summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-09-21drm/vc4: hvs: Pull the state of all the CRTCs prior to PV muxingMaxime Ripard
The vc4 display engine has a first controller called the HVS that will perform the composition of the planes. That HVS has 3 FIFOs and can therefore compose planes for up to three outputs. The timings part is generated through a component called the Pixel Valve, and the BCM2711 has 6 of them. Thus, the HVS has some bits to control which FIFO gets output to which Pixel Valve. The current code supports that muxing by looking at all the CRTCs in a new DRM atomic state in atomic_check, and given the set of constraints that we have, assigns FIFOs to CRTCs or reject the mode entirely. The actual muxing will occur during atomic_commit. However, that doesn't work if only a fraction of the CRTCs' state is updated in that state, since it will ignore the CRTCs that are kept running unmodified, and will thus unassign its associated FIFO, and later disable it. In order to make the code work as expected, let's pull the CRTC state of all the enabled CRTC in our atomic_check so that we can operate on all the running CRTCs, no matter whether they are affected by the new state or not. Fixes: 87ebcd42fb7b ("drm/vc4: crtc: Assign output to channel automatically") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200917121623.42023-1-maxime@cerno.tech
2020-09-21drm/ttm: update kernel-doc line commentsTian Tao
Update kernel-doc line comments to fix warnings reported by make W=1. drivers/gpu/drm/ttm/ttm_memory.c:271: warning: Function parameter or member 'glob' not described in 'ttm_shrink' drivers/gpu/drm/ttm/ttm_memory.c:271: warning: Function parameter or member 'from_wq' not described in 'ttm_shrink' drivers/gpu/drm/ttm/ttm_memory.c:271: warning: Function parameter or member 'extra' not described in 'ttm_shrink' drivers/gpu/drm/ttm/ttm_memory.c:271: warning: Function parameter or member 'ctx' not described in 'ttm_shrink' Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Link: https://patchwork.freedesktop.org/patch/391317/ Signed-off-by: Christian König <christian.koenig@amd.com>
2020-09-21drm/panfrost: add Amlogic GPU integration quirksNeil Armstrong
This adds the required GPU quirks, including the quirk in the PWR registers at the GPU reset time and the IOMMU quirk for shareability issues observed on G52 in Amlogic G12B SoCs. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200916150147.25753-4-narmstrong@baylibre.com
2020-09-21drm/panfrost: add amlogic reset quirk callbackNeil Armstrong
The T820, G31 & G52 GPUs integrated by Amlogic in the respective GXM, G12A/SM1 & G12B SoCs needs a quirk in the PWR registers at the GPU reset time. Since the Amlogic's integration of the GPU cores with the SoC is not publicly documented we do not know what does these values, but they permit having a fully functional GPU running with Panfrost. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [Steven: Fix typo in commit log] Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200916150147.25753-3-narmstrong@baylibre.com
2020-09-21drm/panfrost: add support for vendor quirkNeil Armstrong
The T820, G31 & G52 GPUs integrated by Amlogic in the respective GXM, G12A/SM1 & G12B SoCs needs a quirk in the PWR registers after each reset. This adds a callback in the device compatible struct of permit this. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [Steven: Fix typo in commit log] Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200916150147.25753-2-narmstrong@baylibre.com
2020-09-21drm/dev: Remove drm_dev_initDaniel Vetter
We can now also delete drm_dev_init, now that vkms, vgem and i915 selftests are resolved. Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200918132505.2316382-5-daniel.vetter@ffwll.ch
2020-09-21drm/amdgpu: Convert to using devm_drm_dev_alloc() (v2)Luben Tuikov
Convert to using devm_drm_dev_alloc(), as drm_dev_init() is going away. v2: Remove drm_dev_put() since a) devres doesn't do refcounting, see Documentation/driver-api/driver-model/devres.rst, Section 4, paragraph 1; and since b) devres acts as garbage collector when the DRM device's parent's devres "action" callback is called to free the container device (amdgpu_device), which embeds the DRM dev. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200918132505.2316382-4-daniel.vetter@ffwll.ch
2020-09-21drm/i915/selftests: align more to real device lifetimesDaniel Vetter
To avoid having to create all the device and driver scaffolding we just manually create and destroy a devres_group. v2: Rebased v3: use devres_open/release_group so we can use devm without real hacks in the driver core or having to create an entire fake bus for testing drivers. Might want to extract this into helpers eventually, maybe as a mock_drm_dev_alloc or test_drm_dev_alloc. v4: - Fix IS_ERR handling (Matt) - Delete surplus put_device() in mock_device_release (intel-gfx-ci) v5: - do not switch to device_add - it breaks runtime pm in the tests and with the devres_group_add/release no longer needed for automatic cleanup (CI). Update commit message to match. - print correct error in pr_err (Matt) v6: Remove now unused err variable (CI). v7: More warning fixes ... Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (v3) Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> (v4) Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200919134032.2488403-1-daniel.vetter@ffwll.ch
2020-09-21drm/i915/selftest: Create mock_destroy_deviceDaniel Vetter
Just some prep work before we rework the lifetime handling, which requires replacing all the drm_dev_put in selftests by something else. v2: Don't go with a static inline, upsets the header tests and separation. Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200918132505.2316382-2-daniel.vetter@ffwll.ch
2020-09-18fbcon: Remove the superfluous breakJing Xiangfeng
Remove the superfluous break, as there is a 'return' before it. Fixes: bad07ff74c32 ("fbcon: smart blitter usage for scrolling") Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200918010521.69950-1-jingxiangfeng@huawei.com
2020-09-18fbdev: aty: remove CONFIG_PM containerVaibhav Gupta
The changes made in below mentioned commit removed CONFIG_PM containers from drivers/video/fbdev/aty/atyfb_base.c but not from drivers/video/fbdev/aty/atyfb.h for respective callbacks. This resulted in error for implicit declaration for those callbacks. Fixes: 348b2956d5e6 ("fbdev: aty: use generic power management") Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200917115313.725622-1-vaibhavgupta40@gmail.com
2020-09-18drm/ttm: drop evicted from ttm_bo.Dave Airlie
This was unused. Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200917064132.148521-3-airlied@gmail.com
2020-09-18drm/ttm: drop special pipeline accel cleanup function.Dave Airlie
The two accel cleanup paths were mostly the same once refactored. Just pass a bool to say if the evictions are to be pipelined. Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200917064132.148521-2-airlied@gmail.com
2020-09-18drm/ttm: make common function for wait/free node path.Dave Airlie
The pipeline and accel cleansups has similiar paths here. Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200917043040.146575-8-airlied@gmail.com
2020-09-18drm/ttm: move ghost object creation to a common functionDave Airlie
Both accel cleanup and pipeline move had the same code, make a single function for it. Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200917043040.146575-7-airlied@gmail.com
2020-09-18drm/ttm: add a simple assign mem to bo wrapperDave Airlie
This pattern is called in a few places, just clean it up. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200917043040.146575-6-airlied@gmail.com
2020-09-18drm/ttm/drivers: call the bind function directly.Dave Airlie
Now the bind functions have all the protection explicitly the drivers can just call them directly, and the api can be unexported Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200917043040.146575-5-airlied@gmail.com
2020-09-18drm/ttm: move unbind into the tt destroy.Dave Airlie
This moves unbind into the driver side on destroy paths. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200917043040.146575-4-airlied@gmail.com
2020-09-18drm/ttm: flip tt destroy ordering.Dave Airlie
Call the driver first and have it call the common code cleanup. This is useful later to fix unbind. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200917043040.146575-3-airlied@gmail.com
2020-09-18drm/ttm: protect against reentrant bind in the driversDave Airlie
This moves the generic tracking into the drivers and protects against reentrancy in the drivers. It fixes up radeon and agp to be able to query the bound status as that is required. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200917043040.146575-2-airlied@gmail.com
2020-09-17drm/ttm: remove superflous extern attribute from funcsChristian König
Extern is the default attribute for functions anyway. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/390972/
2020-09-17dma-resv: lockdep-prime address_space->i_mmap_rwsem for dma-resvDaniel Vetter
GPU drivers need this in their shrinkers, to be able to throw out mmap'ed buffers. Note that we also need dma_resv_lock in shrinkers, but that loop is resolved by trylocking in shrinkers. So full hierarchy is now (ignore some of the other branches we already have primed): mmap_read_lock -> dma_resv -> shrinkers -> i_mmap_lock_write I hope that's not inconsistent with anything mm or fs does, adding relevant people. Reviewed-by: Thomas Hellström <thomas.hellstrom@intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Cc: Dave Chinner <david@fromorbit.com> Cc: Qian Cai <cai@lca.pw> Cc: linux-xfs@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Cc: Thomas Hellström (Intel) <thomas_os@shipmail.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: linux-mm@kvack.org Cc: linux-rdma@vger.kernel.org Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200728135839.1035515-1-daniel.vetter@ffwll.ch
2020-09-17drm: fix spelling error in commentsWang Qing
Change the comment typo: "manger" -> "manager". Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1600308275-32094-1-git-send-email-wangqing@vivo.com
2020-09-17MAINTAINERS: make linux-aspeed list remarks consistentLukas Bulwahn
Commit f15a3ea80391 ("MAINTAINERS: Add ASPEED BMC GFX DRM driver entry") does not mention that linux-aspeed@lists.ozlabs.org is moderated for non-subscribers, but the other three entries for linux-aspeed@lists.ozlabs.org do. By 'majority vote' among entries, let us assume it was just missed here and adjust it to be consistent with others. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200912183334.22683-1-lukas.bulwahn@gmail.com
2020-09-17drm/ttm: some cleanupsChristian König
Unexport ttm_check_under_lowerlimit. Make ttm_bo_acc_size static and unexport it. Remove ttm_get_kernel_zone_memory_size. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/390515/
2020-09-16Merge branch 'virtio-shm' of ↵Maxime Ripard
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse into drm-misc-next Topic pull request for core virtio changes that will be required by the DRM driver. Signed-off-by: Maxime Ripard <maxime@cerno.tech> From: Gurchetan Singh <gurchetansingh@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/CAAfnVBn2BzXWFY3hhjDxd5q0P2_JWn-HdkVxgS94x9keAUZiow@mail.gmail.com
2020-09-16drm/ast: Enable CRTC before planesThomas Zimmermann
An active cursor plane requires a valid display mode. Change the commit_tail callback, so that it sets up the CRTC's mode before updating planes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200914072236.19398-5-tzimmermann@suse.de
2020-09-16drm/ast: Program display mode in CRTC's atomic_enable()Thomas Zimmermann
This change simplifies ast's modesetting code. The display mode is now programmed from within the CRTC's atomic_enable(), which only runs if we actually want to program the mode. Corresponding code in atomic_flush() is being removed. Also removed is atomic_begin(), which serves no purpose at all. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200914072236.19398-4-tzimmermann@suse.de
2020-09-16drm/ast: Disable planes while switching display modesThomas Zimmermann
The ast HW cursor requires the primary plane and CRTC to display at a valid mode and format. This is not the case while switching display modes, which can lead to the screen turing permanently dark. As a workaround, the ast driver now disables active planes while the mode or format switch takes place. It also synchronizes with the vertical refresh to give CRTC and planes some time to catch up on each other. The active planes planes (primary or cursor) will be re-enabled by each plane's atomic_update() function. v3: * move the logic into the CRTC's atomic_disable function v2: * move the logic into the commit-tail function Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200914072236.19398-3-tzimmermann@suse.de
2020-09-16drm/ast: Set format registers in primary plane's updateThomas Zimmermann
The atomic modesetting code tried to distinguish format changes from full modesetting operations. But the implementation was buggy and the format registers were often updated even for simple pageflips. Fix this problem by handling format changes in the primary plane's update function. v3: * program format in primary plane's update function Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200914072236.19398-2-tzimmermann@suse.de
2020-09-16MAINTAINERS: Add Thomas as reviewer for ast, mgag200 and udlThomas Zimmermann
I'm adding myself as reviewer for ast, mgag200 and udl. I've already been keeping these drivers in shape for a while. While at it I'm also setting the list and tree for ast and mgag200, and update each driver's status to Supported. Working on these drivers is part of my job. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200915071708.4743-1-tzimmermann@suse.de
2020-09-16drm: mxsfb: check framebuffer pitchStefan Agner
The lcdif IP does not support a framebuffer pitch (stride) other than framebuffer width. Check for equality and reject the framebuffer otherwise. This prevents a distorted picture when using 640x800 and running the Mesa graphics stack. Mesa tries to use a cache aligned stride, which leads at that particular resolution to width != stride. Currently Mesa has no fallback behavior, but rejecting this configuration allows userspace to handle the issue correctly. Fixes: 45d59d704080 ("drm: Add new driver for MXSFB controller") Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200908141654.266836-1-stefan@agner.ch
2020-09-16drm/vc4: Handing the return value of drm_universal_plane_initTian Tao
Handing the return value of drm_universal_plane_init to fix the following W=1 kernel build warning(s): vc4_plane.c: In function ‘vc4_plane_init’: vc4_plane.c:1340:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1599811777-34093-1-git-send-email-tiantao6@hisilicon.com
2020-09-16drm/ttm: move populated state into page flagsDave Airlie
Just use the top bit of page flags to store the populated state. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200915024007.67163-8-airlied@gmail.com
2020-09-16drm/ttm: split bound/populated flags.Dave Airlie
Move bound up into the bo object, and keep populated with the tt object. The ghost object handling needs to follow the flags at the bo level now instead of it being part of the ttm tt object. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200915024007.67163-7-airlied@gmail.com
2020-09-16drm/ttm: move ttm binding/unbinding out of ttm_tt paths.Dave Airlie
Move these up to the bo level, moving ttm_tt to just being backing store. Next step is to move the bound flag out. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200915024007.67163-6-airlied@gmail.com
2020-09-16drm/ttm: split populate out from binding.Dave Airlie
Drivers have to call populate themselves now before binding. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200915024007.67163-5-airlied@gmail.com
2020-09-16drm/ttm: tt destroy move null check to outer function.Dave Airlie
This just makes things easier later. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200915024007.67163-4-airlied@gmail.com
2020-09-16drm/ttm: wrap tt destroy. (v2)Dave Airlie
All places this was called was using bo->ttm either direct or indirectly. v2: move to ttm_bo Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200915024007.67163-3-airlied@gmail.com
2020-09-16drm/ttm/tt: add wrappers to set tt state.Dave Airlie
This adds 2 getters and 4 setters, however unbound and populated are currently the same thing, this will change, it also drops a BUG_ON that seems not that useful. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200915024007.67163-2-airlied@gmail.com
2020-09-15drm/ttm: remove available_cachingChristian König
Instead of letting TTM make an educated guess based on some mask all drivers should just specify what caching they want for their CPU mappings. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/390207/
2020-09-15drm/nouveau: explicitly specify caching to useChristian König
Instead of letting TTM masking the caching bits specify directly what the driver needs. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/390206
2020-09-15drm/ttm: remove default cachingChristian König
As far as I can tell this was never used either and we just always fallback to the order cached > wc > uncached anyway. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/390142/
2020-09-15drm/bridge: ps8640: Rework power state handlingEnric Balletbo i Serra
The get_edid() callback can be triggered anytime by an ioctl, i.e drm_mode_getconnector (ioctl) -> drm_helper_probe_single_connector_modes -> drm_bridge_connector_get_modes -> ps8640_bridge_get_edid Actually if the bridge pre_enable() function was not called before get_edid(), the driver will not be able to get the EDID properly and display will not work until a second get_edid() call is issued and if pre_enable() is called before. The side effect of this, for example, is that you see anything when `Frecon` starts, neither the splash screen, until the graphical session manager starts. To fix this we need to make sure that all we need is enabled before reading the EDID. This means the following: 1. If get_edid() is called before having the device powered we need to power on the device. In such case, the driver will power off again the device. 2. If get_edid() is called after having the device powered, all should just work. We added a powered flag in order to avoid recurrent calls to ps8640_bridge_poweron() and unneeded delays. 3. This seems to be specific for this device, but we need to make sure the panel is powered on before do a power on cycle on this device. Otherwise the device fails to retrieve the EDID. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Bilal Wasim <bwasim.lkml@gmail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200827085911.944899-2-enric.balletbo@collabora.com
2020-09-15drm/virtio: add virtio_gpu_cmd_unref_resource error handlingGerd Hoffmann
Usually we wait for the host to complete the unref request, then cleanup the guest-side state of the object in the completion callback. When submitting the unref command failed the completion callback will not be called though, so cleanup right away. Fixes a WARN on stale mm entries on driver shutdown. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20200908070723.6394-4-kraxel@redhat.com
2020-09-15drm/virtio: return virtio_gpu_queue errorsGerd Hoffmann
In case queuing virtio commands fails (can happen when the device got unplugged) pass up the error. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20200908070723.6394-3-kraxel@redhat.com
2020-09-15drm/virtio: use drmm_mode_config_initGerd Hoffmann
Use managed init call to simplify cleanup. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20200908070723.6394-2-kraxel@redhat.com
2020-09-15gpu/drm: ingenic: Add option to mmap GEM buffers cachedPaul Cercueil
Ingenic SoCs are most notably used in cheap chinese handheld gaming consoles. There, the games and applications generally render in software directly into GEM buffers. Traditionally, GEM buffers are mapped write-combine. Writes to the buffer are accelerated, and reads are slow. Application doing lots of alpha-blending paint inside shadow buffers, which is then memcpy'd into the final GEM buffer. On recent Ingenic SoCs however, it is much faster to have a fully cached GEM buffer, in which applications paint directly, and whose data is invalidated before scanout, than having a write-combine GEM buffer, even when alpha blending is not used. Add an optional 'cached_gem_buffers' parameter to the ingenic-drm driver to allow GEM buffers to be mapped fully-cached, in order to speed up software rendering. v2: Use standard noncoherent DMA APIs v3: Use damage clips instead of invalidating full frames v4: Avoid dma_pgprot() which is not exported. Using vm_get_page_prot() is enough in this case. v5: - Avoid calling drm_gem_cma_prime_mmap(). It has the side effect that an extra object reference is obtained, which causes our dumb buffers to never be freed. It should have been drm_gem_cma_mmap_obj(). However, our custom mmap function only differs with one flag, so we can cleanly handle both modes in ingenic_drm_gem_mmap(). - Call drm_gem_vm_close() if drm_mmap_attrs() failed, just like in drm_gem_cma_mmap_obj(). Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200912195639.176001-1-paul@crapouillou.net
2020-09-14drm/i915: Drop the drm_atomic_helper_calc_timestamping_constants() callVille Syrjälä
We update the timestamping constants per-crtc explicitly in intel_crtc_update_active_timings(). Furtermore the helper will use uapi.adjusted_mode whereas we want hw.adjusted_mode. Thus let's drop the helper call an rely on what we already have in intel_crtc_update_active_timings(). We can now also drop the hw.adjusted_mode -> uapi.adjusted_mode copy hack that was added to keep the helper from deriving the timestamping constants from the wrong thing. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200907120026.6360-3-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2020-09-14drm/atomic-helper: Remove the timestamping constant update from ↵Ville Syrjälä
drm_atomic_helper_update_legacy_modeset_state() The timestamping constants have nothing to do with any legacy state so should not be updated from drm_atomic_helper_update_legacy_modeset_state(). Let's make everyone call drm_atomic_helper_calc_timestamping_constants() directly instead of relying on drm_atomic_helper_update_legacy_modeset_state() to call it. @@ expression S; @@ - drm_atomic_helper_calc_timestamping_constants(S); @@ expression D, S; @@ drm_atomic_helper_update_legacy_modeset_state(D, S); + drm_atomic_helper_calc_timestamping_constants(S); v2: Update drm_crtc_vblank_helper_get_vblank_timestamp{,_internal}() docs (Daniel) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200907120026.6360-2-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>