summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/microchip/wilc1000/netdev.c
AgeCommit message (Collapse)Author
2022-07-27wifi: wilc1000: use existing iftype variable to store the interface typeAjay Singh
For consistency, use an existing 'iftype' element which was already having the interface type. Replace 'mode' with 'iftype' as it was used for the same purpose. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220720160302.231516-8-ajay.kathat@microchip.com
2022-07-27wifi: wilc1000: cancel the connect operation during interface downAjay Singh
Cancel the ongoing connection request to avoid any issue if the interface is set down before the connection request is completed. host_int_handle_disconnect was already available, so renamed it and used the same API for 'ndio_close' cb. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220720160302.231516-6-ajay.kathat@microchip.com
2022-07-27wifi: wilc1000: set correct value of 'close' variable in failure caseAjay Singh
Set 'close' variable to '1' to indicate closing operation when initialisation fails during wlan_initialize_threads() call. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220720160302.231516-3-ajay.kathat@microchip.com
2022-05-30wifi: wilc1000: add WPA3 SAE supportAjay Singh
Enable SAE authentication for AP and STA mode. In STA mode, allow the driver to pass the auth frames which are received from firmware to userspace application(hostapd) so that SAE authentication is offloaded to userspace. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220524120606.9675-3-ajay.kathat@microchip.com
2022-05-11wilc1000: increase firmware version array sizeAjay Singh
Increase firmware version array size to hold complete version information. The firmware commit id(Build:) information is also part of the firmware version string. Firmware version format: WILC_WIFI_FW_REL_XX_XX Build: XXXXX e.g. WILC_WIFI_FW_REL_15_6 Build: 12804 Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220504161924.2146601-1-ajay.kathat@microchip.com
2021-12-20wilc1000: fix double free error in probe()Dan Carpenter
Smatch complains that there is a double free in probe: drivers/net/wireless/microchip/wilc1000/spi.c:186 wilc_bus_probe() error: double free of 'spi_priv' drivers/net/wireless/microchip/wilc1000/sdio.c:163 wilc_sdio_probe() error: double free of 'sdio_priv' The problem is that wilc_netdev_cleanup() function frees "wilc->bus_data". That's confusing and a layering violation. Leave the frees in probe(), delete the free in wilc_netdev_cleanup(), and add some new frees to the remove() functions. Fixes: dc8b338f3bcd ("wilc1000: use goto labels on error path") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211217150311.GC16611@kili
2021-12-14wilc1000: Rename workqueue from "WILC_wq" to "NETDEV-wq"David Mosberger-Tang
This follows normal Linux convention and is more useful since the new name will make it apparent which network device the work-queue is for (e.g., the name will be "wlan0-wq" for network device "wlan0"). hif_workqueue allocation has to move from cfg80211.c:wilc_cfg80211_init() to netdev.c:wilc_netdev_ifc_init() because the network device name is not known until after the netdev is registered. The move also makes sense because netdev.c is already responsible for destroying the work queue when it is no longer needed. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211209044411.3482259-5-davidm@egauge.net
2021-12-14wilc1000: Rename tx task from "K_TXQ_TASK" to NETDEV-txDavid Mosberger-Tang
This follows normal Linux conventions and is also more useful because the netdevice name is part of the task name (e.g., "wlan0-tx" for network device "wlan0"). Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211209044411.3482259-4-davidm@egauge.net
2021-12-14wilc1000: Rename irq handler from "WILC_IRQ" to netdev nameDavid Mosberger-Tang
This change follows normal Linux convention and the new name is more useful since it'll be clear which irq handler statistics correspond to which net device. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211209044411.3482259-3-davidm@egauge.net
2021-12-14wilc1000: Fix missing newline in error messageDavid Mosberger-Tang
Add missing newline in pr_err() message. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211206232709.3192856-3-davidm@egauge.net
2021-11-19wilc1000: copy address before calling wilc_set_mac_addressJakub Kicinski
wilc_set_mac_address() calls IO routines which don't guarantee the pointer won't be written to. Make a copy. Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20wilc1000: use eth_hw_addr_set()Jakub Kicinski
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20211018235021.1279697-13-kuba@kernel.org
2021-10-13wireless: Remove redundant 'flush_workqueue()' callsChristophe JAILLET
'destroy_workqueue()' already drains the queue before destroying it, so there is no need to flush it explicitly. Remove the redundant 'flush_workqueue()' calls. This was generated with coccinelle: @@ expression E; @@ - flush_workqueue(E); destroy_workqueue(E); Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/0855d51423578ad019c0264dad3fe47a2e8af9c7.1633849511.git.christophe.jaillet@wanadoo.fr
2021-04-17wilc1000: Bring MAC address setting in line with typical Linux behaviorDavid Mosberger-Tang
Linux network drivers normally disallow changing the MAC address when the interface is up. This driver has been different in that it allows to change the MAC address *only* when it's up. This patch brings wilc1000 behavior more in line with other network drivers. We could have replaced wilc_set_mac_addr() with eth_mac_addr() but that would break existing documentation on how to change the MAC address. Likewise, return -EADDRNOTAVAIL (not -EINVAL) when the specified MAC address is invalid or unavailable. Signed-off-by: David Mosberger-Tang <davidm@egauge.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210303194846.1823596-1-davidm@egauge.net
2021-03-15wilc1000: use wilc handler as cookie in request_threaded_irq()Ajay Singh
Use same cookie for request_threaded_irq() & free_irq() to properly free IRQ during module unload. free_irq() already uses *wilc* handler so the changes are required for request_threaded_irq(). Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210225042302.17048-1-ajay.kathat@microchip.com
2021-02-11wilc1000: Fix use of void pointer as a wrong struct typeVsevolod Kozlov
ac_classify() expects a struct sk_buff* as its second argument, which is a member of struct tx_complete_data. priv happens to be a pointer to struct tx_complete_data, so passing it directly to ac_classify() leads to wrong behaviour and occasional panics. Since there is only one caller of wilc_wlan_txq_add_net_pkt and it already knows the type behind this pointer, and the structure is already in the header file, change the function signature to use the real type instead of void* in order to prevent confusion. Signed-off-by: Vsevolod Kozlov <zaba@mm.st> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/YCQomJ1mO5BLxYOT@Vsevolods-Mini.lan
2021-01-22cfg80211: change netdev registration/unregistration semanticsJohannes Berg
We used to not require anything in terms of registering netdevs with cfg80211, using a netdev notifier instead. However, in the next patch reducing RTNL locking, this causes big problems, and the simplest way is to just require drivers to do things better. Change the registration/unregistration semantics to require the drivers to call cfg80211_(un)register_netdevice() when this is happening due to a cfg80211 request, i.e. add_virtual_intf() or del_virtual_intf() (or if it somehow has to happen in any other cfg80211 callback). Otherwise, in other contexts, drivers may continue to use the normal netdev (un)registration functions as usual. Internally, we still use the netdev notifier and track (by the new wdev->registered bool) if the wdev had already been added to cfg80211 or not. Link: https://lore.kernel.org/r/20210122161942.cf2f4b65e4e9.Ida8234e50da13eb675b557bac52a713ad4eddf71@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-02wilc1000: added 'ndo_set_mac_address' callback supportAjay Singh
Added support for 'ndo_set_mac_address call' callback to allow change of interface MAC address. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201125114059.10006-2-ajay.kathat@microchip.com
2020-07-14wilc1000: let wilc_mac_xmit() return NETDEV_TX_OKLuc Van Oostenryck
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type defining 'NETDEV_TX_OK' but this driver returns '0' instead of 'NETDEV_TX_OK'. Fix this by returning 'NETDEV_TX_OK' instead of '0'. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200629104009.84077-1-luc.vanoostenryck@gmail.com
2020-07-14wilc1000: use API version number info along with firmware filenameAjay Singh
Added version number info along with firmware name so driver can pick the correct revision of FW file. Moved FW filename macro as part of driver code & added MODULE_FIRMWARE to specify FW needed by module. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200710051826.3267-6-ajay.kathat@microchip.com
2020-07-14wilc1000: use unified single wilc1000 FW binaryAjay Singh
Modify WILC1000 binary filename to use single unified wilc1000 FW. A single wilc1000 binary is used for different wilc1000 revisions. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200710051826.3267-5-ajay.kathat@microchip.com
2020-06-26wilc1000: move wilc driver out of stagingAjay Singh
WILC1000 is an IEEE 802.11 b/g/n IoT link controller module. The WILC1000 connects to Microchip AVR/SMART MCUs, SMART MPUs, and other processors with minimal resource requirements with a simple SPI/SDIO-to-Wi-Fi interface. WILC1000 driver has been part of staging for few years. With contributions from the community, it has improved significantly. Full driver review has helped in achieving the current state. The details for those reviews are captured in 1 & 2. [1]. https://lore.kernel.org/linux-wireless/1537957525-11467-1-git-send-email-ajay.kathat@microchip.com/ [2]. https://lore.kernel.org/linux-wireless/1562896697-8002-1-git-send-email-ajay.kathat@microchip.com/ Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-25 19:13:55 +0000