summaryrefslogtreecommitdiff
path: root/drivers/pci/controller/dwc/pcie-qcom.c
AgeCommit message (Collapse)Author
2022-09-29PCI: qcom: Rename host-init error labelJohan Hovold
Use a more descriptive name for the reset host-init error label for consistency. Link: https://lore.kernel.org/r/20220928155421.21660-3-johan+linaro@kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2022-09-29PCI: qcom: Drop unused post_deinit callbackJohan Hovold
Drop the unused and confusingly named post_deinit callback that was added for the now removed pipe clock handling. If ever needed we can add back a callback named pre_deinit (or perhaps rather pre_phy_power_off) instead. Link: https://lore.kernel.org/r/20220928155421.21660-2-johan+linaro@kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
2022-08-23PCI: qcom: Sort device-id tableJohan Hovold
Sort the device-id table entries alphabetically by compatible string to make it easier to find entries and add new ones. Link: https://lore.kernel.org/r/20220714071348.6792-9-johan+linaro@kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Brian Masney <bmasney@redhat.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-08-23PCI: qcom: Clean up IP configurationsJohan Hovold
The various IP versions have different configurations that are encoded in separate sets of operation callbacks. Currently, there is no need for also maintaining corresponding sets of data parameters, but it is conceivable that these may again be found useful (e.g. to implement minor variations of the operation callbacks). Rename the default configuration structures after the IP version they apply to so that they can more easily be reused by different SoCs. Note that SoC specific configurations can be added later if need arises (e.g. cfg_sc8280xp). Link: https://lore.kernel.org/r/20220714071348.6792-8-johan+linaro@kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Brian Masney <bmasney@redhat.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-08-23PCI: qcom: Make all optional clocks optionalJohan Hovold
The kernel is not a devicetree validator and does not need to re-encode information which is already available in the devicetree. This is specifically true for the optional PCIe clocks, some of which are really interconnect clocks. Treat also the 2.7.0 optional clocks as truly optional instead of maintaining a list of clocks per compatible (including two compatible strings for the two identical controllers on sm8450) just to validate the devicetree. Link: https://lore.kernel.org/r/20220714071348.6792-7-johan+linaro@kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Brian Masney <bmasney@redhat.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-08-23PCI: qcom: Add support for SA8540PJohan Hovold
The SA8540P platform has five PCIe controllers: two 4-lane, two 2-lane and one 1-lane. Add a new "qcom,pcie-sa8540p" compatible string and reuse the 1.9.0 ops. Note that like for SC8280XP, the SA8540P controllers need two or three interconnect clocks to be enabled. Link: https://lore.kernel.org/r/20220714071348.6792-6-johan+linaro@kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Brian Masney <bmasney@redhat.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-08-23PCI: qcom: Add support for SC8280XPJohan Hovold
The SC8280XP platform has seven PCIe controllers: two used with USB4, two 4-lane, two 2-lane and one 1-lane. Add a new "qcom,pcie-sc8280xp" compatible string and reuse the 1.9.0 ops. Note that the SC8280XP controllers need two or three interconnect clocks to be enabled. Model these as optional clocks to avoid encoding devicetree data in the PCIe driver. Note that the same could be done for the SM8450 interconnect clocks and possibly also for the TBU clocks. Link: https://lore.kernel.org/r/20220714071348.6792-5-johan+linaro@kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-08-04Merge branch 'pci/ctrl/qcom'Bjorn Helgaas
- Add PHY clock source implementation (Dmitry Baryshkov) - Use new clk_regmap_phy_mux_ops for gcc-sm8450 and gcc-sc7280 PCIe pipe clocks (Dmitry Baryshkov) - Set up rev 2.1.0 PARF_PHY before enabling clocks (Christian Marangi) - Power on PHY before accessing IPQ8074 DBI registers to avoid boot hangs (Robert Marko) - Power on PHY before accessing DBI registers on all variants for consistency (Robert Marko) - Remove unnecessary pipe_clk handling since this is done in PHY drivers (Dmitry Baryshkov) - Drop manual pipe_clk_src handling (Dmitry Baryshkov) - Move GEN3_RELATED DBI definitions to common dwc header (Baruch Siach) - Define slot capabilities using generic PCI_EXP_SLTCAP_* macros (Baruch Siach) - Add IPQ60xx support (Selvam Sathappan Periakaruppan) - Fix DT description typo (Baruch Siach) - Fix DT "compatibles" typo (Johan Hovold) - Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru) * pci/ctrl/qcom: PCI: qcom: Allow ASPM L1 and substates for 2.7.0 dt-bindings: PCI: qcom: Fix reset conditional dt-bindings: PCI: qcom: Fix description typo PCI: qcom: Add IPQ60xx support PCI: qcom: Define slot capabilities using PCI_EXP_SLTCAP_* PCI: dwc: Move GEN3_RELATED DBI definitions to common header PCI: qcom: Drop manual pipe_clk_src handling PCI: qcom: Remove unnecessary pipe_clk handling PCI: qcom: Power on PHY before DBI register accesses PCI: qcom: Power on PHY before IPQ8074 DBI register accesses PCI: qcom: Set up rev 2.1.0 PARF_PHY before enabling clocks clk: qcom: gcc-sc7280: use new clk_regmap_phy_mux_ops for PCIe pipe clocks clk: qcom: gcc-sm8450: use new clk_regmap_phy_mux_ops for PCIe pipe clocks clk: qcom: regmap: add PHY clock source implementation
2022-07-29PCI: qcom: Allow ASPM L1 and substates for 2.7.0Krishna chaitanya chundru
Allow ASPM L1 and its substates. By default this is disabled in the qcom specific hardware. Enable it explicitly only for controllers belonging to 2_7_0. This does not affect any link capability registers; it will allow the link transitions to L1 and its substates only if they are already supported. Link: https://lore.kernel.org/r/1657886366-32685-1-git-send-email-quic_krichai@quicinc.com Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-07-15PCI: qcom: Add IPQ60xx supportSelvam Sathappan Periakaruppan
IPQ60xx series of SoCs have one port of PCIe gen 3. Add support for that platform. The code is based on downstream[1] Codeaurora kernel v5.4 (branch win.linuxopenwrt.2.0). Split out the DBI registers access part from .init into .post_init. DBI registers are only accessible after phy_power_on(). [1] https://source.codeaurora.org/quic/qsdk/oss/kernel/linux-ipq-5.4/ Link: https://lore.kernel.org/r/f7f848653c99abbf9a0f877949a44e52329543ae.1655799816.git.baruch@tkos.co.il Tested-by: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com> Signed-off-by: Baruch Siach <baruch.siach@siklu.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-07-15PCI: qcom: Define slot capabilities using PCI_EXP_SLTCAP_*Baruch Siach
The PCIE_CAP_LINK1_VAL macro actually defines slot capabilities. Use PCI_EXP_SLTCAP_* macros to spell its value, and rename it to better describe its meaning. Link: https://lore.kernel.org/r/3025d5e1d8da64798db6958f9780c4763fbcac47.1655799816.git.baruch@tkos.co.il Signed-off-by: Baruch Siach <baruch.siach@siklu.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-07-15PCI: qcom: Drop manual pipe_clk_src handlingDmitry Baryshkov
Manual reparenting of pipe_clk_src is being replaced with the parking of the clock with clk_disable()/clk_enable() in the PHY driver. Drop redundant code switching of the pipe clock between the PHY clock source and the safe bi_tcxo. Link: https://lore.kernel.org/r/20220608105238.2973600-6-dmitry.baryshkov@linaro.org Tested-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-07-14PCI: qcom: Remove unnecessary pipe_clk handlingDmitry Baryshkov
PCIe PHY drivers (both QMP and PCIe2) already do clk_prepare_enable() / clk_prepare_disable() pipe_clk. Remove extra calls to enable/disable this clock from the PCIe driver, so that the PHY driver can manage the clock on its own. [bhelgaas: rebase on Robert Marko's DBI cleanup: https://lore.kernel.org/r/20220623155004.688090-2-robimarko@gmail.com] Link: https://lore.kernel.org/r/20220608105238.2973600-5-dmitry.baryshkov@linaro.org Tested-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-07-13PCI: qcom: Power on PHY before DBI register accessesRobert Marko
IPQ8074 requires the PHY to be powered on before accessing DBI registers. It's not clear whether other variants have the same dependency, but there seems to be no reason for them to be different, so move all the DBI accesses from .init() to .post_init() so they are all after phy_power_on(). [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220623155004.688090-2-robimarko@gmail.com Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-13PCI: qcom: Power on PHY before IPQ8074 DBI register accessesRobert Marko
Currently the Gen2 port in IPQ8074 will cause the system to hang as it accesses DBI registers in qcom_pcie_init_2_3_3(), and those are only accesible after phy_power_on(). Move the DBI read/writes to a new qcom_pcie_post_init_2_3_3(), which is executed after phy_power_on(). Link: https://lore.kernel.org/r/20220623155004.688090-1-robimarko@gmail.com Fixes: a0fd361db8e5 ("PCI: dwc: Move "dbi", "dbi2", and "addr_space" resource setup into common code") Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: stable@vger.kernel.org # v5.11+
2022-07-13PCI: qcom: Set up rev 2.1.0 PARF_PHY before enabling clocksChristian Marangi
We currently enable clocks BEFORE we write to PARF_PHY_CTRL reg to enable clocks and resets. This causes the driver to never set to a ready state with the error 'Phy link never came up'. This is caused by the PHY clock getting enabled before setting the required bits in the PARF regs. A workaround for this was set but with this new discovery we can drop the workaround and use a proper solution to the problem by just enabling the clock only AFTER the PARF_PHY_CTRL bit is set. This correctly sets up the PCIe link and makes it usable even when a bootloader leaves the PCIe link in an undefined state. Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Link: https://lore.kernel.org/r/20220708222743.27019-1-ansuelsmth@gmail.com Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-05PCI: dwc: Rename struct pcie_port to dw_pcie_rpSerge Semin
All of the DW PCIe core driver entities except the pcie_port struct have names with the "dw_" prefix to distinguish local and common PCIe name spaces, and endpoint-related entities have an "_ep" suffix. Rename struct pcie_port to dw_pcie_rp to make it more consistent with other names. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143428.8334-16-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
2022-05-27Merge tag 'pci-v5.19-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Resource management: - Restrict E820 clipping to PCI host bridge windows (Bjorn Helgaas) - Log E820 clipping better (Bjorn Helgaas) - Add kernel cmdline options to enable/disable E820 clipping (Hans de Goede) - Disable E820 reserved region clipping for IdeaPads, Yoga, Yoga Slip, Acer Spin 5, Clevo Barebone systems where clipping leaves no usable address space for touchpads, Thunderbolt devices, etc (Hans de Goede) - Disable E820 clipping by default starting in 2023 (Hans de Goede) PCI device hotplug: - Include files to remove implicit dependencies (Christophe Leroy) - Only put Root Ports in D3 if they can signal and wake from D3 so AMD Yellow Carp doesn't miss hotplug events (Mario Limonciello) Power management: - Define pci_restore_standard_config() only for CONFIG_PM_SLEEP since it's unused otherwise (Krzysztof Kozlowski) - Power up devices completely, including anything platform firmware needs to do, during runtime resume (Rafael J. Wysocki) - Move pci_resume_bus() to PM callbacks so we observe the required bridge power-up delays (Rafael J. Wysocki) - Drop unneeded runtime_d3cold device flag (Rafael J. Wysocki) - Split pci_raw_set_power_state() between pci_power_up() and a new pci_set_low_power_state() (Rafael J. Wysocki) - Set current_state to D3cold if config read returns ~0, indicating the device is not accessible (Rafael J. Wysocki) - Do not call pci_update_current_state() from pci_power_up() so BARs and ASPM config are restored correctly (Rafael J. Wysocki) - Write 0 to PMCSR in pci_power_up() in all cases (Rafael J. Wysocki) - Split pci_power_up() to pci_set_full_power_state() to avoid some redundant operations (Rafael J. Wysocki) - Skip restoring BARs if device is not in D0 (Rafael J. Wysocki) - Rearrange and clarify pci_set_power_state() (Rafael J. Wysocki) - Remove redundant BAR restores from pci_pm_thaw_noirq() (Rafael J. Wysocki) Virtualization: - Acquire device lock before config space access lock to avoid AB/BA deadlock with sriov_numvfs_store() (Yicong Yang) Error handling: - Clear MULTI_ERR_COR/UNCOR_RCV bits, which a race could previously leave permanently set (Kuppuswamy Sathyanarayanan) Peer-to-peer DMA: - Whitelist Intel Skylake-E Root Ports regardless of which devfn they are (Shlomo Pongratz) ASPM: - Override L1 acceptable latency advertised by Intel DG2 so ASPM L1 can be enabled (Mika Westerberg) Cadence PCIe controller driver: - Set up device-specific register to allow PTM Responder to be enabled by the normal architected bit (Christian Gmeiner) - Override advertised FLR support since the controller doesn't implement FLR correctly (Parshuram Thombare) Cadence PCIe endpoint driver: - Correct bitmap size for the ob_region_map of outbound window usage (Dan Carpenter) Freescale i.MX6 PCIe controller driver: - Fix PERST# assertion/deassertion so we observe the required delays before accessing device (Francesco Dolcini) Freescale Layerscape PCIe controller driver: - Add "big-endian" DT property (Hou Zhiqiang) - Update SCFG DT property (Hou Zhiqiang) - Add "aer", "pme", "intr" DT properties (Li Yang) - Add DT compatible strings for ls1028a (Xiaowei Bao) Intel VMD host bridge driver: - Assign VMD IRQ domain before enumeration to avoid IOMMU interrupt remapping errors when MSI-X remapping is disabled (Nirmal Patel) - Revert VMD workaround that kept MSI-X remapping enabled when IOMMU remapping was enabled (Nirmal Patel) Marvell MVEBU PCIe controller driver: - Add of_pci_get_slot_power_limit() to parse the 'slot-power-limit-milliwatt' DT property (Pali Rohár) - Add mvebu support for sending Set_Slot_Power_Limit message (Pali Rohár) MediaTek PCIe controller driver: - Fix refcount leak in mtk_pcie_subsys_powerup() (Miaoqian Lin) MediaTek PCIe Gen3 controller driver: - Reset PHY and MAC at probe time (AngeloGioacchino Del Regno) Microchip PolarFlare PCIe controller driver: - Add chained_irq_enter()/chained_irq_exit() calls to mc_handle_msi() and mc_handle_intx() to avoid lost interrupts (Conor Dooley) - Fix interrupt handling race (Daire McNamara) NVIDIA Tegra194 PCIe controller driver: - Drop tegra194 MSI register save/restore, which is unnecessary since the DWC core does it (Jisheng Zhang) Qualcomm PCIe controller driver: - Add SM8150 SoC DT binding and support (Bhupesh Sharma) - Fix pipe clock imbalance (Johan Hovold) - Fix runtime PM imbalance on probe errors (Johan Hovold) - Fix PHY init imbalance on probe errors (Johan Hovold) - Convert DT binding to YAML (Dmitry Baryshkov) - Update DT binding to show that resets aren't required for MSM8996/APQ8096 platforms (Dmitry Baryshkov) - Add explicit register names per chipset in DT binding (Dmitry Baryshkov) - Add sc7280-specific clock and reset definitions to DT binding (Dmitry Baryshkov) Rockchip PCIe controller driver: - Fix bitmap size when searching for free outbound region (Dan Carpenter) Rockchip DesignWare PCIe controller driver: - Remove "snps,dw-pcie" from rockchip-dwc DT "compatible" property because it's not fully compatible with rockchip (Peter Geis) - Reset rockchip-dwc controller at probe (Peter Geis) - Add rockchip-dwc INTx support (Peter Geis) Synopsys DesignWare PCIe controller driver: - Return error instead of success if DMA mapping of MSI area fails (Jiantao Zhang) Miscellaneous: - Change pci_set_dma_mask() documentation references to dma_set_mask() (Alex Williamson)" * tag 'pci-v5.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (64 commits) dt-bindings: PCI: qcom: Add schema for sc7280 chipset dt-bindings: PCI: qcom: Specify reg-names explicitly dt-bindings: PCI: qcom: Do not require resets on msm8996 platforms dt-bindings: PCI: qcom: Convert to YAML PCI: qcom: Fix unbalanced PHY init on probe errors PCI: qcom: Fix runtime PM imbalance on probe errors PCI: qcom: Fix pipe clock imbalance PCI: qcom: Add SM8150 SoC support dt-bindings: pci: qcom: Document PCIe bindings for SM8150 SoC x86/PCI: Disable E820 reserved region clipping starting in 2023 x86/PCI: Disable E820 reserved region clipping via quirks x86/PCI: Add kernel cmdline options to use/ignore E820 reserved regions PCI: microchip: Fix potential race in interrupt handling PCI/AER: Clear MULTI_ERR_COR/UNCOR_RCV bits PCI: cadence: Clear FLR in device capabilities register PCI: cadence: Allow PTM Responder to be enabled PCI: vmd: Revert 2565e5b69c44 ("PCI: vmd: Do not disable MSI-X remapping if interrupt remapping is enabled by IOMMU.") PCI: vmd: Assign VMD IRQ domain before enumeration PCI: Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store() PCI: rockchip-dwc: Add legacy interrupt support ...
2022-05-24PCI: qcom: Fix unbalanced PHY init on probe errorsJohan Hovold
Undo the PHY initialisation (e.g. balance runtime PM) if host initialisation fails during probe. Link: https://lore.kernel.org/r/20220401133854.10421-3-johan+linaro@kernel.org Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # 4.5
2022-05-24PCI: qcom: Fix runtime PM imbalance on probe errorsJohan Hovold
Drop the leftover pm_runtime_disable() calls from the late probe error paths that would, for example, prevent runtime PM from being reenabled after a probe deferral. Link: https://lore.kernel.org/r/20220401133854.10421-2-johan+linaro@kernel.org Fixes: 6e5da6f7d824 ("PCI: qcom: Fix error handling in runtime PM support") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # 4.20 Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
2022-05-24PCI: qcom: Fix pipe clock imbalanceJohan Hovold
Fix a clock imbalance introduced by ed8cc3b1fc84 ("PCI: qcom: Add support for SDM845 PCIe controller"), which enables the pipe clock both in init() and in post_init() but only disables in post_deinit(). Note that the pipe clock was also never disabled in the init() error paths and that enabling the clock before powering up the PHY looks questionable. Link: https://lore.kernel.org/r/20220401133351.10113-1-johan+linaro@kernel.org Fixes: ed8cc3b1fc84 ("PCI: qcom: Add support for SDM845 PCIe controller") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: stable@vger.kernel.org # 5.6
2022-05-24PCI: qcom: Add SM8150 SoC supportBhupesh Sharma
The PCIe IP (rev 1.5.0) on SM8150 SoC is similar to the one used on SM8250. Add SM8150 support, reusing the members of ops_1_9_0. Link: https://lore.kernel.org/r/20220326060810.1797516-3-bhupesh.sharma@linaro.org Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Vinod Koul <vkoul@kernel.org>
2022-05-03PCI: qcom: Remove ddrss_sf_tbu clock from SC8180XBjorn Andersson
The Qualcomm SC8180X platform was piggy-backing on the SM8250 qcom_pcie_cfg, but SC8180X doesn't have the ddrss_sf_tbu clock, so it now fails to probe due to the missing clock. Give SC8180X its own qcom_pcie_cfg, without the ddrss_sf_tbu flag set. Fixes: 0614f98bbb9f ("PCI: qcom: Add ddrss_sf_tbu flag") Link: https://lore.kernel.org/r/20220331013415.592748-1-bjorn.andersson@linaro.org Tested-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-03-22Merge branch 'remotes/lorenzo/pci/qcom'Bjorn Helgaas
- Save pointer to device match data instead of copying it (Dmitry Baryshkov) - Add ddrss_sf_tbu flag to device match data instead of checking OF compatible string (Dmitry Baryshkov) - Add SM8450 SoC PCIe DT bindings (Dmitry Baryshkov) - Add SM8450 PCIe support (Dmitry Baryshkov) * remotes/lorenzo/pci/qcom: PCI: qcom: Add SM8450 PCIe support PCI: qcom: Add ddrss_sf_tbu flag PCI: qcom: Remove redundancy between qcom_pcie and qcom_pcie_cfg dt-bindings: pci: qcom: Document PCIe bindings for SM8450
2022-02-23PCI: qcom: Add SM8450 PCIe supportDmitry Baryshkov
On SM8450 platform PCIe hosts do not use all the clocks (and add several additional clocks), so expand the driver to handle these requirements. PCIe0 and PCIe1 hosts use different sets of clocks, so separate entries are required. Link: https://lore.kernel.org/r/20220223101435.447839-5-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-02-23PCI: qcom: Add ddrss_sf_tbu flagDmitry Baryshkov
Qualcomm PCIe driver uses compatible string to check if the ddrss_sf_tbu clock should be used. Since sc7280 support has added flags, switch to the new mechanism to check if this clock should be used. Link: https://lore.kernel.org/r/20220223101435.447839-4-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-02-23PCI: qcom: Remove redundancy between qcom_pcie and qcom_pcie_cfgDmitry Baryshkov
In preparation to adding more flags to configuration data, use pointer to struct qcom_pcie_cfg directly inside struct qcom_pcie, rather than duplicating all its fields. This would save us from the boilerplate code that just copies flag values from one struct to another one. Link: https://lore.kernel.org/r/20220223101435.447839-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-02-17PCI: Add defines for normal and subtractive PCI bridgesPali Rohár
Add these PCI class codes to pci_ids.h: PCI_CLASS_BRIDGE_PCI_NORMAL PCI_CLASS_BRIDGE_PCI_SUBTRACTIVE Use these defines in all kernel code for describing PCI class codes for normal and subtractive PCI bridges. [bhelgaas: similar change in pci-mvebu.c] Link: https://lore.kernel.org/r/20220214114109.26809-1-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-12-06PCI: qcom: Use __be16 type to store return value from cpu_to_be16()Manivannan Sadhasivam
cpu_to_be16() returns __be16 value but the driver uses u16 and that's incorrect. Fix it by using __be16 as the data type of bdf_be variable. The issue was spotted by the below sparse warning: sparse warnings: (new ones prefixed by >>) >> drivers/pci/controller/dwc/pcie-qcom.c:1305:30: sparse: sparse: incorrect type in initializer (different base types) @@ expected unsigned short [usertype] bdf_be @@ got restricted __be16 [usertype] @@ drivers/pci/controller/dwc/pcie-qcom.c:1305:30: sparse: expected unsigned short [usertype] bdf_be drivers/pci/controller/dwc/pcie-qcom.c:1305:30: sparse: got restricted __be16 [usertype] Link: https://lore.kernel.org/r/20211130080924.266116-1-manivannan.sadhasivam@linaro.org Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
2021-11-29PCI: qcom: Fix an error handling path in 'qcom_pcie_probe()'Christophe JAILLET
If 'of_device_get_match_data()' fails, previous 'pm_runtime_get_sync()/ pm_runtime_enable()' should be undone. To fix it, the easiest is to move this block of code before the memory allocations and the pm_runtime_xxx calls. Link: https://lore.kernel.org/r/4d03c636193f64907c8dacb17fa71ed05fd5f60c.1636220582.git.christophe.jaillet@wanadoo.fr Fixes: b89ff410253d ("PCI: qcom: Replace ops with struct pcie_cfg in pcie match data") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
2021-10-15PCI: qcom: Add sc8180x compatibleBjorn Andersson
The SC8180x platform comes with 4 PCIe controllers, typically used for things such as NVME storage or connecting a SDX55 5G modem. Add a compatible for this, that just reuses the 1.9.0 ops. Link: https://lore.kernel.org/linux-arm-msm/20210725040038.3966348-4-bjorn.andersson@linaro.org/ Link: https://lore.kernel.org/r/20210823154958.305677-2-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> [lorenzo.pieralisi@arm.com: updated match data structure] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2021-10-14PCI: qcom: Switch pcie_1_pipe_clk_src after PHY init in SC7280Prasad Malisetty
On the SC7280, the clock source for gcc_pcie_1_pipe_clk_src must be the TCXO while gdsc is enabled. After PHY init successful clock source should switch to pipe clock for gcc_pcie_1_pipe_clk_src. Link: https://lore.kernel.org/r/1633628923-25047-6-git-send-email-pmaliset@codeaurora.org Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
2021-10-14PCI: qcom: Replace ops with struct pcie_cfg in pcie match dataPrasad Malisetty
Add struct qcom_pcie_cfg as match data for all platforms. Assign appropriate platform ops into struct qcom_pcie_cfg and read using of_device_get_match_data() in qcom_pcie_probe(). Link: https://lore.kernel.org/r/1633628923-25047-5-git-send-email-pmaliset@codeaurora.org Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
2021-02-24PCI: qcom: Use PHY_REFCLK_USE_PAD only for ipq8064Ansuel Smith
The use of PHY_REFCLK_USE_PAD introduced a regression for apq8064 devices. It was tested that while apq doesn't require the padding, ipq SoC must use it or the kernel hangs on boot. Link: https://lore.kernel.org/r/20201019165555.8269-1-ansuelsmth@gmail.com Fixes: de3c4bf64897 ("PCI: qcom: Add support for tx term offset for rev 2.1.0") Reported-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # v4.19+
2021-02-24PCI: qcom: Add support for ddrss_sf_tbu clockDmitry Baryshkov
On SM8250 additional clock is required for PCIe devices to access NOC. Update PCIe controller driver to control this clock. Link: https://lore.kernel.org/r/20210117013114.441973-3-dmitry.baryshkov@linaro.org Fixes: e1dd639e374a ("PCI: qcom: Add SM8250 SoC support") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2020-12-09PCI: qcom: Add support for configuring BDF to SID mapping for SM8250Manivannan Sadhasivam
For SM8250, we need to write the BDF to SID mapping in PCIe controller register space for proper working. This is accomplished by extracting the BDF and SID values from "iommu-map" property in DT and writing those in the register address calculated from the hash value of BDF. In case of collisions, the index of the next entry will also be written. For the sake of it, let's introduce a "config_sid" callback and do it conditionally for SM8250. Link: https://lore.kernel.org/r/20201208121402.178011-4-mani@kernel.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-12-08PCI: qcom: Add SM8250 SoC supportManivannan Sadhasivam
The PCIe IP (rev 1.9.0) on SM8250 SoC is similar to the one used on SDM845. Hence the support is added reusing the members of ops_2_7_0. The key difference between ops_2_7_0 and ops_1_9_0 is the config_sid callback, which will be added in successive commit. Link: https://lore.kernel.org/r/20201208121402.178011-3-mani@kernel.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-19PCI: dwc: Move dw_pcie_setup_rc() to DWC common codeRob Herring
All RC complex drivers must call dw_pcie_setup_rc(). The ordering of the call shouldn't be too important other than being after any RC resets. There's a few calls of dw_pcie_setup_rc() left as drivers implementing suspend/resume need it. Link: https://lore.kernel.org/r/20201105211159.1814485-13-robh@kernel.org Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Minghuan Lian <minghuan.Lian@nxp.com> Cc: Mingkai Hu <mingkai.hu@nxp.com> Cc: Roy Zang <roy.zang@nxp.com> Cc: Yue Wang <yue.wang@Amlogic.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Xiaowei Song <songxiaowei@hisilicon.com> Cc: Binghui Wang <wangbinghui@hisilicon.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@axis.com Cc: linux-arm-msm@vger.kernel.org
2020-11-19PCI: dwc: Move dw_pcie_msi_init() into coreRob Herring
The host drivers which call dw_pcie_msi_init() are all the ones using the built-in MSI controller, so let's move it into the common DWC code. Link: https://lore.kernel.org/r/20201105211159.1814485-12-robh@kernel.org Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Yue Wang <yue.wang@Amlogic.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Xiaowei Song <songxiaowei@hisilicon.com> Cc: Binghui Wang <wangbinghui@hisilicon.com> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@axis.com Cc: linux-arm-msm@vger.kernel.org Cc: linux-tegra@vger.kernel.org
2020-11-19PCI: dwc: Move link handling into common codeRob Herring
All the DWC drivers do link setup and checks at roughly the same time. Let's use the existing .start_link() hook (currently only used in EP mode) and move the link handling to the core code. The behavior for a link down was inconsistent as some drivers would fail probe in that case while others succeed. Let's standardize this to succeed as there are usecases where devices (and the link) appear later even without hotplug. For example, a reconfigured FPGA device. Link: https://lore.kernel.org/r/20201105211159.1814485-11-robh@kernel.org Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Yue Wang <yue.wang@Amlogic.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Xiaowei Song <songxiaowei@hisilicon.com> Cc: Binghui Wang <wangbinghui@hisilicon.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@axis.com Cc: linux-arm-msm@vger.kernel.org Cc: linux-tegra@vger.kernel.org
2020-11-19PCI: dwc: Move MSI interrupt setup into DWC common codeRob Herring
Platforms using the built-in DWC MSI controller all have a dedicated interrupt with "msi" name or at index 0, so let's move setting up the interrupt to the common DWC code. spear13xx and dra7xx are the 2 oddballs with muxed interrupts, so we need to prevent configuring the MSI interrupt by setting msi_irq to negative. Link: https://lore.kernel.org/r/20201105211159.1814485-9-robh@kernel.org Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Yue Wang <yue.wang@Amlogic.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Xiaowei Song <songxiaowei@hisilicon.com> Cc: Binghui Wang <wangbinghui@hisilicon.com> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: linux-samsung-soc@vger.kernel.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@axis.com Cc: linux-arm-msm@vger.kernel.org Cc: linux-tegra@vger.kernel.org
2020-11-19PCI: dwc: Move "dbi", "dbi2", and "addr_space" resource setup into common codeRob Herring
Most DWC drivers use the common register resource names "dbi", "dbi2", and "addr_space", so let's move their setup into the DWC common code. This means 'dbi_base' in particular is setup later, but it looks like no drivers touch DBI registers before dw_pcie_host_init or dw_pcie_ep_init. Link: https://lore.kernel.org/r/20201105211159.1814485-4-robh@kernel.org Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Minghuan Lian <minghuan.Lian@nxp.com> Cc: Mingkai Hu <mingkai.hu@nxp.com> Cc: Roy Zang <roy.zang@nxp.com> Cc: Jonathan Chocron <jonnyc@amazon.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Xiaowei Song <songxiaowei@hisilicon.com> Cc: Binghui Wang <wangbinghui@hisilicon.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: linux-omap@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-arm-kernel@axis.com Cc: linux-arm-msm@vger.kernel.org Cc: linux-tegra@vger.kernel.org
2020-10-21Merge branch 'remotes/lorenzo/pci/qcom'Bjorn Helgaas
- Make sure PCIe is reset before init to work around QSDK U-Boot issue (Ansuel Smith) - Set iproc affinity mask on MSI interrupts (Mark Tomlinson) * remotes/lorenzo/pci/qcom: PCI: qcom: Make sure PCIe is reset before init for rev 2.1.0
2020-09-10PCI: dwc: Centralize link gen settingRob Herring
keystone would force gen2 if no DT property. Now it relies on the PCI_EXP_LNKCAP value. Link: https://lore.kernel.org/r/20200821035420.380495-35-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: linux-omap@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-tegra@vger.kernel.org
2020-09-08PCI: dwc/qcom: Use common PCI register definitionsRob Herring
The QCom driver has its own defines for common PCI config space registers. It also hard codes the capability register offsets which are discoverable. Convert it to use the standard register definitions. Link: https://lore.kernel.org/r/20200821035420.380495-30-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-arm-msm@vger.kernel.org
2020-09-08PCI: dwc: Check CONFIG_PCI_MSI inside dw_pcie_msi_init()Rob Herring
Move the IS_ENABLED(CONFIG_PCI_MSI) check into dw_pcie_msi_init() instead of duplicating it in all the drivers. Link: https://lore.kernel.org/r/20200821035420.380495-22-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Yue Wang <yue.wang@Amlogic.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Xiaowei Song <songxiaowei@hisilicon.com> Cc: Binghui Wang <wangbinghui@hisilicon.com> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@axis.com Cc: linux-arm-msm@vger.kernel.org
2020-09-07PCI: qcom: Make sure PCIe is reset before init for rev 2.1.0Ansuel Smith
Qsdk U-Boot can incorrectly leave the PCIe interface in an undefined state if bootm command is used instead of bootipq. This is caused by the not deinit of PCIe when bootm is called. Reset the PCIe before init anyway to fix this U-Boot bug. Link: https://lore.kernel.org/r/20200901124955.137-1-ansuelsmth@gmail.com Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: stable@vger.kernel.org # v4.19+
2020-08-05Merge branch 'remotes/lorenzo/pci/runtime-pm'Bjorn Helgaas
- Fix runtime power management imbalance for cadence, dra7xx, qcom, rcar (Dinghao Liu) * remotes/lorenzo/pci/runtime-pm: PCI: rcar: Fix runtime PM imbalance on error PCI: qcom: Fix runtime PM imbalance on error PCI: cadence: Fix runtime PM imbalance on error PCI: dwc: pci-dra7xx: Fix runtime PM imbalance on error
2020-07-17PCI: dwc: Convert to devm_platform_ioremap_resource_byname()Dejin Zheng
Use devm_platform_ioremap_resource_byname() to simplify the code since it contains platform_get_resource_byname() and devm_ioremap_resource() respectively. Link: https://lore.kernel.org/r/20200708164013.5076-1-zhengdejin5@gmail.com Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Reviewed-by: Rob Herring <robh@kernel.org>
2020-07-07PCI: qcom: Replace define with standard valueAnsuel Smith
Lots of define are actually already defined in pci_regs.h, directly use the standard defines. Link: https://lore.kernel.org/r/20200615210608.21469-13-ansuelsmth@gmail.com Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-26 08:19:50 +0000