summaryrefslogtreecommitdiff
path: root/drivers/clk/renesas/renesas-cpg-mssr.c
AgeCommit message (Collapse)Author
2022-04-29clk: renesas: cpg-mssr: Add support for R-Car V4HYoshihiro Shimoda
Initial CPG support for R-Car V4H (r8a779g0). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20220428135058.597586-2-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-12-08clk: renesas: cpg-mssr: Add support for R-Car S4-8Yoshihiro Shimoda
Initial CPG support for R-Car S4-8 (r8a779f0). Inspired by patches in the BSP by LUU HOAI. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20211201073308.1003945-10-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-12-08clk: renesas: rcar-gen4: Introduce R-Car Gen4 CPG driverYoshihiro Shimoda
According to the official website [1], the R-Car V3U SoC is based on the R-Car Gen4 architecture. So, introduce R-Car Gen4 CPG driver. [1] https://www.renesas.com/us/en/products/automotive-products/automotive-system-chips-socs/r-car-v3u-best-class-r-car-v3u-asil-d-system-chip-automated-driving Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20211201073308.1003945-9-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-11-19clk: renesas: cpg-mssr: propagate return value of_genpd_add_provider_simple()Lad Prabhakar
of_genpd_add_provider_simple() might fail, this patch makes sure we check the return value of of_genpd_add_provider_simple() by propagating the return value to the caller of cpg_mssr_add_clk_domain(). Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20211117115101.28281-5-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-11-19clk: renesas: cpg-mssr: Check return value of pm_genpd_init()Lad Prabhakar
Make sure we check the return value of pm_genpd_init() which might fail. Also add a devres action to remove the power-domain in-case the probe callback fails further down in the code flow. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20211117115101.28281-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-05-27clk: renesas: cpg-mssr: Make srstclr[] comment block consistentGeert Uytterhoeven
Make the style of the comment block for the Software Reset Clearing Register offsets consistent with the comment blocks for the other register offsets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/97dde75fe3ff27b9639c59a43cddbd9d5c405d0c.1620119700.git.geert+renesas@glider.be
2021-05-27clk: renesas: cpg-mssr: Remove unused [RM]MSTPCR() definitionsGeert Uytterhoeven
The Realtime Module Stop Control Register definitions (RMSTPCR(i)) are incorrect for i >= 8 on R-Car Gen2 and Gen3. As these are unused, and not planned to be used, just like the corresponding Modem Module Stop Control Register definitions (MMSTPCR()) on R-Mobile APE6 (they are intended for the software running on the Real-Time and Modem CPU cores), they can just be removed. Reported-by: Hai Nguyen Pham <hai.pham.ud@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/2d8bc4d9806b419ebb06030d2f31b2ea1e59b1d6.1620119700.git.geert+renesas@glider.be
2021-03-30clk: renesas: Zero init clk_init_dataGeert Uytterhoeven
As clk_core_populate_parent_map() checks clk_init_data.num_parents first, and checks clk_init_data.parent_names[] before clk_init_data.parent_data[] and clk_init_data.parent_hws[], leaving the latter uninitialized doesn't do harm for now. However, it is better to play it safe, and initialize all clk_init_data structures to zeroes, to avoid any current and future members containing uninitialized data. Remove a few explicit zero initializers, which are now superfluous. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20210326105434.1574796-1-geert+renesas@glider.be
2021-01-28clk: renesas: cpg-mssr: Fix formatting issues for 'smstpcr_saved's documentationLee Jones
Fixes the following W=1 kernel build warning(s): drivers/clk/renesas/renesas-cpg-mssr.c:168: warning: Function parameter or member 'smstpcr_saved' not described in 'cpg_mssr_priv' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210126124540.3320214-12-lee.jones@linaro.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-12-10clk: renesas: cpg-mssr: fix kerneldoc of cpg_mssr_privKrzysztof Kozlowski
The struct cpg_mssr_priv missed proper formatting: drivers/clk/renesas/renesas-cpg-mssr.c:142: warning: cannot understand function prototype: 'struct cpg_mssr_priv ' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201103162435.13689-7-krzk@kernel.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-09-17clk: renesas: cpg-mssr: Add support for R-Car V3UYoshihiro Shimoda
Initial support for R-Car V3U (r8a779a0), including core, module clocks, resets, and register access, because register specification differs from R-Car Gen2/3. Inspired by patches in the BSP by LUU HOAI. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1599810232-29035-4-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-09-17clk: renesas: cpg-mssr: Add register pointers into struct cpg_mssr_privYoshihiro Shimoda
To support other register layouts in the future, add register pointers of {control,status,reset,reset_clear}_regs into struct cpg_mssr_priv. After that, we can remove unused macros like MSTPSR(). No behavioral changes. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1599810232-29035-3-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-09-17clk: renesas: cpg-mssr: Use enum clk_reg_layout instead of a boolean flagYoshihiro Shimoda
Geert suggested defining multiple register layout variants using an enum [1] to support further devices like R-Car V3U. So, use enum clk_reg_layout instead of a boolean .stbyctrl flag. No behavioral change. [1] https://lore.kernel.org/linux-renesas-soc/CAMuHMdVAgN69p9FFnQdO4iHk2CHkeNaVui2Q-FOY6_BFVjQ-Nw@mail.gmail.com/ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1599810232-29035-2-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-07-13clk: renesas: cpg-mssr: Add r8a774e1 supportMarian-Cristian Rotariu
Add support for the RZ/G2H (R8A774E1) SoC to the Renesas Clock Pulse Generator / Module Standby and Software Reset driver. Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/1594138692-16816-11-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com [geert: Mark RWDT critical, cfr. commit f23f1101ad0ef1ac ("clk: renesas: rcar-gen3: Mark RWDT clocks as critical")] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-06-22clk: renesas: cpg-mssr: Mark clocks as critical only if on at bootUlrich Hecht
This allows us to add the RWDT clock to the list of critical clocks without keeping it enabled needlessly if not used. Changing the semantics of crit_mod_clks in this way is safe for the current user (INTC-AP) because it is never off at boot time. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Link: https://lore.kernel.org/r/20200616162626.27944-2-uli+renesas@fpond.eu Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-05-18clk: renesas: cpg-mssr: Fix STBCR suspend/resume handlingGeert Uytterhoeven
On SoCs with Standby Control Registers (STBCRs) instead of Module Stop Control Registers (MSTPCRs), the suspend handler saves the wrong registers, and the resume handler prints the wrong register in an error message. Fortunately this cannot happen yet, as the suspend/resume code is used on PSCI systems only, and systems with STBCRs (RZ/A1 and RZ/A2) do not use PSCI. Still, it is better to fix this, to avoid this becoming a problem in the future. Distinguish between STBCRs and MSTPCRs where needed. Replace the useless printing of the virtual register address in the resume error message by printing the register index. Fixes: fde35c9c7db5732c ("clk: renesas: cpg-mssr: Add R7S9210 support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200507074713.30113-1-geert+renesas@glider.be
2020-04-30clk: renesas: cpg-mssr: Add R8A7742 supportLad Prabhakar
Add RZ/G1H (R8A7742) Clock Pulse Generator / Module Standby and Software Reset support, using the CPG/MSSR driver core and the common R-Car Gen2 (and RZ/G) code. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1587998460-7804-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-11-01clk: renesas: r8a7796: Add R8A77961 CPG/MSSR supportGeert Uytterhoeven
Add support for the R-Car M3-W+ (R8A77961) SoC to the Renesas Clock Pulse Generator / Module Standby and Software Reset driver. R-Car M3-W+ is very similar to R-Car M3-W (R8A77960), which allows for both SoCs to share a driver. R-Car M3-W+ lacks a few modules, so their clocks must be nullified. Based on a patch in the BSP by Takeshi Kihara <takeshi.kihara.df@renesas.com>. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191023122941.12342-5-geert+renesas@glider.be
2019-11-01clk: renesas: Rename CLK_R8A7796 to CLK_R8A77960Geert Uytterhoeven
Rename CONFIG_CLK_R8A7796 for R-Car M3-W (R8A77960) to CONFIG_CLK_R8A77960, to avoid confusion with R-Car M3-W+ (R8A77961), which will use CONFIG_CLK_R8A77961. Extend the dependency of CONFIG_CLK_R8A77960 from CONFIG_ARCH_R8A7796 to CONFIG_ARCH_R8A77960, to relax dependencies for a future rename of the SoC configuration symbol. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191023122941.12342-4-geert+renesas@glider.be
2019-10-01clk: renesas: cpg-mssr: Add r8a774b1 supportBiju Das
Add RZ/G2N (R8A774B1) Clock Pulse Generator / Module Standby and Software Reset support. Based on the Table 8.4d of "RZ/G Series, 2nd Generation User's Manual: Hardware (Rev. 0.80, May 2019)". Signed-off-by: Biju Das <biju.das@bp.renesas.com> Link: https://lore.kernel.org/r/1568881036-4404-7-git-send-email-biju.das@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-09-20Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "We have a small collection of core framework updates this time, mostly around clk registration by clk providers and debugfs "nice to haves" for rate constraints. I'll highlight that we're now setting the clk_init_data pointer inside struct clk_hw to NULL during clk_register(), which may break some drivers that thought they could use that pointer during normal operations. That change has been sitting in next for a while now but maybe something is still broken. We'l see. Other than that the core framework changes aren't invasive and they're fixing bugs, simplifying, and making things better. On the clk driver side we got the usual addition of new SoC support, new features for existing drivers, and bug fixes scattered throughout. The biggest diffstat is the Amlogic driver that gained CPU clk support in addition to migrating to the new way of specifying clk parents. After that the Qualcomm, i.MX, Mediatek, and Rockchip clk drivers got support for various new SoCs and clock controllers from those vendors. Core: - Drop NULL checks in clk debugfs - Add min/max rates to clk debugfs - Set clk_init_data pointer inside clk_hw to NULL after registration - Make clk_bulk_get_all() return an 'id' corresponding to clock-names - Evict parents from parent cache when they're unregistered New Drivers: - Add clock driver for i.MX8MN SoCs - Support aspeed AST2600 SoCs - Support for Mediatek MT6779 SoCs - Support qcom SM8150 GCC and RPMh clks - Support qcom QCS404 WCSS clks - Add CPU clock support for Armada 7K/8K (specifically AP806 and AP807) - Addition of clock driver for Rockchip rk3308 SoCs Updates: - Add regulator support to the cdce925 clk driver - Add support for Raspberry Pi 4 bcm2711 SoCs - Add SDIO gate support to aspeed driver - Add missing of_node_put() calls in various clk drivers - Migrate Amlogic driver to new clock parent description method - Add DVFS support to Amlogic Meson g12 - Add Amlogic Meson g12a reset support to the axg audio clock controller - Add sm1 support to the Amlogic Meson g12a clock controller - Switch i.MX8MM clock driver to platform driver - Add Hifi4 DSP related clocks for i.MX8QXP SoC - Fix Audio PLL setting and parent clock for USB - Misc i.MX8 clock driver improvements and corrections - Set floor ops for Qualcomm SD clks so that rounding works - Fix "always-on" Clock Domains on Renesas R-Car M1A, RZ/A1, RZ/A2, and RZ/N1 - Enable the Allwinner V3 SoC and fix the i2s clock for H6" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (137 commits) clk: Drop !clk checks in debugfs dumping clk: imx: imx8mn: fix pll mux bit clk: imx: imx8mm: fix pll mux bit clk: imx: clk-pll14xx: unbypass PLL by default clk: imx: pll14xx: avoid glitch when set rate clk: mvebu: ap80x: add AP807 clock support clk: mvebu: ap806: Prepare the introduction of AP807 clock support clk: mvebu: ap806: add AP-DCLK (hclk) to system controller driver clk: mvebu: ap806: be more explicit on what SaR is clk: mvebu: ap80x-cpu: add AP807 CPU clock support clk: mvebu: ap806-cpu: prepare mapping of AP807 CPU clock dt-bindings: ap806: Document AP807 clock compatible dt-bindings: ap80x: Document AP807 CPU clock compatible clk: sprd: add missing kfree clk: at91: allow 24 Mhz clock as input for PLL clk: Make clk_bulk_get_all() return a valid "id" clk: actions: Fix factor clk struct member access clk: qcom: rcg: Return failure for RCG update clk: remove extra ---help--- tags in Kconfig clk: add include guard to clk-conf.h ...
2019-08-23clk: renesas: cpg-mssr: Set GENPD_FLAG_ALWAYS_ON for clock domainGeert Uytterhoeven
The CPG/MSSR Clock Domain driver does not implement the generic_pm_domain.power_{on,off}() callbacks, as the domain itself cannot be powered down. Hence the domain should be marked as always-on by setting the GENPD_FLAG_ALWAYS_ON flag, to prevent the core PM Domain code from considering it for power-off, and doing unnessary processing. Note that this only affects RZ/A2 SoCs. On R-Car Gen2 and Gen3 SoCs, the R-Car SYSC driver handles Clock Domain creation, and offloads only device attachment/detachment to the CPG/MSSR driver. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-07-22clk: renesas: cpg-mssr: Fix reset control race conditionGeert Uytterhoeven
The module reset code in the Renesas CPG/MSSR driver uses read-modify-write (RMW) operations to write to a Software Reset Register (SRCRn), and simple writes to write to a Software Reset Clearing Register (SRSTCLRn), as was mandated by the R-Car Gen2 and Gen3 Hardware User's Manuals. However, this may cause a race condition when two devices are reset in parallel: if the reset for device A completes in the middle of the RMW operation for device B, device A may be reset again, causing subtle failures (e.g. i2c timeouts): thread A thread B -------- -------- val = SRCRn val |= bit A SRCRn = val delay val = SRCRn (bit A is set) SRSTCLRn = bit A (bit A in SRCRn is cleared) val |= bit B SRCRn = val (bit A and B are set) This can be reproduced on e.g. Salvator-XS using: $ while true; do i2cdump -f -y 4 0x6A b > /dev/null; done & $ while true; do i2cdump -f -y 2 0x10 b > /dev/null; done & i2c-rcar e6510000.i2c: error -110 : 40000002 i2c-rcar e66d8000.i2c: error -110 : 40000002 According to the R-Car Gen3 Hardware Manual Errata for Rev. 0.80 of Feb 28, 2018, reflected in Rev. 1.00 of the R-Car Gen3 Hardware User's Manual, writes to SRCRn do not require read-modify-write cycles. Note that the R-Car Gen2 Hardware User's Manual has not been updated yet, and still says a read-modify-write sequence is required. According to the hardware team, the reset hardware block is the same on both R-Car Gen2 and Gen3, though. Hence fix the issue by replacing the read-modify-write operations on SRCRn by simple writes. Reported-by: Yao Lihua <Lihua.Yao@desay-svautomotive.com> Fixes: 6197aa65c4905532 ("clk: renesas: cpg-mssr: Add support for reset control") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Linh Phung <linh.phung.jy@renesas.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-20clk: renesas: cpg-mssr: Use [] to denote a flexible array memberGeert Uytterhoeven
Flexible array members should be denoted using [] instead of [0], else gcc will not warn when they are no longer at the end of the structure. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-06-20clk: renesas: cpg-mssr: Combine driver-private and clock array allocationGeert Uytterhoeven
Make cpg_mssr_priv.clks[] a flexible array member, and use the new struct_size() helper, to combine the allocation of the driver-private structure and array of available clocks. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-06-20clk: renesas: cpg-mssr: Update kerneldoc for struct cpg_mssr_privGeert Uytterhoeven
New fields were added, but kerneldoc was forgotten, or inserted at the wrong place. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-06-04clk: renesas: cpg-mssr: Remove error messages on out-of-memory conditionsGeert Uytterhoeven
pm_clk_create() and pm_clk_add_clk() can fail only when running out of memory. Hence there is no need to print error messages on failure, as the memory allocation core already takes care of that. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
2019-06-04clk: renesas: cpg-mssr: Use genpd of_node instead of local copyGeert Uytterhoeven
Since commit 6a0ae73d95956f7e ("PM / Domain: Add support to parse domain's OPP table"), of_genpd_add_provider_simple() fills in the dev.of_node field in the generic_pm_domain structure. Hence cpg_mssr_is_pm_clk() can use that instead of its own copy in the driver-private cpg_mssr_clk_domain structure. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
2019-05-15clk: Remove io.h from clk-provider.hStephen Boyd
Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-10clk: renesas: Remove usage of CLK_IS_BASICStephen Boyd
This flag doesn't look to be used by any code, just set in various clk init structures and then never tested again. Remove it from these drivers as it doesn't provide any benefit. Cc: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: <linux-renesas-soc@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-18Merge branch 'clk-renesas' into clk-nextStephen Boyd
* clk-renesas: (36 commits) clk: renesas: r7s9210: Add SPI clocks clk: renesas: r7s9210: Move table update to separate function clk: renesas: r7s9210: Convert some clocks to early clk: renesas: cpg-mssr: Add early clock support clk: renesas: r8a77970: Add TPU clock clk: renesas: r8a77990: Fix incorrect PLL0 divider in comment dt-bindings: clock: renesas: cpg-mssr: Document r8a774c0 clk: renesas: cpg-mssr: Add r8a774c0 support clk: renesas: Add r8a774c0 CPG Core Clock Definitions clk: renesas: r8a7743: Add r8a7744 support clk: renesas: Add r8a7744 CPG Core Clock Definitions dt-bindings: clock: renesas: cpg-mssr: Document r8a7744 binding dt-bindings: clock: renesas: Convert to SPDX identifiers clk: renesas: cpg-mssr: Add R7S9210 support clk: renesas: r8a77970: Add TMU clocks clk: renesas: r8a77970: Add CMT clocks clk: renesas: r9a06g032: Fix UART34567 clock rate clk: renesas: r8a77970: Add SD0H/SD0 clocks for SDHI clk: renesas: r8a77980: Add CMT clocks clk: renesas: r8a77990: Add missing I2C7 clock ...
2018-09-26clk: renesas: cpg-mssr: Add early clock supportChris Brandt
Add support for SoCs that need to register core and module clocks early in order to use OF drivers that exclusively use macros such as TIMER_OF_DECLARE. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-09-19clk: renesas: cpg-mssr: Add r8a774c0 supportFabrizio Castro
Add RZ/G2E (R8A774C0) Clock Pulse Generator / Module Standby and Software Reset support. Based on Table 8.2g of "RZ/G Series, 2nd Generation User's Manual: Hardware (Rev. 0.61, June 12, 2018)". Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-09-19clk: renesas: r8a7743: Add r8a7744 supportBiju Das
Add RZ/G1N (R8A7744) Clock Pulse Generator / Module Standby and Software Reset support. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-09-11clk: renesas: cpg-mssr: Add R7S9210 supportChris Brandt
Add support for the R7S9210 (RZ/A2) Clock Pulse Generator and Module Standby. The Module Standby HW in the RZ/A series is very close to R-Car HW, except for how the registers are laid out. The MSTP registers are only 8-bits wide, there are no status registers (MSTPSR), and the register offsets are a little different. Since the RZ/A hardware manuals refer to these registers as the Standby Control Registers, we'll use that name to distinguish the RZ/A type from the R-Car type. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Acked-by: Rob Herring <robh@kernel.org> # DT bits Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-08-30clk: renesas: use SPDX identifier for Renesas driversWolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-08-27clk: renesas: cpg-mssr: Add r8a774a1 supportBiju Das
Add RZ/G2M (R8A774A1) Clock Pulse Generator / Module Standby and Software Reset support. Based on the Table 8.2b of "RZ/G Series, 2nd Generation User's Manual: Hardware ((Rev. 0.61, June 12, 2018)". Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-08-27clk: renesas: cpg-mssr: Add support for fixed rate clocksGeert Uytterhoeven
Add support for defining fixed rate clocks, to be used for on-chip oscillators. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-06-09Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time we have a good set of changes to the core framework that do some general cleanups, but nothing too major. The majority of the diff goes to two SoCs, Actions Semi and Qualcomm. A brand new driver is introduced for Actions Semi so it takes up some lines to add all the different types, and the Qualcomm diff is there because we add support for two SoCs and it's quite a bit of data. Otherwise the big driver updates are on TI Davinci and Amlogic platforms. And then the long tail of driver updates for various fixes and stuff follows after that. Core: - debugfs cleanups removing error checking and an unused provider API - Removal of a clk init typedef that isn't used - Usage of match_string() to simplify parent string name matching - OF clk helpers moved to their own file (linux/of_clk.h) - Make clk warnings more readable across kernel versions New Drivers: - Qualcomm SDM845 GCC and Video clk controllers - Qualcomm MSM8998 GCC - Actions Semi S900 SoC support - Nuvoton npcm750 microcontroller clks - Amlogic axg AO clock controller Removed Drivers: - Deprecated Rockchip clk-gate driver Updates: - debugfs functions stopped checking return values - Support for the MSIOF module clocks on Rensas R-Car M3-N - Support for the new Rensas RZ/G1C and R-Car E3 SoCs - Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs - Berlin and Amlogic SPDX tagging - Usage of of_clk_get_parent_count() in more places - Proper implementation of the CDEV1/2 clocks on Tegra20 - Allwinner H6 PRCM clock support and R40 EMAC support - Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet - Round closest support for meson's mpll driver - Support for meson8b nand clocks and gxbb video decoder clocks - Mediatek mali clks - STM32MP1 fixes - Uniphier LD11/LD20 stream demux system clock" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits) clk: qcom: Export clk_fabia_pll_configure() clk: bcm: Update and add Stingray clock entries dt-bindings: clk: Update Stingray binding doc clk-si544: Properly round requested frequency to nearest match clk: ingenic: jz4770: Add 150us delay after enabling VPU clock clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle clk: ingenic: jz4770: Change OTG from custom to standard gated clock clk: ingenic: Support specifying "wait for clock stable" delay clk: ingenic: Add support for clocks whose gate bit is inverted clk: use match_string() helper clk: bcm2835: use match_string() helper clk: Return void from debug_init op clk: remove clk_debugfs_add_file() clk: tegra: no need to check return value of debugfs_create functions clk: davinci: no need to check return value of debugfs_create functions clk: bcm2835: no need to check return value of debugfs_create functions clk: no need to check return value of debugfs_create functions clk: imx6: add EPIT clock support clk: mvebu: use correct bit for 98DX3236 NAND ...
2018-06-06Merge tag 'printk-for-4.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Help userspace log daemons to catch up with a flood of messages. They will get woken after each message even if the console is far behind and handled by another process. - Flush printk safe buffers safely even when panic() happens in the normal context. - Fix possible va_list reuse when race happened in printk_safe(). - Remove %pCr printf format to prevent sleeping in the atomic context. - Misc vsprintf code cleanup. * tag 'printk-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: printk: drop in_nmi check from printk_safe_flush_on_panic() lib/vsprintf: Remove atomic-unsafe support for %pCr serial: sh-sci: Stop using printk format %pCr thermal: bcm2835: Stop using printk format %pCr clk: renesas: cpg-mssr: Stop using printk format %pCr printk: fix possible reuse of va_list variable printk: wake up klogd in vprintk_emit vsprintf: Tweak pF/pf comment lib/vsprintf: Mark expected switch fall-through lib/vsprintf: Replace space with '_' before crng is ready lib/vsprintf: Deduplicate pointer_string() lib/vsprintf: Move pointer_string() upper lib/vsprintf: Make flag_spec global lib/vsprintf: Make strspec global lib/vsprintf: Make dec_spec global lib/test_printf: Mark big constant with UL
2018-06-05clk: renesas: cpg-mssr: Stop using printk format %pCrGeert Uytterhoeven
Printk format "%pCr" will be removed soon, as clk_get_rate() must not be called in atomic context. Replace it by open-coding the operation. This is safe here, as the code runs in task context. Link: http://lkml.kernel.org/r/1527845302-12159-2-git-send-email-geert+renesas@glider.be To: Jia-Ju Bai <baijiaju1990@gmail.com> To: Jonathan Corbet <corbet@lwn.net> To: Michael Turquette <mturquette@baylibre.com> To: Stephen Boyd <sboyd@kernel.org> To: Zhang Rui <rui.zhang@intel.com> To: Eduardo Valentin <edubezval@gmail.com> To: Eric Anholt <eric@anholt.net> To: Stefan Wahren <stefan.wahren@i2se.com> To: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-doc@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org # 4.5+ Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-05-09clk: renesas: cpg-mssr: Add support for R-Car E3Yoshihiro Shimoda
Initial support for R-Car E3 (r8a77990), including core and module clocks. Based on the Table 8.2g of "R-Car Series, 3rd Generation User's Manual: Hardware ((Rev. 0.80, Oct 31, 2017) with Manual Errata on Feb. 28, 2018". Inspried by patches by Takeshi Kihara in the BSP. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-04-16clk: renesas: cpg-mssr: Add r8a77470 supportBiju Das
Add RZ/G1C (R8A77470) Clock Pulse Generator / Module Standby and Software Reset support. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-03-21clk: renesas: cpg-mssr: Adjust r8a77980 ifdefMagnus Damm
Adjust the R8A77980-specific #ifdefs to use CLK instead of ARCH to follow same style as other SoCs. Fixes: ce15783c510a9905 ("clk: renesas: cpg-mssr: add R8A77980 support") Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-26clk: renesas: cpg-mssr: Add support for R-Car M3-NJacopo Mondi
Initial support for R-Car M3-N (r8a77965), including core and module clocks. Based on Table 8.2d of "R-Car Series, 3rd Generation User's Manual: Hardware (Rev. 0.80, Oct 31, 2017)". Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-20clk: renesas: cpg-mssr: add R8A77980 supportSergei Shtylyov
Add R-Car V3H (R8A77980) Clock Pulse Generator / Module Standby and Software Reset support, using the CPG/MSSR driver core and the common R-Car Gen3 code. Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-12-14clk: renesas: cpg-mssr: Keep wakeup sources active during system suspendGeert Uytterhoeven
If a device is part of the CPG/MSSR Clock Domain and to be used as a wakeup source, it must be kept active during system suspend. Currently this is handled in device-specific drivers by explicitly increasing the use count of the module clock when the device is configured as a wakeup source. However, the proper way to prevent the device from being stopped is to inform this requirement to the genpd core, by setting the GENPD_FLAG_ACTIVE_WAKEUP flag. Note that this will only affect devices configured as wakeup sources. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-20clk: renesas: div6: Restore clock state during resumeGeert Uytterhoeven
On R-Car Gen3 systems, PSCI system suspend powers down the SoC, losing clock configuration. Register an (optional) notifier to restore the DIV6 clock state during system resume. As DIV6 clocks can be picky w.r.t. modifying multiple register fields at once, restore is not implemented by blindly restoring the register value, but by using the existing cpg_div6_clock_{en,dis}able() helpers. Note that this does not yet support DIV6 clocks with multiple parents, which do not exist on R-Car Gen3 SoCs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
2017-10-20clk: renesas: cpg-mssr: Add support to restore core clocks during resumeGeert Uytterhoeven
On R-Car Gen3 systems, PSCI system suspend powers down the SoC, possibly losing clock configuration. Hence add a notifier chain that can be used by core clocks to save/restore clock state during system suspend/resume. The implementation of the actual clock state save/restore operations is clock-specific, and to be registered with the notifier chain in the SoC or family-specific cpg_mssr_info.cpg_clk_register() callback. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
2017-10-20clk: renesas: cpg-mssr: Restore module clocks during resumeGeert Uytterhoeven
During PSCI system suspend, R-Car Gen3 SoCs are powered down, and their clock register state is lost. Note that as the boot loader skips most initialization after system resume, clock register state differs from the state encountered during normal system boot, too. Hence after s2ram, some operations may fail because module clocks are disabled, while drivers expect them to be still enabled. E.g. EtherAVB fails when Wake-on-LAN has been enabled using "ethtool -s eth0 wol g": ravb e6800000.ethernet eth0: failed to switch device to config mode ravb e6800000.ethernet eth0: device will be stopped after h/w processes are done. ravb e6800000.ethernet eth0: failed to switch device to config PM: Device e6800000.ethernet failed to resume: error -110 In addition, some module clocks that were disabled by clk_disable_unused() may have been re-enabled, wasting power. To fix this, restore all bits of the SMSTPCR registers that represent clocks under control of Linux. Notes: - While this fixes EtherAVB operation after resume from s2ram, EtherAVB cannot be used as an actual wake-up source from s2ram, only from s2idle, due to PSCI limitations, - To avoid overhead on platforms not needing it, the suspend/resume code has a build time dependency on sleep and PSCI support, and a runtime dependency on PSCI. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-25 21:51:39 +0000