| Age | Commit message (Collapse) | Author |
|---|
|
PAPR specifies that RTAS may be called with MSR[RI] enabled if the
calling context is recoverable, and RTAS will manage RI as necessary.
Call the rtas entry point with RI enabled, and add a check to ensure
the caller has RI enabled.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220308135047.478297-10-npiggin@gmail.com
|
|
On 64-bit, PACA is saved in a SPRG so it does not need to be saved on
stack. We also don't need to mask off the top bits for real mode
addresses because the architecture does this for us.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220308135047.478297-8-npiggin@gmail.com
|
|
Disable MSR[EE] in C code rather than asm.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220308135047.478297-5-npiggin@gmail.com
|
|
The code was moved verbatim including whitespace cruft. Fix that.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220308135047.478297-4-npiggin@gmail.com
|
|
This symbol is marked nokprobe on 32-bit but not 64-bit, add it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220308135047.478297-3-npiggin@gmail.com
|
|
This makes working on the code a bit easier.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220308135047.478297-2-npiggin@gmail.com
|
|
Implement the AT_MINSIGSTKSZ AUXV entry, allowing userspace to
dynamically size stack allocations in a manner forward-compatible with
new processor state saved in the signal frame
For now these statically find the maximum signal frame size rather than
doing any runtime testing of features to minimise the size.
glibc 2.34 will take advantage of this, as will applications that use
use _SC_MINSIGSTKSZ and _SC_SIGSTKSZ.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
References: 94b07c1f8c39 ("arm64: signal: Report signal frame size to userspace via auxv")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220307182734.289289-2-npiggin@gmail.com
|
|
The PowerPC vDSO uses $(CC) to link, which differs from the rest of the
kernel, which uses $(LD) directly. As a result, the default linker of
the compiler is used, which may differ from the linker requested by the
builder. For example:
$ make ARCH=powerpc LLVM=1 mrproper defconfig arch/powerpc/kernel/vdso/
...
$ llvm-readelf -p .comment arch/powerpc/kernel/vdso/vdso{32,64}.so.dbg
File: arch/powerpc/kernel/vdso/vdso32.so.dbg
String dump of section '.comment':
[ 0] clang version 14.0.0 (Fedora 14.0.0-1.fc37)
File: arch/powerpc/kernel/vdso/vdso64.so.dbg
String dump of section '.comment':
[ 0] clang version 14.0.0 (Fedora 14.0.0-1.fc37)
LLVM=1 sets LD=ld.lld but ld.lld is not used to link the vDSO; GNU ld is
because "ld" is the default linker for clang on most Linux platforms.
This is a problem for Clang's Link Time Optimization as implemented in
the kernel because use of GNU ld with LTO requires the LLVMgold plugin,
which is not technically supported for ld.bfd per
https://llvm.org/docs/GoldPlugin.html. Furthermore, if LLVMgold.so is
missing from a user's system, the build will fail, even though LTO as it
is implemented in the kernel requires ld.lld to avoid this dependency in
the first place.
Ultimately, the PowerPC vDSO should be converted to compiling and
linking with $(CC) and $(LD) respectively but there were issues last
time this was tried, potentially due to older but supported tool
versions. To avoid regressing GCC + binutils, use the compiler option
'-fuse-ld', which tells the compiler which linker to use when it is
invoked as both the compiler and linker. Use '-fuse-ld=lld' when
LD=ld.lld has been specified (CONFIG_LD_IS_LLD) so that the vDSO is
linked with the same linker as the rest of the kernel.
$ llvm-readelf -p .comment arch/powerpc/kernel/vdso/vdso{32,64}.so.dbg
File: arch/powerpc/kernel/vdso/vdso32.so.dbg
String dump of section '.comment':
[ 0] Linker: LLD 14.0.0
[ 14] clang version 14.0.0 (Fedora 14.0.0-1.fc37)
File: arch/powerpc/kernel/vdso/vdso64.so.dbg
String dump of section '.comment':
[ 0] Linker: LLD 14.0.0
[ 14] clang version 14.0.0 (Fedora 14.0.0-1.fc37)
LD can be a full path to ld.lld, which will not be handled properly by
'-fuse-ld=lld' if the full path to ld.lld is outside of the compiler's
search path. '-fuse-ld' can take a path to the linker but it is
deprecated in clang 12.0.0; '--ld-path' is preferred for this scenario.
Use '--ld-path' if it is supported, as it will handle a full path or
just 'ld.lld' properly. See the LLVM commit below for the full details
of '--ld-path'.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/774
Link: https://github.com/llvm/llvm-project/commit/1bc5c84710a8c73ef21295e63c19d10a8c71f2f5
Link: https://lore.kernel.org/r/20220511185001.3269404-3-nathan@kernel.org
|
|
When linking vdso{32,64}.so.dbg with ld.lld, there is a warning about
not finding _start for the starting address:
ld.lld: warning: cannot find entry symbol _start; not setting start address
ld.lld: warning: cannot find entry symbol _start; not setting start address
Looking at GCC + GNU ld, the entry point address is 0x0:
$ llvm-readelf -h vdso{32,64}.so.dbg &| rg "(File|Entry point address):"
File: vdso32.so.dbg
Entry point address: 0x0
File: vdso64.so.dbg
Entry point address: 0x0
This matches what ld.lld emits:
$ powerpc64le-linux-gnu-readelf -p .comment vdso{32,64}.so.dbg
File: vdso32.so.dbg
String dump of section '.comment':
[ 0] Linker: LLD 14.0.0
[ 14] clang version 14.0.0 (Fedora 14.0.0-1.fc37)
File: vdso64.so.dbg
String dump of section '.comment':
[ 0] Linker: LLD 14.0.0
[ 14] clang version 14.0.0 (Fedora 14.0.0-1.fc37)
$ llvm-readelf -h vdso{32,64}.so.dbg &| rg "(File|Entry point address):"
File: vdso32.so.dbg
Entry point address: 0x0
File: vdso64.so.dbg
Entry point address: 0x0
Remove ENTRY to remove the warning, as it is unnecessary for the vDSO to
function correctly.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220511185001.3269404-2-nathan@kernel.org
|
|
When the mmu_feature_keys[] was introduced in the commit c12e6f24d413
("powerpc: Add option to use jump label for mmu_has_feature()"),
it is unlikely that it would be used either directly or indirectly in
the out of tree modules. So we exported it as GPL only.
But with the evolution of the codes, especially the PPC_KUAP support, it
may be indirectly referenced by some primitive macro or inline functions
such as get_user() or __copy_from_user_inatomic(), this will make it
impossible to build many non GPL modules (such as ZFS) on ppc
architecture. Fix this by exposing the mmu_feature_keys[] to the non-GPL
modules too.
Fixes: 7613f5a66bec ("powerpc/64s/kuap: Use mmu_has_feature()")
Reported-by: Nathaniel Filardo <nwfilardo@gmail.com>
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220329085709.4132729-1-haokexin@gmail.com
|
|
The panic notifiers infrastructure is a bit limited in the scope of
the callbacks - basically every kind of functionality is dropped
in a list that runs in the same point during the kernel panic path.
This is not really on par with the complexities and particularities
of architecture / hypervisors' needs, and a refactor is ongoing.
As part of this refactor, it was observed that powerpc has 2 notifiers,
with mixed goals: one is just a KASLR offset dumper, whereas the other
aims to hard-disable IRQs (necessary on panic path), warn firmware of
the panic event (fadump) and run low-level platform-specific machinery
that might stop kernel execution and never come back.
Clearly, the 2nd notifier has opposed goals: disable IRQs / fadump
should run earlier while low-level platform actions should
run late since it might not even return. Hence, this patch decouples
the notifiers splitting them in three:
- First one is responsible for hard-disable IRQs and fadump,
should run early;
- The kernel KASLR offset dumper is really an informative notifier,
harmless and may run at any moment in the panic path;
- The last notifier should run last, since it aims to perform
low-level actions for specific platforms, and might never return.
It is also only registered for 2 platforms, pseries and ps3.
The patch better documents the notifiers and clears the code too,
also removing a useless header.
Currently no functionality change should be observed, but after
the planned panic refactor we should expect more panic reliability
with this patch.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220427224924.592546-9-gpiccoli@igalia.com
|
|
Merge our KVM topic branch.
|
|
LoPAPR defines guest visible IOMMU with hypercalls to use it -
H_PUT_TCE/etc. Implemented first on POWER7 where hypercalls would trap
in the KVM in the real mode (with MMU off). The problem with the real mode
is some memory is not available and some API usage crashed the host but
enabling MMU was an expensive operation.
The problems with the real mode handlers are:
1. Occasionally these cannot complete the request so the code is
copied+modified to work in the virtual mode, very little is shared;
2. The real mode handlers have to be linked into vmlinux to work;
3. An exception in real mode immediately reboots the machine.
If the small DMA window is used, the real mode handlers bring better
performance. However since POWER8, there has always been a bigger DMA
window which VMs use to map the entire VM memory to avoid calling
H_PUT_TCE. Such 1:1 mapping happens once and uses H_PUT_TCE_INDIRECT
(a bulk version of H_PUT_TCE) which virtual mode handler is even closer
to its real mode version.
On POWER9 hypercalls trap straight to the virtual mode so the real mode
handlers never execute on POWER9 and later CPUs.
So with the current use of the DMA windows and MMU improvements in
POWER9 and later, there is no point in duplicating the code.
The 32bit passed through devices may slow down but we do not have many
of these in practice. For example, with this applied, a 1Gbit ethernet
adapter still demostrates above 800Mbit/s of actual throughput.
This removes the real mode handlers from KVM and related code from
the powernv platform.
This updates the list of implemented hcalls in KVM-HV as the realmode
handlers are removed.
This changes ABI - kvmppc_h_get_tce() moves to the KVM module and
kvmppc_find_table() is static now.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220506053755.3820702-1-aik@ozlabs.ru
|
|
Merge our fixes branch from this cycle. In particular this brings in a
papr_scm.c change which a subsequent patch has a dependency on.
|
|
RTAS runs in real mode (MSR[DR] and MSR[IR] unset) and in 32-bit big
endian mode (MSR[SF,LE] unset).
The change in MSR is done in enter_rtas() in a relatively complex way,
since the MSR value could be hardcoded.
Furthermore, a panic has been reported when hitting the watchdog interrupt
while running in RTAS, this leads to the following stack trace:
watchdog: CPU 24 Hard LOCKUP
watchdog: CPU 24 TB:997512652051031, last heartbeat TB:997504470175378 (15980ms ago)
...
Supported: No, Unreleased kernel
CPU: 24 PID: 87504 Comm: drmgr Kdump: loaded Tainted: G E X 5.14.21-150400.71.1.bz196362_2-default #1 SLE15-SP4 (unreleased) 0d821077ef4faa8dfaf370efb5fdca1fa35f4e2c
NIP: 000000001fb41050 LR: 000000001fb4104c CTR: 0000000000000000
REGS: c00000000fc33d60 TRAP: 0100 Tainted: G E X (5.14.21-150400.71.1.bz196362_2-default)
MSR: 8000000002981000 <SF,VEC,VSX,ME> CR: 48800002 XER: 20040020
CFAR: 000000000000011c IRQMASK: 1
GPR00: 0000000000000003 ffffffffffffffff 0000000000000001 00000000000050dc
GPR04: 000000001ffb6100 0000000000000020 0000000000000001 000000001fb09010
GPR08: 0000000020000000 0000000000000000 0000000000000000 0000000000000000
GPR12: 80040000072a40a8 c00000000ff8b680 0000000000000007 0000000000000034
GPR16: 000000001fbf6e94 000000001fbf6d84 000000001fbd1db0 000000001fb3f008
GPR20: 000000001fb41018 ffffffffffffffff 000000000000017f fffffffffffff68f
GPR24: 000000001fb18fe8 000000001fb3e000 000000001fb1adc0 000000001fb1cf40
GPR28: 000000001fb26000 000000001fb460f0 000000001fb17f18 000000001fb17000
NIP [000000001fb41050] 0x1fb41050
LR [000000001fb4104c] 0x1fb4104c
Call Trace:
Instruction dump:
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
Oops: Unrecoverable System Reset, sig: 6 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
...
Supported: No, Unreleased kernel
CPU: 24 PID: 87504 Comm: drmgr Kdump: loaded Tainted: G E X 5.14.21-150400.71.1.bz196362_2-default #1 SLE15-SP4 (unreleased) 0d821077ef4faa8dfaf370efb5fdca1fa35f4e2c
NIP: 000000001fb41050 LR: 000000001fb4104c CTR: 0000000000000000
REGS: c00000000fc33d60 TRAP: 0100 Tainted: G E X (5.14.21-150400.71.1.bz196362_2-default)
MSR: 8000000002981000 <SF,VEC,VSX,ME> CR: 48800002 XER: 20040020
CFAR: 000000000000011c IRQMASK: 1
GPR00: 0000000000000003 ffffffffffffffff 0000000000000001 00000000000050dc
GPR04: 000000001ffb6100 0000000000000020 0000000000000001 000000001fb09010
GPR08: 0000000020000000 0000000000000000 0000000000000000 0000000000000000
GPR12: 80040000072a40a8 c00000000ff8b680 0000000000000007 0000000000000034
GPR16: 000000001fbf6e94 000000001fbf6d84 000000001fbd1db0 000000001fb3f008
GPR20: 000000001fb41018 ffffffffffffffff 000000000000017f fffffffffffff68f
GPR24: 000000001fb18fe8 000000001fb3e000 000000001fb1adc0 000000001fb1cf40
GPR28: 000000001fb26000 000000001fb460f0 000000001fb17f18 000000001fb17000
NIP [000000001fb41050] 0x1fb41050
LR [000000001fb4104c] 0x1fb4104c
Call Trace:
Instruction dump:
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
---[ end trace 3ddec07f638c34a2 ]---
This happens because MSR[RI] is unset when entering RTAS but there is no
valid reason to not set it here.
RTAS is expected to be called with MSR[RI] as specified in PAPR+ section
"7.2.1 Machine State":
R1–7.2.1–9. If called with MSR[RI] equal to 1, then RTAS must protect
its own critical regions from recursion by setting the MSR[RI] bit to
0 when in the critical regions.
Fixing this by reviewing the way MSR is compute before calling RTAS. Now a
hardcoded value meaning real mode, 32 bits big endian mode and Recoverable
Interrupt is loaded. In the case MSR[S] is set, it will remain set while
entering RTAS as only urfid can unset it (thanks Fabiano).
In addition a check is added in do_enter_rtas() to detect calls made with
MSR[RI] unset, as we are forcing it on later.
This patch has been tested on the following machines:
Power KVM Guest
P8 S822L (host Ubuntu kernel 5.11.0-49-generic)
PowerVM LPAR
P8 9119-MME (FW860.A1)
p9 9008-22L (FW950.00)
P10 9080-HEX (FW1010.00)
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220504101244.12107-1-ldufour@linux.ibm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix the DWARF CFI in our VDSO time functions, allowing gdb to
backtrace through them correctly.
- Fix a buffer overflow in the papr_scm driver, only triggerable by
hypervisor input.
- A fix in the recently added QoS handling for VAS (used for
communicating with coprocessors).
Thanks to Alan Modra, Haren Myneni, Kajol Jain, and Segher Boessenkool.
* tag 'powerpc-5.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/papr_scm: Fix buffer overflow issue with CONFIG_FORTIFY_SOURCE
powerpc/vdso: Fix incorrect CFI in gettimeofday.S
powerpc/pseries/vas: Use QoS credits from the userspace
|
|
__do_irq() inconditionnaly calls ppc_md.get_irq()
That's definitely a hot path.
At the time being ppc_md.get_irq address is read every time
from ppc_md structure.
Replace that call by a static call, and initialise that
call after ppc_md.init_IRQ() has set ppc_md.get_irq.
Emit a warning and don't set the static call if ppc_md.init_IRQ()
is still NULL, that way the kernel won't blow up if for some
reason ppc_md.get_irq() doesn't get properly set.
With the patch:
00000000 <__SCT__ppc_get_irq>:
0: 48 00 00 20 b 20 <__static_call_return0> <== Replaced by 'b <ppc_md.get_irq>' at runtime
...
00000020 <__static_call_return0>:
20: 38 60 00 00 li r3,0
24: 4e 80 00 20 blr
...
00000058 <__do_irq>:
...
64: 48 00 00 01 bl 64 <__do_irq+0xc>
64: R_PPC_REL24 __SCT__ppc_get_irq
68: 2c 03 00 00 cmpwi r3,0
...
Before the patch:
00000038 <__do_irq>:
...
3c: 3d 20 00 00 lis r9,0
3e: R_PPC_ADDR16_HA ppc_md+0x1c
...
44: 81 29 00 00 lwz r9,0(r9)
46: R_PPC_ADDR16_LO ppc_md+0x1c
...
4c: 7d 29 03 a6 mtctr r9
50: 4e 80 04 21 bctrl
54: 2c 03 00 00 cmpwi r3,0
...
On PPC64 which doesn't implement static calls yet we get:
00000000000000d0 <__do_irq>:
...
dc: 00 00 22 3d addis r9,r2,0
dc: R_PPC64_TOC16_HA .data+0x8
...
e4: 00 00 89 e9 ld r12,0(r9)
e4: R_PPC64_TOC16_LO_DS .data+0x8
...
f0: a6 03 89 7d mtctr r12
f4: 18 00 41 f8 std r2,24(r1)
f8: 21 04 80 4e bctrl
fc: 18 00 41 e8 ld r2,24(r1)
...
So on PPC64 that's similar to what we get without static calls.
But at least until ppc_md.get_irq() is set the call is to
__static_call_return0.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/afb92085f930651d8b1063e4d4bf0396c80ebc7d.1647002274.git.christophe.leroy@csgroup.eu
|
|
Don't inherit headers "by chances" from asm/prom.h, asm/mpc52xx.h,
asm/pci.h etc...
Include the needed headers, and remove asm/prom.h when it was
needed exclusively for pulling necessary headers.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/be8bdc934d152a7d8ee8d1a840d5596e2f7d85e0.1646767214.git.christophe.leroy@csgroup.eu
|
|
Several files include asm/prom.h for no reason.
Clean it up.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Drop change to prom_parse.c as reported by lkp@intel.com]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7c9b8fda63dcf63e1b28f43e7ebdb95182cbc286.1646767214.git.christophe.leroy@csgroup.eu
|
|
Add fn and fn_arg members into struct kernel_clone_args and test for
them in copy_thread (instead of testing for PF_KTHREAD | PF_IO_WORKER).
This allows any task that wants to be a user space task that only runs
in kernel mode to use this functionality.
The code on x86 is an exception and still retains a PF_KTHREAD test
because x86 unlikely everything else handles kthreads slightly
differently than user space tasks that start with a function.
The functions that created tasks that start with a function
have been updated to set ".fn" and ".fn_arg" instead of
".stack" and ".stack_size". These functions are fork_idle(),
create_io_thread(), kernel_thread(), and user_mode_thread().
Link: https://lkml.kernel.org/r/20220506141512.516114-4-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
With io_uring we have started supporting tasks that are for most
purposes user space tasks that exclusively run code in kernel mode.
The kernel task that exec's init and tasks that exec user mode
helpers are also user mode tasks that just run kernel code
until they call kernel execve.
Pass kernel_clone_args into copy_thread so these oddball
tasks can be supported more cleanly and easily.
v2: Fix spelling of kenrel_clone_args on h8300
Link: https://lkml.kernel.org/r/20220506141512.516114-2-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Move pci_device_from_OF_node() in pci64.c because it needs definition
of struct device_node and is not worth inlining.
ppc32.c already has it in pci32.c.
That way pci-bridge.h doesn't need linux/of.h (Brought by asm/prom.h
via asm/pci.h)
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3c88286b55413730d7784133993a46ef4a3607ce.1646767214.git.christophe.leroy@csgroup.eu
|
|
emulate_step() instruction emulation including sc instruction emulation
initially appeared in xmon. It was then moved into sstep.c where kprobes
could use it too, and later hw_breakpoint and uprobes started to use it.
Until uprobes, the only instruction emulation users were for kernel
mode instructions.
- xmon only steps / breaks on kernel addresses.
- kprobes is kernel only.
- hw_breakpoint only emulates kernel instructions, single steps user.
At one point, there was support for the kernel to execute sc
instructions, although that is long removed and it's not clear whether
there were any in-tree users. So system call emulation is not required
by the above users.
uprobes uses emulate_step and it appears possible to emulate sc
instruction in userspace. Userspace system call emulation is broken and
it's not clear it ever worked well.
The big complication is that userspace takes an interrupt to the kernel
to emulate the instruction. The user->kernel interrupt sets up registers
and interrupt stack frame expecting to return to userspace, then system
call instruction emulation re-directs that stack frame to the kernel,
early in the system call interrupt handler. This means the interrupt
return code takes the kernel->kernel restore path, which does not
restore everything as the system call interrupt handler would expect
coming from userspace. regs->iamr appears to get lost for example,
because the kernel->kernel return does not restore the user iamr.
Accounting such as irqflags tracing and CPU accounting does not get
flipped back to user mode as the system call handler expects, so those
appear to enter the kernel twice without returning to userspace.
These things may be individually fixable with various complication, but
it is a big complexity for unclear real benefit.
Furthermore, it is not possible to single step a system call instruction
since it causes an interrupt. As such, a separate patch disables probing
on system call instructions.
This patch removes system call emulation and disables stepping system
calls.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[minor commit log edit, and also get rid of '#ifdef CONFIG_PPC64']
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a412e3b3791ed83de18704c8d90f492e7a0049c0.1648648712.git.naveen.n.rao@linux.vnet.ibm.com
|
|
Per the ISA, a Trace interrupt is not generated for:
- [h|u]rfi[d]
- rfscv
- sc, scv, and Trap instructions that trap
- Power-Saving Mode instructions
- other instructions that cause interrupts (other than Trace interrupts)
- the first instructions of any interrupt handler (applies to Branch and Single Step tracing;
CIABR matches may still occur)
- instructions that are emulated by software
Add a helper to check for instructions belonging to the first four
categories above and to reject kprobes, uprobes and xmon breakpoints on
such instructions. We reject probing on instructions belonging to these
categories across all ISA versions and across both BookS and BookE.
For trap instructions, we can't know in advance if they can cause a
trap, and there is no good reason to allow probing on those. Also,
uprobes already refuses to probe trap instructions and kprobes does not
allow probes on trap instructions used for kernel warnings and bugs. As
such, stop allowing any type of probes/breakpoints on trap instruction
across uprobes, kprobes and xmon.
For some of the fp/altivec instructions that can generate an interrupt
and which we emulate in the kernel (altivec assist, for example), we
check and turn off single stepping in emulate_single_step().
Instructions generating a DSI are restarted and single stepping normally
completes once the instruction is completed.
In uprobes, if a single stepped instruction results in a non-fatal
signal to be delivered to the task, such signals are "delayed" until
after the instruction completes. For fatal signals, single stepping is
cancelled and the instruction restarted in-place so that core dump
captures proper addresses.
In kprobes, we do not allow probes on instructions having an extable
entry and we also do not allow probing interrupt vectors.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f56ee979d50b8711fae350fc97870f3ca34acd75.1648648712.git.naveen.n.rao@linux.vnet.ibm.com
|
|
Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220430185654.5855-1-Julia.Lawall@inria.fr
|
|
arch_randomize_brk() is only needed for hash on book3s/64, for other
platforms the one provided by the default mmap layout is good enough.
Move it to hash_utils.c and use randomize_page() like the generic one.
And properly opt out the radix case instead of making an assumption
on mmu_highuser_ssize.
Also change to a 32M range like most other architectures instead of 8M.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/eafa4d18ec8ac7b98dd02b40181e61643707cc7c.1649523076.git.christophe.leroy@csgroup.eu
|
|
CONFIG_PPC_MM_SLICES is always selected by hash book3s/64.
CONFIG_PPC_MM_SLICES is never selected by other platforms.
Remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/dc2cdc204de8978574bf7c02329b6cfc4db0bce7.1649523076.git.christophe.leroy@csgroup.eu
|
|
Merge master into next, to bring in commit 5f24d5a579d1 ("mm, hugetlb:
allow for "high" userspace addresses"), which is needed as a
prerequisite for the series converting powerpc to the generic mmap
logic.
|
|
As reported by Alan, the CFI (Call Frame Information) in the VDSO time
routines is incorrect since commit ce7d8056e38b ("powerpc/vdso: Prepare
for switching VDSO to generic C implementation.").
DWARF has a concept called the CFA (Canonical Frame Address), which on
powerpc is calculated as an offset from the stack pointer (r1). That
means when the stack pointer is changed there must be a corresponding
CFI directive to update the calculation of the CFA.
The current code is missing those directives for the changes to r1,
which prevents gdb from being able to generate a backtrace from inside
VDSO functions, eg:
Breakpoint 1, 0x00007ffff7f804dc in __kernel_clock_gettime ()
(gdb) bt
#0 0x00007ffff7f804dc in __kernel_clock_gettime ()
#1 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6
#2 0x00007fffffffd960 in ?? ()
#3 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6
Backtrace stopped: frame did not save the PC
Alan helpfully describes some rules for correctly maintaining the CFI information:
1) Every adjustment to the current frame address reg (ie. r1) must be
described, and exactly at the instruction where r1 changes. Why?
Because stack unwinding might want to access previous frames.
2) If a function changes LR or any non-volatile register, the save
location for those regs must be given. The CFI can be at any
instruction after the saves up to the point that the reg is
changed.
(Exception: LR save should be described before a bl. not after)
3) If asychronous unwind info is needed then restores of LR and
non-volatile regs must also be described. The CFI can be at any
instruction after the reg is restored up to the point where the
save location is (potentially) trashed.
Fix the inability to backtrace by adding CFI directives describing the
changes to r1, ie. satisfying rule 1.
Also change the information for LR to point to the copy saved on the
stack, not the value in r0 that will be overwritten by the function
call.
Finally, add CFI directives describing the save/restore of r2.
With the fix gdb can correctly back trace and navigate up and down the stack:
Breakpoint 1, 0x00007ffff7f804dc in __kernel_clock_gettime ()
(gdb) bt
#0 0x00007ffff7f804dc in __kernel_clock_gettime ()
#1 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6
#2 0x0000000100015b60 in gettime ()
#3 0x000000010000c8bc in print_long_format ()
#4 0x000000010000d180 in print_current_files ()
#5 0x00000001000054ac in main ()
(gdb) up
#1 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6
(gdb)
#2 0x0000000100015b60 in gettime ()
(gdb)
#3 0x000000010000c8bc in print_long_format ()
(gdb)
#4 0x000000010000d180 in print_current_files ()
(gdb)
#5 0x00000001000054ac in main ()
(gdb)
Initial frame selected; you cannot go up.
(gdb) down
#4 0x000000010000d180 in print_current_files ()
(gdb)
#3 0x000000010000c8bc in print_long_format ()
(gdb)
#2 0x0000000100015b60 in gettime ()
(gdb)
#1 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6
(gdb)
#0 0x00007ffff7f804dc in __kernel_clock_gettime ()
(gdb)
Fixes: ce7d8056e38b ("powerpc/vdso: Prepare for switching VDSO to generic C implementation.")
Cc: stable@vger.kernel.org # v5.11+
Reported-by: Alan Modra <amodra@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/r/20220502125010.1319370-1-mpe@ellerman.id.au
|
|
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings.
Also, error return codes don't mean anything to obsolete_checksetup() --
only non-zero (usually 1) or zero. So return 1 from powersave_off().
Fixes: 302eca184fb8 ("[POWERPC] cell: use ppc_md->power_save instead of cbe_idle_loop")
Reported-by: Igor Zhbanov <izh1979@gmail.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220502192925.19954-1-rdunlap@infradead.org
|
|
These one line of code don't meet the kernel coding style, so remove the
redundant space.
Signed-off-by: maqiang <maqianga@uniontech.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210303115710.30886-1-maqianga@uniontech.com
|
|
Clean the following coccicheck warning:
./arch/powerpc/kernel/fadump.c:1291:34-35: WARNING opportunity for
swap().
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220129034847.76902-1-jiapeng.chong@linux.alibaba.com
|
|
Fix typos of 'remaining' and 'those'.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Matthew Wilcox <willy@infradead.org> # 'remaining'
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211030002619.2063-1-rdunlap@infradead.org
|
|
The simple_strtoull() function is deprecated in some situation, since
it does not check for the range overflow, use kstrtoull() instead.
Signed-off-by: Chen Huang <chenhuang5@huawei.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210526092020.554341-1-chenhuang5@huawei.com
|
|
The sparse tool complains as follow:
arch/powerpc/kernel/btext.c:48:5: warning:
symbol 'boot_text_mapped' was not declared. Should it be static?
This symbol is not used outside of btext.c, so this commit make
it static.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408011801.557004-3-yukuai3@huawei.com
|
|
Fixes gcc '-Wunused-but-set-variable' warning:
arch/powerpc/kernel/btext.c:49:12: error: 'force_printk_to_btext'
defined but not used.
It is never used, and so can be removed.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408011801.557004-2-yukuai3@huawei.com
|
|
We found these warnings in arch/powerpc/kernel/time.c as follows:
warning: symbol 'decrementer_max' was not declared. Should it be static?
warning: symbol 'rtc_lock' was not declared. Should it be static?
warning: symbol 'dtl_consumer' was not declared. Should it be static?
Declare 'decrementer_max' in powerpc asm/time.h.
Include linux/mc146818rtc.h in powerpc kernel/time.c where 'rtc_lock' is
declared. And remove duplicated declaration of 'rtc_lock' in powerpc
platforms/chrp/time.c because it has included linux/mc146818rtc.h.
Move 'dtl_consumer' definition after "include <asm/dtl.h>" because it is
declared there.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: He Ying <heying24@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210324090939.143477-1-heying24@huawei.com
|
|
Patch series "Convert vmcore to use an iov_iter", v5.
For some reason several people have been sending bad patches to fix
compiler warnings in vmcore recently. Here's how it should be done.
Compile-tested only on x86. As noted in the first patch, s390 should take
this conversion a bit further, but I'm not inclined to do that work
myself.
This patch (of 3):
Instead of passing in a 'buf' and 'userbuf' argument, pass in an iov_iter.
s390 needs more work to pass the iov_iter down further, or refactor, but
I'd be more comfortable if someone who can test on s390 did that work.
It's more convenient to convert the whole of read_from_oldmem() to take an
iov_iter at the same time, so rename it to read_from_oldmem_iter() and add
a temporary read_from_oldmem() wrapper that creates an iov_iter.
Link: https://lkml.kernel.org/r/20220408090636.560886-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20220408090636.560886-2-bhe@redhat.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On crash, boot memory area is copied to a destination address by f/w.
This region is setup as separate PT_LOAD segment with appropriate
offset to handle the different physical address and offset in vmcore.
If this destination address is not page aligned, reading the vmcore
with mmap is likely to fail forcing tools like makedumpfile to fall
back to regular read. Avoid mmap read failure by ensuring that the
destination address is always page aligned.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220406093839.206608-3-hbathini@linux.ibm.com
|
|
Boot memory area is setup as separate PT_LOAD segment in the vmcore
as it is moved by f/w, on crash, to a destination address provided by
the kernel. Having separate PT_LOAD segment helps in handling the
different physical address and offset for boot memory area in the
vmcore.
Commit ced1bf52f477 ("powerpc/fadump: merge adjacent memory ranges to
reduce PT_LOAD segements") inadvertly broke this pre-condition for
cases where some of the first kernel memory is available adjacent to
boot memory area. This scenario is rare but possible when memory for
fadump could not be reserved adjacent to boot memory area owing to
memory hole or such. Reading memory from a vmcore exported in such
scenario provides incorrect data. Fix it by ensuring no other region
is folded into boot memory area.
Fixes: ced1bf52f477 ("powerpc/fadump: merge adjacent memory ranges to reduce PT_LOAD segements")
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220406093839.206608-2-hbathini@linux.ibm.com
|
|
An LPAR can be terminated by the POWER Hypervisor (PHYP) for various
reasons. If FADump was configured when PHYP terminates the LPAR,
platform-assisted dump is initiated to save the kernel dump. But CPU
register data would not be processed/saved in the vmcore in such case
because CPU mask is set in crash_fadump() at the time of kernel crash
and it remains unset in this case with LPAR being terminated by PHYP
abruptly.
To get around the problem, initialize cpu_mask to cpu_possible_mask
so as to ensure all possible CPUs' register data is processed for the
vmcore generated on PHYP terminated LPAR. Also, rename the crash info
member variable from online_mask to cpu_mask as it doesn't necessarily
have to be online CPU mask always.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220404182137.59231-1-hbathini@linux.ibm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Partly revert a change to our timer_interrupt() that caused lockups
with high res timers disabled.
- Fix a bug in KVM TCE handling that could corrupt kernel memory.
- Two commits fixing Power9/Power10 perf alternative event selection.
Thanks to Alexey Kardashevskiy, Athira Rajeev, David Gibson, Frederic
Barrat, Madhavan Srinivasan, Miguel Ojeda, and Nicholas Piggin.
* tag 'powerpc-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/perf: Fix 32bit compile
powerpc/perf: Fix power10 event alternatives
powerpc/perf: Fix power9 event alternatives
KVM: PPC: Fix TCE handling for VFIO
powerpc/time: Always set decrementer in timer_interrupt()
|
|
This is a partial revert of commit 0faf20a1ad16 ("powerpc/64s/interrupt:
Don't enable MSR[EE] in irq handlers unless perf is in use").
Prior to that commit, we always set the decrementer in
timer_interrupt(), to clear the timer interrupt. Otherwise we could end
up continuously taking timer interrupts.
When high res timers are enabled there is no problem seen with leaving
the decrementer untouched in timer_interrupt(), because it will be
programmed via hrtimer_interrupt() -> tick_program_event() ->
clockevents_program_event() -> decrementer_set_next_event().
However with CONFIG_HIGH_RES_TIMERS=n or booting with highres=off, we
see a stall/lockup, because tick_nohz_handler() does not cause a
reprogram of the decrementer, leading to endless timer interrupts.
Example trace:
[ 1.898617][ T7] Freeing initrd memory: 2624K^M
[ 22.680919][ C1] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:^M
[ 22.682281][ C1] rcu: 0-....: (25 ticks this GP) idle=073/0/0x1 softirq=10/16 fqs=1050 ^M
[ 22.682851][ C1] (detected by 1, t=2102 jiffies, g=-1179, q=476)^M
[ 22.683649][ C1] Sending NMI from CPU 1 to CPUs 0:^M
[ 22.685252][ C0] NMI backtrace for cpu 0^M
[ 22.685649][ C0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.16.0-rc2-00185-g0faf20a1ad16 #145^M
[ 22.686393][ C0] NIP: c000000000016d64 LR: c000000000f6cca4 CTR: c00000000019c6e0^M
[ 22.686774][ C0] REGS: c000000002833590 TRAP: 0500 Not tainted (5.16.0-rc2-00185-g0faf20a1ad16)^M
[ 22.687222][ C0] MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24000222 XER: 00000000^M
[ 22.688297][ C0] CFAR: c00000000000c854 IRQMASK: 0 ^M
...
[ 22.692637][ C0] NIP [c000000000016d64] arch_local_irq_restore+0x174/0x250^M
[ 22.694443][ C0] LR [c000000000f6cca4] __do_softirq+0xe4/0x3dc^M
[ 22.695762][ C0] Call Trace:^M
[ 22.696050][ C0] [c000000002833830] [c000000000f6cc80] __do_softirq+0xc0/0x3dc (unreliable)^M
[ 22.697377][ C0] [c000000002833920] [c000000000151508] __irq_exit_rcu+0xd8/0x130^M
[ 22.698739][ C0] [c000000002833950] [c000000000151730] irq_exit+0x20/0x40^M
[ 22.699938][ C0] [c000000002833970] [c000000000027f40] timer_interrupt+0x270/0x460^M
[ 22.701119][ C0] [c0000000028339d0] [c0000000000099a8] decrementer_common_virt+0x208/0x210^M
Possibly this should be fixed in the lowres timing code, but that would
be a generic change and could take some time and may not backport
easily, so for now make the programming of the decrementer unconditional
again in timer_interrupt() to avoid the stall/lockup.
Fixes: 0faf20a1ad16 ("powerpc/64s/interrupt: Don't enable MSR[EE] in irq handlers unless perf is in use")
Reported-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Link: https://lore.kernel.org/r/20220420141657.771442-1-mpe@ellerman.id.au
|
|
Huge page backed vmalloc memory could benefit performance in many cases.
However, some users of vmalloc may not be ready to handle huge pages for
various reasons: hardware constraints, potential pages split, etc.
VM_NO_HUGE_VMAP was introduced to allow vmalloc users to opt-out huge
pages. However, it is not easy to track down all the users that require
the opt-out, as the allocation are passed different stacks and may cause
issues in different layers.
To address this issue, replace VM_NO_HUGE_VMAP with an opt-in flag,
VM_ALLOW_HUGE_VMAP, so that users that benefit from huge pages could ask
specificially.
Also, remove vmalloc_no_huge() and add opt-in helper vmalloc_huge().
Fixes: fac54e2bfb5b ("x86/Kconfig: Select HAVE_ARCH_HUGE_VMALLOC with HAVE_ARCH_HUGE_VMAP")
Link: https://lore.kernel.org/netdev/14444103-d51b-0fb3-ee63-c3f182f0b546@molgen.mpg.de/"
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Power SVM wants to allocate a swiotlb buffer that is not restricted to
low memory for the trusted hypervisor scheme. Consolidate the support
for this into the swiotlb_init interface by adding a new flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
x86-32 was the last architecture that implemented separate user and
kernel registers.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220325153953.162643-3-brgerst@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix KVM "lost kick" race, where an attempt to pull a vcpu out of the
guest could be lost (or delayed until the next guest exit).
- Disable SCV (system call vectored) when PR KVM guests could be run.
- Fix KVM PR guests using SCV, by disallowing AIL != 0 for KVM PR
guests.
- Add a new KVM CAP to indicate if AIL == 3 is supported.
- Fix a regression when hotplugging a CPU to a memoryless/cpuless node.
- Make virt_addr_valid() stricter for 64-bit Book3E & 32-bit, which
fixes crashes seen due to hardened usercopy.
- Revert a change to max_mapnr which broke HIGHMEM.
Thanks to Christophe Leroy, Fabiano Rosas, Kefeng Wang, Nicholas Piggin,
and Srikar Dronamraju.
* tag 'powerpc-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
Revert "powerpc: Set max_mapnr correctly"
powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit
KVM: PPC: Move kvmhv_on_pseries() into kvm_ppc.h
powerpc/numa: Handle partially initialized numa nodes
powerpc/64: Fix build failure with allyesconfig in book3s_64_entry.S
KVM: PPC: Use KVM_CAP_PPC_AIL_MODE_3
KVM: PPC: Book3S PR: Disallow AIL != 0
KVM: PPC: Book3S PR: Disable SCV when AIL could be disabled
KVM: PPC: Book3S HV P9: Fix "lost kick" race
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
* tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Make $(LLVM) more flexible
kbuild: add --target to correctly cross-compile UAPI headers with Clang
fixdep: use fflush() and ferror() to ensure successful write to files
arch: syscalls: simplify uapi/kapi directory creation
usr/include: replace extra-y with always-y
certs: simplify empty certs creation in certs/Makefile
certs: include certs/signing_key.x509 unconditionally
kallsyms: ignore all local labels prefixed by '.L'
kconfig: fix missing '# end of' for empty menu
kconfig: add fflush() before ferror() check
kbuild: replace $(if A,A,B) with $(or A,B)
kbuild: Add environment variables for userprogs flags
kbuild: unify cmd_copy and cmd_shipped
|
|
$(shell ...) expands to empty. There is no need to assign it to _dummy.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ptrace cleanups from Eric Biederman:
"This set of changes removes tracehook.h, moves modification of all of
the ptrace fields inside of siglock to remove races, adds a missing
permission check to ptrace.c
The removal of tracehook.h is quite significant as it has been a major
source of confusion in recent years. Much of that confusion was around
task_work and TIF_NOTIFY_SIGNAL (which I have now decoupled making the
semantics clearer).
For people who don't know tracehook.h is a vestiage of an attempt to
implement uprobes like functionality that was never fully merged, and
was later superseeded by uprobes when uprobes was merged. For many
years now we have been removing what tracehook functionaly a little
bit at a time. To the point where anything left in tracehook.h was
some weird strange thing that was difficult to understand"
* tag 'ptrace-cleanups-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ptrace: Remove duplicated include in ptrace.c
ptrace: Check PTRACE_O_SUSPEND_SECCOMP permission on PTRACE_SEIZE
ptrace: Return the signal to continue with from ptrace_stop
ptrace: Move setting/clearing ptrace_message into ptrace_stop
tracehook: Remove tracehook.h
resume_user_mode: Move to resume_user_mode.h
resume_user_mode: Remove #ifdef TIF_NOTIFY_RESUME in set_notify_resume
signal: Move set_notify_signal and clear_notify_signal into sched/signal.h
task_work: Decouple TIF_NOTIFY_SIGNAL and task_work
task_work: Call tracehook_notify_signal from get_signal on all architectures
task_work: Introduce task_work_pending
task_work: Remove unnecessary include from posix_timers.h
ptrace: Remove tracehook_signal_handler
ptrace: Remove arch_syscall_{enter,exit}_tracehook
ptrace: Create ptrace_report_syscall_{entry,exit} in ptrace.h
ptrace/arm: Rename tracehook_report_syscall report_syscall
ptrace: Move ptrace_report_syscall into ptrace.h
|
