summaryrefslogtreecommitdiff
path: root/drivers/pci/controller/dwc/pcie-tegra194.c
AgeCommit message (Collapse)Author
2024-01-15Merge branch 'pci/irq-clean-up'Bjorn Helgaas
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more explicit and match spec terminology (Bjorn Helgaas) - Use existing PCI_IRQ_INTX, PCI_IRQ_MSI, PCI_IRQ_MSIX in artpec6, cadence, designware, designware-plat, dra7xx, imx6, keembay, keystone, layerscape, mhi, ntb, qcom, rcar, rcar-gen4, rockchip, tegra194, uniphier, vntb; drop the redundant pci_epc_irq_type enum with the same values (Damien Le Moal) - Use "intx" instead of "leg" or "legacy" when describing INTx interrupts in endpoint core, endpoint tests, cadence, dra7xx, designware, dw-rockchip, dwc core, imx6, keystone, layerscape, qcom, rcar-gen4, rockchip, tegra194, uniphier, xilinx-nwl (Damien Le Moal) * pci/irq-clean-up: PCI: xilinx-nwl: Use INTX instead of legacy PCI: rockchip-host: Rename rockchip_pcie_legacy_int_handler() PCI: rockchip-ep: Use INTX instead of legacy PCI: uniphier: Use INTX instead of legacy PCI: tegra194: Use INTX instead of legacy PCI: dw-rockchip: Rename rockchip_pcie_legacy_int_handler() PCI: keystone: Use INTX instead of legacy PCI: dwc: Rename dw_pcie_ep_raise_legacy_irq() PCI: cadence: Use INTX instead of legacy PCI: dra7xx: Rename dra7xx_pcie_raise_legacy_irq() misc: pci_endpoint_test: Use INTX instead of LEGACY PCI: endpoint: Rename LEGACY to INTX in test function driver PCI: endpoint: Use INTX instead of legacy PCI: endpoint: Drop PCI_EPC_IRQ_XXX definitions PCI: Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX
2024-01-06PCI: dwc: Drop host prefix from struct dw_pcie_host_ops membersYoshihiro Shimoda
Since the name of the dw_pcie_host_ops struct makes it obvious that it's for the PCIe Host, drop the host prefix from the struct members. [kwilczynski: commit log] Suggested-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-2-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Lei Chuanhua <lchuanhua@maxlinear.com> Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
2023-12-19PCI: tegra194: Use INTX instead of legacyDamien Le Moal
In the Designware tegra194 controller driver, change all names using "legacy" to use "intx", to match the term used in the PCI specifications. Link: https://lore.kernel.org/r/20231122060406.14695-13-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
2023-12-18PCI: endpoint: Drop PCI_EPC_IRQ_XXX definitionsDamien Le Moal
linux/pci.h defines the IRQ flags PCI_IRQ_INTX, PCI_IRQ_MSI and PCI_IRQ_MSIX. Let's use these flags directly instead of the endpoint definitions provided by enum pci_epc_irq_type. This removes the need for defining this enum type completely. Link: https://lore.kernel.org/r/20231122060406.14695-3-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2023-10-28Merge branch 'pci/field-get'Bjorn Helgaas
- Use FIELD_GET()/FIELD_PREP() when possible throughout drivers/pci/ (Ilpo Järvinen, Bjorn Helgaas) - Rework DPC control programming for clarity (Ilpo Järvinen) * pci/field-get: PCI/portdrv: Use FIELD_GET() PCI/VC: Use FIELD_GET() PCI/PTM: Use FIELD_GET() PCI/PME: Use FIELD_GET() PCI/ATS: Use FIELD_GET() PCI/ATS: Show PASID Capability register width in bitmasks PCI: Use FIELD_GET() in Sapphire RX 5600 XT Pulse quirk PCI: Use FIELD_GET() PCI/MSI: Use FIELD_GET/PREP() PCI/DPC: Use defines with DPC reason fields PCI/DPC: Use defined fields with DPC_CTL register PCI/DPC: Use FIELD_GET() PCI: hotplug: Use FIELD_GET/PREP() PCI: dwc: Use FIELD_GET/PREP() PCI: cadence: Use FIELD_GET() PCI: Use FIELD_GET() to extract Link Width PCI: mvebu: Use FIELD_PREP() with Link Width PCI: tegra194: Use FIELD_GET()/FIELD_PREP() with Link Width fields # Conflicts: # drivers/pci/controller/dwc/pcie-tegra194.c
2023-10-28Merge branch 'pci/controller/speed'Bjorn Helgaas
- Use PCIE_SPEED2MBS_ENC() macro in qcom host and endpoint to encode link speed instead of hard-coding the link speed in MBps (Manivannan Sadhasivam) - Use Mbps_to_icc() (not MBps_to_icc()) in tegra194 instead of explicitly doing the bytes-to-bits conversion (Manivannan Sadhasivam) * pci/controller/speed: PCI: tegra194: Use Mbps_to_icc() macro for setting icc speed PCI: qcom-ep: Use PCIE_SPEED2MBS_ENC() macro for encoding link speed PCI: qcom: Use PCIE_SPEED2MBS_ENC() macro for encoding link speed
2023-10-24PCI: dwc: Use FIELD_GET/PREP()Ilpo Järvinen
Convert open-coded variants of PCI field access into FIELD_GET/PREP() to make the code easier to understand. Add two missing defines into pci_regs.h. Logically, the Max No-Snoop Latency Register is a separate word sized register in the PCIe spec, but the pre-existing LTR defines in pci_regs.h with dword long values seem to consider the registers together (the same goes for the only user). Thus, follow the custom and make the new values also take both word long LTR registers as a joint dword register. Link: https://lore.kernel.org/r/20231024110336.26264-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-10-20PCI: tegra194: Drop PCI_EXP_LNKSTA_NLW settingYoshihiro Shimoda
dw_pcie_setup() is already setting PCI_EXP_LNKCAP_MLW to pcie->num_lanes in the PCI_EXP_LNKCAP register for programming maximum link width. Hence, remove the redundant setting here. Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-5-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com>
2023-10-14PCI: tegra194: Use Mbps_to_icc() macro for setting icc speedManivannan Sadhasivam
PCIe speed returned by the PCIE_SPEED2MBS_ENC() macro is in Mbps. So instead of converting it to MBps explicitly and using the MBps_to_icc() macro, let's use the Mbps_to_icc() macro to pass the value directly. Link: https://lore.kernel.org/linux-pci/20231004164430.39662-3-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Cc: Vidya Sagar <vidyas@nvidia.com>
2023-10-10PCI: tegra194: Use FIELD_GET()/FIELD_PREP() with Link Width fieldsIlpo Järvinen
Use FIELD_GET() to extract PCIe Negotiated Link Width field instead of custom masking and shifting. Similarly, change custom code that misleadingly used PCI_EXP_LNKSTA_NLW_SHIFT to prepare value for PCI_EXP_LNKCAP write to use FIELD_PREP() with correct field define (PCI_EXP_LNKCAP_MLW). Link: https://lore.kernel.org/r/20230919125648.1920-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-08-29Merge branch 'pci/misc'Bjorn Helgaas
- Reorder struct pci_dev to avoid holes and reduce size (Christophe JAILLET) - Change pdev->rom_attr_enabled to single bit since it's only a boolean value (Christophe JAILLET) - Use struct_size() in pirq_convert_irt_table() instead of hand-writing it (Christophe JAILLET) - Explicitly include correct DT includes to untangle headers (Rob Herring) - Fix a DOE race between destroy_work_on_stack() and the stack-allocated task->work struct going out of scope in pci_doe() (Ira Weiny) - Use pci_dev_id() when possible instead of manually composing ID from dev->bus->number and dev->devfn (Xiongfeng Wang, Zheng Zengkai) - Move pci_create_resource_files() declarations to linux/pci.h for alpha build warnings (Arnd Bergmann) - Remove unused hotplug function declarations (Yue Haibing) - Remove unused mvebu struct mvebu_pcie.busn (Pali Rohár) - Unexport pcie_port_bus_type (Bjorn Helgaas) - Remove unnecessary sysfs ID local variable initialization (Bjorn Helgaas) - Fix BAR value printk formatting to accommodate 32-bit values (Bjorn Helgaas) - Use consistent pointer types for config access syscall get_user() and put_user() uses (Bjorn Helgaas) - Simplify AER_RECOVER_RING_SIZE definition (Bjorn Helgaas) - Simplify pci_pio_to_address() (Bjorn Helgaas) - Simplify pci_dev_driver() (Bjorn Helgaas) - Fix pci_bus_resetable(), pci_slot_resetable() name typos (Bjorn Helgaas) - Fix code and doc typos and code formatting (Bjorn Helgaas) - Tidy config space save/restore messages (Bjorn Helgaas) * pci/misc: PCI: Tidy config space save/restore messages PCI: Fix code formatting inconsistencies PCI: Fix typos in docs and comments PCI: Fix pci_bus_resetable(), pci_slot_resetable() name typos PCI: Simplify pci_dev_driver() PCI: Simplify pci_pio_to_address() PCI/AER: Simplify AER_RECOVER_RING_SIZE definition PCI: Use consistent put_user() pointer types PCI: Fix printk field formatting PCI: Remove unnecessary initializations PCI: Unexport pcie_port_bus_type PCI: mvebu: Remove unused busn member PCI: Remove unused function declarations PCI/sysfs: Move declarations to linux/pci.h PCI/P2PDMA: Use pci_dev_id() to simplify the code PCI/IOV: Use pci_dev_id() to simplify the code PCI/AER: Use pci_dev_id() to simplify the code PCI: apple: Use pci_dev_id() to simplify the code PCI/DOE: Fix destroy_work_on_stack() race PCI: Explicitly include correct DT includes x86/PCI: Use struct_size() in pirq_convert_irt_table() PCI: Change pdev->rom_attr_enabled to single bit PCI: Reorder pci_dev fields to reduce holes
2023-08-03Revert "PCI: tegra194: Enable support for 256 Byte payload"Vidya Sagar
After commit 4fb8e46c1bc4 ("PCI: tegra194: Enable support for 256 Byte payload"), we initialize MPS=256 for tegra194 Root Ports before enumerating the hierarchy. Consider an Endpoint that supports only MPS=128. In the default situation (CONFIG_PCIE_BUS_DEFAULT set and no "pci=pcie_bus_*" parameter), Linux tries to configure the MPS of every device to match the upstream bridge. If the Endpoint is directly below the Root Port, Linux can reduce the Root Port MPS to 128 to match the Endpoint. But if there's a switch in the middle, Linux doesn't reduce the Root Port MPS because other devices below the switch may already be configured with MPS larger than 128. This scenario results in uncorrectable Malformed TLP errors if the Root Port sends TLPs with payloads larger than 128 bytes. These errors can be avoided by using the "pci=pcie_bus_safe" parameter, but it doesn't seem to be a good idea to always have this parameter even for basic functionality to work. Revert commit 4fb8e46c1bc4 ("PCI: tegra194: Enable support for 256 Byte payload") so the Root Ports default to MPS=128, which all devices support. If peer-to-peer DMA is not required, one can use "pci=pcie_bus_perf" to get the benefit of larger MPS settings. [bhelgaas: commit log; kwilczynski: retain "u16 val_16" declaration at the top, add missing acked by tag] Fixes: 4fb8e46c1bc4 ("PCI: tegra194: Enable support for 256 Byte payload") Link: https://lore.kernel.org/linux-pci/20230619102604.3735001-1-vidyas@nvidia.com Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Acked-by: Jon Hunter <jonathanh@nvidia.com> Cc: stable@vger.kernel.org # v6.0-rc1+
2023-07-18PCI: Explicitly include correct DT includesRob Herring
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Link: https://lore.kernel.org/r/20230714174827.4061572-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-06-30Merge tag 'pci-v6.5-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Export pcie_retrain_link() for use outside ASPM - Add Data Link Layer Link Active Reporting as another way for pcie_retrain_link() to determine the link is up - Work around link training failures (especially on the ASMedia ASM2824 switch) by training first at 2.5GT/s and then attempting higher rates Resource management: - When we coalesce host bridge windows, remove invalidated resources from the resource tree so future allocations work correctly Hotplug: - Cancel bringup sequence if card is not present, to keep from blinking Power Indicator indefinitely - Reassign bridge resources if necessary for ACPI hotplug Driver binding: - Convert platform_device .remove() callbacks to return void instead of a mostly useless int Power management: - Reduce wait time for secondary bus to be ready to speed up resume - Avoid putting EloPOS E2/S2/H2 (as well as Elo i2) PCIe Ports in D3cold - Call _REG when transitioning D-states so AML that uses the PCI config space OpRegion works, which fixes some ASMedia GPIO controllers after resume Virtualization: - Delay extra 250ms after FLR of Solidigm P44 Pro NVMe to avoid KVM hang when guest is rebooted - Add function 1 DMA alias quirk for Marvell 88SE9235 Error handling: - Unexport pci_save_aer_state() since it's only used in drivers/pci/ - Drop recommendation for drivers to configure AER Capability, since the PCI core does this for all devices ASPM: - Disable ASPM on MFD function removal to avoid use-after-free - Tighten up pci_enable_link_state() and pci_disable_link_state() interfaces so they don't enable/disable states the driver didn't specify - Avoid link retraining race that can happen if ASPM sets link control parameters while the link is in the midst of training for some other reason Endpoint framework: - Change "PCI Endpoint Virtual NTB driver" Kconfig prompt to be different from "PCI Endpoint NTB driver" - Automatically create a function specific attributes group for endpoint drivers to avoid reference counting issues - Fix many EPC test issues - Return pci_epf_type_add_cfs() error if EPF has no driver - Add kernel-doc for pci_epc_raise_irq() and pci_epc_map_msi_irq() MSI vector parameters - Pass EPF device ID to driver probe functions - Return -EALREADY if EPC has already been started/stopped - Add linkdown notifier support and use it in qcom-ep - Add Bus Master Enable event support and use it in qcom-ep - Add Qualcomm Modem Host Interface (MHI) endpoint driver - Add Layerscape PME interrupt handling to manage link-up notification Cadence PCIe controller driver: - Wait for link retrain to complete when working around the J721E i2085 erratum with Gen2 mode Faraday FTPC100 PCI controller driver: - Release clock resources on error paths Freescale i.MX6 PCIe controller driver: - Save and restore Root Port MSI control to work around hardware defect Intel VMD host bridge driver: - Reset VMD config register between soft reboots - Capture pci_reset_bus() return value instead of printing junk when it fails Qualcomm PCIe controller driver: - Add SDX65 endpoint compatible string to DT binding - Disable register write access after init for IP v2.3.3, v2.9.0 - Use DWC helpers for enabling/disabling writes to DBI registers - Hide slot hotplug capability for IP v1.0.0, v1.9.0, v2.1.0, v2.3.2, v2.3.3, v2.7.0, v2.9.0 - Reuse v2.3.2 post-init sequence for v2.4.0 Renesas R-Car PCIe controller driver: - Remove unused static pcie_base and pcie_dev Rockchip PCIe controller driver: - Remove writes to unused registers - Write endpoint Device ID using correct register - Assert PCI Configuration Enable bit after probe so endpoint responds instead of generating Request Retry Status messages - Poll waiting for PHY PLLs to lock - Update RK3399 example DT binding to be valid - Use RK3399 PCIE_CLIENT_LEGACY_INT_CTRL to generate INTx instead of manually generating PCIe message - Use multiple windows to avoid address translation conflicts - Use u32 (not u16) when accessing 32-bit registers - Hide MSI-X Capability, since RK3399 can't generate MSI-X - Set endpoint controller required alignment to 256 Synopsys DesignWare PCIe controller driver: - Wait for link to come up only if we've initiated link training Miscellaneous: - Add pci_clear_master() stub for non-CONFIG_PCI" * tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits) Documentation: PCI: correct spelling PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain() PCI: xgene-msi: Convert to platform remove callback returning void PCI: tegra: Convert to platform remove callback returning void PCI: rockchip-host: Convert to platform remove callback returning void PCI: mvebu: Convert to platform remove callback returning void PCI: mt7621: Convert to platform remove callback returning void PCI: mediatek-gen3: Convert to platform remove callback returning void PCI: mediatek: Convert to platform remove callback returning void PCI: iproc: Convert to platform remove callback returning void PCI: hisi-error: Convert to platform remove callback returning void PCI: dwc: Convert to platform remove callback returning void PCI: j721e: Convert to platform remove callback returning void PCI: brcmstb: Convert to platform remove callback returning void PCI: altera-msi: Convert to platform remove callback returning void PCI: altera: Convert to platform remove callback returning void PCI: aardvark: Convert to platform remove callback returning void PCI: rcar: Use correct product family name for Renesas R-Car PCI: layerscape: Add the endpoint linkup notifier support PCI: endpoint: pci-epf-vntb: Fix typo in comments ...
2023-06-24PCI: dwc: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert the dwc drivers from always returning zero in the remove callback to the void returning variant. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20230321193208.366561-7-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Acked-by: Serge Semin <fancer.lancer@gmail.com>
2023-05-16PCI: tegra194: Add interconnect support in Tegra234Sumit Gupta
Add support to request DRAM bandwidth (BW) with Memory Interconnect in Tegra234 SoC. The DRAM BW required for different modes depends on the link speed (Gen-1/2/3/4) and width/lanes (x1/x2/x4/x8). Currently, the DRAM frequency is always set to the maximum available but that results in the highest power consumption. The Memory Interconnect is a software feature which uses Interconnect framework (ICC). It adds the capability for Memory Controller (MC) clients to request bandwidth and therefore scale DRAM frequency dynamically depending on the required link speed so that the DRAM energy consumption can be optimized. Suggested-by: Manikanta Maddireddy <mmaddireddy@nvidia.com> Signed-off-by: Sumit Gupta <sumitg@nvidia.com> Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-05-16PCI: tegra194: Fix possible array out of bounds accessSumit Gupta
Add check to fix the possible array out of bounds violation by making speed equal to GEN1_CORE_CLK_FREQ when its value is more than the size of "pcie_gen_freq" array. This array has size of four but possible speed (CLS) values are from "0 to 0xF". So, "speed - 1" values are "-1 to 0xE". Suggested-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Sumit Gupta <sumitg@nvidia.com> Link: https://lore.kernel.org/lkml/72b9168b-d4d6-4312-32ea-69358df2f2d0@nvidia.com/ Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-02-14PCI: tegra194: Move dw_pcie_ep_linkup() to threaded IRQ handlerManivannan Sadhasivam
dw_pcie_ep_linkup() may take more time to execute depending on the EPF driver implementation. Calling this API in the hard IRQ handler is not encouraged since the hard IRQ handlers are supposed to complete quickly. So move the dw_pcie_ep_linkup() call to threaded IRQ handler. Link: https://lore.kernel.org/linux-pci/20230124071158.5503-3-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
2022-11-10PCI: Remove unnecessary <linux/of_irq.h> includesBjorn Helgaas
Many host controller drivers #include <linux/of_irq.h> even though they don't need it. Remove the unnecessary #includes. Link: https://lore.kernel.org/r/20221031153954.1163623-6-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Roy Zang <roy.zang@nxp.com>
2022-08-04Merge branch 'pci/ctrl/tegra194'Bjorn Helgaas
- Fix tegra_pcie_config_ep() power management in error path (Miaoqian Lin) - Convert DT binding to json-schema (Vidya Sagar) - Add DT bindings and driver support for Tegra234 Root Port and Endpoint mode (Vidya Sagar) - Disable MSI for Tegra234 Root Ports so they use INTx for all events (PCIe doesn't allow mixing INTx and MSI/MSI-X) (Vidya Sagar) - Search for Vendor-Specific RAS-DEC capability instead of hard-coding offset (Vidya Sagar) - Fix unintentional APPL_INTR_STATUS_L0 value overwrite in Root Port interrupt handling (Vidya Sagar) - Clear Bandwidth Management interrupt status bit to avoid interrupt storm (Vidya Sagar) - Set default Max Payload Size to 256 bytes (Vidya Sagar) - Fix offset when clearing bit in Data Link Feature capability (Vidya Sagar) - Extend Endpoint mode support to devices beyond Controller-5 (Vidya Sagar) * pci/ctrl/tegra194: PCI: tegra194: Add Tegra234 PCIe support PCI: tegra194: Extend Endpoint mode support PCI: tegra194: Fix link up retry sequence PCI: tegra194: Clean up the exit path for Endpoint mode PCI: tegra194: Enable support for 256 Byte payload PCI: tegra194: Clear bandwidth management status PCI: tegra194: Fix Root Port interrupt handling PCI: tegra194: Find RAS DES PCIe capability offset Revert "PCI: tegra194: Rename tegra_pcie_dw to tegra194_pcie" PCI: Disable MSI for Tegra234 Root Ports dt-bindings: PCI: tegra234: Add schema for tegra234 Endpoint mode dt-bindings: PCI: tegra234: Add schema for tegra234 Root Port mode dt-bindings: PCI: tegra194: Convert to json-schema PCI: tegra194: Fix PM error handling in tegra_pcie_config_ep() # Conflicts: # drivers/pci/controller/dwc/pcie-designware.h # drivers/pci/controller/dwc/pcie-tegra194.c
2022-08-04Merge branch 'pci/ctrl/qcom'Bjorn Helgaas
- Add PHY clock source implementation (Dmitry Baryshkov) - Use new clk_regmap_phy_mux_ops for gcc-sm8450 and gcc-sc7280 PCIe pipe clocks (Dmitry Baryshkov) - Set up rev 2.1.0 PARF_PHY before enabling clocks (Christian Marangi) - Power on PHY before accessing IPQ8074 DBI registers to avoid boot hangs (Robert Marko) - Power on PHY before accessing DBI registers on all variants for consistency (Robert Marko) - Remove unnecessary pipe_clk handling since this is done in PHY drivers (Dmitry Baryshkov) - Drop manual pipe_clk_src handling (Dmitry Baryshkov) - Move GEN3_RELATED DBI definitions to common dwc header (Baruch Siach) - Define slot capabilities using generic PCI_EXP_SLTCAP_* macros (Baruch Siach) - Add IPQ60xx support (Selvam Sathappan Periakaruppan) - Fix DT description typo (Baruch Siach) - Fix DT "compatibles" typo (Johan Hovold) - Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru) * pci/ctrl/qcom: PCI: qcom: Allow ASPM L1 and substates for 2.7.0 dt-bindings: PCI: qcom: Fix reset conditional dt-bindings: PCI: qcom: Fix description typo PCI: qcom: Add IPQ60xx support PCI: qcom: Define slot capabilities using PCI_EXP_SLTCAP_* PCI: dwc: Move GEN3_RELATED DBI definitions to common header PCI: qcom: Drop manual pipe_clk_src handling PCI: qcom: Remove unnecessary pipe_clk handling PCI: qcom: Power on PHY before DBI register accesses PCI: qcom: Power on PHY before IPQ8074 DBI register accesses PCI: qcom: Set up rev 2.1.0 PARF_PHY before enabling clocks clk: qcom: gcc-sc7280: use new clk_regmap_phy_mux_ops for PCIe pipe clocks clk: qcom: gcc-sm8450: use new clk_regmap_phy_mux_ops for PCIe pipe clocks clk: qcom: regmap: add PHY clock source implementation
2022-08-01PCI: dwc: Convert struct pcie_port.msi_irq to an arrayDmitry Baryshkov
The Qualcomm DWC PCIe controller supports more than 32 MSI interrupts, but they are routed to separate interrupts in groups of 32 vectors. To support this configuration, change the msi_irq field to an array. Let the DWC core handle all interrupts that were set in this array. [bhelgaas: reorder, drop "irq" temporary to make patch cleaner] Link: https://lore.kernel.org/r/20220707134733.2436629-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: tegra194: Drop manual DW PCIe controller version setupSerge Semin
Since the DW PCIe common code (dw_pcie_version_detect()) now reads the IP core version directly from the hardware, there is no point manually setting the version for controllers newer than v4.70a. Tegra194 only supports v4.90a, so remove the now-superfluous code that sets struct dw_pcie.version. Suggested-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220624143947.8991-8-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01PCI: dwc: Use native DWC IP core version representationSerge Semin
Save the DWC IP core version in the same format as the PORT_LOGIC.PCIE_VERSION_OFF register, similar to what other drivers for DWC IP do (dw_spi_hw_init(), dwc3_core_is_valid(), stmmac_hwif_init()). [bhelgaas: trim commit log] Link: https://lore.kernel.org/r/20220624143947.8991-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-07-22PCI: tegra194: Add Tegra234 PCIe supportVidya Sagar
Add support for Synopsys DesignWare core IP based PCIe host controllers present in the Tegra234 SoC. Link: https://lore.kernel.org/r/20220721142052.25971-17-vidyas@nvidia.com Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-22PCI: tegra194: Extend Endpoint mode supportVidya Sagar
Since only Controller-5 can be used in the Endpoint mode in P2972-0000 platform, support is available only for Controller-5. Extend that support by enabling the Endpoint mode capable controller during initialization which otherwise is not required if it is only Controller-5. Link: https://lore.kernel.org/r/20220721142052.25971-16-vidyas@nvidia.com Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-22PCI: tegra194: Fix link up retry sequenceVidya Sagar
Add the missing DLF capability offset while clearing DL_FEATURE_EXCHANGE_EN bit during link up retry. Link: https://lore.kernel.org/r/20220721142052.25971-15-vidyas@nvidia.com Fixes: 56e15a238d92 ("PCI: tegra: Add Tegra194 PCIe support") Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-22PCI: tegra194: Clean up the exit path for Endpoint modeVidya Sagar
Clean up the exit path during .remove() and .shutdown() calls when in Endpoint mode. Link: https://lore.kernel.org/r/20220721142052.25971-14-vidyas@nvidia.com Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-22PCI: tegra194: Enable support for 256 Byte payloadVidya Sagar
Set 256 byte payload as the default in the Device Control Register to allow the PCIe subsystem to enable 256 byte Max Payload Size when a capable link partner is connected. Link: https://lore.kernel.org/r/20220721142052.25971-13-vidyas@nvidia.com Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-22PCI: tegra194: Clear bandwidth management statusVidya Sagar
In the event of a bandwidth management interrupt, clear the bandwidth management status in the configuration space also along with clearing corresponding status in the application logic register to avoid slew of interrupts. Link: https://lore.kernel.org/r/20220721142052.25971-12-vidyas@nvidia.com Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-22PCI: tegra194: Fix Root Port interrupt handlingVidya Sagar
As part of Root Port interrupt handling, level-0 register is read first and based on the bits set in that, corresponding level-1 registers are read for further interrupt processing. Since both these values are currently read into the same 'val' variable, checking level-0 bits the second time around is happening on the 'val' variable value of level-1 register contents instead of freshly reading the level-0 value again. Fix by using different variables to store level-0 and level-1 registers contents. Link: https://lore.kernel.org/r/20220721142052.25971-11-vidyas@nvidia.com Fixes: 56e15a238d92 ("PCI: tegra: Add Tegra194 PCIe support") Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-22PCI: tegra194: Find RAS DES PCIe capability offsetVidya Sagar
Find RAS DES PCIe capability offset instead of hardcoding the offset for each controller. Link: https://lore.kernel.org/r/20220721142052.25971-10-vidyas@nvidia.com Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-22Revert "PCI: tegra194: Rename tegra_pcie_dw to tegra194_pcie"Vidya Sagar
This reverts commit b572569183993b68dec0e990b33641e6f77744ba. Revert b57256918399 ("PCI: tegra194: Rename tegra_pcie_dw to tegra194_pcie") to keep the names of data structures generic and not contain any one particular chip name. This is a preparatory change for the upcoming changes that add support for Tegra234. This has no functional impact. Link: https://lore.kernel.org/r/20220721142052.25971-9-vidyas@nvidia.com Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-15PCI: dwc: Move GEN3_RELATED DBI definitions to common headerBaruch Siach
These are common dwc macros that will be used for other platforms. Link: https://lore.kernel.org/r/1c2d5a7a139be81fa15f356b2380163dbdebdc09.1655799816.git.baruch@tkos.co.il Signed-off-by: Baruch Siach <baruch.siach@siklu.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org>
2022-07-05PCI: dwc: Rename struct pcie_port to dw_pcie_rpSerge Semin
All of the DW PCIe core driver entities except the pcie_port struct have names with the "dw_" prefix to distinguish local and common PCIe name spaces, and endpoint-related entities have an "_ep" suffix. Rename struct pcie_port to dw_pcie_rp to make it more consistent with other names. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20220624143428.8334-16-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
2022-06-08PCI: tegra194: Fix PM error handling in tegra_pcie_config_ep()Miaoqian Lin
pm_runtime_enable() will increase power disable depth. If dw_pcie_ep_init() fails, we should use pm_runtime_disable() to balance it with pm_runtime_enable(). Add missing pm_runtime_disable() for tegra_pcie_config_ep(). Fixes: c57247f940e8 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194") Link: https://lore.kernel.org/r/20220602031910.55859-1-linmq006@gmail.com Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
2022-04-11PCI: tegra194: Remove unnecessary MSI enable reg save and restoreJisheng Zhang
The integrated MSI Receiver enable register is always initialized in dw_pcie_setup_rc() which is also called in resume code path, so we don't need to save/restore the enable register during suspend/resume. Link: https://lore.kernel.org/r/20211226074910.2722-1-jszhang@kernel.org Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Vidya Sagar <vidyas@nvidia.com>
2022-01-03PCI: tegra194: Rename tegra_pcie_dw to tegra194_pcieFan Fei
Rename tegra_pcie_dw to tegra194_pcie to match the convention of <driver>_pcie. No functional change intended. [bhelgaas: rename functions similarly] Link: https://lore.kernel.org/r/20211223011054.1227810-20-helgaas@kernel.org Signed-off-by: Fan Fei <ffclaire1224@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com>
2021-08-04PCI: tegra194: Cleanup unused codeOm Prakash Singh
Remove unused code from function tegra_pcie_config_ep. Link: https://lore.kernel.org/r/20210623100525.19944-6-omp@nvidia.com Signed-off-by: Om Prakash Singh <omp@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Vidya Sagar <vidyas@nvidia.com>
2021-08-04PCI: tegra194: Don't allow suspend when Tegra PCIe is in EP modeOm Prakash Singh
When Tegra PCIe is in endpoint mode it should be available for root port. PCIe link up by root port fails if it is in suspend state. So, don't allow Tegra to suspend when endpoint mode is enabled. Link: https://lore.kernel.org/r/20210623100525.19944-5-omp@nvidia.com Signed-off-by: Om Prakash Singh <omp@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Vidya Sagar <vidyas@nvidia.com>
2021-08-04PCI: tegra194: Disable interrupts before entering L2Om Prakash Singh
In suspend_noirq() call if link doesn't goto L2, PERST# is asserted to bring link to detect state. However, this is causing surprise link down AER error. Since Kernel is executing noirq suspend calls, AER interrupt is not processed. PME and AER are shared interrupts and PCIe subsystem driver enables wake capability of PME irq during suspend. So this AER will cause suspend failure due to pending AER interrupt. After PCIe link is in L2, interrupts are not expected since PCIe controller will be in reset state. Disable PCIe interrupts before going to L2 state to avoid pending AER interrupt. Link: https://lore.kernel.org/r/20210623100525.19944-4-omp@nvidia.com Signed-off-by: Om Prakash Singh <omp@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Vidya Sagar <vidyas@nvidia.com>
2021-08-04PCI: tegra194: Fix MSI-X programmingOm Prakash Singh
Lower order MSI-X address is programmed in MSIX_ADDR_MATCH_HIGH_OFF DBI register instead of higher order address. This patch fixes this programming mistake. Link: https://lore.kernel.org/r/20210623100525.19944-3-omp@nvidia.com Signed-off-by: Om Prakash Singh <omp@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Vidya Sagar <vidyas@nvidia.com>
2021-08-04PCI: tegra194: Fix handling BME_CHGED eventOm Prakash Singh
In tegra_pcie_ep_hard_irq(), APPL_INTR_STATUS_L0 is stored in val and again APPL_INTR_STATUS_L1_0_0 is also stored in val. So when execution reaches "if (val & APPL_INTR_STATUS_L0_PCI_CMD_EN_INT)", val is not correct. Link: https://lore.kernel.org/r/20210623100525.19944-2-omp@nvidia.com Signed-off-by: Om Prakash Singh <omp@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Vidya Sagar <vidyas@nvidia.com>
2021-07-08Merge tag 'pci-v5.14-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Fix dsm_label_utf16s_to_utf8s() buffer overrun (Krzysztof Wilczyński) - Rely on lengths from scnprintf(), dsm_label_utf16s_to_utf8s() (Krzysztof Wilczyński) - Use sysfs_emit() and sysfs_emit_at() in "show" functions (Krzysztof Wilczyński) - Fix 'resource_alignment' newline issues (Krzysztof Wilczyński) - Add 'devspec' newline (Krzysztof Wilczyński) - Dynamically map ECAM regions (Russell King) Resource management: - Coalesce host bridge contiguous apertures (Kai-Heng Feng) PCIe native device hotplug: - Ignore Link Down/Up caused by DPC (Lukas Wunner) Power management: - Leave Apple Thunderbolt controllers on for s2idle or standby (Konstantin Kharlamov) Virtualization: - Work around Huawei Intelligent NIC VF FLR erratum (Chiqijun) - Clarify error message for unbound IOV devices (Moritz Fischer) - Add pci_reset_bus_function() Secondary Bus Reset interface (Raphael Norwitz) Peer-to-peer DMA: - Simplify distance calculation (Christoph Hellwig) - Finish RCU conversion of pdev->p2pdma (Eric Dumazet) - Rename upstream_bridge_distance() and rework doc (Logan Gunthorpe) - Collect acs list in stack buffer to avoid sleeping (Logan Gunthorpe) - Use correct calc_map_type_and_dist() return type (Logan Gunthorpe) - Warn if host bridge not in whitelist (Logan Gunthorpe) - Refactor pci_p2pdma_map_type() (Logan Gunthorpe) - Avoid pci_get_slot(), which may sleep (Logan Gunthorpe) Altera PCIe controller driver: - Add Joyce Ooi as Altera PCIe maintainer (Joyce Ooi) Broadcom iProc PCIe controller driver: - Fix multi-MSI base vector number allocation (Sandor Bodo-Merle) - Support multi-MSI only on uniprocessor kernel (Sandor Bodo-Merle) Freescale i.MX6 PCIe controller driver: - Limit DBI register length for imx6qp PCIe (Richard Zhu) - Add "vph-supply" for PHY supply voltage (Richard Zhu) - Enable PHY internal regulator when supplied >3V (Richard Zhu) - Remove imx6_pcie_probe() redundant error message (Zhen Lei) Intel Gateway PCIe controller driver: - Fix INTx enable (Martin Blumenstingl) Marvell Aardvark PCIe controller driver: - Fix checking for PIO Non-posted Request (Pali Rohár) - Implement workaround for the readback value of VEND_ID (Pali Rohár) MediaTek PCIe controller driver: - Remove redundant error printing in mtk_pcie_subsys_powerup() (Zhen Lei) MediaTek PCIe Gen3 controller driver: - Add missing MODULE_DEVICE_TABLE (Zou Wei) Microchip PolarFlare PCIe controller driver: - Make struct event_descs static (Krzysztof Wilczyński) Microsoft Hyper-V host bridge driver: - Fix race condition when removing the device (Long Li) - Remove bus device removal unused refcount/functions (Long Li) Mobiveil PCIe controller driver: - Remove unused readl and writel functions (Krzysztof Wilczyński) NVIDIA Tegra PCIe controller driver: - Add missing MODULE_DEVICE_TABLE (Zou Wei) NVIDIA Tegra194 PCIe controller driver: - Fix tegra_pcie_ep_raise_msi_irq() ill-defined shift (Jon Hunter) - Fix host initialization during resume (Vidya Sagar) Rockchip PCIe controller driver: - Register IRQ handlers after device and data are ready (Javier Martinez Canillas)" * tag 'pci-v5.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits) PCI/P2PDMA: Finish RCU conversion of pdev->p2pdma PCI: xgene: Annotate __iomem pointer PCI: Fix kernel-doc formatting PCI: cpcihp: Declare cpci_debug in header file MAINTAINERS: Add Joyce Ooi as Altera PCIe maintainer PCI: rockchip: Register IRQ handlers after device and data are ready PCI: tegra194: Fix tegra_pcie_ep_raise_msi_irq() ill-defined shift PCI: aardvark: Implement workaround for the readback value of VEND_ID PCI: aardvark: Fix checking for PIO Non-posted Request PCI: tegra194: Fix host initialization during resume PCI: tegra: Add missing MODULE_DEVICE_TABLE PCI: imx6: Enable PHY internal regulator when supplied >3V dt-bindings: imx6q-pcie: Add "vph-supply" for PHY supply voltage PCI: imx6: Limit DBI register length for imx6qp PCIe PCI: imx6: Remove imx6_pcie_probe() redundant error message PCI: intel-gw: Fix INTx enable PCI: iproc: Support multi-MSI only on uniprocessor kernel PCI: iproc: Fix multi-MSI base vector number allocation PCI: mediatek-gen3: Add missing MODULE_DEVICE_TABLE PCI: Dynamically map ECAM regions ...
2021-06-28PCI: tegra194: Fix tegra_pcie_ep_raise_msi_irq() ill-defined shiftJon Hunter
tegra_pcie_ep_raise_msi_irq() shifted a signed 32-bit value left by 31 bits. The behavior of this is implementation-defined. Replace the shift by BIT(), which is well-defined. Found by cppcheck: $ cppcheck --enable=all drivers/pci/controller/dwc/pcie-tegra194.c Checking drivers/pci/controller/dwc/pcie-tegra194.c ... drivers/pci/controller/dwc/pcie-tegra194.c:1829:23: portability: Shifting signed 32-bit value by 31 bits is implementation-defined behaviour. See condition at line 1826. [shiftTooManyBitsSigned] appl_writel(pcie, (1 << irq), APPL_MSI_CTRL_1); ^ [bhelgaas: commit log] Link: https://lore.kernel.org/r/20210618160219.303092-1-jonathanh@nvidia.com Fixes: c57247f940e8 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-06-24PCI: tegra194: Fix host initialization during resumeVidya Sagar
Commit 275e88b06a27 ("PCI: tegra: Fix host link initialization") broke host initialization during resume as it misses out calling the API dw_pcie_setup_rc() which is required for host and MSI initialization. Link: https://lore.kernel.org/r/20210504172157.29712-1-vidyas@nvidia.com Fixes: 275e88b06a27 ("PCI: tegra: Fix host link initialization") Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-06-18PCI: tegra194: Fix MCFG quirk build regressionsJon Hunter
7f100744749e ("PCI: tegra: Add Tegra194 MCFG quirks for ECAM errata") caused a few build regressions: - 7f100744749e removed the Makefile rule for CONFIG_PCIE_TEGRA194, so pcie-tegra.c can no longer be built as a module. Restore that rule. - 7f100744749e added "#ifdef CONFIG_PCIE_TEGRA194" around the native driver, but that's only set when the driver is built-in (for a module, CONFIG_PCIE_TEGRA194_MODULE is defined). The ACPI quirk is completely independent of the rest of the native driver, so move the quirk to its own file and remove the #ifdef in the native driver. - 7f100744749e added symbols that are always defined but used only when CONFIG_PCIEASPM, which causes warnings when CONFIG_PCIEASPM is not set: drivers/pci/controller/dwc/pcie-tegra194.c:259:18: warning: ‘event_cntr_data_offset’ defined but not used [-Wunused-const-variable=] drivers/pci/controller/dwc/pcie-tegra194.c:250:18: warning: ‘event_cntr_ctrl_offset’ defined but not used [-Wunused-const-variable=] drivers/pci/controller/dwc/pcie-tegra194.c:243:27: warning: ‘pcie_gen_freq’ defined but not used [-Wunused-const-variable=] Fixes: 7f100744749e ("PCI: tegra: Add Tegra194 MCFG quirks for ECAM errata") Link: https://lore.kernel.org/r/20210610064134.336781-1-jonathanh@nvidia.com Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Thierry Reding <treding@nvidia.com>
2021-05-04Merge branch 'pci/tegra'Bjorn Helgaas
- Add MCFG quirks for Tegra194 ECAM errata (Vidya Sagar) * pci/tegra: PCI: tegra: Add Tegra194 MCFG quirks for ECAM errata
2021-04-16PCI: tegra: Add Tegra194 MCFG quirks for ECAM errataVidya Sagar
The PCIe controller in Tegra194 SoC is not ECAM-compliant. With the current hardware design, ECAM can be enabled only for one controller (the C5 controller) with bus numbers starting from 160 instead of 0. A different approach is taken to avoid this abnormal way of enabling ECAM for just one controller but to enable configuration space access for all the other controllers. In this approach, ops are added through MCFG quirk mechanism which access the configuration spaces by dynamically programming iATU (internal AddressTranslation Unit) to generate respective configuration accesses just like the way it is done in DesignWare core sub-system. This issue is specific to Tegra194 and it would be fixed in the future generations of Tegra SoCs. Link: https://lore.kernel.org/r/20210416134537.19474-1-vidyas@nvidia.com Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-08PCI: tegra: Fix runtime PM imbalance in pex_ep_event_pex_rst_deassert()Dinghao Liu
pm_runtime_get_sync() will increase the runtime PM counter even it returns an error. Thus a pairing decrement is needed to prevent refcount leak. Fix this by replacing this API with pm_runtime_resume_and_get(), which will not change the runtime PM counter on error. Link: https://lore.kernel.org/r/20210408072700.15791-1-dinghao.liu@zju.edu.cn Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-28 01:24:24 +0000