / vfsmount is held by this @@ -209,11 +258,7 @@ struct fsnotify_group { */ struct fsnotify_mark_connector { spinlock_t lock; -#define FSNOTIFY_OBJ_TYPE_INODE 0x01 -#define FSNOTIFY_OBJ_TYPE_VFSMOUNT 0x02 -#define FSNOTIFY_OBJ_ALL_TYPES (FSNOTIFY_OBJ_TYPE_INODE | \ - FSNOTIFY_OBJ_TYPE_VFSMOUNT) - unsigned int flags; /* Type of object [lock] */ + unsigned int type; /* Type of object [lock] */ union { /* Object pointer [lock] */ struct inode *inode; struct vfsmount *mnt; @@ -356,7 +401,21 @@ extern struct fsnotify_mark *fsnotify_find_mark( extern int fsnotify_add_mark(struct fsnotify_mark *mark, struct inode *inode, struct vfsmount *mnt, int allow_dups); extern int fsnotify_add_mark_locked(struct fsnotify_mark *mark, - struct inode *inode, struct vfsmount *mnt, int allow_dups); + struct inode *inode, struct vfsmount *mnt, + int allow_dups); +/* attach the mark to the inode */ +static inline int fsnotify_add_inode_mark(struct fsnotify_mark *mark, + struct inode *inode, + int allow_dups) +{ + return fsnotify_add_mark(mark, inode, NULL, allow_dups); +} +static inline int fsnotify_add_inode_mark_locked(struct fsnotify_mark *mark, + struct inode *inode, + int allow_dups) +{ + return fsnotify_add_mark_locked(mark, inode, NULL, allow_dups); +} /* given a group and a mark, flag mark to be freed when all references are dropped */ extern void fsnotify_destroy_mark(struct fsnotify_mark *mark, struct fsnotify_group *group); @@ -369,12 +428,12 @@ extern void fsnotify_clear_marks_by_group(struct fsnotify_group *group, unsigned /* run all the marks in a group, and clear all of the vfsmount marks */ static inline void fsnotify_clear_vfsmount_marks_by_group(struct fsnotify_group *group) { - fsnotify_clear_marks_by_group(group, FSNOTIFY_OBJ_TYPE_VFSMOUNT); + fsnotify_clear_marks_by_group(group, FSNOTIFY_OBJ_TYPE_VFSMOUNT_FL); } /* run all the marks in a group, and clear all of the inode marks */ static inline void fsnotify_clear_inode_marks_by_group(struct fsnotify_group *group) { - fsnotify_clear_marks_by_group(group, FSNOTIFY_OBJ_TYPE_INODE); + fsnotify_clear_marks_by_group(group, FSNOTIFY_OBJ_TYPE_INODE_FL); } extern void fsnotify_get_mark(struct fsnotify_mark *mark); extern void fsnotify_put_mark(struct fsnotify_mark *mark); diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 9c3c9a319e48..8154f4920fcb 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -1,7 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* * Ftrace header. For implementation details beyond the random comments - * scattered below, see: Documentation/trace/ftrace-design.txt + * scattered below, see: Documentation/trace/ftrace-design.rst */ #ifndef _LINUX_FTRACE_H diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index 2014bd19f28e..96a71a648eed 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -501,6 +501,7 @@ enum dmi_field { DMI_PRODUCT_VERSION, DMI_PRODUCT_SERIAL, DMI_PRODUCT_UUID, + DMI_PRODUCT_SKU, DMI_PRODUCT_FAMILY, DMI_BOARD_VENDOR, DMI_BOARD_NAME, diff --git a/include/linux/platform_data/sc18is602.h b/include/linux/platform_data/sc18is602.h index 997b06634152..18602cab7799 100644 --- a/include/linux/platform_data/sc18is602.h +++ b/include/linux/platform_data/sc18is602.h @@ -7,7 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * For further information, see the Documentation/spi/sc18is602 file. + * For further information, see the Documentation/spi/spi-sc18is602 file. */ /** diff --git a/include/linux/platform_data/shmob_drm.h b/include/linux/platform_data/shmob_drm.h index 7c686d335c12..ee495d707f17 100644 --- a/include/linux/platform_data/shmob_drm.h +++ b/include/linux/platform_data/shmob_drm.h @@ -18,9 +18,6 @@ #include <drm/drm_mode.h> -struct sh_mobile_meram_cfg; -struct sh_mobile_meram_info; - enum shmob_drm_clk_source { SHMOB_DRM_CLK_BUS, SHMOB_DRM_CLK_PERIPHERAL, @@ -93,7 +90,6 @@ struct shmob_drm_platform_data { struct shmob_drm_interface_data iface; struct shmob_drm_panel_data panel; struct shmob_drm_backlight_data backlight; - const struct sh_mobile_meram_cfg *meram; }; #endif /* __SHMOB_DRM_H__ */ diff --git a/include/linux/rculist_nulls.h b/include/linux/rculist_nulls.h index e4b257ff881b..bc8206a8f30e 100644 --- a/include/linux/rculist_nulls.h +++ b/include/linux/rculist_nulls.h @@ -109,7 +109,7 @@ static inline void hlist_nulls_add_head_rcu(struct hlist_nulls_node *n, * * The barrier() is needed to make sure compiler doesn't cache first element [1], * as this loop can be restarted [2] - * [1] Documentation/atomic_ops.txt around line 114 + * [1] Documentation/core-api/atomic_ops.rst around line 114 * [2] Documentation/RCU/rculist_nulls.txt around line 146 */ #define hlist_nulls_for_each_entry_rcu(tpos, pos, head, member) \ diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h index c94f466d57ef..19a690b559ca 100644 --- a/include/linux/tracepoint.h +++ b/include/linux/tracepoint.h @@ -4,7 +4,7 @@ /* * Kernel Tracepoint API. * - * See Documentation/trace/tracepoints.txt. + * See Documentation/trace/tracepoints.rst. * * Copyright (C) 2008-2014 Mathieu Desnoyers <mathieu.desnoyers@efficios.com> * diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h index db9f15f5db04..c0d7ea0bf5b6 100644 --- a/include/uapi/linux/prctl.h +++ b/include/uapi/linux/prctl.h @@ -170,7 +170,7 @@ struct prctl_mm_map { * asking selinux for a specific new context (e.g. with runcon) will result * in execve returning -EPERM. * - * See Documentation/prctl/no_new_privs.txt for more details. + * See Documentation/userspace-api/no_new_privs.rst for more details. */ #define PR_SET_NO_NEW_PRIVS 38 #define PR_GET_NO_NEW_PRIVS 39 diff --git a/include/video/auo_k190xfb.h b/include/video/auo_k190xfb.h deleted file mode 100644 index ac329ee1d753..000000000000 --- a/include/video/auo_k190xfb.h +++ /dev/null @@ -1,107 +0,0 @@ -/* - * Definitions for AUO-K190X framebuffer drivers - * - * Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _LINUX_VIDEO_AUO_K190XFB_H_ -#define _LINUX_VIDEO_AUO_K190XFB_H_ - -/* Controller standby command needs a param */ -#define AUOK190X_QUIRK_STANDBYPARAM (1 << 0) - -/* Controller standby is completely broken */ -#define AUOK190X_QUIRK_STANDBYBROKEN (1 << 1) - -/* - * Resolutions for the displays - */ -#define AUOK190X_RESOLUTION_800_600 0 -#define AUOK190X_RESOLUTION_1024_768 1 -#define AUOK190X_RESOLUTION_600_800 4 -#define AUOK190X_RESOLUTION_768_1024 5 - -/* - * struct used by auok190x. board specific stuff comes from *board - */ -struct auok190xfb_par { - struct fb_info *info; - struct auok190x_board *board; - - struct regulator *regulator; - - struct mutex io_lock; - struct delayed_work work; - wait_queue_head_t waitq; - int resolution; - int rotation; - int consecutive_threshold; - int update_cnt; - - /* panel and controller informations */ - int epd_type; - int panel_size_int; - int panel_size_float; - int panel_model; - int tcon_version; - int lut_version; - - /* individual controller callbacks */ - void (*update_partial)(struct auok190xfb_par *par, u16 y1, u16 y2); - void (*update_all)(struct auok190xfb_par *par); - bool (*need_refresh)(struct auok190xfb_par *par); - void (*init)(struct auok190xfb_par *par); - void (*recover)(struct auok190xfb_par *par); - - int update_mode; /* mode to use for updates */ - int last_mode; /* update mode last used */ - int flash; - - /* power management */ - int autosuspend_delay; - bool standby; - bool manual_standby; -}; - -/** - * Board specific platform-data - * @init: initialize the controller interface - * @cleanup: cleanup the controller interface - * @wait_for_rdy: wait until the controller is not busy anymore - * @set_ctl: change an interface control - * @set_hdb: write a value to the data register - * @get_hdb: read a value from the data register - * @setup_irq: method to setup the irq handling on the busy gpio - * @gpio_nsleep: sleep gpio - * @gpio_nrst: reset gpio - * @gpio_nbusy: busy gpio - * @resolution: one of the AUOK190X_RESOLUTION constants - * @rotation: rotation of the framebuffer - * @quirks: controller quirks to honor - * @fps: frames per second for defio - */ -struct auok190x_board { - int (*init)(struct auok190xfb_par *); - void (*cleanup)(struct auok190xfb_par *); - int (*wait_for_rdy)(struct auok190xfb_par *); - - void (*set_ctl)(struct auok190xfb_par *, unsigned char, u8); - void (*set_hdb)(struct auok190xfb_par *, u16); - u16 (*get_hdb)(struct auok190xfb_par *); - - int (*setup_irq)(struct fb_info *); - - int gpio_nsleep; - int gpio_nrst; - int gpio_nbusy; - - int resolution; - int quirks; - int fps; -}; - -#endif diff --git a/include/video/sh_mobile_lcdc.h b/include/video/sh_mobile_lcdc.h index f706b0fed399..84aa976ca4ea 100644 --- a/include/video/sh_mobile_lcdc.h +++ b/include/video/sh_mobile_lcdc.h @@ -3,7 +3,6 @@ #define __ASM_SH_MOBILE_LCDC_H__ #include <linux/fb.h> -#include <video/sh_mobile_meram.h> /* Register definitions */ #define _LDDCKR 0x410 @@ -184,7 +183,6 @@ struct sh_mobile_lcdc_chan_cfg { struct sh_mobile_lcdc_panel_cfg panel_cfg; struct sh_mobile_lcdc_bl_info bl_info; struct sh_mobile_lcdc_sys_bus_cfg sys_bus_cfg; /* only for SYSn I/F */ - const struct sh_mobile_meram_cfg *meram_cfg; struct platform_device *tx_dev; /* HDMI/DSI transmitter device */ }; @@ -193,7 +191,6 @@ struct sh_mobile_lcdc_info { int clock_source; struct sh_mobile_lcdc_chan_cfg ch[2]; struct sh_mobile_lcdc_overlay_cfg overlays[4]; - struct sh_mobile_meram_info *meram_dev; }; #endif /* __ASM_SH_MOBILE_LCDC_H__ */ diff --git a/include/video/sh_mobile_meram.h b/include/video/sh_mobile_meram.h deleted file mode 100644 index f4efc21e205d..000000000000 --- a/include/video/sh_mobile_meram.h +++ /dev/null @@ -1,95 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __VIDEO_SH_MOBILE_MERAM_H__ -#define __VIDEO_SH_MOBILE_MERAM_H__ - -/* For sh_mobile_meram_info.addr_mode */ -enum { - SH_MOBILE_MERAM_MODE0 = 0, - SH_MOBILE_MERAM_MODE1 -}; - -enum { - SH_MOBILE_MERAM_PF_NV = 0, - SH_MOBILE_MERAM_PF_RGB, - SH_MOBILE_MERAM_PF_NV24 -}; - - -struct sh_mobile_meram_priv; - -/* - * struct sh_mobile_meram_info - MERAM platform data - * @reserved_icbs: Bitmask of reserved ICBs (for instance used through UIO) - */ -struct sh_mobile_meram_info { - int addr_mode; - u32 reserved_icbs; - struct sh_mobile_meram_priv *priv; - struct platform_device *pdev; -}; - -/* icb config */ -struct sh_mobile_meram_icb_cfg { - unsigned int meram_size; /* MERAM Buffer Size to use */ -}; - -struct sh_mobile_meram_cfg { - struct sh_mobile_meram_icb_cfg icb[2]; -}; - -#if defined(CONFIG_FB_SH_MOBILE_MERAM) || \ - defined(CONFIG_FB_SH_MOBILE_MERAM_MODULE) -unsigned long sh_mobile_meram_alloc(struct sh_mobile_meram_info *meram_dev, - size_t size); -void sh_mobile_meram_free(struct sh_mobile_meram_info *meram_dev, - unsigned long mem, size_t size); -void *sh_mobile_meram_cache_alloc(struct sh_mobile_meram_info *dev, - const struct sh_mobile_meram_cfg *cfg, - unsigned int xres, unsigned int yres, - unsigned int pixelformat, - unsigned int *pitch); -void sh_mobile_meram_cache_free(struct sh_mobile_meram_info *dev, void *data); -void sh_mobile_meram_cache_update(struct sh_mobile_meram_info *dev, void *data, - unsigned long base_addr_y, - unsigned long base_addr_c, - unsigned long *icb_addr_y, - unsigned long *icb_addr_c); -#else -static inline unsigned long -sh_mobile_meram_alloc(struct sh_mobile_meram_info *meram_dev, size_t size) -{ - return 0; -} - -static inline void -sh_mobile_meram_free(struct sh_mobile_meram_info *meram_dev, - unsigned long mem, size_t size) -{ -} - -static inline void * -sh_mobile_meram_cache_alloc(struct sh_mobile_meram_info *dev, - const struct sh_mobile_meram_cfg *cfg, - unsigned int xres, unsigned int yres, - unsigned int pixelformat, - unsigned int *pitch) -{ - return ERR_PTR(-ENODEV); -} - -static inline void -sh_mobile_meram_cache_free(struct sh_mobile_meram_info *dev, void *data) -{ -} - -static inline void -sh_mobile_meram_cache_update(struct sh_mobile_meram_info *dev, void *data, - unsigned long base_addr_y, - unsigned long base_addr_c, - unsigned long *icb_addr_y, - unsigned long *icb_addr_c) -{ -} -#endif - -#endif /* __VIDEO_SH_MOBILE_MERAM_H__ */ diff --git a/include/xen/interface/io/kbdif.h b/include/xen/interface/io/kbdif.h index 2a9510ade701..e2340a4130cf 100644 --- a/include/xen/interface/io/kbdif.h +++ b/include/xen/interface/io/kbdif.h @@ -317,7 +317,7 @@ struct xenkbd_position { * Linux [2] and Windows [3] multi-touch support. * * [1] https://cgit.freedesktop.org/wayland/wayland/tree/protocol/wayland.xml - * [2] https://www.kernel.org/doc/Documentation/input/multi-touch-protocol.txt + * [2] https://www.kernel.org/doc/Documentation/input/multi-touch-protocol.rst * [3] https://msdn.microsoft.com/en-us/library/jj151564(v=vs.85).aspx * * diff --git a/init/Kconfig b/init/Kconfig index 5a52f07259a2..fde3d09e8b27 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -1719,10 +1719,6 @@ source "arch/Kconfig" endmenu # General setup -config HAVE_GENERIC_DMA_COHERENT - bool - default n - config RT_MUTEXES bool diff --git a/kernel/Makefile b/kernel/Makefile index d2001624fe7a..04bc07c2b42a 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -41,6 +41,7 @@ obj-y += printk/ obj-y += irq/ obj-y += rcu/ obj-y += livepatch/ +obj-y += dma/ obj-$(CONFIG_CHECKPOINT_RESTORE) += kcmp.o obj-$(CONFIG_FREEZER) += freezer.o diff --git a/kernel/audit_fsnotify.c b/kernel/audit_fsnotify.c index 52f368b6561e..fba78047fb37 100644 --- a/kernel/audit_fsnotify.c +++ b/kernel/audit_fsnotify.c @@ -109,7 +109,7 @@ struct audit_fsnotify_mark *audit_alloc_mark(struct audit_krule *krule, char *pa audit_update_mark(audit_mark, dentry->d_inode); audit_mark->rule = krule; - ret = fsnotify_add_mark(&audit_mark->mark, inode, NULL, true); + ret = fsnotify_add_inode_mark(&audit_mark->mark, inode, true); if (ret < 0) { fsnotify_put_mark(&audit_mark->mark); audit_mark = ERR_PTR(ret); @@ -165,12 +165,11 @@ static void audit_autoremove_mark_rule(struct audit_fsnotify_mark *audit_mark) /* Update mark data in audit rules based on fsnotify events. */ static int audit_mark_handle_event(struct fsnotify_group *group, struct inode *to_tell, - struct fsnotify_mark *inode_mark, - struct fsnotify_mark *vfsmount_mark, u32 mask, const void *data, int data_type, const unsigned char *dname, u32 cookie, struct fsnotify_iter_info *iter_info) { + struct fsnotify_mark *inode_mark = fsnotify_iter_inode_mark(iter_info); struct audit_fsnotify_mark *audit_mark; const struct inode *inode = NULL; diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c index 67e6956c0b61..c99ebaae5abc 100644 --- a/kernel/audit_tree.c +++ b/kernel/audit_tree.c @@ -288,8 +288,8 @@ static void untag_chunk(struct node *p) if (!new) goto Fallback; - if (fsnotify_add_mark_locked(&new->mark, entry->connector->inode, - NULL, 1)) { + if (fsnotify_add_inode_mark_locked(&new->mark, entry->connector->inode, + 1)) { fsnotify_put_mark(&new->mark); goto Fallback; } @@ -354,7 +354,7 @@ static int create_chunk(struct inode *inode, struct audit_tree *tree) return -ENOMEM; entry = &chunk->mark; - if (fsnotify_add_mark(entry, inode, NULL, 0)) { + if (fsnotify_add_inode_mark(entry, inode, 0)) { fsnotify_put_mark(entry); return -ENOSPC; } @@ -434,8 +434,8 @@ static int tag_chunk(struct inode *inode, struct audit_tree *tree) return -ENOENT; } - if (fsnotify_add_mark_locked(chunk_entry, - old_entry->connector->inode, NULL, 1)) { + if (fsnotify_add_inode_mark_locked(chunk_entry, + old_entry->connector->inode, 1)) { spin_unlock(&old_entry->lock); mutex_unlock(&old_entry->group->mark_mutex); fsnotify_put_mark(chunk_entry); @@ -989,8 +989,6 @@ static void evict_chunk(struct audit_chunk *chunk) static int audit_tree_handle_event(struct fsnotify_group *group, struct inode *to_tell, - struct fsnotify_mark *inode_mark, - struct fsnotify_mark *vfsmount_mark, u32 mask, const void *data, int data_type, const unsigned char *file_name, u32 cookie, struct fsnotify_iter_info *iter_info) diff --git a/kernel/audit_watch.c b/kernel/audit_watch.c index f1ba88994508..c17c0c268436 100644 --- a/kernel/audit_watch.c +++ b/kernel/audit_watch.c @@ -160,7 +160,7 @@ static struct audit_parent *audit_init_parent(struct path *path) fsnotify_init_mark(&parent->mark, audit_watch_group); parent->mark.mask = AUDIT_FS_WATCH; - ret = fsnotify_add_mark(&parent->mark, inode, NULL, 0); + ret = fsnotify_add_inode_mark(&parent->mark, inode, 0); if (ret < 0) { audit_free_parent(parent); return ERR_PTR(ret); @@ -472,12 +472,11 @@ void audit_remove_watch_rule(struct audit_krule *krule) /* Update watch data in audit rules based on fsnotify events. */ static int audit_watch_handle_event(struct fsnotify_group *group, struct inode *to_tell, - struct fsnotify_mark *inode_mark, - struct fsnotify_mark *vfsmount_mark, u32 mask, const void *data, int data_type, const unsigned char *dname, u32 cookie, struct fsnotify_iter_info *iter_info) { + struct fsnotify_mark *inode_mark = fsnotify_iter_inode_mark(iter_info); const struct inode *inode; struct audit_parent *parent; diff --git a/kernel/cgroup/cpuset.c b/kernel/cgroup/cpuset.c index d8b12e0d39cd..266f10cb7222 100644 --- a/kernel/cgroup/cpuset.c +++ b/kernel/cgroup/cpuset.c @@ -605,7 +605,7 @@ static inline int nr_cpusets(void) * load balancing domains (sched domains) as specified by that partial * partition. * - * See "What is sched_load_balance" in Documentation/cgroups/cpusets.txt + * See "What is sched_load_balance" in Documentation/cgroup-v1/cpusets.txt * for a background explanation of this. * * Does not return errors, on the theory that the callers of this diff --git a/kernel/dma/Kconfig b/kernel/dma/Kconfig new file mode 100644 index 000000000000..9bd54304446f --- /dev/null +++ b/kernel/dma/Kconfig @@ -0,0 +1,50 @@ + +config HAS_DMA + bool + depends on !NO_DMA + default y + +config NEED_SG_DMA_LENGTH + bool + +config NEED_DMA_MAP_STATE + bool + +config ARCH_DMA_ADDR_T_64BIT + def_bool 64BIT || PHYS_ADDR_T_64BIT + +config HAVE_GENERIC_DMA_COHERENT + bool + +config ARCH_HAS_SYNC_DMA_FOR_DEVICE + bool + +config ARCH_HAS_SYNC_DMA_FOR_CPU + bool + select NEED_DMA_MAP_STATE + +config DMA_DIRECT_OPS + bool + depends on HAS_DMA + +config DMA_NONCOHERENT_OPS + bool + depends on HAS_DMA + select DMA_DIRECT_OPS + +config DMA_NONCOHERENT_MMAP + bool + depends on DMA_NONCOHERENT_OPS + +config DMA_NONCOHERENT_CACHE_SYNC + bool + depends on DMA_NONCOHERENT_OPS + +config DMA_VIRT_OPS + bool + depends on HAS_DMA + +config SWIOTLB + bool + select DMA_DIRECT_OPS + select NEED_DMA_MAP_STATE diff --git a/kernel/dma/Makefile b/kernel/dma/Makefile new file mode 100644 index 000000000000..6de44e4eb454 --- /dev/null +++ b/kernel/dma/Makefile @@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0 + +obj-$(CONFIG_HAS_DMA) += mapping.o +obj-$(CONFIG_DMA_CMA) += contiguous.o +obj-$(CONFIG_HAVE_GENERIC_DMA_COHERENT) += coherent.o +obj-$(CONFIG_DMA_DIRECT_OPS) += direct.o +obj-$(CONFIG_DMA_NONCOHERENT_OPS) += noncoherent.o +obj-$(CONFIG_DMA_VIRT_OPS) += virt.o +obj-$(CONFIG_DMA_API_DEBUG) += debug.o +obj-$(CONFIG_SWIOTLB) += swiotlb.o + diff --git a/drivers/base/dma-coherent.c b/kernel/dma/coherent.c index 597d40893862..597d40893862 100644 --- a/drivers/base/dma-coherent.c +++ b/kernel/dma/coherent.c diff --git a/drivers/base/dma-contiguous.c b/kernel/dma/contiguous.c index d987dcd1bd56..d987dcd1bd56 100644 --- a/drivers/base/dma-contiguous.c +++ b/kernel/dma/contiguous.c diff --git a/lib/dma-debug.c b/kernel/dma/debug.c index c007d25bee09..c007d25bee09 100644 --- a/lib/dma-debug.c +++ b/kernel/dma/debug.c diff --git a/lib/dma-direct.c b/kernel/dma/direct.c index 8be8106270c2..8be8106270c2 100644 --- a/lib/dma-direct.c +++ b/kernel/dma/direct.c diff --git a/drivers/base/dma-mapping.c b/kernel/dma/mapping.c index f831a582209c..d2a92ddaac4d 100644 --- a/drivers/base/dma-mapping.c +++ b/kernel/dma/mapping.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * drivers/base/dma-mapping.c - arch-independent dma-mapping routines + * arch-independent dma-mapping routines * * Copyright (c) 2006 SUSE Linux Products GmbH * Copyright (c) 2006 Tejun Heo <teheo@suse.de> diff --git a/lib/dma-noncoherent.c b/kernel/dma/noncoherent.c index 79e9a757387f..79e9a757387f 100644 --- a/lib/dma-noncoherent.c +++ b/kernel/dma/noncoherent.c diff --git a/lib/swiotlb.c b/kernel/dma/swiotlb.c index 04b68d9dffac..04b68d9dffac 100644 --- a/lib/swiotlb.c +++ b/kernel/dma/swiotlb.c diff --git a/lib/dma-virt.c b/kernel/dma/virt.c index 8e61a02ef9ca..631ddec4b60a 100644 --- a/lib/dma-virt.c +++ b/kernel/dma/virt.c @@ -1,7 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 /* - * lib/dma-virt.c - * * DMA operations that map to virtual addresses without flushing memory. */ #include <linux/export.h> diff --git a/kernel/power/main.c b/kernel/power/main.c index 705c2366dafe..d9706da10930 100644 --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -455,8 +455,9 @@ struct kobject *power_kobj; * state - control system sleep states. * * show() returns available sleep state labels, which may be "mem", "standby", - * "freeze" and "disk" (hibernation). See Documentation/power/states.txt for a - * description of what they mean. + * "freeze" and "disk" (hibernation). + * See Documentation/admin-guide/pm/sleep-states.rst for a description of + * what they mean. * * store() accepts one of those strings, translates it into the proper * enumerated value, and initiates a suspend transition. diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig index dd6c0a2ad969..dcc0166d1997 100644 --- a/kernel/trace/Kconfig +++ b/kernel/trace/Kconfig @@ -12,22 +12,22 @@ config NOP_TRACER config HAVE_FTRACE_NMI_ENTER bool help - See Documentation/trace/ftrace-design.txt + See Documentation/trace/ftrace-design.rst config HAVE_FUNCTION_TRACER bool help - See Documentation/trace/ftrace-design.txt + See Documentation/trace/ftrace-design.rst config HAVE_FUNCTION_GRAPH_TRACER bool help - See Documentation/trace/ftrace-design.txt + See Documentation/trace/ftrace-design.rst config HAVE_DYNAMIC_FTRACE bool help - See Documentation/trace/ftrace-design.txt + See Documentation/trace/ftrace-design.rst config HAVE_DYNAMIC_FTRACE_WITH_REGS bool @@ -35,12 +35,12 @@ config HAVE_DYNAMIC_FTRACE_WITH_REGS config HAVE_FTRACE_MCOUNT_RECORD bool help - See Documentation/trace/ftrace-design.txt + See Documentation/trace/ftrace-design.rst config HAVE_SYSCALL_TRACEPOINTS bool help - See Documentation/trace/ftrace-design.txt + See Documentation/trace/ftrace-design.rst config HAVE_FENTRY bool @@ -448,7 +448,7 @@ config KPROBE_EVENTS help This allows the user to add tracing events (similar to tracepoints) on the fly via the ftrace interface. See - Documentation/trace/kprobetrace.txt for more details. + Documentation/trace/kprobetrace.rst for more details. Those events can be inserted wherever kprobes can probe, and record various register and memory values. @@ -575,7 +575,7 @@ config MMIOTRACE implementation and works via page faults. Tracing is disabled by default and can be enabled at run-time. - See Documentation/trace/mmiotrace.txt. + See Documentation/trace/mmiotrace.rst. If you are not helping to develop drivers, say N. config TRACING_MAP diff --git a/lib/Kconfig b/lib/Kconfig index 809fdd155739..706836ec314d 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -405,7 +405,7 @@ config ASSOCIATIVE_ARRAY See: - Documentation/assoc_array.txt + Documentation/core-api/assoc_array.rst for more information. @@ -420,60 +420,15 @@ config HAS_IOPORT_MAP depends on HAS_IOMEM && !NO_IOPORT_MAP default y -config HAS_DMA - bool - depends on !NO_DMA - default y +source "kernel/dma/Kconfig" config SGL_ALLOC bool default n -config NEED_SG_DMA_LENGTH - bool - -config NEED_DMA_MAP_STATE - bool - -config ARCH_DMA_ADDR_T_64BIT - def_bool 64BIT || PHYS_ADDR_T_64BIT - config IOMMU_HELPER bool -config ARCH_HAS_SYNC_DMA_FOR_DEVICE - bool - -config ARCH_HAS_SYNC_DMA_FOR_CPU - bool - select NEED_DMA_MAP_STATE - -config DMA_DIRECT_OPS - bool - depends on HAS_DMA - -config DMA_NONCOHERENT_OPS - bool - depends on HAS_DMA - select DMA_DIRECT_OPS - -config DMA_NONCOHERENT_MMAP - bool - depends on DMA_NONCOHERENT_OPS - -config DMA_NONCOHERENT_CACHE_SYNC - bool - depends on DMA_NONCOHERENT_OPS - -config DMA_VIRT_OPS - bool - depends on HAS_DMA - -config SWIOTLB - bool - select DMA_DIRECT_OPS - select NEED_DMA_MAP_STATE - config CHECK_SIGNATURE bool diff --git a/lib/Makefile b/lib/Makefile index 956b320292fe..8153fdab287f 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -29,9 +29,6 @@ lib-y := ctype.o string.o vsprintf.o cmdline.o \ lib-$(CONFIG_PRINTK) += dump_stack.o lib-$(CONFIG_MMU) += ioremap.o lib-$(CONFIG_SMP) += cpumask.o -lib-$(CONFIG_DMA_DIRECT_OPS) += dma-direct.o -lib-$(CONFIG_DMA_NONCOHERENT_OPS) += dma-noncoherent.o -lib-$(CONFIG_DMA_VIRT_OPS) += dma-virt.o lib-y += kobject.o klist.o obj-y += lockref.o @@ -148,7 +145,6 @@ obj-$(CONFIG_SMP) += percpu_counter.o obj-$(CONFIG_AUDIT_GENERIC) += audit.o obj-$(CONFIG_AUDIT_COMPAT_GENERIC) += compat_audit.o -obj-$(CONFIG_SWIOTLB) += swiotlb.o obj-$(CONFIG_IOMMU_HELPER) += iommu-helper.o obj-$(CONFIG_FAULT_INJECTION) += fault-inject.o obj-$(CONFIG_NOTIFIER_ERROR_INJECTION) += notifier-error-inject.o @@ -169,8 +165,6 @@ obj-$(CONFIG_NLATTR) += nlattr.o obj-$(CONFIG_LRU_CACHE) += lru_cache.o -obj-$(CONFIG_DMA_API_DEBUG) += dma-debug.o - obj-$(CONFIG_GENERIC_CSUM) += checksum.o obj-$(CONFIG_GENERIC_ATOMIC64) += atomic64.o diff --git a/mm/memblock.c b/mm/memblock.c index cc16d70b8333..03d48d8835ba 100644 --- a/mm/memblock.c +++ b/mm/memblock.c @@ -20,7 +20,6 @@ #include <linux/kmemleak.h> #include <linux/seq_file.h> #include <linux/memblock.h> -#include <linux/bootmem.h> #include <asm/sections.h> #include <linux/io.h> diff --git a/scripts/documentation-file-ref-check b/scripts/documentation-file-ref-check index 2520bc14ffac..078999a3fdff 100755 --- a/scripts/documentation-file-ref-check +++ b/scripts/documentation-file-ref-check @@ -21,7 +21,7 @@ GetOptions( ); if ($help != 0) { - print "$scriptname [--help] [--fix-rst]\n"; + print "$scriptname [--help] [--fix]\n"; exit -1; } @@ -38,16 +38,31 @@ while (<IN>) { my $f = $1; my $ln = $2; - # Makefiles contain nasty expressions to parse docs - next if ($f =~ m/Makefile/); + # Makefiles and scripts contain nasty expressions to parse docs + next if ($f =~ m/Makefile/ || $f =~ m/\.sh$/); + # Skip this script next if ($f eq $scriptname); - if ($ln =~ m,\b(\S*)(Documentation/[A-Za-z0-9\_\.\,\~/\*+-]*),) { + if ($ln =~ m,\b(\S*)(Documentation/[A-Za-z0-9\_\.\,\~/\*\[\]\?+-]*)(.*),) { my $prefix = $1; my $ref = $2; my $base = $2; + my $extra = $3; + + # some file references are like: + # /usr/src/linux/Documentation/DMA-{API,mapping}.txt + # For now, ignore them + next if ($extra =~ m/^{/); + + # Remove footnotes at the end like: + # Documentation/devicetree/dt-object-internal.txt[1] + $ref =~ s/(txt|rst)\[\d+]$/$1/; + + # Remove ending ']' without any '[' + $ref =~ s/\].*// if (!($ref =~ m/\[/)); + # Remove puntuation marks at the end $ref =~ s/[\,\.]+$//; my $fulref = "$prefix$ref"; @@ -63,8 +78,15 @@ while (<IN>) { # Check if exists, evaluating wildcards next if (grep -e, glob("$ref $fulref")); + # Accept relative Documentation patches for tools/ + if ($f =~ m/tools/) { + my $path = $f; + $path =~ s,(.*)/.*,$1,; + next if (grep -e, glob("$path/$ref $path/$fulref")); + } + if ($fix) { - if (!($ref =~ m/(devicetree|scripts|Kconfig|Kbuild)/)) { + if (!($ref =~ m/(scripts|Kconfig|Kbuild)/)) { $broken_ref{$ref}++; } } else { @@ -84,10 +106,19 @@ foreach my $ref (keys %broken_ref) { # get just the basename $new =~ s,.*/,,; - # Seek for the same name on another place, as it may have been moved my $f=""; - $f = qx(find . -iname $new) if ($new); + # usual reason for breakage: DT file moved around + if ($ref =~ /devicetree/) { + my $search = $new; + $search =~ s,^.*/,,; + $f = qx(find Documentation/devicetree/ -iname "*$search*") if ($search); + if (!$f) { + # Manufacturer name may have changed + $search =~ s/^.*,//; + $f = qx(find Documentation/devicetree/ -iname "*$search*") if ($search); + } + } # usual reason for breakage: file renamed to .rst if (!$f) { @@ -95,6 +126,17 @@ foreach my $ref (keys %broken_ref) { $f=qx(find . -iname $new) if ($new); } + # usual reason for breakage: use dash or underline + if (!$f) { + $new =~ s/[-_]/[-_]/g; + $f=qx(find . -iname $new) if ($new); + } + + # Wild guess: seek for the same name on another place + if (!$f) { + $f = qx(find . -iname $new) if ($new); + } + my @find = split /\s+/, $f; if (!$f) { diff --git a/security/device_cgroup.c b/security/device_cgroup.c index c65b39bafdfe..cd97929fac66 100644 --- a/security/device_cgroup.c +++ b/security/device_cgroup.c @@ -509,7 +509,7 @@ static inline int may_allow_all(struct dev_cgroup *parent) * This is one of the three key functions for hierarchy implementation. * This function is responsible for re-evaluating all the cgroup's active * exceptions due to a parent's exception change. - * Refer to Documentation/cgroups/devices.txt for more details. + * Refer to Documentation/cgroup-v1/devices.txt for more details. */ static void revalidate_active_exceptions(struct dev_cgroup *devcg) { diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 9a46dc24ac10..2b5ee5fbd652 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -4728,7 +4728,7 @@ err_af: } /* This supports connect(2) and SCTP connect services such as sctp_connectx(3) - * and sctp_sendmsg(3) as described in Documentation/security/LSM-sctp.txt + * and sctp_sendmsg(3) as described in Documentation/security/LSM-sctp.rst */ static int selinux_socket_connect_helper(struct socket *sock, struct sockaddr *address, int addrlen) diff --git a/sound/core/Kconfig b/sound/core/Kconfig index 6e937a8146a1..63b3ef9c83f5 100644 --- a/sound/core/Kconfig +++ b/sound/core/Kconfig @@ -48,7 +48,7 @@ config SND_MIXER_OSS depends on SND_OSSEMUL help To enable OSS mixer API emulation (/dev/mixer*), say Y here - and read <file:Documentation/sound/alsa/OSS-Emulation.txt>. + and read <file:Documentation/sound/designs/oss-emulation.rst>. Many programs still use the OSS API, so say Y. @@ -61,7 +61,7 @@ config SND_PCM_OSS select SND_PCM help To enable OSS digital audio (PCM) emulation (/dev/dsp*), say Y - here and read <file:Documentation/sound/alsa/OSS-Emulation.txt>. + here and read <file:Documentation/sound/designs/oss-emulation.rst>. Many programs still use the OSS API, so say Y. diff --git a/sound/drivers/Kconfig b/sound/drivers/Kconfig index 7144cc36e8ae..648a12da44f9 100644 --- a/sound/drivers/Kconfig +++ b/sound/drivers/Kconfig @@ -153,7 +153,7 @@ config SND_SERIAL_U16550 select SND_RAWMIDI help To include support for MIDI serial port interfaces, say Y here - and read <file:Documentation/sound/alsa/serial-u16550.txt>. + and read <file:Documentation/sound/cards/serial-u16550.rst>. This driver works with serial UARTs 16550 and better. This driver accesses the serial port hardware directly, so @@ -223,7 +223,7 @@ config SND_AC97_POWER_SAVE the device frequently. A value of 10 seconds would be a good choice for normal operations. - See Documentation/sound/alsa/powersave.txt for more details. + See Documentation/sound/designs/powersave.rst for more details. config SND_AC97_POWER_SAVE_DEFAULT int "Default time-out for AC97 power-save mode" diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig index d9f3fdb777e4..4105d9f653d9 100644 --- a/sound/pci/Kconfig +++ b/sound/pci/Kconfig @@ -175,7 +175,7 @@ config SND_BT87X help If you want to record audio from TV cards based on Brooktree Bt878/Bt879 chips, say Y here and read - <file:Documentation/sound/alsa/Bt87x.txt>. + <file:Documentation/sound/cards/bt87x.rst>. To compile this driver as a module, choose M here: the module will be called snd-bt87x. @@ -210,7 +210,7 @@ config SND_CMIPCI help If you want to use soundcards based on C-Media CMI8338, CMI8738, CMI8768 or CMI8770 chips, say Y here and read - <file:Documentation/sound/alsa/CMIPCI.txt>. + <file:Documentation/sound/cards/cmipci.rst>. To compile this driver as a module, choose M here: the module will be called snd-cmipci. @@ -472,8 +472,8 @@ config SND_EMU10K1 Audigy and E-mu APS (partially supported) soundcards. The confusing multitude of mixer controls is documented in - <file:Documentation/sound/alsa/SB-Live-mixer.txt> and - <file:Documentation/sound/alsa/Audigy-mixer.txt>. + <file:Documentation/sound/cards/sb-live-mixer.rst> and + <file:Documentation/sound/cards/audigy-mixer.rst>. To compile this driver as a module, choose M here: the module will be called snd-emu10k1. @@ -735,7 +735,7 @@ config SND_MIXART select SND_PCM help If you want to use Digigram miXart soundcards, say Y here and - read <file:Documentation/sound/alsa/MIXART.txt>. + read <file:Documentation/sound/cards/mixart.rst>. To compile this driver as a module, choose M here: the module will be called snd-mixart. diff --git a/tools/include/uapi/linux/prctl.h b/tools/include/uapi/linux/prctl.h index db9f15f5db04..c0d7ea0bf5b6 100644 --- a/tools/include/uapi/linux/prctl.h +++ b/tools/include/uapi/linux/prctl.h @@ -170,7 +170,7 @@ struct prctl_mm_map { * asking selinux for a specific new context (e.g. with runcon) will result * in execve returning -EPERM. * - * See Documentation/prctl/no_new_privs.txt for more details. + * See Documentation/userspace-api/no_new_privs.rst for more details. */ #define PR_SET_NO_NEW_PRIVS 38 #define PR_GET_NO_NEW_PRIVS 39 diff --git a/tools/lib/api/fs/fs.c b/tools/lib/api/fs/fs.c index 6a12bbf39f7b..7aba8243a0e7 100644 --- a/tools/lib/api/fs/fs.c +++ b/tools/lib/api/fs/fs.c @@ -201,7 +201,7 @@ static void mem_toupper(char *f, size_t len) /* * Check for "NAME_PATH" environment variable to override fs location (for - * testing). This matches the recommendation in Documentation/sysfs-rules.txt + * testing). This matches the recommendation in Documentation/admin-guide/sysfs-rules.rst * for SYSFS_PATH. */ static bool fs__env_override(struct fs *fs) diff --git a/tools/perf/util/bpf-prologue.c b/tools/perf/util/bpf-prologue.c index 29347756b0af..77e4891e17b0 100644 --- a/tools/perf/util/bpf-prologue.c +++ b/tools/perf/util/bpf-prologue.c @@ -61,7 +61,7 @@ check_pos(struct bpf_insn_pos *pos) /* * Convert type string (u8/u16/u32/u64/s8/s16/s32/s64 ..., see - * Documentation/trace/kprobetrace.txt) to size field of BPF_LDX_MEM + * Documentation/trace/kprobetrace.rst) to size field of BPF_LDX_MEM * instruction (BPF_{B,H,W,DW}). */ static int diff --git a/tools/power/pm-graph/config/custom-timeline-functions.cfg b/tools/power/pm-graph/config/custom-timeline-functions.cfg index 4f80ad7d7275..f8fcb06fd68b 100644 --- a/tools/power/pm-graph/config/custom-timeline-functions.cfg +++ b/tools/power/pm-graph/config/custom-timeline-functions.cfg @@ -105,7 +105,7 @@ override-dev-timeline-functions: true # example: [color=#CC00CC] # # arglist: A list of arguments from registers/stack addresses. See URL: -# https://www.kernel.org/doc/Documentation/trace/kprobetrace.txt +# https://www.kernel.org/doc/Documentation/trace/kprobetrace.rst # # example: cpu=%di:s32 # @@ -170,7 +170,7 @@ pm_restore_console: # example: [color=#CC00CC] # # arglist: A list of arguments from registers/stack addresses. See URL: -# https://www.kernel.org/doc/Documentation/trace/kprobetrace.txt +# https://www.kernel.org/doc/Documentation/trace/kprobetrace.rst # # example: port=+36(%di):s32 # |