summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/cadence/macb_main.c
AgeCommit message (Collapse)Author
2018-03-30net: macb: Try to retrieve MAC addess from nvmem providerMike Looijmans
Call of_get_nvmem_mac_address() to fetch the MAC address from an nvmem cell, if one is provided in the device tree. This allows the address to be stored in an I2C EEPROM device for example. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16net: macb: Add phy-handle DT supportBrad Mouring
This optional binding (as described in the ethernet DT bindings doc) directs the netdev to the phydev to use. This is useful for a phy chip that has >1 phy in it, and two netdevs are using the same phy chip (i.e. the second mac's phy lives on the first mac's MDIO bus) The devicetree snippet would look something like this: ethernet@feedf00d { ... phy-handle = <&phy0> // the first netdev is physically wired to phy0 ... phy0: phy@0 { ... reg = <0x0> // MDIO address 0 ... } phy1: phy@1 { ... reg = <0x1> // MDIO address 1 ... } ... } ethernet@deadbeef { ... phy-handle = <&phy1> // tells the driver to use phy1 on the // first mac's mdio bus (it's wired thusly) ... } The work done to add the phy_node in the first place (dacdbb4dfc1a1: "net: macb: add fixed-link node support") will consume the device_node (if found). Signed-off-by: Brad Mouring <brad.mouring@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16net: macb: Remove redundant poll irq assignmentBrad Mouring
In phy_device's general probe, this device will already be set for phy register polling, rendering this code redundant. Signed-off-by: Brad Mouring <brad.mouring@ni.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16net: macb: Reorganize macb_mii bringupBrad Mouring
The macb mii setup (mii_probe() and mii_init()) previously was somewhat interspersed, likely a result of organic growth and hacking. This change moves mii bus registration into mii_init and probing the bus for devices into mii_probe. Signed-off-by: Brad Mouring <brad.mouring@ni.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-29net: macb: Handle HRESP errorHarini Katakam
Handle HRESP error by doing a SW reset of RX and TX and re-initializing the descriptors, RX and TX queue pointers. Signed-off-by: Harini Katakam <harinik@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-05net: macb: change GFP_ATOMIC to GFP_KERNELJulia Cartwright
Now that the rx_fs_lock is no longer held across allocation, it's safe to use GFP_KERNEL for allocating new entries. This reverts commit 81da3bf6e3f88 ("net: macb: change GFP_KERNEL to GFP_ATOMIC"). Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Julia Cartwright <julia@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-05net: macb: reduce scope of rx_fs_lock-protected regionsJulia Cartwright
Commit ae8223de3df5 ("net: macb: Added support for RX filtering") introduces a lock, rx_fs_lock which is intended to protect the list of rx_flow items and synchronize access to the hardware rx filtering registers. However, the region protected by this lock is overscoped, unnecessarily including things like slab allocation. Reduce this lock scope to only include operations which must be performed atomically: list traversal, addition, and removal, and hitting the macb filtering registers. This fixes the use of kmalloc w/ GFP_KERNEL in atomic context. Fixes: ae8223de3df5 ("net: macb: Added support for RX filtering") Cc: Rafal Ozieblo <rafalo@cadence.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Julia Cartwright <julia@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-05net: macb: kill useless use of list_empty()Julia Cartwright
The list_for_each_entry() macro already handles the case where the list is empty (by not executing the loop body). It's not necessary to handle this case specially, so stop doing so. Cc: Rafal Ozieblo <rafalo@cadence.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Julia Cartwright <julia@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-05macb: Kill PHY reset codeSergei Shtylyov
With the phylib now being aware of the "reset-gpios" PHY node property, there should be no need to frob the PHY reset in this driver anymore... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-05net: macb: change GFP_KERNEL to GFP_ATOMICJulia Lawall
Function gem_add_flow_filter called on line 2958 inside lock on line 2949 but uses GFP_KERNEL Generated by: scripts/coccinelle/locks/call_kern.cocci Fixes: ae8223de3df5 ("net: macb: Added support for RX filtering") CC: Rafal Ozieblo <rafalo@cadence.com> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-30net: macb: Added support for RX filteringRafal Ozieblo
This patch allows filtering received packets to different hardware queues (aka ntuple). Signed-off-by: Rafal Ozieblo <rafalo@cadence.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-30net: macb: Added some queue statisticsRafal Ozieblo
Added statistics per queue: - qX_rx_packets - qX_rx_bytes - qX_rx_dropped - qX_tx_packets - qX_tx_bytes - qX_tx_dropped Signed-off-by: Rafal Ozieblo <rafalo@cadence.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-30net: macb: Added support for many RX queuesRafal Ozieblo
To be able for packet reception on different RX queues some configuration has to be performed. This patch checks how many hardware queue does GEM support and initializes them. Signed-off-by: Rafal Ozieblo <rafalo@cadence.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11net: macb: add of_node_put to error pathsMichael Grzeschik
We add the call of_node_put(bp->phy_node) to all associated error paths for memory clean up. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11net: macb: add of_phy_deregister_fixed_link to error pathsMichael Grzeschik
We add the call of_phy_deregister_fixed_link to all associated error paths for memory clean up. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01net: macb: remove redundant assignment to variable work_doneColin Ian King
Variable work_done is set to zero and this value is never read, instead it is set to another value a few statements later. Remove the redundant assignment. Cleans up clang warning: drivers/net/ethernet/cadence/macb_main.c:1221:2: warning: Value stored to 'work_done' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Alexander Dahl <ada@thorsis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-17macb: Remove bogus reference to NETIF_F_UFO.David S. Miller
This driver doesn't actually support UFO explicitly yet it advertises this in netdev->features. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-08net: macb: Adding Support for Jumbo Frames up to 10240 Bytes in SAMA5D3vishnuvardhan
As per the SAMA5D3 device specification it supports Jumbo frames. But the suggested flag and length of bytes it supports was not updated in this driver config_structure. The maximum jumbo frames the device supports : 10240 bytes as per the device spec. While changing the MTU value greater than 1500, it threw error: sudo ifconfig eth1 mtu 9000 SIOCSIFMTU: Invalid argument Add this support to driver so that it works as expected and designed. Signed-off-by: vishnuvardhan <vardhanraj4143@gmail.com> [nicolas.ferre@microchip.com: modify slightly commit msg] Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-05net: macb: remove extraneous return when MACB_EXT_DESC is definedColin Ian King
When macro MACB_EXT_DESC is defined we end up with two identical return statements and just one is sufficient. Remove the extra return. Detected by CoverityScan, CID#1449361 ("Structurally dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-30net: macb: Add hardware PTP supportRafal Ozieblo
This patch is based on original Harini's patch and Andrei's patch, implemented in a separate file to ease the review/maintanance and integration with other platforms. This driver supports GEM-GXL: - Register ptp clock framework - Initialize PTP related registers - HW time stamp on the PTP Ethernet packets are received using the SO_TIMESTAMPING API. Time stamps are obtained from the dma buffer descriptors - add macb_ptp to compilation chain Signed-off-by: Rafal Ozieblo <rafalo@cadence.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-30net: macb: macb.c changed to macb_main.cRafal Ozieblo
In case that macb is compiled as a module, macb.c has been renamed to macb_main.c to avoid naming confusion in Makefile. Signed-off-by: Rafal Ozieblo <rafalo@cadence.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-25 20:36:34 +0000