summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)Author
2024-03-31Merge tag 'kbuild-fixes-v6.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Deduplicate Kconfig entries for CONFIG_CXL_PMU - Fix unselectable choice entry in MIPS Kconfig, and forbid this structure - Remove unused include/asm-generic/export.h - Fix a NULL pointer dereference bug in modpost - Enable -Woverride-init warning consistently with W=1 - Drop KCSAN flags from *.mod.c files * tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: Fix typo HEIGTH to HEIGHT Documentation/llvm: Note s390 LLVM=1 support with LLVM 18.1.0 and newer kbuild: Disable KCSAN for autogenerated *.mod.c intermediaries kbuild: make -Woverride-init warnings more consistent modpost: do not make find_tosym() return NULL export.h: remove include/asm-generic/export.h kconfig: do not reparent the menu inside a choice block MIPS: move unselectable FIT_IMAGE_FDT_EPM5 out of the "System type" choice cxl: remove CONFIG_CXL_PMU entry in drivers/cxl/Kconfig
2024-03-31kbuild: make -Woverride-init warnings more consistentArnd Bergmann
The -Woverride-init warn about code that may be intentional or not, but the inintentional ones tend to be real bugs, so there is a bit of disagreement on whether this warning option should be enabled by default and we have multiple settings in scripts/Makefile.extrawarn as well as individual subsystems. Older versions of clang only supported -Wno-initializer-overrides with the same meaning as gcc's -Woverride-init, though all supported versions now work with both. Because of this difference, an earlier cleanup of mine accidentally turned the clang warning off for W=1 builds and only left it on for W=2, while it's still enabled for gcc with W=1. There is also one driver that only turns the warning off for newer versions of gcc but not other compilers, and some but not all the Makefiles still use a cc-disable-warning conditional that is no longer needed with supported compilers here. Address all of the above by removing the special cases for clang and always turning the warning off unconditionally where it got in the way, using the syntax that is supported by both compilers. Fixes: 2cd3271b7a31 ("kbuild: avoid duplicate warning options") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2024-03-27drm/amdgpu: fix deadlock while reading mqd from debugfsJohannes Weiner
An errant disk backup on my desktop got into debugfs and triggered the following deadlock scenario in the amdgpu debugfs files. The machine also hard-resets immediately after those lines are printed (although I wasn't able to reproduce that part when reading by hand): [ 1318.016074][ T1082] ====================================================== [ 1318.016607][ T1082] WARNING: possible circular locking dependency detected [ 1318.017107][ T1082] 6.8.0-rc7-00015-ge0c8221b72c0 #17 Not tainted [ 1318.017598][ T1082] ------------------------------------------------------ [ 1318.018096][ T1082] tar/1082 is trying to acquire lock: [ 1318.018585][ T1082] ffff98c44175d6a0 (&mm->mmap_lock){++++}-{3:3}, at: __might_fault+0x40/0x80 [ 1318.019084][ T1082] [ 1318.019084][ T1082] but task is already holding lock: [ 1318.020052][ T1082] ffff98c4c13f55f8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: amdgpu_debugfs_mqd_read+0x6a/0x250 [amdgpu] [ 1318.020607][ T1082] [ 1318.020607][ T1082] which lock already depends on the new lock. [ 1318.020607][ T1082] [ 1318.022081][ T1082] [ 1318.022081][ T1082] the existing dependency chain (in reverse order) is: [ 1318.023083][ T1082] [ 1318.023083][ T1082] -> #2 (reservation_ww_class_mutex){+.+.}-{3:3}: [ 1318.024114][ T1082] __ww_mutex_lock.constprop.0+0xe0/0x12f0 [ 1318.024639][ T1082] ww_mutex_lock+0x32/0x90 [ 1318.025161][ T1082] dma_resv_lockdep+0x18a/0x330 [ 1318.025683][ T1082] do_one_initcall+0x6a/0x350 [ 1318.026210][ T1082] kernel_init_freeable+0x1a3/0x310 [ 1318.026728][ T1082] kernel_init+0x15/0x1a0 [ 1318.027242][ T1082] ret_from_fork+0x2c/0x40 [ 1318.027759][ T1082] ret_from_fork_asm+0x11/0x20 [ 1318.028281][ T1082] [ 1318.028281][ T1082] -> #1 (reservation_ww_class_acquire){+.+.}-{0:0}: [ 1318.029297][ T1082] dma_resv_lockdep+0x16c/0x330 [ 1318.029790][ T1082] do_one_initcall+0x6a/0x350 [ 1318.030263][ T1082] kernel_init_freeable+0x1a3/0x310 [ 1318.030722][ T1082] kernel_init+0x15/0x1a0 [ 1318.031168][ T1082] ret_from_fork+0x2c/0x40 [ 1318.031598][ T1082] ret_from_fork_asm+0x11/0x20 [ 1318.032011][ T1082] [ 1318.032011][ T1082] -> #0 (&mm->mmap_lock){++++}-{3:3}: [ 1318.032778][ T1082] __lock_acquire+0x14bf/0x2680 [ 1318.033141][ T1082] lock_acquire+0xcd/0x2c0 [ 1318.033487][ T1082] __might_fault+0x58/0x80 [ 1318.033814][ T1082] amdgpu_debugfs_mqd_read+0x103/0x250 [amdgpu] [ 1318.034181][ T1082] full_proxy_read+0x55/0x80 [ 1318.034487][ T1082] vfs_read+0xa7/0x360 [ 1318.034788][ T1082] ksys_read+0x70/0xf0 [ 1318.035085][ T1082] do_syscall_64+0x94/0x180 [ 1318.035375][ T1082] entry_SYSCALL_64_after_hwframe+0x46/0x4e [ 1318.035664][ T1082] [ 1318.035664][ T1082] other info that might help us debug this: [ 1318.035664][ T1082] [ 1318.036487][ T1082] Chain exists of: [ 1318.036487][ T1082] &mm->mmap_lock --> reservation_ww_class_acquire --> reservation_ww_class_mutex [ 1318.036487][ T1082] [ 1318.037310][ T1082] Possible unsafe locking scenario: [ 1318.037310][ T1082] [ 1318.037838][ T1082] CPU0 CPU1 [ 1318.038101][ T1082] ---- ---- [ 1318.038350][ T1082] lock(reservation_ww_class_mutex); [ 1318.038590][ T1082] lock(reservation_ww_class_acquire); [ 1318.038839][ T1082] lock(reservation_ww_class_mutex); [ 1318.039083][ T1082] rlock(&mm->mmap_lock); [ 1318.039328][ T1082] [ 1318.039328][ T1082] *** DEADLOCK *** [ 1318.039328][ T1082] [ 1318.040029][ T1082] 1 lock held by tar/1082: [ 1318.040259][ T1082] #0: ffff98c4c13f55f8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: amdgpu_debugfs_mqd_read+0x6a/0x250 [amdgpu] [ 1318.040560][ T1082] [ 1318.040560][ T1082] stack backtrace: [ 1318.041053][ T1082] CPU: 22 PID: 1082 Comm: tar Not tainted 6.8.0-rc7-00015-ge0c8221b72c0 #17 3316c85d50e282c5643b075d1f01a4f6365e39c2 [ 1318.041329][ T1082] Hardware name: Gigabyte Technology Co., Ltd. B650 AORUS PRO AX/B650 AORUS PRO AX, BIOS F20 12/14/2023 [ 1318.041614][ T1082] Call Trace: [ 1318.041895][ T1082] <TASK> [ 1318.042175][ T1082] dump_stack_lvl+0x4a/0x80 [ 1318.042460][ T1082] check_noncircular+0x145/0x160 [ 1318.042743][ T1082] __lock_acquire+0x14bf/0x2680 [ 1318.043022][ T1082] lock_acquire+0xcd/0x2c0 [ 1318.043301][ T1082] ? __might_fault+0x40/0x80 [ 1318.043580][ T1082] ? __might_fault+0x40/0x80 [ 1318.043856][ T1082] __might_fault+0x58/0x80 [ 1318.044131][ T1082] ? __might_fault+0x40/0x80 [ 1318.044408][ T1082] amdgpu_debugfs_mqd_read+0x103/0x250 [amdgpu 8fe2afaa910cbd7654c8cab23563a94d6caebaab] [ 1318.044749][ T1082] full_proxy_read+0x55/0x80 [ 1318.045042][ T1082] vfs_read+0xa7/0x360 [ 1318.045333][ T1082] ksys_read+0x70/0xf0 [ 1318.045623][ T1082] do_syscall_64+0x94/0x180 [ 1318.045913][ T1082] ? do_syscall_64+0xa0/0x180 [ 1318.046201][ T1082] ? lockdep_hardirqs_on+0x7d/0x100 [ 1318.046487][ T1082] ? do_syscall_64+0xa0/0x180 [ 1318.046773][ T1082] ? do_syscall_64+0xa0/0x180 [ 1318.047057][ T1082] ? do_syscall_64+0xa0/0x180 [ 1318.047337][ T1082] ? do_syscall_64+0xa0/0x180 [ 1318.047611][ T1082] entry_SYSCALL_64_after_hwframe+0x46/0x4e [ 1318.047887][ T1082] RIP: 0033:0x7f480b70a39d [ 1318.048162][ T1082] Code: 91 ba 0d 00 f7 d8 64 89 02 b8 ff ff ff ff eb b2 e8 18 a3 01 00 0f 1f 84 00 00 00 00 00 80 3d a9 3c 0e 00 00 74 17 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 5b c3 66 2e 0f 1f 84 00 00 00 00 00 53 48 83 [ 1318.048769][ T1082] RSP: 002b:00007ffde77f5c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 1318.049083][ T1082] RAX: ffffffffffffffda RBX: 0000000000000800 RCX: 00007f480b70a39d [ 1318.049392][ T1082] RDX: 0000000000000800 RSI: 000055c9f2120c00 RDI: 0000000000000008 [ 1318.049703][ T1082] RBP: 0000000000000800 R08: 000055c9f2120a94 R09: 0000000000000007 [ 1318.050011][ T1082] R10: 0000000000000000 R11: 0000000000000246 R12: 000055c9f2120c00 [ 1318.050324][ T1082] R13: 0000000000000008 R14: 0000000000000008 R15: 0000000000000800 [ 1318.050638][ T1082] </TASK> amdgpu_debugfs_mqd_read() holds a reservation when it calls put_user(), which may fault and acquire the mmap_sem. This violates the established locking order. Bounce the mqd data through a kernel buffer to get put_user() out of the illegal section. Fixes: 445d85e3c1df ("drm/amdgpu: add debugfs interface for reading MQDs") Cc: stable@vger.kernel.org # v6.5+ Reviewed-by: Shashank Sharma <shashank.sharma@amd.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-27drm/amdgpu: enable UMSCH 4.0.6Lang Yu
Share same codes with 4.0.5 and enable collaborate mode for VPE. Signed-off-by: Lang Yu <Lang.Yu@amd.com> Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-27drm/amdgpu/umsch: update UMSCH 4.0 FW interfaceLang Yu
Align with FW changes. Signed-off-by: Lang Yu <Lang.Yu@amd.com> Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-27drm/amd/display: Set DCN351 BB and IP the same as DCN35Xi Liu
[WHY & HOW] DCN351 and DCN35 should use the same bounding box and IP settings. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Xi Liu <xi.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-27drm/amd/display: Fix bounds check for dcn35 DcfClocksRoman Li
[Why] NumFclkLevelsEnabled is used for DcfClocks bounds check instead of designated NumDcfClkLevelsEnabled. That can cause array index out-of-bounds access. [How] Use designated variable for dcn35 DcfClocks bounds check. Fixes: a8edc9cc0b14 ("drm/amd/display: Fix array-index-out-of-bounds in dcn35_clkmgr") Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Sun peng Li <sunpeng.li@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-27drm/amd/display: Remove MPC rate control logic from DCN30 and aboveGeorge Shen
[Why] MPC flow rate control is not needed for DCN30 and above. Current logic that uses it can result in underflow for certain edge cases (such as DSC N422 + ODM combine + 422 left edge pixel). [How] Remove MPC flow rate control logic and programming for DCN30 and above. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-27drm/amd/display: fix a dereference of a NULL pointerWenjing Liu
[why&how] In some platform out_transfer_func may not be popualted. We need to check for null before dereferencing it. Fixes: d2dea1f14038 ("drm/amd/display: Generalize new minimal transition path") Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-27drm/amd/display: Send DTBCLK disable message on first commitTaimur Hassan
[Why] Previous patch to allow DTBCLK disable didn't address boot case. Driver thinks DTBCLK is disabled by default, so we don't send disable message to PMFW. DTBCLK is then enabled at idle desktop on boot, burning power. [How] Set dtbclk_en to true on boot so that disable message is sent during first commit. Fixes: 27750e176a4f ("drm/amd/display: Allow DTBCLK disable for DCN35") Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Taimur Hassan <syed.hassan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-27drm/amd/display: Update dcn351 to latest dcn35 configSung Joon Kim
[why & how] There were some fixes in dcn35 that need to be ported over to dcn351 to prevent any regression. Signed-off-by: Sung Joon Kim <sungkim@amd.com> Reviewed-by: Liu, Xi (Alex) <xiliu102@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-27drm/amd/display: fix IPX enablementHamza Mahfooz
We need to re-enable idle power optimizations after entering PSR. Since, we get kicked out of idle power optimizations before entering PSR (entering PSR requires us to write to DCN registers, which isn't allowed while we are in IPS). Fixes: a9b1a4f684b3 ("drm/amd/display: Add more checks for exiting idle in DC") Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-27drm/amd: Flush GFXOFF requests in prepare stageMario Limonciello
If the system hasn't entered GFXOFF when suspend starts it can cause hangs accessing GC and RLC during the suspend stage. Cc: <stable@vger.kernel.org> # 6.1.y: 5095d5418193 ("drm/amd: Evict resources during PM ops prepare() callback") Cc: <stable@vger.kernel.org> # 6.1.y: cb11ca3233aa ("drm/amd: Add concept of running prepare_suspend() sequence for IP blocks") Cc: <stable@vger.kernel.org> # 6.1.y: 2ceec37b0e3d ("drm/amd: Add missing kernel doc for prepare_suspend()") Cc: <stable@vger.kernel.org> # 6.1.y: 3a9626c816db ("drm/amd: Stop evicting resources on APUs in suspend") Cc: <stable@vger.kernel.org> # 6.6.y: 5095d5418193 ("drm/amd: Evict resources during PM ops prepare() callback") Cc: <stable@vger.kernel.org> # 6.6.y: cb11ca3233aa ("drm/amd: Add concept of running prepare_suspend() sequence for IP blocks") Cc: <stable@vger.kernel.org> # 6.6.y: 2ceec37b0e3d ("drm/amd: Add missing kernel doc for prepare_suspend()") Cc: <stable@vger.kernel.org> # 6.6.y: 3a9626c816db ("drm/amd: Stop evicting resources on APUs in suspend") Cc: <stable@vger.kernel.org> # 6.1+ Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3132 Fixes: ab4750332dbe ("drm/amdgpu/sdma5.2: add begin/end_use ring callbacks") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-27drm/amdkfd: range check cp bad op exception interruptsJonathan Kim
Due to a CP interrupt bug, bad packet garbage exception codes are raised. Do a range check so that the debugger and runtime do not receive garbage codes. Update the user api to guard exception code type checking as well. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Tested-by: Jesse Zhang <jesse.zhang@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-27Revert "drm/amd/display: Fix sending VSC (+ colorimetry) packets for DP/eDP ↵Harry Wentland
displays without PSR" This causes flicker on a bunch of eDP panels. The info_packet code also caused regressions on other OSes that we haven't' seen on Linux yet, but that is likely due to the fact that we haven't had a chance to test those environments on Linux. We'll need to revisit this. This reverts commit 202260f64519e591b5cd99626e441b6559f571a3. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3207 Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3151 Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-03-27drm/amdkfd: fix TLB flush after unmap for GFX9.4.2Eric Huang
TLB flush after unmap accidentially was removed on gfx9.4.2. It is to add it back. Signed-off-by: Eric Huang <jinhuieric.huang@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-03-27drm/amdgpu/vpe: power on vpe when hw_initPeyton Lee
To fix mode2 reset failure. Should power on VPE when hw_init. Signed-off-by: Peyton Lee <peytolee@amd.com> Reviewed-by: Lang Yu <lang.yu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-27drm/amd/display: increase bb clock for DCN351Xi Liu
[Why and how] Bounding box clocks for DCN351 should be increased as per request Reviewed-by: Swapnil Patel <swapnil.patel@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Xi Liu <xi.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-27drm/amd/display: Prevent crash when disable streamChris Park
[Why] Disabling stream encoder invokes a function that no longer exists. [How] Check if the function declaration is NULL in disable stream encoder. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Chris Park <chris.park@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-27drm/amd/display: Increase Z8 watermark times.Natanel Roizenman
Increase Z8 watermark times from 210->250us and 320->350us. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Natanel Roizenman <natanel.roizenman@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-27drm/amdkfd: Check cgroup when returning DMABuf infoMukul Joshi
Check cgroup permissions when returning DMA-buf info and based on cgroup info return the GPU id of the GPU that have access to the BO. Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-27drm/amd/swsmu: add smu 14.0.1 vcn and jpeg msglima1002
add new vcn and jpeg msg v2: squash in updates (Alex) v3: rework code for better compat with other smu14.x variants (Alex) Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: lima1002 <li.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-21Merge tag 'drm-next-2024-03-22' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm fixes from Dave Airlie: "Fixes from the last week (or 3 weeks in amdgpu case), after amdgpu, it's xe and nouveau then a few scattered core fixes. core: - fix rounding in drm_fixp2int_round() bridge: - fix documentation for DRM_BRIDGE_OP_EDID sun4i: - fix 64-bit division on 32-bit architectures tests: - fix dependency on DRM_KMS_HELPER probe-helper: - never return negative values from .get_modes() plus driver fixes xe: - invalidate userptr vma on page pin fault - fail early on sysfs file creation error - skip VMA pinning on xe_exec if no batches nouveau: - clear bo resource bus after eviction - documentation fixes - don't check devinit disable on GSP amdgpu: - Freesync fixes - UAF IOCTL fixes - Fix mmhub client ID mapping - IH 7.0 fix - DML2 fixes - VCN 4.0.6 fix - GART bind fix - GPU reset fix - SR-IOV fix - OD table handling fixes - Fix TA handling on boards without display hardware - DML1 fix - ABM fix - eDP panel fix - DPPCLK fix - HDCP fix - Revert incorrect error case handling in ioremap - VPE fix - HDMI fixes - SDMA 4.4.2 fix - Other misc fixes amdkfd: - Fix duplicate BO handling in process restore" * tag 'drm-next-2024-03-22' of https://gitlab.freedesktop.org/drm/kernel: (50 commits) drm/amdgpu/pm: Don't use OD table on Arcturus drm/amdgpu: drop setting buffer funcs in sdma442 drm/amd/display: Fix noise issue on HDMI AV mute drm/amd/display: Revert Remove pixle rate limit for subvp Revert "drm/amdgpu/vpe: don't emit cond exec command under collaborate mode" Revert "drm/amd/amdgpu: Fix potential ioremap() memory leaks in amdgpu_device_init()" drm/amd/display: Add a dc_state NULL check in dc_state_release drm/amd/display: Return the correct HDCP error code drm/amd/display: Implement wait_for_odm_update_pending_complete drm/amd/display: Lock all enabled otg pipes even with no planes drm/amd/display: Amend coasting vtotal for replay low hz drm/amd/display: Fix idle check for shared firmware state drm/amd/display: Update odm when ODM combine is changed on an otg master pipe with no plane drm/amd/display: Init DPPCLK from SMU on dcn32 drm/amd/display: Add monitor patch for specific eDP drm/amd/display: Allow dirty rects to be sent to dmub when abm is active drm/amd/display: Override min required DCFCLK in dml1_validate drm/amdgpu: Bypass display ta if display hw is not available drm/amdgpu: correct the KGQ fallback message drm/amdgpu/pm: Check the validity of overdiver power limit ...
2024-03-20drm/amdgpu/pm: Don't use OD table on ArcturusMa Jun
OD is not supported on Arcturus, so the OD table should not be used. Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amdgpu: drop setting buffer funcs in sdma442Le Ma
To fix the entity rq NULL issue. This setting has been moved to upper level. Fixes: b70438004a14 ("drm/amdgpu: move buffer funcs setting up a level") Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Fix noise issue on HDMI AV muteLeo Ma
[Why] When mode switching is triggered there is momentary noise visible on some HDMI TV or displays. [How] Wait for 2 frames to make sure we have enough time to send out AV mute and sink receives a full frame. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Leo Ma <hanghong.ma@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Revert Remove pixle rate limit for subvpWenjing Liu
This reverts commit 340383c734f8 ("drm/amd/display: Remove pixle rate limit for subvp") [why] The original commit causes a regression when subvp is applied on ODM required 8k60hz timing. The display shows black screen on boot. The issue can be recovered with hotplug. It also causes MPO to fail. We will temprarily revert this commit and investigate the root cause further. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20Revert "drm/amdgpu/vpe: don't emit cond exec command under collaborate mode"Lang Yu
Ready now. Remove this workaround. This reverts commit d40f6213b52c161fd4634933acbc32103a283363. Signed-off-by: Lang Yu <Lang.Yu@amd.com> Tested-by: Alan Liu <haoping.liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20Revert "drm/amd/amdgpu: Fix potential ioremap() memory leaks in ↵Ma Jun
amdgpu_device_init()" This patch causes the following iounmap erorr and calltrace iounmap: bad address 00000000d0b3631f The original patch was unjustified because amdgpu_device_fini_sw() will always cleanup the rmmio mapping. This reverts commit eb4f139888f636614dab3bcce97ff61cefc4b3a7. Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Suggested-by: Christian König <christian.koenig@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Add a dc_state NULL check in dc_state_releaseAllen Pan
[How] Check wheather state is NULL before releasing it. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Allen Pan <allen.pan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Return the correct HDCP error codeRodrigo Siqueira
[WHY & HOW] If the display is null when creating an HDCP session, return a proper error code. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Implement wait_for_odm_update_pending_completeWenjing Liu
[WHY] Odm update is doubled buffered. We need to wait for ODM update to be completed before optimizing bandwidth or programming new udpates. [HOW] implement wait_for_odm_update_pending_complete function to wait for: 1. odm configuration update is no longer pending in timing generator. 2. no pending dpg pattern update for each active OPP. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Lock all enabled otg pipes even with no planesWenjing Liu
[WHY] On DCN32 we support dynamic ODM even when OTG is blanked. When ODM configuration is dynamically changed and the OTG is on blank pattern, we will need to reprogram OPP's test pattern based on new ODM configuration. Therefore we need to lock the OTG pipe to avoid temporary corruption when we are reprogramming OPP blank patterns. [HOW] Add a new interdependent update lock implementation to lock all enabled OTG pipes even when there is no plane on the OTG for DCN32. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Amend coasting vtotal for replay low hzChunTao Tso
[WHY] The original coasting vtotal is 2 bytes, and it need to be amended to 4 bytes because low hz case. [HOW] Amend coasting vtotal from 2 bytes to 4 bytes. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: ChunTao Tso <chuntao.tso@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Fix idle check for shared firmware stateNicholas Kazlauskas
[WHY] We still had an instance of get_idle_state checking the PMFW scratch register instead of the actual idle allow signal. [HOW] Replace it with the SW state check for whether we had allowed idle through notify_idle. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Duncan Ma <duncan.ma@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Update odm when ODM combine is changed on an otg master ↵Wenjing Liu
pipe with no plane [WHY] When committing an update with ODM combine change when the plane is removing or already removed, we fail to detect odm change in pipe update flags. This has caused mismatch between new dc state and the actual hardware state, because we missed odm programming. [HOW] - Detect odm change even for otg master pipe without a plane. - Update odm config before calling program pipes for pipe with planes. The commit also updates blank pattern programming when odm is changed without plane. This is because number of OPP is changed when ODM combine is changed. Blank pattern is per OPP so we will need to reprogram OPP based on the new pipe topology. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Init DPPCLK from SMU on dcn32Dillon Varone
[WHY & HOW] DPPCLK ranges should be obtained from the SMU when available. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Add monitor patch for specific eDPRyan Lin
[WHY] Some eDP panels' ext caps don't write initial values. The value of dpcd_addr (0x317) can be random and the backlight control interface will be incorrect. [HOW] Add new panel patches to remove sink ext caps. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.5.x Cc: Tsung-hua Lin <tsung-hua.lin@amd.com> Cc: Chris Chi <moukong.chi@amd.com> Reviewed-by: Wayne Lin <wayne.lin@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ryan Lin <tsung-hua.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Allow dirty rects to be sent to dmub when abm is activeJosip Pavic
[WHY] It's beneficial for ABM to know when new frame data are available. [HOW] Add new condition to allow dirty rects to be sent to DMUB when ABM is active. ABM will use this as a signal that a new frame has arrived. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Anthony Koo <anthony.koo@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Josip Pavic <josip.pavic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Override min required DCFCLK in dml1_validateSohaib Nadeem
[WHY]: Increasing min DCFCLK addresses underflow issues that occur when phantom pipe is turned on for some Sub-Viewport configs [HOW]: dcn32_override_min_req_dcfclk is added to override DCFCLK value in dml1_validate when subviewport is being used. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Sohaib Nadeem <sohaib.nadeem@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amdgpu: Bypass display ta if display hw is not availableHawking Zhang
Do not load/invoke display TA if display hardware is not available. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amdgpu: correct the KGQ fallback messagePrike Liang
Fix the KGQ fallback function name, as this will help differentiate the failure in the KCQ enablement. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amdgpu/pm: Check the validity of overdiver power limitMa Jun
Check the validity of overdriver power limit before using it. Fixes: 7968e9748fbb ("drm/amdgpu/pm: Fix the power1_min_cap value") Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Suggested-by: Lazar Lijo <lijo.lazar@amd.com> Suggested-by: Alex Deucher <Alexander.Deucher@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-03-20drm/amdgpu/pm: Fix NULL pointer dereference when get power limitMa Jun
Because powerplay_table initialization is skipped under sriov case, We check and set default lower and upper OD value if powerplay_table is NULL. Fixes: 7968e9748fbb ("drm/amdgpu/pm: Fix the power1_min_cap value") Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reported-by: Yin Zhenguo <zhenguo.yin@amd.com> Suggested-by: Lazar Lijo <lijo.lazar@amd.com> Suggested-by: Alex Deucher <Alexander.Deucher@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-03-20drm/amdgpu: Skip access PF-only registers on gfx10/gfxhub2_1 under SRIOVZhenGuo Yin
[Why] RLCG interface returns "out-of-range" error under SRIOV VF when accessing PF-only registers. [How] Skip access PF-only registers on gfx10/gfxhub2_1 under SRIOV. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amdgpu: Init zone device and drm client after mode-1 reset on reloadAhmad Rehman
In passthrough environment, when amdgpu is reloaded after unload, mode-1 is triggered after initializing the necessary IPs, That init does not include KFD, and KFD init waits until the reset is completed. KFD init is called in the reset handler, but in this case, the zone device and drm client is not initialized, causing app to create kernel panic. v2: Removing the init KFD condition from amdgpu_amdkfd_drm_client_create. As the previous version has the potential of creating DRM client twice. v3: v2 patch results in SDMA engine hung as DRM open causes VM clear to SDMA before SDMA init. Adding the condition to in drm client creation, on top of v1, to guard against drm client creation call multiple times. Signed-off-by: Ahmad Rehman <Ahmad.Rehman@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amdgpu: amdgpu_ttm_gart_bind set gtt bound flagPhilip Yang
Otherwise after the GTT bo is released, the GTT and gart space is freed but amdgpu_ttm_backend_unbind will not clear the gart page table entry and leave valid mapping entry pointing to the stale system page. Then if GPU access the gart address mistakely, it will read undefined value instead page fault, harder to debug and reproduce the real issue. Cc: stable@vger.kernel.org Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amdgpu/vcn: enable vcn1 fw load for VCN 4_0_6Saleemkhan Jamadar
v1 - update the fw header for each vcn instance (Veera) VCN1 has different FW binary in VCN v4_0_6. Add changes to load the VCN1 fw binary Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com> Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Enable DML2 debug flagsAurabindo Pillai
[WHY & HOW] Enable DML2 related debug config options in DM for testing purposes. Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-03-20drm/amd/display: Change default size for dummy plane in DML2Swapnil Patel
[WHY & HOW] Currently, to map dc states into dml_display_cfg, We create a dummy plane if the stream doesn't have any planes attached to it. This dummy plane uses max addersable width height. This results in certain mode validations failing when they shouldn't. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Swapnil Patel <swapnil.patel@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-26 23:45:41 +0000