diff options
Diffstat (limited to 'drivers/net/phy')
| -rw-r--r-- | drivers/net/phy/bcm-cygnus.c | 6 | ||||
| -rw-r--r-- | drivers/net/phy/bcm-phy-lib.c | 2 | ||||
| -rw-r--r-- | drivers/net/phy/bcm-phy-lib.h | 7 | ||||
| -rw-r--r-- | drivers/net/phy/bcm7xxx.c | 4 | ||||
| -rw-r--r-- | drivers/net/phy/micrel.c | 31 |
5 files changed, 44 insertions, 6 deletions
diff --git a/drivers/net/phy/bcm-cygnus.c b/drivers/net/phy/bcm-cygnus.c index 6838129839ca..e757b09f1889 100644 --- a/drivers/net/phy/bcm-cygnus.c +++ b/drivers/net/phy/bcm-cygnus.c @@ -61,17 +61,17 @@ static int bcm_cygnus_afe_config(struct phy_device *phydev) return rc; /* make rcal=100, since rdb default is 000 */ - rc = bcm_phy_write_exp(phydev, MII_BRCM_CORE_EXPB1, 0x10); + rc = bcm_phy_write_exp_sel(phydev, MII_BRCM_CORE_EXPB1, 0x10); if (rc < 0) return rc; /* CORE_EXPB0, Reset R_CAL/RC_CAL Engine */ - rc = bcm_phy_write_exp(phydev, MII_BRCM_CORE_EXPB0, 0x10); + rc = bcm_phy_write_exp_sel(phydev, MII_BRCM_CORE_EXPB0, 0x10); if (rc < 0) return rc; /* CORE_EXPB0, Disable Reset R_CAL/RC_CAL Engine */ - rc = bcm_phy_write_exp(phydev, MII_BRCM_CORE_EXPB0, 0x00); + rc = bcm_phy_write_exp_sel(phydev, MII_BRCM_CORE_EXPB0, 0x00); return 0; } diff --git a/drivers/net/phy/bcm-phy-lib.c b/drivers/net/phy/bcm-phy-lib.c index 5ad130c3da43..d5e0833d69b9 100644 --- a/drivers/net/phy/bcm-phy-lib.c +++ b/drivers/net/phy/bcm-phy-lib.c @@ -56,7 +56,7 @@ int bcm54xx_auxctl_read(struct phy_device *phydev, u16 regnum) /* The register must be written to both the Shadow Register Select and * the Shadow Read Register Selector */ - phy_write(phydev, MII_BCM54XX_AUX_CTL, regnum | + phy_write(phydev, MII_BCM54XX_AUX_CTL, MII_BCM54XX_AUXCTL_SHDWSEL_MASK | regnum << MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT); return phy_read(phydev, MII_BCM54XX_AUX_CTL); } diff --git a/drivers/net/phy/bcm-phy-lib.h b/drivers/net/phy/bcm-phy-lib.h index 7c73808cbbde..81cceaa412fe 100644 --- a/drivers/net/phy/bcm-phy-lib.h +++ b/drivers/net/phy/bcm-phy-lib.h @@ -14,11 +14,18 @@ #ifndef _LINUX_BCM_PHY_LIB_H #define _LINUX_BCM_PHY_LIB_H +#include <linux/brcmphy.h> #include <linux/phy.h> int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val); int bcm_phy_read_exp(struct phy_device *phydev, u16 reg); +static inline int bcm_phy_write_exp_sel(struct phy_device *phydev, + u16 reg, u16 val) +{ + return bcm_phy_write_exp(phydev, reg | MII_BCM54XX_EXP_SEL_ER, val); +} + int bcm54xx_auxctl_write(struct phy_device *phydev, u16 regnum, u16 val); int bcm54xx_auxctl_read(struct phy_device *phydev, u16 regnum); diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c index 29b1c88b55cc..01d2ff2f6241 100644 --- a/drivers/net/phy/bcm7xxx.c +++ b/drivers/net/phy/bcm7xxx.c @@ -65,10 +65,10 @@ struct bcm7xxx_phy_priv { static void r_rc_cal_reset(struct phy_device *phydev) { /* Reset R_CAL/RC_CAL Engine */ - bcm_phy_write_exp(phydev, 0x00b0, 0x0010); + bcm_phy_write_exp_sel(phydev, 0x00b0, 0x0010); /* Disable Reset R_AL/RC_CAL Engine */ - bcm_phy_write_exp(phydev, 0x00b0, 0x0000); + bcm_phy_write_exp_sel(phydev, 0x00b0, 0x0000); } static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev) diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index f41b224a9cdb..ab195f0916d6 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -573,9 +573,40 @@ static int ksz9031_config_init(struct phy_device *phydev) ksz9031_of_load_skew_values(phydev, of_node, MII_KSZ9031RN_TX_DATA_PAD_SKEW, 4, tx_data_skews, 4); + + /* Silicon Errata Sheet (DS80000691D or DS80000692D): + * When the device links in the 1000BASE-T slave mode only, + * the optional 125MHz reference output clock (CLK125_NDO) + * has wide duty cycle variation. + * + * The optional CLK125_NDO clock does not meet the RGMII + * 45/55 percent (min/max) duty cycle requirement and therefore + * cannot be used directly by the MAC side for clocking + * applications that have setup/hold time requirements on + * rising and falling clock edges. + * + * Workaround: + * Force the phy to be the master to receive a stable clock + * which meets the duty cycle requirement. + */ + if (of_property_read_bool(of_node, "micrel,force-master")) { + result = phy_read(phydev, MII_CTRL1000); + if (result < 0) + goto err_force_master; + + /* enable master mode, config & prefer master */ + result |= CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER; + result = phy_write(phydev, MII_CTRL1000, result); + if (result < 0) + goto err_force_master; + } } return ksz9031_center_flp_timing(phydev); + +err_force_master: + phydev_err(phydev, "failed to force the phy to master mode\n"); + return result; } #define KSZ8873MLL_GLOBAL_CONTROL_4 0x06 |