summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd
AgeCommit message (Collapse)Author
2023-08-30drm/amd/display: add more pipe resource interfacesWenjing Liu
Redesign pipe resource interfaces in resource.h file. The new interface design addresses the issue with lack of pipe topology encapsulation and lack of pipe accessors. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: add new resource interfaces to update odm mpc slice countWenjing Liu
Define two new interfaces to update mpc and odm slice count. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: add new resource interface for acquiring sec opp heads and ↵Wenjing Liu
release pipe [why] We need a new algorithm for acquiring secondary opp heads for ODM combine in dcn32 and a release pipe interface to properly release pipe resources. [how] add two new interfaces in DCN specific resource file. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: rename function to add otg master for streamWenjing Liu
We are renaming acquire first free pipe to add otg master pipe for stream because the former name doesn't indicate that it acquires the first free pipe to use as an otg master pipe. This could cause coding errors if someone uses it to acquire a different pipe type. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: add comments to add plane functionsWenjing Liu
Adding detail comments describing the problem we are solving with add plane function. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Add DPIA Link Encoder Assignment FixMustapha Ghaddar
For DPIA we should have preferred DIG assignment based on DPIA selected as per the ASIC design. Reviewed-by: George Shen <george.shen@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: update blank state on ODM changesWenjing Liu
When we are dynamically adding new ODM slices, we didn't update blank state, if the pipe used by new ODM slice is previously blanked, we will continue outputting blank pixel data on that slice causing right half of the screen showing blank image. The previous fix was a temporary hack to directly update current state when committing new state. This could potentially cause hw and sw state synchronization issues and it is not permitted by dc commit design. Cc: stable@vger.kernel.org Fixes: 7fbf451e7639 ("drm/amd/display: Reinit DPG when exiting dynamic ODM") Reviewed-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Add smu write msg id fail retry processFudong Wang
A benchmark stress test (12-40 machines x 48hours) found that DCN315 has cases where DC writes to an indirect register to set the smu clock msg id, but when we go to read the same indirect register the returned msg id doesn't match with what we just set it to. So, to fix this retry the write until the register's value matches with the requested value. Cc: stable@vger.kernel.org # 6.1+ Fixes: f94903996140 ("drm/amd/display: Add DCN315 CLK_MGR") Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Fudong Wang <fudong.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Add support for 1080p SubVP to reduce idle powerEthan Bitnun
- Override the det to adjust microschedule timings allow for 1080p configs with SubVP - To lower unnecessary risk, we prevent multi 1080p configs from using SubVP, as multi 1080p already has low idle power. - Count the number of streams to verify that we are in a SubVP config before overriding Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Ethan Bitnun <ethan.bitnun@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amdgpu: Add SMU v13.0.6 default reset methodsLijo Lazar
For APUs with SMU v13.0.6, mode-2 reset is kept as default and for others mode-1 is the default reset method. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Tested-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30Partially revert "drm/amd/display: update add plane to context logic with a ↵Wenjing Liu
new algorithm" This partially reverts commit 460ea8980511 ("drm/amd/display: update add plane to context logic with a new algorithm"). The new secondary pipe allocation logic triggers an issue with a specific hardware state transition and causes a frame of corruption when toggling between windowed MPO and ODM desktop only mode. Ideally hwss is supposed to handle this scenario. We are temporarily reverting the logic and investigate the root cause why this transition would cause corruptions. Fixes: 460ea8980511 ("drm/amd/display: update add plane to context logic with a new algorithm") Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amdgpu: add header files for MP 14.0.0Li Ma
This patch will add header files for MP 14.0.0. v2: updates (Alex) Signed-off-by: Li Ma <li.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/amdgpu/amdgpu_doorbell_mgr: Correct misdocumented param 'doorbell_index'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/amdgpu_doorbell_mgr.c:123: warning: Function parameter or member 'doorbell_index' not described in 'amdgpu_doorbell_index_on_bar' drivers/gpu/drm/amd/amdgpu/amdgpu_doorbell_mgr.c:123: warning: Excess function parameter 'db_index' description in 'amdgpu_doorbell_index_on_bar' Reviewed-by: Shashank Sharma <shashank.sharma@amd.com> Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/amdgpu/imu_v11_0: Increase buffer size to ensure all possible values ↵Lee Jones
can be stored Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/imu_v11_0.c: In function ‘imu_v11_0_init_microcode’: drivers/gpu/drm/amd/amdgpu/imu_v11_0.c:52:54: warning: ‘_imu.bin’ directive output may be truncated writing 8 bytes into a region of size between 4 and 33 [-Wformat-truncation=] drivers/gpu/drm/amd/amdgpu/imu_v11_0.c:52:9: note: ‘snprintf’ output between 16 and 45 bytes into a destination of size 40 Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/amdgpu/amdgpu_sdma: Increase buffer size to account for all possible ↵Lee Jones
values Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/amdgpu_sdma.c: In function ‘amdgpu_sdma_init_microcode’: drivers/gpu/drm/amd/amdgpu/amdgpu_sdma.c:217:64: warning: ‘.bin’ directive output may be truncated writing 4 bytes into a region of size between 0 and 32 [-Wformat-truncation=] drivers/gpu/drm/amd/amdgpu/amdgpu_sdma.c:217:17: note: ‘snprintf’ output between 13 and 52 bytes into a destination of size 40 drivers/gpu/drm/amd/amdgpu/amdgpu_sdma.c:215:66: warning: ‘snprintf’ output may be truncated before the last format character [-Wformat-truncation=] drivers/gpu/drm/amd/amdgpu/amdgpu_sdma.c:215:17: note: ‘snprintf’ output between 12 and 41 bytes into a destination of size 40 Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/amdgpu/amdgpu_ras: Increase buffer size to account for all possible ↵Lee Jones
values Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c: In function ‘amdgpu_ras_sysfs_create’: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1406:20: warning: ‘_err_count’ directive output may be truncated writing 10 bytes into a region of size between 1 and 32 [-Wformat-truncation=] drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1405:9: note: ‘snprintf’ output between 11 and 42 bytes into a destination of size 32 Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/amdgpu/amdgpu_device: Provide suitable description for param 'xcc_id'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:516: warning: Function parameter or member 'xcc_id' not described in 'amdgpu_mm_wreg_mmio_rlc' Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd: Fix spelling mistake "throtting" -> "throttling"Colin Ian King
There is a spelling mistake in variable throtting_events, rename it to throttling_events. Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amdgpu: Use kvzalloc() to simplify codeChristophe JAILLET
kvzalloc() can be used instead of kvmalloc() + memset() + explicit NULL assignments. It is less verbose and more future proof. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amdgpu: Remove amdgpu_bo_list_array_entry()Christophe JAILLET
Now that there is an explicit flexible array at the end of 'struct amdgpu_bo_list', it can be used to remove amdgpu_bo_list_array_entry() and simplify some macro. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amdgpu: Remove a redundant sanity checkChristophe JAILLET
The case where 'num_entries' is too big, is already handled by struct_size(), because kvmalloc() would fail. It will return -ENOMEM instead of -EINVAL, but it is only related to a unlikely to happen sanity check. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amdgpu: Explicitly add a flexible array at the end of 'struct ↵Christophe JAILLET
amdgpu_bo_list' 'struct amdgpu_bo_list' is really used as if it was ended by a flex array. So make it more explicit and add a 'struct amdgpu_bo_list_entry entries[]' field at the end of the structure. This way, struct_size() can be used when it is allocated. It is less verbose. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: register edp_backlight_control() for DCN301Hamza Mahfooz
As made mention of in commit 099303e9a9bd ("drm/amd/display: eDP intermittent black screen during PnP"), we need to turn off the display's backlight before powering off an eDP display. Not doing so will result in undefined behaviour according to the eDP spec. So, set DCN301's edp_backlight_control() function pointer to dce110_edp_backlight_control(). Cc: stable@vger.kernel.org Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2765 Fixes: 9c75891feef0 ("drm/amd/display: rework recent update PHY state commit") Suggested-by: Swapnil Patel <swapnil.patel@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amdgpu: Allow issue disable gfx ras cmd to firmwareHawking Zhang
Disable gfx ras command is needed in some use cases Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amdgpu: Add bootloader wait for PSP v13Lijo Lazar
Implement the wait for bootloader call back for PSP v13.0 ASICs. Only for ASICs with PSP v13.0.6, it needs an additional check for VBIOS mailbox status. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Tested-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amdgpu: register a dirty framebuffer callback for fbconHamza Mahfooz
fbcon requires that we implement &drm_framebuffer_funcs.dirty. Otherwise, the framebuffer might take a while to flush (which would manifest as noticeable lag). However, we can't enable this callback for non-fbcon cases since it may cause too many atomic commits to be made at once. So, implement amdgpu_dirtyfb() and only enable it for fbcon framebuffers (we can use the "struct drm_file file" parameter in the callback to check for this since it is only NULL when called by fbcon, at least in the mainline kernel) on devices that support atomic KMS. Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: stable@vger.kernel.org # 6.1+ Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2519 Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30amdgpu/pm: Replace print_clock_levels with emit_clock_levels for arcturusDarren Powell
Replace print_clock_levels with emit_clock_levels for arcturus * replace .print_clk_levels with .emit_clk_levels in arcturus_ppt_funcs * added extra parameter int *offset * removed var size, uses arg *offset instead * removed call to smu_cmn_get_sysfs_buf * errors are returned to caller * returns 0 on success additional incidental changes * changed type of var i, now to remove comparing mismatch types * renamed var s/now/cur_value/ * switch statement default now returns -EINVAL * RAS Recovery returns -EBUSY Based on commit b06b48d7ddae ("amdgpu/pm: Implement emit_clk_levels for navi10") Signed-off-by: Darren Powell <darren.powell@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/pm: fulfill the support for SMU13 `pp_dpm_dcefclk` interfaceEvan Quan
Fulfill the incomplete SMU13 `pp_dpm_dcefclk` implementation. Reported-by: Guan Yu <guan.yu@amd.com> Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/pm: correct SMU13 gfx voltage related OD settingsEvan Quan
The voltage offset setting will be applied to the whole v/f curve line instead of per anchor point base. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amdgpu/pm: Remove the duplicate dpm status checkJesse Zhang
Since the smu firmware has fixed the issue that described in the commit 60d61f4ed6ea ("drm/amdgpu/pm: fix the Stable pstate Test in amdgpu_test"). So we only need keep dpm status check in the funciton - smu_v13_0_5_set_soft_freq_limited_range. Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/pm: Vangogh: Get average_* from average field of gpu_metrics_tableKun Liu
for older BIOS, smu won't fill average field of gpu_metrics_table, so we acquire average_* from current field. but now average value is available in gpu_metrics_v2_4 Signed-off-by: Kun Liu <Kun.Liu2@amd.com> Acked-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/pm: Fixes incorrect type in 'amdgpu_hwmon_show_power_avg() & _input()'Srinivasan Shanmugam
The val is defined as unsigned int type, if(val<0) is invalid, hence modified its type to ssize_t Fixes the below: drivers/gpu/drm/amd/pm/amdgpu_pm.c:2800:5-8: WARNING: Unsigned expression compared with zero: val < 0 drivers/gpu/drm/amd/pm/amdgpu_pm.c:2813:5-8: WARNING: Unsigned expression compared with zero: val < 0 Cc: Guchun Chen <guchun.chen@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/pm: fix error flow in sensor fetchingAlex Deucher
Sensor fetching functions should return an signed int to handle errors properly. Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reported-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amdgpu: Updated TCP/UTCL1 programmingMangesh Gadre
Update TCP/UTCL1 thrashing control settings v2: updated rev_id check Signed-off-by: Mangesh Gadre <Mangesh.Gadre@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amdgpu: Fix kcalloc over kzalloc in 'gmc_v9_0_init_mem_ranges'Srinivasan Shanmugam
Replace kzalloc(n * sizeof(...), ...) with kcalloc(n, sizeof(...), ...) since kcalloc is the preferred API in case of allocating with multiply. Fixes the below: WARNING: Prefer kcalloc over kzalloc with multiply Cc: Guchun Chen <guchun.chen@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/pm: fix debugfs pm_info outputAlex Deucher
Print both input and avg power. Fixes: 47f1724db4fe ("drm/amd: Introduce `AMDGPU_PP_SENSOR_GPU_INPUT_POWER`") Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amdkfd: Share the original BO for GTT mappingPhilip Yang
If mGPUs is on same IOMMU group, or is ram direct mapped, then mGPUs can share the original BO for GTT mapping dma address, without creating new BO from export/import dmabuf. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amdgpu: Fix the return for gpu mode1_resetHawking Zhang
amdgpu_device_mode1_reset will return gpu mode1_reset succeed (ret = 0) as long as wait_for_bootloader call succeed, regardless of the status reported by smu or psp firmware. This results to driver continue executing recovery even smu or psp fail to perform mode1 reset. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: 3.2.248Aric Cyr
This version brings along following fixes: - Ensure FS is enabled before sending request to DMUB for FS changes - Add check for PMFW hard min request complete - Save addr update in scratch before flip - Fix static screen detection setting - Write flip addr to scratch reg for subvp - set minimum of VBlank_nom - Correct unit conversion for vstartup - Roll back unit correction - Enable runtime register offset init for DCN32 DMUB - Refactor edp power control - PQ regamma end point - PQ tail accuracy - Expose mall capability Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: [FW Promotion] Release 0.0.180.0Anthony Koo
- Remove unused flag otg_powered_down Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: ensure FS is enabled before sending request to DMUB for FS ↵Samson Tam
changes [Why] ignore_msa_timing_param indicates FS is capable but not necessarily enabled [How] add check for either allow_freesync or vrr_active_variable to confirm FS is enabled Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Samson Tam <samson.tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: add check for PMFW hard min request completeSamson Tam
[Why] When we issue hard min request to PMFW, the ack back does not guarantee the request has been fulfilled. [How] Add new PMFW message to check if the hard min request has been completed. Returned bit mask indicates which clock requests are completed. Check PMFW version before using message Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Samson Tam <samson.tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: Save addr update in scratch before flipAlvin Lee
[Why & How] Fix a minor sequencing issue where the address update for a subvp flip should be saved in scratch registers before the actual flip Reviewed-by: Austin Zheng <austin.zheng@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amd/display: fix static screen detection settingSungHuai Wang
[WHY] OTG_STATIC_SCREEN_EVENT_MASK is changed in DCN3, but we still follow DCN2 to apply setting for OTG_STATIC_SCREEN_EVENT_MASK. [How] Add new function to apply correct settings for DCN3 series. Reviewed-by: Anthony Koo <anthony.koo@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: SungHuai Wang <danny.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amdgpu: add gfxhub 11.5.0 supportbenl
Add initial gfxhub 11.5 support. Signed-off-by: benl <ben.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amdgpu: enable gmc11 for GC 11.5.0Prike Liang
Add to IP discovery table. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amdgpu: add mmhub 3.3.0 supportLang Yu
Add initial implementation for mmhub 3.3.0. v2: squash in client id fix (Alex) Signed-off-by: Lang Yu <Lang.Yu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amdgpu: add mmhub 3.3.0 headersLang Yu
Add new headers. v2: updates (Alex) Signed-off-by: Lang Yu <Lang.Yu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amdgpu/discovery: enable gfx11 for GC 11.5.0Prike Liang
Add to IP discovery table. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-30drm/amdgpu/discovery: enable mes block for gc 11.5.0Lang Yu
Add to IP discovery table. Signed-off-by: Lang Yu <Lang.Yu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-25 06:39:44 +0000