summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/microchip/lan743x_main.c
AgeCommit message (Collapse)Author
2022-09-28net: drop the weight argument from netif_napi_addJakub Kicinski
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-09net: lan743x: Add support for Rx IP & TCP checksum offloadRaju Lakkaraju
Add Rx IP and TCP checksum offload Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-09net: lan743x: Fix to use multiqueue start/stop APIsRaju Lakkaraju
- Fix to use multiqueue start/stop APIs - Change to return NETDEV_TX_BUSY instead of holding the TX skb when busy - Increase Tx ring size to 128 to address performance issues in some platforms - Use NAPI_POLL_WEIGHT for Tx Napi handler instead of ring dependent value - Use multiqueue to register 4 Rx channels Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-24net: lan743x: Use correct variable in lan743x_sgmii_config()Dan Carpenter
There is a copy and paste bug in lan743x_sgmii_config() so it checks if (ret < 0) instead of if (mii_ctl < 0). Fixes: 46b777ad9a8c ("net: lan743x: Add support to SGMII 1G and 2.5G") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/YrRry7K66BzKezl8@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-16net: lan743x: Add support to SGMII 1G and 2.5GRaju Lakkaraju
Add SGMII access read and write functions Add support to SGMII 1G and 2.5G for PCI11010/PCI11414 chips Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-16net: lan743x: Add support to Secure-ON WOLRaju Lakkaraju
Add support to Magic Packet Detection with Secure-ON for PCI11010/PCI11414 chips Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-27net: lan743x: PCI11010 / PCI11414 fixRaju Lakkaraju
Fix the MDIO interface declarations to reflect what is currently supported by the PCI11010 / PCI11414 devices (C22 for RGMII and C22_C45 for SGMII) Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-05net: move snowflake callers to netif_napi_add_tx_weight()Jakub Kicinski
Make the drivers with custom tx napi weight call netif_napi_add_tx_weight(). Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://lore.kernel.org/r/20220504163725.550782-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-18net: lan743x: Add support for EEPROMRaju Lakkaraju
Add new the EEPROM read and write access functions and system lock protection to access by devices for PCI11010/PCI11414 chips Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-18net: lan743x: Add support to display Tx Queue statisticsRaju Lakkaraju
Tx 4 queue statistics display through ethtool application Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-13net: lan743x: Add support for Clause-45 MDIO PHY managementRaju Lakkaraju
Add support for Clause-45 MDIO PHY management Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-13net: lan743x: Add support for SGMII interfaceRaju Lakkaraju
This change facilitates the selection between SGMII and (R)GIII interfaces Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-13net: lan743x: Increase MSI(x) vectors to 16 and Int de-assertion timers to 10Raju Lakkaraju
Increase MSI / MSI-X vectors supported from 8 to 16 and Interrupt De-assertion timers from 8 to 10 Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-13net: lan743x: Add support for 4 Tx queuesRaju Lakkaraju
Add support for 4 Tx queues Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-13net: lan743x: Add PCI11010 / PCI11414 device IDsRaju Lakkaraju
PCI11010/PCI11414 devices are enhancement of Ethernet LAN743x chip family. Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-09lan743x: Remove useless DMA-32 fallback configurationChristophe JAILLET
As stated in [1], dma_set_mask() with a 64-bit mask never fails if dev->dma_mask is non-NULL. So, if it fails, the 32 bits case will also fail for the same reason. Simplify code and remove some dead code accordingly. [1]: https://lkml.org/lkml/2021/6/7/398 Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/ef548716606f257939df9738a801f15b6edf2568.1641743405.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-24lan743x: fix deadlock in lan743x_phy_link_status_change()Heiner Kallweit
Usage of phy_ethtool_get_link_ksettings() in the link status change handler isn't needed, and in combination with the referenced change it results in a deadlock. Simply remove the call and replace it with direct access to phydev->speed. The duplex argument of lan743x_phy_update_flowcontrol() isn't used and can be removed. Fixes: c10a485c3de5 ("phy: phy_ethtool_ksettings_get: Lock the phy for consistency") Reported-by: Alessandro B Maurici <abmaurici@gmail.com> Tested-by: Alessandro B Maurici <abmaurici@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/40e27f76-0ba3-dcef-ee32-a78b9df38b0f@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
include/net/sock.h 7b50ecfcc6cd ("net: Rename ->stream_memory_read to ->sock_is_readable") 4c1e34c0dbff ("vsock: Enable y2038 safe timeval for timeout") drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c 0daa55d033b0 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table") e77bcdd1f639 ("octeontx2-af: Display all enabled PF VF rsrc_alloc entries.") Adjacent code addition in both cases, keep both. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-28net: ethernet: microchip: lan743x: Fix skb allocation failureYuiko Oshino
The driver allocates skb during ndo_open with GFP_ATOMIC which has high chance of failure when there are multiple instances. GFP_KERNEL is enough while open and use GFP_ATOMIC only from interrupt context. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: ethernet: microchip: lan743x: Fix dma allocation failure by using ↵Yuiko Oshino
dma_set_mask_and_coherent The dma failure was reported in the raspberry pi github (issue #4117). https://github.com/raspberrypi/linux/issues/4117 The use of dma_set_mask_and_coherent fixes the issue. Tested on 32/64-bit raspberry pi CM4 and 64-bit ubuntu x86 PC with EVB-LAN7430. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: ethernet: microchip: lan743x: Fix driver crash when lan743x_pm_resume failsYuiko Oshino
The driver needs to clean up and return when the initialization fails on resume. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ethernet: use eth_hw_addr_set() instead of ether_addr_copy()Jakub Kicinski
Convert Ethernet from ether_addr_copy() to eth_hw_addr_set(): @@ expression dev, np; @@ - ether_addr_copy(dev->dev_addr, np) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-13of: net: pass the dst buffer to of_get_mac_address()Michael Walle
of_get_mac_address() returns a "const void*" pointer to a MAC address. Lately, support to fetch the MAC address by an NVMEM provider was added. But this will only work with platform devices. It will not work with PCI devices (e.g. of an integrated root complex) and esp. not with DSA ports. There is an of_* variant of the nvmem binding which works without devices. The returned data of a nvmem_cell_read() has to be freed after use. On the other hand the return of_get_mac_address() points to some static data without a lifetime. The trick for now, was to allocate a device resource managed buffer which is then returned. This will only work if we have an actual device. Change it, so that the caller of of_get_mac_address() has to supply a buffer where the MAC address is written to. Unfortunately, this will touch all drivers which use the of_get_mac_address(). Usually the code looks like: const char *addr; addr = of_get_mac_address(np); if (!IS_ERR(addr)) ether_addr_copy(ndev->dev_addr, addr); This can then be simply rewritten as: of_get_mac_address(np, ndev->dev_addr); Sometimes is_valid_ether_addr() is used to test the MAC address. of_get_mac_address() already makes sure, it just returns a valid MAC address. Thus we can just test its return code. But we have to be careful if there are still other sources for the MAC address before the of_get_mac_address(). In this case we have to keep the is_valid_ether_addr() call. The following coccinelle patch was used to convert common cases to the new style. Afterwards, I've manually gone over the drivers and fixed the return code variable: either used a new one or if one was already available use that. Mansour Moufid, thanks for that coccinelle patch! <spml> @a@ identifier x; expression y, z; @@ - x = of_get_mac_address(y); + x = of_get_mac_address(y, z); <... - ether_addr_copy(z, x); ...> @@ identifier a.x; @@ - if (<+... x ...+>) {} @@ identifier a.x; @@ if (<+... x ...+>) { ... } - else {} @@ identifier a.x; expression e; @@ - if (<+... x ...+>@e) - {} - else + if (!(e)) {...} @@ expression x, y, z; @@ - x = of_get_mac_address(y, z); + of_get_mac_address(y, z); ... when != x </spml> All drivers, except drivers/net/ethernet/aeroflex/greth.c, were compile-time tested. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: MAINTAINERS - keep Chandrasekar drivers/net/ethernet/mellanox/mlx5/core/en_main.c - simple fix + trust the code re-added to param.c in -next is fine include/linux/bpf.h - trivial include/linux/ethtool.h - trivial, fix kdoc while at it include/linux/skmsg.h - move to relevant place in tcp.c, comment re-wrapped net/core/skmsg.c - add the sk = sk // sk = NULL around calls net/tipc/crypto.c - trivial Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-09lan743x: fix ethernet frame cutoff issueSven Van Asbroeck
The ethernet frame length is calculated incorrectly. Depending on the value of RX_HEAD_PADDING, this may result in ethernet frames that are too short (cut off at the end), or too long (garbage added to the end). Fix by calculating the ethernet frame length correctly. For added clarity, use the ETH_FCS_LEN constant in the calculation. Many thanks to Heiner Kallweit for suggesting this solution. Suggested-by: Heiner Kallweit <hkallweit1@gmail.com> Fixes: 3e21a10fdea3 ("lan743x: trim all 4 bytes of the FCS; not just 2") Link: https://lore.kernel.org/lkml/20210408172353.21143-1-TheSven73@gmail.com/ Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Reviewed-by: George McCollister <george.mccollister@gmail.com> Tested-by: George McCollister <george.mccollister@gmail.com> Link: https://lore.kernel.org/r/20210409003904.8957-1-TheSven73@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-01lan743x: remove redundant semi-colonYang Yingliang
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-05lan743x: trim all 4 bytes of the FCS; not just 2George McCollister
Trim all 4 bytes of the received FCS; not just 2 of them. Leaving 2 bytes of the FCS on the frame breaks DSA tailing tag drivers. Fixes: a8db76d40e4d ("lan743x: boost performance on cpu archs w/o dma cache snooping") Signed-off-by: George McCollister <george.mccollister@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16lan743x: sync only the received area of an rx ring bufferSven Van Asbroeck
On cpu architectures w/o dma cache snooping, dma_unmap() is a is a very expensive operation, because its resulting sync needs to invalidate cpu caches. Increase efficiency/performance by syncing only those sections of the lan743x's rx ring buffers that are actually in use. Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Reviewed-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16lan743x: boost performance on cpu archs w/o dma cache snoopingSven Van Asbroeck
The buffers in the lan743x driver's receive ring are always 9K, even when the largest packet that can be received (the mtu) is much smaller. This performs particularly badly on cpu archs without dma cache snooping (such as ARM): each received packet results in a 9K dma_{map|unmap} operation, which is very expensive because cpu caches need to be invalidated. Careful measurement of the driver rx path on armv7 reveals that the cpu spends the majority of its time waiting for cache invalidation. Optimize by keeping the rx ring buffer size as close as possible to the mtu. This limits the amount of cache that requires invalidation. This optimization would normally force us to re-allocate all ring buffers when the mtu is changed - a disruptive event, because it can only happen when the network interface is down. Remove the need to re-allocate all ring buffers by adding support for multi-buffer frames. Now any combination of mtu and ring buffer size will work. When the mtu changes from mtu1 to mtu2, consumed buffers of size mtu1 are lazily replaced by newly allocated buffers of size mtu2. These optimizations double the rx performance on armv7. Third parties report 3x rx speedup on armv8. Tested with iperf3 on a freescale imx6qp + lan7430, both sides set to mtu 1500 bytes, measure rx performance: Before: [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-20.00 sec 550 MBytes 231 Mbits/sec 0 After: [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-20.00 sec 1.33 GBytes 570 Mbits/sec 0 Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Reviewed-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-28lan743x: fix endianness when accessing descriptorsAlexey Denisov
TX/RX descriptor ring fields are always little-endian, but conversion wasn't performed for big-endian CPUs, so the driver failed to work. This patch makes the driver work on big-endian CPUs. It was tested and confirmed to work on NXP P1010 processor (PowerPC). Signed-off-by: Alexey Denisov <rtgbnm@gmail.com> Link: https://lore.kernel.org/r/20210128044859.280219-1-rtgbnm@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-16lan743x: fix rx_napi_poll/interrupt ping-pongSven Van Asbroeck
Even if there is more rx data waiting on the chip, the rx napi poll fn will never run more than once - it will always read a few buffers, then bail out and re-arm interrupts. Which results in ping-pong between napi and interrupt. This defeats the purpose of napi, and is bad for performance. Fix by making the rx napi poll behave identically to other ethernet drivers: 1. initialize rx napi polling with an arbitrary budget (64). 2. in the polling fn, return full weight if rx queue is not depleted, this tells the napi core to "keep polling". 3. update the rx tail ("ring the doorbell") once for every 8 processed rx ring buffers. Thanks to Jakub Kicinski, Eric Dumazet and Andrew Lunn for their expert opinions and suggestions. Tested with 20 seconds of full bandwidth receive (iperf3): rx irqs softirqs(NET_RX) ----------------------------- before 23827 33620 after 129 4081 Tested-by: Sven Van Asbroeck <thesven73@gmail.com> # lan7430 Fixes: 23f0703c125be ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Link: https://lore.kernel.org/r/20201215161954.5950-1-TheSven73@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-24lan743x: replace polling loop by wait_event_timeout()Sven Van Asbroeck
The driver's ISR sends a 'software interrupt' event to the probe() thread using the following method: - probe(): write 0 to flag, enable s/w interrupt - probe(): poll on flag, relax using usleep_range() - ISR : write 1 to flag Replace with wake_up() / wait_event_timeout(). Besides being easier to get right, this abstraction has better timing and memory consistency properties. Tested-by: Sven Van Asbroeck <thesven73@gmail.com> # lan7430 Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Link: https://lore.kernel.org/r/20201123191529.14908-2-TheSven73@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-24lan743x: clean up software_isr functionSven Van Asbroeck
For no apparent reason, this function reads the INT_STS register, and checks if the software interrupt bit is set. These things have already been carried out by this function's only caller. Clean up by removing the redundant code. Tested-by: Sven Van Asbroeck <thesven73@gmail.com> # lan7430 Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Link: https://lore.kernel.org/r/20201123191529.14908-1-TheSven73@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-19Merge https://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17lan743x: replace devicetree phy parse code with library functionSven Van Asbroeck
The code in this driver which parses the devicetree to determine the phy/fixed link setup, can be replaced by a single library function: of_phy_get_and_connect(). Behaviour is identical, except that the library function will complain when 'phy-connection-type' is omitted, instead of blindly using PHY_INTERFACE_MODE_NA, which would result in an invalid phy configuration. The library function no longer brings out the exact phy_mode, but the driver doesn't need this, because phy_interface_is_rgmii() queries the phydev directly. Remove 'phy_mode' from the private adapter struct. While we're here, log info about the attached phy on connect, this is useful because the phy type and connection method is now fully configurable via the devicetree. Tested on a lan7430 chip with built-in phy. Verified that adding fixed-link/phy-connection-type in the devicetree results in a fixed-link setup. Used ethtool to verify that the devicetree settings are used. Tested-by: Sven Van Asbroeck <thesven73@gmail.com> # lan7430 Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201116170155.26967-1-TheSven73@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-14lan743x: prevent entire kernel HANG on open, for some platformsSven Van Asbroeck
On arm imx6, when opening the chip's netdev, the whole Linux kernel intermittently hangs/freezes. This is caused by a bug in the driver code which tests if pcie interrupts are working correctly, using the software interrupt: 1. open: enable the software interrupt 2. open: tell the chip to assert the software interrupt 3. open: wait for flag 4. ISR: acknowledge s/w interrupt, set flag 5. open: notice flag, disable the s/w interrupt, continue Unfortunately the ISR only acknowledges the s/w interrupt, but does not disable it. This will re-trigger the ISR in a tight loop. On some (lucky) platforms, open proceeds to disable the s/w interrupt even while the ISR is 'spinning'. On arm imx6, the spinning ISR does not allow open to proceed, resulting in a hung Linux kernel. Fix minimally by disabling the s/w interrupt in the ISR, which will prevent it from spinning. This won't break anything because the s/w interrupt is used as a one-shot interrupt. Note that this is a minimal fix, overlooking many possible cleanups, e.g.: - lan743x_intr_software_isr() is completely redundant and reads INT_STS twice for no apparent reason - disabling the s/w interrupt in lan743x_intr_test_isr() is now redundant, but harmless - waiting on software_isr_flag can be converted from a sleeping poll loop to wait_event_timeout() Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Tested-by: Sven Van Asbroeck <thesven73@gmail.com> # arm imx6 lan7430 Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Link: https://lore.kernel.org/r/20201112204741.12375-1-TheSven73@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-14lan743x: fix issue causing intermittent kernel log warningsSven Van Asbroeck
When running this chip on arm imx6, we intermittently observe the following kernel warning in the log, especially when the system is under high load: [ 50.119484] ------------[ cut here ]------------ [ 50.124377] WARNING: CPU: 0 PID: 303 at kernel/softirq.c:169 __local_bh_enable_ip+0x100/0x184 [ 50.132925] IRQs not enabled as expected [ 50.159250] CPU: 0 PID: 303 Comm: rngd Not tainted 5.7.8 #1 [ 50.164837] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 50.171395] [<c0111a38>] (unwind_backtrace) from [<c010be28>] (show_stack+0x10/0x14) [ 50.179162] [<c010be28>] (show_stack) from [<c05b9dec>] (dump_stack+0xac/0xd8) [ 50.186408] [<c05b9dec>] (dump_stack) from [<c0122e40>] (__warn+0xd0/0x10c) [ 50.193391] [<c0122e40>] (__warn) from [<c0123238>] (warn_slowpath_fmt+0x98/0xc4) [ 50.200892] [<c0123238>] (warn_slowpath_fmt) from [<c012b010>] (__local_bh_enable_ip+0x100/0x184) [ 50.209860] [<c012b010>] (__local_bh_enable_ip) from [<bf09ecbc>] (destroy_conntrack+0x48/0xd8 [nf_conntrack]) [ 50.220038] [<bf09ecbc>] (destroy_conntrack [nf_conntrack]) from [<c0ac9b58>] (nf_conntrack_destroy+0x94/0x168) [ 50.230160] [<c0ac9b58>] (nf_conntrack_destroy) from [<c0a4aaa0>] (skb_release_head_state+0xa0/0xd0) [ 50.239314] [<c0a4aaa0>] (skb_release_head_state) from [<c0a4aadc>] (skb_release_all+0xc/0x24) [ 50.247946] [<c0a4aadc>] (skb_release_all) from [<c0a4b4cc>] (consume_skb+0x74/0x17c) [ 50.255796] [<c0a4b4cc>] (consume_skb) from [<c081a2dc>] (lan743x_tx_release_desc+0x120/0x124) [ 50.264428] [<c081a2dc>] (lan743x_tx_release_desc) from [<c081a98c>] (lan743x_tx_napi_poll+0x5c/0x18c) [ 50.273755] [<c081a98c>] (lan743x_tx_napi_poll) from [<c0a6b050>] (net_rx_action+0x118/0x4a4) [ 50.282306] [<c0a6b050>] (net_rx_action) from [<c0101364>] (__do_softirq+0x13c/0x53c) [ 50.290157] [<c0101364>] (__do_softirq) from [<c012b29c>] (irq_exit+0x150/0x17c) [ 50.297575] [<c012b29c>] (irq_exit) from [<c0196a08>] (__handle_domain_irq+0x60/0xb0) [ 50.305423] [<c0196a08>] (__handle_domain_irq) from [<c05d44fc>] (gic_handle_irq+0x4c/0x90) [ 50.313790] [<c05d44fc>] (gic_handle_irq) from [<c0100ed4>] (__irq_usr+0x54/0x80) [ 50.321287] Exception stack(0xecd99fb0 to 0xecd99ff8) [ 50.326355] 9fa0: 1cf1aa74 00000001 00000001 00000000 [ 50.334547] 9fc0: 00000001 00000000 00000000 00000000 00000000 00000000 00004097 b6d17d14 [ 50.342738] 9fe0: 00000001 b6d17c60 00000000 b6e71f94 800b0010 ffffffff [ 50.349364] irq event stamp: 2525027 [ 50.352955] hardirqs last enabled at (2525026): [<c0a6afec>] net_rx_action+0xb4/0x4a4 [ 50.360892] hardirqs last disabled at (2525027): [<c0d6d2fc>] _raw_spin_lock_irqsave+0x1c/0x50 [ 50.369517] softirqs last enabled at (2524660): [<c01015b4>] __do_softirq+0x38c/0x53c [ 50.377446] softirqs last disabled at (2524693): [<c012b29c>] irq_exit+0x150/0x17c [ 50.385027] ---[ end trace c0b571db4bc8087d ]--- The driver is calling dev_kfree_skb() from code inside a spinlock, where h/w interrupts are disabled. This is forbidden, as documented in include/linux/netdevice.h. The correct function to use dev_kfree_skb_irq(), or dev_kfree_skb_any(). Fix by using the correct dev_kfree_skb_xxx() functions: in lan743x_tx_release_desc(): called by lan743x_tx_release_completed_descriptors() called by in lan743x_tx_napi_poll() which holds a spinlock called by lan743x_tx_release_all_descriptors() called by lan743x_tx_close() which can-sleep conclusion: use dev_kfree_skb_any() in lan743x_tx_xmit_frame(): which holds a spinlock conclusion: use dev_kfree_skb_irq() in lan743x_tx_close(): which can-sleep conclusion: use dev_kfree_skb() in lan743x_rx_release_ring_element(): called by lan743x_rx_close() which can-sleep called by lan743x_rx_open() which can-sleep conclusion: use dev_kfree_skb() Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Link: https://lore.kernel.org/r/20201112185949.11315-1-TheSven73@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12Merge https://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12lan743x: fix use of uninitialized variableSven Van Asbroeck
When no devicetree is present, the driver will use an uninitialized variable. Fix by initializing this variable. Fixes: 902a66e08cea ("lan743x: correctly handle chips with internal PHY") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Link: https://lore.kernel.org/r/20201112152513.1941-1-TheSven73@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-10lan743x: fix "BUG: invalid wait context" when setting rx modeSven Van Asbroeck
In the net core, the struct net_device_ops -> ndo_set_rx_mode() callback is called with the dev->addr_list_lock spinlock held. However, this driver's ndo_set_rx_mode callback eventually calls lan743x_dp_write(), which acquires a mutex. Mutex acquisition may sleep, and this is not allowed when holding a spinlock. Fix by removing the dp_lock mutex entirely. Its purpose is to prevent concurrent accesses to the data port. No concurrent accesses are possible, because the dev->addr_list_lock spinlock in the core only lets through one thread at a time. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Link: https://lore.kernel.org/r/20201109203828.5115-1-TheSven73@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-10lan743x: correctly handle chips with internal PHYSven Van Asbroeck
Commit 6f197fb63850 ("lan743x: Added fixed link and RGMII support") assumes that chips with an internal PHY will never have a devicetree entry. This is incorrect: even for these chips, a devicetree entry can be useful e.g. to pass the mac address from bootloader to chip: &pcie { status = "okay"; host@0 { reg = <0 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; lan7430: ethernet@0 { /* LAN7430 with internal PHY */ compatible = "microchip,lan743x"; status = "okay"; reg = <0 0 0 0 0>; /* filled in by bootloader */ local-mac-address = [00 00 00 00 00 00]; }; }; }; If a devicetree entry is present, the driver will not attach the chip to its internal phy, and the chip will be non-operational. Fix by tweaking the phy connection algorithm: - first try to connect to a phy specified in the devicetree (could be 'real' phy, or just a 'fixed-link') - if that doesn't succeed, try to connect to an internal phy, even if the chip has a devnode Tested on a LAN7430 with internal PHY. I cannot test a device using fixed-link, as I do not have access to one. Fixes: 6f197fb63850 ("lan743x: Added fixed link and RGMII support") Tested-by: Sven Van Asbroeck <thesven73@gmail.com> # lan7430 Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Link: https://lore.kernel.org/r/20201108171224.23829-1-TheSven73@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-27net: microchip: Remove unneeded variable retXu Wang
Remove unneeded variable ret used to store return value. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Link: https://lore.kernel.org/r/20201023092107.28065-1-vulab@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-25drivers/net/ethernet: clean up unused assignmentsJesse Brandeburg
As part of the W=1 compliation series, these lines all created warnings about unused variables that were assigned a value. Most of them are from register reads, but some are just picking up a return value from a function and never doing anything with it. Fixed warnings: .../ethernet/brocade/bna/bnad.c:3280:6: warning: variable ‘rx_count’ set but not used [-Wunused-but-set-variable] .../ethernet/brocade/bna/bnad.c:3280:6: warning: variable ‘rx_count’ set but not used [-Wunused-but-set-variable] .../ethernet/cortina/gemini.c:512:6: warning: variable ‘val’ set but not used [-Wunused-but-set-variable] .../ethernet/cortina/gemini.c:2110:21: warning: variable ‘config0’ set but not used [-Wunused-but-set-variable] .../ethernet/cavium/liquidio/octeon_device.c:1327:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable] .../ethernet/cavium/liquidio/octeon_device.c:1358:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable] .../ethernet/dec/tulip/media.c:322:8: warning: variable ‘setup’ set but not used [-Wunused-but-set-variable] .../ethernet/dec/tulip/de4x5.c:4928:13: warning: variable ‘r3’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:4981:6: warning: variable ‘rx_status’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:6510:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:6087: warning: cannot understand function prototype: 'struct hw_regs ' .../ethernet/microchip/lan743x_main.c:161:6: warning: variable ‘int_en’ set but not used [-Wunused-but-set-variable] .../ethernet/microchip/lan743x_main.c:1702:6: warning: variable ‘int_sts’ set but not used [-Wunused-but-set-variable] .../ethernet/microchip/lan743x_main.c:3041:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] .../ethernet/natsemi/ns83820.c:603:6: warning: variable ‘tbisr’ set but not used [-Wunused-but-set-variable] .../ethernet/natsemi/ns83820.c:1207:11: warning: variable ‘tanar’ set but not used [-Wunused-but-set-variable] .../ethernet/marvell/mvneta.c:754:6: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:33:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:160:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:490:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:2378:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable] .../ethernet/packetengines/yellowfin.c:1063:18: warning: variable ‘yf_size’ set but not used [-Wunused-but-set-variable] .../ethernet/realtek/8139cp.c:1242:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] .../ethernet/mellanox/mlx4/en_tx.c:858:6: warning: variable ‘ring_cons’ set but not used [-Wunused-but-set-variable] .../ethernet/sis/sis900.c:792:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:878:11: warning: variable ‘rx_ev_pkt_type’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:877:23: warning: variable ‘rx_ev_mcast_pkt’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:877:7: warning: variable ‘rx_ev_hdr_type’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:876:7: warning: variable ‘rx_ev_other_err’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:1646:21: warning: variable ‘buftbl_min’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:2535:32: warning: variable ‘spec’ set but not used [-Wunused-but-set-variable] .../ethernet/via/via-velocity.c:880:6: warning: variable ‘curr_status’ set but not used [-Wunused-but-set-variable] .../ethernet/ti/tlan.c:656:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] .../ethernet/ti/davinci_emac.c:1230:6: warning: variable ‘num_tx_pkts’ set but not used [-Wunused-but-set-variable] .../ethernet/synopsys/dwc-xlgmac-common.c:516:8: warning: variable ‘str’ set but not used [-Wunused-but-set-variable] .../ethernet/ti/cpsw_new.c:1662:22: warning: variable ‘priv’ set but not used [-Wunused-but-set-variable] The register reads should be OK, because the current implementation of readl and friends will always execute even without an lvalue. When it makes sense, just remove the lvalue assignment and the local. Other times, just remove the offending code, and occasionally, just mark the variable as maybe unused since it could be used in an ifdef or debug scenario. Only compile tested with W=1. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23net: microchip: Make `lan743x_pm_suspend` function return right valueZheng Yongjun
drivers/net/ethernet/microchip/lan743x_main.c: In function lan743x_pm_suspend: `ret` is set but not used. In fact, `pci_prepare_to_sleep` function value should be the right value of `lan743x_pm_suspend` function, therefore, fix it. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22lan743x: remove redundant initialization of variable current_head_indexColin Ian King
The variable current_head_index is being initialized with a value that is never read and it is being updated later with a new value. Replace the initialization of -1 with the latter assignment. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14lan743x: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GPF_ with a correct flag. It has been compile tested. When memory is allocated in 'lan743x_tx_ring_cleanup()' and 'lan743x_rx_ring_init()', GFP_KERNEL can be used because this flag is already used to allocate some memory in these functions. While at it, remove a useless (void *) casting in the first hunk in so that the code is more consistent. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-24lan743x: Remove duplicated include from lan743x_main.cYueHaibing
Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18lan743x: allow mac address to come from dtTim Harvey
If a valid mac address is present in dt, use that before using CSR's or a random mac address. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-16lan743x: add MODULE_DEVICE_TABLE for module loading aliasTim Harvey
Without a MODULE_DEVICE_TABLE the attributes are missing that create an alias for auto-loading the module in userspace via hotplug. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-23 22:20:45 +0000