summaryrefslogtreecommitdiff
path: root/drivers/mmc/host
AgeCommit message (Collapse)Author
2022-09-27mmc: hsq: Fix data stomping during mmc recoveryWenchao Chen
The block device uses multiple queues to access emmc. There will be up to 3 requests in the hsq of the host. The current code will check whether there is a request doing recovery before entering the queue, but it will not check whether there is a request when the lock is issued. The request is in recovery mode. If there is a request in recovery, then a read and write request is initiated at this time, and the conflict between the request and the recovery request will cause the data to be trampled. Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com> Fixes: 511ce378e16f ("mmc: Add MMC host software queue support") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220916090506.10662-1-wenchao.chen666@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-09-14mmc: moxart: fix 4-bit bus width and remove 8-bit bus widthSergei Antonov
According to the datasheet [1] at page 377, 4-bit bus width is turned on by bit 2 of the Bus Width Register. Thus the current bitmask is wrong: define BUS_WIDTH_4 BIT(1) BIT(1) does not work but BIT(2) works. This has been verified on real MOXA hardware with FTSDC010 controller revision 1_6_0. The corrected value of BUS_WIDTH_4 mask collides with: define BUS_WIDTH_8 BIT(2). Additionally, 8-bit bus width mode isn't supported according to the datasheet, so let's remove the corresponding code. [1] https://bitbucket.org/Kasreyn/mkrom-uc7112lx/src/master/documents/FIC8120_DS_v1.2.pdf Fixes: 1b66e94e6b99 ("mmc: moxart: Add MOXA ART SD/MMC driver") Signed-off-by: Sergei Antonov <saproj@gmail.com> Cc: Jonas Jensen <jonas.jensen@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220907205753.1577434-1-saproj@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-09-14mmc: sdhci: Fix host->cmd is nullWenchao Chen
When data crc occurs, the kernel will panic because host->cmd is null. Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com> Fixes: efe8f5c9b5e1 ("mmc: sdhci: Capture eMMC and SD card errors") Cc: stable@vger.kernel.org Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20220907035847.13783-1-wenchao.chen666@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-08-23Merge tag 'linux-kselftest-kunit-fixes-6.0-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit fixes from Shuah Khan: "Fix for a mmc test and to load .kunit_test_suites section when CONFIG_KUNIT=m, and not just when KUnit is built-in" * tag 'linux-kselftest-kunit-fixes-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: module: kunit: Load .kunit_test_suites section when CONFIG_KUNIT=m mmc: sdhci-of-aspeed: test: Fix dependencies when KUNIT=m
2022-08-15mmc: sdhci-of-aspeed: test: Fix dependencies when KUNIT=mDavid Gow
While the sdhci-of-aspeed KUnit tests do work when builtin, and do work when KUnit itself is being built as a module, the two together break. This is because the KUnit tests (understandably) depend on KUnit, so a built-in test cannot build if KUnit is a module. Fix this by adding a dependency on (MMC_SDHCI_OF_ASPEED=m || KUNIT=y), which only excludes this one problematic configuration. This was reported on a nasty openrisc-randconfig run by the kernel test robot, though for some reason (compiler optimisations removing the test code?) I wasn't able to reproduce it locally on x86: https://lore.kernel.org/linux-mm/202207140122.fzhlf60k-lkp@intel.com/T/ Fixes: 291cd54e5b05 ("mmc: sdhci-of-aspeed: test: Use kunit_test_suite() macro") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David Gow <davidgow@google.com> Acked-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-08-15mmc: sdhci-of-dwcmshc: Re-enable support for the BlueField-3 SoCLiming Sun
The commit 08f3dff799d4 (mmc: sdhci-of-dwcmshc: add rockchip platform support") introduces the use of_device_get_match_data() to check for some chips. Unfortunately, it also breaks the BlueField-3 FW, which uses ACPI. To fix the problem, let's add the ACPI match data and the corresponding quirks to re-enable the support for the BlueField-3 SoC. Reviewed-by: David Woods <davwoods@nvidia.com> Signed-off-by: Liming Sun <limings@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: 08f3dff799d4 ("mmc: sdhci-of-dwcmshc: add rockchip platform support") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220809173742.178440-1-limings@nvidia.com [Ulf: Clarified the commit message a bit] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-08-15mmc: meson-gx: Fix an error handling path in meson_mmc_probe()Christophe JAILLET
The commit in Fixes has introduced a new error handling which should goto the existing error handling path. Otherwise some resources leak. Fixes: 19c6beaa064c ("mmc: meson-gx: add device reset") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/be4b863bacf323521ba3a02efdc4fca9cdedd1a6.1659855351.git.christophe.jaillet@wanadoo.fr Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-08-15mmc: mtk-sd: Clear interrupts when cqe off/disableWenbin Mei
Currently we don't clear MSDC interrupts when cqe off/disable, which led to the data complete interrupt will be reserved for the next command. If the next command with data transfer after cqe off/disable, we process the CMD ready interrupt and trigger DMA start for data, but the data complete interrupt is already exists, then SW assume that the data transfer is complete, SW will trigger DMA stop, but the data may not be transmitted yet or is transmitting, so we may encounter the following error: mtk-msdc 11230000.mmc: CMD bus busy detected. Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com> Fixes: 88bd652b3c74 ("mmc: mediatek: command queue support") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220728080048.21336-1-wenbin.mei@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-08-15mmc: pxamci: Fix another error handling path in pxamci_probe()Christophe JAILLET
The commit in Fixes: has introduced an new error handling without branching to the existing error handling path. Update it now and release some resources if pxamci_init_ocr() fails. Fixes: 61951fd6cb49 ("mmc: pxamci: let mmc core handle regulators") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/07a2dcebf8ede69b484103de8f9df043f158cffd.1658862932.git.christophe.jaillet@wanadoo.fr Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-08-15mmc: pxamci: Fix an error handling path in pxamci_probe()Christophe JAILLET
The commit in Fixes: has moved some code around without updating gotos to the error handling path. Update it now and release some resources if pxamci_of_init() fails. Fixes: fa3a5115469c ("mmc: pxamci: call mmc_of_parse()") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/6d75855ad4e2470e9ed99e0df21bc30f0c925a29.1658862932.git.christophe.jaillet@wanadoo.fr Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-08-04Merge tag 'mmc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "MMC core: - Add support for the asynchronous SDIO wakeup interrupts - Skip redundant evaluation of eMMC HS400 caps when no-MMC-cap - Add support to store error stats from host drivers - Extend debugfs to show error stats from host drivers - Add single I/O read support in the recovery path for 4k sector cards MMC host: - dw_mmc-exynos: Convert corresponding DT bindings to the dtschema - dw_mmc-rockchip: Add support for the Rockchip RV1126 variant - mmc_spi: Convert corresponding DT bindings to the dtschema - mtk-sd: Extend support for interrupts/pinctrls for SDIO low-power mode - mtk-sd: Add support for SDIO wake irqs - mtk-sd: Add support for the Mediatek MT8188 variant - renesas_sdhi: Drop redundant manual tap correction for newer SoCs - renesas_sdhi: Add support for the R-Car S4-8 and generic Gen4 variants - sdhci/cqhci: Add support to capture stats from host errors - sdhci-brcmstb: Add ability to increase max clock rate for SDIO on 72116b0 - sdhci-msm: Add support for the MSM8998 and SM8450 variant - sdhci-of-at91: Fixup UHS-I mode by rewriting of MC1R - sdhci-of-dwcmshc: Add support for the Rockchip rk3588 variant - sdhci-of-dwcmshc: Enable reset support for the Rockchip variants - sdhci-pci-gli: Improve I/O read/write performance for GL9763E - sdhci-s3c: Convert corresponding DT bindings to the dtschema - tmio: Avoid glitches when resetting MEMSTICK core: - A couple of minor fixes and cleanups" * tag 'mmc-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (61 commits) mmc: mediatek: add support for SDIO eint wakup IRQ mmc: core: Add support for SDIO wakeup interrupt dt-bindings: mmc: mtk-sd: extend interrupts and pinctrls properties dt-bindings: mmc: rockchip-dw-mshc: Document Rockchip RV1126 mmc: renesas_sdhi: newer SoCs don't need manual tap correction mmc: cavium-thunderx: Add of_node_put() when breaking out of loop mmc: cavium-octeon: Add of_node_put() when breaking out of loop mmc: core: quirks: Add of_node_put() when breaking out of loop mmc: sdhci-brcmstb: use clk_get_rate(base_clk) in PM resume dt-bindings: mmc: sdhci-msm: Document the SM8450 compatible mmc: sdhci-msm: drop redundant of_device_id entries dt-bindings: mmc: sdhci-msm: add MSM8998 mmc: block: Add single read for 4k sector cards mmc: mxcmmc: Use mmc_card_sdio macro mmc: core: Use mmc_card_* macro and add a new for the sd_combo type dt-bindings: mmc: sdhci-msm: constrain reg-names per variants dt-bindings: mmc: sdhci-msm: fix reg-names entries dt-bindings: mmc: Add compatible for MediaTek MT8188 dt-bindings: mmc: sdhci-msm: document resets mmc: sdhci-of-at91: fix set_uhs_signaling rewriting of MC1R ...
2022-08-04Merge tag 'spdx-6.0-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here is the set of SPDX comment updates for 6.0-rc1. Nothing huge here, just a number of updated SPDX license tags and cleanups based on the review of a number of common patterns in GPLv2 boilerplate text. Also included in here are a few other minor updates, two USB files, and one Documentation file update to get the SPDX lines correct. All of these have been in the linux-next tree for a very long time" * tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits) Documentation: samsung-s3c24xx: Add blank line after SPDX directive x86/crypto: Remove stray comment terminator treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1) treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE ...
2022-08-02Merge tag 'linux-kselftest-kunit-5.20-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit updates from Shuah Khan: "This consists of several fixes and an important feature to discourage running KUnit tests on production systems. Running tests on a production system could leave the system in a bad state. Summary: - Add a new taint type, TAINT_TEST to signal that a test has been run. This should discourage people from running these tests on production systems, and to make it easier to tell if tests have been run accidentally (by loading the wrong configuration, etc) - Several documentation and tool enhancements and fixes" * tag 'linux-kselftest-kunit-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (29 commits) Documentation: KUnit: Fix example with compilation error Documentation: kunit: Add CLI args for kunit_tool kcsan: test: Add a .kunitconfig to run KCSAN tests kunit: executor: Fix a memory leak on failure in kunit_filter_tests clk: explicitly disable CONFIG_UML_PCI_OVER_VIRTIO in .kunitconfig mmc: sdhci-of-aspeed: test: Use kunit_test_suite() macro nitro_enclaves: test: Use kunit_test_suite() macro thunderbolt: test: Use kunit_test_suite() macro kunit: flatten kunit_suite*** to kunit_suite** in .kunit_test_suites kunit: unify module and builtin suite definitions selftest: Taint kernel when test module loaded module: panic: Taint the kernel when selftest modules load Documentation: kunit: fix example run_kunit func to allow spaces in args Documentation: kunit: Cleanup run_wrapper, fix x-ref kunit: test.h: fix a kernel-doc markup kunit: tool: Enable virtio/PCI by default on UML kunit: tool: make --kunitconfig repeatable, blindly concat kunit: add coverage_uml.config to enable GCOV on UML kunit: tool: refactor internal kconfig handling, allow overriding kunit: tool: introduce --qemu_args ...
2022-07-29Merge branch 'acpi-bus'Rafael J. Wysocki
Merge ACPI device object management changes for v5.20-rc1. - Use the facilities provided by the driver core and some additional helpers to handle the children of a given ACPI device object in multiple places instead of using the children and node list heads in struct acpi_device which is error prone (Rafael Wysocki). - Fix ACPI-related device reference counting issue in the hisi_lpc bus driver (Yang Yingliang). - Drop the children and node list heads that are not needed any more from struct acpi_device (Rafael Wysocki). - Drop driver member from struct acpi_device (Uwe Kleine-König). - Drop redundant check from acpi_device_remove() (Uwe Kleine-König). * acpi-bus: ACPI: bus: Drop unused list heads from struct acpi_device hisi_lpc: Use acpi_dev_for_each_child() bus: hisi_lpc: fix missing platform_device_put() in hisi_lpc_acpi_probe() ACPI: bus: Drop driver member of struct acpi_device ACPI: bus: Drop redundant check in acpi_device_remove() mfd: core: Use acpi_dev_for_each_child() ACPI / MMC: PM: Unify fixing up device power soundwire: Use acpi_dev_for_each_child() platform/x86/thinkpad_acpi: Use acpi_dev_for_each_child() ACPI: scan: Walk ACPI device's children using driver core ACPI: bus: Introduce acpi_dev_for_each_child_reverse() ACPI: video: Use acpi_dev_for_each_child() ACPI: bus: Export acpi_dev_for_each_child() to modules ACPI: property: Use acpi_dev_for_each_child() for child lookup ACPI: container: Use acpi_dev_for_each_child() USB: ACPI: Replace usb_acpi_find_port() with acpi_find_child_by_adr() thunderbolt: ACPI: Replace tb_acpi_find_port() with acpi_find_child_by_adr() ACPI: glue: Introduce acpi_find_child_by_adr() ACPI: glue: Introduce acpi_dev_has_children() ACPI: glue: Use acpi_dev_for_each_child()
2022-07-26mmc: mediatek: add support for SDIO eint wakup IRQAxe Yang
Add support for eint IRQ when MSDC is used as an SDIO host. This feature requires SDIO device support async IRQ function. With this feature, SDIO host can be awakened by SDIO card in suspend state, without additional pin. MSDC driver will time-share the SDIO DAT1 pin. During suspend, MSDC turn off clock and switch SDIO DAT1 pin to GPIO mode. And during resume, switch GPIO function back to DAT1 mode then turn on clock. Some device tree property should be added or modified in MSDC node to support SDIO eint IRQ. Pinctrls "state_eint" is mandatory. Since this feature depends on asynchronous interrupts, "wakeup-source", "keep-power-in-suspend" and "cap-sdio-irq" flags are necessary, and the interrupts list should be extended(the interrupt named with sdio_wakeup): &mmcX { ... interrupt-names = "msdc", "sdio_wakeup"; interrupts-extended = <...>, <&pio xxx IRQ_TYPE_LEVEL_LOW>; ... pinctrl-names = "default", "state_uhs", "state_eint"; ... pinctrl-2 = <&mmc2_pins_eint>; ... cap-sdio-irq; keep-power-in-suspend; wakeup-source; ... }; Co-developed-by: Yong Mao <yong.mao@mediatek.com> Signed-off-by: Yong Mao <yong.mao@mediatek.com> Reviewed-by: Chaotian Jing <chaotian.jing@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Axe Yang <axe.yang@mediatek.com> Link: https://lore.kernel.org/r/20220726062842.18846-4-axe.yang@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-21mmc: renesas_sdhi: newer SoCs don't need manual tap correctionTakeshi Saito
The newest Gen3 SoCs and Gen4 SoCs do not need manual tap correction with HS400 anymore. So, instead of checking the SDHI version, add a quirk flag and set manual tap correction only for affected SoCs. Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com> [wsa: rebased, renamed the quirk variable, removed stale comment] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20220720072901.1266-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-21mmc: cavium-thunderx: Add of_node_put() when breaking out of loopLiang He
In thunder_mmc_probe(), we should call of_node_put() when breaking out of for_each_child_of_node() which has increased and decreased the refcount during each iteration. Fixes: 166bac38c3c5 ("mmc: cavium: Add MMC PCI driver for ThunderX SOCs") Signed-off-by: Liang He <windhl@126.com> Acked-by: Robert Richter <rric@kernel.org> Link: https://lore.kernel.org/r/20220719095216.1241601-2-windhl@126.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-21mmc: cavium-octeon: Add of_node_put() when breaking out of loopLiang He
In octeon_mmc_probe(), we should call of_node_put() when breaking out of for_each_child_of_node() which has increased and decreased the refcount during each iteration. Fixes: 01d95843335c ("mmc: cavium: Add MMC support for Octeon SOCs.") Signed-off-by: Liang He <windhl@126.com> Acked-by: Robert Richter <rric@kernel.org> Link: https://lore.kernel.org/r/20220719095216.1241601-1-windhl@126.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-18mmc: sdhci-brcmstb: use clk_get_rate(base_clk) in PM resumeKamal Dasu
Use clk_get_rate for base_clk on resume before setting new rate. This change ensures that the clock api returns current rate and sets the clock to the desired rate and honors CLK_GET_NO_CACHE attribute used by clock api. Fixes: 97904a59855c (mmc: sdhci-brcmstb: Add ability to increase max clock rate for 72116b0) Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220714174132.18541-1-kdasu.kdev@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-18mmc: sdhci-msm: drop redundant of_device_id entriesKrzysztof Kozlowski
This reverts three commits: 1. Revert "mmc: sdhci-msm: Add compatible string check for sdx65" This reverts commit 953706844f0f2fd4dc6984cc010fe6cf51c041f2. 2. Revert "mmc: sdhci-msm: Add compatible string check for sm8150" This reverts commit 5acd6adb65802cc6f9986be3750179a820580d37. 3. Revert "mmc: sdhci-msm: Add SoC specific compatibles" This reverts commit 466614a9765c6fb67e1464d0a3f1261db903834b. The oldest commit 466614a9765c ("mmc: sdhci-msm: Add SoC specific compatibles") did not specify what benefits such multiple compatibles bring, therefore assume there is none. On the other hand such approach brings a lot of churn to driver maintenance by expecting commit for every new compatible, even though it is already covered by the fallback. There is really no sense in duplicating of_device_id for each variant, which is already covered by generic compatible fallback qcom,sdhci-msm-v4 or qcom,sdhci-msm-v5. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20220714091042.22287-4-krzysztof.kozlowski@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-13mmc: Merge branch fixes into nextUlf Hansson
Merge the mmc fixes for v5.19rc[n] into the next branch, to allow them to get tested together with the new mmc changes that are targeted for v5.20. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-13mmc: mxcmmc: Use mmc_card_sdio macroSeunghui Lee
Use mmc_card_sdio macro to simplify code. Signed-off-by: Seunghui Lee <sh043.lee@samsung.com> Link: https://lore.kernel.org/r/20220713033635.28432-3-sh043.lee@samsung.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-13mmc: sdhci-omap: Fix a lockdep warning for PM runtime initTony Lindgren
We need runtime PM enabled early in probe before sdhci_setup_host() for sdhci_omap_set_capabilities(). But on the first runtime resume we must not call sdhci_runtime_resume_host() as sdhci_setup_host() has not been called yet. Let's check for an initialized controller like we already do for context restore to fix a lockdep warning. Fixes: f433e8aac6b9 ("mmc: sdhci-omap: Implement PM runtime functions") Reported-by: Yegor Yefremov <yegorslists@googlemail.com> Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220622051215.34063-1-tony@atomide.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: sdhci-of-at91: fix set_uhs_signaling rewriting of MC1REugen Hristev
In set_uhs_signaling, the DDR bit is being set by fully writing the MC1R register. This can lead to accidental erase of certain bits in this register. Avoid this by doing a read-modify-write operation. Fixes: d0918764c17b ("mmc: sdhci-of-at91: fix MMC_DDR_52 timing selection") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Tested-by: Karl Olsen <karl@micro-technic.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20220630090926.15061-1-eugen.hristev@microchip.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: tmio: avoid glitches when resettingWolfram Sang
If we reset because of an error, we need to preserve values for the clock frequency. Otherwise, glitches may be seen on the bus. To achieve that, we introduce a 'preserve' parameter to the reset function and the IP core specific reset callbacks to handle everything accordingly. Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20220625131722.1397-1-wsa@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: renesas_sdhi: Fix typo'sLad Prabhakar
Fix typo's, * difference -> different * alignment -> aligned While at it updated the comment to make it clear that Renesas SDHI DMAC needs buffers to be 128-byte aligned. Reported-by: Pavel Machek <pavel@denx.de> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220624181438.4355-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: renesas_sdhi: Get the reset handle early in the probeLad Prabhakar
In case of devm_reset_control_get_optional_exclusive() failure we returned directly instead of jumping to the error path to roll back initialization. This patch moves devm_reset_control_get_optional_exclusive() early in the probe so that we have the reset handle prior to initialization of the hardware. Fixes: b4d86f37eacb7 ("mmc: renesas_sdhi: do hard reset if possible") Reported-by: Pavel Machek <pavel@denx.de> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220624181438.4355-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: sdhci-of-esdhc: Fixup use of of_find_compatible_node()Liang He
Callers of of_find_compatible_node() should drop the reference count accordingly, so let's do that. Signed-off-by: Liang He <windhl@126.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20220621065259.4079817-1-windhl@126.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: sdhci-pci-gli: Fix build error unused-functionRen Zhijie
If CONFIG_PM is not set. make ARCH=x86_64 CROSS_COMPILE=x86_64-linux-gnu-, will be failed, like this: drivers/mmc/host/sdhci-pci-gli.c:834:13: error: ‘gl9763e_set_low_power_negotiation’ defined but not used [-Werror=unused-function] static void gl9763e_set_low_power_negotiation(struct sdhci_pci_slot *slot, bool enable) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors make[3]: *** [drivers/mmc/host/sdhci-pci-gli.o] Error 1 To fix building warning, wrap all related code with CONFIG_PM. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Ren Zhijie <renzhijie2@huawei.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20220619104712.125364-1-renzhijie2@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: host: Improve I/O read/write performance for GL9763EJason Lai
Due to flaws in hardware design, GL9763E takes long time to exit from L1 state. The I/O performance will suffer severe impact if it often enter and exit L1 state during I/O requests. To improve I/O read/write performance and take battery life into account, let's turn on GL9763E L1 negotiation before entering runtime suspend and turn off GL9763E L1 negotiation while executing runtime resume. That is to say, GL9763E will not enter L1 state when executing I/O requests and enter L1 state when PCIe bus idle. Signed-off-by: Renius Chen <reniuschengl@gmail.com> Signed-off-by: Jason Lai <jason.lai@genesyslogic.com.tw> Link: https://lore.kernel.org/r/20220613092907.2502-1-jason.lai@genesyslogic.com.tw [Ulf: Improved the commit message a bit] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: sdhci-st: Obviously always return success in remove callbackUwe Kleine-König
sdhci_pltfm_unregister() returns 0 unconditionally and returning an error in a platform remove callback isn't very sensible. (The only effect of the latter is that the device core emits a generic warning and then removes the device anyhow.) So return 0 unconditionally to make it obvious there is no error forwarded to the upper layers. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20220610211257.102071-5-u.kleine-koenig@pengutronix.de Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: sdhci-of-arasan: Obviously always return success in remove callbackUwe Kleine-König
sdhci_pltfm_unregister() returns 0 unconditionally and returning an error in a platform remove callback isn't very sensible. (The only effect of the latter is that the device core emits a generic warning and then removes the device anyhow.) So return 0 unconditionally to make it obvious there is no error forwarded to the upper layers. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20220610211257.102071-4-u.kleine-koenig@pengutronix.de Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: dw_mmc: rockchip: Obviously always return success in remove callbackUwe Kleine-König
dw_mci_pltfm_remove() returns 0 unconditionally and returning an error in a platform remove callback isn't very sensible. (The only effect of the latter is that the device core emits a generic warning and then removes the device anyhow.) So return 0 unconditionally to make it obvious there is no error forwarded to the upper layers. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20220610211257.102071-3-u.kleine-koenig@pengutronix.de Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: dw_mmc: hi3789cv200: Obviously always return success in remove callbackUwe Kleine-König
dw_mci_pltfm_remove() returns 0 unconditionally and returning an error in a platform remove callback isn't very sensible. (The only effect of the latter is that the device core emits a generic warning and then removes the device anyhow.) So return 0 unconditionally to make it obvious there is no error forwarded to the upper layers. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20220610211257.102071-2-u.kleine-koenig@pengutronix.de Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: dw_mmc: exynos: Obviously always return success in remove callbackUwe Kleine-König
dw_mci_pltfm_remove() returns 0 unconditionally and returning an error in a platform remove callback isn't very sensible. (The only effect of the latter is that the device core emits a generic warning and then removes the device anyhow.) So return 0 unconditionally to make it obvious there is no error forwarded to the upper layers. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20220610211257.102071-1-u.kleine-koenig@pengutronix.de Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: sdhci-brcmstb: Initialize base_clk to NULL in sdhci_brcmstb_probe()Nathan Chancellor
Clang warns a few times along the lines of: drivers/mmc/host/sdhci-brcmstb.c:302:6: warning: variable 'base_clk' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] if (res) ^~~ drivers/mmc/host/sdhci-brcmstb.c:376:24: note: uninitialized use occurs here clk_disable_unprepare(base_clk); ^~~~~~~~ base_clk is used in the error path before it is initialized. Initialize it to NULL, as clk_disable_unprepare() calls clk_disable() and clk_unprepare(), which both handle NULL pointers gracefully. Link: https://github.com/ClangBuiltLinux/linux/issues/1650 Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20220608152757.82529-1-nathan@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: mmci: Fix typo in commentXiang wangx
Delete the redundant word 'is'. Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com> Link: https://lore.kernel.org/r/20220608130847.46359-1-wangxiang@cdjrlc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: renesas_sdhi: add R-Car Gen4 fallback compatibility stringWolfram Sang
For now, Gen4 is treated the same as Gen3. But we still want a seperate fallback just in case. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220603233300.21789-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: cqhci: Capture eMMC and SD card errorsShaik Sajida Bhanu
Add changes to capture eMMC and SD card errors. This is useful for debug and testing. Signed-off-by: Liangliang Lu <quic_luliang@quicinc.com> Signed-off-by: Sayali Lokhande <quic_sayalil@quicinc.com> Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com> Signed-off-by: Ram Prakash Gupta <quic_rampraka@quicinc.com> Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@quicinc.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1653674036-21829-6-git-send-email-quic_c_sbhanu@quicinc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: sdhci: Capture eMMC and SD card errorsShaik Sajida Bhanu
Add changes to capture eMMC and SD card errors. This is useful for debug and testing. Signed-off-by: Liangliang Lu <quic_luliang@quicinc.com> Signed-off-by: Sayali Lokhande <quic_sayalil@quicinc.com> Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com> Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@quicinc.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1653674036-21829-3-git-send-email-quic_c_sbhanu@quicinc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: mtk-sd: fix typoFabien Parent
Fix a typo: Fianl -> Final. Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Miles Chen <miles.chen@mediatek.com> Link: https://lore.kernel.org/r/20220530123857.692076-1-fparent@baylibre.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: mxcmmc: Silence a clang warningFabio Estevam
Change the of_device_get_match_data() cast to (uintptr_t) to silence the following clang warning: drivers/mmc/host/mxcmmc.c:1028:18: warning: cast to smaller integer type 'enum mxcmci_type' from 'const void *' [-Wvoid-pointer-to-enum-cast] Reported-by: kernel test robot <lkp@intel.com> Fixes: 8223e885e74b ("mmc: mxc: Convert the driver to DT-only") Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20220526010022.1163483-1-festevam@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: sdhci-of-esdhc: Fix refcount leak in esdhc_signal_voltage_switchMiaoqian Lin
of_find_matching_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. of_node_put() checks null pointer. Fixes: ea35645a3c66 ("mmc: sdhci-of-esdhc: add support for signal voltage switch") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220523144255.10310-1-linmq006@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: sdhci-brcmstb: Add ability to increase max clock rate for 72116b0Kamal Dasu
The 72116B0 has improved SDIO controllers that allow the max clock rate to be increased from a max of 100MHz to a max of 150MHz. The driver will need to get the clock and increase it's default rate and override the caps register, that still indicates a max of 100MHz. The new clock will be named "sdio_freq" in the DT node's "clock-names" list. The driver will use a DT property, "clock-frequency", to enable this functionality and will get the actual rate in MHz from the property to allow various speeds to be requested. Signed-off-by: Al Cooper <alcooperx@gmail.com> Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220520183108.47358-3-kdasu.kdev@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: sdhci-of-dwcmshc: add support for rk3588Yifeng Zhao
Add support for RK3588's DWCMSHC controller, which is used for providing the rootfs on the RK3588 evaluation board. Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com> [port from vendor BSP] Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20220504213251.264819-12-sebastian.reichel@collabora.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: sdhci-of-dwcmshc: rename rk3568 to rk35xxSebastian Reichel
Prepare driver for rk3588 support by renaming the internal data structures. Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20220504213251.264819-11-sebastian.reichel@collabora.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: sdhci-of-dwcmshc: add reset call back for rockchip SocsYifeng Zhao
The reset function build in the SDHCI will not reset the logic circuit related to the tuning function, which may cause data reading errors. Resetting the complete SDHCI controller through the reset controller fixes the issue. Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com> [rebase, use optional variant of reset getter] Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20220504213251.264819-10-sebastian.reichel@collabora.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-11mmc: sdhci-of-aspeed: test: Use kunit_test_suite() macroDavid Gow
The kunit_test_suite() macro is no-longer incompatible with module_add, so its use can be reinstated. Since this fixes parsing with builtins and kunit_tool, also enable the test by default when KUNIT_ALL_TESTS is enabled. The test can now be run via kunit_tool with: ./tools/testing/kunit/kunit.py run --arch=x86_64 \ --kconfig_add CONFIG_OF=y --kconfig_add CONFIG_OF_ADDRESS=y \ --kconfig_add CONFIG_MMC=y --kconfig_add CONFIG_MMC_SDHCI=y \ --kconfig_add CONFIG_MMC_SDHCI_PLTFM=y \ --kconfig_add CONFIG_MMC_SDHCI_OF_ASPEED=y \ 'sdhci-of-aspeed' (It may be worth adding a .kunitconfig at some point, as there are enough dependencies to make that command scarily long.) Acked-by: Daniel Latypov <dlatypov@google.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-06-23ACPI / MMC: PM: Unify fixing up device powerRafael J. Wysocki
Introduce acpi_device_fix_up_power_extended() for fixing up power of a device having an ACPI companion in a manner that takes the device's children into account and make the MMC code use it in two places instead of walking the list of the device ACPI companion's children directly. This will help to eliminate the children list head from struct acpi_device as it is redundant and it is used in questionable ways in some places (in particular, locking is needed for walking the list pointed to it safely, but it is often missing). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-06-15mmc: mediatek: wait dma stop bit reset to 0Mengqi Zhang
MediaTek IP requires that after dma stop, it need to wait this dma stop bit auto-reset to 0. When bus is in high loading state, it will take a while for the dma stop complete. If there is no waiting operation here, when program runs to clear fifo and reset, bus will hang. In addition, there should be no return in msdc_data_xfer_next() if there is data need be transferred, because no matter what error occurs here, it should continue to excute to the following mmc_request_done. Otherwise the core layer may wait complete forever. Signed-off-by: Mengqi Zhang <mengqi.zhang@mediatek.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220609112239.18911-1-mengqi.zhang@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-29 03:43:48 +0000