summaryrefslogtreecommitdiff
path: root/arch/riscv/kernel
AgeCommit message (Collapse)Author
2022-08-12Merge tag 'riscv-for-linus-5.20-mw2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: "There's still a handful of new features in here, but there are a lot of fixes/cleanups as well: - Support for the Zicbom extension for explicit cache-block management, along with the necessary bits to make the non-standard cache management ops on the Allwinner D1 function - Support for the Zihintpause extension, which codifies a go-slow instruction used for cpu_relax() - Support for the Sstc extension for supervisor-mode timer/counter management - Many device tree fixes and cleanups, including a large set for the Canaan device trees - A handful of fixes and cleanups for the PMU driver" * tag 'riscv-for-linus-5.20-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (43 commits) dt-bindings: gpio: sifive: add gpio-line-names wireguard: selftests: set CONFIG_NONPORTABLE on riscv32 RISC-V: KVM: Support sstc extension RISC-V: Improve SBI definitions RISC-V: Move counter info definition to sbi header file RISC-V: Fix SBI PMU calls for RV32 RISC-V: Update user page mapping only once during start RISC-V: Fix counter restart during overflow for RV32 RISC-V: Prefer sstc extension if available RISC-V: Enable sstc extension parsing from DT RISC-V: Add SSTC extension CSR details riscv:uprobe fix SR_SPIE set/clear handling dt-bindings: riscv: fix SiFive l2-cache's cache-sets riscv: ensure cpu_ops_sbi is declared RISC-V: cpu_ops_spinwait.c should include head.h RISC-V: Declare cpu_ops_spinwait in <asm/cpu_ops.h> riscv: dts: starfive: correct number of external interrupts riscv: dts: sifive unmatched: Add PWM controlled LEDs riscv/purgatory: Omit use of bin2c riscv/purgatory: hard-code obj-y in Makefile ...
2022-08-11RISC-V: Add Sstc extension supportPalmer Dabbelt
This series implements Sstc extension support which was ratified recently. Before the Sstc extension, an SBI call is necessary to generate timer interrupts as only M-mode have access to the timecompare registers. Thus, there is significant latency to generate timer interrupts at kernel. For virtualized enviornments, its even worse as the KVM handles the SBI call and uses a software timer to emulate the timecomapre register. Sstc extension solves both these problems by defining a stimecmp/vstimecmp at supervisor (host/guest) level. It allows kernel to program a timer and recieve interrupt without supervisor execution enviornment (M-mode/HS mode) intervention. * palmer/riscv-sstc: RISC-V: Prefer sstc extension if available RISC-V: Enable sstc extension parsing from DT RISC-V: Add SSTC extension CSR details
2022-08-11RISC-V: Enable sstc extension parsing from DTAtish Patra
The ISA extension framework now allows parsing any multi-letter ISA extension. Enable that for sstc extension. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Atish Patra <atishp@rivosinc.com> Link: https://lore.kernel.org/r/20220722165047.519994-3-atishp@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-11riscv:uprobe fix SR_SPIE set/clear handlingYipeng Zou
In riscv the process of uprobe going to clear spie before exec the origin insn,and set spie after that.But When access the page which origin insn has been placed a page fault may happen and irq was disabled in arch_uprobe_pre_xol function,It cause a WARN as follows. There is no need to clear/set spie in arch_uprobe_pre/post/abort_xol. We can just remove it. [ 31.684157] BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1488 [ 31.684677] in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 76, name: work [ 31.684929] preempt_count: 0, expected: 0 [ 31.685969] CPU: 2 PID: 76 Comm: work Tainted: G [ 31.686542] Hardware name: riscv-virtio,qemu (DT) [ 31.686797] Call Trace: [ 31.687053] [<ffffffff80006442>] dump_backtrace+0x30/0x38 [ 31.687699] [<ffffffff80812118>] show_stack+0x40/0x4c [ 31.688141] [<ffffffff8081817a>] dump_stack_lvl+0x44/0x5c [ 31.688396] [<ffffffff808181aa>] dump_stack+0x18/0x20 [ 31.688653] [<ffffffff8003e454>] __might_resched+0x114/0x122 [ 31.688948] [<ffffffff8003e4b2>] __might_sleep+0x50/0x7a [ 31.689435] [<ffffffff80822676>] down_read+0x30/0x130 [ 31.689728] [<ffffffff8000b650>] do_page_fault+0x166/x446 [ 31.689997] [<ffffffff80003c0c>] ret_from_exception+0x0/0xc Fixes: 74784081aac8 ("riscv: Add uprobes supported") Signed-off-by: Yipeng Zou <zouyipeng@huawei.com> Reviewed-by: Guo Ren <guoren@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220721065820.245755-1-zouyipeng@huawei.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-11riscv: ensure cpu_ops_sbi is declaredConor Dooley
Sparse complains that cpu_ops_sbi is used undeclared: arch/riscv/kernel/cpu_ops_sbi.c:17:29: warning: symbol 'cpu_ops_sbi' was not declared. Should it be static? Fix the warning by adding cpu_ops_sbi to cpu_ops_sbi.h & including that where used. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20220714080235.3853374-1-conor.dooley@microchip.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-11RISC-V: cpu_ops_spinwait.c should include head.hBen Dooks
Running sparse shows cpu_ops_spinwait.c is missing two definitions found in head.h, so include it to stop the following warnings: arch/riscv/kernel/cpu_ops_spinwait.c:15:6: warning: symbol '__cpu_spinwait_stack_pointer' was not declared. Should it be static? arch/riscv/kernel/cpu_ops_spinwait.c:16:6: warning: symbol '__cpu_spinwait_task_pointer' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@sifive.com> Link: https://lore.kernel.org/r/20220713215306.94675-1-ben.dooks@sifive.com Fixes: c78f94f35cf6 ("RISC-V: Use __cpu_up_stack/task_pointer only for spinwait method") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-11RISC-V: Declare cpu_ops_spinwait in <asm/cpu_ops.h>Ben Dooks
The cpu_ops_spinwait is used in a couple of places in arch/riscv and is causing a sparse warning due to no declaration. Add this to <asm/cpu_ops.h> with the others to fix the following: arch/riscv/kernel/cpu_ops_spinwait.c:16:29: warning: symbol 'cpu_ops_spinwait' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@sifive.com> Link: https://lore.kernel.org/r/20220714071811.187491-1-ben.dooks@sifive.com [Palmer: Drop the extern from cpu_ops.c] Fixes: 2ffc48fc7071 ("RISC-V: Move spinwait booting method to its own config") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-11RISC-V: fixups to work with crash toolPalmer Dabbelt
A handful of fixes to our kexec/crash kernel support that allow crash tool to function. Link: https://lore.kernel.org/r/mhng-f5fdaa37-e99a-4214-a297-ec81f0fed0c1@palmer-mbp2014 * commit 'f9293ad46d8ba9909187a37b7215324420ad4596': RISC-V: Add modules to virtual kernel memory layout dump RISC-V: Fixup schedule out issue in machine_crash_shutdown() RISC-V: Fixup get incorrect user mode PC for kernel mode regs RISC-V: kexec: Fixup use of smp_processor_id() in preemptible context
2022-08-11riscv: traps_misaligned: do not duplicate stringifyKrzysztof Kozlowski
Use existing stringify macro from the kernel headers. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Anup Patel <anup@brainfault.org> Link: https://lore.kernel.org/r/20220623112905.253157-1-krzysztof.kozlowski@linaro.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-11RISC-V: Fixup schedule out issue in machine_crash_shutdown()Xianting Tian
Current task of executing crash kexec will be schedule out when panic is triggered by RCU Stall, as it needs to wait rcu completion. It lead to inability to enter the crash system. The implementation of machine_crash_shutdown() is non-standard for RISC-V according to other Arch's implementation(eg, x86, arm64), we need to send IPI to stop secondary harts. [224521.877268] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [224521.883471] rcu: 0-...0: (3 GPs behind) idle=cfa/0/0x1 softirq=3968793/3968793 fqs=2495 [224521.891742] (detected by 2, t=5255 jiffies, g=60855593, q=328) [224521.897754] Task dump for CPU 0: [224521.901074] task:swapper/0 state:R running task stack: 0 pid: 0 ppid: 0 flags:0x00000008 [224521.911090] Call Trace: [224521.913638] [<ffffffe000c432de>] __schedule+0x208/0x5ea [224521.918957] Kernel panic - not syncing: RCU Stall [224521.923773] bad: scheduling from the idle thread! [224521.928571] CPU: 2 PID: 0 Comm: swapper/2 Kdump: loaded Tainted: G O 5.10.113-yocto-standard #1 [224521.938658] Call Trace: [224521.941200] [<ffffffe00020395c>] walk_stackframe+0x0/0xaa [224521.946689] [<ffffffe000c34f8e>] show_stack+0x32/0x3e [224521.951830] [<ffffffe000c39020>] dump_stack_lvl+0x7e/0xa2 [224521.957317] [<ffffffe000c39058>] dump_stack+0x14/0x1c [224521.962459] [<ffffffe000243884>] dequeue_task_idle+0x2c/0x40 [224521.968207] [<ffffffe000c434f4>] __schedule+0x41e/0x5ea [224521.973520] [<ffffffe000c43826>] schedule+0x34/0xe4 [224521.978487] [<ffffffe000c46cae>] schedule_timeout+0xc6/0x170 [224521.984234] [<ffffffe000c4491e>] wait_for_completion+0x98/0xf2 [224521.990157] [<ffffffe00026d9e2>] __wait_rcu_gp+0x148/0x14a [224521.995733] [<ffffffe0002761c4>] synchronize_rcu+0x5c/0x66 [224522.001307] [<ffffffe00026f1a6>] rcu_sync_enter+0x54/0xe6 [224522.006795] [<ffffffe00025a436>] percpu_down_write+0x32/0x11c [224522.012629] [<ffffffe000c4266a>] _cpu_down+0x92/0x21a [224522.017771] [<ffffffe000219a0a>] smp_shutdown_nonboot_cpus+0x90/0x118 [224522.024299] [<ffffffe00020701e>] machine_crash_shutdown+0x30/0x4a [224522.030483] [<ffffffe00029a3f8>] __crash_kexec+0x62/0xa6 [224522.035884] [<ffffffe000c3515e>] panic+0xfa/0x2b6 [224522.040678] [<ffffffe0002772be>] rcu_sched_clock_irq+0xc26/0xcb8 [224522.046774] [<ffffffe00027fc7a>] update_process_times+0x62/0x8a [224522.052785] [<ffffffe00028d522>] tick_sched_timer+0x9e/0x102 [224522.058533] [<ffffffe000280c3a>] __hrtimer_run_queues+0x16a/0x318 [224522.064716] [<ffffffe0002812ec>] hrtimer_interrupt+0xd4/0x228 [224522.070551] [<ffffffe0009a69b6>] riscv_timer_interrupt+0x3c/0x48 [224522.076646] [<ffffffe000268f8c>] handle_percpu_devid_irq+0xb0/0x24c [224522.083004] [<ffffffe00026428e>] __handle_domain_irq+0xa8/0x122 [224522.089014] [<ffffffe00062f954>] riscv_intc_irq+0x38/0x60 [224522.094501] [<ffffffe000201bd4>] ret_from_exception+0x0/0xc [224522.100161] [<ffffffe000c42146>] rcu_eqs_enter.constprop.0+0x8c/0xb8 With the patch, it can enter crash system when RCU Stall occur. Fixes: e53d28180d4d ("RISC-V: Add kdump support") Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com> Link: https://lore.kernel.org/r/20220811074150.3020189-4-xianting.tian@linux.alibaba.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-11RISC-V: Fixup get incorrect user mode PC for kernel mode regsXianting Tian
When use 'echo c > /proc/sysrq-trigger' to trigger kdump, riscv_crash_save_regs() will be called to save regs for vmcore, we found "epc" value 00ffffffa5537400 is not a valid kernel virtual address, but is a user virtual address. Other regs(eg, ra, sp, gp...) are correct kernel virtual address. Actually 0x00ffffffb0dd9400 is the user mode PC of 'PID: 113 Comm: sh', which is saved in the task's stack. [ 21.201701] CPU: 0 PID: 113 Comm: sh Kdump: loaded Not tainted 5.18.9 #45 [ 21.201979] Hardware name: riscv-virtio,qemu (DT) [ 21.202160] epc : 00ffffffa5537400 ra : ffffffff80088640 sp : ff20000010333b90 [ 21.202435] gp : ffffffff810dde38 tp : ff6000000226c200 t0 : ffffffff8032be7c [ 21.202707] t1 : 0720072007200720 t2 : 30203a7375746174 s0 : ff20000010333cf0 [ 21.202973] s1 : 0000000000000000 a0 : ff20000010333b98 a1 : 0000000000000001 [ 21.203243] a2 : 0000000000000010 a3 : 0000000000000000 a4 : 28c8f0aeffea4e00 [ 21.203519] a5 : 28c8f0aeffea4e00 a6 : 0000000000000009 a7 : ffffffff8035c9b8 [ 21.203794] s2 : ffffffff810df0a8 s3 : ffffffff810df718 s4 : ff20000010333b98 [ 21.204062] s5 : 0000000000000000 s6 : 0000000000000007 s7 : ffffffff80c4a468 [ 21.204331] s8 : 00ffffffef451410 s9 : 0000000000000007 s10: 00aaaaaac0510700 [ 21.204606] s11: 0000000000000001 t3 : ff60000001218f00 t4 : ff60000001218f00 [ 21.204876] t5 : ff60000001218000 t6 : ff200000103338b8 [ 21.205079] status: 0000000200000020 badaddr: 0000000000000000 cause: 0000000000000008 With the incorrect PC, the backtrace showed by crash tool as below, the first stack frame is abnormal, crash> bt PID: 113 TASK: ff60000002269600 CPU: 0 COMMAND: "sh" #0 [ff2000001039bb90] __efistub_.Ldebug_info0 at 00ffffffa5537400 <-- Abnormal #1 [ff2000001039bcf0] panic at ffffffff806578ba #2 [ff2000001039bd50] sysrq_reset_seq_param_set at ffffffff8038c030 #3 [ff2000001039bda0] __handle_sysrq at ffffffff8038c5f8 #4 [ff2000001039be00] write_sysrq_trigger at ffffffff8038cad8 #5 [ff2000001039be20] proc_reg_write at ffffffff801b7edc #6 [ff2000001039be40] vfs_write at ffffffff80152ba6 #7 [ff2000001039be80] ksys_write at ffffffff80152ece #8 [ff2000001039bed0] sys_write at ffffffff80152f46 With the patch, we can get current kernel mode PC, the output as below, [ 17.607658] CPU: 0 PID: 113 Comm: sh Kdump: loaded Not tainted 5.18.9 #42 [ 17.607937] Hardware name: riscv-virtio,qemu (DT) [ 17.608150] epc : ffffffff800078f8 ra : ffffffff8008862c sp : ff20000010333b90 [ 17.608441] gp : ffffffff810dde38 tp : ff6000000226c200 t0 : ffffffff8032be68 [ 17.608741] t1 : 0720072007200720 t2 : 666666666666663c s0 : ff20000010333cf0 [ 17.609025] s1 : 0000000000000000 a0 : ff20000010333b98 a1 : 0000000000000001 [ 17.609320] a2 : 0000000000000010 a3 : 0000000000000000 a4 : 0000000000000000 [ 17.609601] a5 : ff60000001c78000 a6 : 000000000000003c a7 : ffffffff8035c9a4 [ 17.609894] s2 : ffffffff810df0a8 s3 : ffffffff810df718 s4 : ff20000010333b98 [ 17.610186] s5 : 0000000000000000 s6 : 0000000000000007 s7 : ffffffff80c4a468 [ 17.610469] s8 : 00ffffffca281410 s9 : 0000000000000007 s10: 00aaaaaab5bb6700 [ 17.610755] s11: 0000000000000001 t3 : ff60000001218f00 t4 : ff60000001218f00 [ 17.611041] t5 : ff60000001218000 t6 : ff20000010333988 [ 17.611255] status: 0000000200000020 badaddr: 0000000000000000 cause: 0000000000000008 With the correct PC, the backtrace showed by crash tool as below, crash> bt PID: 113 TASK: ff6000000226c200 CPU: 0 COMMAND: "sh" #0 [ff20000010333b90] riscv_crash_save_regs at ffffffff800078f8 <--- Normal #1 [ff20000010333cf0] panic at ffffffff806578c6 #2 [ff20000010333d50] sysrq_reset_seq_param_set at ffffffff8038c03c #3 [ff20000010333da0] __handle_sysrq at ffffffff8038c604 #4 [ff20000010333e00] write_sysrq_trigger at ffffffff8038cae4 #5 [ff20000010333e20] proc_reg_write at ffffffff801b7ee8 #6 [ff20000010333e40] vfs_write at ffffffff80152bb2 #7 [ff20000010333e80] ksys_write at ffffffff80152eda #8 [ff20000010333ed0] sys_write at ffffffff80152f52 Fixes: e53d28180d4d ("RISC-V: Add kdump support") Co-developed-by: Guo Ren <guoren@kernel.org> Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com> Link: https://lore.kernel.org/r/20220811074150.3020189-3-xianting.tian@linux.alibaba.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-11RISC-V: kexec: Fixup use of smp_processor_id() in preemptible contextXianting Tian
Use __smp_processor_id() to avoid check the preemption context when CONFIG_DEBUG_PREEMPT enabled, as we will enter crash kernel and no return. Without the patch, [ 103.781044] sysrq: Trigger a crash [ 103.784625] Kernel panic - not syncing: sysrq triggered crash [ 103.837634] CPU1: off [ 103.889668] CPU2: off [ 103.933479] CPU3: off [ 103.939424] Starting crashdump kernel... [ 103.943442] BUG: using smp_processor_id() in preemptible [00000000] code: sh/346 [ 103.950884] caller is debug_smp_processor_id+0x1c/0x26 [ 103.956051] CPU: 0 PID: 346 Comm: sh Kdump: loaded Not tainted 5.10.113-00002-gce03f03bf4ec-dirty #149 [ 103.965355] Call Trace: [ 103.967805] [<ffffffe00020372a>] walk_stackframe+0x0/0xa2 [ 103.973206] [<ffffffe000bcf1f4>] show_stack+0x32/0x3e [ 103.978258] [<ffffffe000bd382a>] dump_stack_lvl+0x72/0x8e [ 103.983655] [<ffffffe000bd385a>] dump_stack+0x14/0x1c [ 103.988705] [<ffffffe000bdc8fe>] check_preemption_disabled+0x9e/0xaa [ 103.995057] [<ffffffe000bdc926>] debug_smp_processor_id+0x1c/0x26 [ 104.001150] [<ffffffe000206c64>] machine_kexec+0x22/0xd0 [ 104.006463] [<ffffffe000291a7e>] __crash_kexec+0x6a/0xa4 [ 104.011774] [<ffffffe000bcf3fa>] panic+0xfc/0x2b0 [ 104.016480] [<ffffffe000656ca4>] sysrq_reset_seq_param_set+0x0/0x70 [ 104.022745] [<ffffffe000657310>] __handle_sysrq+0x8c/0x154 [ 104.028229] [<ffffffe0006577e8>] write_sysrq_trigger+0x5a/0x6a [ 104.034061] [<ffffffe0003d90e0>] proc_reg_write+0x58/0xd4 [ 104.039459] [<ffffffe00036cff4>] vfs_write+0x7e/0x254 [ 104.044509] [<ffffffe00036d2f6>] ksys_write+0x58/0xbe [ 104.049558] [<ffffffe00036d36a>] sys_write+0xe/0x16 [ 104.054434] [<ffffffe000201b9a>] ret_from_syscall+0x0/0x2 [ 104.067863] Will call new kernel at ecc00000 from hart id 0 [ 104.074939] FDT image at fc5ee000 [ 104.079523] Bye... With the patch we can got clear output, [ 67.740553] sysrq: Trigger a crash [ 67.744166] Kernel panic - not syncing: sysrq triggered crash [ 67.809123] CPU1: off [ 67.865210] CPU2: off [ 67.909075] CPU3: off [ 67.919123] Starting crashdump kernel... [ 67.924900] Will call new kernel at ecc00000 from hart id 0 [ 67.932045] FDT image at fc5ee000 [ 67.935560] Bye... Fixes: 0e105f1d0037 ("riscv: use hart id instead of cpu id on machine_kexec") Reviewed-by: Guo Ren <guoren@kernel.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Atish Patra <atishp@rivosinc.com> Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com> Link: https://lore.kernel.org/r/20220811074150.3020189-2-xianting.tian@linux.alibaba.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-11arch/riscv: add Zihintpause supportDao Lu
Implement support for the ZiHintPause extension. The PAUSE instruction is a HINT that indicates the current hart’s rate of instruction retirement should be temporarily reduced or paused. Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dao Lu <daolu@rivosinc.com> [Palmer: Some minor merge conflicts.] Link: https://lore.kernel.org/all/20220620201530.3929352-1-daolu@rivosinc.com/ Link: https://lore.kernel.org/all/20220811053356.17375-1-palmer@rivosinc.com/ Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-10riscv: implement Zicbom-based CMO instructions + the t-head variantPalmer Dabbelt
This series is based on the alternatives changes done in my svpbmt series and thus also depends on Atish's isa-extension parsing series. It implements using the cache-management instructions from the Zicbom- extension to handle cache flush, etc actions on platforms needing them. SoCs using cpu cores from T-Head like the Allwinne D1 implement a different set of cache instructions. But while they are different, instructions they provide the same functionality, so a variant can easly hook into the existing alternatives mechanism on those. [Palmer: Some minor fixups, including a RISCV_ISA_ZICBOM dependency on MMU that's probably not strictly necessary. The Zicbom support will trip up sparse for users that have new toolchains, I just sent a patch.] Link: https://lore.kernel.org/all/20220706231536.2041855-1-heiko@sntech.de/ Link: https://lore.kernel.org/linux-sparse/20220811033138.20676-1-palmer@rivosinc.com/T/#u * palmer/riscv-zicbom: riscv: implement cache-management errata for T-Head SoCs riscv: Add support for non-coherent devices using zicbom extension dt-bindings: riscv: document cbom-block-size of: also handle dma-noncoherent in of_dma_is_coherent()
2022-08-07Merge tag 'mm-nonmm-stable-2022-08-06-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc updates from Andrew Morton: "Updates to various subsystems which I help look after. lib, ocfs2, fatfs, autofs, squashfs, procfs, etc. A relatively small amount of material this time" * tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits) scripts/gdb: ensure the absolute path is generated on initial source MAINTAINERS: kunit: add David Gow as a maintainer of KUnit mailmap: add linux.dev alias for Brendan Higgins mailmap: update Kirill's email profile: setup_profiling_timer() is moslty not implemented ocfs2: fix a typo in a comment ocfs2: use the bitmap API to simplify code ocfs2: remove some useless functions lib/mpi: fix typo 'the the' in comment proc: add some (hopefully) insightful comments bdi: remove enum wb_congested_state kernel/hung_task: fix address space of proc_dohung_task_timeout_secs lib/lzo/lzo1x_compress.c: replace ternary operator with min() and min_t() squashfs: support reading fragments in readahead call squashfs: implement readahead squashfs: always build "file direct" version of page actor Revert "squashfs: provide backing_dev_info in order to disable read-ahead" fs/ocfs2: Fix spelling typo in comment ia64: old_rr4 added under CONFIG_HUGETLB_PAGE proc: fix test for "vsyscall=xonly" boot option ...
2022-08-06Merge tag 'riscv-for-linus-5.20-mw0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: - Enabling the FPU is now a static_key - Improvements to the Svpbmt support - CPU topology bindings for a handful of systems - Support for systems with 64-bit hart IDs - Many settings have been enabled in the defconfig, including both support for the StarFive systems and many of the Docker requirements There are also a handful of cleanups and improvements, as usual. * tag 'riscv-for-linus-5.20-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (28 commits) riscv: enable Docker requirements in defconfig riscv: convert the t-head pbmt errata to use the __nops macro riscv: introduce nops and __nops macros for NOP sequences RISC-V: Add fast call path of crash_kexec() riscv: mmap with PROT_WRITE but no PROT_READ is invalid riscv/efi_stub: Add 64bit boot-hartid support on RV64 riscv: cpu: Add 64bit hartid support on RV64 riscv: smp: Add 64bit hartid support on RV64 riscv: spinwait: Fix hartid variable type riscv: cpu_ops_sbi: Add 64bit hartid support on RV64 riscv: dts: sifive: "fix" pmic watchdog node name riscv: dts: canaan: Add k210 topology information riscv: dts: sifive: Add fu740 topology information riscv: dts: sifive: Add fu540 topology information riscv: dts: starfive: Add JH7100 CPU topology RISC-V: Add CONFIG_{NON,}PORTABLE riscv: config: enable SOC_STARFIVE in defconfig riscv: dts: microchip: Add mpfs' topology information riscv: Kconfig.socs: Add comments riscv: Kconfig.erratas: Add comments ...
2022-08-02Merge tag 'rcu.2022.07.26a' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU updates from Paul McKenney: - Documentation updates - Miscellaneous fixes - Callback-offload updates, perhaps most notably a new RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to be offloaded at boot time, regardless of kernel boot parameters. This is useful to battery-powered systems such as ChromeOS and Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel boot parameter prevents offloaded callbacks from interfering with real-time workloads and with energy-efficiency mechanisms - Polled grace-period updates, perhaps most notably making these APIs account for both normal and expedited grace periods - Tasks RCU updates, perhaps most notably reducing the CPU overhead of RCU tasks trace grace periods by more than a factor of two on a system with 15,000 tasks. The reduction is expected to increase with the number of tasks, so it seems reasonable to hypothesize that a system with 150,000 tasks might see a 20-fold reduction in CPU overhead - Torture-test updates - Updates that merge RCU's dyntick-idle tracking into context tracking, thus reducing the overhead of transitioning to kernel mode from either idle or nohz_full userspace execution for kernels that track context independently of RCU. This is expected to be helpful primarily for kernels built with CONFIG_NO_HZ_FULL=y * tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (98 commits) rcu: Add irqs-disabled indicator to expedited RCU CPU stall warnings rcu: Diagnose extended sync_rcu_do_polled_gp() loops rcu: Put panic_on_rcu_stall() after expedited RCU CPU stall warnings rcutorture: Test polled expedited grace-period primitives rcu: Add polled expedited grace-period primitives rcutorture: Verify that polled GP API sees synchronous grace periods rcu: Make Tiny RCU grace periods visible to polled APIs rcu: Make polled grace-period API account for expedited grace periods rcu: Switch polled grace-period APIs to ->gp_seq_polled rcu/nocb: Avoid polling when my_rdp->nocb_head_rdp list is empty rcu/nocb: Add option to opt rcuo kthreads out of RT priority rcu: Add nocb_cb_kthread check to rcu_is_callbacks_kthread() rcu/nocb: Add an option to offload all CPUs on boot rcu/nocb: Fix NOCB kthreads spawn failure with rcu_nocb_rdp_deoffload() direct call rcu/nocb: Invert rcu_state.barrier_mutex VS hotplug lock locking order rcu/nocb: Add/del rdp to iterate from rcuog itself rcu/tree: Add comment to describe GP-done condition in fqs loop rcu: Initialize first_gp_fqs at declaration in rcu_gp_fqs() rcu/kvfree: Remove useless monitor_todo flag rcu: Cleanup RCU urgency state for offline CPU ...
2022-08-01Merge tag 'locking-core-2022-08-01' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "This was a fairly quiet cycle for the locking subsystem: - lockdep: Fix a handful of the more complex lockdep_init_map_*() primitives that can lose the lock_type & cause false reports. No such mishap was observed in the wild. - jump_label improvements: simplify the cross-arch support of initial NOP patching by making it arch-specific code (used on MIPS only), and remove the s390 initial NOP patching that was superfluous" * tag 'locking-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/lockdep: Fix lockdep_init_map_*() confusion jump_label: make initial NOP patching the special case jump_label: mips: move module NOP patching into arch code jump_label: s390: avoid pointless initial NOP patching
2022-07-29profile: setup_profiling_timer() is moslty not implementedBen Dooks
The setup_profiling_timer() is mostly un-implemented by many architectures. In many places it isn't guarded by CONFIG_PROFILE which is needed for it to be used. Make it a weak symbol in kernel/profile.c and remove the 'return -EINVAL' implementations from the kenrel. There are a couple of architectures which do return 0 from the setup_profiling_timer() function but they don't seem to do anything else with it. To keep the /proc compatibility for now, leave these for a future update or removal. On ARM, this fixes the following sparse warning: arch/arm/kernel/smp.c:793:5: warning: symbol 'setup_profiling_timer' was not declared. Should it be static? Link: https://lkml.kernel.org/r/20220721195509.418205-1-ben-linux@fluff.org Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-28riscv: Add support for non-coherent devices using zicbom extensionHeiko Stuebner
The Zicbom ISA-extension was ratified in november 2021 and introduces instructions for dcache invalidate, clean and flush operations. Implement cache management operations for non-coherent devices based on them. Of course not all cores will support this, so implement an alternative-based mechanism that replaces empty instructions with ones done around Zicbom instructions. As discussed in previous versions, assume the platform being coherent by default so that non-coherent devices need to get marked accordingly by firmware. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/20220706231536.2041855-4-heiko@sntech.de Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-07-21RISC-V: Add fast call path of crash_kexec()Xianting Tian
Currently, almost all archs (x86, arm64, mips...) support fast call of crash_kexec() when "regs && kexec_should_crash()" is true. But RISC-V not, it can only enter crash system via panic(). However panic() doesn't pass the regs of the real accident scene to crash_kexec(), it caused we can't get accurate backtrace via gdb, $ riscv64-linux-gnu-gdb vmlinux vmcore Reading symbols from vmlinux... [New LWP 95] #0 console_unlock () at kernel/printk/printk.c:2557 2557 if (do_cond_resched) (gdb) bt #0 console_unlock () at kernel/printk/printk.c:2557 #1 0x0000000000000000 in ?? () With the patch we can get the accurate backtrace, $ riscv64-linux-gnu-gdb vmlinux vmcore Reading symbols from vmlinux... [New LWP 95] #0 0xffffffe00063a4e0 in test_thread (data=<optimized out>) at drivers/test_crash.c:81 81 *(int *)p = 0xdead; (gdb) (gdb) bt #0 0xffffffe00064d5c0 in test_thread (data=<optimized out>) at drivers/test_crash.c:81 #1 0x0000000000000000 in ?? () Test code to produce NULL address dereference in test_crash.c, void *p = NULL; *(int *)p = 0xdead; Reviewed-by: Guo Ren <guoren@kernel.org> Tested-by: Xianting Tian <xianting.tian@linux.alibaba.com> Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com> Link: https://lore.kernel.org/r/20220606082308.2883458-1-xianting.tian@linux.alibaba.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-07-21riscv: mmap with PROT_WRITE but no PROT_READ is invalidCeleste Liu
As mentioned in Table 4.5 in RISC-V spec Volume 2 Section 4.3, write but not read is "Reserved for future use.". For now, they are not valid. In the current code, -wx is marked as invalid, but -w- is not marked as invalid. This patch refines that judgment. Reported-by: xctan <xc-tan@outlook.com> Co-developed-by: dram <dramforever@live.com> Signed-off-by: dram <dramforever@live.com> Co-developed-by: Ruizhe Pan <c141028@gmail.com> Signed-off-by: Ruizhe Pan <c141028@gmail.com> Signed-off-by: Celeste Liu <coelacanthus@outlook.com> Link: https://lore.kernel.org/r/PH7PR14MB559464DBDD310E755F5B21E8CEDC9@PH7PR14MB5594.namprd14.prod.outlook.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-07-19RISC-V: Support for 64bit hartid on RV64 platformsPalmer Dabbelt
The hartid can be a 64bit value on RV64 platforms. This series updates the code so that 64bit hartid can be supported on RV64 platforms. * 'riscv-64bit_hartid' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux.git: riscv/efi_stub: Add 64bit boot-hartid support on RV64 riscv: cpu: Add 64bit hartid support on RV64 riscv: smp: Add 64bit hartid support on RV64 riscv: spinwait: Fix hartid variable type riscv: cpu_ops_sbi: Add 64bit hartid support on RV64
2022-07-19riscv: cpu: Add 64bit hartid support on RV64Sunil V L
The hartid can be a 64bit value on RV64 platforms. Add support for 64bit hartid in riscv_of_processor_hartid() and update its callers. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Link: https://lore.kernel.org/r/20220527051743.2829940-5-sunilvl@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-07-19riscv: smp: Add 64bit hartid support on RV64Sunil V L
The hartid can be a 64bit value on RV64 platforms. Modify the hartid parameter in riscv_hartid_to_cpuid() as unsigned long so that it can hold 64bit value on RV64 platforms. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Link: https://lore.kernel.org/r/20220527051743.2829940-4-sunilvl@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-07-19riscv: spinwait: Fix hartid variable typeSunil V L
The hartid variable is of type int but compared with ULONG_MAX(INVALID_HARTID). This issue is fixed by changing the hartid variable type to unsigned long. Fixes: c78f94f35cf6 ("RISC-V: Use __cpu_up_stack/task_pointer only for spinwait method") Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Link: https://lore.kernel.org/r/20220527051743.2829940-3-sunilvl@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-07-19riscv: cpu_ops_sbi: Add 64bit hartid support on RV64Sunil V L
The hartid can be a 64bit value on RV64 platforms. Modify the hartid variable type to unsigned long so that it can hold 64bit value on RV64 platforms. Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Link: https://lore.kernel.org/r/20220527051743.2829940-2-sunilvl@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-07-14RISC-V: kexec: Fix build error without CONFIG_KEXECLi Zhengyu
When CONFIG_KEXEC_FILE=y but CONFIG_KEXEC is not set: kernel/kexec_core.o: In function `kimage_free': kexec_core.c:(.text+0xa0c): undefined reference to `machine_kexec_cleanup' kernel/kexec_core.o: In function `.L0 ': kexec_core.c:(.text+0xde8): undefined reference to `machine_crash_shutdown' kexec_core.c:(.text+0xdf4): undefined reference to `machine_kexec' kernel/kexec_core.o: In function `.L231': kexec_core.c:(.text+0xe1c): undefined reference to `riscv_crash_save_regs' kernel/kexec_core.o: In function `.L0 ': kexec_core.c:(.text+0x119e): undefined reference to `machine_shutdown' kernel/kexec_core.o: In function `.L312': kexec_core.c:(.text+0x11b2): undefined reference to `machine_kexec' kernel/kexec_file.o: In function `.L0 ': kexec_file.c:(.text+0xb84): undefined reference to `machine_kexec_prepare' kernel/kexec_file.o: In function `.L177': kexec_file.c:(.text+0xc5a): undefined reference to `machine_kexec_prepare' Makefile:1160: recipe for target 'vmlinux' failed make: *** [vmlinux] Error 1 These symbols should depend on CONFIG_KEXEC_CORE rather than CONFIG_KEXEC when kexec_file has been implemented on RISC-V, like the other archs have done. Signed-off-by: Li Zhengyu <lizhengyu3@huawei.com> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20220601070204.26882-1-lizhengyu3@huawei.com Fixes: 6261586e0c91 ("RISC-V: Add kexec_file support") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-07-14RISCV: kexec: Fix build error without CONFIG_MODULESLi Zhengyu
When CONFIG_MODULES is not set/enabled: ../arch/riscv/kernel/elf_kexec.c:353:9: error: unknown type name 'Elf_Rela'; did you mean 'Elf64_Rela'? 353 | Elf_Rela *relas; | ^~~~~~~~ | Elf64_Rela Replace Elf_Rela by Elf64_Rela to avoid relying on CONFIG_MODULES. Signed-off-by: Li Zhengyu <lizhengyu3@huawei.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20220601063924.13037-1-lizhengyu3@huawei.com Fixes: 838b3e28488f ("RISC-V: Load purgatory in kexec_file") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-06-29context_tracking: Split user tracking KconfigFrederic Weisbecker
Context tracking is going to be used not only to track user transitions but also idle/IRQs/NMIs. The user tracking part will then become a separate feature. Prepare Kconfig for that. [ frederic: Apply Max Filippov feedback. ] Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com> Cc: Uladzislau Rezki <uladzislau.rezki@sony.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Nicolas Saenz Julienne <nsaenz@kernel.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com> Cc: Yu Liao <liaoyu15@huawei.com> Cc: Phil Auld <pauld@redhat.com> Cc: Paul Gortmaker<paul.gortmaker@windriver.com> Cc: Alex Belits <abelits@marvell.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com> Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
2022-06-29context_tracking: Rename context_tracking_user_enter/exit() to ↵Frederic Weisbecker
user_enter/exit_callable() context_tracking_user_enter() and context_tracking_user_exit() are ASM callable versions of user_enter() and user_exit() for architectures that didn't manage to check the context tracking static key from ASM. Change those function names to better reflect their purpose. [ frederic: Apply Max Filippov feedback. ] Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com> Cc: Uladzislau Rezki <uladzislau.rezki@sony.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Nicolas Saenz Julienne <nsaenz@kernel.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com> Cc: Yu Liao <liaoyu15@huawei.com> Cc: Phil Auld <pauld@redhat.com> Cc: Paul Gortmaker<paul.gortmaker@windriver.com> Cc: Alex Belits <abelits@marvell.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com> Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
2022-06-24jump_label: make initial NOP patching the special caseArd Biesheuvel
Instead of defaulting to patching NOP opcodes at init time, and leaving it to the architectures to override this if this is not needed, switch to a model where doing nothing is the default. This is the common case by far, as only MIPS requires NOP patching at init time. On all other architectures, the correct encodings are emitted by the compiler and so no initial patching is needed. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220615154142.1574619-4-ardb@kernel.org
2022-06-16RISC-V: Some Svpbmt fixes and cleanupsPalmer Dabbelt
Some additionals comments and notes from autobuilders received after the series got applied, warranted some changes. * 'riscv-svpbmt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/palmer/linux: riscv: remove usage of function-pointers from cpufeatures and t-head errata riscv: make patch-function pointer more generic in cpu_manufacturer_info struct riscv: Improve description for RISCV_ISA_SVPBMT Kconfig symbol riscv: drop cpufeature_apply_feature tracking variable riscv: fix dependency for t-head errata
2022-06-16riscv: remove usage of function-pointers from cpufeatures and t-head errataHeiko Stuebner
Having a list of alternatives to check with a per-entry function pointer to a check function is nice style-wise. But in case of early-alternatives it can clash with the non-relocated kernel and the function pointer in the list pointing to a completely wrong location. This isn't an issue with one or two list entries, as in that case the compiler seems to unroll the loop and even usage of the list structure and then only does relative jumps into the check functions based on this. When adding a third entry to either list though, the issue that was hiding there from the beginning is triggered resulting a jump to a memory address that isn't part of the kernel at all. The list of features/erratas only contained an unused name and the pointer to the check function, so an easy solution for the problem is to just unroll the loop in code, dismantle the whole list structure and just call the relevant check functions one by one ourself. For the T-Head errata this includes moving the stage-check inside the check functions. The issue is only relevant for things that might be called for early- alternatives (T-Head and possible future main extensions), so the SiFive erratas were not affected from the beginning, as they got an early return for early-alternatives in the original patchset. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20220526205646.258337-6-heiko@sntech.de Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-06-16riscv: make patch-function pointer more generic in cpu_manufacturer_info structHeiko Stuebner
During review the naming of the function-pointer was called confusing as the vendor id is just one of three inputs for the patching and indeed it serves no real purpose, as with recent changes the function pointer is not a static global element anymore, so drop the "vendor_" prefix. Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20220526205646.258337-4-heiko@sntech.de Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-06-16riscv: drop cpufeature_apply_feature tracking variableHeiko Stuebner
The variable was tracking which feature patches got applied but that information was never actually used - and thus resulted in a warning as well. Drop the variable. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/20220526205646.258337-2-heiko@sntech.de Fixes: ff689fd21cb1 ("riscv: add RISC-V Svpbmt extension support") Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-06-16riscv: switch has_fpu() to the unified static key mechanismJisheng Zhang
This is to use the unified static key mechanism instead of putting static key related here and there. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Atish Patra <atishp@rivosinc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Link: https://lore.kernel.org/r/20220522153543.2656-3-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-06-16riscv: introduce unified static key mechanism for ISA extensionsJisheng Zhang
Currently, riscv has several extensions which may not be supported on all riscv platforms, for example, FPU and so on. To support unified kernel Image style, we need to check whether the feature is supported or not. If the check sits at hot code path, then performance will be impacted a lot. static key can be used to solve the issue. In the past, FPU support has been converted to use static key mechanism. I believe we will have similar cases in the future. This patch tries to add an unified mechanism to use static keys for some ISA extensions by implementing an array of default-false static keys and enabling them when detected. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Atish Patra <atishp@rivosinc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Link: https://lore.kernel.org/r/20220522153543.2656-2-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-06-04Merge tag 'bitmap-for-5.19-rc1' of https://github.com/norov/linuxLinus Torvalds
Pull bitmap updates from Yury Norov: - bitmap: optimize bitmap_weight() usage, from me - lib/bitmap.c make bitmap_print_bitmask_to_buf parseable, from Mauro Carvalho Chehab - include/linux/find: Fix documentation, from Anna-Maria Behnsen - bitmap: fix conversion from/to fix-sized arrays, from me - bitmap: Fix return values to be unsigned, from Kees Cook It has been in linux-next for at least a week with no problems. * tag 'bitmap-for-5.19-rc1' of https://github.com/norov/linux: (31 commits) nodemask: Fix return values to be unsigned bitmap: Fix return values to be unsigned KVM: x86: hyper-v: replace bitmap_weight() with hweight64() KVM: x86: hyper-v: fix type of valid_bank_mask ia64: cleanup remove_siblinginfo() drm/amd/pm: use bitmap_{from,to}_arr32 where appropriate KVM: s390: replace bitmap_copy with bitmap_{from,to}_arr64 where appropriate lib/bitmap: add test for bitmap_{from,to}_arr64 lib: add bitmap_{from,to}_arr64 lib/bitmap: extend comment for bitmap_(from,to)_arr32() include/linux/find: Fix documentation lib/bitmap.c make bitmap_print_bitmask_to_buf parseable MAINTAINERS: add cpumask and nodemask files to BITMAP_API arch/x86: replace nodes_weight with nodes_empty where appropriate mm/vmstat: replace cpumask_weight with cpumask_empty where appropriate clocksource: replace cpumask_weight with cpumask_empty in clocksource.c genirq/affinity: replace cpumask_weight with cpumask_empty where appropriate irq: mips: replace cpumask_weight with cpumask_empty where appropriate drm/i915/pmu: replace cpumask_weight with cpumask_empty where appropriate arch/x86: replace cpumask_weight with cpumask_empty where appropriate ...
2022-06-03Merge tag 'kthread-cleanups-for-v5.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull kthread updates from Eric Biederman: "This updates init and user mode helper tasks to be ordinary user mode tasks. Commit 40966e316f86 ("kthread: Ensure struct kthread is present for all kthreads") caused init and the user mode helper threads that call kernel_execve to have struct kthread allocated for them. This struct kthread going away during execve in turned made a use after free of struct kthread possible. Here, commit 343f4c49f243 ("kthread: Don't allocate kthread_struct for init and umh") is enough to fix the use after free and is simple enough to be backportable. The rest of the changes pass struct kernel_clone_args to clean things up and cause the code to make sense. In making init and the user mode helpers tasks purely user mode tasks I ran into two complications. The function task_tick_numa was detecting tasks without an mm by testing for the presence of PF_KTHREAD. The initramfs code in populate_initrd_image was using flush_delayed_fput to ensuere the closing of all it's file descriptors was complete, and flush_delayed_fput does not work in a userspace thread. I have looked and looked and more complications and in my code review I have not found any, and neither has anyone else with the code sitting in linux-next" * tag 'kthread-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: sched: Update task_tick_numa to ignore tasks without an mm fork: Stop allowing kthreads to call execve fork: Explicitly set PF_KTHREAD init: Deal with the init process being a user mode process fork: Generalize PF_IO_WORKER handling fork: Explicity test for idle tasks in copy_thread fork: Pass struct kernel_clone_args into copy_thread kthread: Don't allocate kthread_struct for init and umh
2022-06-03Merge tag 'riscv-for-linus-5.19-mw2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: "This is mostly some DT updates, but also a handful of cleanups and some fixes. The most user-visible of those are: - A device tree for the Sundance Polarberry, along with a handful of fixes and clenups to the PolarFire SOC device trees and bindings. - The memfd_secret syscall number is now visible to userspace, - Some improvements to the vm layout dump, which really should have followed shortly after the sv48 patches but I missed" * tag 'riscv-for-linus-5.19-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Move alternative length validation into subsection riscv: mm: init: make pt_ops_set_[early|late|fixmap] static riscv: move errata/ and kvm/ builds to arch/riscv/Kbuild RISC-V: Mark IORESOURCE_EXCLUSIVE for reserved mem instead of IORESOURCE_BUSY riscv: Wire up memfd_secret in UAPI header riscv: Fix irq_work when SMP is disabled riscv: Improve virtual kernel memory layout dump riscv: Initialize thread pointer before calling C functions Documentation: riscv: Add sv48 description to VM layout RISC-V: Only default to spinwait on SBI-0.1 and M-mode riscv: dts: icicle: sort nodes alphabetically riscv: microchip: icicle: readability fixes riscv: dts: microchip: add the sundance polarberry dt-bindings: riscv: microchip: add polarberry compatible string dt-bindings: vendor-prefixes: add Sundance DSP riscv: dts: microchip: make the fabric dtsi board specific dt-bindings: riscv: microchip: document icicle reference design riscv: dts: microchip: remove soc vendor from filenames riscv: dts: microchip: move sysctrlr out of soc bus riscv: dts: microchip: remove icicle memory clocks
2022-06-03Merge tag 'efi-next-for-v5.19-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull more EFI updates from Ard Biesheuvel: "Follow-up tweaks for EFI changes - they mostly address issues introduced this merge window, except for Heinrich's patch: - fix new DXE service invocations for mixed mode - use correct Kconfig symbol when setting PE header flag - clean up the drivers/firmware/efi Kconfig dependencies so that features that depend on CONFIG_EFI are hidden from the UI when the symbol is not enabled. Also included is a RISC-V bugfix from Heinrich to avoid read-write mappings of read-only firmware regions in the EFI page tables" * tag 'efi-next-for-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: clean up Kconfig dependencies on CONFIG_EFI efi/x86: libstub: Make DXE calls mixed mode safe efi: x86: Fix config name for setting the NX-compatibility flag in the PE header riscv: read-only pages should not be writable
2022-06-03risc-v: replace bitmap_weight with bitmap_empty in riscv_fill_hwcap()Yury Norov
bitmap_empty() is better than bitmap_weight() because it may return earlier, and improves on readability. CC: Albert Ou <aou@eecs.berkeley.edu> CC: Anup Patel <anup@brainfault.org> CC: Atish Patra <atishp@atishpatra.org> CC: Jisheng Zhang <jszhang@kernel.org> CC: Palmer Dabbelt <palmer@dabbelt.com> CC: Paul Walmsley <paul.walmsley@sifive.com> CC: Tsukasa OI <research_trasio@irq.a4lg.com> CC: linux-riscv@lists.infradead.org CC: linux-kernel@vger.kernel.org Signed-off-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Anup Patel <anup@brainfault.org>
2022-06-01RISC-V: Mark IORESOURCE_EXCLUSIVE for reserved mem instead of IORESOURCE_BUSYXianting Tian
Commit 00ab027a3b82 ("RISC-V: Add kernel image sections to the resource tree") marked IORESOURCE_BUSY for reserved memory, which caused resource map failed in subsequent operations of related driver, so remove the IORESOURCE_BUSY flag. In order to prohibit userland mapping reserved memory, mark IORESOURCE_EXCLUSIVE for it. The code to reproduce the issue, dts: mem0: memory@a0000000 { reg = <0x0 0xa0000000 0 0x1000000>; no-map; }; &test { status = "okay"; memory-region = <&mem0>; }; code: np = of_parse_phandle(pdev->dev.of_node, "memory-region", 0); ret = of_address_to_resource(np, 0, &r); base = devm_ioremap_resource(&pdev->dev, &r); // base = -EBUSY Fixes: 00ab027a3b82 ("RISC-V: Add kernel image sections to the resource tree") Reported-by: Huaming Jiang <jianghuaming.jhm@alibaba-inc.com> Reviewed-by: Guo Ren <guoren@kernel.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Co-developed-by: Nick Kossifidis <mick@ics.forth.gr> Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com> Link: https://lore.kernel.org/r/20220518013428.1338983-1-xianting.tian@linux.alibaba.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-06-01riscv: Initialize thread pointer before calling C functionsAlexandre Ghiti
Because of the stack canary feature that reads from the current task structure the stack canary value, the thread pointer register "tp" must be set before calling any C function from head.S: by chance, setup_vm and all the functions that it calls does not seem to be part of the functions where the canary check is done, but in the following commits, some functions will. Fixes: f2c9699f65557a31 ("riscv: Add STACKPROTECTOR supported") Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-05-31Merge tag 'riscv-for-linus-5.19-mw0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: - Support for the Svpbmt extension, which allows memory attributes to be encoded in pages - Support for the Allwinner D1's implementation of page-based memory attributes - Support for running rv32 binaries on rv64 systems, via the compat subsystem - Support for kexec_file() - Support for the new generic ticket-based spinlocks, which allows us to also move to qrwlock. These should have already gone in through the asm-geneic tree as well - A handful of cleanups and fixes, include some larger ones around atomics and XIP * tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits) RISC-V: Prepare dropping week attribute from arch_kexec_apply_relocations[_add] riscv: compat: Using seperated vdso_maps for compat_vdso_info RISC-V: Fix the XIP build RISC-V: Split out the XIP fixups into their own file RISC-V: ignore xipImage RISC-V: Avoid empty create_*_mapping definitions riscv: Don't output a bogus mmu-type on a no MMU kernel riscv: atomic: Add custom conditional atomic operation implementation riscv: atomic: Optimize dec_if_positive functions riscv: atomic: Cleanup unnecessary definition RISC-V: Load purgatory in kexec_file RISC-V: Add purgatory RISC-V: Support for kexec_file on panic RISC-V: Add kexec_file support RISC-V: use memcpy for kexec_file mode kexec_file: Fix kexec_file.c build error for riscv platform riscv: compat: Add COMPAT Kbuild skeletal support riscv: compat: ptrace: Add compat_arch_ptrace implement riscv: compat: signal: Add rt_frame implementation riscv: add memory-type errata for T-Head ...
2022-05-30Merge tag 'pm-5.19-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These update the ARM cpufreq drivers and fix up the CPPC cpufreq driver after recent changes, update the OPP code and PM documentation and add power sequences support to the system reboot and power off code. Specifics: - Add Tegra234 cpufreq support (Sumit Gupta) - Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing, Rex-BC Chen, and Jia-Wei Chang) - Fix up the CPPC cpufreq driver after recent changes (Zheng Bin, Pierre Gondois) - Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine Oudjana) - Use list iterator only inside the list_for_each_entry loop (Xiaomeng Tong, and Jakob Koschel) - New APIs related to finding OPP based on interconnect bandwidth (Krzysztof Kozlowski) - Fix the missing of_node_put() in _bandwidth_supported() (Dan Carpenter) - Cleanups (Krzysztof Kozlowski, and Viresh Kumar) - Add Out of Band mode description to the intel-speed-select utility documentation (Srinivas Pandruvada) - Add power sequences support to the system reboot and power off code and make related platform-specific changes for multiple platforms (Dmitry Osipenko, Geert Uytterhoeven)" * tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (60 commits) cpufreq: CPPC: Fix unused-function warning cpufreq: CPPC: Fix build error without CONFIG_ACPI_CPPC_CPUFREQ_FIE Documentation: admin-guide: PM: Add Out of Band mode kernel/reboot: Change registration order of legacy power-off handler m68k: virt: Switch to new sys-off handler API kernel/reboot: Add devm_register_restart_handler() kernel/reboot: Add devm_register_power_off_handler() soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly reboot: Remove pm_power_off_prepare() regulator: pfuze100: Use devm_register_sys_off_handler() ACPI: power: Switch to sys-off handler API memory: emif: Use kernel_can_power_off() mips: Use do_kernel_power_off() ia64: Use do_kernel_power_off() x86: Use do_kernel_power_off() sh: Use do_kernel_power_off() m68k: Switch to new sys-off handler API powerpc: Use do_kernel_power_off() xen/x86: Use do_kernel_power_off() parisc: Use do_kernel_power_off() ...
2022-05-29Merge tag 'trace-v5.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "The majority of the changes are for fixes and clean ups. Notable changes: - Rework trace event triggers code to be easier to interact with. - Support for embedding bootconfig with the kernel (as suppose to having it embedded in initram). This is useful for embedded boards without initram disks. - Speed up boot by parallelizing the creation of tracefs files. - Allow absolute ring buffer timestamps handle timestamps that use more than 59 bits. - Added new tracing clock "TAI" (International Atomic Time) - Have weak functions show up in available_filter_function list as: __ftrace_invalid_address___<invalid-offset> instead of using the name of the function before it" * tag 'trace-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (52 commits) ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to avoid adding weak function tracing: Fix comments for event_trigger_separate_filter() x86/traceponit: Fix comment about irq vector tracepoints x86,tracing: Remove unused headers ftrace: Clean up hash direct_functions on register failures tracing: Fix comments of create_filter() tracing: Disable kcov on trace_preemptirq.c tracing: Initialize integer variable to prevent garbage return value ftrace: Fix typo in comment ftrace: Remove return value of ftrace_arch_modify_*() tracing: Cleanup code by removing init "char *name" tracing: Change "char *" string form to "char []" tracing/timerlat: Do not wakeup the thread if the trace stops at the IRQ tracing/timerlat: Print stacktrace in the IRQ handler if needed tracing/timerlat: Notify IRQ new max latency only if stop tracing is set kprobes: Fix build errors with CONFIG_KRETPROBES=n tracing: Fix return value of trace_pid_write() tracing: Fix potential double free in create_var_ref() tracing: Use strim() to remove whitespace instead of doing it manually ftrace: Deal with error return code of the ftrace_process_locs() function ...
2022-05-28riscv: read-only pages should not be writableHeinrich Schuchardt
If EFI pages are marked as read-only, we should remove the _PAGE_WRITE flag. The current code overwrites an unused value. Fixes: b91540d52a08b ("RISC-V: Add EFI runtime services") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Link: https://lore.kernel.org/r/20220528014132.91052-1-heinrich.schuchardt@canonical.com Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2022-05-27Merge tag 'mm-nonmm-stable-2022-05-26' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc updates from Andrew Morton: "The non-MM patch queue for this merge window. Not a lot of material this cycle. Many singleton patches against various subsystems. Most notably some maintenance work in ocfs2 and initramfs" * tag 'mm-nonmm-stable-2022-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (65 commits) kcov: update pos before writing pc in trace function ocfs2: dlmfs: fix error handling of user_dlm_destroy_lock ocfs2: dlmfs: don't clear USER_LOCK_ATTACHED when destroying lock fs/ntfs: remove redundant variable idx fat: remove time truncations in vfat_create/vfat_mkdir fat: report creation time in statx fat: ignore ctime updates, and keep ctime identical to mtime in memory fat: split fat_truncate_time() into separate functions MAINTAINERS: add Muchun as a memcg reviewer proc/sysctl: make protected_* world readable ia64: mca: drop redundant spinlock initialization tty: fix deadlock caused by calling printk() under tty_port->lock relay: remove redundant assignment to pointer buf fs/ntfs3: validate BOOT sectors_per_clusters lib/string_helpers: fix not adding strarray to device's resource list kernel/crash_core.c: remove redundant check of ck_cmdline ELF, uapi: fixup ELF_ST_TYPE definition ipc/mqueue: use get_tree_nodev() in mqueue_get_tree() ipc: update semtimedop() to use hrtimer ipc/sem: remove redundant assignments ...
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-25 14:07:45 +0000