summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2022-07-27wifi: ath11k: Fix register write failure on QCN9074Manikanta Pubbisetty
Commit 56c8ccf331bd ("ath11k: Add register access logic for WCN6750") regressed QCN9074. With the above mentioned commit, writes are failing for some registers on QCN9074 although the device seems to work normally. ath11k_pci 0000:03:00.0: failed to set pcie link register0x01e0e0a8: 0xffffffff != 0x00000010 ath11k_pci 0000:03:00.0: failed to set sysclk: -110 PCIe devices in ath11k (QCA6390, WCN6855, QCN9074, WCN6750) use window concept for register accesses. There are two schemes, dynamic & static window. In dynamic window scheme, a single window(region in the BAR) is mapped either to CE or DP register windows at any give time. QCA6390 & WCN6855 follow this scheme for register accesses. In static window scheme, CE & DP register windows are statically mapped to separate regions with in the BAR so that there is no switching of register windows between CE & DP register accesses. QCN9074 & WCN6750 follow this scheme although the window start offsets are different for QCN9074 & WCN6750. QCN9074 uses 3rd & 2nd window for DP & CE register accesses respectively whereas WCN6750 uses 1st & 2nd window for DP & CE. In QCN9074, along with 2nd & 3rd windows, 1st window is also used for certain configurations which commit 56c8ccf331bd ("ath11k: Add register access logic for WCN6750") did not account for and hence the regression. Fix this by going back to the original way of accessing the registers on QCN9074. Since this diverges from WCN6750 way of accessing registers, it is required to register window_read32/window_write32() pci_ops for WCN6750. We can also get rid of dp_window_idx & ce_window_idx members in hw_params, so remove them. Also add a new API ath11k_pcic_register_pci_ops() for registering pci_ops to the ath11k core. This API checks for mandatory pci_ops() and reports error if those are missing. Also initialize unused pci_ops to NULL. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1 Fixes: 56c8ccf331bd ("ath11k: Add register access logic for WCN6750") Reported-by: Maxime Bizon <mbizon@freebox.fr> Tested-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220608062954.27792-1-quic_mpubbise@quicinc.com
2022-07-27net: dsa: microchip: add support for phylink mac configArun Ramadoss
This patch add support for phylink mac config for ksz series of switches. All the files ksz8795, ksz9477 and lan937x uses the ksz common xmii function. Instead of calling from the individual files, it is moved to the ksz common phylink mac config function. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-27net: dsa: microchip: ksz8795: use common xmii functionArun Ramadoss
This patch updates the ksz8795 cpu configuration to use the ksz common xmii set functions. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-27net: dsa: microchip: ksz9477: use common xmii functionArun Ramadoss
In ksz9477.c file, configuring the xmii register is performed based on the flag NEW_XMII. The flag is reset for ksz9893 switch and set for other switch. This patch uses the ksz common xmii set and get function. The bit values are configured based on the chip id. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-27net: dsa: microchip: apply rgmii tx and rx delay in phylink mac configArun Ramadoss
This patch read the rgmii tx and rx delay from device tree and stored it in the ksz_port. It applies the rgmii delay to the xmii tune adjust register based on the interface selected in phylink mac config. There are two rgmii port in LAN937x and value to be loaded in the register vary depends on the port selected. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-27net: dsa: microchip: lan937x: add support for configuing xMII registerArun Ramadoss
This patch add the common ksz_set_xmii function for ksz series switch and update the lan937x code phylink mac config. The register address for the ksz8795 is Port 5 Interface control 6 and for all other switch is xMII Control 1. The bit value for selecting the interface is same for KSZ8795 and KSZ9893 are same. The bit values for KSZ9477 and lan973x are same. So, this patch add the bit value for each switches in ksz_chip_data and configure the registers based on the chip id. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-27net: dsa: microchip: add support for common phylink mac link upArun Ramadoss
This patch add the support for common phylink mac link up for the ksz series switch. The register address, bit position and values are configured based on the chip id to the dev->info structure. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-27net: dsa: microchip: add common duplex and flow control functionArun Ramadoss
This patch add common function for configuring the Full/Half duplex and transmit/receive flow control. KSZ8795 uses the Global control register 4 for configuring the duplex and flow control, whereas all other KSZ9477 based switch uses the xMII Control 0 register. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-27net: dsa: microchip: add common ksz port xmii speed selection functionArun Ramadoss
This patch adds the function for configuring the 100/10Mbps speed selection for the ksz switches. KSZ8795 switch uses Global control 4 register 0x06 bit 4 for choosing 100/10Mpbs. Other switches uses xMII control 1 0xN300 for it. For KSZ8795, if the bit is set then 10Mbps is chosen and if bit is clear then 100Mbps chosen. For all other switches it is other way around, if the bit is set then 100Mbps is chosen. So, this patch add the generic function for ksz switch to select the 100/10Mbps speed selection. While configuring, first it disables the gigabit functionality and then configure the respective speed. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-27net: dsa: microchip: add common gigabit set and get functionArun Ramadoss
This patch add helper function for setting and getting the gigabit enable for the ksz series switch. KSZ8795 switch has different register address compared to all other ksz switches. KSZ8795 series uses the Port 5 Interface control 6 Bit 6 for configuring the 1Gbps or 100/10Mbps speed selection. All other switches uses the xMII control 1 0xN301 register Bit6 for gigabit. Further, for KSZ8795 & KSZ9893 switches if bit 1 then 1Gbps is chosen and if bit 0 then 100/10Mbps is chosen. It is other way around for other switches bit 0 is for 1Gbps. So, this patch implements the common function for configuring the gigabit set and get capability. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-26mlxsw: core_linecards: Implement line card device flashingJiri Pirko
Implement flash_update() devlink op for the line card devlink instance to allow user to update line card gearbox FW using MDDT register and mlxfw. Example: $ devlink dev flash auxiliary/mlxsw_core.lc.0 file mellanox/fw-AGB-rel-19_2010_1312-022-EVB.mfa2 Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26mlxsw: core_linecards: Expose device PSID over device infoJiri Pirko
Use tunneled MGIR to obtain PSID of line card device and extend device_info_get() op to fill up the info with that. Example: $ devlink dev info auxiliary/mlxsw_core.lc.0 auxiliary/mlxsw_core.lc.0: versions: fixed: hw.revision 0 fw.psid MT_0000000749 running: ini.version 4 fw 19.2010.1312 Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26mlxsw: reg: Add Management DownStream Device Tunneling RegisterJiri Pirko
The MDDT register allows to deliver query and request messages (PRM registers, commands) to a DownStream device. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26mlxsw: core_linecards: Probe active line cards for devices and expose FW versionJiri Pirko
In case the line card is active, go over all possible existing devices (gearboxes) on it and expose FW version of the flashable one. Example: $ devlink dev info auxiliary/mlxsw_core.lc.0 auxiliary/mlxsw_core.lc.0: versions: fixed: hw.revision 0 running: ini.version 4 fw 19.2010.1312 Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26mlxsw: reg: Extend MDDQ by device_infoJiri Pirko
Extend existing MDDQ register by possibility to query information about devices residing on a line card. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26mlxsw: core_linecards: Expose HW revision and INI versionJiri Pirko
Implement info_get() to expose HW revision of a linecard and loaded INI version. Example: $ devlink dev info auxiliary/mlxsw_core.lc.0 auxiliary/mlxsw_core.lc.0: versions: fixed: hw.revision 0 running: ini.version 4 Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26mlxsw: core_linecards: Introduce per line card auxiliary deviceJiri Pirko
In order to be eventually able to expose line card gearbox version and possibility to flash FW, model the line card as a separate device on auxiliary bus. Add the auxiliary device for provisioned line card in order to be able to expose provisioned line card info over devlink dev info. When the line card becomes active, there may be other additional info added to the output. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26ice: do not setup vlan for loopback VSIMaciej Fijalkowski
Currently loopback test is failiing due to the error returned from ice_vsi_vlan_setup(). Skip calling it when preparing loopback VSI. Fixes: 0e674aeb0b77 ("ice: Add handler for ethtool selftest") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26ice: check (DD | EOF) bits on Rx descriptor rather than (EOP | RS)Maciej Fijalkowski
Tx side sets EOP and RS bits on descriptors to indicate that a particular descriptor is the last one and needs to generate an irq when it was sent. These bits should not be checked on completion path regardless whether it's the Tx or the Rx. DD bit serves this purpose and it indicates that a particular descriptor is either for Rx or was successfully Txed. EOF is also set as loopback test does not xmit fragmented frames. Look at (DD | EOF) bits setting in ice_lbtest_receive_frames() instead of EOP and RS pair. Fixes: 0e674aeb0b77 ("ice: Add handler for ethtool selftest") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26ice: Fix VSIs unable to share unicast MACAnirudh Venkataramanan
The driver currently does not allow two VSIs in the same PF domain to have the same unicast MAC address. This is incorrect in the sense that a policy decision is being made in the driver when it must be left to the user. This approach was causing issues when rebooting the system with VFs spawned not being able to change their MAC addresses. Such errors were present in dmesg: [ 7921.068237] ice 0000:b6:00.2 ens2f2: Unicast MAC 6a:0d:e4:70:ca:d1 already exists on this PF. Preventing setting VF 7 unicast MAC address to 6a:0d:e4:70:ca:d1 Fix that by removing this restriction. Doing this also allows us to remove some additional code that's checking if a unicast MAC filter already exists. Fixes: 47ebc7b02485 ("ice: Check if unicast MAC exists before setting VF MAC") Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26ice: Fix tunnel checksum offload with fragmented trafficPrzemyslaw Patynowski
Fix checksum offload on VXLAN tunnels. In case, when mpls protocol is not used, set l4 header to transport header of skb. This fixes case, when user tries to offload checksums of VXLAN tunneled traffic. Steps for reproduction (requires link partner with tunnels): ip l s enp130s0f0 up ip a f enp130s0f0 ip a a 10.10.110.2/24 dev enp130s0f0 ip l s enp130s0f0 mtu 1600 ip link add vxlan12_sut type vxlan id 12 group 238.168.100.100 dev enp130s0f0 dstport 4789 ip l s vxlan12_sut up ip a a 20.10.110.2/24 dev vxlan12_sut iperf3 -c 20.10.110.1 #should connect Offload params: td_offset, cd_tunnel_params were corrupted, due to l4 header pointing wrong address. NIC would then drop those packets internally, due to incorrect TX descriptor data, which increased GLV_TEPC register. Fixes: 69e66c04c672 ("ice: Add mpls+tso support") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26ice: Fix max VLANs available for VFPrzemyslaw Patynowski
Legacy VLAN implementation allows for untrusted VF to have 8 VLAN filters, not counting VLAN 0 filters. Current VLAN_V2 implementation lowers available filters for VF, by counting in VLAN 0 filter for both TPIDs. Fix this by counting only non zero VLAN filters. Without this patch, untrusted VF would not be able to access 8 VLAN filters. Fixes: cc71de8fa133 ("ice: Add support for VIRTCHNL_VF_OFFLOAD_VLAN_V2") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26ice: Add support for PPPoE hardware offloadMarcin Szycik
Add support for creating PPPoE filters in switchdev mode. Add support for parsing PPPoE and PPP-specific tc options: pppoe_sid and ppp_proto. Example filter: tc filter add dev $PF1 ingress protocol ppp_ses prio 1 flower pppoe_sid \ 1234 ppp_proto ip skip_sw action mirred egress redirect dev $VF1_PR Changes in iproute2 are required to use the new fields. ICE COMMS DDP package is required to create a filter as it contains PPPoE profiles. Added a warning message when loaded DDP package does not contain required profiles. Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26octeontx2-pf: Fix UDP/TCP src and dst port tc filtersSubbaraya Sundeep
Check the mask for non-zero value before installing tc filters for L4 source and destination ports. Otherwise installing a filter for source port installs destination port too and vice-versa. Fixes: 1d4d9e42c240 ("octeontx2-pf: Add tc flower hardware offload on ingress traffic") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-26octeontx2-pf: cn10k: Fix egress ratelimit configurationSunil Goutham
NIX_AF_TLXX_PIR/CIR register format has changed from OcteonTx2 to CN10K. CN10K supports larger burst size. Fix burst exponent and burst mantissa configuration for CN10K. Also fixed 'maxrate' from u32 to u64 since 'police.rate_bytes_ps' passed by stack is also u64. Fixes: e638a83f167e ("octeontx2-pf: TC_MATCHALL egress ratelimiting offload") Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-26octeontx2-pf: Fix UDP/TCP src and dst port tc filtersSubbaraya Sundeep
Check the mask for non-zero value before installing tc filters for L4 source and destination ports. Otherwise installing a filter for source port installs destination port too and vice-versa. Fixes: 1d4d9e42c240 ("octeontx2-pf: Add tc flower hardware offload on ingress traffic") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-26octeontx2-pf: cn10k: Fix egress ratelimit configurationSunil Goutham
NIX_AF_TLXX_PIR/CIR register format has changed from OcteonTx2 to CN10K. CN10K supports larger burst size. Fix burst exponent and burst mantissa configuration for CN10K. Also fixed 'maxrate' from u32 to u64 since 'police.rate_bytes_ps' passed by stack is also u64. Fixes: e638a83f167e ("octeontx2-pf: TC_MATCHALL egress ratelimiting offload") Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-26geneve: Use ip_tunnel_key flow flags in route lookupsPaul Chaignon
Use the new ip_tunnel_key field with the flow flags in the IPv4 route lookups for the encapsulated packet. This will be used by the bpf_skb_set_tunnel_key helper in the subsequent commit. Signed-off-by: Paul Chaignon <paul@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/fcc2e0eea01e8ea465a180126366ec20596ba530.1658759380.git.paul@isovalent.com
2022-07-26vxlan: Use ip_tunnel_key flow flags in route lookupsPaul Chaignon
Use the new ip_tunnel_key field with the flow flags in the IPv4 route lookups for the encapsulated packet. This will be used by the bpf_skb_set_tunnel_key helper in a subsequent commit. Signed-off-by: Paul Chaignon <paul@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/1ffc95c3d60182fd5ec0cf6602083f8f68afe98f.1658759380.git.paul@isovalent.com
2022-07-26sfc/siena: fix repeated words in commentswangjianli
Delete the redundant word 'in'. Signed-off-by: wangjianli <wangjianli@cdjrlc.com> Link: https://lore.kernel.org/r/20220724075207.21080-1-wangjianli@cdjrlc.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-26sfc/falcon: fix repeated words in commentswangjianli
Delete the redundant word 'in'. Signed-off-by: wangjianli <wangjianli@cdjrlc.com> Link: https://lore.kernel.org/r/20220724074746.19550-1-wangjianli@cdjrlc.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-26can: etas_es58x: remove DRV_VERSIONVincent Mailhol
DRV_VERSION is a leftover from when the driver was an out of tree module. The driver version was never incremented despite of the numerous changes made since it was mainstreamed. Keeping an unmaintained driver version number makes no sense. Remove it and rely on the kernel version instead. Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20220726082707.58758-11-mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-26can: etas_es58x: replace ES58X_MODULE_NAME with KBUILD_MODNAMEVincent Mailhol
ES58X_MODULE_NAME is set to "etas_es58x". KBUILD_MODNAME also evaluates to "etas_es58x". Get rid of ES58X_MODULE_NAME and rely on KBUILD_MODNAME instead. Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20220726082707.58758-10-mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-26can: ubs_8dev: use KBUILD_MODNAME instead of hard coded namesVincent Mailhol
The driver uses the string "usb_8dev" to populate usb_driver::name and can_bittiming_const::name. KBUILD_MODNAME also evaluates to "ubs_8dev". Use KBUILD_MODNAME and get rid on the hardcoded string names. Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20220726082707.58758-9-mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-26can: kvaser_usb: use KBUILD_MODNAME instead of hard coded namesVincent Mailhol
The driver uses the string "kvaser_usb" to populate usb_driver::name. KBUILD_MODNAME also evaluates to "kvaser_ubs". Use KBUILD_MODNAME and get rid on the hardcoded string names. Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20220726082707.58758-8-mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-26can: gs_ubs: use KBUILD_MODNAME instead of hard coded namesVincent Mailhol
The driver uses the string "gs_usb" to populate usb_driver::name, can_bittiming_const::name and can_data_bittiming_const::name. KBUILD_MODNAME evaluates to "gs_ubs". Use KBUILD_MODNAME and get rid on the hardcoded string names. Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20220726082707.58758-7-mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-26can: esd_usb: use KBUILD_MODNAME instead of hard coded namesVincent Mailhol
The driver uses the string "ems_usb" to populate usb_driver::name. KBUILD_MODNAME also evaluates to "esd_ubs". Use KBUILD_MODNAME and get rid on the hardcoded string names. CC: Frank Jungclaus <frank.jungclaus@esd.eu> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20220726082707.58758-6-mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-26can: softing: use KBUILD_MODNAME instead of hard coded namesVincent Mailhol
The driver uses the string "softing" to populate platform_driver::name and can_bittiming_const::name. KBUILD_MODNAME also evaluates to "softing". Use KBUILD_MODNAME and get rid on the hardcoded string names. Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20220726082707.58758-5-mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-26can: ems_usb: use KBUILD_MODNAME instead of hard coded namesVincent Mailhol
The driver uses the string "ems_usb" to populate usb_driver::name and can_bittiming_const::name. KBUILD_MODNAME also evaluates to "ems_ubs". Use KBUILD_MODNAME and get rid on the hardcoded string names. Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20220726082707.58758-3-mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-26can: can327: use KBUILD_MODNAME instead of hard coded namesVincent Mailhol
The driver uses the string "can327" to populate tty_ldisc_ops::name. KBUILD_MODNAME also evaluates to "can327". Use KBUILD_MODNAME and get rid on the hardcoded string names. Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/20220726082707.58758-2-mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-26can: mcp251xfd: mcp251xfd_dump(): fix commentMarc Kleine-Budde
The driver uses only 1 TEF and 1 TX ring, but a variable number of RX rings. Fix comment accordingly. Fixes: e0ab3dd5f98f ("can: mcp251xfd: add dev coredump support") Link: https://lore.kernel.org/all/20220726084328.4042678-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-25net: ethernet: stmicro: stmmac: permit MTU change with interface upChristian Marangi
Remove the limitation where the interface needs to be down to change MTU by releasing and opening the stmmac driver to set the new MTU. Also call the set_filter function to correctly init the port. This permits to remove the EBUSY error while the ethernet port is running permitting a correct MTU change if for example a DSA request a MTU change for a switch CPU port. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-25net: ethernet: stmicro: stmmac: generate stmmac dma conf before openChristian Marangi
Rework the driver to generate the stmmac dma_conf before stmmac_open. This permits a function to first check if it's possible to allocate a new dma_config and then pass it directly to __stmmac_open and "open" the interface with the new configuration. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-25net: ethernet: stmicro: stmmac: move dma conf to dedicated structChristian Marangi
Move dma buf conf to dedicated struct. This in preparation for code rework that will permit to allocate separate dma_conf without affecting the priv struct. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-25net: ethernet: stmicro: stmmac: first disable all queues and disconnect in ↵Christian Marangi
release Disable all queues and disconnect before tx_disable in stmmac_release to prevent a corner case where packet may be still queued at the same time tx_disable is called resulting in kernel panic if some packet still has to be processed. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-25net: ethernet: stmicro: stmmac: move queue reset to dedicated functionsChristian Marangi
Move queue reset to dedicated functions. This aside from a simple cleanup is also required to allocate a dma conf without resetting the tx queue while the device is temporarily detached as now the reset is not part of the dma init function and can be done later in the code flow. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-25i40e: Fix interface init with MSI interrupts (no MSI-X)Michal Maloszewski
Fix the inability to bring an interface up on a setup with only MSI interrupts enabled (no MSI-X). Solution is to add a default number of QPs = 1. This is enough, since without MSI-X support driver enables only a basic feature set. Fixes: bc6d33c8d93f ("i40e: Fix the number of queues available to be mapped for use") Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com> Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220722175401.112572-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-25Merge tag 'wireless-next-2022-07-25' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v5.20 Third set of patches for v5.20. MLO work continues and we have a lot of stack changes due to that, including driver API changes. Not much driver patches except on mt76. Major changes: cfg80211/mac80211 - more prepartion for Wi-Fi 7 Multi-Link Operation (MLO) support, works with one link now - align with IEEE Draft P802.11be_D2.0 - hardware timestamps for receive and transmit mt76 - preparation for new chipset support - ACPI SAR support * tag 'wireless-next-2022-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (254 commits) wifi: mac80211: fix link data leak wifi: mac80211: mlme: fix disassoc with MLO wifi: mac80211: add macros to loop over active links wifi: mac80211: remove erroneous sband/link validation wifi: mac80211: mlme: transmit assoc frame with address translation wifi: mac80211: verify link addresses are different wifi: mac80211: rx: track link in RX data wifi: mac80211: optionally implement MLO multicast TX wifi: mac80211: expand ieee80211_mgmt_tx() for MLO wifi: nl80211: add MLO link ID to the NL80211_CMD_FRAME TX API wifi: mac80211: report link ID to cfg80211 on mgmt RX wifi: cfg80211: report link ID in NL80211_CMD_FRAME wifi: mac80211: add hardware timestamps for RX and TX wifi: cfg80211: add hardware timestamps to frame RX info wifi: cfg80211/nl80211: move rx management data into a struct wifi: cfg80211: add a function for reporting TX status with hardware timestamps wifi: nl80211: add RX and TX timestamp attributes wifi: ieee80211: add helper functions for detecting TM/FTM frames wifi: mac80211_hwsim: handle links for wmediumd/virtio wifi: mac80211: sta_info: fix link_sta insertion ... ==================== Link: https://lore.kernel.org/r/20220725174547.EA465C341C6@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-25Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v5.20. One fix and rest minor cleanup.
2022-07-25Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 40GbE Intel Wired LAN Driver Updates 2022-07-22 This series contains updates to i40e and iavf drivers. Przemyslaw adds a helper function for determining whether TC MQPRIO is enabled for i40e. Avinash utilizes the driver's bookkeeping of filters to check for duplicate filter before sending the request to the PF for iavf. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-24 06:57:53 +0000