summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ice
AgeCommit message (Collapse)Author
2022-09-27ice: xsk: drop power of 2 ring size restriction for AF_XDPMaciej Fijalkowski
We had multiple customers in the past months that reported commit 296f13ff3854 ("ice: xsk: Force rings to be sized to power of 2") makes them unable to use ring size of 8160 in conjunction with AF_XDP. Remove this restriction. Fixes: 296f13ff3854 ("ice: xsk: Force rings to be sized to power of 2") CC: Alasdair McWilliam <alasdair.mcwilliam@outlook.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-27ice: xsk: change batched Tx descriptor cleaningMaciej Fijalkowski
AF_XDP Tx descriptor cleaning in ice driver currently works in a "lazy" way - descriptors are not cleaned immediately after send. We rather hold on with cleaning until we see that free space in ring drops below particular threshold. This was supposed to reduce the amount of unnecessary work related to cleaning and instead of keeping the ring empty, ring was rather saturated. In AF_XDP realm cleaning Tx descriptors implies producing them to CQ. This is a way of letting know user space that particular descriptor has been sent, as John points out in [0]. We tried to implement serial descriptor cleaning which would be used in conjunction with batched cleaning but it made code base more convoluted and probably harder to maintain in future. Therefore we step away from batched cleaning in a current form in favor of an approach where we set RS bit on every last descriptor from a batch and clean always at the beginning of ice_xmit_zc(). This means that we give up a bit of Tx performance, but this doesn't hurt l2fwd scenario which is way more meaningful than txonly as this can be treaten as AF_XDP based packet generator. l2fwd is not hurt due to the fact that Tx side is much faster than Rx and Rx is the one that has to catch Tx up. FWIW Tx descriptors are still produced in a batched way. [0]: https://lore.kernel.org/bpf/62b0a20232920_3573208ab@john.notmuch/ Fixes: 126cdfe1007a ("ice: xsk: Improve AF_XDP ZC Tx and use batching API") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-21Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-09-20 (ice) Michal re-sets TC configuration when changing number of queues. Mateusz moves the check and call for link-down-on-close to the specific path for downing/closing the interface. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix interface being down after reset with link-down-on-close flag on ice: config netdev tc before setting queues number ==================== Link: https://lore.kernel.org/r/20220920205344.1860934-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-21ice: Fix ice_xdp_xmit() when XDP TX queue number is not sufficientLarysa Zaremba
The original patch added the static branch to handle the situation, when assigning an XDP TX queue to every CPU is not possible, so they have to be shared. However, in the XDP transmit handler ice_xdp_xmit(), an error was returned in such cases even before static condition was checked, thus making queue sharing still impossible. Fixes: 22bf877e528f ("ice: introduce XDP_TX fallback path") Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Link: https://lore.kernel.org/r/20220919134346.25030-1-larysa.zaremba@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-20ice: Fix interface being down after reset with link-down-on-close flag onMateusz Palczewski
When performing a reset on ice driver with link-down-on-close flag on interface would always stay down. Fix this by moving a check of this flag to ice_stop() that is called only when user wants to bring interface down. Fixes: ab4ab73fc1ec ("ice: Add ethtool private flag to make forcing link down optional") Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Petr Oros <poros@redhat.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-20ice: config netdev tc before setting queues numberMichal Swiatkowski
After lowering number of tx queues the warning appears: "Number of in use tx queues changed invalidating tc mappings. Priority traffic classification disabled!" Example command to reproduce: ethtool -L enp24s0f0 tx 36 rx 36 Fix this by setting correct tc mapping before setting real number of queues on netdev. Fixes: 0754d65bd4be5 ("ice: Add infrastructure for mqprio support via ndo_setup_tc") Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-08ice: Fix crash by keep old cfg when update TCs more than queuesDing Hui
There are problems if allocated queues less than Traffic Classes. Commit a632b2a4c920 ("ice: ethtool: Prohibit improper channel config for DCB") already disallow setting less queues than TCs. Another case is if we first set less queues, and later update more TCs config due to LLDP, ice_vsi_cfg_tc() will failed but left dirty num_txq/rxq and tc_cfg in vsi, that will cause invalid pointer access. [ 95.968089] ice 0000:3b:00.1: More TCs defined than queues/rings allocated. [ 95.968092] ice 0000:3b:00.1: Trying to use more Rx queues (8), than were allocated (1)! [ 95.968093] ice 0000:3b:00.1: Failed to config TC for VSI index: 0 [ 95.969621] general protection fault: 0000 [#1] SMP NOPTI [ 95.969705] CPU: 1 PID: 58405 Comm: lldpad Kdump: loaded Tainted: G U W O --------- -t - 4.18.0 #1 [ 95.969867] Hardware name: O.E.M/BC11SPSCB10, BIOS 8.23 12/30/2021 [ 95.969992] RIP: 0010:devm_kmalloc+0xa/0x60 [ 95.970052] Code: 5c ff ff ff 31 c0 5b 5d 41 5c c3 b8 f4 ff ff ff eb f4 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 89 d1 <8b> 97 60 02 00 00 48 8d 7e 18 48 39 f7 72 3f 55 89 ce 53 48 8b 4c [ 95.970344] RSP: 0018:ffffc9003f553888 EFLAGS: 00010206 [ 95.970425] RAX: dead000000000200 RBX: ffffea003c425b00 RCX: 00000000006080c0 [ 95.970536] RDX: 00000000006080c0 RSI: 0000000000000200 RDI: dead000000000200 [ 95.970648] RBP: dead000000000200 R08: 00000000000463c0 R09: ffff888ffa900000 [ 95.970760] R10: 0000000000000000 R11: 0000000000000002 R12: ffff888ff6b40100 [ 95.970870] R13: ffff888ff6a55018 R14: 0000000000000000 R15: ffff888ff6a55460 [ 95.970981] FS: 00007f51b7d24700(0000) GS:ffff88903ee80000(0000) knlGS:0000000000000000 [ 95.971108] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 95.971197] CR2: 00007fac5410d710 CR3: 0000000f2c1de002 CR4: 00000000007606e0 [ 95.971309] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 95.971419] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 95.971530] PKRU: 55555554 [ 95.971573] Call Trace: [ 95.971622] ice_setup_rx_ring+0x39/0x110 [ice] [ 95.971695] ice_vsi_setup_rx_rings+0x54/0x90 [ice] [ 95.971774] ice_vsi_open+0x25/0x120 [ice] [ 95.971843] ice_open_internal+0xb8/0x1f0 [ice] [ 95.971919] ice_ena_vsi+0x4f/0xd0 [ice] [ 95.971987] ice_dcb_ena_dis_vsi.constprop.5+0x29/0x90 [ice] [ 95.972082] ice_pf_dcb_cfg+0x29a/0x380 [ice] [ 95.972154] ice_dcbnl_setets+0x174/0x1b0 [ice] [ 95.972220] dcbnl_ieee_set+0x89/0x230 [ 95.972279] ? dcbnl_ieee_del+0x150/0x150 [ 95.972341] dcb_doit+0x124/0x1b0 [ 95.972392] rtnetlink_rcv_msg+0x243/0x2f0 [ 95.972457] ? dcb_doit+0x14d/0x1b0 [ 95.972510] ? __kmalloc_node_track_caller+0x1d3/0x280 [ 95.972591] ? rtnl_calcit.isra.31+0x100/0x100 [ 95.972661] netlink_rcv_skb+0xcf/0xf0 [ 95.972720] netlink_unicast+0x16d/0x220 [ 95.972781] netlink_sendmsg+0x2ba/0x3a0 [ 95.975891] sock_sendmsg+0x4c/0x50 [ 95.979032] ___sys_sendmsg+0x2e4/0x300 [ 95.982147] ? kmem_cache_alloc+0x13e/0x190 [ 95.985242] ? __wake_up_common_lock+0x79/0x90 [ 95.988338] ? __check_object_size+0xac/0x1b0 [ 95.991440] ? _copy_to_user+0x22/0x30 [ 95.994539] ? move_addr_to_user+0xbb/0xd0 [ 95.997619] ? __sys_sendmsg+0x53/0x80 [ 96.000664] __sys_sendmsg+0x53/0x80 [ 96.003747] do_syscall_64+0x5b/0x1d0 [ 96.006862] entry_SYSCALL_64_after_hwframe+0x65/0xca Only update num_txq/rxq when passed check, and restore tc_cfg if setup queue map failed. Fixes: a632b2a4c920 ("ice: ethtool: Prohibit improper channel config for DCB") Signed-off-by: Ding Hui <dinghui@sangfor.com.cn> Reviewed-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-08ice: Don't double unplug aux on peer initiated resetDave Ertman
In the IDC callback that is accessed when the aux drivers request a reset, the function to unplug the aux devices is called. This function is also called in the ice_prepare_for_reset function. This double call is causing a "scheduling while atomic" BUG. [ 662.676430] ice 0000:4c:00.0 rocep76s0: cqp opcode = 0x1 maj_err_code = 0xffff min_err_code = 0x8003 [ 662.676609] ice 0000:4c:00.0 rocep76s0: [Modify QP Cmd Error][op_code=8] status=-29 waiting=1 completion_err=1 maj=0xffff min=0x8003 [ 662.815006] ice 0000:4c:00.0 rocep76s0: ICE OICR event notification: oicr = 0x10000003 [ 662.815014] ice 0000:4c:00.0 rocep76s0: critical PE Error, GLPE_CRITERR=0x00011424 [ 662.815017] ice 0000:4c:00.0 rocep76s0: Requesting a reset [ 662.815475] BUG: scheduling while atomic: swapper/37/0/0x00010002 [ 662.815475] BUG: scheduling while atomic: swapper/37/0/0x00010002 [ 662.815477] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs rfkill 8021q garp mrp stp llc vfat fat rpcrdma intel_rapl_msr intel_rapl_common sunrpc i10nm_edac rdma_ucm nfit ib_srpt libnvdimm ib_isert iscsi_target_mod x86_pkg_temp_thermal intel_powerclamp coretemp target_core_mod snd_hda_intel ib_iser snd_intel_dspcfg libiscsi snd_intel_sdw_acpi scsi_transport_iscsi kvm_intel iTCO_wdt rdma_cm snd_hda_codec kvm iw_cm ipmi_ssif iTCO_vendor_support snd_hda_core irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hwdep snd_seq snd_seq_device rapl snd_pcm snd_timer isst_if_mbox_pci pcspkr isst_if_mmio irdma intel_uncore idxd acpi_ipmi joydev isst_if_common snd mei_me idxd_bus ipmi_si soundcore i2c_i801 mei ipmi_devintf i2c_smbus i2c_ismt ipmi_msghandler acpi_power_meter acpi_pad rv(OE) ib_uverbs ib_cm ib_core xfs libcrc32c ast i2c_algo_bit drm_vram_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm_ttm_helpe r ttm [ 662.815546] nvme nvme_core ice drm crc32c_intel i40e t10_pi wmi pinctrl_emmitsburg dm_mirror dm_region_hash dm_log dm_mod fuse [ 662.815557] Preemption disabled at: [ 662.815558] [<0000000000000000>] 0x0 [ 662.815563] CPU: 37 PID: 0 Comm: swapper/37 Kdump: loaded Tainted: G S OE 5.17.1 #2 [ 662.815566] Hardware name: Intel Corporation D50DNP/D50DNP, BIOS SE5C6301.86B.6624.D18.2111021741 11/02/2021 [ 662.815568] Call Trace: [ 662.815572] <IRQ> [ 662.815574] dump_stack_lvl+0x33/0x42 [ 662.815581] __schedule_bug.cold.147+0x7d/0x8a [ 662.815588] __schedule+0x798/0x990 [ 662.815595] schedule+0x44/0xc0 [ 662.815597] schedule_preempt_disabled+0x14/0x20 [ 662.815600] __mutex_lock.isra.11+0x46c/0x490 [ 662.815603] ? __ibdev_printk+0x76/0xc0 [ib_core] [ 662.815633] device_del+0x37/0x3d0 [ 662.815639] ice_unplug_aux_dev+0x1a/0x40 [ice] [ 662.815674] ice_schedule_reset+0x3c/0xd0 [ice] [ 662.815693] irdma_iidc_event_handler.cold.7+0xb6/0xd3 [irdma] [ 662.815712] ? bitmap_find_next_zero_area_off+0x45/0xa0 [ 662.815719] ice_send_event_to_aux+0x54/0x70 [ice] [ 662.815741] ice_misc_intr+0x21d/0x2d0 [ice] [ 662.815756] __handle_irq_event_percpu+0x4c/0x180 [ 662.815762] handle_irq_event_percpu+0xf/0x40 [ 662.815764] handle_irq_event+0x34/0x60 [ 662.815766] handle_edge_irq+0x9a/0x1c0 [ 662.815770] __common_interrupt+0x62/0x100 [ 662.815774] common_interrupt+0xb4/0xd0 [ 662.815779] </IRQ> [ 662.815780] <TASK> [ 662.815780] asm_common_interrupt+0x1e/0x40 [ 662.815785] RIP: 0010:cpuidle_enter_state+0xd6/0x380 [ 662.815789] Code: 49 89 c4 0f 1f 44 00 00 31 ff e8 65 d7 95 ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 64 02 00 00 31 ff e8 ae c5 9c ff fb 45 85 f6 <0f> 88 12 01 00 00 49 63 d6 4c 2b 24 24 48 8d 04 52 48 8d 04 82 49 [ 662.815791] RSP: 0018:ff2c2c4f18edbe80 EFLAGS: 00000202 [ 662.815793] RAX: ff280805df140000 RBX: 0000000000000002 RCX: 000000000000001f [ 662.815795] RDX: 0000009a52da2d08 RSI: ffffffff93f8240b RDI: ffffffff93f53ee7 [ 662.815796] RBP: ff5e2bd11ff41928 R08: 0000000000000000 R09: 000000000002f8c0 [ 662.815797] R10: 0000010c3f18e2cf R11: 000000000000000f R12: 0000009a52da2d08 [ 662.815798] R13: ffffffff94ad7e20 R14: 0000000000000002 R15: 0000000000000000 [ 662.815801] cpuidle_enter+0x29/0x40 [ 662.815803] do_idle+0x261/0x2b0 [ 662.815807] cpu_startup_entry+0x19/0x20 [ 662.815809] start_secondary+0x114/0x150 [ 662.815813] secondary_startup_64_no_verify+0xd5/0xdb [ 662.815818] </TASK> [ 662.815846] bad: scheduling from the idle thread! [ 662.815849] CPU: 37 PID: 0 Comm: swapper/37 Kdump: loaded Tainted: G S W OE 5.17.1 #2 [ 662.815852] Hardware name: Intel Corporation D50DNP/D50DNP, BIOS SE5C6301.86B.6624.D18.2111021741 11/02/2021 [ 662.815853] Call Trace: [ 662.815855] <IRQ> [ 662.815856] dump_stack_lvl+0x33/0x42 [ 662.815860] dequeue_task_idle+0x20/0x30 [ 662.815863] __schedule+0x1c3/0x990 [ 662.815868] schedule+0x44/0xc0 [ 662.815871] schedule_preempt_disabled+0x14/0x20 [ 662.815873] __mutex_lock.isra.11+0x3a8/0x490 [ 662.815876] ? __ibdev_printk+0x76/0xc0 [ib_core] [ 662.815904] device_del+0x37/0x3d0 [ 662.815909] ice_unplug_aux_dev+0x1a/0x40 [ice] [ 662.815937] ice_schedule_reset+0x3c/0xd0 [ice] [ 662.815961] irdma_iidc_event_handler.cold.7+0xb6/0xd3 [irdma] [ 662.815979] ? bitmap_find_next_zero_area_off+0x45/0xa0 [ 662.815985] ice_send_event_to_aux+0x54/0x70 [ice] [ 662.816011] ice_misc_intr+0x21d/0x2d0 [ice] [ 662.816033] __handle_irq_event_percpu+0x4c/0x180 [ 662.816037] handle_irq_event_percpu+0xf/0x40 [ 662.816039] handle_irq_event+0x34/0x60 [ 662.816042] handle_edge_irq+0x9a/0x1c0 [ 662.816045] __common_interrupt+0x62/0x100 [ 662.816048] common_interrupt+0xb4/0xd0 [ 662.816052] </IRQ> [ 662.816053] <TASK> [ 662.816054] asm_common_interrupt+0x1e/0x40 [ 662.816057] RIP: 0010:cpuidle_enter_state+0xd6/0x380 [ 662.816060] Code: 49 89 c4 0f 1f 44 00 00 31 ff e8 65 d7 95 ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 64 02 00 00 31 ff e8 ae c5 9c ff fb 45 85 f6 <0f> 88 12 01 00 00 49 63 d6 4c 2b 24 24 48 8d 04 52 48 8d 04 82 49 [ 662.816063] RSP: 0018:ff2c2c4f18edbe80 EFLAGS: 00000202 [ 662.816065] RAX: ff280805df140000 RBX: 0000000000000002 RCX: 000000000000001f [ 662.816067] RDX: 0000009a52da2d08 RSI: ffffffff93f8240b RDI: ffffffff93f53ee7 [ 662.816068] RBP: ff5e2bd11ff41928 R08: 0000000000000000 R09: 000000000002f8c0 [ 662.816070] R10: 0000010c3f18e2cf R11: 000000000000000f R12: 0000009a52da2d08 [ 662.816071] R13: ffffffff94ad7e20 R14: 0000000000000002 R15: 0000000000000000 [ 662.816075] cpuidle_enter+0x29/0x40 [ 662.816077] do_idle+0x261/0x2b0 [ 662.816080] cpu_startup_entry+0x19/0x20 [ 662.816083] start_secondary+0x114/0x150 [ 662.816087] secondary_startup_64_no_verify+0xd5/0xdb [ 662.816091] </TASK> [ 662.816169] bad: scheduling from the idle thread! The correct place to unplug the aux devices for a reset is in the prepare_for_reset function, as this is a common place for all reset flows. It also has built in protection from being called twice in a single reset instance before the aux devices are replugged. Fixes: f9f5301e7e2d4 ("ice: Register auxiliary device to provide RDMA") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Helena Anna Dubel <helena.anna.dubel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-02ice: use bitmap_free instead of devm_kfreeMichal Swiatkowski
pf->avail_txqs was allocated using bitmap_zalloc, bitmap_free should be used to free this memory. Fixes: 78b5713ac1241 ("ice: Alloc queue management bitmaps and arrays dynamically") Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-02ice: Fix DMA mappings leakPrzemyslaw Patynowski
Fix leak, when user changes ring parameters. During reallocation of RX buffers, new DMA mappings are created for those buffers. New buffers with different RX ring count should substitute older ones, but those buffers were freed in ice_vsi_cfg_rxq and reallocated again with ice_alloc_rx_buf. kfree on rx_buf caused leak of already mapped DMA. Reallocate ZC with xdp_buf struct, when BPF program loads. Reallocate back to rx_buf, when BPF program unloads. If BPF program is loaded/unloaded and XSK pools are created, reallocate RX queues accordingly in XDP_SETUP_XSK_POOL handler. Steps for reproduction: while : do for ((i=0; i<=8160; i=i+32)) do ethtool -G enp130s0f0 rx $i tx $i sleep 0.5 ethtool -g enp130s0f0 done done Fixes: 617f3e1b588c ("ice: xsk: allocate separate memory for XDP SW ring") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Chandan <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-22ice: xsk: use Rx ring's XDP ring when picking NAPI contextMaciej Fijalkowski
Ice driver allocates per cpu XDP queues so that redirect path can safely use smp_processor_id() as an index to the array. At the same time though, XDP rings are used to pick NAPI context to call napi_schedule() or set NAPIF_STATE_MISSED. When user reduces queue count, say to 8, and num_possible_cpus() of underlying platform is 44, then this means queue vectors with correlated NAPI contexts will carry several XDP queues. This in turn can result in a broken behavior where NAPI context of interest will never be scheduled and AF_XDP socket will not process any traffic. To fix this, let us change the way how XDP rings are assigned to Rx rings and use this information later on when setting ice_tx_ring::xsk_pool pointer. For each Rx ring, grab the associated queue vector and walk through Tx ring's linked list. Once we stumble upon XDP ring in it, assign this ring to ice_rx_ring::xdp_ring. Previous [0] approach of fixing this issue was for txonly scenario because of the described grouping of XDP rings across queue vectors. So, relying on Rx ring meant that NAPI context could be scheduled with a queue vector without XDP ring with associated XSK pool. [0]: https://lore.kernel.org/netdev/20220707161128.54215-1-maciej.fijalkowski@intel.com/ Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Fixes: 22bf877e528f ("ice: introduce XDP_TX fallback path") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-22ice: xsk: prohibit usage of non-balanced queue idMaciej Fijalkowski
Fix the following scenario: 1. ethtool -L $IFACE rx 8 tx 96 2. xdpsock -q 10 -t -z Above refers to a case where user would like to attach XSK socket in txonly mode at a queue id that does not have a corresponding Rx queue. At this moment ice's XSK logic is tightly bound to act on a "queue pair", e.g. both Tx and Rx queues at a given queue id are disabled/enabled and both of them will get XSK pool assigned, which is broken for the presented queue configuration. This results in the splat included at the bottom, which is basically an OOB access to Rx ring array. To fix this, allow using the ids only in scope of "combined" queues reported by ethtool. However, logic should be rewritten to allow such configurations later on, which would end up as a complete rewrite of the control path, so let us go with this temporary fix. [420160.558008] BUG: kernel NULL pointer dereference, address: 0000000000000082 [420160.566359] #PF: supervisor read access in kernel mode [420160.572657] #PF: error_code(0x0000) - not-present page [420160.579002] PGD 0 P4D 0 [420160.582756] Oops: 0000 [#1] PREEMPT SMP NOPTI [420160.588396] CPU: 10 PID: 21232 Comm: xdpsock Tainted: G OE 5.19.0-rc7+ #10 [420160.597893] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [420160.609894] RIP: 0010:ice_xsk_pool_setup+0x44/0x7d0 [ice] [420160.616968] Code: f3 48 83 ec 40 48 8b 4f 20 48 8b 3f 65 48 8b 04 25 28 00 00 00 48 89 44 24 38 31 c0 48 8d 04 ed 00 00 00 00 48 01 c1 48 8b 11 <0f> b7 92 82 00 00 00 48 85 d2 0f 84 2d 75 00 00 48 8d 72 ff 48 85 [420160.639421] RSP: 0018:ffffc9002d2afd48 EFLAGS: 00010282 [420160.646650] RAX: 0000000000000050 RBX: ffff88811d8bdd00 RCX: ffff888112c14ff8 [420160.655893] RDX: 0000000000000000 RSI: ffff88811d8bdd00 RDI: ffff888109861000 [420160.665166] RBP: 000000000000000a R08: 000000000000000a R09: 0000000000000000 [420160.674493] R10: 000000000000889f R11: 0000000000000000 R12: 000000000000000a [420160.683833] R13: 000000000000000a R14: 0000000000000000 R15: ffff888117611828 [420160.693211] FS: 00007fa869fc1f80(0000) GS:ffff8897e0880000(0000) knlGS:0000000000000000 [420160.703645] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [420160.711783] CR2: 0000000000000082 CR3: 00000001d076c001 CR4: 00000000007706e0 [420160.721399] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [420160.731045] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [420160.740707] PKRU: 55555554 [420160.745960] Call Trace: [420160.750962] <TASK> [420160.755597] ? kmalloc_large_node+0x79/0x90 [420160.762703] ? __kmalloc_node+0x3f5/0x4b0 [420160.769341] xp_assign_dev+0xfd/0x210 [420160.775661] ? shmem_file_read_iter+0x29a/0x420 [420160.782896] xsk_bind+0x152/0x490 [420160.788943] __sys_bind+0xd0/0x100 [420160.795097] ? exit_to_user_mode_prepare+0x20/0x120 [420160.802801] __x64_sys_bind+0x16/0x20 [420160.809298] do_syscall_64+0x38/0x90 [420160.815741] entry_SYSCALL_64_after_hwframe+0x63/0xcd [420160.823731] RIP: 0033:0x7fa86a0dd2fb [420160.830264] Code: c3 66 0f 1f 44 00 00 48 8b 15 69 8b 0c 00 f7 d8 64 89 02 b8 ff ff ff ff eb bc 0f 1f 44 00 00 f3 0f 1e fa b8 31 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d 8b 0c 00 f7 d8 64 89 01 48 [420160.855410] RSP: 002b:00007ffc1146f618 EFLAGS: 00000246 ORIG_RAX: 0000000000000031 [420160.866366] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fa86a0dd2fb [420160.876957] RDX: 0000000000000010 RSI: 00007ffc1146f680 RDI: 0000000000000003 [420160.887604] RBP: 000055d7113a0520 R08: 00007fa868fb8000 R09: 0000000080000000 [420160.898293] R10: 0000000000008001 R11: 0000000000000246 R12: 000055d7113a04e0 [420160.909038] R13: 000055d7113a0320 R14: 000000000000000a R15: 0000000000000000 [420160.919817] </TASK> [420160.925659] Modules linked in: ice(OE) af_packet binfmt_misc nls_iso8859_1 ipmi_ssif intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp mei_me coretemp ioatdma mei ipmi_si wmi ipmi_msghandler acpi_pad acpi_power_meter ip_tables x_tables autofs4 ixgbe i40e crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd ahci mdio dca libahci lpc_ich [last unloaded: ice] [420160.977576] CR2: 0000000000000082 [420160.985037] ---[ end trace 0000000000000000 ]--- [420161.097724] RIP: 0010:ice_xsk_pool_setup+0x44/0x7d0 [ice] [420161.107341] Code: f3 48 83 ec 40 48 8b 4f 20 48 8b 3f 65 48 8b 04 25 28 00 00 00 48 89 44 24 38 31 c0 48 8d 04 ed 00 00 00 00 48 01 c1 48 8b 11 <0f> b7 92 82 00 00 00 48 85 d2 0f 84 2d 75 00 00 48 8d 72 ff 48 85 [420161.134741] RSP: 0018:ffffc9002d2afd48 EFLAGS: 00010282 [420161.144274] RAX: 0000000000000050 RBX: ffff88811d8bdd00 RCX: ffff888112c14ff8 [420161.155690] RDX: 0000000000000000 RSI: ffff88811d8bdd00 RDI: ffff888109861000 [420161.168088] RBP: 000000000000000a R08: 000000000000000a R09: 0000000000000000 [420161.179295] R10: 000000000000889f R11: 0000000000000000 R12: 000000000000000a [420161.190420] R13: 000000000000000a R14: 0000000000000000 R15: ffff888117611828 [420161.201505] FS: 00007fa869fc1f80(0000) GS:ffff8897e0880000(0000) knlGS:0000000000000000 [420161.213628] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [420161.223413] CR2: 0000000000000082 CR3: 00000001d076c001 CR4: 00000000007706e0 [420161.234653] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [420161.245893] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [420161.257052] PKRU: 55555554 Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-17ice: Fix VF not able to send tagged traffic with no VLAN filtersSylwester Dziedziuch
VF was not able to send tagged traffic when it didn't have any VLAN interfaces and VLAN anti-spoofing was enabled. Fix this by allowing VFs with no VLAN filters to send tagged traffic. After VF adds a VLAN interface it will be able to send tagged traffic matching VLAN filters only. Testing hints: 1. Spawn VF 2. Send tagged packet from a VF 3. The packet should be sent out and not dropped 4. Add a VLAN interface on VF 5. Send tagged packet on that VLAN interface 6. Packet should be sent out and not dropped 7. Send tagged packet with id different than VLAN interface 8. Packet should be dropped Fixes: daf4dd16438b ("ice: Refactor spoofcheck configuration functions") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-17ice: Ignore error message when setting same promiscuous modeBenjamin Mikailenko
Commit 1273f89578f2 ("ice: Fix broken IFF_ALLMULTI handling") introduced new checks when setting/clearing promiscuous mode. But if the requested promiscuous mode setting already exists, an -EEXIST error message would be printed. This is incorrect because promiscuous mode is either on/off and shouldn't print an error when the requested configuration is already set. This can happen when removing a bridge with two bonded interfaces and promiscuous most isn't fully cleared from VLAN VSI in hardware. Fix this by ignoring cases where requested promiscuous mode exists. Fixes: 1273f89578f2 ("ice: Fix broken IFF_ALLMULTI handling") Signed-off-by: Benjamin Mikailenko <benjamin.mikailenko@intel.com> Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/ Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-17ice: Fix clearing of promisc mode with bridge over bondGrzegorz Siwik
When at least two interfaces are bonded and a bridge is enabled on the bond, an error can occur when the bridge is removed and re-added. The reason for the error is because promiscuous mode was not fully cleared from the VLAN VSI in the hardware. With this change, promiscuous mode is properly removed when the bridge disconnects from bonding. [ 1033.676359] bond1: link status definitely down for interface enp95s0f0, disabling it [ 1033.676366] bond1: making interface enp175s0f0 the new active one [ 1033.676369] device enp95s0f0 left promiscuous mode [ 1033.676522] device enp175s0f0 entered promiscuous mode [ 1033.676901] ice 0000:af:00.0 enp175s0f0: Error setting Multicast promiscuous mode on VSI 6 [ 1041.795662] ice 0000:af:00.0 enp175s0f0: Error setting Multicast promiscuous mode on VSI 6 [ 1041.944826] bond1: link status definitely down for interface enp175s0f0, disabling it [ 1041.944874] device enp175s0f0 left promiscuous mode [ 1041.944918] bond1: now running without any active interface! Fixes: c31af68a1b94 ("ice: Add outer_vlan_ops and VSI specific VLAN ops implementations") Co-developed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/ Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Tested-by: Igor Raits <igor@gooddata.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-17ice: Ignore EEXIST when setting promisc modeGrzegorz Siwik
Ignore EEXIST error when setting promiscuous mode. This fix is needed because the driver could set promiscuous mode when it still has not cleared properly. Promiscuous mode could be set only once, so setting it second time will be rejected. Fixes: 5eda8afd6bcc ("ice: Add support for PF/VF promiscuous mode") Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/ Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Tested-by: Igor Raits <igor@gooddata.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-17ice: Fix double VLAN error when entering promisc modeGrzegorz Siwik
Avoid enabling or disabling VLAN 0 when trying to set promiscuous VLAN mode if double VLAN mode is enabled. This fix is needed because the driver tries to add the VLAN 0 filter twice (once for inner and once for outer) when double VLAN mode is enabled. The filter program is rejected by the firmware when double VLAN is enabled, because the promiscuous filter only needs to be set once. This issue was missed in the initial implementation of double VLAN mode. Fixes: 5eda8afd6bcc ("ice: Add support for PF/VF promiscuous mode") Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/ Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Tested-by: Igor Raits <igor@gooddata.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-15Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/netDavid S. Miller
-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-08-11 (ice) This series contains updates to ice driver only. Benjamin corrects a misplaced parenthesis for a WARN_ON check. Michal removes WARN_ON from a check as its recoverable and not warranting of a call trace. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-11ice: Fix call trace with null VSI during VF resetMichal Jaron
During stress test with attaching and detaching VF from KVM and simultaneously changing VFs spoofcheck and trust there was a call trace in ice_reset_vf that VF's VSI is null. [145237.352797] WARNING: CPU: 46 PID: 840629 at drivers/net/ethernet/intel/ice/ice_vf_lib.c:508 ice_reset_vf+0x3d6/0x410 [ice] [145237.352851] Modules linked in: ice(E) vfio_pci vfio_pci_core vfio_virqfd vfio_iommu_type1 vfio iavf dm_mod xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink tun bridge stp llc sunrpc intel_rapl_msr intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm iTCO_wdt iTC O_vendor_support irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel rapl ipmi_si intel_cstate ipmi_devintf joydev intel_uncore m ei_me ipmi_msghandler i2c_i801 pcspkr mei lpc_ich ioatdma i2c_smbus acpi_pad acpi_power_meter ip_tables xfs libcrc32c i2c_algo_bit drm_sh mem_helper drm_kms_helper sd_mod t10_pi crc64_rocksoft syscopyarea crc64 sysfillrect sg sysimgblt fb_sys_fops drm i40e ixgbe ahci libahci libata crc32c_intel mdio dca wmi fuse [last unloaded: ice] [145237.352917] CPU: 46 PID: 840629 Comm: kworker/46:2 Tainted: G S W I E 5.19.0-rc6+ #24 [145237.352921] Hardware name: Intel Corporation S2600WTT/S2600WTT, BIOS SE5C610.86B.01.01.0008.021120151325 02/11/2015 [145237.352923] Workqueue: ice ice_service_task [ice] [145237.352948] RIP: 0010:ice_reset_vf+0x3d6/0x410 [ice] [145237.352984] Code: 30 ec f3 cc e9 28 fd ff ff 0f b7 4b 50 48 c7 c2 48 19 9c c0 4c 89 ee 48 c7 c7 30 fe 9e c0 e8 d1 21 9d cc 31 c0 e9 a 9 fe ff ff <0f> 0b b8 ea ff ff ff e9 c1 fc ff ff 0f 0b b8 fb ff ff ff e9 91 fe [145237.352987] RSP: 0018:ffffb453e257fdb8 EFLAGS: 00010246 [145237.352990] RAX: ffff8bd0040181c0 RBX: ffff8be68db8f800 RCX: 0000000000000000 [145237.352991] RDX: 000000000000ffff RSI: 0000000000000000 RDI: ffff8be68db8f800 [145237.352993] RBP: ffff8bd0040181c0 R08: 0000000000001000 R09: ffff8bcfd520e000 [145237.352995] R10: 0000000000000000 R11: 00008417b5ab0bc0 R12: 0000000000000005 [145237.352996] R13: ffff8bcee061c0d0 R14: ffff8bd004019640 R15: 0000000000000000 [145237.352998] FS: 0000000000000000(0000) GS:ffff8be5dfb00000(0000) knlGS:0000000000000000 [145237.353000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [145237.353002] CR2: 00007fd81f651d68 CR3: 0000001a0fe10001 CR4: 00000000001726e0 [145237.353003] Call Trace: [145237.353008] <TASK> [145237.353011] ice_process_vflr_event+0x8d/0xb0 [ice] [145237.353049] ice_service_task+0x79f/0xef0 [ice] [145237.353074] process_one_work+0x1c8/0x390 [145237.353081] ? process_one_work+0x390/0x390 [145237.353084] worker_thread+0x30/0x360 [145237.353087] ? process_one_work+0x390/0x390 [145237.353090] kthread+0xe8/0x110 [145237.353094] ? kthread_complete_and_exit+0x20/0x20 [145237.353097] ret_from_fork+0x22/0x30 [145237.353103] </TASK> Remove WARN_ON() from check if VSI is null in ice_reset_vf. Add "VF is already removed\n" in dev_dbg(). This WARN_ON() is unnecessary and causes call trace, despite that call trace, driver still works. There is no need for this warn because this piece of code is responsible for disabling VF's Tx/Rx queues when VF is disabled, but when VF is already removed there is no need to do reset or disable queues. Fixes: efe41860008e ("ice: Fix memory corruption in VF driver") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-11ice: Fix VSI rebuild WARN_ON check for VFBenjamin Mikailenko
In commit b03d519d3460 ("ice: store VF pointer instead of VF ID") WARN_ON checks were added to validate the vsi->vf pointer and catch programming errors. However, one check to vsi->vf was missed. This caused a call trace when resetting VFs. Fix ice_vsi_rebuild by encompassing VF pointer in WARN_ON check. Fixes: b03d519d3460 ("ice: store VF pointer instead of VF ID") Signed-off-by: Benjamin Mikailenko <benjamin.mikailenko@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-07Merge tag 'bitmap-6.0-rc1' of https://github.com/norov/linuxLinus Torvalds
Pull bitmap updates from Yury Norov: - fix the duplicated comments on bitmap_to_arr64() (Qu Wenruo) - optimize out non-atomic bitops on compile-time constants (Alexander Lobakin) - cleanup bitmap-related headers (Yury Norov) - x86/olpc: fix 'logical not is only applied to the left hand side' (Alexander Lobakin) - lib/nodemask: inline wrappers around bitmap (Yury Norov) * tag 'bitmap-6.0-rc1' of https://github.com/norov/linux: (26 commits) lib/nodemask: inline next_node_in() and node_random() powerpc: drop dependency on <asm/machdep.h> in archrandom.h x86/olpc: fix 'logical not is only applied to the left hand side' lib/cpumask: move some one-line wrappers to header file headers/deps: mm: align MANITAINERS and Docs with new gfp.h structure headers/deps: mm: Split <linux/gfp_types.h> out of <linux/gfp.h> headers/deps: mm: Optimize <linux/gfp.h> header dependencies lib/cpumask: move trivial wrappers around find_bit to the header lib/cpumask: change return types to unsigned where appropriate cpumask: change return types to bool where appropriate lib/bitmap: change type of bitmap_weight to unsigned long lib/bitmap: change return types to bool where appropriate arm: align find_bit declarations with generic kernel iommu/vt-d: avoid invalid memory access via node_online(NUMA_NO_NODE) lib/test_bitmap: test the tail after bitmap_to_arr64() lib/bitmap: fix off-by-one in bitmap_to_arr64() lib: test_bitmap: add compile-time optimization/evaluations assertions bitmap: don't assume compiler evaluates small mem*() builtins calls net/ice: fix initializing the bitmap in the switch code bitops: let optimize out non-atomic bitops on compile-time constants ...
2022-08-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Conflicts: net/ax25/af_ax25.c d7c4c9e075f8c ("ax25: fix incorrect dev_tracker usage") d62607c3fe459 ("net: rename reference+tracking helpers") drivers/net/netdevsim/fib.c 180a6a3ee60a ("netdevsim: fib: Fix reference count leak on route deletion failure") 012ec02ae441 ("netdevsim: convert driver to use unlocked devlink API during init/fini") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-01net: ice: fix error NETIF_F_HW_VLAN_CTAG_FILTER check in ice_vsi_sync_fltr()Jian Shen
vsi->current_netdev_flags is used store the current net device flags, not the active netdevice features. So it should use vsi->netdev->featurs, rather than vsi->current_netdev_flags to check NETIF_F_HW_VLAN_CTAG_FILTER. Fixes: 1babaf77f49d ("ice: Advertise 802.1ad VLAN filtering and offloads for PF netdev") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-01Merge branch '1GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 1GbE Intel Wired LAN Driver Updates 2022-07-28 Jacob Keller says: Convert all of the Intel drivers with PTP support to the newer .adjfine implementation which uses scaled parts per million. This improves the precision of the frequency adjustments by taking advantage of the full scaled parts per million input coming from user space. In addition, all implementations are converted to using the mul_u64_u64_div_u64 function which better handles the intermediate value. This function supports architecture specific instructions where possible to avoid loss of precision if the normal 64-bit multiplication would overflow. Of note, the i40e implementation is now able to avoid loss of precision on slower link speeds by taking advantage of this to multiply by the link speed factor first. This results in a significantly more precise adjustment by allowing the calculation to impact the lower bits. This also gets us a step closer to being able to remove the .adjfreq entirely by removing its use from many drivers. I plan to follow this up with a series to update the drivers from other vendors and drop the .adjfreq implementation entirely. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: igb: convert .adjfreq to .adjfine ixgbe: convert .adjfreq to .adjfine i40e: convert .adjfreq to .adjfine i40e: use mul_u64_u64_div_u64 for PTP frequency calculation e1000e: convert .adjfreq to .adjfine e1000e: remove unnecessary range check in e1000e_phc_adjfreq ice: implement adjfine with mul_u64_u64_div_u64 ==================== Link: https://lore.kernel.org/r/20220728181836.3387862-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-29Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2022-07-28 This series contains updates to ice driver only. Michal allows for VF true promiscuous mode to be set for multiple VFs and adds clearing of promiscuous filters when VF trust is removed. Maciej refactors ice_set_features() to track/check changed features instead of constantly checking against netdev features and adds support for NETIF_F_LOOPBACK. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: allow toggling loopback mode via ndo_set_features callback ice: compress branches in ice_set_features() ice: Fix promiscuous mode not turning off ice: Introduce enabling promiscuous mode on multiple VF's ==================== Link: https://lore.kernel.org/r/20220728195538.3391360-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28ice: allow toggling loopback mode via ndo_set_features callbackMaciej Fijalkowski
Add support for NETIF_F_LOOPBACK. This feature can be set via: $ ethtool -K eth0 loopback <on|off> Feature can be useful for local data path tests. Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-28ice: compress branches in ice_set_features()Maciej Fijalkowski
Instead of rather verbose comparison of current netdev->features bits vs the incoming ones from user, let us compress them by a helper features set that will be the result of netdev->features XOR features. This way, current, extensive branches: if (features & NETIF_F_BIT && !(netdev->features & NETIF_F_BIT)) set_feature(true); else if (!(features & NETIF_F_BIT) && netdev->features & NETIF_F_BIT) set_feature(false); can become: netdev_features_t changed = netdev->features ^ features; if (changed & NETIF_F_BIT) set_feature(!!(features & NETIF_F_BIT)); This is nothing new as currently several other drivers use this approach, which I find much more convenient. Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-28ice: Fix promiscuous mode not turning offMichal Wilczynski
When trust is turned off for the VF, the expectation is that promiscuous and allmulticast filters are removed. Currently default VSI filter is not getting cleared in this flow. Example: ip link set enp236s0f0 vf 0 trust on ip link set enp236s0f0v0 promisc on ip link set enp236s0f0 vf 0 trust off /* promiscuous mode is still enabled on VF0 */ Remove switch filters for both cases. This commit fixes above behavior by removing default VSI filters and allmulticast filters when vf-true-promisc-support is OFF. Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-28ice: Introduce enabling promiscuous mode on multiple VF'sMichal Wilczynski
In current implementation default VSI switch filter is only able to forward traffic to a single VSI. This limits promiscuous mode with private flag 'vf-true-promisc-support' to a single VF. Enabling it on the second VF won't work. Also allmulticast support doesn't seem to be properly implemented when vf-true-promisc-support is true. Use standard ice_add_rule_internal() function that already implements forwarding to multiple VSI's instead of constructing AQ call manually. Add switch filter for allmulticast mode when vf-true-promisc-support is enabled. The same filter is added regardless of the flag - it doesn't matter for this case. Remove unnecessary fields in switch structure. From now on book keeping will be done by ice_add_rule_internal(). Refactor unnecessarily passed function arguments. To test: 1) Create 2 VM's, and two VF's. Attach VF's to VM's. 2) Enable promiscuous mode on both of them and check if traffic is seen on both of them. Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-28ice: implement adjfine with mul_u64_u64_div_u64Jacob Keller
The PTP frequency adjustment code needs to determine an appropriate adjustment given an input scaled_ppm adjustment. We calculate the adjustment to the register by multiplying the base (nominal) increment value by the scaled_ppm and then dividing by the scaled one million value. For very large adjustments, this might overflow. To avoid this, both the scaled_ppm and divisor values are downshifted. We can avoid that on X86 architectures by using mul_u64_u64_div_u64. This helper function will perform the multiplication and division with 128bit intermediate values. We know that scaled_ppm is never larger than the divisor so this operation will never result in an overflow. This improves the accuracy of the calculations for large adjustment values on X86. It is likely an improvement on other architectures as well because the default implementation of mul_u64_u64_div_u64 is smarter than the original approach taken in the ice code. Additionally, this implementation is easier to read, using fewer local variables and lines of code to implement. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26ice: do not setup vlan for loopback VSIMaciej Fijalkowski
Currently loopback test is failiing due to the error returned from ice_vsi_vlan_setup(). Skip calling it when preparing loopback VSI. Fixes: 0e674aeb0b77 ("ice: Add handler for ethtool selftest") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26ice: check (DD | EOF) bits on Rx descriptor rather than (EOP | RS)Maciej Fijalkowski
Tx side sets EOP and RS bits on descriptors to indicate that a particular descriptor is the last one and needs to generate an irq when it was sent. These bits should not be checked on completion path regardless whether it's the Tx or the Rx. DD bit serves this purpose and it indicates that a particular descriptor is either for Rx or was successfully Txed. EOF is also set as loopback test does not xmit fragmented frames. Look at (DD | EOF) bits setting in ice_lbtest_receive_frames() instead of EOP and RS pair. Fixes: 0e674aeb0b77 ("ice: Add handler for ethtool selftest") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26ice: Fix VSIs unable to share unicast MACAnirudh Venkataramanan
The driver currently does not allow two VSIs in the same PF domain to have the same unicast MAC address. This is incorrect in the sense that a policy decision is being made in the driver when it must be left to the user. This approach was causing issues when rebooting the system with VFs spawned not being able to change their MAC addresses. Such errors were present in dmesg: [ 7921.068237] ice 0000:b6:00.2 ens2f2: Unicast MAC 6a:0d:e4:70:ca:d1 already exists on this PF. Preventing setting VF 7 unicast MAC address to 6a:0d:e4:70:ca:d1 Fix that by removing this restriction. Doing this also allows us to remove some additional code that's checking if a unicast MAC filter already exists. Fixes: 47ebc7b02485 ("ice: Check if unicast MAC exists before setting VF MAC") Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26ice: Fix tunnel checksum offload with fragmented trafficPrzemyslaw Patynowski
Fix checksum offload on VXLAN tunnels. In case, when mpls protocol is not used, set l4 header to transport header of skb. This fixes case, when user tries to offload checksums of VXLAN tunneled traffic. Steps for reproduction (requires link partner with tunnels): ip l s enp130s0f0 up ip a f enp130s0f0 ip a a 10.10.110.2/24 dev enp130s0f0 ip l s enp130s0f0 mtu 1600 ip link add vxlan12_sut type vxlan id 12 group 238.168.100.100 dev enp130s0f0 dstport 4789 ip l s vxlan12_sut up ip a a 20.10.110.2/24 dev vxlan12_sut iperf3 -c 20.10.110.1 #should connect Offload params: td_offset, cd_tunnel_params were corrupted, due to l4 header pointing wrong address. NIC would then drop those packets internally, due to incorrect TX descriptor data, which increased GLV_TEPC register. Fixes: 69e66c04c672 ("ice: Add mpls+tso support") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26ice: Fix max VLANs available for VFPrzemyslaw Patynowski
Legacy VLAN implementation allows for untrusted VF to have 8 VLAN filters, not counting VLAN 0 filters. Current VLAN_V2 implementation lowers available filters for VF, by counting in VLAN 0 filter for both TPIDs. Fix this by counting only non zero VLAN filters. Without this patch, untrusted VF would not be able to access 8 VLAN filters. Fixes: cc71de8fa133 ("ice: Add support for VIRTCHNL_VF_OFFLOAD_VLAN_V2") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26ice: Add support for PPPoE hardware offloadMarcin Szycik
Add support for creating PPPoE filters in switchdev mode. Add support for parsing PPPoE and PPP-specific tc options: pppoe_sid and ppp_proto. Example filter: tc filter add dev $PF1 ingress protocol ppp_ses prio 1 flower pppoe_sid \ 1234 ppp_proto ip skip_sw action mirred egress redirect dev $VF1_PR Changes in iproute2 are required to use the new fields. ICE COMMS DDP package is required to create a filter as it contains PPPoE profiles. Added a warning message when loaded DDP package does not contain required profiles. Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-21ice: add write functionality for GNSS TTYKarol Kolacinski
Add the possibility to write raw bytes to the GNSS module through the first TTY device. This allows user to configure the module. Create a second read-only TTY device. Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-21ice: add i2c write commandKarol Kolacinski
Add the possibility to write to connected i2c devices using the AQ command. FW may reject the write if the device is not on allowlist. Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-15ice: Remove pci_aer_clear_nonfatal_status() callZhuo Chen
After commit 62b36c3ea664 ("PCI/AER: Remove pci_cleanup_aer_uncorrect_error_status() calls"), calls to pci_cleanup_aer_uncorrect_error_status() have already been removed. But in commit 5995b6d0c6fc ("ice: Implement pci_error_handler ops") pci_cleanup_aer_uncorrect_error_status was used again, so remove it in this patch. Signed-off-by: Zhuo Chen <chenzhuo.1@bytedance.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Sen Wang <wangsen.harry@bytedance.com> Cc: Wenliang Wang <wangwenliang.1995@bytedance.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-15ice: Add EXTTS feature to the feature bitmapAnirudh Venkataramanan
External time stamp sources are supported only on certain devices. Enforce the right support matrix by adding the ICE_F_PTP_EXTTS bit to the feature bitmap set. Co-developed-by: Maciej Machnikowski <maciej.machnikowski@intel.com> Signed-off-by: Maciej Machnikowski <maciej.machnikowski@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
include/net/sock.h 310731e2f161 ("net: Fix data-races around sysctl_mem.") e70f3c701276 ("Revert "net: set SK_MEM_QUANTUM to 4096"") https://lore.kernel.org/all/20220711120211.7c8b7cba@canb.auug.org.au/ net/ipv4/fib_semantics.c 747c14307214 ("ip: fix dflt addr selection for connected nexthop") d62607c3fe45 ("net: rename reference+tracking helpers") net/tls/tls.h include/net/tls.h 3d8c51b25a23 ("net/tls: Check for errors in tls_device_init") 587903142308 ("tls: create an internal header") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-12ice: change devlink code to read NVM in blocksPaul M Stillwell Jr
When creating a snapshot of the NVM the driver needs to read the entire contents from the NVM and store it. The NVM reads are protected by a lock that is shared between the driver and the firmware. If the driver takes too long to read the entire NVM (which can happen on some systems) then the firmware could reclaim the lock and cause subsequent reads from the driver to fail. We could fix this by increasing the timeout that we pass to the firmware, but we could end up in the same situation again if the system is slow. Instead have the driver break the reading of the NVM into blocks that are small enough that we have confidence that the read will complete within the timeout time, but large enough not to cause significant AQ overhead. Fixes: dce730f17825 ("ice: add a devlink region for dumping NVM contents") Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-12ice: handle E822 generic device ID in PLDM headerPaul M Stillwell Jr
The driver currently presumes that the record data in the PLDM header of the firmware image will match the device ID of the running device. This is true for E810 devices. It appears that for E822 devices that this is not guaranteed to be true. Fix this by adding a check for the generic E822 device. Fixes: d69ea414c9b4 ("ice: implement device flash update via devlink") Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-01Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/nexDavid S. Miller
t-queue Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2022-06-30 This series contains updates to ice driver only. Martyna adds support for VLAN related TC switchdev filters and reworks dummy packet implementation of VLANs to enable dynamic header insertion to allow for more rule types. Lu Wei utilizes eth_broadcast_addr() helper over an open coded version. Ziyang Xuan removes unneeded NULL checks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-30net/ice: fix initializing the bitmap in the switch codeAlexander Lobakin
Kbuild spotted the following bug during the testing of one of the optimizations: In file included from include/linux/cpumask.h:12, [...] from drivers/net/ethernet/intel/ice/ice_switch.c:4: drivers/net/ethernet/intel/ice/ice_switch.c: In function 'ice_find_free_recp_res_idx.constprop': include/linux/bitmap.h:447:22: warning: 'possible_idx[0]' is used uninitialized [-Wuninitialized] 447 | *map |= GENMASK(start + nbits - 1, start); | ^~ In file included from drivers/net/ethernet/intel/ice/ice.h:7, from drivers/net/ethernet/intel/ice/ice_lib.h:7, from drivers/net/ethernet/intel/ice/ice_switch.c:4: drivers/net/ethernet/intel/ice/ice_switch.c:4929:24: note: 'possible_idx[0]' was declared here 4929 | DECLARE_BITMAP(possible_idx, ICE_MAX_FV_WORDS); | ^~~~~~~~~~~~ include/linux/types.h:11:23: note: in definition of macro 'DECLARE_BITMAP' 11 | unsigned long name[BITS_TO_LONGS(bits)] | ^~~~ %ICE_MAX_FV_WORDS is 48, so bitmap_set() here was initializing only 48 bits, leaving a junk in the rest 16. It was previously hidden due to that filling 48 bits makes bitmap_set() call external __bitmap_set(), but after making it use plain bit arithmetics on small bitmaps, compilers started seeing the issue. It was still working because those 16 weren't used anywhere anyhow. bitmap_{clear,set}() are not really intended to initialize bitmaps, rather to modify already initialized ones, as they don't do anything past the passed number of bits. The correct function to do this in that particular case is bitmap_fill(), so use it here. It will do `*possible_idx = ~0UL` instead of `*possible_idx |= GENMASK(47, 0)`, not leaving anything in an undefined state. Fixes: fd2a6b71e300 ("ice: create advanced switch recipe") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Yury Norov <yury.norov@gmail.com>
2022-06-30intel/ice:fix repeated words in commentsJilin Yuan
Delete the redundant word 'a'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-30ice: Remove unnecessary NULL check before dev_putZiyang Xuan
Since commit b37a46683739 ("netdevice: add the case if dev is NULL"), dev_put(NULL) is safe, check NULL before dev_put() is not needed. Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-30ice: use eth_broadcast_addr() to set broadcast addressLu Wei
Use eth_broadcast_addr() to set broadcast address instead of memset(). Signed-off-by: Lu Wei <luwei32@huawei.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-30ice: switch: dynamically add VLAN headers to dummy packetsMartyna Szapar-Mudlaw
Enable the support of creating all kinds of declared dummy packets with the VLAN tags by inserting VLAN headers (single VLAN and QinQ cases) if needed. Decrease the number of declared dummy packets and increase in the possible packet's combinations for adding switch rules. This change enables support of creating filters that match both on VLAN + tunnels properties in switchdev. Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@intel.com> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-27 07:12:36 +0000