summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/freescale/dpaa2
AgeCommit message (Collapse)Author
2022-09-28net: drop the weight argument from netif_napi_addJakub Kicinski
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-31net: ethernet: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <geoff@infradead.org> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <thomas.lendacky@amd.com> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <mw@semihalf.com> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <leonro@nvidia.com> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <shayagr@amazon.com> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <khalasa@piap.pl> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-11dpaa2-eth: trace the allocated address instead of page structChen Lin
We should trace the allocated address instead of page struct. Fixes: 27c874867c4e ("dpaa2-eth: Use a single page per Rx buffer") Signed-off-by: Chen Lin <chen.lin5@zte.com.cn> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20220811151651.3327-1-chen45464546@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/ethernet/cadence/macb_main.c 5cebb40bc955 ("net: macb: Fix PTP one step sync support") 138badbc21a0 ("net: macb: use NAPI for TX completion path") https://lore.kernel.org/all/20220523111021.31489367@canb.auug.org.au/ net/smc/af_smc.c 75c1edf23b95 ("net/smc: postpone sk_refcnt increment in connect()") 3aba103006bc ("net/smc: align the connect behaviour with TCP") https://lore.kernel.org/all/20220524114408.4bf1af38@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-22dpaa2-eth: unmap the SGT buffer before accessing its contentsIoana Ciornei
DMA unmap the Scatter/Gather table before going through the array to unmap and free each of the header and data chunks. This is so we do not touch the data between the dma_map and dma_unmap calls. Fixes: 3dc709e0cd47 ("dpaa2-eth: add support for software TSO") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-22dpaa2-eth: use the correct software annotation fieldIoana Ciornei
The incorrect software annotation field was being used, swa->sg.sgt_size instead of swa->tso.sgt_size, which meant that the SGT buffer was unmapped with a wrong size. This is also confirmed by the DMA API debug prints which showed the following: [ 38.962434] DMA-API: fsl_dpaa2_eth dpni.2: device driver frees DMA memory with different size [device address=0x0000fffffafba740] [map size=224 bytes] [unmap size=0 bytes] [ 38.980496] WARNING: CPU: 11 PID: 1131 at kernel/dma/debug.c:973 check_unmap+0x58c/0x9b0 [ 38.988586] Modules linked in: [ 38.991631] CPU: 11 PID: 1131 Comm: iperf3 Not tainted 5.18.0-rc7-00117-g59130eeb2b8f #1972 [ 38.999970] Hardware name: NXP Layerscape LX2160ARDB (DT) Fixes: 3dc709e0cd47 ("dpaa2-eth: add support for software TSO") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-22dpaa2-eth: retrieve the virtual address before dma_unmapIoana Ciornei
The TSO header was DMA unmapped before the virtual address was retrieved and then used to free the buffer. This meant that we were actually removing the DMA map and then trying to search for it to help in retrieving the virtual address. This lead to a invalid virtual address being used in the kfree call. Fix this by calling dpaa2_iova_to_virt() prior to the dma_unmap call. [ 487.231819] Unable to handle kernel paging request at virtual address fffffd9807000008 (...) [ 487.354061] Hardware name: SolidRun LX2160A Honeycomb (DT) [ 487.359535] pstate: a0400005 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 487.366485] pc : kfree+0xac/0x304 [ 487.369799] lr : kfree+0x204/0x304 [ 487.373191] sp : ffff80000c4eb120 [ 487.376493] x29: ffff80000c4eb120 x28: ffff662240c46400 x27: 0000000000000001 [ 487.383621] x26: 0000000000000001 x25: ffff662246da0cc0 x24: ffff66224af78000 [ 487.390748] x23: ffffad184f4ce008 x22: ffffad1850185000 x21: ffffad1838d13cec [ 487.397874] x20: ffff6601c0000000 x19: fffffd9807000000 x18: 0000000000000000 [ 487.405000] x17: ffffb910cdc49000 x16: ffffad184d7d9080 x15: 0000000000004000 [ 487.412126] x14: 0000000000000008 x13: 000000000000ffff x12: 0000000000000000 [ 487.419252] x11: 0000000000000004 x10: 0000000000000001 x9 : ffffad184d7d927c [ 487.426379] x8 : 0000000000000000 x7 : 0000000ffffffd1d x6 : ffff662240a94900 [ 487.433505] x5 : 0000000000000003 x4 : 0000000000000009 x3 : ffffad184f4ce008 [ 487.440632] x2 : ffff662243eec000 x1 : 0000000100000100 x0 : fffffc0000000000 [ 487.447758] Call trace: [ 487.450194] kfree+0xac/0x304 [ 487.453151] dpaa2_eth_free_tx_fd.isra.0+0x33c/0x3e0 [fsl_dpaa2_eth] [ 487.459507] dpaa2_eth_tx_conf+0x100/0x2e0 [fsl_dpaa2_eth] [ 487.464989] dpaa2_eth_poll+0xdc/0x380 [fsl_dpaa2_eth] Fixes: 3dc709e0cd47 ("dpaa2-eth: add support for software TSO") Link: https://bugzilla.kernel.org/show_bug.cgi?id=215886 Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-10eth: dpaa2-mac: remove a dead-code NULL check on fwnode parentJakub Kicinski
Since commit 4e30e98c4b4c ("dpaa2-mac: return -EPROBE_DEFER from dpaa2_mac_open in case the fwnode is not set") @parent can't be NULL after the if. It's either the address of the ->fwnode of @dpmacs or @fwnode in case of ACPI. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20220506200029.852310-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-05dpaa2-ptp: Fix refcount leak in dpaa2_ptp_probeMiaoqian Lin
This node pointer is returned by of_find_compatible_node() with refcount incremented. Calling of_node_put() to aovid the refcount leak. Fixes: d346c9e86d86 ("dpaa2-ptp: reuse ptp_qoriq driver") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220404125336.13427-1-linmq006@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-14dpaa2-mac: configure the SerDes phy on a protocol changeIoana Ciornei
This patch integrates the dpaa2-eth driver with the generic PHY infrastructure in order to search, find and reconfigure the SerDes lanes in case of a protocol change. On the .mac_config() callback, the phy_set_mode_ext() API is called so that the Lynx 28G SerDes PHY driver can change the lane's configuration. In the same phylink callback the MC firmware is called so that it reconfigures the MAC side to run using the new protocol. The consumer drivers - dpaa2-eth and dpaa2-switch - are updated to call the dpaa2_mac_start/stop functions newly added which will power_on/power_off the associated SerDes lane. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-14dpaa2-mac: move setting up supported_interfaces into a functionIoana Ciornei
The logic to setup the supported interfaces will get annotated based on what the configuration of the SerDes PLLs supports. Move the current setup into a separate function just to try to keep it clean. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-14dpaa2-mac: retrieve API version and detect featuresIoana Ciornei
Retrieve the API version running on the firmware and based on it detect which features are available for usage. The first one to be listed is the capability to change the MAC protocol at runtime. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-14dpaa2-mac: add the MC API for reconfiguring the protocolIoana Ciornei
The MC firmware gained recently a new command which can reconfigure the running protocol on the underlying MAC. Add this new command which will be used in the next patches in order to do a major reconfig on the interface. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-14dpaa2-mac: add the MC API for retrieving the versionIoana Ciornei
The dpmac_get_api_version command will be used in the next patches to determine if the current firmware is capable or not to change the Ethernet protocol running on the MAC. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-19dpaa2-eth: Update SINGLE_STEP register accessRadu Bulie
DPAA2 MAC supports 1588 one step timestamping. If this option is enabled then for each transmitted PTP event packet, the 1588 SINGLE_STEP register is accessed to modify the following fields: -offset of the correction field inside the PTP packet -UDP checksum update bit, in case the PTP event packet has UDP encapsulation These values can change any time, because there may be multiple PTP clients connected, that receive various 1588 frame types: - L2 only frame - UDP / Ipv4 - UDP / Ipv6 - other The current implementation uses dpni_set_single_step_cfg to update the SINLGE_STEP register. Using an MC command on the Tx datapath for each transmitted 1588 message introduces high delays, leading to low throughput and consequently to a small number of supported PTP clients. Besides these, the nanosecond correction field from the PTP packet will contain the high delay from the driver which together with the originTimestamp will render timestamp values that are unacceptable in a GM clock implementation. This patch updates the Tx datapath for 1588 messages when single step timestamp is enabled and provides direct access to SINGLE_STEP register, eliminating the overhead caused by the dpni_set_single_step_cfg MC command. MC version >= 10.32 implements this functionality. If the MC version does not have support for returning the single step register base address, the driver will use dpni_set_single_step_cfg command for updates operations. All the delay introduced by dpni_set_single_step_cfg function will be eliminated (if MC version has support for returning the base address of the single step register), improving the egress driver performance for PTP packets when single step timestamping is enabled. Before these changes the maximum throughput for 1588 messages with single step hardware timestamp enabled was around 2000pps. After the updates the throughput increased up to 32.82 Mbps / 46631.02 pps. Signed-off-by: Radu Bulie <radu-andrei.bulie@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-19dpaa2-eth: Update dpni_get_single_step_cfg commandRadu Bulie
dpni_get_single_step_cfg is an MC firmware command used for retrieving the contents of SINGLE_STEP 1588 register available in a DPMAC. This patch adds a new version of this command that returns as an extra argument the physical base address of the aforementioned register. The address will be used to directly modify the contents of the SINGLE_STEP register instead of invoking the MC command dpni_set_single_step_cgf. The former approach introduced huge delays on the TX datapath when one step PTP events were transmitted. This led to low throughput and high latencies observed in the PTP correction field. Signed-off-by: Radu Bulie <radu-andrei.bulie@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-15dpaa2-eth: Simplify bool conversionYang Li
Fix the following coccicheck warnings: ./drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c:1199:42-47: WARNING: conversion to bool not needed here ./drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c:1218:54-59: WARNING: conversion to bool not needed here Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15dpaa2-eth: Initialize mutex used in one step timestamping pathRadu Bulie
1588 Single Step Timestamping code path uses a mutex to enforce atomicity for two events: - update of ptp single step register - transmit ptp event packet Before this patch the mutex was not initialized. This caused unexpected crashes in the Tx function. Fixes: c55211892f463 ("dpaa2-eth: support PTP Sync packet one-step timestamping") Signed-off-by: Radu Bulie <radu-andrei.bulie@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-15dpaa2-switch: fix default return of dpaa2_switch_flower_parse_mirror_keyTom Rix
Clang static analysis reports this representative problem dpaa2-switch-flower.c:616:24: warning: The right operand of '==' is a garbage value tmp->cfg.vlan_id == vlan) { ^ ~~~~ vlan is set in dpaa2_switch_flower_parse_mirror_key(). However this function can return success without setting vlan. So change the default return to -EOPNOTSUPP. Fixes: 0f3faece5808 ("dpaa2-switch: add VLAN based mirroring") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-10dpaa2-eth: unregister the netdev before disconnecting from the PHYRobert-Ionut Alexa
The netdev should be unregistered before we are disconnecting from the MAC/PHY so that the dev_close callback is called and the PHY and the phylink workqueues are actually stopped before we are disconnecting and destroying the phylink instance. Fixes: 719479230893 ("dpaa2-eth: add MAC/PHY support through phylink") Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-09dpaa2-eth: add support for software TSOIoana Ciornei
This patch adds support for driver level TSO in the enetc driver using the TSO API. There is not much to say about this specific implementation. We are using the usual tso_build_hdr(), tso_build_data() to create each data segment, we create an array of S/G FDs where the first S/G entry is referencing the header data and the remaining ones the data portion. For the S/G Table buffer we use the same cache of buffers used on the other non-GSO cases - dpaa2_eth_sgt_get() and dpaa2_eth_sgt_recycle(). We cannot keep a DMA coherent buffer for all the TSO headers because the DPAA2 architecture does not work in a ring based fashion so we just allocate a buffer each time. Even with these limitations we get the following improvement in TCP termination on the LX2160A SoC, on a single A72 core running at 2.2GHz. before: 6.38Gbit/s after: 8.48Gbit/s Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-09dpaa2-eth: work with an array of FDsIoana Ciornei
Up until now, the __dpaa2_eth_tx function used a single FD on the stack to construct the structure to be enqueued. Since we are now preparing the ground work to add support for TSO done in software at the driver level, the same function needs to work with an array of FDs and enqueue as many as the build_*_fd functions create. Make the necessary adjustments in order to do this. These include: keeping an array of FDs in a percpu structure, cleaning up the necessary FDs before populating it and then, retrying the enqueue process up till all the generated FDs were enqueued or until we reach the maximum number retries. This patch does not change the fact that only a single FD will result from a __dpaa2_eth_tx call but rather just creates the necessary changes for the next patch. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-09dpaa2-eth: use the S/G table cache also for the normal S/G pathIoana Ciornei
Instead of allocating memory for an S/G table each time a nonlinear skb is processed, and then freeing it on the Tx confirmation path, use the S/G table cache in order to reuse the memory. For this to work we have to change the size of the cached buffers so that it can hold the maximum number of scatterlist entries. Other than that, each allocate/free call is replaced by a call to the dpaa2_eth_sgt_get/dpaa2_eth_sgt_recycle functions, introduced in the previous patch. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-09dpaa2-eth: extract the S/G table buffer cache interaction into functionsIoana Ciornei
The dpaa2-eth driver uses in certain circumstances a buffer cache for the S/G tables needed in case of a S/G FD. At the moment, the interraction with the cache is open-coded and couldn't be reused easily. Add two new functions - dpaa2_eth_sgt_get and dpaa2_eth_sgt_recycle - which help with code reusability. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-09dpaa2-eth: allocate a fragment already alignedIoana Ciornei
Instead of allocating memory and then manually aligning it to the desired value use napi_alloc_frag_align() directly to streamline the process. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-09dpaa2-eth: rearrange variable declaration in __dpaa2_eth_txIoana Ciornei
In the next patches we'll be moving things arroung in the mentioned function and also add some new variable declarations. Before all this, cleanup the variable declaration order. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-26net: dpaa2-mac: use .mac_select_pcs() interfaceRussell King (Oracle)
Convert dpaa2-mac to use the mac_select_pcs() interface rather than using phylink_set_pcs(). The intention here is to unify the approach for PCS and eventually to remove phylink_set_pcs(). Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-13Merge tag 'irq-msi-2022-01-13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull MSI irq updates from Thomas Gleixner: "Rework of the MSI interrupt infrastructure. This is a treewide cleanup and consolidation of MSI interrupt handling in preparation for further changes in this area which are necessary to: - address existing shortcomings in the VFIO area - support the upcoming Interrupt Message Store functionality which decouples the message store from the PCI config/MMIO space" * tag 'irq-msi-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (94 commits) genirq/msi: Populate sysfs entry only once PCI/MSI: Unbreak pci_irq_get_affinity() genirq/msi: Convert storage to xarray genirq/msi: Simplify sysfs handling genirq/msi: Add abuse prevention comment to msi header genirq/msi: Mop up old interfaces genirq/msi: Convert to new functions genirq/msi: Make interrupt allocation less convoluted platform-msi: Simplify platform device MSI code platform-msi: Let core code handle MSI descriptors bus: fsl-mc-msi: Simplify MSI descriptor handling soc: ti: ti_sci_inta_msi: Remove ti_sci_inta_msi_domain_free_irqs() soc: ti: ti_sci_inta_msi: Rework MSI descriptor allocation NTB/msi: Convert to msi_on_each_desc() PCI: hv: Rework MSI handling powerpc/mpic_u3msi: Use msi_for_each-desc() powerpc/fsl_msi: Use msi_for_each_desc() powerpc/pasemi/msi: Convert to msi_on_each_dec() powerpc/cell/axon_msi: Convert to msi_on_each_desc() powerpc/4xx/hsta: Rework MSI handling ...
2022-01-06dpaa2-switch: check if the port priv is validIoana Ciornei
Before accessing the port private structure make sure that there is still a non-NULL pointer there. A NULL pointer access can happen when we are on the remove path, some switch ports are unregistered and some are in the process of unregistering. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-06dpaa2-mac: return -EPROBE_DEFER from dpaa2_mac_open in case the fwnode is ↵Ioana Ciornei
not set We could get into a situation when the fwnode of the parent device is not yet set because its probe didn't yet finish. When this happens, any caller of the dpaa2_mac_open() will not have the fwnode available, thus cause problems at the PHY connect time. Avoid this by just returning -EPROBE_DEFER from the dpaa2_mac_open when this happens. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-06dpaa2-mac: bail if the dpmacs fwnode is not foundRobert-Ionut Alexa
The parent pointer node handler must be declared with a NULL initializer. Before using it, a check must be performed to make sure that a valid address has been assigned to it. Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-02net: phy: lynx: refactor Lynx PCS module to use generic phylink_pcsColin Foster
Remove references to lynx_pcs structures so drivers like the Felix DSA can reference alternate PCS drivers. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-12-30 The following pull-request contains BPF updates for your *net-next* tree. We've added 72 non-merge commits during the last 20 day(s) which contain a total of 223 files changed, 3510 insertions(+), 1591 deletions(-). The main changes are: 1) Automatic setrlimit in libbpf when bpf is memcg's in the kernel, from Andrii. 2) Beautify and de-verbose verifier logs, from Christy. 3) Composable verifier types, from Hao. 4) bpf_strncmp helper, from Hou. 5) bpf.h header dependency cleanup, from Jakub. 6) get_func_[arg|ret|arg_cnt] helpers, from Jiri. 7) Sleepable local storage, from KP. 8) Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support, from Kumar. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-16bus: fsl-mc: fsl-mc-allocator: Rework MSI handlingThomas Gleixner
Storing a pointer to the MSI descriptor just to track the Linux interrupt number is daft. Just store the interrupt number and be done with it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20211210221815.207838579@linutronix.de
2021-12-15dpaa2-eth: fix ethtool statisticsIoana Ciornei
Unfortunately, with the blamed commit I also added a side effect in the ethtool stats shown. Because I added two more fields in the per channel structure without verifying if its size is used in any way, part of the ethtool statistics were off by 2. Fix this by not looking up the size of the structure but instead on a fixed value kept in a macro. Fixes: fc398bec0387 ("net: dpaa2: add adaptive interrupt coalescing") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20211215105831.290070-1-ioana.ciornei@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-13bpf: Let bpf_warn_invalid_xdp_action() report more infoPaolo Abeni
In non trivial scenarios, the action id alone is not sufficient to identify the program causing the warning. Before the previous patch, the generated stack-trace pointed out at least the involved device driver. Let's additionally include the program name and id, and the relevant device name. If the user needs additional infos, he can fetch them via a kernel probe, leveraging the arguments added here. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/ddb96bb975cbfddb1546cf5da60e77d5100b533c.1638189075.git.pabeni@redhat.com
2021-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-30dpaa2-eth: destroy workqueue at the end of remove functionDongliang Mu
The commit c55211892f46 ("dpaa2-eth: support PTP Sync packet one-step timestamping") forgets to destroy workqueue at the end of remove function. Fix this by adding destroy_workqueue before fsl_mc_portal_free and free_netdev. Fixes: c55211892f46 ("dpaa2-eth: support PTP Sync packet one-step timestamping") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-18net: dpaa2-mac: use phylink_generic_validate()Russell King (Oracle)
DPAA2 has no special behaviour in its validation implementation, so can be switched to phylink_generic_validate(). Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-18net: dpaa2-mac: remove interface checks in dpaa2_mac_validate()Russell King (Oracle)
As phylink checks the interface mode against the supported_interfaces bitmap, we no longer need to validate the interface mode, nor handle PHY_INTERFACE_MODE_NA in the validation function. Remove these to simplify the implementation. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-18net: dpaa2-mac: populate supported_interfaces memberRussell King
Populate the phy interface mode bitmap for the Freescale DPAA2 driver with interfaces modes supported by the MAC. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-17net: dpaa2-eth: fix use-after-free in dpaa2_eth_removePavel Skripkin
Access to netdev after free_netdev() will cause use-after-free bug. Move debug log before free_netdev() call to avoid it. Fixes: 7472dd9f6499 ("staging: fsl-dpaa2/eth: Move print message") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-15net: dpaa2: add adaptive interrupt coalescingIoana Ciornei
Add support for adaptive interrupt coalescing to the dpaa2-eth driver. First of all, ETHTOOL_COALESCE_USE_ADAPTIVE_RX is defined as a supported coalesce parameter and the requested state is configured through the dpio APIs added in the previous patch. Besides the ethtool API interaction, we keep track of how many bytes and frames are dequeued per CDAN (Channel Data Availability Notification) and update the Net DIM instance through the dpaa2_io_update_net_dim() API. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-15net: dpaa2: add support for manual setup of IRQ coalesingIoana Ciornei
Use the newly exported dpio driver API to manually configure the IRQ coalescing parameters requested by the user. The .get_coalesce() and .set_coalesce() net_device callbacks are implemented and directly export or setup the rx-usecs on all the channels configured. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-05ethernet: use eth_hw_addr_set() for dev->addr_len casesJakub Kicinski
Convert all Ethernet drivers from memcpy(... dev->addr_len) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, dev->addr_len) + eth_hw_addr_set(dev, np) In theory addr_len may not be ETH_ALEN, but we don't expect non-Ethernet devices to live under this directory, and only the following cases of setting addr_len exist: - cxgb4 for mgmt device, and the drivers which set it to ETH_ALEN: s2io, mlx4, vxge. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-04net: ethernet: use phylink_set_10g_modes()Russell King (Oracle)
Update three drivers to use the new phylink_set_10g_modes() helper: Cadence macb, Freescale DPAA2 and Marvell PP2. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-30 05:48:39 +0000