summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom
AgeCommit message (Collapse)Author
10 daysbnxt_en: Set DMA unmap len correctly for XDP_REDIRECTSomnath Kotur
When transmitting an XDP_REDIRECT packet, call dma_unmap_len_set() with the proper length instead of 0. This bug triggers this warning on a system with IOMMU enabled: WARNING: CPU: 36 PID: 0 at drivers/iommu/dma-iommu.c:842 __iommu_dma_unmap+0x159/0x170 RIP: 0010:__iommu_dma_unmap+0x159/0x170 Code: a8 00 00 00 00 48 c7 45 b0 00 00 00 00 48 c7 45 c8 00 00 00 00 48 c7 45 a0 ff ff ff ff 4c 89 45 b8 4c 89 45 c0 e9 77 ff ff ff <0f> 0b e9 60 ff ff ff e8 8b bf 6a 00 66 66 2e 0f 1f 84 00 00 00 00 RSP: 0018:ff22d31181150c88 EFLAGS: 00010206 RAX: 0000000000002000 RBX: 00000000e13a0000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ff22d31181150cf0 R08: ff22d31181150ca8 R09: 0000000000000000 R10: 0000000000000000 R11: ff22d311d36c9d80 R12: 0000000000001000 R13: ff13544d10645010 R14: ff22d31181150c90 R15: ff13544d0b2bac00 FS: 0000000000000000(0000) GS:ff13550908a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005be909dacff8 CR3: 0008000173408003 CR4: 0000000000f71ef0 PKRU: 55555554 Call Trace: <IRQ> ? show_regs+0x6d/0x80 ? __warn+0x89/0x160 ? __iommu_dma_unmap+0x159/0x170 ? report_bug+0x17e/0x1b0 ? handle_bug+0x46/0x90 ? exc_invalid_op+0x18/0x80 ? asm_exc_invalid_op+0x1b/0x20 ? __iommu_dma_unmap+0x159/0x170 ? __iommu_dma_unmap+0xb3/0x170 iommu_dma_unmap_page+0x4f/0x100 dma_unmap_page_attrs+0x52/0x220 ? srso_alias_return_thunk+0x5/0xfbef5 ? xdp_return_frame+0x2e/0xd0 bnxt_tx_int_xdp+0xdf/0x440 [bnxt_en] __bnxt_poll_work_done+0x81/0x1e0 [bnxt_en] bnxt_poll+0xd3/0x1e0 [bnxt_en] Fixes: f18c2b77b2e4 ("bnxt_en: optimized XDP_REDIRECT support") Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250710213938.1959625-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
10 daysbnxt_en: Flush FW trace before copying to the coredumpShruti Parab
bnxt_fill_drv_seg_record() calls bnxt_dbg_hwrm_log_buffer_flush() to flush the FW trace buffer. This needs to be done before we call bnxt_copy_ctx_mem() to copy the trace data. Without this fix, the coredump may not contain all the FW traces. Fixes: 3c2179e66355 ("bnxt_en: Add FW trace coredump segments to the coredump") Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Shruti Parab <shruti.parab@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250710213938.1959625-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
10 daysbnxt_en: Fix DCB ETS validationShravya KN
In bnxt_ets_validate(), the code incorrectly loops over all possible traffic classes to check and add the ETS settings. Fix it to loop over the configured traffic classes only. The unconfigured traffic classes will default to TSA_ETS with 0 bandwidth. Looping over these unconfigured traffic classes may cause the validation to fail and trigger this error message: "rejecting ETS config starving a TC\n" The .ieee_setets() will then fail. Fixes: 7df4ae9fe855 ("bnxt_en: Implement DCBNL to support host-based DCBX.") Reviewed-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Shravya KN <shravya.k-n@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250710213938.1959625-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
13 daysnet: bcmgenet: Initialize u64 stats seq counterRyo Takakura
Initialize u64 stats as it uses seq counter on 32bit machines as suggested by lockdep below. [ 1.830953][ T1] INFO: trying to register non-static key. [ 1.830993][ T1] The code is fine but needs lockdep annotation, or maybe [ 1.831027][ T1] you didn't initialize this object before use? [ 1.831057][ T1] turning off the locking correctness validator. [ 1.831090][ T1] CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.16.0-rc2-v7l+ #1 PREEMPT [ 1.831097][ T1] Tainted: [W]=WARN [ 1.831099][ T1] Hardware name: BCM2711 [ 1.831101][ T1] Call trace: [ 1.831104][ T1] unwind_backtrace from show_stack+0x18/0x1c [ 1.831120][ T1] show_stack from dump_stack_lvl+0x8c/0xcc [ 1.831129][ T1] dump_stack_lvl from register_lock_class+0x9e8/0x9fc [ 1.831141][ T1] register_lock_class from __lock_acquire+0x420/0x22c0 [ 1.831154][ T1] __lock_acquire from lock_acquire+0x130/0x3f8 [ 1.831166][ T1] lock_acquire from bcmgenet_get_stats64+0x4a4/0x4c8 [ 1.831176][ T1] bcmgenet_get_stats64 from dev_get_stats+0x4c/0x408 [ 1.831184][ T1] dev_get_stats from rtnl_fill_stats+0x38/0x120 [ 1.831193][ T1] rtnl_fill_stats from rtnl_fill_ifinfo+0x7f8/0x1890 [ 1.831203][ T1] rtnl_fill_ifinfo from rtmsg_ifinfo_build_skb+0xd0/0x138 [ 1.831214][ T1] rtmsg_ifinfo_build_skb from rtmsg_ifinfo+0x48/0x8c [ 1.831225][ T1] rtmsg_ifinfo from register_netdevice+0x8c0/0x95c [ 1.831237][ T1] register_netdevice from register_netdev+0x28/0x40 [ 1.831247][ T1] register_netdev from bcmgenet_probe+0x690/0x6bc [ 1.831255][ T1] bcmgenet_probe from platform_probe+0x64/0xbc [ 1.831263][ T1] platform_probe from really_probe+0xd0/0x2d4 [ 1.831269][ T1] really_probe from __driver_probe_device+0x90/0x1a4 [ 1.831273][ T1] __driver_probe_device from driver_probe_device+0x38/0x11c [ 1.831278][ T1] driver_probe_device from __driver_attach+0x9c/0x18c [ 1.831282][ T1] __driver_attach from bus_for_each_dev+0x84/0xd4 [ 1.831291][ T1] bus_for_each_dev from bus_add_driver+0xd4/0x1f4 [ 1.831303][ T1] bus_add_driver from driver_register+0x88/0x120 [ 1.831312][ T1] driver_register from do_one_initcall+0x78/0x360 [ 1.831320][ T1] do_one_initcall from kernel_init_freeable+0x2bc/0x314 [ 1.831331][ T1] kernel_init_freeable from kernel_init+0x1c/0x144 [ 1.831339][ T1] kernel_init from ret_from_fork+0x14/0x20 [ 1.831344][ T1] Exception stack(0xf082dfb0 to 0xf082dff8) [ 1.831349][ T1] dfa0: 00000000 00000000 00000000 00000000 [ 1.831353][ T1] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.831356][ T1] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 Fixes: 59aa6e3072aa ("net: bcmgenet: switch to use 64bit statistics") Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Ryo Takakura <ryotkkr98@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250702092417.46486-1-ryotkkr98@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-07-04bnxt_en: eliminate the compile warning in bnxt_request_irq due to ↵Jason Xing
CONFIG_RFS_ACCEL I received a kernel-test-bot report[1] that shows the [-Wunused-but-set-variable] warning. Since the previous commit I made, as the 'Fixes' tag shows, gives users an option to turn on and off the CONFIG_RFS_ACCEL, the issue then can be discovered and reproduced with GCC specifically. Like Simon and Jakub suggested, use fewer #ifdefs which leads to fewer bugs. [1] All warnings (new ones prefixed by >>): drivers/net/ethernet/broadcom/bnxt/bnxt.c: In function 'bnxt_request_irq': >> drivers/net/ethernet/broadcom/bnxt/bnxt.c:10703:9: warning: variable 'j' set but not used [-Wunused-but-set-variable] 10703 | int i, j, rc = 0; | ^ Fixes: 9b6a30febddf ("net: allow rps/rfs related configs to be switched") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202506282102.x1tXt0qz-lkp@intel.com/ Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-06-24bnxt: properly flush XDP redirect listsYan Zhai
We encountered following crash when testing a XDP_REDIRECT feature in production: [56251.579676] list_add corruption. next->prev should be prev (ffff93120dd40f30), but was ffffb301ef3a6740. (next=ffff93120dd 40f30). [56251.601413] ------------[ cut here ]------------ [56251.611357] kernel BUG at lib/list_debug.c:29! [56251.621082] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [56251.632073] CPU: 111 UID: 0 PID: 0 Comm: swapper/111 Kdump: loaded Tainted: P O 6.12.33-cloudflare-2025.6. 3 #1 [56251.653155] Tainted: [P]=PROPRIETARY_MODULE, [O]=OOT_MODULE [56251.663877] Hardware name: MiTAC GC68B-B8032-G11P6-GPU/S8032GM-HE-CFR, BIOS V7.020.B10-sig 01/22/2025 [56251.682626] RIP: 0010:__list_add_valid_or_report+0x4b/0xa0 [56251.693203] Code: 0e 48 c7 c7 68 e7 d9 97 e8 42 16 fe ff 0f 0b 48 8b 52 08 48 39 c2 74 14 48 89 f1 48 c7 c7 90 e7 d9 97 48 89 c6 e8 25 16 fe ff <0f> 0b 4c 8b 02 49 39 f0 74 14 48 89 d1 48 c7 c7 e8 e7 d9 97 4c 89 [56251.725811] RSP: 0018:ffff93120dd40b80 EFLAGS: 00010246 [56251.736094] RAX: 0000000000000075 RBX: ffffb301e6bba9d8 RCX: 0000000000000000 [56251.748260] RDX: 0000000000000000 RSI: ffff9149afda0b80 RDI: ffff9149afda0b80 [56251.760349] RBP: ffff9131e49c8000 R08: 0000000000000000 R09: ffff93120dd40a18 [56251.772382] R10: ffff9159cf2ce1a8 R11: 0000000000000003 R12: ffff911a80850000 [56251.784364] R13: ffff93120fbc7000 R14: 0000000000000010 R15: ffff9139e7510e40 [56251.796278] FS: 0000000000000000(0000) GS:ffff9149afd80000(0000) knlGS:0000000000000000 [56251.809133] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [56251.819561] CR2: 00007f5e85e6f300 CR3: 00000038b85e2006 CR4: 0000000000770ef0 [56251.831365] PKRU: 55555554 [56251.838653] Call Trace: [56251.845560] <IRQ> [56251.851943] cpu_map_enqueue.cold+0x5/0xa [56251.860243] xdp_do_redirect+0x2d9/0x480 [56251.868388] bnxt_rx_xdp+0x1d8/0x4c0 [bnxt_en] [56251.877028] bnxt_rx_pkt+0x5f7/0x19b0 [bnxt_en] [56251.885665] ? cpu_max_write+0x1e/0x100 [56251.893510] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.902276] __bnxt_poll_work+0x190/0x340 [bnxt_en] [56251.911058] bnxt_poll+0xab/0x1b0 [bnxt_en] [56251.919041] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.927568] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.935958] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.944250] __napi_poll+0x2b/0x160 [56251.951155] bpf_trampoline_6442548651+0x79/0x123 [56251.959262] __napi_poll+0x5/0x160 [56251.966037] net_rx_action+0x3d2/0x880 [56251.973133] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.981265] ? srso_alias_return_thunk+0x5/0xfbef5 [56251.989262] ? __hrtimer_run_queues+0x162/0x2a0 [56251.996967] ? srso_alias_return_thunk+0x5/0xfbef5 [56252.004875] ? srso_alias_return_thunk+0x5/0xfbef5 [56252.012673] ? bnxt_msix+0x62/0x70 [bnxt_en] [56252.019903] handle_softirqs+0xcf/0x270 [56252.026650] irq_exit_rcu+0x67/0x90 [56252.032933] common_interrupt+0x85/0xa0 [56252.039498] </IRQ> [56252.044246] <TASK> [56252.048935] asm_common_interrupt+0x26/0x40 [56252.055727] RIP: 0010:cpuidle_enter_state+0xb8/0x420 [56252.063305] Code: dc 01 00 00 e8 f9 79 3b ff e8 64 f7 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 a5 32 3a ff 45 84 ff 0f 85 ae 01 00 00 fb 45 85 f6 <0f> 88 88 01 00 00 48 8b 04 24 49 63 ce 4c 89 ea 48 6b f1 68 48 29 [56252.088911] RSP: 0018:ffff93120c97fe98 EFLAGS: 00000202 [56252.096912] RAX: ffff9149afd80000 RBX: ffff9141d3a72800 RCX: 0000000000000000 [56252.106844] RDX: 00003329176c6b98 RSI: ffffffe36db3fdc7 RDI: 0000000000000000 [56252.116733] RBP: 0000000000000002 R08: 0000000000000002 R09: 000000000000004e [56252.126652] R10: ffff9149afdb30c4 R11: 071c71c71c71c71c R12: ffffffff985ff860 [56252.136637] R13: 00003329176c6b98 R14: 0000000000000002 R15: 0000000000000000 [56252.146667] ? cpuidle_enter_state+0xab/0x420 [56252.153909] cpuidle_enter+0x2d/0x40 [56252.160360] do_idle+0x176/0x1c0 [56252.166456] cpu_startup_entry+0x29/0x30 [56252.173248] start_secondary+0xf7/0x100 [56252.179941] common_startup_64+0x13e/0x141 [56252.186886] </TASK> From the crash dump, we found that the cpu_map_flush_list inside redirect info is partially corrupted: its list_head->next points to itself, but list_head->prev points to a valid list of unflushed bq entries. This turned out to be a result of missed XDP flush on redirect lists. By digging in the actual source code, we found that commit 7f0a168b0441 ("bnxt_en: Add completion ring pointer in TX and RX ring structures") incorrectly overwrites the event mask for XDP_REDIRECT in bnxt_rx_xdp. We can stably reproduce this crash by returning XDP_TX and XDP_REDIRECT randomly for incoming packets in a naive XDP program. Properly propagate the XDP_REDIRECT events back fixes the crash. Fixes: a7559bc8c17c ("bnxt: support transmit and free of aggregation buffers") Tested-by: Andrew Rzeznik <arzeznik@cloudflare.com> Signed-off-by: Yan Zhai <yan@cloudflare.com> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Link: https://patch.msgid.link/aFl7jpCNzscumuN2@debian.debian Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17bnxt_en: Update MRU and RSS table of RSS contexts on queue resetPavan Chebbi
The commit under the Fixes tag below which updates the VNICs' RSS and MRU during .ndo_queue_start(), needs to be extended to cover any non-default RSS contexts which have their own VNICs. Without this step, packets that are destined to a non-default RSS context may be dropped after .ndo_queue_start(). We further optimize this scheme by updating the VNIC only if the RX ring being restarted is in the RSS table of the VNIC. Updating the VNIC (in particular setting the MRU to 0) will momentarily stop all traffic to all rings in the RSS table. Any VNIC that has the RX ring excluded from the RSS table can skip this step and avoid the traffic disruption. Note that this scheme is just an improvement. A VNIC with multiple rings in the RSS table will still see traffic disruptions to all rings in the RSS table when one of the rings is being restarted. We are working on a FW scheme that will improve upon this further. Fixes: 5ac066b7b062 ("bnxt_en: Fix queue start to update vnic RSS table") Reported-by: David Wei <dw@davidwei.uk> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250613231841.377988-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17bnxt_en: Add a helper function to configure MRU and RSSPavan Chebbi
Add a new helper function that will configure MRU and RSS table of a VNIC. This will be useful when we configure both on a VNIC when resetting an RX ring. This function will be used again in the next bug fix patch where we have to reconfigure VNICs for RSS contexts. Suggested-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: David Wei <dw@davidwei.uk> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250613231841.377988-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-17bnxt_en: Fix double invocation of bnxt_ulp_stop()/bnxt_ulp_start()Kalesh AP
Before the commit under the Fixes tag below, bnxt_ulp_stop() and bnxt_ulp_start() were always invoked in pairs. After that commit, the new bnxt_ulp_restart() can be invoked after bnxt_ulp_stop() has been called. This may result in the RoCE driver's aux driver .suspend() method being invoked twice. The 2nd bnxt_re_suspend() call will crash when it dereferences a NULL pointer: (NULL ib_device): Handle device suspend call BUG: kernel NULL pointer dereference, address: 0000000000000b78 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 20 UID: 0 PID: 181 Comm: kworker/u96:5 Tainted: G S 6.15.0-rc1 #4 PREEMPT(voluntary) Tainted: [S]=CPU_OUT_OF_SPEC Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 Workqueue: bnxt_pf_wq bnxt_sp_task [bnxt_en] RIP: 0010:bnxt_re_suspend+0x45/0x1f0 [bnxt_re] Code: 8b 05 a7 3c 5b f5 48 89 44 24 18 31 c0 49 8b 5c 24 08 4d 8b 2c 24 e8 ea 06 0a f4 48 c7 c6 04 60 52 c0 48 89 df e8 1b ce f9 ff <48> 8b 83 78 0b 00 00 48 8b 80 38 03 00 00 a8 40 0f 85 b5 00 00 00 RSP: 0018:ffffa2e84084fd88 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffffb4b6b934 RDI: 00000000ffffffff RBP: ffffa1760954c9c0 R08: 0000000000000000 R09: c0000000ffffdfff R10: 0000000000000001 R11: ffffa2e84084fb50 R12: ffffa176031ef070 R13: ffffa17609775000 R14: ffffa17603adc180 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffa17daa397000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000b78 CR3: 00000004aaa30003 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> bnxt_ulp_stop+0x69/0x90 [bnxt_en] bnxt_sp_task+0x678/0x920 [bnxt_en] ? __schedule+0x514/0xf50 process_scheduled_works+0x9d/0x400 worker_thread+0x11c/0x260 ? __pfx_worker_thread+0x10/0x10 kthread+0xfe/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2b/0x40 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 Check the BNXT_EN_FLAG_ULP_STOPPED flag and do not proceed if the flag is already set. This will preserve the original symmetrical bnxt_ulp_stop() and bnxt_ulp_start(). Also, inside bnxt_ulp_start(), clear the BNXT_EN_FLAG_ULP_STOPPED flag after taking the mutex to avoid any race condition. And for symmetry, only proceed in bnxt_ulp_start() if the BNXT_EN_FLAG_ULP_STOPPED is set. Fixes: 3c163f35bd50 ("bnxt_en: Optimize recovery path ULP locking in the driver") Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Co-developed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250613231841.377988-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-08treewide, timers: Rename from_timer() to timer_container_of()Ingo Molnar
Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
2025-06-04Merge tag 'pci-v6.16-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Print the actual delay time in pci_bridge_wait_for_secondary_bus() instead of assuming it was 1000ms (Wilfred Mallawa) - Revert 'iommu/amd: Prevent binding other PCI drivers to IOMMU PCI devices', which broke resume from system sleep on AMD platforms and has been fixed by other commits (Lukas Wunner) Resource management: - Remove mtip32xx use of pcim_iounmap_regions(), which is deprecated and unnecessary (Philipp Stanner) - Remove pcim_iounmap_regions() and pcim_request_region_exclusive() and related flags since all uses have been removed (Philipp Stanner) - Rework devres 'request' functions so they are no longer 'hybrid', i.e., their behavior no longer depends on whether pcim_enable_device or pci_enable_device() was used, and remove related code (Philipp Stanner) - Warn (not BUG()) about failure to assign optional resources (Ilpo Järvinen) Error handling: - Log the DPC Error Source ID only when it's actually valid (when ERR_FATAL or ERR_NONFATAL was received from a downstream device) and decode into bus/device/function (Bjorn Helgaas) - Determine AER log level once and save it so all related messages use the same level (Karolina Stolarek) - Use KERN_WARNING, not KERN_ERR, when logging PCIe Correctable Errors (Karolina Stolarek) - Ratelimit PCIe Correctable and Non-Fatal error logging, with sysfs controls on interval and burst count, to avoid flooding logs and RCU stall warnings (Jon Pan-Doh) Power management: - Increment PM usage counter when probing reset methods so we don't try to read config space of a powered-off device (Alex Williamson) - Set all devices to D0 during enumeration to ensure ACPI opregion is connected via _REG (Mario Limonciello) Power control: - Rename pwrctrl Kconfig symbols from 'PWRCTL' to 'PWRCTRL' to match the filename paths. Retain old deprecated symbols for compatibility, except for the pwrctrl slot driver (PCI_PWRCTRL_SLOT) (Johan Hovold) - When unregistering pwrctrl, cancel outstanding rescan work before cleaning up data structures to avoid use-after-free issues (Brian Norris) Bandwidth control: - Simplify link bandwidth controller by replacing the count of Link Bandwidth Management Status (LBMS) events with a PCI_LINK_LBMS_SEEN flag (Ilpo Järvinen) - Update the Link Speed after retraining, since the Link Speed may have changed (Ilpo Järvinen) PCIe native device hotplug: - Ignore Presence Detect Changed caused by DPC. pciehp already ignores Link Down/Up events caused by DPC, but on slots using in-band presence detect, DPC causes a spurious Presence Detect Changed event (Lukas Wunner) - Ignore Link Down/Up caused by Secondary Bus Reset. On hotplug ports using in-band presence detect, the reset causes a Presence Detect Changed event, which mistakenly caused teardown and re-enumeration of the device. Drivers may need to annotate code that resets their device (Lukas Wunner) Virtualization: - Add an ACS quirk for Loongson Root Ports that don't advertise ACS but don't allow peer-to-peer transactions between Root Ports; the quirk allows each Root Port to be in a separate IOMMU group (Huacai Chen) Endpoint framework: - For fixed-size BARs, retain both the actual size and the possibly larger size allocated to accommodate iATU alignment requirements (Jerome Brunet) - Simplify ctrl/SPAD space allocation and avoid allocating more space than needed (Jerome Brunet) - Correct MSI-X PBA offset calculations for DesignWare and Cadence endpoint controllers (Niklas Cassel) - Align the return value (number of interrupts) encoding for pci_epc_get_msi()/pci_epc_ops::get_msi() and pci_epc_get_msix()/pci_epc_ops::get_msix() (Niklas Cassel) - Align the nr_irqs parameter encoding for pci_epc_set_msi()/pci_epc_ops::set_msi() and pci_epc_set_msix()/pci_epc_ops::set_msix() (Niklas Cassel) Common host controller library: - Convert pci-host-common to a library so platforms that don't need native host controller drivers don't need to include these helper functions (Manivannan Sadhasivam) Apple PCIe controller driver: - Extract ECAM bridge creation helper from pci_host_common_probe() to separate driver-specific things like MSI from PCI things (Marc Zyngier) - Dynamically allocate RID-to_SID bitmap to prepare for SoCs with varying capabilities (Marc Zyngier) - Skip ports disabled in DT when setting up ports (Janne Grunau) - Add t6020 compatible string (Alyssa Rosenzweig) - Add T602x PCIe support (Hector Martin) - Directly set/clear INTx mask bits because T602x dropped the accessors that could do this without locking (Marc Zyngier) - Move port PHY registers to their own reg items to accommodate T602x, which moves them around; retain default offsets for existing DTs that lack phy%d entries with the reg offsets (Hector Martin) - Stop polling for core refclk, which doesn't work on T602x and the bootloader has already done anyway (Hector Martin) - Use gpiod_set_value_cansleep() when asserting PERST# in probe because we're allowed to sleep there (Hector Martin) Cadence PCIe controller driver: - Drop a runtime PM 'put' to resolve a runtime atomic count underflow (Hans Zhang) - Make the cadence core buildable as a module (Kishon Vijay Abraham I) - Add cdns_pcie_host_disable() and cdns_pcie_ep_disable() for use by loadable drivers when they are removed (Siddharth Vadapalli) Freescale i.MX6 PCIe controller driver: - Apply link training workaround only on IMX6Q, IMX6SX, IMX6SP (Richard Zhu) - Remove redundant dw_pcie_wait_for_link() from imx_pcie_start_link(); since the DWC core does this, imx6 only needs it when retraining for a faster link speed (Richard Zhu) - Toggle i.MX95 core reset to align with PHY powerup (Richard Zhu) - Set SYS_AUX_PWR_DET to work around i.MX95 ERR051624 erratum: in some cases, the controller can't exit 'L23 Ready' through Beacon or PERST# deassertion (Richard Zhu) - Clear GEN3_ZRXDC_NONCOMPL to work around i.MX95 ERR051586 erratum: controller can't meet 2.5 GT/s ZRX-DC timing when operating at 8 GT/s, causing timeouts in L1 (Richard Zhu) - Wait for i.MX95 PLL lock before enabling controller (Richard Zhu) - Save/restore i.MX95 LUT for suspend/resume (Richard Zhu) Mobiveil PCIe controller driver: - Return bool (not int) for link-up check in mobiveil_pab_ops.link_up() and layerscape-gen4, mobiveil (Hans Zhang) NVIDIA Tegra194 PCIe controller driver: - Create debugfs directory for 'aspm_state_cnt' only when CONFIG_PCIEASPM is enabled, since there are no other entries (Hans Zhang) Qualcomm PCIe controller driver: - Add OF support for parsing DT 'eq-presets-<N>gts' property for lane equalization presets (Krishna Chaitanya Chundru) - Read Maximum Link Width from the Link Capabilities register if DT lacks 'num-lanes' property (Krishna Chaitanya Chundru) - Add Physical Layer 64 GT/s Capability ID and register offsets for 8, 32, and 64 GT/s lane equalization registers (Krishna Chaitanya Chundru) - Add generic dwc support for configuring lane equalization presets (Krishna Chaitanya Chundru) - Add DT and driver support for PCIe on IPQ5018 SoC (Nitheesh Sekar) Renesas R-Car PCIe controller driver: - Describe endpoint BAR 4 as being fixed size (Jerome Brunet) - Document how to obtain R-Car V4H (r8a779g0) controller firmware (Yoshihiro Shimoda) Rockchip PCIe controller driver: - Reorder rockchip_pci_core_rsts because reset_control_bulk_deassert() deasserts in reverse order, to fix a link training regression (Jensen Huang) - Mark RK3399 as being capable of raising INTx interrupts (Niklas Cassel) Rockchip DesignWare PCIe controller driver: - Check only PCIE_LINKUP, not LTSSM status, to determine whether the link is up (Shawn Lin) - Increase N_FTS (used in L0s->L0 transitions) and enable ASPM L0s for Root Complex and Endpoint modes (Shawn Lin) - Hide the broken ATS Capability in rockchip_pcie_ep_init() instead of rockchip_pcie_ep_pre_init() so it stays hidden after PERST# resets non-sticky registers (Shawn Lin) - Call phy_power_off() before phy_exit() in rockchip_pcie_phy_deinit() (Diederik de Haas) Synopsys DesignWare PCIe controller driver: - Set PORT_LOGIC_LINK_WIDTH to one lane to make initial link training more robust; this will not affect the intended link width if all lanes are functional (Wenbin Yao) - Return bool (not int) for link-up check in dw_pcie_ops.link_up() and armada8k, dra7xx, dw-rockchip, exynos, histb, keembay, keystone, kirin, meson, qcom, qcom-ep, rcar_gen4, spear13xx, tegra194, uniphier, visconti (Hans Zhang) - Add debugfs support for exposing DWC device-specific PTM context (Manivannan Sadhasivam) TI J721E PCIe driver: - Make j721e buildable as a loadable and removable module (Siddharth Vadapalli) - Fix j721e host/endpoint dependencies that result in link failures in some configs (Arnd Bergmann) Device tree bindings: - Add qcom DT binding for 'global' interrupt (PCIe controller and link-specific events) for ipq8074, ipq8074-gen3, ipq6018, sa8775p, sc7280, sc8180x sdm845, sm8150, sm8250, sm8350 (Manivannan Sadhasivam) - Add qcom DT binding for 8 MSI SPI interrupts for msm8998, ipq8074, ipq8074-gen3, ipq6018 (Manivannan Sadhasivam) - Add dw rockchip DT binding for rk3576 and rk3562 (Kever Yang) - Correct indentation and style of examples in brcm,stb-pcie, cdns,cdns-pcie-ep, intel,keembay-pcie-ep, intel,keembay-pcie, microchip,pcie-host, rcar-pci-ep, rcar-pci-host, xilinx-versal-cpm (Krzysztof Kozlowski) - Convert Marvell EBU (dove, kirkwood, armada-370, armada-xp) and armada8k from text to schema DT bindings (Rob Herring) - Remove obsolete .txt DT bindings for content that has been moved to schemas (Rob Herring) - Add qcom DT binding for MHI registers in IPQ5332, IPQ6018, IPQ8074 and IPQ9574 (Varadarajan Narayanan) - Convert v3,v360epc-pci from text to DT schema binding (Rob Herring) - Change microchip,pcie-host DT binding to be 'dma-noncoherent' since PolarFire may be configured that way (Conor Dooley) Miscellaneous: - Drop 'pci' suffix from intel_mid_pci.c filename to match similar files (Andy Shevchenko) - All platforms with PCI have an MMU, so add PCI Kconfig dependency on MMU to simplify build testing and avoid inadvertent build regressions (Arnd Bergmann) - Update Krzysztof Wilczyński's email address in MAINTAINERS (Krzysztof Wilczyński) - Update Manivannan Sadhasivam's email address in MAINTAINERS (Manivannan Sadhasivam)" * tag 'pci-v6.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (147 commits) MAINTAINERS: Update Manivannan Sadhasivam email address PCI: j721e: Fix host/endpoint dependencies PCI: j721e: Add support to build as a loadable module PCI: cadence-ep: Introduce cdns_pcie_ep_disable() helper for cleanup PCI: cadence-host: Introduce cdns_pcie_host_disable() helper for cleanup PCI: cadence: Add support to build pcie-cadence library as a kernel module MAINTAINERS: Update Krzysztof Wilczyński email address PCI: Remove unnecessary linesplit in __pci_setup_bridge() PCI: WARN (not BUG()) when we fail to assign optional resources PCI: Remove unused pci_printk() PCI: qcom: Replace PERST# sleep time with proper macro PCI: dw-rockchip: Replace PERST# sleep time with proper macro PCI: host-common: Convert to library for host controller drivers PCI/ERR: Remove misleading TODO regarding kernel panic PCI: cadence: Remove duplicate message code definitions PCI: endpoint: Align pci_epc_set_msix(), pci_epc_ops::set_msix() nr_irqs encoding PCI: endpoint: Align pci_epc_set_msi(), pci_epc_ops::set_msi() nr_irqs encoding PCI: endpoint: Align pci_epc_get_msix(), pci_epc_ops::get_msix() return value encoding PCI: endpoint: Align pci_epc_get_msi(), pci_epc_ops::get_msi() return value encoding PCI: cadence-ep: Correct PBA offset in .set_msix() callback ...
2025-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.15-rc8). Conflicts: 80f2ab46c2ee ("irdma: free iwdev->rf after removing MSI-X") 4bcc063939a5 ("ice, irdma: fix an off by one in error handling code") c24a65b6a27c ("iidc/ice/irdma: Update IDC to support multiple consumers") https://lore.kernel.org/20250513130630.280ee6c5@canb.auug.org.au No extra adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-22eth: bnxt: fix deadlock when xdp is attached or detachedTaehee Yoo
When xdp is attached or detached, dev->ndo_bpf() is called by do_setlink(), and it acquires netdev_lock() if needed. Unlike other drivers, the bnxt driver is protected by netdev_lock while xdp is attached/detached because it sets dev->request_ops_lock to true. So, the bnxt_xdp(), that is callback of ->ndo_bpf should not acquire netdev_lock(). But the xdp_features_{set | clear}_redirect_target() was changed to acquire netdev_lock() internally. It causes a deadlock. To fix this problem, bnxt driver should use xdp_features_{set | clear}_redirect_target_locked() instead. Splat looks like: ============================================ WARNING: possible recursive locking detected 6.15.0-rc6+ #1 Not tainted -------------------------------------------- bpftool/1745 is trying to acquire lock: ffff888131b85038 (&dev->lock){+.+.}-{4:4}, at: xdp_features_set_redirect_target+0x1f/0x80 but task is already holding lock: ffff888131b85038 (&dev->lock){+.+.}-{4:4}, at: do_setlink.constprop.0+0x24e/0x35d0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&dev->lock); lock(&dev->lock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by bpftool/1745: #0: ffffffffa56131c8 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_setlink+0x1fe/0x570 #1: ffffffffaafa75a0 (&net->rtnl_mutex){+.+.}-{4:4}, at: rtnl_setlink+0x236/0x570 #2: ffff888131b85038 (&dev->lock){+.+.}-{4:4}, at: do_setlink.constprop.0+0x24e/0x35d0 stack backtrace: CPU: 1 UID: 0 PID: 1745 Comm: bpftool Not tainted 6.15.0-rc6+ #1 PREEMPT(undef) Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 Call Trace: <TASK> dump_stack_lvl+0x7a/0xd0 print_deadlock_bug+0x294/0x3d0 __lock_acquire+0x153b/0x28f0 lock_acquire+0x184/0x340 ? xdp_features_set_redirect_target+0x1f/0x80 __mutex_lock+0x1ac/0x18a0 ? xdp_features_set_redirect_target+0x1f/0x80 ? xdp_features_set_redirect_target+0x1f/0x80 ? __pfx_bnxt_rx_page_skb+0x10/0x10 [bnxt_en ? __pfx___mutex_lock+0x10/0x10 ? __pfx_netdev_update_features+0x10/0x10 ? bnxt_set_rx_skb_mode+0x284/0x540 [bnxt_en ? __pfx_bnxt_set_rx_skb_mode+0x10/0x10 [bnxt_en ? xdp_features_set_redirect_target+0x1f/0x80 xdp_features_set_redirect_target+0x1f/0x80 bnxt_xdp+0x34e/0x730 [bnxt_en 11cbcce8fa11cff1dddd7ef358d6219e4ca9add3] dev_xdp_install+0x3f4/0x830 ? __pfx_bnxt_xdp+0x10/0x10 [bnxt_en 11cbcce8fa11cff1dddd7ef358d6219e4ca9add3] ? __pfx_dev_xdp_install+0x10/0x10 dev_xdp_attach+0x560/0xf70 dev_change_xdp_fd+0x22d/0x280 do_setlink.constprop.0+0x2989/0x35d0 ? __pfx_do_setlink.constprop.0+0x10/0x10 ? lock_acquire+0x184/0x340 ? find_held_lock+0x32/0x90 ? rtnl_setlink+0x236/0x570 ? rcu_is_watching+0x11/0xb0 ? trace_contention_end+0xdc/0x120 ? __mutex_lock+0x946/0x18a0 ? __pfx___mutex_lock+0x10/0x10 ? __lock_acquire+0xa95/0x28f0 ? rcu_is_watching+0x11/0xb0 ? rcu_is_watching+0x11/0xb0 ? cap_capable+0x172/0x350 rtnl_setlink+0x2cd/0x570 Fixes: 03df156dd3a6 ("xdp: double protect netdev->xdp_flags with netdev->lock") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250520071155.2462843-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-20bnxt_en: Fix netdev locking in ULP IRQ functionsMichael Chan
netdev_lock is already held when calling bnxt_ulp_irq_stop() and bnxt_ulp_irq_restart(). When converting rtnl_lock to netdev_lock, the original code was rtnl_dereference() to indicate that rtnl_lock was already held. rcu_dereference_protected() is the correct conversion after replacing rtnl_lock with netdev_lock. Add a new helper netdev_lock_dereference() similar to rtnl_dereference(). Fixes: 004b5008016a ("eth: bnxt: remove most dependencies on RTNL") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250519204130.3097027-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-20net: bcmgenet: expose more stats in ethtoolZak Kemble
Expose more per-queue and overall stats in ethtool Signed-off-by: Zak Kemble <zakkemble@gmail.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250519113257.1031-4-zakkemble@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-20net: bcmgenet: count hw discarded packets in missed statZak Kemble
Hardware discarded packets are now counted in their own missed stat instead of being lumped in with general errors. Signed-off-by: Zak Kemble <zakkemble@gmail.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250519113257.1031-3-zakkemble@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-20net: bcmgenet: switch to use 64bit statisticsZak Kemble
Update the driver to use ndo_get_stats64, rtnl_link_stats64 and u64_stats_t counters for statistics. Signed-off-by: Zak Kemble <zakkemble@gmail.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250519113257.1031-2-zakkemble@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-20net: phy: fixed_phy: remove irq argument from fixed_phy_registerHeiner Kallweit
All callers pass PHY_POLL, therefore remove irq argument from fixed_phy_register(). Note: I keep the irq argument in fixed_phy_add_gpiod() for now, for the case that somebody may want to use a GPIO interrupt in the future, by e.g. adding a call to fwnode_irq_get() to fixed_phy_get_gpiod(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/31cdb232-a5e9-4997-a285-cb9a7d208124@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.15-rc7). Conflicts: tools/testing/selftests/drivers/net/hw/ncdevmem.c 97c4e094a4b2 ("tests/ncdevmem: Fix double-free of queue array") 2f1a805f32ba ("selftests: ncdevmem: Implement devmem TCP TX") https://lore.kernel.org/20250514122900.1e77d62d@canb.auug.org.au Adjacent changes: net/core/devmem.c net/core/devmem.h 0afc44d8cdf6 ("net: devmem: fix kernel panic when netlink socket close after module unload") bd61848900bf ("net: devmem: Implement TX path") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-15bnxt_en: bring back rtnl_lock() in the bnxt_open() pathMichael Chan
Error recovery, PCIe AER, resume, and TX timeout will invoke bnxt_open() with netdev_lock only. This will cause RTNL assert failure in netif_set_real_num_tx_queues(), netif_set_real_num_tx_queues(), and netif_set_real_num_tx_queues(). Example error recovery assert: RTNL: assertion failed at net/core/dev.c (3178) WARNING: CPU: 3 PID: 3392 at net/core/dev.c:3178 netif_set_real_num_tx_queues+0x1fd/0x210 Call Trace: <TASK> ? __pfx_bnxt_msix+0x10/0x10 [bnxt_en] __bnxt_open_nic+0x1ef/0xb20 [bnxt_en] bnxt_open+0xda/0x130 [bnxt_en] bnxt_fw_reset_task+0x21f/0x780 [bnxt_en] process_scheduled_works+0x9d/0x400 For now, bring back rtnl_lock() in all these code paths that can invoke bnxt_open(). In the bnxt_queue_start() error path, we don't have rtnl_lock held so we just change it to call netif_close() instead of bnxt_reset_task() for simplicity. This error path is unlikely so it should be fine. Fixes: 004b5008016a ("eth: bnxt: remove most dependencies on RTNL") Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250514062908.2766677-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-14net/tg3: use crc32() instead of hand-rolled equivalentEric Biggers
The calculation done by calc_crc() is equivalent to ~crc32(~0, buf, len), so just use that instead. Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://patch.msgid.link/20250513041402.541527-1-ebiggers@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.15-rc5). No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-01bnxt_en: fix module unload sequenceVadim Fedorenko
Recent updates to the PTP part of bnxt changed the way PTP FIFO is cleared, skbs waiting for TX timestamps are now cleared during ndo_close() call. To do clearing procedure, the ptp structure must exist and point to a valid address. Module destroy sequence had ptp clear code running before netdev close causing invalid memory access and kernel crash. Change the sequence to destroy ptp structure after device close. Fixes: 8f7ae5a85137 ("bnxt_en: improve TX timestamping FIFO configuration") Reported-by: Taehee Yoo <ap420073@gmail.com> Closes: https://lore.kernel.org/netdev/CAMArcTWDe2cd41=ub=zzvYifaYcYv-N-csxfqxUvejy_L0D6UQ@mail.gmail.com/ Signed-off-by: Vadim Fedorenko <vadfed@meta.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Tested-by: Taehee Yoo <ap420073@gmail.com> Link: https://patch.msgid.link/20250430170343.759126-1-vadfed@meta.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-30bnxt_en: Fix ethtool -d byte order for 32-bit valuesMichael Chan
For version 1 register dump that includes the PCIe stats, the existing code incorrectly assumes that all PCIe stats are 64-bit values. Fix it by using an array containing the starting and ending index of the 32-bit values. The loop in bnxt_get_regs() will use the array to do proper endian swap for the 32-bit values. Fixes: b5d600b027eb ("bnxt_en: Add support for 'ethtool -d'") Reviewed-by: Shruti Parab <shruti.parab@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-04-30bnxt_en: Fix out-of-bound memcpy() during ethtool -wShruti Parab
When retrieving the FW coredump using ethtool, it can sometimes cause memory corruption: BUG: KFENCE: memory corruption in __bnxt_get_coredump+0x3ef/0x670 [bnxt_en] Corrupted memory at 0x000000008f0f30e8 [ ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ] (in kfence-#45): __bnxt_get_coredump+0x3ef/0x670 [bnxt_en] ethtool_get_dump_data+0xdc/0x1a0 __dev_ethtool+0xa1e/0x1af0 dev_ethtool+0xa8/0x170 dev_ioctl+0x1b5/0x580 sock_do_ioctl+0xab/0xf0 sock_ioctl+0x1ce/0x2e0 __x64_sys_ioctl+0x87/0xc0 do_syscall_64+0x5c/0xf0 entry_SYSCALL_64_after_hwframe+0x78/0x80 ... This happens when copying the coredump segment list in bnxt_hwrm_dbg_dma_data() with the HWRM_DBG_COREDUMP_LIST FW command. The info->dest_buf buffer is allocated based on the number of coredump segments returned by the FW. The segment list is then DMA'ed by the FW and the length of the DMA is returned by FW. The driver then copies this DMA'ed segment list to info->dest_buf. In some cases, this DMA length may exceed the info->dest_buf length and cause the above BUG condition. Fix it by capping the copy length to not exceed the length of info->dest_buf. The extra DMA data contains no useful information. This code path is shared for the HWRM_DBG_COREDUMP_LIST and the HWRM_DBG_COREDUMP_RETRIEVE FW commands. The buffering is different for these 2 FW commands. To simplify the logic, we need to move the line to adjust the buffer length for HWRM_DBG_COREDUMP_RETRIEVE up, so that the new check to cap the copy length will work for both commands. Fixes: c74751f4c392 ("bnxt_en: Return error if FW returns more data than dump length") Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Shruti Parab <shruti.parab@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-04-30bnxt_en: Fix coredump logic to free allocated bufferShruti Parab
When handling HWRM_DBG_COREDUMP_LIST FW command in bnxt_hwrm_dbg_dma_data(), the allocated buffer info->dest_buf is not freed in the error path. In the normal path, info->dest_buf is assigned to coredump->data and it will eventually be freed after the coredump is collected. Free info->dest_buf immediately inside bnxt_hwrm_dbg_dma_data() in the error path. Fixes: c74751f4c392 ("bnxt_en: Return error if FW returns more data than dump length") Reported-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Shruti Parab <shruti.parab@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-04-30bnxt_en: delay pci_alloc_irq_vectors() in the AER pathKashyap Desai
This patch is similar to the last patch to delay the pci_alloc_irq_vectors() call in the AER path until after calling bnxt_reserve_rings(). bnxt_reserve_rings() needs to properly map the MSIX table first before we call pci_alloc_irq_vectors() which may immediately write to the MSIX table in some architectures. Move the bnxt_init_int_mode() call from bnxt_io_slot_reset() to bnxt_io_resume() after calling bnxt_reserve_rings(). With this change, the AER path may call bnxt_open() -> bnxt_hwrm_if_change() with bp->irq_tbl set to NULL. bp->irq_tbl is cleared when we call bnxt_clear_int_mode() in bnxt_io_slot_reset(). So we cannot use !bp->irq_tbl to detect aborted FW reset. Add a new BNXT_FW_RESET_STATE_ABORT to detect aborted FW reset in bnxt_hwrm_if_change(). Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-04-30bnxt_en: call pci_alloc_irq_vectors() after bnxt_reserve_rings()Kashyap Desai
On some architectures (e.g. ARM), calling pci_alloc_irq_vectors() will immediately cause the MSIX table to be written. This will not work if we haven't called bnxt_reserve_rings() to properly map the MSIX table to the MSIX vectors reserved by FW. Fix the FW error recovery path to delay the bnxt_init_int_mode() -> pci_alloc_irq_vectors() call by removing it from bnxt_hwrm_if_change(). bnxt_request_irq() later in the code path will call it and by then the MSIX table is properly mapped. Fixes: 4343838ca5eb ("bnxt_en: Replace deprecated PCI MSIX APIs") Suggested-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-04-30bnxt_en: Add missing skb_mark_for_recycle() in bnxt_rx_vlan()Somnath Kotur
If bnxt_rx_vlan() fails because the VLAN protocol ID is invalid, the SKB is freed but we're missing the call to recycle it. This may cause the warning: "page_pool_release_retry() stalled pool shutdown" Add the missing skb_mark_for_recycle() in bnxt_rx_vlan(). Fixes: 86b05508f775 ("bnxt_en: Use the unified RX page pool buffers for XDP and non-XDP") Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-04-30bnxt_en: Fix ethtool selftest output in one of the failure casesKalesh AP
When RDMA driver is loaded, running offline self test is not supported and driver returns failure early. But it is not clearing the input buffer and hence the application prints some junk characters for individual test results. Fix it by clearing the buffer before returning. Fixes: 895621f1c816 ("bnxt_en: Don't support offline self test when RoCE driver is loaded") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-04-30bnxt_en: Fix error handling path in bnxt_init_chip()Shravya KN
WARN_ON() is triggered in __flush_work() if bnxt_init_chip() fails because we call cancel_work_sync() on dim work that has not been initialized. WARNING: CPU: 37 PID: 5223 at kernel/workqueue.c:4201 __flush_work.isra.0+0x212/0x230 The driver relies on the BNXT_STATE_NAPI_DISABLED bit to check if dim work has already been cancelled. But in the bnxt_open() path, BNXT_STATE_NAPI_DISABLED is not set and this causes the error path to think that it needs to cancel the uninitalized dim work. Fix it by setting BNXT_STATE_NAPI_DISABLED during initialization. The bit will be cleared when we enable NAPI and initialize dim work. Fixes: 40452969a506 ("bnxt_en: Fix DIM shutdown") Suggested-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Shravya KN <shravya.k-n@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2025-04-25bnxt_en: improve TX timestamping FIFO configurationVadim Fedorenko
Reconfiguration of netdev may trigger close/open procedure which can break FIFO status by adjusting the amount of empty slots for TX timestamps. But it is not really needed because timestamps for the packets sent over the wire still can be retrieved. On the other side, during netdev close procedure any skbs waiting for TX timestamps can be leaked because there is no cleaning procedure called. Free skbs waiting for TX timestamps when closing netdev. Fixes: 8aa2a79e9b95 ("bnxt_en: Increase the max total outstanding PTP TX packets to 4") Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Vadim Fedorenko <vadfed@meta.com> Link: https://patch.msgid.link/20250424125547.460632-1-vadfed@meta.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-24net: bcmasp: Add support for asp-v3.0Justin Chen
The asp-v3.0 is a major HW revision that reduced the number of channels and filters. The goal was to save cost by reducing the feature set. Changes for asp-v3.0 - Number of network filters were reduced. - Number of channels were reduced. - EDPKT stats were removed. - Fix a bug with csum offload. Signed-off-by: Justin Chen <justin.chen@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250422233645.1931036-8-justin.chen@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-24net: bcmasp: Remove support for asp-v2.0Justin Chen
The SoC that supported asp-v2.0 never saw the light of day. asp-v2.0 has quirks that makes the logic overly complicated. For example, asp-v2.0 is the only revision that has a different wake up IRQ hook up. Remove asp-v2.0 support to make supporting future HW revisions cleaner. Signed-off-by: Justin Chen <justin.chen@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20250422233645.1931036-4-justin.chen@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-23bnxt_en: hide CONFIG_DETECT_HUNG_TASK specific codeArnd Bergmann
The CONFIG_DEFAULT_HUNG_TASK_TIMEOUT setting is only available when the hung task detection is enabled, otherwise the code now produces a build failure: drivers/net/ethernet/broadcom/bnxt/bnxt.c:10188:21: error: use of undeclared identifier 'CONFIG_DEFAULT_HUNG_TASK_TIMEOUT' 10188 | max_tmo_secs > CONFIG_DEFAULT_HUNG_TASK_TIMEOUT) { Enclose this warning logic in an #ifdef to ensure this builds. Fixes: 0fcad44a86bd ("bnxt_en: Change FW message timeout warning") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250423162827.2189658-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-23PCI: Add CONFIG_MMU dependencyArnd Bergmann
It turns out that there are no platforms that have PCI but don't have an MMU, so adding a Kconfig dependency on CONFIG_PCI simplifies build testing kernels for those platforms a lot, and avoids a lot of inadvertent build regressions. Add a dependency for CONFIG_PCI and remove all the ones for PCI specific device drivers that are currently marked not having it. There are a few platforms that have an optional MMU, but they usually cannot have PCI at all. The one exception is Coldfire MCF54xx, but this is mainly for historic reasons, and anyone using those chips should really use the MMU these days. Link: https://lore.kernel.org/lkml/a41f1b20-a76c-43d8-8c36-f12744327a54@app.fastmail.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patch.msgid.link/20250423202215.3315550-1-arnd@kernel.org
2025-04-21bnxt_en: Remove unused macros in bnxt_ulp.hKalesh AP
BNXT_ROCE_ULP and BNXT_MAX_ULP are no longer used. Remove them to clean up the code. Reviewed-by: Shruti Parab <shruti.parab@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250417172448.1206107-5-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-21bnxt_en: Remove unused field "ref_count" in struct bnxt_ulpKalesh AP
The "ref_count" field in struct bnxt_ulp is unused after commit a43c26fa2e6c ("RDMA/bnxt_re: Remove the sriov config callback"). So we can just remove it now. Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250417172448.1206107-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-21bnxt_en: Report the ethtool coredump length after copying the coredumpShruti Parab
ethtool first calls .get_dump_flags() to get the dump length. For coredump, the driver calls the FW to get the coredump length (L1). The min. of L1 and the user specified length is then passed to .get_dump_data() (L2) to get the coredump. The actual coredump length retrieved by the FW (L3) during .get_dump_data() may be smaller than L1. This length discrepancy will trigger a WARN_ON() in ethtool_get_dump_data(). ethtool has already vzalloc'ed a buffer with size L1. Just report the coredump length as L2 even though the actual coredump length L3 may be smaller. The extra zero padding does not matter. This will prevent the warning that may alarm the user. For correctness, only do the final length update if there is no error. Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Signed-off-by: Shruti Parab <shruti.parab@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250417172448.1206107-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-21bnxt_en: Change FW message timeout warningMichael Chan
The firmware advertises a "hwrm_cmd_max_timeout" value to the driver for NVRAM and coredump related functions that can take tens of seconds to complete. The driver polls for the operation to complete under mutex and may trigger hung task watchdog warning if the wait is too long. To warn the user about this, the driver currently prints a warning if this advertised value exceeds 40 seconds: Device requests max timeout of %d seconds, may trigger hung task watchdog Initially, we chose 40 seconds, well below the kernel's default CONFIG_DEFAULT_HUNG_TASK_TIMEOUT (120 seconds) to avoid triggering the hung task watchdog. But 60 seconds is the timeout on most production FW and cannot be reduced further. Change the driver's warning threshold to 60 seconds to avoid triggering this warning on all production devices. We also print the warning if the value exceeds CONFIG_DEFAULT_HUNG_TASK_TIMEOUT which may be set to architecture specific defaults as low as 10 seconds. Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250417172448.1206107-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.15-rc3). No conflicts. Adjacent changes: tools/net/ynl/pyynl/ynl_gen_c.py 4d07bbf2d456 ("tools: ynl-gen: don't declare loop iterator in place") 7e8ba0c7de2b ("tools: ynl: don't use genlmsghdr in classic netlink") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-16eth: bnxt: add support rx side device memory TCPTaehee Yoo
Currently, bnxt_en driver satisfies the requirements of the Device memory TCP, which is HDS. So, it implements rx-side Device memory TCP for bnxt_en driver. It requires only converting the page API to netmem API. `struct page` of agg rings are changed to `netmem_ref netmem` and corresponding functions are changed to a variant of netmem API. It also passes PP_FLAG_ALLOW_UNREADABLE_NETMEM flag to a parameter of page_pool. The netmem will be activated only when a user requests devmem TCP. When netmem is activated, received data is unreadable and netmem is disabled, received data is readable. But drivers don't need to handle both cases because netmem core API will handle it properly. So, using proper netmem API is enough for drivers. Device memory TCP can be tested with tools/testing/selftests/drivers/net/hw/ncdevmem. This is tested with BCM57504-N425G and firmware version 232.0.155.8/pkg 232.1.132.8. Reviewed-by: Mina Almasry <almasrymina@google.com> Tested-by: David Wei <dw@davidwei.uk> Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://patch.msgid.link/20250415052458.1260575-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-15eth: bnxt: fix missing ring index trim on error pathJakub Kicinski
Commit under Fixes converted tx_prod to be free running but missed masking it on the Tx error path. This crashes on error conditions, for example when DMA mapping fails. Fixes: 6d1add95536b ("bnxt_en: Modify TX ring indexing logic.") Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20250414143210.458625-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-08Merge tag 'crc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux Pull CRC cleanups from Eric Biggers: "Finish cleaning up the CRC kconfig options by removing the remaining unnecessary prompts and an unnecessary 'default y', removing CONFIG_LIBCRC32C, and documenting all the CRC library options" * tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: lib/crc: remove CONFIG_LIBCRC32C lib/crc: document all the CRC library kconfig options lib/crc: remove unnecessary prompt for CONFIG_CRC_ITU_T lib/crc: remove unnecessary prompt for CONFIG_CRC_T10DIF lib/crc: remove unnecessary prompt for CONFIG_CRC16 lib/crc: remove unnecessary prompt for CONFIG_CRC_CCITT lib/crc: remove unnecessary prompt for CONFIG_CRC32 and drop 'default y'
2025-04-05treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-04-04lib/crc: remove CONFIG_LIBCRC32CEric Biggers
Now that LIBCRC32C does nothing besides select CRC32, make every option that selects LIBCRC32C instead select CRC32 directly. Then remove LIBCRC32C. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20250401221600.24878-8-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com>
2025-04-03eth: bnxt: fix deadlock in the mgmt_opsTaehee Yoo
When queue is being reset, callbacks of mgmt_ops are called by netdev_nl_bind_rx_doit(). The netdev_nl_bind_rx_doit() first acquires netdev_lock() and then calls callbacks. So, mgmt_ops callbacks should not acquire netdev_lock() internaly. The bnxt_queue_{start | stop}() calls napi_{enable | disable}() but they internally acquire netdev_lock(). So, deadlock occurs. To avoid deadlock, napi_{enable | disable}_locked() should be used instead. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Fixes: cae03e5bdd9e ("net: hold netdev instance lock during queue operations") Link: https://patch.msgid.link/20250402133123.840173-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-31bnxt_en: bring back rtnl lock in bnxt_shutdownStanislav Fomichev
Taehee reports missing rtnl from bnxt_shutdown path: inetdev_event (./include/linux/inetdevice.h:256 net/ipv4/devinet.c:1585) notifier_call_chain (kernel/notifier.c:85) __dev_close_many (net/core/dev.c:1732 (discriminator 3)) kernel/locking/mutex.c:713 kernel/locking/mutex.c:732) dev_close_many (net/core/dev.c:1786) netif_close (./include/linux/list.h:124 ./include/linux/list.h:215 bnxt_shutdown (drivers/net/ethernet/broadcom/bnxt/bnxt.c:16707) bnxt_en pci_device_shutdown (drivers/pci/pci-driver.c:511) device_shutdown (drivers/base/core.c:4820) kernel_restart (kernel/reboot.c:271 kernel/reboot.c:285) Bring back the rtnl lock. Link: https://lore.kernel.org/netdev/CAMArcTV4P8PFsc6O2tSgzRno050DzafgqkLA2b7t=Fv_SY=brw@mail.gmail.com/ Fixes: 004b5008016a ("eth: bnxt: remove most dependencies on RTNL") Reported-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Tested-by: Taehee Yoo <ap420073@gmail.com> Tested-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20250328174216.3513079-1-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-26Merge tag 'net-next-6.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Continue Netlink conversions to per-namespace RTNL lock (IPv4 routing, routing rules, routing next hops, ARP ioctls) - Continue extending the use of netdev instance locks. As a driver opt-in protect queue operations and (in due course) ethtool operations with the instance lock and not RTNL lock. - Support collecting TCP timestamps (data submitted, sent, acked) in BPF, allowing for transparent (to the application) and lower overhead tracking of TCP RPC performance. - Tweak existing networking Rx zero-copy infra to support zero-copy Rx via io_uring. - Optimize MPTCP performance in single subflow mode by 29%. - Enable GRO on packets which went thru XDP CPU redirect (were queued for processing on a different CPU). Improving TCP stream performance up to 2x. - Improve performance of contended connect() by 200% by searching for an available 4-tuple under RCU rather than a spin lock. Bring an additional 229% improvement by tweaking hash distribution. - Avoid unconditionally touching sk_tsflags on RX, improving performance under UDP flood by as much as 10%. - Avoid skb_clone() dance in ping_rcv() to improve performance under ping flood. - Avoid FIB lookup in netfilter if socket is available, 20% perf win. - Rework network device creation (in-kernel) API to more clearly identify network namespaces and their roles. There are up to 4 namespace roles but we used to have just 2 netns pointer arguments, interpreted differently based on context. - Use sysfs_break_active_protection() instead of trylock to avoid deadlocks between unregistering objects and sysfs access. - Add a new sysctl and sockopt for capping max retransmit timeout in TCP. - Support masking port and DSCP in routing rule matches. - Support dumping IPv4 multicast addresses with RTM_GETMULTICAST. - Support specifying at what time packet should be sent on AF_XDP sockets. - Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin users. - Add Netlink YAML spec for WiFi (nl80211) and conntrack. - Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols which only need to be exported when IPv6 support is built as a module. - Age FDB entries based on Rx not Tx traffic in VxLAN, similar to normal bridging. - Allow users to specify source port range for GENEVE tunnels. - netconsole: allow attaching kernel release, CPU ID and task name to messages as metadata Driver API: - Continue rework / fixing of Energy Efficient Ethernet (EEE) across the SW layers. Delegate the responsibilities to phylink where possible. Improve its handling in phylib. - Support symmetric OR-XOR RSS hashing algorithm. - Support tracking and preserving IRQ affinity by NAPI itself. - Support loopback mode speed selection for interface selftests. Device drivers: - Remove the IBM LCS driver for s390 - Remove the sb1000 cable modem driver - Add support for SFP module access over SMBus - Add MCTP transport driver for MCTP-over-USB - Enable XDP metadata support in multiple drivers - Ethernet high-speed NICs: - Broadcom (bnxt): - add PCIe TLP Processing Hints (TPH) support for new AMD platforms - support dumping RoCE queue state for debug - opt into instance locking - Intel (100G, ice, idpf): - ice: rework MSI-X IRQ management and distribution - ice: support for E830 devices - iavf: add support for Rx timestamping - iavf: opt into instance locking - nVidia/Mellanox: - mlx4: use page pool memory allocator for Rx - mlx5: support for one PTP device per hardware clock - mlx5: support for 200Gbps per-lane link modes - mlx5: move IPSec policy check after decryption - AMD/Solarflare: - support FW flashing via devlink - Cisco (enic): - use page pool memory allocator for Rx - enable 32, 64 byte CQEs - get max rx/tx ring size from the device - Meta (fbnic): - support flow steering and RSS configuration - report queue stats - support TCP segmentation - support IRQ coalescing - support ring size configuration - Marvell/Cavium: - support AF_XDP - Wangxun: - support for PTP clock and timestamping - Huawei (hibmcge): - checksum offload - add more statistics - Ethernet virtual: - VirtIO net: - aggressively suppress Tx completions, improve perf by 96% with 1 CPU and 55% with 2 CPUs - expose NAPI to IRQ mapping and persist NAPI settings - Google (gve): - support XDP in DQO RDA Queue Format - opt into instance locking - Microsoft vNIC: - support BIG TCP - Ethernet NICs consumer, and embedded: - Synopsys (stmmac): - cleanup Tx and Tx clock setting and other link-focused cleanups - enable SGMII and 2500BASEX mode switching for Intel platforms - support Sophgo SG2044 - Broadcom switches (b53): - support for BCM53101 - TI: - iep: add perout configuration support - icssg: support XDP - Cadence (macb): - implement BQL - Xilinx (axinet): - support dynamic IRQ moderation and changing coalescing at runtime - implement BQL - report standard stats - MediaTek: - support phylink managed EEE - Intel: - igc: don't restart the interface on every XDP program change - RealTek (r8169): - support reading registers of internal PHYs directly - increase max jumbo packet size on RTL8125/RTL8126 - Airoha: - support for RISC-V NPU packet processing unit - enable scatter-gather and support MTU up to 9kB - Tehuti (tn40xx): - support cards with TN4010 MAC and an Aquantia AQR105 PHY - Ethernet PHYs: - support for TJA1102S, TJA1121 - dp83tg720: add randomized polling intervals for link detection - dp83822: support changing the transmit amplitude voltage - support for LEDs on 88q2xxx - CAN: - canxl: support Remote Request Substitution bit access - flexcan: add S32G2/S32G3 SoC - WiFi: - remove cooked monitor support - strict mode for better AP testing - basic EPCS support - OMI RX bandwidth reduction support - batman-adv: add support for jumbo frames - WiFi drivers: - RealTek (rtw88): - support RTL8814AE and RTL8814AU - RealTek (rtw89): - switch using wiphy_lock and wiphy_work - add BB context to manipulate two PHY as preparation of MLO - improve BT-coexistence mechanism to play A2DP smoothly - Intel (iwlwifi): - add new iwlmld sub-driver for latest HW/FW combinations - MediaTek (mt76): - preparation for mt7996 Multi-Link Operation (MLO) support - Qualcomm/Atheros (ath12k): - continued work on MLO - Silabs (wfx): - Wake-on-WLAN support - Bluetooth: - add support for skb TX SND/COMPLETION timestamping - hci_core: enable buffer flow control for SCO/eSCO - coredump: log devcd dumps into the monitor - Bluetooth drivers: - intel: add support to configure TX power - nxp: handle bootloader error during cmd5 and cmd7" * tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits) unix: fix up for "apparmor: add fine grained af_unix mediation" mctp: Fix incorrect tx flow invalidation condition in mctp-i2c net: usb: asix: ax88772: Increase phy_name size net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string net: libwx: fix Tx L4 checksum net: libwx: fix Tx descriptor content for some tunnel packets atm: Fix NULL pointer dereference net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus net: phy: aquantia: add essential functions to aqr105 driver net: phy: aquantia: search for firmware-name in fwnode net: phy: aquantia: add probe function to aqr105 for firmware loading net: phy: Add swnode support to mdiobus_scan gve: add XDP DROP and PASS support for DQ gve: update XDP allocation path support RX buffer posting gve: merge packet buffer size fields gve: update GQ RX to use buf_size gve: introduce config-based allocation for XDP gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics ...
2025-03-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Merge in late fixes to prepare for the 6.15 net-next PR. No conflicts, adjacent changes: drivers/net/ethernet/broadcom/bnxt/bnxt.c 919f9f497dbc ("eth: bnxt: fix out-of-range access of vnic_info array") fe96d717d38e ("bnxt_en: Extend queue stop/start for TX rings") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-21 04:16:02 +0000