summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2022-05-13mt76: dma: use kzalloc instead of devm_kzalloc for txwiFelix Fietkau
dma unmap is already needed for cleanup anyway, so we don't need the extra tracking and can save a bit of memory here Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: reduce tx queue lock hold timeFelix Fietkau
- call txq dequeue without holding txq lock (locking handled by mac80211) - disable bh around tx queue schedule Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: rework hardware/phy initializationFelix Fietkau
Clean up and fix error paths in mt7915_register_device Initialize second DBDC tx queue in mt7915_dma_init Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13mt76: mt7915: fix DBDC default band selection on MT7915DFelix Fietkau
This code was accidentally dropped while adding 6 GHz support Fixes: b4d093e321bd ("mt76: mt7915: add 6 GHz support") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-05-13rtlwifi: Use pr_warn instead of WARN_ONCEDongliang Mu
This memory allocation failure can be triggered by fault injection or high pressure testing, resulting a WARN. Fix this by replacing WARN with pr_warn. Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220511014453.1621366-1-dzm91@hust.edu.cn
2022-05-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Build issue in drivers/net/ethernet/sfc/ptp.c 54fccfdd7c66 ("sfc: efx_default_channel_type APIs can be static") 49e6123c65da ("net: sfc: fix memory leak due to ptp channel") https://lore.kernel.org/all/20220510130556.52598fe2@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-11Merge tag 'wireless-2022-05-11' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v5.18 Second set of fixes for v5.18 and hopefully the last one. We have a new iwlwifi maintainer, a fix to rfkill ioctl interface and important fixes to both stack and two drivers. * tag 'wireless-2022-05-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: rfkill: uapi: fix RFKILL_IOCTL_MAX_SIZE ioctl request definition nl80211: fix locking in nl80211_set_tx_bitrate_mask() mac80211_hwsim: call ieee80211_tx_prepare_skb under RCU protection mac80211_hwsim: fix RCU protected chanctx access mailmap: update Kalle Valo's email mac80211: Reset MBSSID parameters upon connection cfg80211: retrieve S1G operating channel number nl80211: validate S1G channel width mac80211: fix rx reordering with non explicit / psmp ack policy ath11k: reduce the wait time of 11d scan and hw scan while add interface MAINTAINERS: update iwlwifi driver maintainer iwlwifi: iwl-dbg: Use del_timer_sync() before freeing ==================== Link: https://lore.kernel.org/r/20220511154535.A1A12C340EE@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-11wfx: use container_of() to get vifJaehee Park
Currently, upon virtual interface creation, wfx_add_interface() stores a reference to the corresponding struct ieee80211_vif in private data, for later usage. This is not needed when using the container_of construct. This construct already has all the info it needs to retrieve the reference to the corresponding struct from the offset that is already available, inherent in container_of(), between its type and member inputs (struct ieee80211_vif and drv_priv, respectively). Remove vif (which was previously storing the reference to the struct ieee80211_vif) from the struct wfx_vif, define a function wvif_to_vif(wvif) for container_of(), and replace all wvif->vif with the newly defined container_of construct. Signed-off-by: Jaehee Park <jhpark1013@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220506170046.GA1297231@jaehee-ThinkPad-X1-Extreme
2022-05-11rtw89: add debug entry to dump BSSID CAMPing-Ke Shih
BSSID CAM is a kind of CAM that is used to determine if we receive a packet or not. Add an entry to assist in debugging. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220506120216.58567-6-pkshih@realtek.com
2022-05-11rtw89: add debug select to dump MAC pages 0x30 to 0x33Ping-Ke Shih
Dump new region 0x3000 to 0x33ff to help debug. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220506120216.58567-5-pkshih@realtek.com
2022-05-11rtw89: correct CCA controlPing-Ke Shih
EDCCA signal can block transmitting in certain situation, so ignore this signal and use others to decide transmitting time. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220506120216.58567-4-pkshih@realtek.com
2022-05-11rtw89: correct setting of RX MPDU lengthPing-Ke Shih
Set proper setting according to RX quota, and then it doesn't break buffer due to size of received packet exceeding buffer size. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220506120216.58567-3-pkshih@realtek.com
2022-05-11rtw89: 8852c: add settings to decrease the effect of DCHsuan Hung
Modify NBI and PD boost settings according to different primary channels. This setting can decrease the false alarm induced by DC. Signed-off-by: Hsuan Hung <hsuan8331@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220506120216.58567-2-pkshih@realtek.com
2022-05-11brcmfmac: allow setting wlan MAC address using device treePavel Löbl
This allows firmware to provide MAC address using device tree. Like in case there is no MAC burned in wlan NVRAM. Signed-off-by: Pavel Löbl <pavel@loebl.cz> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220506044246.67146-1-pavel@loebl.cz
2022-05-11wilc1000: add valid vmm_entry check before fetching from TX queueAjay Singh
'vmm_table' array contains the size of data buffer length including host header length. In 'vmm_table' array, the Zero value means the end of vmm_entries that needs to transfer to firmware which is calculated based on VMM free size in firmware. Use 'vmm_table' valid entry check before fetching the entry from TX queue to only copy valid number of entries to avoid possible NULL pointer exception observed sometimes during large file transfers. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220504161924.2146601-5-ajay.kathat@microchip.com
2022-05-11wilc1000: use 'u64' datatype for cookie variableAjay Singh
Use 'u64' instead of 'u32' for the cookie variable as expected by cfg80211 callback function argument. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220504161924.2146601-4-ajay.kathat@microchip.com
2022-05-11wilc1000: fix crash observed in AP mode with cfg80211_register_netdevice()Ajay Singh
Monitor(mon.) interface is used for handling the AP mode and 'ieee80211_ptr' reference is not getting set for it. Like earlier implementation, use register_netdevice() instead of cfg80211_register_netdevice() which expects valid 'ieee80211_ptr' reference to avoid the possible crash. Fixes: 2fe8ef106238 ("cfg80211: change netdev registration/unregistration semantics") Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220504161924.2146601-3-ajay.kathat@microchip.com
2022-05-11wilc1000: use fixed function base register value to access SDIO_FBR_ENABLE_CSAAjay Singh
The function number was not correct(reset to 0) when host resumes from suspend state. Use hardcoded value in function base information register(FBR base address) to re-initialize correctly on host resume. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220504161924.2146601-2-ajay.kathat@microchip.com
2022-05-11wilc1000: increase firmware version array sizeAjay Singh
Increase firmware version array size to hold complete version information. The firmware commit id(Build:) information is also part of the firmware version string. Firmware version format: WILC_WIFI_FW_REL_XX_XX Build: XXXXX e.g. WILC_WIFI_FW_REL_15_6 Build: 12804 Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220504161924.2146601-1-ajay.kathat@microchip.com
2022-05-10ath11k: remove redundant assignment to variables vht_mcs and he_mcsColin Ian King
The variables vht_mcs and he_mcs are being initialized in the start of for-loops however they are re-assigned new values in the loop and not used outside the loop. The initializations are redundant and can be removed. Cleans up clang scan warnings: warning: Although the value stored to 'vht_mcs' is used in the enclosing expression, the value is never actually read from 'vht_mcs' [deadcode.DeadStores] warning: Although the value stored to 'he_mcs' is used in the enclosing expression, the value is never actually read from 'he_mcs' [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220507184155.26939-1-colin.i.king@gmail.com
2022-05-10ath11k: Reuse the available memory after firmware reloadAnilkumar Kolli
Ath11k allocates memory when firmware requests memory in QMI. Coldboot calibration and firmware recovery uses firmware reload. On firmware reload, firmware sends memory request again. If Ath11k allocates memory on first firmware boot, reuse the available memory. Also check if the segment type and size is same on the next firmware boot. Reuse if segment type/size is same as previous firmware boot else free the segment and allocate the segment with size/type. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.6.0.1-00752-QCAHKSWPL_SILICONZ-1 Signed-off-by: Anilkumar Kolli <quic_akolli@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220506141448.10340-1-quic_akolli@quicinc.com
2022-05-10wil6210: remove 'freq' debugfsJohannes Berg
This is completely racy, remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220506095451.9852305a92c8.I05155824a1b9059eb59beccde81786dc69de354a@changeid
2022-05-10ath11k: Designating channel frequency when sending management framesBaochen Qiang
In case of Passpoint, the WLAN interface may be requested to remain on a specific channel and then to send some management frames on that channel. Now chanfreq of wmi_mgmt_send_cmd is set as 0, as a result firmware may choose a default but wrong channel. Fix it by assigning chanfreq field with the designated channel. This change only applies to WCN6855 and QCA6390, other chips are not affected. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220506013614.1580274-4-quic_bqiang@quicinc.com
2022-05-10ath11k: Don't check arvif->is_started before sending management framesBaochen Qiang
Commit 66307ca04057 ("ath11k: fix mgmt_tx_wmi cmd sent to FW for deleted vdev") wants both of below two conditions are true before sending management frames: 1: ar->allocated_vdev_map & (1LL << arvif->vdev_id) 2: arvif->is_started Actually the second one is not necessary because with the first one we can make sure the vdev is present. Also use ar->conf_mutex to synchronize vdev delete and mgmt. TX. This issue is found in case of Passpoint scenario where ath11k needs to send action frames before vdev is started. Fix it by removing the second condition. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Fixes: 66307ca04057 ("ath11k: fix mgmt_tx_wmi cmd sent to FW for deleted vdev") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220506013614.1580274-3-quic_bqiang@quicinc.com
2022-05-10ath11k: Implement remain-on-channel supportBaochen Qiang
Add remain on channel support, it is needed in several scenarios such as Passpoint etc. Currently this is supported by QCA6390, WCN6855, IPQ8074, IPQ6018 and QCN9074. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220506013614.1580274-2-quic_bqiang@quicinc.com
2022-05-10ath11k: Handle keepalive during WoWLAN suspend and resumeBaochen Qiang
With WoWLAN enabled and after sleeping for a rather long time, we are seeing that with some APs, it is not able to wake up the STA though the correct wake up pattern has been configured. This is because the host doesn't send keepalive command to firmware, thus firmware will not send any packet to the AP and after a specific time the AP kicks out the STA. Fix this issue by enabling keepalive before going to suspend and disabling it after resume back. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220506012540.1579604-1-quic_bqiang@quicinc.com
2022-05-09mac80211_hwsim: call ieee80211_tx_prepare_skb under RCU protectionJohannes Berg
This is needed since it might use (and pass out) pointers to e.g. keys protected by RCU. Can't really happen here as the frames aren't encrypted, but we need to still adhere to the rules. Fixes: cacfddf82baf ("mac80211_hwsim: initialize ieee80211_tx_info at hw_scan_work") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20220505230421.5f139f9de173.I77ae111a28f7c0e9fd1ebcee7f39dbec5c606770@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-09mac80211_hwsim: fix RCU protected chanctx accessJohannes Berg
We need to RCU protect the chanctx_conf access, so do that. Fixes: 585625c955b1 ("mac80211_hwsim: check TX and STA bandwidth") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20220505230421.fb8055c081a2.Ic6da3307c77a909bd61a0ea25dc2a4b08fe1b03f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-09ath11k: reset 11d state in process of recoveryWen Gong
When doing simulate_fw_crash operation periodically with a short interval time such as 10 seconds, it is easy happened WMI command timed out for WMI_SCAN_CHAN_LIST_CMDID in ath11k_reg_update_chan_list(). log: [42287.610053] ath11k_pci 0000:01:00.0: wmi command 12291 timeout [42287.610064] ath11k_pci 0000:01:00.0: failed to send WMI_SCAN_CHAN_LIST cmd [42287.610073] ath11k_pci 0000:01:00.0: failed to perform regd update : -11 Note that this issue does not occur with a longer interval such as 20 seconds. The reason the issue occurs with a shorter interval is the following steps: 1) Upon initial boot, or after device recovery, the initial hw scan plus the 11d scan will run, and when 6 GHz support is present, these scans can take up to 12 seconds to complete, so ath11k_reg_update_chan_list() is still waiting the completion of ar->completed_11d_scan. 2) If a simulate_fw_crash operation is received during this time, those scans do not complete, and ath11k_core_pre_reconfigure_recovery() complete the ar->completed_11d_scan, then ath11k_reg_update_chan_list() wakeup and start to send WMI_SCAN_CHAN_LIST_CMDID, but firmware is crashed at this moment, so wmi timed out occur. To address this issue, reset the 11d state during device recovery so that WMI_SCAN_CHAN_LIST_CMDID does not timed out for short interval time such as 10 seconds. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Fixes: 1f682dc9fb37 ("ath11k: reduce the wait time of 11d scan and hw scan while add interface") Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220505034636.29582-1-quic_wgong@quicinc.com
2022-05-09rtw88: adjust adaptivity option to 1Chin-Yen Lee
Fine tune algorithm of adaptivity sensitivity to avoid disconnecting from AP suddenly in field. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220506235045.4669-1-pkshih@realtek.com
2022-05-06ath11k: Fix RX de-fragmentation issue on WCN6750Manikanta Pubbisetty
The offset of REO register where the RX fragment destination ring is configured is different in WCN6750 as compared to WCN6855. Due to this differnce in offsets, on WCN6750, fragment destination ring will be configured incorrectly, leading to RX fragments not getting delivered to the driver. Fix this by defining HW specific offsets for the REO MISC CTL register. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220504083900.31513-1-quic_mpubbise@quicinc.com
2022-05-06ath10k: support bus and device specific API 1 BDF selectionRobert Marko
Some ath10k IPQ40xx devices like the MikroTik hAP ac2 and ac3 require the BDF-s to be extracted from the device storage instead of shipping packaged API 2 BDF-s. This is required as MikroTik has started shipping boards that require BDF-s to be updated, as otherwise their WLAN performance really suffers. This is however impossible as the devices that require this are release under the same revision and its not possible to differentiate them from devices using the older BDF-s. In OpenWrt we are extracting the calibration data during runtime and we are able to extract the BDF-s in the same manner, however we cannot package the BDF-s to API 2 format on the fly and can only use API 1 to provide BDF-s on the fly. This is an issue as the ath10k driver explicitly looks only for the board.bin file and not for something like board-bus-device.bin like it does for pre-cal data. Due to this we have no way of providing correct BDF-s on the fly, so lets extend the ath10k driver to first look for BDF-s in the board-bus-device.bin format, for example: board-ahb-a800000.wifi.bin If that fails, look for the default board file name as defined previously. Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211009221711.2315352-1-robimarko@gmail.com
2022-05-06ath10k: mac: fix too long linesKalle Valo
checkpatch warns: drivers/net/wireless/ath/ath10k/mac.c:2696: line length of 92 exceeds 90 columns drivers/net/wireless/ath/ath10k/mac.c:6942: line length of 94 exceeds 90 columns drivers/net/wireless/ath/ath10k/mac.c:6948: line length of 91 exceeds 90 columns These were introduced by commit 046d2e7c50e3 ("mac80211: prepare sta handling for MLO support"). Compile tested only. Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220503060415.24499-2-kvalo@kernel.org
2022-05-06ath11k: mac: fix too long lineKalle Valo
checkpatch warns: drivers/net/wireless/ath/ath11k/mac.c:7760: line length of 91 exceeds 90 columns This was introduced by commit 046d2e7c50e3 ("mac80211: prepare sta handling for MLO support"). Compile tested only. Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220503060415.24499-1-kvalo@kernel.org
2022-05-06wl1251: dynamically allocate memory used for DMAH. Nikolaus Schaller
With introduction of vmap'ed stacks, stack parameters can no longer be used for DMA and now leads to kernel panic. It happens at several places for the wl1251 (e.g. when accessed through SDIO) making it unuseable on e.g. the OpenPandora. We solve this by allocating temporary buffers or use wl1251_read32(). Tested on v5.18-rc5 with OpenPandora. Fixes: a1c510d0adc6 ("ARM: implement support for vmap'ed stacks") Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/1676021ae8b6d7aada0b1806fed99b1b8359bdc4.1651495112.git.hns@goldelico.com
2022-05-06qtnfmac: switch to netif_napi_add_weight()Jakub Kicinski
qtnfmac chooses its own magic NAPI weight so switch to the new API created for those who don't use NAPI_POLL_WEIGHT. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220504163316.549648-4-kuba@kernel.org
2022-05-06mt76: switch to netif_napi_add_tx()Jakub Kicinski
Switch to the new API not requiring passing in NAPI_POLL_WEIGHT. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220504163316.549648-3-kuba@kernel.org
2022-05-06wil6210: switch to netif_napi_add_tx()Jakub Kicinski
Switch to the new API not requiring passing in NAPI_POLL_WEIGHT. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220504163316.549648-2-kuba@kernel.org
2022-05-04ath11k: Add support for targets without trustzoneManikanta Pubbisetty
Add the support to attach WCN6750 and map iommu domain for targets which do not have the support of TrustZone. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00573-QCAMSLSWPLZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220328062032.28881-1-quic_mpubbise@quicinc.com
2022-05-04rtw89: 8852c: add 8852ce to Makefile and KconfigPing-Ke Shih
This initial vesion is usable now. It can support STA, AP and monitor modes, so we can add 8852ce to Kconfig and Makefile. We are still working on some features, such as deep power save, and BT coexistence. But, this version still can have a good WiFi-only performance already, and will continue to fine tune power consumption. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220503120001.79272-9-pkshih@realtek.com
2022-05-04rtw89: 8852c: fix warning of FIELD_PREP() mask typePing-Ke Shih
To fix the compiler warning of clang with i386 config, but not complain by gcc: __write_ctrl(R_AX_PWR_RATE_CTRL, B_AX_FORCE_PWR_BY_RATE_VALUE_MASK, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/wireless/realtek/rtw89/rtw8852c.c:2621:13: note: expanded from macro '__write_ctrl' u32 _wrt = FIELD_PREP(__msk, _val); \ ^~~~~~~~~~~~~~~~~~~~~~~ include/linux/bitfield.h:114:3: note: expanded from macro 'FIELD_PREP' __BF_FIELD_CHECK(_mask, 0ULL, _val, "FIELD_PREP: "); \ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/bitfield.h:71:53: note: expanded from macro '__BF_FIELD_CHECK' BUILD_BUG_ON_MSG(__bf_cast_unsigned(_mask, _mask) > \ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~ note: (skipping 1 expansions in backtrace; use -fmacro-backtrace-limit=0 to see all) include/linux/compiler_types.h:352:22: note: expanded from macro 'compiletime_assert' _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) ~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/compiler_types.h:340:23: note: expanded from macro '_compiletime_assert' __compiletime_assert(condition, msg, prefix, suffix) ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/compiler_types.h:332:9: note: expanded from macro '__compiletime_assert' if (!(condition)) \ ^~~~~~~~~ Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220503120001.79272-8-pkshih@realtek.com
2022-05-04rtw89: 8852c: correct register definitions used by 8852cPing-Ke Shih
First one could affect SER because of false alarm event. Second one can affect spur elimination. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220503120001.79272-7-pkshih@realtek.com
2022-05-04rtw89: correct AID settings of beamformeePing-Ke Shih
Without this fix, it would cause IOT issue due to AID mismatch. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220503120001.79272-6-pkshih@realtek.com
2022-05-04rtw89: ps: fine tune polling interval while changing low power modePing-Ke Shih
By experiments, it spends ~45/1090~2480us to enter/leave low power mode, so the old polling interval 1000us can waste time. Use smaller polling interval depends on experimental results to reduce the time to transition state. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220503120001.79272-5-pkshih@realtek.com
2022-05-04rtw89: 8852c: add basic and remaining chip_infoPing-Ke Shih
The chip_info include BT coexistence tables, size and number of hardware components, and supported functions. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220503120001.79272-4-pkshih@realtek.com
2022-05-04rtw89: 8852c: add chip_ops::bb_ctrl_btc_preagcPing-Ke Shih
Add to configure BT share RX path and related settings. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220503120001.79272-3-pkshih@realtek.com
2022-05-04rtw89: 8852c: rfk: get calibrated channels to notify firmwarePing-Ke Shih
The commit 16b44ed0ffd3 ("rtw89: add RF H2C to notify firmware") is to add firmware command, and this commit is to prepare the channels. Then, firmware can get proper channels. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220503120001.79272-2-pkshih@realtek.com
2022-05-04wfx: avoid flush_workqueue(system_highpri_wq) usageTetsuo Handa
Flushing system-wide workqueues is dangerous and will be forbidden. Replace system_highpri_wq with per "struct wfx_dev" bh_wq. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/f15574a6-aba4-72bc-73af-26fdcdf9fb63@I-love.SAKURA.ne.jp
2022-05-03Merge tag 'wireless-next-2022-05-03' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v5.19 First set of patches for v5.19 and this is a big one. We have two new drivers, a change in mac80211 STA API affecting most drivers and ath11k getting support for WCN6750. And as usual lots of fixes and cleanups all over. Major changes: new drivers - wfx: silicon labs devices - plfxlc: pureLiFi X, XL, XC devices mac80211 - host based BSS color collision detection - prepare sta handling for IEEE 802.11be Multi-Link Operation (MLO) support rtw88 - support TP-Link T2E devices rtw89 - support firmware crash simulation - preparation for 8852ce hardware support ath11k - Wake-on-WLAN support for QCA6390 and WCN6855 - device recovery (firmware restart) support for QCA6390 and WCN6855 - support setting Specific Absorption Rate (SAR) for WCN6855 - read country code from SMBIOS for WCN6855/QCA6390 - support for WCN6750 wcn36xx - support for transmit rate reporting to user space * tag 'wireless-next-2022-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (228 commits) rtw89: 8852c: rfk: add DPK rtw89: 8852c: rfk: add IQK rtw89: 8852c: rfk: add RX DCK rtw89: 8852c: rfk: add RCK rtw89: 8852c: rfk: add TSSI rtw89: 8852c: rfk: add LCK rtw89: 8852c: rfk: add DACK rtw89: 8852c: rfk: add RFK tables plfxlc: fix le16_to_cpu warning for beacon_interval rtw88: remove a copy of the NAPI_POLL_WEIGHT define carl9170: tx: fix an incorrect use of list iterator wil6210: use NAPI_POLL_WEIGHT for napi budget ath10k: remove a copy of the NAPI_POLL_WEIGHT define ath11k: Add support for WCN6750 device ath11k: Datapath changes to support WCN6750 ath11k: HAL changes to support WCN6750 ath11k: Add QMI changes for WCN6750 ath11k: Fetch device information via QMI for WCN6750 ath11k: Add register access logic for WCN6750 ath11k: Add HW params for WCN6750 ... ==================== Link: https://lore.kernel.org/r/20220503153622.C1671C385A4@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-03Merge 5.18-rc5 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here, and this resolves a merge issue in drivers/usb/dwc3/drd.c Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-31 10:15:53 +0000