diff options
| -rw-r--r-- | Documentation/devicetree/bindings/net/fsl-enetc.txt | 69 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 17 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 35 | ||||
| -rw-r--r-- | drivers/net/ethernet/freescale/enetc/Makefile | 3 | ||||
| -rw-r--r-- | drivers/net/ethernet/freescale/enetc/enetc_mdio.c | 199 | ||||
| -rw-r--r-- | drivers/net/ethernet/freescale/enetc/enetc_pf.c | 12 | ||||
| -rw-r--r-- | drivers/net/ethernet/freescale/enetc/enetc_pf.h | 6 |
7 files changed, 340 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/net/fsl-enetc.txt b/Documentation/devicetree/bindings/net/fsl-enetc.txt new file mode 100644 index 000000000000..c812e25ae90f --- /dev/null +++ b/Documentation/devicetree/bindings/net/fsl-enetc.txt @@ -0,0 +1,69 @@ +* ENETC ethernet device tree bindings + +Depending on board design and ENETC port type (internal or +external) there are two supported link modes specified by +below device tree bindings. + +Required properties: + +- reg : Specifies PCIe Device Number and Function + Number of the ENETC endpoint device, according + to parent node bindings. +- compatible : Should be "fsl,enetc". + +1) The ENETC external port is connected to a MDIO configurable phy: + +In this case, the ENETC node should include a "mdio" sub-node +that in turn should contain the "ethernet-phy" node describing the +external phy. Below properties are required, their bindings +already defined in ethernet.txt or phy.txt, under +Documentation/devicetree/bindings/net/*. + +Required: + +- phy-handle : Phandle to a PHY on the MDIO bus. + Defined in ethernet.txt. + +- phy-connection-type : Defined in ethernet.txt. + +- mdio : "mdio" node, defined in mdio.txt. + +- ethernet-phy : "ethernet-phy" node, defined in phy.txt. + +Example: + + ethernet@0,0 { + compatible = "fsl,enetc"; + reg = <0x000000 0 0 0 0>; + phy-handle = <&sgmii_phy0>; + phy-connection-type = "sgmii"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + sgmii_phy0: ethernet-phy@2 { + reg = <0x2>; + }; + }; + }; + +2) The ENETC port is an internal port or has a fixed-link external +connection: + +In this case, the ENETC port node defines a fixed link connection, +as specified by "fixed-link.txt", under +Documentation/devicetree/bindings/net/*. + +Required: + +- fixed-link : "fixed-link" node, defined in "fixed-link.txt". + +Example: + ethernet@0,2 { + compatible = "fsl,enetc"; + reg = <0x000200 0 0 0 0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts index fdeb4176fc33..f86b054a74ae 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts @@ -71,3 +71,20 @@ &duart1 { status = "okay"; }; + +&enetc_port0 { + phy-handle = <&sgmii_phy0>; + phy-connection-type = "sgmii"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + sgmii_phy0: ethernet-phy@2 { + reg = <0x2>; + }; + }; +}; + +&enetc_port1 { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index a8cf92af05fb..2896bbcfa3bb 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -335,5 +335,40 @@ <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; }; + + pcie@1f0000000 { /* Integrated Endpoint Root Complex */ + compatible = "pci-host-ecam-generic"; + reg = <0x01 0xf0000000 0x0 0x100000>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + msi-parent = <&its>; + device_type = "pci"; + bus-range = <0x0 0x0>; + dma-coherent; + msi-map = <0 &its 0x17 0xe>; + iommu-map = <0 &smmu 0x17 0xe>; + /* PF0-6 BAR0 - non-prefetchable memory */ + ranges = <0x82000000 0x0 0x00000000 0x1 0xf8000000 0x0 0x160000 + /* PF0-6 BAR2 - prefetchable memory */ + 0xc2000000 0x0 0x00000000 0x1 0xf8160000 0x0 0x070000 + /* PF0: VF0-1 BAR0 - non-prefetchable memory */ + 0x82000000 0x0 0x00000000 0x1 0xf81d0000 0x0 0x020000 + /* PF0: VF0-1 BAR2 - prefetchable memory */ + 0xc2000000 0x0 0x00000000 0x1 0xf81f0000 0x0 0x020000 + /* PF1: VF0-1 BAR0 - non-prefetchable memory */ + 0x82000000 0x0 0x00000000 0x1 0xf8210000 0x0 0x020000 + /* PF1: VF0-1 BAR2 - prefetchable memory */ + 0xc2000000 0x0 0x00000000 0x1 0xf8230000 0x0 0x020000>; + + enetc_port0: ethernet@0,0 { + compatible = "fsl,enetc"; + reg = <0x000000 0 0 0 0>; + }; + enetc_port1: ethernet@0,1 { + compatible = "fsl,enetc"; + reg = <0x000100 0 0 0 0>; + }; + }; }; }; diff --git a/drivers/net/ethernet/freescale/enetc/Makefile b/drivers/net/ethernet/freescale/enetc/Makefile index 697660294dbc..7139e414dccf 100644 --- a/drivers/net/ethernet/freescale/enetc/Makefile +++ b/drivers/net/ethernet/freescale/enetc/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_FSL_ENETC) += fsl-enetc.o -fsl-enetc-$(CONFIG_FSL_ENETC) += enetc.o enetc_cbdr.o enetc_ethtool.o +fsl-enetc-$(CONFIG_FSL_ENETC) += enetc.o enetc_cbdr.o enetc_ethtool.o \ + enetc_mdio.o fsl-enetc-$(CONFIG_PCI_IOV) += enetc_msg.o fsl-enetc-objs := enetc_pf.o $(fsl-enetc-y) diff --git a/drivers/net/ethernet/freescale/enetc/enetc_mdio.c b/drivers/net/ethernet/freescale/enetc/enetc_mdio.c new file mode 100644 index 000000000000..77b9cd10ba2b --- /dev/null +++ b/drivers/net/ethernet/freescale/enetc/enetc_mdio.c @@ -0,0 +1,199 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* Copyright 2019 NXP */ + +#include <linux/mdio.h> +#include <linux/of_mdio.h> +#include <linux/iopoll.h> +#include <linux/of.h> + +#include "enetc_pf.h" + +struct enetc_mdio_regs { + u32 mdio_cfg; /* MDIO configuration and status */ + u32 mdio_ctl; /* MDIO control */ + u32 mdio_data; /* MDIO data */ + u32 mdio_addr; /* MDIO address */ +}; + +#define bus_to_enetc_regs(bus) (struct enetc_mdio_regs __iomem *)((bus)->priv) + +#define ENETC_MDIO_REG_OFFSET 0x1c00 +#define ENETC_MDC_DIV 258 + +#define MDIO_CFG_CLKDIV(x) ((((x) >> 1) & 0xff) << 8) +#define MDIO_CFG_BSY BIT(0) +#define MDIO_CFG_RD_ER BIT(1) +#define MDIO_CFG_ENC45 BIT(6) + /* external MDIO only - driven on neg MDC edge */ +#define MDIO_CFG_NEG BIT(23) + +#define MDIO_CTL_DEV_ADDR(x) ((x) & 0x1f) +#define MDIO_CTL_PORT_ADDR(x) (((x) & 0x1f) << 5) +#define MDIO_CTL_READ BIT(15) +#define MDIO_DATA(x) ((x) & 0xffff) + +#define TIMEOUT 1000 +static int enetc_mdio_wait_complete(struct enetc_mdio_regs __iomem *regs) +{ + u32 val; + + return readx_poll_timeout(enetc_rd_reg, ®s->mdio_cfg, val, + !(val & MDIO_CFG_BSY), 10, 10 * TIMEOUT); +} + +static int enetc_mdio_write(struct mii_bus *bus, int phy_id, int regnum, + u16 value) +{ + struct enetc_mdio_regs __iomem *regs = bus_to_enetc_regs(bus); + u32 mdio_ctl, mdio_cfg; + u16 dev_addr; + int ret; + + mdio_cfg = MDIO_CFG_CLKDIV(ENETC_MDC_DIV) | MDIO_CFG_NEG; + if (regnum & MII_ADDR_C45) { + dev_addr = (regnum >> 16) & 0x1f; + mdio_cfg |= MDIO_CFG_ENC45; + } else { + /* clause 22 (ie 1G) */ + dev_addr = regnum & 0x1f; + mdio_cfg &= ~MDIO_CFG_ENC45; + } + + enetc_wr_reg(®s->mdio_cfg, mdio_cfg); + + ret = enetc_mdio_wait_complete(regs); + if (ret) + return ret; + + /* set port and dev addr */ + mdio_ctl = MDIO_CTL_PORT_ADDR(phy_id) | MDIO_CTL_DEV_ADDR(dev_addr); + enetc_wr_reg(®s->mdio_ctl, mdio_ctl); + + /* set the register address */ + if (regnum & MII_ADDR_C45) { + enetc_wr_reg(®s->mdio_addr, regnum & 0xffff); + + ret = enetc_mdio_wait_complete(regs); + if (ret) + return ret; + } + + /* write the value */ + enetc_wr_reg(®s->mdio_data, MDIO_DATA(value)); + + ret = enetc_mdio_wait_complete(regs); + if (ret) + return ret; + + return 0; +} + +static int enetc_mdio_read(struct mii_bus *bus, int phy_id, int regnum) +{ + struct enetc_mdio_regs __iomem *regs = bus_to_enetc_regs(bus); + u32 mdio_ctl, mdio_cfg; + u16 dev_addr, value; + int ret; + + mdio_cfg = MDIO_CFG_CLKDIV(ENETC_MDC_DIV) | MDIO_CFG_NEG; + if (regnum & MII_ADDR_C45) { + dev_addr = (regnum >> 16) & 0x1f; + mdio_cfg |= MDIO_CFG_ENC45; + } else { + dev_addr = regnum & 0x1f; + mdio_cfg &= ~MDIO_CFG_ENC45; + } + + enetc_wr_reg(®s->mdio_cfg, mdio_cfg); + + ret = enetc_mdio_wait_complete(regs); + if (ret) + return ret; + + /* set port and device addr */ + mdio_ctl = MDIO_CTL_PORT_ADDR(phy_id) | MDIO_CTL_DEV_ADDR(dev_addr); + enetc_wr_reg(®s->mdio_ctl, mdio_ctl); + + /* set the register address */ + if (regnum & MII_ADDR_C45) { + enetc_wr_reg(®s->mdio_addr, regnum & 0xffff); + + ret = enetc_mdio_wait_complete(regs); + if (ret) + return ret; + } + + /* initiate the read */ + enetc_wr_reg(®s->mdio_ctl, mdio_ctl | MDIO_CTL_READ); + + ret = enetc_mdio_wait_complete(regs); + if (ret) + return ret; + + /* return all Fs if nothing was there */ + if (enetc_rd_reg(®s->mdio_cfg) & MDIO_CFG_RD_ER) { + dev_dbg(&bus->dev, + "Error while reading PHY%d reg at %d.%hhu\n", + phy_id, dev_addr, regnum); + return 0xffff; + } + + value = enetc_rd_reg(®s->mdio_data) & 0xffff; + + return value; +} + +int enetc_mdio_probe(struct enetc_pf *pf) +{ + struct device *dev = &pf->si->pdev->dev; + struct enetc_mdio_regs __iomem *regs; + struct device_node *np; + struct mii_bus *bus; + int ret; + + bus = mdiobus_alloc_size(sizeof(regs)); + if (!bus) + return -ENOMEM; + + bus->name = "Freescale ENETC MDIO Bus"; + bus->read = enetc_mdio_read; + bus->write = enetc_mdio_write; + bus->parent = dev; + snprintf(bus->id, MII_BUS_ID_SIZE, "%s", dev_name(dev)); + + /* store the enetc mdio base address for this bus */ + regs = pf->si->hw.port + ENETC_MDIO_REG_OFFSET; + bus->priv = regs; + + np = of_get_child_by_name(dev->of_node, "mdio"); + if (!np) { + dev_err(dev, "MDIO node missing\n"); + ret = -EINVAL; + goto err_registration; + } + + ret = of_mdiobus_register(bus, np); + if (ret) { + of_node_put(np); + dev_err(dev, "cannot register MDIO bus\n"); + goto err_registration; + } + + of_node_put(np); + pf->mdio = bus; + + return 0; + +err_registration: + mdiobus_free(bus); + + return ret; +} + +void enetc_mdio_remove(struct enetc_pf *pf) +{ + if (pf->mdio) { + mdiobus_unregister(pf->mdio); + mdiobus_free(pf->mdio); + } +} diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c index 7d28f5e9b46b..15876a6e7598 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c @@ -746,6 +746,7 @@ static void enetc_pf_netdev_setup(struct enetc_si *si, struct net_device *ndev, static int enetc_of_get_phy(struct enetc_ndev_priv *priv) { + struct enetc_pf *pf = enetc_si_priv(priv->si); struct device_node *np = priv->dev->of_node; int err; @@ -770,12 +771,22 @@ static int enetc_of_get_phy(struct enetc_ndev_priv *priv) priv->phy_node = of_node_get(np); } + if (!of_phy_is_fixed_link(np)) { + err = enetc_mdio_probe(pf); + if (err) { + of_node_put(priv->phy_node); + return err; + } + } + priv->if_mode = of_get_phy_mode(np); if (priv->if_mode < 0) { dev_err(priv->dev, "missing phy type\n"); of_node_put(priv->phy_node); if (of_phy_is_fixed_link(np)) of_phy_deregister_fixed_link(np); + else + enetc_mdio_remove(pf); return -EINVAL; } @@ -898,6 +909,7 @@ static void enetc_pf_remove(struct pci_dev *pdev) unregister_netdev(si->ndev); + enetc_mdio_remove(pf); enetc_of_put_phy(priv); enetc_free_msix(priv); diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.h b/drivers/net/ethernet/freescale/enetc/enetc_pf.h index 2061ae5ccba0..10dd1b53bb08 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.h +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.h @@ -42,8 +42,14 @@ struct enetc_pf { char vlan_promisc_simap; /* bitmap of SIs in VLAN promisc mode */ DECLARE_BITMAP(vlan_ht_filter, ENETC_VLAN_HT_SIZE); DECLARE_BITMAP(active_vlans, VLAN_N_VID); + + struct mii_bus *mdio; /* saved for cleanup */ }; int enetc_msg_psi_init(struct enetc_pf *pf); void enetc_msg_psi_free(struct enetc_pf *pf); void enetc_msg_handle_rxmsg(struct enetc_pf *pf, int mbox_id, u16 *status); + +/* MDIO */ +int enetc_mdio_probe(struct enetc_pf *pf); +void enetc_mdio_remove(struct enetc_pf *pf); |