summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom
AgeCommit message (Collapse)Author
2022-02-20bnxt_en: Fix devlink fw_activateKalesh AP
To install a livepatch, first flash the package to NVM, and then activate the patch through the "HWRM_FW_LIVEPATCH" fw command. To uninstall a patch from NVM, flash the removal package and then activate it through the "HWRM_FW_LIVEPATCH" fw command. The "HWRM_FW_LIVEPATCH" fw command has to consider following scenarios: 1. no patch in NVM and no patch active. Do nothing. 2. patch in NVM, but not active. Activate the patch currently in NVM. 3. patch is not in NVM, but active. Deactivate the patch. 4. patch in NVM and the patch active. Do nothing. Fix the code to handle these scenarios during devlink "fw_activate". To install and activate a live patch: devlink dev flash pci/0000:c1:00.0 file thor_patch.pkg devlink -f dev reload pci/0000:c1:00.0 action fw_activate limit no_reset To remove and deactivate a live patch: devlink dev flash pci/0000:c1:00.0 file thor_patch_rem.pkg devlink -f dev reload pci/0000:c1:00.0 action fw_activate limit no_reset Fixes: 3c4153394e2c ("bnxt_en: implement firmware live patching") Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-20bnxt_en: Increase firmware message response DMA wait timeMichael Chan
When polling for the firmware message response, we first poll for the response message header. Once the valid length is detected in the header, we poll for the valid bit at the end of the message which signals DMA completion. Normally, this poll time for DMA completion is extremely short (0 to a few usec). But on some devices under some rare conditions, it can be up to about 20 msec. Increase this delay to 50 msec and use udelay() for the first 10 usec for the common case, and usleep_range() beyond that. Also, change the error message to include the above delay time when printing the timeout value. Fixes: 3c8c20db769c ("bnxt_en: move HWRM API implementation into separate file") Reviewed-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-20bnxt_en: Restore the resets_reliable flag in bnxt_open()Kalesh AP
During ifdown, we call bnxt_inv_fw_health_reg() which will clear both the status_reliable and resets_reliable flags if these registers are mapped. This is correct because a FW reset during ifdown will clear these register mappings. If we detect that FW has gone through reset during the next ifup, we will remap these registers. But during normal ifup with no FW reset, we need to restore the resets_reliable flag otherwise we will not show the reset counter during devlink diagnose. Fixes: 8cc95ceb7087 ("bnxt_en: improve fw diagnose devlink health messages") Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-20bnxt_en: Fix incorrect multicast rx mask setting when not requestedPavan Chebbi
We should setup multicast only when net_device flags explicitly has IFF_MULTICAST set. Otherwise we will incorrectly turn it on even when not asked. Fix it by only passing the multicast table to the firmware if IFF_MULTICAST is set. Fixes: 7d2837dd7a32 ("bnxt_en: Setup multicast properly after resetting device.") Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-20bnxt_en: Fix occasional ethtool -t loopback test failuresMichael Chan
In the current code, we setup the port to PHY or MAC loopback mode and then transmit a test broadcast packet for the loopback test. This scheme fails sometime if the port is shared with management firmware that can also send packets. The driver may receive the management firmware's packet and the test will fail when the contents don't match the test packet. Change the test packet to use it's own MAC address as the destination and setup the port to only receive it's own MAC address. This should filter out other packets sent by management firmware. Fixes: 91725d89b97a ("bnxt_en: Add PHY loopback to ethtool self-test.") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-20bnxt_en: Fix offline ethtool selftest with RDMA enabledMichael Chan
For offline (destructive) self tests, we need to stop the RDMA driver first. Otherwise, the RDMA driver will run into unrecoverable errors when destructive firmware tests are being performed. The irq_re_init parameter used in the half close and half open sequence when preparing the NIC for offline tests should be set to true because the RDMA driver will free all IRQs before the offline tests begin. Fixes: 55fd0cf320c3 ("bnxt_en: Add external loopback test to ethtool selftest.") Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Ben Li <ben.li@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-20bnxt_en: Fix active FEC reporting to ethtoolSomnath Kotur
ethtool --show-fec <interface> does not show anything when the Active FEC setting in the chip is set to None. Fix it to properly return ETHTOOL_FEC_OFF in that case. Fixes: 8b2775890ad8 ("bnxt_en: Report FEC settings to ethtool.") Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-17Revert "net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname"Jonas Gorski
This reverts commit 3710e80952cf2dc48257ac9f145b117b5f74e0a5. Since idm_base and nicpm_base are still optional resources not present on all platforms, this breaks the driver for everything except Northstar 2 (which has both). The same change was already reverted once with 755f5738ff98 ("net: broadcom: fix a mistake about ioremap resource"). So let's do it again. Fixes: 3710e80952cf ("net: ethernet: bgmac: Use devm_platform_ioremap_resource_byname") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> [florian: Added comments to explain the resources are optional] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220216184634.2032460-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-05bnx2x: Replace one-element array with flexible-array memberGustavo A. R. Silva
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. This helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). This issue was found with the help of Coccinelle and audited and fixed, manually. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/79 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-28bnxt: report header-data split stateJakub Kicinski
Aggregation rings imply header-data split. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-26ethernet: broadcom/sb1250-mac: don't write directly to netdev->dev_addrJakub Kicinski
netdev->dev_addr is const now. Compile tested bigsur_defconfig and sb1250_swarm_defconfig. Fixes: adeef3e32146 ("net: constify netdev->dev_addr") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26bnxt_en: Handle async event when the PHC is updated in RTC modePavan Chebbi
In Multi-host environment, when the PHC is updated by one host, an async message from firmware will be sent to other hosts. Re-initialize the timecounter when the driver receives this async message. Cc: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26bnxt_en: Implement .adjtime() for PTP RTC modePavan Chebbi
The adjusted time is set in the PHC in RTC mode. We also need to update the snapshots ptp->current_time and ptp->old_time when the time is adjusted. Cc: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26bnxt_en: Add driver support to use Real Time Counter for PTPPavan Chebbi
Add support for RTC mode if it is supported by firmware. In RTC mode, the PHC is set to the 64-bit clock. Because the legacy interface is 48-bit, the driver still has to keep track of the upper 16 bits and handle the rollover. Cc: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26bnxt_en: PTP: Refactor PTP initialization functionsPavan Chebbi
Making the ptp free and timecounter initialization code into separate functions so that later patches can use them. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26bnxt_en: Update firmware interface to 1.10.2.73Michael Chan
The main changes are PTP support for RTC, additional NVM error codes, backing store v2 firmware APIs. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-24net: use bool values to pass bool param of phy_init_eee()Jisheng Zhang
The 2nd param of phy_init_eee(): clk_stop_enable is a bool param, use true or false instead of 1/0. Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220123152241.1480-1-jszhang@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-14bcmgenet: add WOL IRQ checkSergey Shtylyov
The driver neglects to check the result of platform_get_irq_optional()'s call and blithely passes the negative error codes to devm_request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL. Stop calling devm_request_irq() with the invalid IRQ #s. Fixes: 8562056f267d ("net: bcmgenet: request Wake-on-LAN interrupt") Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-09bnx2x: Remove useless DMA-32 fallback configurationChristophe JAILLET
As stated in [1], dma_set_mask() with a 64-bit mask never fails if dev->dma_mask is non-NULL. So, if it fails, the 32 bits case will also fail for the same reason. Moreover, dma_set_mask_and_coherent() returns 0 or -EIO, so the return code of the function can be used directly. Finally, inline bnx2x_set_coherency_mask() because it is now only a wrapper for a single dma_set_mask_and_coherent() call. Simplify code and remove some dead code accordingly. [1]: https://lkml.org/lkml/2021/6/7/398 Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/29608a525876afddceabf8f11b2ba606da8748fc.1641730747.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-09bnxt_en: improve firmware timeout messagingEdwin Peer
While it has always been possible to infer that an HWRM command was abandoned due to an unhealthy firmware status by the shortened timeout reported, this change improves the log messaging to account for this case explicitly. In the interests of further clarity, the firmware status is now also reported in these new messages. v2: Remove inline keyword for hwrm_wait_must_abort() in .c file. Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-09bnxt_en: use firmware provided max timeout for messagesEdwin Peer
Some older devices cannot accommodate the 40 seconds timeout cap for long running commands (such as NVRAM commands) due to hardware limitations. Allow these devices to request more time for these long running commands, but print a warning, since the longer timeout may cause the hung task watchdog to trigger. In the case of a firmware update operation, this is preferable to failing outright. v2: Use bp->hwrm_cmd_max_timeout directly without the constants. Fixes: 881d8353b05e ("bnxt_en: Add an upper bound for all firmware command timeouts.") Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-09bnxt_en: improve VF error messages when PF is unavailableEdwin Peer
The current driver design relies on the PF netdev being open in order to intercept the following HWRM commands from a VF: - HWRM_FUNC_VF_CFG - HWRM_CFA_L2_FILTER_ALLOC - HWRM_PORT_PHY_QCFG (only if FW_CAP_LINK_ADMIN is not supported) If the PF is closed, then VFs are subjected to rather inscrutable error messages in response to any configuration requests involving the above command types. Recent firmware distinguishes this problem case from other errors by returning HWRM_ERR_CODE_PF_UNAVAILABLE. In most cases, the appropriate course of action is still to fail, but this can now be accomplished with the aid of more user informative log messages. For L2 filter allocations that are already asynchronous, an automatic retry seems more appropriate. v2: Delete extra newline. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-09bnxt_en: add dynamic debug support for HWRM messagesEdwin Peer
Add logging of firmware messages. These can be useful for diagnosing issues in the field, but due to their verbosity are only appropriate at a debug message level. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-12-30 The following pull-request contains BPF updates for your *net-next* tree. We've added 72 non-merge commits during the last 20 day(s) which contain a total of 223 files changed, 3510 insertions(+), 1591 deletions(-). The main changes are: 1) Automatic setrlimit in libbpf when bpf is memcg's in the kernel, from Andrii. 2) Beautify and de-verbose verifier logs, from Christy. 3) Composable verifier types, from Hao. 4) bpf_strncmp helper, from Hou. 5) bpf.h header dependency cleanup, from Jakub. 6) get_func_[arg|ret|arg_cnt] helpers, from Jiri. 7) Sleepable local storage, from KP. 8) Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support, from Kumar. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-29net: Don't include filter.h from net/sock.hJakub Kicinski
sock.h is pretty heavily used (5k objects rebuilt on x86 after it's touched). We can drop the include of filter.h from it and add a forward declaration of struct sk_filter instead. This decreases the number of rebuilt objects when bpf.h is touched from ~5k to ~1k. There's a lot of missing includes this was masking. Primarily in networking tho, this time. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Acked-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/bpf/20211229004913.513372-1-kuba@kernel.org
2021-12-27bnxt_en: Use page frag RX buffers for better software GRO performanceJakub Kicinski
If NETIF_F_GRO_HW is disabled, the existing driver code uses kmalloc'ed data for RX buffers. This causes inefficient SW GRO performance because the GRO data is merged using the less efficient frag_list. Use netdev_alloc_frag() and friends instead so that GRO data can be merged into skb_shinfo(skb)->frags for better performance. [Use skb_free_frag() - Vikas Gupta] Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27bnxt_en: convert to xdp_do_flushEdwin Peer
The xdp_do_flush_map function has been replaced with the more general xdp_do_flush(). Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27bnxt_en: Support CQE coalescing mode in ethtoolMichael Chan
Support showing and setting the CQE mode in ethtool. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27bnxt_en: Support configurable CQE coalescing modeMichael Chan
CQE coalescing mode is the same as the timer reset coalescing mode on Broadcom devices. Currently this mode is always enabled if it is supported by the device. Restructure the code slightly to support dynamically changing this mode. Add a flags field to struct bnxt_coal. Initially, the CQE flag will be set for the RX and TX side if the device supports it. We need to move bnxt_init_dflt_coal() to set up default coalescing until the capability is determined. Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27bnxt_en: enable interrupt sampling on 5750X for DIMAndy Gospodarek
5750X (P5) chips handle receiving packets on the NQ rather than the main completion queue so we need to get and set stats from the correct spots for dynamic interrupt moderation. Signed-off-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27bnxt_en: Log error report for dropped doorbellMichael Chan
Log the unrecognized error report type value as well. Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27bnxt_en: Add event handler for PAUSE Storm eventSomnath Kotur
FW has been modified to send a new async event when it detects a pause storm. Register for this new event and log it upon receipt. Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-22net: broadcom: bcm4908enet: remove redundant variable bytesColin Ian King
The variable bytes is being used to summate slot lengths, however the value is never used afterwards. The summation is redundant so remove variable bytes. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20211222003937.727325-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-20bnx2x: Invalidate fastpath HSI version for VFsManish Chopra
Commit 0a6890b9b4df ("bnx2x: Utilize FW 7.13.15.0.") added validation for fastpath HSI versions for different client init which was not meant for SR-IOV VF clients, which resulted in firmware asserts when running VF clients with different fastpath HSI version. This patch along with the new firmware support in patch #1 fixes this behavior in order to not validate fastpath HSI version for the VFs. Fixes: 0a6890b9b4df ("bnx2x: Utilize FW 7.13.15.0.") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-20bnx2x: Utilize firmware 7.13.21.0Manish Chopra
This new firmware addresses few important issues and enhancements as mentioned below - - Support direct invalidation of FP HSI Ver per function ID, required for invalidating FP HSI Ver prior to each VF start, as there is no VF start - BRB hardware block parity error detection support for the driver - Fix the FCOE underrun flow - Fix PSOD during FCoE BFS over the NIC ports after preboot driver - Maintains backward compatibility This patch incorporates this new firmware 7.13.21.0 in bnx2x driver. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-19flow_offload: reject to offload tc actions in offload driversBaowen Zheng
A follow-up patch will allow users to offload tc actions independent of classifier in the software datapath. In preparation for this, teach all drivers that support offload of the flow tables to reject such configuration as currently none of them support it. Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-16net: systemport: Add global locking for descriptor lifecycleFlorian Fainelli
The descriptor list is a shared resource across all of the transmit queues, and the locking mechanism used today only protects concurrency across a given transmit queue between the transmit and reclaiming. This creates an opportunity for the SYSTEMPORT hardware to work on corrupted descriptors if we have multiple producers at once which is the case when using multiple transmit queues. This was particularly noticeable when using multiple flows/transmit queues and it showed up in interesting ways in that UDP packets would get a correct UDP header checksum being calculated over an incorrect packet length. Similarly TCP packets would get an equally correct checksum computed by the hardware over an incorrect packet length. The SYSTEMPORT hardware maintains an internal descriptor list that it re-arranges when the driver produces a new descriptor anytime it writes to the WRITE_PORT_{HI,LO} registers, there is however some delay in the hardware to re-organize its descriptors and it is possible that concurrent TX queues eventually break this internal allocation scheme to the point where the length/status part of the descriptor gets used for an incorrect data buffer. The fix is to impose a global serialization for all TX queues in the short section where we are writing to the WRITE_PORT_{HI,LO} registers which solves the corruption even with multiple concurrent TX queues being used. Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211215202450.4086240-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-14net_tstamp: add new flag HWTSTAMP_FLAG_BONDED_PHC_INDEXHangbin Liu
Since commit 94dd016ae538 ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to active device") the user could get bond active interface's PHC index directly. But when there is a failover, the bond active interface will change, thus the PHC index is also changed. This may break the user's program if they did not update the PHC timely. This patch adds a new hwtstamp_config flag HWTSTAMP_FLAG_BONDED_PHC_INDEX. When the user wants to get the bond active interface's PHC, they need to add this flag and be aware the PHC index may be changed. With the new flag. All flag checks in current drivers are removed. Only the checking in net_hwtstamp_validate() is kept. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-13bpf: Let bpf_warn_invalid_xdp_action() report more infoPaolo Abeni
In non trivial scenarios, the action id alone is not sufficient to identify the program causing the warning. Before the previous patch, the generated stack-trace pointed out at least the involved device driver. Let's additionally include the program name and id, and the relevant device name. If the user needs additional infos, he can fetch them via a kernel probe, leveraging the arguments added here. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/ddb96bb975cbfddb1546cf5da60e77d5100b533c.1638189075.git.pabeni@redhat.com
2021-12-13net: bcmgenet: Fix NULL vs IS_ERR() checkingMiaoqian Lin
The phy_attach() function does not return NULL. It returns error pointers. Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-03net: bcm4908: Handle dma_set_coherent_mask error codesJiasheng Jiang
The return value of dma_set_coherent_mask() is not always 0. To catch the exception in case that dma is not support the mask. Fixes: 9d61d138ab30 ("net: broadcom: rename BCM4908 driver & update DT binding") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22ethtool: extend ringparam setting/getting API with rx_buf_lenHao Chen
Add two new parameters kernel_ringparam and extack for .get_ringparam and .set_ringparam to extend more ring params through netlink. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-20bnx2x: constify static inline stub for dev_addrJakub Kicinski
bnx2x_vfpf_config_mac() was constified by not its stub. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-19bnx2x: Use struct_group() for memcpy() regionKees Cook
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Use struct_group() in struct nig_stats around members egress_mac_pkt0_lo, egress_mac_pkt0_hi, egress_mac_pkt1_lo, and egress_mac_pkt1_hi (and the respective members in struct bnx2x_eth_stats), so they can be referenced together. This will allow memcpy() and sizeof() to more easily reason about sizes, improve readability, and avoid future warnings about writing beyond the end of struct bnx2x_eth_stats's rx_stat_ifhcinbadoctets_hi. "pahole" shows no size nor member offset changes to either struct. "objdump -d" shows no meaningful object code changes (i.e. only source line number induced differences and optimizations). Additionally adds BUILD_BUG_ON() to compare the separate struct group sizes. Reviewed-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Link: https://lore.kernel.org/lkml/DM5PR18MB2229B0413C372CC6E49D59A3B2C59@DM5PR18MB2229.namprd18.prod.outlook.com Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-16bnxt_en: Fix compile error regression when CONFIG_BNXT_SRIOV is not setMichael Chan
bp->sriov_cfg is not defined when CONFIG_BNXT_SRIOV is not set. Fix it by adding a helper function bnxt_sriov_cfg() to handle the logic with or without the config option. Fixes: 46d08f55d24e ("bnxt_en: extend RTNL to VF check in devlink driver_reinit") Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/1637090770-22835-1-git-send-email-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-21 21:59:29 +0000