summaryrefslogtreecommitdiff
path: root/drivers/net/dsa
AgeCommit message (Collapse)Author
2023-07-14net: dsa: mv88e6xxx: convert 88e6185 to phylink_pcsRussell King (Oracle)
Convert the 88E6185 SERDES code to use the phylink_pcs infrastructure. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-14net: dsa: mv88e6xxx: export mv88e6xxx_pcs_decode_state()Russell King (Oracle)
Rename and export the PCS state decoding function so our PCS can make use of the functionality provided by this. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-14net: dsa: mv88e6xxx: add infrastructure for phylink_pcsRussell King (Oracle)
Add infrastructure for phylink_pcs to the mv88e6xxx driver. This involves adding a mac_select_pcs() hook so we can pass the PCS to phylink at the appropriate time, and a PCS initialisation function. As the various chip implementations are converted to use phylink_pcs, they are no longer reliant on the legacy phylink behaviour. We detect this by the use of this infrastructure, or the lack of any serdes. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-14net: dsa: mv88e6xxx: remove handling for DSA and CPU portsRussell King (Oracle)
As we now always use a fixed-link for DSA and CPU ports, we no longer need the hack in the Marvell code to make this work. Remove it. This is especially important with the conversion of DSA drivers to phylink_pcs, as the PCS code only gets called if we are using phylink for the port. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-14net: dsa: ar9331: Use maple tree register cacheMark Brown
We now have a regmap cache which uses a maple tree to store the register state, this is a more modern data structure and the regmap level code using it makes a number of assumptions better tuned for modern hardware than those made by the rbtree cache type that the at9331 driver uses. Switch the ar9331 driver to use the more modern data structure. This should have minimal practical impact, it's mainly code modernisation. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-14net: dsa: ar9331: Use explict flags for regmap single read/writeMark Brown
The at9331 is only able to read or write a single register at once. The driver has a custom regmap bus and chooses to tell the regmap core about this by reporting the maximum transfer sizes rather than the explicit flags that exist at the regmap level. Since there are a number of problems with the raw transfer limits and the regmap level flags are better integrated anyway convert the driver to use the flags. No functional change. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-13dsa: mv88e6xxx: Do a final check before timing outLinus Walleij
I get sporadic timeouts from the driver when using the MV88E6352. Reading the status again after the loop fixes the problem: the operation is successful but goes undetected. Some added prints show things like this: [ 58.356209] mv88e6085 mdio_mux-0.1:00: Timeout while waiting for switch, addr 1b reg 0b, mask 8000, val 0000, data c000 [ 58.367487] mv88e6085 mdio_mux-0.1:00: Timeout waiting for ATU op 4000, fid 0001 (...) [ 61.826293] mv88e6085 mdio_mux-0.1:00: Timeout while waiting for switch, addr 1c reg 18, mask 8000, val 0000, data 9860 [ 61.837560] mv88e6085 mdio_mux-0.1:00: Timeout waiting for PHY command 1860 to complete The reason is probably not the commands: I think those are mostly fine with the 50+50ms timeout, but the problem appears when OpenWrt brings up several interfaces in parallel on a system with 7 populated ports: if one of them take more than 50 ms and waits one or more of the others can get stuck on the mutex for the switch and then this can easily multiply. As we sleep and wait, the function loop needs a final check after exiting the loop if we were successful. Suggested-by: Andrew Lunn <andrew@lunn.ch> Cc: Tobias Waldekranz <tobias@waldekranz.com> Fixes: 35da1dfd9484 ("net: dsa: mv88e6xxx: Improve performance of busy bit polling") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230712223405.861899-1-linus.walleij@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-11net: dsa: Removed unneeded of_node_put in felix_parse_ports_nodeLu Hongfei
Remove unnecessary of_node_put from the continue path to prevent child node from being released twice, which could avoid resource leak or other unexpected issues. Signed-off-by: Lu Hongfei <luhongfei@vivo.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Fixes: de879a016a94 ("net: dsa: felix: add functionality when not all ports are supported") Link: https://lore.kernel.org/r/20230710031859.36784-1-luhongfei@vivo.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-10net: dsa: qca8k: Add check for skb_copyJiasheng Jiang
Add check for the return value of skb_copy in order to avoid NULL pointer dereference. Fixes: 2cd548566384 ("net: dsa: qca8k: add support for phy read/write with mgmt Ethernet") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-06net: mscc: ocelot: fix oversize frame dropping for preemptible TCsVladimir Oltean
This switch implements Hold/Release in a strange way, with no control from the user as required by IEEE 802.1Q-2018 through Set-And-Hold-MAC and Set-And-Release-MAC, but rather, it emits HOLD requests implicitly based on the schedule. Namely, when the gate of a preemptible TC is about to close (actually QSYS::PREEMPTION_CFG.HOLD_ADVANCE octet times in advance of this event), the QSYS seems to emit a HOLD request pulse towards the MAC which preempts the currently transmitted packet, and further packets are held back in the queue system. This allows large frames to be squeezed through small time slots, because HOLD requests initiated by the gate events result in the frame being segmented in multiple fragments, the bit time of which is equal to the size of the time slot. It has been reported that the vsc9959_tas_guard_bands_update() logic breaks this, because it doesn't take preemptible TCs into account, and enables oversized frame dropping when the time slot doesn't allow a full MTU to be sent, but it does allow 2*minFragSize to be sent (128B). Packets larger than 128B are dropped instead of being sent in multiple fragments. Confusingly, the manual says: | For guard band, SDU calculation of a traffic class of a port, if | preemption is enabled (through 'QSYS::PREEMPTION_CFG.P_QUEUES') then | QSYS::PREEMPTION_CFG.HOLD_ADVANCE is used, otherwise | QSYS::QMAXSDU_CFG_*.QMAXSDU_* is used. but this only refers to the static guard band durations, and the QMAXSDU_CFG_* registers have dual purpose - the other being oversized frame dropping, which takes place irrespective of whether frames are preemptible or express. So, to fix the problem, we need to call vsc9959_tas_guard_bands_update() from ocelot_port_update_active_preemptible_tcs(), and modify the guard band logic to consider a different (lower) oversize limit for preemptible traffic classes. Fixes: 403ffc2c34de ("net: mscc: ocelot: add support for preemptible traffic classes") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Message-ID: <20230705104422.49025-4-vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-06net: dsa: felix: make vsc9959_tas_guard_bands_update() visible to ocelot->opsVladimir Oltean
In a future change we will need to make ocelot_port_update_active_preemptible_tcs() call vsc9959_tas_guard_bands_update(), but that is currently not possible, since the ocelot switch lib does not have access to functions private to the DSA wrapper. Move the pointer to vsc9959_tas_guard_bands_update() from felix->info (which is private to the DSA driver) to ocelot->ops (which is also visible to the ocelot switch lib). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Message-ID: <20230705104422.49025-3-vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-06net: mscc: ocelot: extend ocelot->fwd_domain_lock to cover ocelot->tas_lockVladimir Oltean
In a future commit we will have to call vsc9959_tas_guard_bands_update() from ocelot_port_update_active_preemptible_tcs(), and that will be impossible due to the AB/BA locking dependencies between ocelot->tas_lock and ocelot->fwd_domain_lock. Just like we did in commit 3ff468ef987e ("net: mscc: ocelot: remove struct ocelot_mm_state :: lock"), the only solution is to expand the scope of ocelot->fwd_domain_lock for it to also serialize changes made to the Time-Aware Shaper, because those will have to result in a recalculation of cut-through TCs, which is something that depends on the forwarding domain. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Message-ID: <20230705104422.49025-2-vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-04net: dsa: sja1105: always enable the send_meta optionsVladimir Oltean
incl_srcpt has the limitation, mentioned in commit b4638af8885a ("net: dsa: sja1105: always enable the INCL_SRCPT option"), that frames with a MAC DA of 01:80:c2:xx:yy:zz will be received as 01:80:c2:00:00:zz unless PTP RX timestamping is enabled. The incl_srcpt option was initially unconditionally enabled, then that changed with commit 42824463d38d ("net: dsa: sja1105: Limit use of incl_srcpt to bridge+vlan mode"), then again with b4638af8885a ("net: dsa: sja1105: always enable the INCL_SRCPT option"). Bottom line is that it now needs to be always enabled, otherwise the driver does not have a reliable source of information regarding source_port and switch_id for link-local traffic (tag_8021q VLANs may be imprecise since now they identify an entire bridging domain when ports are not standalone). If we accept that PTP RX timestamping (and therefore, meta frame generation) is always enabled in hardware, then that limitation could be avoided and packets with any MAC DA can be properly received, because meta frames do contain the original bytes from the MAC DA of their associated link-local packet. This change enables meta frame generation unconditionally, which also has the nice side effects of simplifying the switch control path (a switch reset is no longer required on hwtstamping settings change) and the tagger data path (it no longer needs to be informed whether to expect meta frames or not - it always does). Fixes: 227d07a07ef1 ("net: dsa: sja1105: Add support for traffic through standalone ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-29net: dsa: vsc73xx: fix MTU configurationPawel Dembicki
Switch in MAXLEN register stores the maximum size of a data frame. The MTU size is 18 bytes smaller than the frame size. The current settings are causing problems with packet forwarding. This patch fixes the MTU settings to proper values. Fixes: fb77ffc6ec86 ("net: dsa: vsc73xx: make the MTU configurable") Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20230628194327.1765644-1-paweldembicki@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-29net: dsa: sja1105: always enable the INCL_SRCPT optionVladimir Oltean
Link-local traffic on bridged SJA1105 ports is sometimes tagged by the hardware with source port information (when the port is under a VLAN aware bridge). The tag_8021q source port identification has become more loose ("imprecise") and will report a plausible rather than exact bridge port, when under a bridge (be it VLAN-aware or VLAN-unaware). But link-local traffic always needs to know the precise source port. Modify the driver logic (and therefore: the tagging protocol itself) to always include the source port information with link-local packets, regardless of whether the port is standalone, under a VLAN-aware or VLAN-unaware bridge. This makes it possible for the tagging driver to give priority to that information over the tag_8021q VLAN header. The big drawback with INCL_SRCPT is that it makes it impossible to distinguish between an original MAC DA of 01:80:C2:XX:YY:ZZ and 01:80:C2:AA:BB:ZZ, because the tagger just patches MAC DA bytes 3 and 4 with zeroes. Only if PTP RX timestamping is enabled, the switch will generate a META follow-up frame containing the RX timestamp and the original bytes 3 and 4 of the MAC DA. Those will be used to patch up the original packet. Nonetheless, in the absence of PTP RX timestamping, we have to live with this limitation, since it is more important to have the more precise source port information for link-local traffic. Fixes: d7f9787a763f ("net: dsa: tag_8021q: add support for imprecise RX based on the VBID") Fixes: 91495f21fcec ("net: dsa: tag_8021q: replace the SVL bridging with VLAN-unaware IVL bridging") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-29net: dsa: felix: don't drop PTP frames with tag_8021q when RX timestamping ↵Vladimir Oltean
is disabled The driver implements a workaround for the fact that it doesn't have an IRQ source to tell it whether PTP frames are available through the extraction registers, for those frames to be processed and passed towards the network stack. That workaround is to configure the switch, through felix_hwtstamp_set() -> felix_update_trapping_destinations(), to create two copies of PTP packets: one sent over Ethernet to the DSA master, and one to be consumed through the aforementioned CPU extraction queue registers. The reason why we want PTP packets to be consumed through the CPU extraction registers in the first place is because we want to see their hardware RX timestamp. With tag_8021q, that is only visible that way, and it isn't visible with the copy of the packet that's transmitted over Ethernet. The problem with the workaround implementation is that it drops the packet received over Ethernet, in expectation of its copy being present in the CPU extraction registers. However, if felix_hwtstamp_set() hasn't run (aka PTP RX timestamping is disabled), the driver will drop the original PTP frame and there will be no copy of it in the CPU extraction registers. So, the network stack will simply not see any PTP frame. Look at the port's trapping configuration to see whether the driver has previously enabled the CPU extraction registers. If it hasn't, just don't RX timestamp the frame and let it be passed up the stack by DSA, which is perfectly fine. Fixes: 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-22net: dsa: qca8k: add support for additional modes for netdev triggerChristian Marangi
The QCA8K switch supports additional modes that can be handled in hardware for the LED netdev trigger. Add these additional modes to further support the Switch LEDs and offload more blink modes. Add additional modes: - link_10 - link_100 - link_1000 - half_duplex - full_duplex Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20230621095409.25859-1-ansuelsmth@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-22net: dsa: microchip: fix writes to phy registers >= 0x10Rasmus Villemoes
According to the errata sheets for ksz9477 and ksz9567, writes to the PHY registers 0x10-0x1f (i.e. those located at addresses 0xN120 to 0xN13f) must be done as a 32 bit write to the 4-byte aligned address containing the register, hence requires a RMW in order not to change the adjacent PHY register. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230620113855.733526-4-linux@rasmusvillemoes.dk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-22net: dsa: microchip: add ksz_prmw32() helperRasmus Villemoes
This will be used in a subsequent patch fixing an errata for writes to certain PHY registers. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Link: https://lore.kernel.org/r/20230620113855.733526-3-linux@rasmusvillemoes.dk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-22net: dsa: microchip: simplify ksz_prmw8()Rasmus Villemoes
Implement ksz_prmw8() in terms of ksz_rmw8(), just as all the other ksz_pX are implemented in terms of ksz_X. No functional change. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Link: https://lore.kernel.org/r/20230620113855.733526-2-linux@rasmusvillemoes.dk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-22net: dsa: mt7530: update PCS driver to use neg_modeRussell King (Oracle)
Update mt7530's embedded PCS driver to use neg_mode, even though it makes no use of it or the "mode" argument. This makes the driver consistent with converted drivers. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1qA8Ej-00EaGR-Fk@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-22net: dsa: b53: update PCS driver to use neg_modeRussell King (Oracle)
Update B53's embedded PCS driver to use neg_mode, even though it makes no use of it or the "mode" argument. This makes the driver consistent with converted drivers. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/E1qA8Ee-00EaGL-Az@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-22net: qca8k: update PCS driver to use neg_modeRussell King (Oracle)
Update qca8k's embedded PCS driver to use neg_mode rather than the mode argument. As there is no pcs_link_up() method, this only affects the pcs_config() method. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1qA8EU-00EaG9-1l@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-22net: pcs: xpcs: update PCS driver to use neg_modeRussell King (Oracle)
Update xpcs to use neg_mode to configure whether inband negotiation should be used. We need to update sja1105 as well as that directly calls into the XPCS driver's config function. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1qA8Dt-00EaFS-W9@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: tools/testing/selftests/net/fcnal-test.sh d7a2fc1437f7 ("selftests: net: fcnal-test: check if FIPS mode is enabled") dd017c72dde6 ("selftests: fcnal: Test SO_DONTROUTE on TCP sockets.") https://lore.kernel.org/all/5007b52c-dd16-dbf6-8d64-b9701bfa498b@tessares.net/ https://lore.kernel.org/all/20230619105427.4a0df9b3@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-20net: dsa: introduce preferred_default_local_cpu_port and use on MT7530Vladimir Oltean
Since the introduction of the OF bindings, DSA has always had a policy that in case multiple CPU ports are present in the device tree, the numerically smallest one is always chosen. The MT7530 switch family, except the switch on the MT7988 SoC, has 2 CPU ports, 5 and 6, where port 6 is preferable on the MT7531BE switch because it has higher bandwidth. The MT7530 driver developers had 3 options: - to modify DSA when the MT7531 switch support was introduced, such as to prefer the better port - to declare both CPU ports in device trees as CPU ports, and live with the sub-optimal performance resulting from not preferring the better port - to declare just port 6 in the device tree as a CPU port Of course they chose the path of least resistance (3rd option), kicking the can down the road. The hardware description in the device tree is supposed to be stable - developers are not supposed to adopt the strategy of piecemeal hardware description, where the device tree is updated in lockstep with the features that the kernel currently supports. Now, as a result of the fact that they did that, any attempts to modify the device tree and describe both CPU ports as CPU ports would make DSA change its default selection from port 6 to 5, effectively resulting in a performance degradation visible to users with the MT7531BE switch as can be seen below. Without preferring port 6: [ ID][Role] Interval Transfer Bitrate Retr [ 5][TX-C] 0.00-20.00 sec 374 MBytes 157 Mbits/sec 734 sender [ 5][TX-C] 0.00-20.00 sec 373 MBytes 156 Mbits/sec receiver [ 7][RX-C] 0.00-20.00 sec 1.81 GBytes 778 Mbits/sec 0 sender [ 7][RX-C] 0.00-20.00 sec 1.81 GBytes 777 Mbits/sec receiver With preferring port 6: [ ID][Role] Interval Transfer Bitrate Retr [ 5][TX-C] 0.00-20.00 sec 1.99 GBytes 856 Mbits/sec 273 sender [ 5][TX-C] 0.00-20.00 sec 1.99 GBytes 855 Mbits/sec receiver [ 7][RX-C] 0.00-20.00 sec 1.72 GBytes 737 Mbits/sec 15 sender [ 7][RX-C] 0.00-20.00 sec 1.71 GBytes 736 Mbits/sec receiver Using one port for WAN and the other ports for LAN is a very popular use case which is what this test emulates. As such, this change proposes that we retroactively modify stable kernels (which don't support the modification of the CPU port assignments, so as to let user space fix the problem and restore the throughput) to keep the mt7530 driver preferring port 6 even with device trees where the hardware is more fully described. Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-20net: dsa: mt7530: fix handling of LLDP framesArınç ÜNAL
LLDP frames are link-local frames, therefore they must be trapped to the CPU port. Currently, the MT753X switches treat LLDP frames as regular multicast frames, therefore flooding them to user ports. To fix this, set LLDP frames to be trapped to the CPU port(s). Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-20net: dsa: mt7530: fix handling of BPDUs on MT7530 switchArınç ÜNAL
BPDUs are link-local frames, therefore they must be trapped to the CPU port. Currently, the MT7530 switch treats BPDUs as regular multicast frames, therefore flooding them to user ports. To fix this, set BPDUs to be trapped to the CPU port. Group this on mt7530_setup() and mt7531_setup_common() into mt753x_trap_frames() and call that. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-20net: dsa: mt7530: fix trapping frames on non-MT7621 SoC MT7530 switchArınç ÜNAL
All MT7530 switch IP variants share the MT7530_MFC register, but the current driver only writes it for the switch variant that is integrated in the MT7621 SoC. Modify the code to include all MT7530 derivatives. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-20net: dsa: mt7530: set all CPU ports in MT7531_CPU_PMAPArınç ÜNAL
MT7531_CPU_PMAP represents the destination port mask for trapped-to-CPU frames (further restricted by PCR_MATRIX). Currently the driver sets the first CPU port as the single port in this bit mask, which works fine regardless of whether the device tree defines port 5, 6 or 5+6 as CPU ports. This is because the logic coincides with DSA's logic of picking the first CPU port as the CPU port that all user ports are affine to, by default. An upcoming change would like to influence DSA's selection of the default CPU port to no longer be the first one, and in that case, this logic needs adaptation. Since there is no observed leakage or duplication of frames if all CPU ports are defined in this bit mask, simply include them all. Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk> Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: include/linux/mlx5/driver.h 617f5db1a626 ("RDMA/mlx5: Fix affinity assignment") dc13180824b7 ("net/mlx5: Enable devlink port for embedded cpu VF vports") https://lore.kernel.org/all/20230613125939.595e50b8@canb.auug.org.au/ tools/testing/selftests/net/mptcp/mptcp_join.sh 47867f0a7e83 ("selftests: mptcp: join: skip check if MIB counter not supported") 425ba803124b ("selftests: mptcp: join: support RM_ADDR for used endpoints or not") 45b1a1227a7a ("mptcp: introduces more address related mibs") 0639fa230a21 ("selftests: mptcp: add explicit check for new mibs") https://lore.kernel.org/netdev/20230609-upstream-net-20230610-mptcp-selftests-support-old-kernels-part-3-v1-0-2896fe2ee8a3@tessares.net/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-14net: dsa: felix: fix taprio guard band overflow at 10Mbps with jumbo framesVladimir Oltean
The DEV_MAC_MAXLEN_CFG register contains a 16-bit value - up to 65535. Plus 2 * VLAN_HLEN (4), that is up to 65543. The picos_per_byte variable is the largest when "speed" is lowest - SPEED_10 = 10. In that case it is (1000000L * 8) / 10 = 800000. Their product - 52434400000 - exceeds 32 bits, which is a problem, because apparently, a multiplication between two 32-bit factors is evaluated as 32-bit before being assigned to a 64-bit variable. In fact it's a problem for any MTU value larger than 5368. Cast one of the factors of the multiplication to u64 to force the multiplication to take place on 64 bits. Issue found by Coverity. Fixes: 55a515b1f5a9 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230613170907.2413559-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: net/sched/sch_taprio.c d636fc5dd692 ("net: sched: add rcu annotations around qdisc->qdisc_sleeping") dced11ef84fb ("net/sched: taprio: don't overwrite "sch" variable in taprio_dump_class_stats()") net/ipv4/sysctl_net_ipv4.c e209fee4118f ("net/ipv4: ping_group_range: allow GID from 2147483648 to 4294967294") ccce324dabfe ("tcp: make the first N SYN RTO backoffs linear") https://lore.kernel.org/all/20230605100816.08d41a7b@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-07net: dsa: mv88e6xxx: implement USXGMII mode for mv88e6393xMichal Smulski
Enable USXGMII mode for mv88e6393x chips. Tested on Marvell 88E6191X. Signed-off-by: Michal Smulski <michal.smulski@ooma.com> Link: https://lore.kernel.org/r/20230605174442.12493-1-msmulski2@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-07net: dsa: qca8k: remove unnecessary (void*) conversionsAtin Bainada
Pointer variables of (void*) type do not require type cast. Signed-off-by: Atin Bainada <hi@atinb.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-07net: dsa: ocelot: unlock on error in vsc9959_qos_port_tas_set()Dan Carpenter
This error path needs call mutex_unlock(&ocelot->tas_lock) before returning. Fixes: 2d800bc500fb ("net/sched: taprio: replace tc_taprio_qopt_offload :: enable with a "cmd" enum") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-06net: dsa: microchip: remove KSZ9477 PHY errata handlingRobert Hancock
The KSZ9477 PHY errata handling code has now been moved into the Micrel PHY driver, so it is no longer needed inside the DSA switch driver. Remove it. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-05net: dsa: sja1105: use xpcs_create_mdiodev()Russell King (Oracle)
Use the new xpcs_create_mdiodev() creator, which simplifies the creation and destruction of the mdio device associated with xpcs. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-05net: dsa: sja1105: allow XPCS to handle mdiodev lifetimeRussell King (Oracle)
Put the mdiodev after xpcs_create() so that the XPCS driver can manage the lifetime of the mdiodev its using. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-02net: dsa: qca8k: add CONFIG_LEDS_TRIGGERS dependencyArnd Bergmann
Without LED triggers, the driver now fails to build: drivers/net/dsa/qca/qca8k-leds.c: In function 'qca8k_parse_port_leds': drivers/net/dsa/qca/qca8k-leds.c:403:31: error: 'struct led_classdev' has no member named 'hw_control_is_supported' 403 | port_led->cdev.hw_control_is_supported = qca8k_cled_hw_control_is_supported; | ^ There is a mix of 'depends on' and 'select' for LEDS_TRIGGERS, so it's not clear what we should use here, but in general using 'depends on' causes fewer problems, so use that. Fixes: e0256648c831a ("net: dsa: qca8k: implement hw_control ops") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-01net: dsa: lan9303: allow vid != 0 in port_fdb_{add|del} methodsAlexander Sverdlin
LAN9303 doesn't associate FDB (ALR) entries with VLANs, it has just one global Address Logic Resolution table [1]. Ignore VID in port_fdb_{add|del} methods, go on with the global table. This is the same semantics as hellcreek or RZ/N1 implement. Visible symptoms: LAN9303_MDIO 5b050000.ethernet-1:00: port 2 failed to delete 00:xx:xx:xx:xx:cf vid 1 from fdb: -2 LAN9303_MDIO 5b050000.ethernet-1:00: port 2 failed to add 00:xx:xx:xx:xx:cf vid 1 to fdb: -95 [1] https://ww1.microchip.com/downloads/en/DeviceDoc/00002308A.pdf Fixes: 0620427ea0d6 ("net: dsa: lan9303: Add fdb/mdb manipulation") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20230531143826.477267-1-alexander.sverdlin@siemens.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: drivers/net/ethernet/sfc/tc.c 622ab656344a ("sfc: fix error unwinds in TC offload") b6583d5e9e94 ("sfc: support TC decap rules matching on enc_src_port") net/mptcp/protocol.c 5b825727d087 ("mptcp: add annotations around msk->subflow accesses") e76c8ef5cc5b ("mptcp: refactor mptcp_stream_accept()") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-01net: dsa: mv88e6xxx: Increase wait after reset deactivationAndreas Svensson
A switch held in reset by default needs to wait longer until we can reliably detect it. An issue was observed when testing on the Marvell 88E6393X (Link Street). The driver failed to detect the switch on some upstarts. Increasing the wait time after reset deactivation solves this issue. The updated wait time is now also the same as the wait time in the mv88e6xxx_hardware_reset function. Fixes: 7b75e49de424 ("net: dsa: mv88e6xxx: wait after reset deactivation") Signed-off-by: Andreas Svensson <andreas.svensson@axis.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230530145223.1223993-1-andreas.svensson@axis.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-05-31net/sched: taprio: replace tc_taprio_qopt_offload :: enable with a "cmd" enumVladimir Oltean
Inspired from struct flow_cls_offload :: cmd, in order for taprio to be able to report statistics (which is future work), it seems that we need to drill one step further with the ndo_setup_tc(TC_SETUP_QDISC_TAPRIO) multiplexing, and pass the command as part of the common portion of the muxed structure. Since we already have an "enable" variable in tc_taprio_qopt_offload, refactor all drivers to check for "cmd" instead of "enable", and reject every other command except "replace" and "destroy" - to be future proof. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> # for lan966x Acked-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-31net: dsa: mv88e6xxx: add support for MV88E6071 switchLukasz Majewski
A mv88e6250 family switch with 5 internal PHYs, 2 RMIIs and no PTP support. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-31net: dsa: mv88e6xxx: add support for MV88E6020 switchMatthias Schiffer
A mv88e6250 family switch with 2 PHY and RMII ports and no PTP support. Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-31net: dsa: Define .set_max_frame_size() callback for mv88e6250 SoC familyLukasz Majewski
Switches from mv88e6250 family (including mv88e6020 and mv88e6071) need the possibility to setup the maximal frame size, as they support frames up to 2048 bytes. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-31net: dsa: Switch i2c drivers back to use .probe()Uwe Kleine-König
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-31net: dsa: qca8k: add op to get ports netdevAndrew Lunn
In order that the LED trigger can blink the switch MAC ports LED, it needs to know the netdev associated to the port. Add the callback to return the struct device of the netdev. Add an helper function qca8k_phy_to_port() to convert the phy back to dsa_port index, as we reference LED port based on the internal PHY index and needs to be converted back. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-31net: dsa: qca8k: implement hw_control opsChristian Marangi
Implement hw_control ops to drive Switch LEDs based on hardware events. Netdev trigger is the declared supported trigger for hw control operation and supports the following mode: - tx - rx When hw_control_set is called, LEDs are set to follow the requested mode. Each LEDs will blink at 4Hz by default. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-23 00:54:09 +0000