diff options
| -rw-r--r-- | drivers/iio/industrialio-backend.c | 86 | ||||
| -rw-r--r-- | include/linux/iio/backend.h | 36 |
2 files changed, 122 insertions, 0 deletions
diff --git a/drivers/iio/industrialio-backend.c b/drivers/iio/industrialio-backend.c index c27243e88462..929aff4040ed 100644 --- a/drivers/iio/industrialio-backend.c +++ b/drivers/iio/industrialio-backend.c @@ -226,6 +226,92 @@ int iio_backend_set_sampling_freq(struct iio_backend *back, unsigned int chan, } EXPORT_SYMBOL_NS_GPL(iio_backend_set_sampling_freq, IIO_BACKEND); +/** + * iio_backend_test_pattern_set - Configure a test pattern + * @back: Backend device + * @chan: Channel number + * @pattern: Test pattern + * + * Configure a test pattern on the backend. This is typically used for + * calibrating the timings on the data digital interface. + * + * RETURNS: + * 0 on success, negative error number on failure. + */ +int iio_backend_test_pattern_set(struct iio_backend *back, + unsigned int chan, + enum iio_backend_test_pattern pattern) +{ + if (pattern >= IIO_BACKEND_TEST_PATTERN_MAX) + return -EINVAL; + + return iio_backend_op_call(back, test_pattern_set, chan, pattern); +} +EXPORT_SYMBOL_NS_GPL(iio_backend_test_pattern_set, IIO_BACKEND); + +/** + * iio_backend_chan_status - Get the channel status + * @back: Backend device + * @chan: Channel number + * @error: Error indication + * + * Get the current state of the backend channel. Typically used to check if + * there were any errors sending/receiving data. + * + * RETURNS: + * 0 on success, negative error number on failure. + */ +int iio_backend_chan_status(struct iio_backend *back, unsigned int chan, + bool *error) +{ + return iio_backend_op_call(back, chan_status, chan, error); +} +EXPORT_SYMBOL_NS_GPL(iio_backend_chan_status, IIO_BACKEND); + +/** + * iio_backend_iodelay_set - Set digital I/O delay + * @back: Backend device + * @lane: Lane number + * @taps: Number of taps + * + * Controls delays on sending/receiving data. One usecase for this is to + * calibrate the data digital interface so we get the best results when + * transferring data. Note that @taps has no unit since the actual delay per tap + * is very backend specific. Hence, frontend devices typically should go through + * an array of @taps (the size of that array should typically match the size of + * calibration points on the frontend device) and call this API. + * + * RETURNS: + * 0 on success, negative error number on failure. + */ +int iio_backend_iodelay_set(struct iio_backend *back, unsigned int lane, + unsigned int taps) +{ + return iio_backend_op_call(back, iodelay_set, lane, taps); +} +EXPORT_SYMBOL_NS_GPL(iio_backend_iodelay_set, IIO_BACKEND); + +/** + * iio_backend_data_sample_trigger - Control when to sample data + * @back: Backend device + * @trigger: Data trigger + * + * Mostly useful for input backends. Configures the backend for when to sample + * data (eg: rising vs falling edge). + * + * RETURNS: + * 0 on success, negative error number on failure. + */ +int iio_backend_data_sample_trigger(struct iio_backend *back, + enum iio_backend_sample_trigger trigger) +{ + if (trigger >= IIO_BACKEND_SAMPLE_TRIGGER_MAX) + return -EINVAL; + + return iio_backend_op_call(back, data_sample_trigger, trigger); +} +EXPORT_SYMBOL_NS_GPL(iio_backend_data_sample_trigger, IIO_BACKEND); + static void iio_backend_free_buffer(void *arg) { struct iio_backend_buffer_pair *pair = arg; diff --git a/include/linux/iio/backend.h b/include/linux/iio/backend.h index e3e62f65db14..8099759d7242 100644 --- a/include/linux/iio/backend.h +++ b/include/linux/iio/backend.h @@ -49,6 +49,20 @@ struct iio_backend_data_fmt { bool enable; }; +/* vendor specific from 32 */ +enum iio_backend_test_pattern { + IIO_BACKEND_NO_TEST_PATTERN, + /* modified prbs9 */ + IIO_BACKEND_ADI_PRBS_9A = 32, + IIO_BACKEND_TEST_PATTERN_MAX +}; + +enum iio_backend_sample_trigger { + IIO_BACKEND_SAMPLE_TRIGGER_EDGE_FALLING, + IIO_BACKEND_SAMPLE_TRIGGER_EDGE_RISING, + IIO_BACKEND_SAMPLE_TRIGGER_MAX +}; + /** * struct iio_backend_ops - operations structure for an iio_backend * @enable: Enable backend. @@ -58,6 +72,10 @@ struct iio_backend_data_fmt { * @data_format_set: Configure the data format for a specific channel. * @data_source_set: Configure the data source for a specific channel. * @set_sample_rate: Configure the sampling rate for a specific channel. + * @test_pattern_set: Configure a test pattern. + * @chan_status: Get the channel status. + * @iodelay_set: Set digital I/O delay. + * @data_sample_trigger: Control when to sample data. * @request_buffer: Request an IIO buffer. * @free_buffer: Free an IIO buffer. * @extend_chan_spec: Extend an IIO channel. @@ -75,6 +93,15 @@ struct iio_backend_ops { enum iio_backend_data_source data); int (*set_sample_rate)(struct iio_backend *back, unsigned int chan, u64 sample_rate_hz); + int (*test_pattern_set)(struct iio_backend *back, + unsigned int chan, + enum iio_backend_test_pattern pattern); + int (*chan_status)(struct iio_backend *back, unsigned int chan, + bool *error); + int (*iodelay_set)(struct iio_backend *back, unsigned int chan, + unsigned int taps); + int (*data_sample_trigger)(struct iio_backend *back, + enum iio_backend_sample_trigger trigger); struct iio_buffer *(*request_buffer)(struct iio_backend *back, struct iio_dev *indio_dev); void (*free_buffer)(struct iio_backend *back, @@ -97,6 +124,15 @@ int iio_backend_data_source_set(struct iio_backend *back, unsigned int chan, enum iio_backend_data_source data); int iio_backend_set_sampling_freq(struct iio_backend *back, unsigned int chan, u64 sample_rate_hz); +int iio_backend_test_pattern_set(struct iio_backend *back, + unsigned int chan, + enum iio_backend_test_pattern pattern); +int iio_backend_chan_status(struct iio_backend *back, unsigned int chan, + bool *error); +int iio_backend_iodelay_set(struct iio_backend *back, unsigned int lane, + unsigned int taps); +int iio_backend_data_sample_trigger(struct iio_backend *back, + enum iio_backend_sample_trigger trigger); int devm_iio_backend_request_buffer(struct device *dev, struct iio_backend *back, struct iio_dev *indio_dev); |