summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/hfi1/qp.c
AgeCommit message (Collapse)Author
2021-08-25RDMA/hfi1: Convert to SPDX identifierCai Huoqing
use SPDX-License-Identifier instead of a verbose license text Link: https://lore.kernel.org/r/20210823042622.109-1-caihuoqing@baidu.com Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-01-28RDMA/hw/hfi1/qp: Fix some formatting issues and demote kernel-doc abuseLee Jones
Fixes the following W=1 kernel build warning(s): drivers/infiniband/hw/hfi1/qp.c:195: warning: Function parameter or member 'dev' not described in 'verbs_mtu_enum_to_int' drivers/infiniband/hw/hfi1/qp.c:195: warning: Function parameter or member 'mtu' not described in 'verbs_mtu_enum_to_int' drivers/infiniband/hw/hfi1/qp.c:306: warning: Function parameter or member 'qp' not described in 'hfi1_setup_wqe' drivers/infiniband/hw/hfi1/qp.c:306: warning: Function parameter or member 'wqe' not described in 'hfi1_setup_wqe' drivers/infiniband/hw/hfi1/qp.c:306: warning: Function parameter or member 'call_send' not described in 'hfi1_setup_wqe' drivers/infiniband/hw/hfi1/qp.c:922: warning: Function parameter or member 'qp' not described in 'hfi1_qp_iter_cb' drivers/infiniband/hw/hfi1/qp.c:922: warning: Function parameter or member 'v' not described in 'hfi1_qp_iter_cb' Link: https://lore.kernel.org/r/20210126124732.3320971-13-lee.jones@linaro.org Cc: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: linux-rdma@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-11-23IB/hfi1: Fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly adding multiple break statements instead of just letting the code fall through to the next case. Link: https://lore.kernel.org/r/13cc2fe2cf8a71a778dbb3d996b07f5e5d04fd40.1605896059.git.gustavoars@kernel.org Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Tested-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-06Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma updates from Jason Gunthorpe: "A quiet cycle after the larger 5.8 effort. Substantially cleanup and driver work with a few smaller features this time. - Driver updates for hfi1, rxe, mlx5, hns, qedr, usnic, bnxt_re - Removal of dead or redundant code across the drivers - RAW resource tracker dumps to include a device specific data blob for device objects to aide device debugging - Further advance the IOCTL interface, remove the ability to turn it off. Add QUERY_CONTEXT, QUERY_MR, and QUERY_PD commands - Remove stubs related to devices with no pkey table - A shared CQ scheme to allow multiple ULPs to share the CQ rings of a device to give higher performance - Several more static checker, syzkaller and rare crashers fixed" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (121 commits) RDMA/mlx5: Fix flow destination setting for RDMA TX flow table RDMA/rxe: Remove pkey table RDMA/umem: Add a schedule point in ib_umem_get() RDMA/hns: Fix the unneeded process when getting a general type of CQE error RDMA/hns: Fix error during modify qp RTS2RTS RDMA/hns: Delete unnecessary memset when allocating VF resource RDMA/hns: Remove redundant parameters in set_rc_wqe() RDMA/hns: Remove support for HIP08_A RDMA/hns: Refactor hns_roce_v2_set_hem() RDMA/hns: Remove redundant hardware opcode definitions RDMA/netlink: Remove CAP_NET_RAW check when dump a raw QP RDMA/include: Replace license text with SPDX tags RDMA/rtrs: remove WQ_MEM_RECLAIM for rtrs_wq RDMA/rtrs-clt: add an additional random 8 seconds before reconnecting RDMA/cma: Execute rdma_cm destruction from a handler properly RDMA/cma: Remove unneeded locking for req paths RDMA/cma: Using the standard locking pattern when delivering the removal event RDMA/cma: Simplify DEVICE_REMOVAL for internal_id RDMA/efa: Add EFA 0xefa1 PCI ID RDMA/efa: User/kernel compatibility handshake mechanism ...
2020-07-24IB/hfi1: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7-rc7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Link: https://lore.kernel.org/r/20200721133455.GA14363@embeddedor Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-02IB/hfi1: Do not destroy hfi1_wq when the device is shut downKaike Wan
The workqueue hfi1_wq is destroyed in function shutdown_device(), which is called by either shutdown_one() or remove_one(). The function shutdown_one() is called when the kernel is rebooted while remove_one() is called when the hfi1 driver is unloaded. When the kernel is rebooted, hfi1_wq is destroyed while all qps are still active, leading to a kernel crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000102 IP: [<ffffffff94cb7b02>] __queue_work+0x32/0x3e0 PGD 0 Oops: 0000 [#1] SMP Modules linked in: dm_round_robin nvme_rdma(OE) nvme_fabrics(OE) nvme_core(OE) ib_isert iscsi_target_mod target_core_mod ib_ucm mlx4_ib iTCO_wdt iTCO_vendor_support mxm_wmi sb_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm rpcrdma sunrpc irqbypass crc32_pclmul ghash_clmulni_intel rdma_ucm aesni_intel ib_uverbs lrw gf128mul opa_vnic glue_helper ablk_helper ib_iser cryptd ib_umad rdma_cm iw_cm ses enclosure libiscsi scsi_transport_sas pcspkr joydev ib_ipoib(OE) scsi_transport_iscsi ib_cm sg ipmi_ssif mei_me lpc_ich i2c_i801 mei ioatdma ipmi_si dm_multipath ipmi_devintf ipmi_msghandler wmi acpi_pad acpi_power_meter hangcheck_timer ip_tables ext4 mbcache jbd2 mlx4_en sd_mod crc_t10dif crct10dif_generic mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm hfi1(OE) crct10dif_pclmul crct10dif_common crc32c_intel drm ahci mlx4_core libahci rdmavt(OE) igb megaraid_sas ib_core libata drm_panel_orientation_quirks ptp pps_core devlink dca i2c_algo_bit dm_mirror dm_region_hash dm_log dm_mod CPU: 19 PID: 0 Comm: swapper/19 Kdump: loaded Tainted: G OE ------------ 3.10.0-957.el7.x86_64 #1 Hardware name: Phegda X2226A/S2600CW, BIOS SE5C610.86B.01.01.0024.021320181901 02/13/2018 task: ffff8a799ba0d140 ti: ffff8a799bad8000 task.ti: ffff8a799bad8000 RIP: 0010:[<ffffffff94cb7b02>] [<ffffffff94cb7b02>] __queue_work+0x32/0x3e0 RSP: 0018:ffff8a90dde43d80 EFLAGS: 00010046 RAX: 0000000000000082 RBX: 0000000000000086 RCX: 0000000000000000 RDX: ffff8a90b924fcb8 RSI: 0000000000000000 RDI: 000000000000001b RBP: ffff8a90dde43db8 R08: ffff8a799ba0d6d8 R09: ffff8a90dde53900 R10: 0000000000000002 R11: ffff8a90dde43de8 R12: ffff8a90b924fcb8 R13: 000000000000001b R14: 0000000000000000 R15: ffff8a90d2890000 FS: 0000000000000000(0000) GS:ffff8a90dde40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000102 CR3: 0000001a70410000 CR4: 00000000001607e0 Call Trace: [<ffffffff94cb8105>] queue_work_on+0x45/0x50 [<ffffffffc03f781e>] _hfi1_schedule_send+0x6e/0xc0 [hfi1] [<ffffffffc03f78a2>] hfi1_schedule_send+0x32/0x70 [hfi1] [<ffffffffc02cf2d9>] rvt_rc_timeout+0xe9/0x130 [rdmavt] [<ffffffff94ce563a>] ? trigger_load_balance+0x6a/0x280 [<ffffffffc02cf1f0>] ? rvt_free_qpn+0x40/0x40 [rdmavt] [<ffffffff94ca7f58>] call_timer_fn+0x38/0x110 [<ffffffffc02cf1f0>] ? rvt_free_qpn+0x40/0x40 [rdmavt] [<ffffffff94caa3bd>] run_timer_softirq+0x24d/0x300 [<ffffffff94ca0f05>] __do_softirq+0xf5/0x280 [<ffffffff9537832c>] call_softirq+0x1c/0x30 [<ffffffff94c2e675>] do_softirq+0x65/0xa0 [<ffffffff94ca1285>] irq_exit+0x105/0x110 [<ffffffff953796c8>] smp_apic_timer_interrupt+0x48/0x60 [<ffffffff95375df2>] apic_timer_interrupt+0x162/0x170 <EOI> [<ffffffff951adfb7>] ? cpuidle_enter_state+0x57/0xd0 [<ffffffff951ae10e>] cpuidle_idle_call+0xde/0x230 [<ffffffff94c366de>] arch_cpu_idle+0xe/0xc0 [<ffffffff94cfc3ba>] cpu_startup_entry+0x14a/0x1e0 [<ffffffff94c57db7>] start_secondary+0x1f7/0x270 [<ffffffff94c000d5>] start_cpu+0x5/0x14 The solution is to destroy the workqueue only when the hfi1 driver is unloaded, not when the device is shut down. In addition, when the device is shut down, no more work should be scheduled on the workqueues and the workqueues are flushed. Fixes: 8d3e71136a08 ("IB/{hfi1, qib}: Add handling of kernel restart") Link: https://lore.kernel.org/r/20200623204047.107638.77646.stgit@awfm-01.aw.intel.com Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-02IB/hfi1: Add explicit cast OPA_MTU_8192 to 'enum ib_mtu'Nathan Chancellor
Clang warns: drivers/infiniband/hw/hfi1/qp.c:198:9: warning: implicit conversion from enumeration type 'enum opa_mtu' to different enumeration type 'enum ib_mtu' [-Wenum-conversion] mtu = OPA_MTU_8192; ~ ^~~~~~~~~~~~ enum opa_mtu extends enum ib_mtu. There are typically two ways to deal with this: * Remove the expected types and just use 'int' for all parameters and types. * Explicitly cast the enums between each other. This driver chooses to do the later so do the same thing here. Fixes: 6d72344cf6c4 ("IB/ipoib: Increase ipoib Datagram mode MTU's upper limit") Link: https://lore.kernel.org/r/20200623005224.492239-1-natechancellor@gmail.com Link: https://github.com/ClangBuiltLinux/linux/issues/1062 Link: https://lore.kernel.org/linux-rdma/20200527040350.GA3118979@ubuntu-s3-xlarge-x86/ Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-05-21IB/ipoib: Increase ipoib Datagram mode MTU's upper limitKaike Wan
Currently the ipoib UD mtu is restricted to 4K bytes. Remove this limitation so that the IPOIB module can potentially use an MTU (in UD mode) that is bounded by the MTU of the underlying device. A field is added to the ib_port_attr structure to indicate the maximum physical MTU the underlying device supports. Link: https://lore.kernel.org/r/20200511160618.173205.23053.stgit@awfm-01.aw.intel.com Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/{rdmavt, hfi1, qib}: Add helpers to hide SWQE WR detailsMichael J. Ruhl
Add some helper functions to hide struct rvt_swqe details. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/{rdmavt, hfi1, qib}: Remove AH refcount for UD QPsMichael J. Ruhl
Historically rdmavt destroy_ah() has returned an -EBUSY when the AH has a non-zero reference count. IBTA 11.2.2 notes no such return value or error case: Output Modifiers: - Verb results: - Operation completed successfully. - Invalid HCA handle. - Invalid address handle. ULPs never test for this error and this will leak memory. The reference count exists to allow for driver independent progress mechanisms to process UD SWQEs in parallel with post sends. The SWQE will hold a reference count until the UD SWQE completes and then drops the reference. Fix by removing need to reference count the AH. Add a UD specific allocation to each SWQE entry to cache the necessary information for independent progress. Copy the information during the post send processing. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28IB/hfi1: Move rvt_cq_wc struct into uapi directoryKamenee Arumugam
The rvt_cq_wc struct elements are shared between rdmavt and the providers but not in uapi directory. As per the comment in https://marc.info/?l=linux-rdma&m=152296522708522&w=2 The hfi1 driver and the rdma core driver are not using shared structures in the uapi directory. In that case, move rvt_cq_wc struct into the rvt-abi.h header file and create a rvt_k_cq_w for the kernel completion queue. Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-03Merge HFI1 updates into k.o/for-nextJason Gunthorpe
Based on rdma.git for-rc for dependencies. From Dennis Dalessandro: ==================== Here are some code improvement patches and fixes for less serious bugs to TID RDMA than we sent for RC. ==================== * HFI1 updates: IB/hfi1: Implement CCA for TID RDMA protocol IB/hfi1: Remove WARN_ON when freeing expected receive groups IB/hfi1: Unify the software PSN check for TID RDMA READ/WRITE IB/hfi1: Add a function to read next expected psn from hardware flow IB/hfi1: Delay the release of destination mr for TID RDMA WRITE DATA Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-27IB/hfi1: Clear the IOWAIT pending bits when QP is put into error stateKaike Wan
When a QP is put into error state, it may be waiting for send engine resources. In this case, the QP will be removed from the send engine's waiting list, but its IOWAIT pending bits are not cleared. This will normally not have any major impact as the QP is being destroyed. However, the QP still needs to wind down its operations, such as draining the send queue by scheduling the send engine. Clearing the pending bits will avoid any potential complications. In addition, if the QP will eventually hang, clearing the pending bits can help debugging by presenting a consistent picture if the user dumps the qp_stats. This patch clears a QP's IOWAIT_PENDING_IB and IO_PENDING_TID bits in priv->s_iowait.flags in this case. Fixes: 5da0fc9dbf89 ("IB/hfi1: Prepare resource waits for dual leg") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-27IB/hfi1: Failed to drain send queue when QP is put into error stateKaike Wan
When a QP is put into error state, all pending requests in the send work queue should be drained. The following sequence of events could lead to a failure, causing a request to hang: (1) The QP builds a packet and tries to send through SDMA engine. However, PIO engine is still busy. Consequently, this packet is put on the QP's tx list and the QP is put on the PIO waiting list. The field qp->s_flags is set with HFI1_S_WAIT_PIO_DRAIN; (2) The QP is put into error state by the user application and notify_error_qp() is called, which removes the QP from the PIO waiting list and the packet from the QP's tx list. In addition, qp->s_flags is cleared of RVT_S_ANY_WAIT_IO bits, which does not include HFI1_S_WAIT_PIO_DRAIN bit; (3) The hfi1_schdule_send() function is called to drain the QP's send queue. Subsequently, hfi1_do_send() is called. Since the flag bit HFI1_S_WAIT_PIO_DRAIN is set in qp->s_flags, hfi1_send_ok() fails. As a result, hfi1_do_send() bails out without draining any request from the send queue; (4) The PIO engine completes the sending and tries to wake up any QP on its waiting list. But the QP has been removed from the PIO waiting list and therefore is kept in sleep forever. The fix is to clear qp->s_flags of HFI1_S_ANY_WAIT_IO bits in step (2). HFI1_S_ANY_WAIT_IO includes RVT_S_ANY_WAIT_IO and HFI1_S_WAIT_PIO_DRAIN. Fixes: 2e2ba09e48b7 ("IB/rdmavt, IB/hfi1: Create device dependent s_flags") Cc: <stable@vger.kernel.org> # 4.19.x+ Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-26IB/hfi1: Add running average for adaptive pioMike Marciniszyn
The adaptive PIO implementation only considers the current packet size when deciding between SDMA and pio for a packet. This causes credit return forces if small and large packets are interleaved. Add a running average to avoid costly credit forces so that a large sequence of small packets is required to go below the threshold that chooses pio. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-15IB/hfi1: Fix a build warning for TID RDMA READKaike Wan
The following build warning was produced for the TID RDMA READ patch ("IB/hfi1: Enable TID RDMA READ protocol"): drivers/infiniband/hw/hfi1/qp.c: In function 'hfi1_setup_wqe': drivers/infiniband/hw/hfi1/qp.c:328:3: warning: this statement may fall through [-Wimplicit-fallthrough=] hfi1_setup_tid_rdma_wqe(qp, wqe); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/infiniband/hw/hfi1/qp.c:329:2: note: here case IB_QPT_UC: ^~~~ This patch will fix the issue by adding the "fall through" comment. Fixes: f1ab4efa6d32 ("IB/hfi1: Enable TID RDMA READ protocol") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-05IB/hfi1: Prioritize the sending of ACK packetsKaike Wan
ACK packets are generally associated with request completion and resource release and therefore should be sent first. This patch optimizes the send engine by using the following policies: (1) QPs with RVT_S_ACK_PENDING bit set in qp->s_flags or qpriv->s_flags should have their priority incremented; (2) QPs with ACK or TID-ACK packet queued should have their priority incremented; (3) When a QP is queued to the wait list due to resource constraints, it will be queued to the head if it has ACK packet to send; (4) When selecting qps to run from the wait list, the one with the highest priority and starve_cnt will be selected; each priority will be equivalent to a fixed number of starve_cnt (16). Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-02-05IB/hfi1: Add TID RDMA WRITE functionality into RDMA verbsKaike Wan
This patch integrates TID RDMA WRITE protocol into normal RDMA verbs framework. The TID RDMA WRITE protocol is an end-to-end protocol between the hfi1 drivers on two OPA nodes that converts a qualified RDMA WRITE request into a TID RDMA WRITE request to avoid data copying on the responder side. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-02-05IB/hfi1: Add the dual leg codeKaike Wan
The "Second Leg" of the TID RDMA WRITE protocol deals with the transfer of data and ack packets, which are in the KDETH PSN space, as opposed to the IB PSN space. Therefore, the Second Leg could be considered as a separate state machine. As such, it is handled by a different work queue item which is scheduled along with the normal IB state machine work item. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-02-05IB/hfi1: Add TID resource timerKaike Wan
This patch adds the TID resource timer, which is used by the responder to free any TID resources that are allocated for TID RDMA WRITE request and not returned by the requester after a reasonable time. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-02-05IB/hfi1: Enable TID RDMA READ protocolKaike Wan
This patch enables TID RDMA READ protocol by converting a qualified RDMA READ request into a TID RDMA READ request internally: (1) The TID RDMA capability must be enabled; (2) The request must start on a 4K page boundary and all receiving buffers must start on 4K page boundaries; (3) The request length must be a multiple of 4K and must be larger or equal to 256K. Each receiving buffer length must be a multiple of 4K. Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-02-05IB/hfi1: Integrate TID RDMA READ protocol into RC protocolKaike Wan
This patch integrates the TID RDMA READ protocol into the IB RC protocol. This protocol is an end-to-end protocol between the hfi1 drivers on two OPA nodes that converts a qualified RDMA READ request into a TID RDMA READ request to avoid data copying on the requester side. The following codes are added in this patch: - Send the TID RDMA READ request; - Complete the TID RDMA READ send request; - Send the TID RDMA READ response; - Complete the TID RDMA READ request; Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-02-05IB/hfi1: TID RDMA flow allocationKaike Wan
The hfi1 hardware flow is a hardware flow-control mechanism for a KDETH data packet that is received on a hfi1 port. It validates the packet by checking both the generation and sequence. Each QP that uses the TID RDMA mechanism will allocate a hardware flow from its receiving context for any incoming KDETH data packets. This patch implements: (1) a function to allocate hardware flow (2) a function to free hardware flow (3) a function to initialize hardware flow generation for a receiving context (4) a wait mechanism if the hardware flow is not available (4) a function to remove the qp from the wait queue for hardware flow when the qp is reset or destroyed. Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-01-31IB/hfi1: Integrate OPFN into RC transactionsKaike Wan
OPFN parameter negotiation allows a pair of connected RC QPs to exchange a set of parameters in succession. This negotiation does not commence till the first ULP request. Because OPFN operations are operations private to the driver, they do not generate user completions or put the QP into error when they run out of retries. This patch integrates the OPFN protocol into the transactions of an RC QP. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-12-28Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma updates from Jason Gunthorpe: "This has been a fairly typical cycle, with the usual sorts of driver updates. Several series continue to come through which improve and modernize various parts of the core code, and we finally are starting to get the uAPI command interface cleaned up. - Various driver fixes for bnxt_re, cxgb3/4, hfi1, hns, i40iw, mlx4, mlx5, qib, rxe, usnic - Rework the entire syscall flow for uverbs to be able to run over ioctl(). Finally getting past the historic bad choice to use write() for command execution - More functional coverage with the mlx5 'devx' user API - Start of the HFI1 series for 'TID RDMA' - SRQ support in the hns driver - Support for new IBTA defined 2x lane widths - A big series to consolidate all the driver function pointers into a big struct and have drivers provide a 'static const' version of the struct instead of open coding initialization - New 'advise_mr' uAPI to control device caching/loading of page tables - Support for inline data in SRPT - Modernize how umad uses the driver core and creates cdev's and sysfs files - First steps toward removing 'uobject' from the view of the drivers" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (193 commits) RDMA/srpt: Use kmem_cache_free() instead of kfree() RDMA/mlx5: Signedness bug in UVERBS_HANDLER() IB/uverbs: Signedness bug in UVERBS_HANDLER() IB/mlx5: Allocate the per-port Q counter shared when DEVX is supported IB/umad: Start using dev_groups of class IB/umad: Use class_groups and let core create class file IB/umad: Refactor code to use cdev_device_add() IB/umad: Avoid destroying device while it is accessed IB/umad: Simplify and avoid dynamic allocation of class IB/mlx5: Fix wrong error unwind IB/mlx4: Remove set but not used variable 'pd' RDMA/iwcm: Don't copy past the end of dev_name() string IB/mlx5: Fix long EEH recover time with NVMe offloads IB/mlx5: Simplify netdev unbinding IB/core: Move query port to ioctl RDMA/nldev: Expose port_cap_flags2 IB/core: uverbs copy to struct or zero helper IB/rxe: Reuse code which sets port state IB/rxe: Make counters thread safe IB/mlx5: Use the correct commands for UMEM and UCTX allocation ...
2018-12-06IB/hfi1: Reduce lock contention on iowait_lock for sdma and pioMike Marciniszyn
Commit 4e045572e2c2 ("IB/hfi1: Add unique txwait_lock for txreq events") laid the ground work to support per resource waiting locking. This patch adds that with a lock unique to each sdma engine and pio sendcontext and makes necessary changes for verbs, PSM, and vnic to use the new locks. This is particularly beneficial for smaller messages that will exhaust resources at a faster rate. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Gary Leshner <Gary.S.Leshner@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-03IB/hfi1: Fix a latency issue for small messagesMichael J. Ruhl
A recent performance enhancement introduced a latency issue in the HFI message path. The new algorithm removed a forced call send for PIO messages and added a forced schedule event for messages larger than the MTU. For PIO, the schedule path can introduce thrashing that can significantly impact the throughput for small messages. If a message size is within the PIO threshold, always take the send path. Fixes: 0b79b27748cb ("IB/{hfi1, qib, rdmavt}: Schedule multi RC/UC packets instead of posting") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-09-30IB/hfi1: Use VL15 for SM packetsKaike Wan
Subnet Management Packets (SMP) should exclusively use VL15 and their SL is ignored (IBTA v1.3, Section 3.5.8.2). Therefore, when an SMP is posted, the SL in the address handle can be set to 0 by a user application. Consequently, when an address handle is created by the IB core, some fields in struct rvt_ah may not be set correctly by using the SL2SC and SC2VL tables at the time. Subsequently, when the request is post sent, the incoming swqe may fail the validation check, resulting in the rejection of the send request. This patch fixes the problem by using VL15 for any validation, ignoring the SL in the address handle. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-30IB/hfi1: Prepare resource waits for dual legDennis Dalessandro
Current implementation allows each qp to have only one send engine. As such, each qp has only one list to queue prebuilt packets when send engine resources are not available. To improve performance, it is desired to support multiple send engines for each qp. This patch creates the framework to support two send engines (two legs) for each qp for the TID RDMA protocol, which can be easily extended to support more send engines. It achieves the goal by creating a leg specific struct, iowait_work in the iowait struct, to hold the work_struct and the tx_list as well as a pointer to the parent iowait struct. The hfi1_pkt_state now has an additional field to record the current legs work structure and that is now passed to all egress waiters to determine the leg that needs to wait via a new iowait helper. The APIs are adjusted to use the new leg specific struct as required. Many new and modified helpers are added to support this change. Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-30IB/rdmavt: Rename check_send_wqe as setup_wqeKaike Wan
The driver-provided function check_send_wqe allows the hardware driver to check and set up the incoming send wqe before it is inserted into the swqe ring. This patch will rename it as setup_wqe to better reflect its usage. In addition, this function is only called when all setup is complete in rdmavt. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-11IB/{hfi1, qib, rdmavt}: Schedule multi RC/UC packets instead of postingMichael J. Ruhl
The post_send() path determines if it should post directly or, schedule the post for later. The current logic is: if the swqe ring is empty or (for hfi1) wqe->length <= piothreshold post the send else schedule This can allow large requests to call the send engine directly. Large requests can potentially produce a large number of packets prior to returning to the caller, blocking the caller from posting more requests, and allowing better parallel processing. Allow the driver(s) more say in this logic (pass call_send to the driver, rather than examining a return value). Update hfi1/qib logic to schedule the send engine if an RC or UC message is larger than the QP MTU size. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-19IB/rdmavt, IB/hfi1: Create device dependent s_flagsMike Marciniszyn
Move some s_flags defines out of rdmavt and into hfi1 because they are hfi1 specific and therefore should remain in the driver instead of bubbling up to rdmavt. Document device specific ranges in rdmavt and remap those in hfi1. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-13IB/hfi1: Fix a kernel-doc warningBart Van Assche
Avoid that building with W=1 causes the following warning to appear: drivers/infiniband/hw/hfi1/qp.c:484: warning: Cannot understand * on line 484 - I thought it was a doc line Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-02-01IB/hfi1: Remove dependence on qp->s_hdrwordsMitko Haralanov
The s_hdrwords variable was used to indicate whether a packet was already built on a previous iteration of the send engine. This variable assumed the protection of the QP's RVT_S_BUSY flag, which was required since the the QP's s_lock was dropped just prior to the packet being queued on the one of the egress mechanisms. Support for multiple send engine instantiations require that the field not be used due to concurency issues. The ps.txreq signals the "already built" without the potential concurency issues. Fix by getting rid of all s_hdrword usage. A wrapper is added to test for the already built case that used to use s_hdrwords. What used to be stored in s_hdrwords is now in the txreq. The PBC is not counted, but is added in the pio/sdma code paths prior to posting the packet. Reviewed-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-03IB/hfi1: Add RQ/SRQ information to QP statsMichael J. Ruhl
When debugging issues with RC QPs, it is useful to know if a QP has an associated RQ or SRQ, the size of the RQ, and any RNR timeout values. Add the necessary information to the QP stats output. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-08-28IB/hfi1: Convert qp_stats debugfs interface to use new iterator APIMike Marciniszyn
Continue moving copy/paste code into rdmavt. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-28IB/hfi1: Convert hfi1_error_port_qps() to use new QP iteratorMike Marciniszyn
Change hfi1_error_port_qps() to use the new rvt_qp_iter() in its QP scanning. Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-28IB/hfi1: Use accessor to determine ring sizeKaike Wan
The qp_stats print will soon be moving to rdmavt, so use the proper accessor to get the ring size rather than a driver supplied constant. Fixes: Commit ff8d836efe06 ("IB/hfi1: Add receiving queue info to qp_stats") Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-28IB/hfi1: Add opcode states to qp_statsMike Marciniszyn
These fields allow for debugging send engine processing. Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-28IB/hfi1: Add received request info to qp_statsKaike Wan
The rvt_ack_entry pointed to by s_tail_ack_queue provides important info about the request that has just been processed or is being processed on the responder side of a RC connection. This patch adds this info to the qp_stats to assist debugging. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-22IB/hfi1: Determine 9B/16B L2 header type based on Address handleDon Hiatt
When address handle attributes are initialized, the LIDs are transformed to be in the 32 bit LID space. When constructing the header, hfi1 driver will look at the LID to determine the packet header to be created. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-31IB/hfi1: Serve the most starved iowait entry firstKaike Wan
When an egress resource(SDMA descriptors, pio credits) is not available, a sending thread will be put on the resource's wait queue. When the resource becomes available again, up to a fixed number of sending threads can be awakened sequentially and removed from the wait queue, depending on the number of waiting threads and the number of free resources. Since each awakened sending thread will send as many packets as possible, it is highly likely that the first sending thread will consume all the egress resources. Subsequently, it will be put back to the end of the wait queue. Depending on the timing when the later sending threads wake up, they may not be able to send any packet and be again put back to the end of the wait queue sequentially, right behind the first sending thread. This starvation cycle continues until some sending threads exceed their retry limit and consequently fail. This patch fixes the issue by two simple approaches: (1) Any starved sending thread will be put to the head of the wait queue while a served sending thread will be put to the tail; (2) The most starved sending thread will be served first. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-27Merge branch 'misc' into k.o/for-nextDoug Ledford
2017-07-24IB/hfi1: Add receiving queue info to qp_statsKaike Wan
This patch adds qp->s_ack_queue indices and size to qp_stats printout. This information will provide information about the receiving side. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-24Merge branch 'hfi1' into k.o/for-4.14Doug Ledford
2017-07-17IB/{rdmavt, qib, hfi1}: Remove gfp flags argumentLeon Romanovsky
The caller to the driver marks GFP_NOIO allocations with help of memalloc_noio-* calls now. This makes redundant to pass down to the driver gfp flags, which can be GFP_KERNEL only. The patch removes the gfp flags argument and updates all driver paths. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Remove unused mk_qpn functionIra Weiny
Leftover function that is not used. Remove it. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-04IB/hfi1, IB/rdmavt: Move r_adefered to r_lock cache lineMike Marciniszyn
This field is causing excessive cache line bouncing. There are spare bytes in the r_lock cache line so the best approach is to make an rvt QP field and remove from the hfi1 priv field. Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-01IB/core: Use rdma_ah_attr accessor functionsDasaratharaman Chandramouli
Modify core and driver components to use accessor functions introduced to access individual fields of rdma_ah_attr Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-02-19IB/hfi1: Use new rdmavt timersVenkata Sandeep Dhanalakota
Reduce hfi1 code footprint by using the rdmavt timers. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-27 21:12:24 +0000