diff options
Diffstat (limited to 'sound/usb/format.c')
| -rw-r--r-- | sound/usb/format.c | 73 |
1 files changed, 60 insertions, 13 deletions
diff --git a/sound/usb/format.c b/sound/usb/format.c index 9260136e4c9b..50e1874c847c 100644 --- a/sound/usb/format.c +++ b/sound/usb/format.c @@ -151,6 +151,19 @@ static u64 parse_audio_format_i_type(struct snd_usb_audio *chip, return pcm_formats; } +static int set_fixed_rate(struct audioformat *fp, int rate, int rate_bits) +{ + kfree(fp->rate_table); + fp->rate_table = kmalloc(sizeof(int), GFP_KERNEL); + if (!fp->rate_table) + return -ENOMEM; + fp->nr_rates = 1; + fp->rate_min = rate; + fp->rate_max = rate; + fp->rates = rate_bits; + fp->rate_table[0] = rate; + return 0; +} /* * parse the format descriptor and stores the possible sample rates @@ -223,9 +236,47 @@ static int parse_audio_format_rates_v1(struct snd_usb_audio *chip, struct audiof fp->rate_min = combine_triple(&fmt[offset + 1]); fp->rate_max = combine_triple(&fmt[offset + 4]); } + + /* Jabra Evolve 65 headset */ + if (chip->usb_id == USB_ID(0x0b0e, 0x030b)) { + /* only 48kHz for playback while keeping 16kHz for capture */ + if (fp->nr_rates != 1) + return set_fixed_rate(fp, 48000, SNDRV_PCM_RATE_48000); + } + return 0; } + +/* + * Presonus Studio 1810c supports a limited set of sampling + * rates per altsetting but reports the full set each time. + * If we don't filter out the unsupported rates and attempt + * to configure the card, it will hang refusing to do any + * further audio I/O until a hard reset is performed. + * + * The list of supported rates per altsetting (set of available + * I/O channels) is described in the owner's manual, section 2.2. + */ +static bool s1810c_valid_sample_rate(struct audioformat *fp, + unsigned int rate) +{ + switch (fp->altsetting) { + case 1: + /* All ADAT ports available */ + return rate <= 48000; + case 2: + /* Half of ADAT ports available */ + return (rate == 88200 || rate == 96000); + case 3: + /* Analog I/O only (no S/PDIF nor ADAT) */ + return rate >= 176400; + default: + return false; + } + return false; +} + /* * Helper function to walk the array of sample rate triplets reported by * the device. The problem is that we need to parse whole array first to @@ -262,6 +313,12 @@ static int parse_uac2_sample_rate_range(struct snd_usb_audio *chip, } for (rate = min; rate <= max; rate += res) { + + /* Filter out invalid rates on Presonus Studio 1810c */ + if (chip->usb_id == USB_ID(0x0194f, 0x010c) && + !s1810c_valid_sample_rate(fp, rate)) + goto skip_rate; + if (fp->rate_table) fp->rate_table[nr_rates] = rate; if (!fp->rate_min || rate < fp->rate_min) @@ -276,6 +333,7 @@ static int parse_uac2_sample_rate_range(struct snd_usb_audio *chip, break; } +skip_rate: /* avoid endless loop */ if (res == 0) break; @@ -299,17 +357,7 @@ static int line6_parse_audio_format_rates_quirk(struct snd_usb_audio *chip, case USB_ID(0x0e41, 0x4248): /* Line6 Helix >= fw 2.82 */ case USB_ID(0x0e41, 0x4249): /* Line6 Helix Rack >= fw 2.82 */ case USB_ID(0x0e41, 0x424a): /* Line6 Helix LT >= fw 2.82 */ - /* supported rates: 48Khz */ - kfree(fp->rate_table); - fp->rate_table = kmalloc(sizeof(int), GFP_KERNEL); - if (!fp->rate_table) - return -ENOMEM; - fp->nr_rates = 1; - fp->rate_min = 48000; - fp->rate_max = 48000; - fp->rates = SNDRV_PCM_RATE_48000; - fp->rate_table[0] = 48000; - return 0; + return set_fixed_rate(fp, 48000, SNDRV_PCM_RATE_48000); } return -ENODEV; @@ -325,8 +373,7 @@ static int parse_audio_format_rates_v2v3(struct snd_usb_audio *chip, struct usb_device *dev = chip->dev; unsigned char tmp[2], *data; int nr_triplets, data_size, ret = 0, ret_l6; - int clock = snd_usb_clock_find_source(chip, fp->protocol, - fp->clock, false); + int clock = snd_usb_clock_find_source(chip, fp, false); if (clock < 0) { dev_err(&dev->dev, |