summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mac80211_hwsim.c
AgeCommit message (Collapse)Author
2022-07-22wifi: mac80211_hwsim: handle links for wmediumd/virtioJohannes Berg
For wmediumd/virtio, handle both the RX channel for links, as well as the link addresses when links are added/removed. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-22wifi: mac80211_hwsim: fix address translation for MLOJohannes Berg
There are two issues here: we need to do the translation even in case mac80211 selected a link, and we should only translate the A3 if it's the BSSID. Fix both. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211_hwsim: fix TX link selectionJohannes Berg
Now that we have a pointer to the TX STA even when it's not authenticated/... yet, fix the TX link selection in hwsim to select only among the valid links for the STA, requiring a STA pointer here. Also implement a simple round-robin between links to make life more interesting. While at it, also consider A3 when translating to link addresses. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211_hwsim: use MLO link ID for TXAndrei Otcheretianski
Use the link ID provided in TX frame metadata to select the correct channel. For now, always select the link with the lowest link ID and do some address translation. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211_hwsim: do rc update per linkAndrei Otcheretianski
Make mac80211_hwsim_sta_rc_update() iterate over all the STA links. This is somewhat temporary, we really should add the link to the API, but then hwsim still calls it internally and would need this. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211_hwsim: implement sta_state for MLOJohannes Berg
In MLO, we need to transmit to another MLD and select the link to it, which requires knowing the station. But in TX, mac80211 will not give us a station that's not added to the driver, which in the older add/remove API is only done later. Implement the new API in MLO so we know about the STA at all times and get a pointer during TX as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: remove link_id parameter from link_info_changed()Gregory Greenman
Since struct ieee80211_bss_conf already contains link_id, passing link_id is not necessary. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: replace link_id with link_conf in ↵Gregory Greenman
switch/(un)assign_vif_chanctx() Since mac80211 already has a protected pointer to link_conf, pass it to the driver to avoid additional RCU locking. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: change QoS settings API to take link into accountJohannes Berg
Take the link into account in the QoS settings (EDCA parameters) APIs. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: Align with Draft P802.11be_D2.0Ilan Peer
Align the mac80211 implementation with P802.11be_D2.0. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211_hwsim: Ack link addressed framesAndrei Otcheretianski
Do address matching with link addresses as well. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: RCU-ify link/link_conf pointersJohannes Berg
Since links can be added and removed dynamically, we need to somehow protect the sdata->link[] and vif->link_conf[] array pointers from disappearing when accessing them without locks. RCU-ify the pointers to achieve this, which requires quite a bit of rework. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211_hwsim: Support link channel matching on rxAndrei Otcheretianski
Accept frames from all the links' channels. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211_hwsim: use 32-bit skb cookieJohannes Berg
We won't really have enough skbs to need a 64-bit cookie, and on 32-bit platforms storing the 64-bit cookie into the void *rate_driver_data doesn't work anyway. Switch back to using just a 32-bit cookie and uintptr_t for the type to avoid compiler warnings about all this. Fixes: 4ee186fa7e40 ("wifi: mac80211_hwsim: fix race condition in pending packet") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
include/net/sock.h 310731e2f161 ("net: Fix data-races around sysctl_mem.") e70f3c701276 ("Revert "net: set SK_MEM_QUANTUM to 4096"") https://lore.kernel.org/all/20220711120211.7c8b7cba@canb.auug.org.au/ net/ipv4/fib_semantics.c 747c14307214 ("ip: fix dflt addr selection for connected nexthop") d62607c3fe45 ("net: rename reference+tracking helpers") net/tls/tls.h include/net/tls.h 3d8c51b25a23 ("net/tls: Check for errors in tls_device_init") 587903142308 ("tls: create an internal header") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-11wifi: mac80211_hwsim: add back erroneously removed castJohannes Berg
The robots report that we're now casting to a differently sized integer, which is correct, and the previous patch had erroneously removed it. Reported-by: kernel test robot <lkp@intel.com> Fixes: 4ee186fa7e40 ("wifi: mac80211_hwsim: fix race condition in pending packet") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-11wifi: mac80211_hwsim: fix race condition in pending packetJeongik Cha
A pending packet uses a cookie as an unique key, but it can be duplicated because it didn't use atomic operators. And also, a pending packet can be null in hwsim_tx_info_frame_received_nl due to race condition with mac80211_hwsim_stop. For this, * Use an atomic type and operator for a cookie * Add a lock around the loop for pending packets Signed-off-by: Jeongik Cha <jeongik@google.com> Link: https://lore.kernel.org/r/20220704084354.3556326-1-jeongik@google.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-29wifi: mac80211_hwsim: set virtio device ready in probe()Johannes Berg
Just like a similar commit to arch/um/drivers/virt-pci.c, call virtio_device_ready() to make this driver work after commit b4ec69d7e09 ("virtio: harden vring IRQ"), since the driver uses the virtqueues in the probe function. (The virtio core sets the device ready when probe returns.) Fixes: 8b4ec69d7e09 ("virtio: harden vring IRQ") Fixes: 5d44fe7c9808 ("mac80211_hwsim: add frame transmission support over virtio") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20220613210401.327958-1-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211_hwsim: print the link idShaul Triebitz
Print the link ID in link_info_changed function. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211_hwsim: support creating MLO-capable radiosJohannes Berg
Add initial support to hwsim for creating MLO-capable radios dynamically (and statically via module parameter, but that's not really recommended.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211_hwsim: send a beacon per linkShaul Triebitz
Add to hwsim a link_data structure. For now, move the beacon interval and beacon timer to the link_data structure (making them per link). Set a beacon timer for each link and transmit a per link beacon (pass the link_id to ieee80211_beacon_get). Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: return a beacon for a specific linkShaul Triebitz
Pass the link id through to the get_beacon and return the beacon for a specific link id. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211_hwsim: split bss_info_changed to vif/link info_changedShaul Triebitz
Replace the bss_info_changed callback with vif_cfg_changed and link_info_changed callbacks (for vif changes and link changes). Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: make channel context code MLO-awareJohannes Berg
Make the channel context code MLO aware, along with some functions that it uses, so that the chan.c file is now MLD-clean and no longer uses deflink/bss_conf/etc. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: split bss_info_changed methodJohannes Berg
Split the bss_info_changed method to vif_cfg_changed and link_info_changed, with the latter getting a link ID. Also change the 'changed' parameter to u64 already, we know we need that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: move interface config to new structJohannes Berg
We'll use bss_conf for per-link configuration later, so move out all the non-link-specific data out into a new struct ieee80211_vif_cfg used in the vif. Some adjustments were done with the following spatch: @@ expression sdata; struct ieee80211_vif *vifp; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ ( -sdata->vif.bss_conf.var +sdata->vif.cfg.var | -vifp->bss_conf.var +vifp->cfg.var ) @bss_conf@ struct ieee80211_bss_conf *bss_conf; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ -bss_conf->var +vif_cfg->var (though more manual fixups were needed, e.g. replacing "vif_cfg->" by "vif->cfg." in many files.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: move some future per-link data to bss_confJohannes Berg
To add MLD, reuse the bss_conf structure later for per-link information, so move some things into it that are per link. Most transformations were done with the following spatch: @@ expression sdata; identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color }; @@ -sdata->vif.var +sdata->vif.bss_conf.var @@ struct ieee80211_vif *vif; identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color }; @@ -vif->var +vif->bss_conf.var Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-10wifi: mac80211_hwsim: Directly use ida_alloc()/free()Ke Liu
Use ida_alloc()/ida_free() instead of deprecated ida_simple_get()/ida_simple_remove(). Signed-off-by: Ke Liu <liuke94@huawei.com> Link: https://lore.kernel.org/r/20220528093140.1573816-1-liuke94@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Build issue in drivers/net/ethernet/sfc/ptp.c 54fccfdd7c66 ("sfc: efx_default_channel_type APIs can be static") 49e6123c65da ("net: sfc: fix memory leak due to ptp channel") https://lore.kernel.org/all/20220510130556.52598fe2@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-09mac80211_hwsim: call ieee80211_tx_prepare_skb under RCU protectionJohannes Berg
This is needed since it might use (and pass out) pointers to e.g. keys protected by RCU. Can't really happen here as the frames aren't encrypted, but we need to still adhere to the rules. Fixes: cacfddf82baf ("mac80211_hwsim: initialize ieee80211_tx_info at hw_scan_work") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20220505230421.5f139f9de173.I77ae111a28f7c0e9fd1ebcee7f39dbec5c606770@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-09mac80211_hwsim: fix RCU protected chanctx accessJohannes Berg
We need to RCU protect the chanctx_conf access, so do that. Fixes: 585625c955b1 ("mac80211_hwsim: check TX and STA bandwidth") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20220505230421.fb8055c081a2.Ic6da3307c77a909bd61a0ea25dc2a4b08fe1b03f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-04-11mac80211: prepare sta handling for MLO supportSriram R
Currently in mac80211 each STA object is represented using sta_info datastructure with the associated STA specific information and drivers access ieee80211_sta part of it. With MLO (Multi Link Operation) support being added in 802.11be standard, though the association is logically with a single Multi Link capable STA, at the physical level communication can happen via different advertised links (uniquely identified by Channel, operating class, BSSID) and hence the need to handle multiple link STA parameters within a composite sta_info object called the MLD STA. The different link STA part of MLD STA are identified using the link address which can be same or different as the MLD STA address and unique link id based on the link vif. To support extension of such a model, the sta_info datastructure is modified to hold multiple link STA objects with link specific params currently within sta_info moved to this new structure. Similarly this is done for ieee80211_sta as well which will be accessed within mac80211 as well as by drivers, hence trivial driver changes are expected to support this. For current non MLO supported drivers, only one link STA is present and link information is accessed via 'deflink' member. For MLO drivers, we still need to define the APIs etc. to get the correct link ID and access the correct part of the station info. Currently in mac80211, all link STA info are accessed directly via deflink. These will be updated to access via link pointers indexed by link id with MLO support patches, with link id being 0 for non MLO supported cases. Except for couple of macro related changes, below spatch takes care of updating mac80211 and driver code to access to the link STA info via deflink. @ieee80211_sta@ struct ieee80211_sta *s; struct sta_info *si; identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr}; @@ ( s-> - var + deflink.var | si->sta. - var + deflink.var ) @sta_info@ struct sta_info *si; identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth}; @@ ( si-> - var + deflink.var ) Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com [remove MLO-drivers notes from commit message, not clear yet; run spatch] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-11Merge tag 'wireless-next-2022-03-11' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== brcmfmac * add BCM43454/6 support rtw89 * add support for 160 MHz channels and 6 GHz band * hardware scan support iwlwifi * support UHB TAS enablement via BIOS * remove a bunch of W=1 warnings * add support for channel switch offload * support 32 Rx AMPDU sessions in newer devices * add support for a couple of new devices * add support for band disablement via BIOS mt76 * mt7915 thermal management improvements * SAR support for more mt76 drivers * mt7986 wmac support on mt7915 ath11k * debugfs interface to configure firmware debug log level * debugfs interface to test Target Wake Time (TWT) * provide 802.11ax High Efficiency (HE) data via radiotap ath9k * use hw_random API instead of directly dumping into random.c wcn36xx * fix wcn3660 to work on 5 GHz band ath6kl * add device ID for WLU5150-D81 cfg80211/mac80211 * initial EHT (from 802.11be) support (EHT rates, 320 MHz, larger block-ack) * support disconnect on HW restart * tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (247 commits) mac80211: Add support to trigger sta disconnect on hardware restart mac80211: fix potential double free on mesh join mac80211: correct legacy rates check in ieee80211_calc_rx_airtime nl80211: fix typo of NL80211_IF_TYPE_OCB in documentation mac80211: Use GFP_KERNEL instead of GFP_ATOMIC when possible mac80211: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE rtw89: 8852c: process logic efuse map rtw89: 8852c: process efuse of phycap rtw89: support DAV efuse reading operation rtw89: 8852c: add chip::dle_mem rtw89: add page_regs to handle v1 chips rtw89: add chip_info::{h2c,c2h}_reg to support more chips rtw89: add hci_func_en_addr to support variant generation rtw89: add power_{on/off}_func rtw89: read chip version depends on chip ID rtw89: pci: use a struct to describe all registers address related to DMA channel rtw89: pci: add V1 of PCI channel address rtw89: pci: add struct rtw89_pci_info rtw89: 8852c: add 8852c empty files MAINTAINERS: add devicetree bindings entry for mt76 ... ==================== Link: https://lore.kernel.org/r/20220311124029.213470-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-11mac80211: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTEYihao Han
Fix the following coccicheck warning: ./drivers/net/wireless/mac80211_hwsim.c:1040:0-23: WARNING: hwsim_fops_rx_rssi should be defined with DEFINE_DEBUGFS_ATTRIBUTE Signed-off-by: Yihao Han <hanyihao@vivo.com> Link: https://lore.kernel.org/r/20220218070228.6210-1-hanyihao@vivo.com [fix indentation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16mac80211_hwsim: Advertise support for EHT capabilitiesIlan Peer
Add EHT capabilities to bands. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Link: https://lore.kernel.org/r/20220214173004.1b710f8e04ce.I11d6911dafc01deb8ceb7828e363e8554701790a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16mac80211: Add initial support for EHT and 320 MHz channelsIlan Peer
Add initial support for EHT and 320 MHz bandwidth in mac80211. As a new IEEE80211_STA_RX_BW_320 is added to enum ieee80211_sta_rx_bandwidth, update the drivers to avoid compilation warnings. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Link: https://lore.kernel.org/r/20220214173004.0f144cc0bba6.Iad18111264da87eed5fd7b017f0cc6e58c604e07@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16cfg80211: Add support for EHT 320 MHz channel widthJia Ding
Add 320 MHz support in the channel def and center frequency validation with compatible check. Signed-off-by: Jia Ding <quic_jiad@quicinc.com> Co-authored-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-authored-by: Muna Sinada <quic_msinada@quicinc.com> Signed-off-by: Muna Sinada <quic_msinada@quicinc.com> Co-authored-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/1640163883-12696-5-git-send-email-quic_vjakkam@quicinc.com Link: https://lore.kernel.org/r/20220214163009.175289-1-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16mac80211_hwsim: Add custom regulatory for 6GHzIlan Peer
Add a custom regulatory domain for testing 6 GHz, including 320 MHz bandwidth. This can be used before the regulatory databases are all updated etc. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Link: https://lore.kernel.org/r/20220214173004.e3d6faf1f35f.I9507395b64496d96a2276ba8c1e1323e54407aa7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16mac80211_hwsim: don't shadow a global variableJohannes Berg
The argument to hwsim_init_s1g_channels() shadows a global, change that to be clearer. Link: https://lore.kernel.org/r/20220214173004.66bac90d64a8.I3e878e42bf2feecbb0a6ca38a68c236c23a8c9e6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16mac80211_hwsim: check TX and STA bandwidthJohannes Berg
Add checks to hwsim to validate that neither TX nor any station's configured bandwidth can exceed the channel (context) configuration previously requested. Link: https://lore.kernel.org/r/20220214173004.9fd154d2c3c2.Ia0cd152357a373149bab017d479ab7d5ded289c0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16mac80211_hwsim: Add debugfs to control rx status RSSIBeni Lev
Set the base RSSI of a TX frame. The final RSSI of the frame will be the base RSSI + the radio's TX power Signed-off-by: Beni Lev <beni.lev@intel.com> Link: https://lore.kernel.org/r/20220210201649.dddebbb55a7f.I6c0607694587b577070339078829fcc20dfcfe2c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-01-31mac80211_hwsim: initialize ieee80211_tx_info at hw_scan_workJaeMan Park
In mac80211_hwsim, the probe_req frame is created and sent while scanning. It is sent with ieee80211_tx_info which is not initialized. Uninitialized ieee80211_tx_info can cause problems when using mac80211_hwsim with wmediumd. wmediumd checks the tx_rates field of ieee80211_tx_info and doesn't relay probe_req frame to other clients even if it is a broadcasting message. Call ieee80211_tx_prepare_skb() to initialize ieee80211_tx_info for the probe_req that is created by hw_scan_work in mac80211_hwsim. Signed-off-by: JaeMan Park <jaeman@google.com> Link: https://lore.kernel.org/r/20220113060235.546107-1-jaeman@google.com [fix memory leak] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-01-31mac80211_hwsim: report NOACK frames in tx_statusBenjamin Beichler
Add IEEE80211_TX_STAT_NOACK_TRANSMITTED to tx_status flags to have proper statistics for non-acked frames. Signed-off-by: Benjamin Beichler <benjamin.beichler@uni-rostock.de> Link: https://lore.kernel.org/r/20220111221327.1499881-1-benjamin.beichler@uni-rostock.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-01-18Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: "virtio,vdpa,qemu_fw_cfg: features, cleanups, and fixes. - partial support for < MAX_ORDER - 1 granularity for virtio-mem - driver_override for vdpa - sysfs ABI documentation for vdpa - multiqueue config support for mlx5 vdpa - and misc fixes, cleanups" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (42 commits) vdpa/mlx5: Fix tracking of current number of VQs vdpa/mlx5: Fix is_index_valid() to refer to features vdpa: Protect vdpa reset with cf_mutex vdpa: Avoid taking cf_mutex lock on get status vdpa/vdpa_sim_net: Report max device capabilities vdpa: Use BIT_ULL for bit operations vdpa/vdpa_sim: Configure max supported virtqueues vdpa/mlx5: Report max device capabilities vdpa: Support reporting max device capabilities vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps() vdpa: Add support for returning device configuration information vdpa/mlx5: Support configuring max data virtqueue vdpa/mlx5: Fix config_attr_mask assignment vdpa: Allow to configure max data virtqueues vdpa: Read device configuration only if FEATURES_OK vdpa: Sync calls set/get config/status with cf_mutex vdpa/mlx5: Distribute RX virtqueues in RQT object vdpa: Provide interface to read driver features vdpa: clean up get_config_size ret value handling virtio_ring: mark ring unused on error ...
2022-01-14virtio: wrap config->reset callsMichael S. Tsirkin
This will enable cleanups down the road. The idea is to disable cbs, then add "flush_queued_cbs" callback as a parameter, this way drivers can flush any work queued after callbacks have been disabled. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20211013105226.20225-1-mst@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-19mac80211_hwsim: Fix spelling mistake "Droping" -> "Dropping"Colin Ian King
There is a spelling mistake in a comment, fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20211026094000.209463-1-colin.i.king@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-22Merge tag 'mac80211-next-for-net-next-2021-10-21' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Quite a few changes: * the applicable eth_hw_addr_set() and const hw_addr changes * various code cleanups/refactorings * stack usage reductions across the wireless stack * some unstructured find_ie() -> structured find_element() changes * a few more pieces of multi-BSSID support * some 6 GHz regulatory support * 6 GHz support in hwsim, for testing userspace code * Light Communications (LC, 802.11bb) early band definitions to be able to add a first driver soon * tag 'mac80211-next-for-net-next-2021-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: (35 commits) cfg80211: fix kernel-doc for MBSSID EMA mac80211: Prevent AP probing during suspend nl80211: Add LC placeholder band definition to nl80211_band ... ==================== Link: https://lore.kernel.org/r/20211021154953.134849-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-21wireless: mac80211_hwsim: use eth_hw_addr_set()Jakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20211018235021.1279697-12-kuba@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-09-24mac80211_hwsim: enable 6GHz channelsRamon Fontes
Advertise 6 GHz channels with HE (and without HT/VHT) capabilities. Signed-off-by: Ramon Fontes <ramonreisfontes@gmail.com> Link: https://lore.kernel.org/r/20210923182805.27122-1-ramonreisfontes@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-09-23mac80211-hwsim: fix late beacon hrtimer handlingJohannes Berg
Thomas explained in https://lore.kernel.org/r/87mtoeb4hb.ffs@tglx that our handling of the hrtimer here is wrong: If the timer fires late (e.g. due to vCPU scheduling, as reported by Dmitry/syzbot) then it tries to actually rearm the timer at the next deadline, which might be in the past already: 1 2 3 N N+1 | | | ... | | ^ intended to fire here (1) ^ next deadline here (2) ^ actually fired here The next time it fires, it's later, but will still try to schedule for the next deadline (now 3), etc. until it catches up with N, but that might take a long time, causing stalls etc. Now, all of this is simulation, so we just have to fix it, but note that the behaviour is wrong even per spec, since there's no value then in sending all those beacons unaligned - they should be aligned to the TBTT (1, 2, 3, ... in the picture), and if we're a bit (or a lot) late, then just resume at that point. Therefore, change the code to use hrtimer_forward_now() which will ensure that the next firing of the timer would be at N+1 (in the picture), i.e. the next interval point after the current time. Suggested-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: syzbot+0e964fad69a9c462bc1e@syzkaller.appspotmail.com Fixes: 01e59e467ecf ("mac80211_hwsim: hrtimer beacon") Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210915112936.544f383472eb.I3f9712009027aa09244b65399bf18bf482a8c4f1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-26 18:15:54 +0000