summaryrefslogtreecommitdiff
path: root/drivers/scsi/mpi3mr
AgeCommit message (Collapse)Author
2023-03-07scsi: mpi3mr: Fix throttle_groups memory leakTomas Henzl
Add a missing kfree(). Fixes: f10af057325c ("scsi: mpi3mr: Resource Based Metering") Signed-off-by: Tomas Henzl <thenzl@redhat.com> Link: https://lore.kernel.org/r/20230302234336.25456-2-thenzl@redhat.com Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06scsi: mpi3mr: Bad drive in topology results kernel crashRanjan Kumar
When the SAS Transport Layer support is enabled and a device exposed to the OS by the driver fails INQUIRY commands, the driver frees up the memory allocated for an internal HBA port data structure. However, in some places, the reference to the freed memory is not cleared. When the firmware sends the Device Info change event for the same device again, the freed memory is accessed and that leads to memory corruption and OS crash. Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Link: https://lore.kernel.org/r/20230228140835.4075-7-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06scsi: mpi3mr: NVMe command size greater than 8K failsRanjan Kumar
A wrong variable is checked while populating PRP entries in the PRP page and this results in failure. No PRP entries in the PRP page were successfully created and any NVMe Encapsulated commands with PRP of size greater than 8K failed. Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Link: https://lore.kernel.org/r/20230228140835.4075-6-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06scsi: mpi3mr: Return proper values for failures in firmware init pathRanjan Kumar
Return proper non-zero return values for all the cases when the controller initialization and re-initialization fails. Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Link: https://lore.kernel.org/r/20230228140835.4075-5-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06scsi: mpi3mr: Wait for diagnostic save during controller initRanjan Kumar
If a controller reset operation is triggered to recover the controller from a fault state, then wait for the snapdump to be saved in the firmware region before proceeding to reset the controller. Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Link: https://lore.kernel.org/r/20230228140835.4075-4-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06scsi: mpi3mr: Driver unload crashes host when enhanced logging is enabledRanjan Kumar
Prevent driver from trying to dereference a NULL pointer in a debug print while removing a device during driver unload. Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Link: https://lore.kernel.org/r/20230228140835.4075-3-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-06scsi: mpi3mr: ioctl timeout when disabling/enabling interruptRanjan Kumar
As part of Task Management handling, the driver will disable and enable the MSIx index zero which belongs to the Admin reply queue. During this transition the driver loses some interrupts and this leads to Admin request and ioctl timeouts. After enabling the interrupts, poll the Admin reply queue to avoid timeouts. Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Link: https://lore.kernel.org/r/20230228140835.4075-2-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-03Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull more SCSI updates from James Bottomley: "Updates that missed the first pull, mostly because of needing more soak time. Driver updates (zfcp, ufs, mpi3mr, plus two ipr bug fixes), an enclosure services (ses) update (mostly bug fixes) and other minor bug fixes and changes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits) scsi: zfcp: Trace when request remove fails after qdio send fails scsi: zfcp: Change the type of all fsf request id fields and variables to u64 scsi: zfcp: Make the type for accessing request hashtable buckets size_t scsi: ufs: core: Simplify ufshcd_execute_start_stop() scsi: ufs: core: Rely on the block layer for setting RQF_PM scsi: core: Extend struct scsi_exec_args scsi: lpfc: Fix double word in comments scsi: core: Remove the /proc/scsi/${proc_name} directory earlier scsi: core: Fix a source code comment scsi: cxgbi: Remove unneeded version.h include scsi: qedi: Remove unneeded version.h include scsi: mpi3mr: Remove unneeded version.h include scsi: mpi3mr: Fix missing mrioc->evtack_cmds initialization scsi: mpi3mr: Use number of bits to manage bitmap sizes scsi: mpi3mr: Remove unnecessary memcpy() to alltgt_info->dmi scsi: mpi3mr: Fix issues in mpi3mr_get_all_tgt_info() scsi: mpi3mr: Fix an issue found by KASAN scsi: mpi3mr: Replace 1-element array with flex-array scsi: ipr: Work around fortify-string warning scsi: ipr: Make ipr_probe_ioa_part2() return void ...
2023-02-21scsi: mpi3mr: Remove unneeded version.h includeJesper Juhl
Remove unneeded version.h include pointed out by 'make versioncheck'. Link: https://lore.kernel.org/r/820137c2-decc-3d78-f170-7f1c0571fbb7@gmail.com Signed-off-by: Jesper Juhl <jesperjuhl76@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-02-21scsi: mpi3mr: Fix missing mrioc->evtack_cmds initializationShin'ichiro Kawasaki
Commit c1af985d27da ("scsi: mpi3mr: Add Event acknowledgment logic") introduced an array mrioc->evtack_cmds but initialization of the array elements was missed. They are just zero cleared. The function mpi3mr_complete_evt_ack() refers host_tag field of the elements. Due to the zero value of the host_tag field, the function calls clear_bit() for mrico->evtack_cmds_bitmap with wrong bit index. This results in memory access to invalid address and "BUG: KASAN: use-after-free". This BUG was observed at eHBA-9600 firmware update to version 8.3.1.0. To fix it, add the missing initialization of mrioc->evtack_cmds. Link: https://lore.kernel.org/r/20230214005019.1897251-5-shinichiro.kawasaki@wdc.com Cc: stable@vger.kernel.org Fixes: c1af985d27da ("scsi: mpi3mr: Add Event acknowledgment logic") Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-02-21scsi: mpi3mr: Use number of bits to manage bitmap sizesShin'ichiro Kawasaki
To allocate bitmaps, the mpi3mr driver calculates sizes of bitmaps using byte as unit. However, bitmap helper functions assume that bitmaps are allocated using unsigned long as unit. This gap causes memory access beyond the bitmap sizes and results in "BUG: KASAN: slab-out-of-bounds". The BUG was observed at firmware download to eHBA-9600. Call trace indicated that the out-of-bounds access happened in find_first_zero_bit() called from mpi3mr_send_event_ack() for miroc->evtack_cmds_bitmap. To fix the BUG, do not use bytes to manage bitmap sizes. Instead, use number of bits, and call bitmap helper functions which take number of bits as arguments. For memory allocation, call bitmap_zalloc() instead of kzalloc() and krealloc(). For memory free, call bitmap_free() instead of kfree(). For zero clear, call bitmap_clear() instead of memset(). Remove three fields for bitmap byte sizes in struct scmd_priv which are no longer required. Replace the field dev_handle_bitmap_sz with dev_handle_bitmap_bits to keep number of bits of removepend_bitmap across resize. Link: https://lore.kernel.org/r/20230214005019.1897251-4-shinichiro.kawasaki@wdc.com Fixes: c5758fc72b92 ("scsi: mpi3mr: Gracefully handle online FW update operation") Fixes: e844adb1fbdc ("scsi: mpi3mr: Implement SCSI error handler hooks") Fixes: c1af985d27da ("scsi: mpi3mr: Add Event acknowledgment logic") Fixes: 824a156633df ("scsi: mpi3mr: Base driver code") Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-02-21scsi: mpi3mr: Remove unnecessary memcpy() to alltgt_info->dmiShin'ichiro Kawasaki
In the function mpi3mr_get_all_tgt_info(), devmap_info points to alltgt_info->dmi then there is no need to memcpy() data from devmap_info to alltgt_info->dmi. Remove the unnecessary memcpy(). This also allows to remove the local variable 'rval' and the goto label 'out'. Link: https://lore.kernel.org/r/20230214005019.1897251-3-shinichiro.kawasaki@wdc.com Cc: stable@vger.kernel.org Fixes: f5e6d5a34376 ("scsi: mpi3mr: Add support for driver commands") Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-02-21scsi: mpi3mr: Fix issues in mpi3mr_get_all_tgt_info()Shin'ichiro Kawasaki
The function mpi3mr_get_all_tgt_info() has four issues: 1) It calculates valid entry length in alltgt_info assuming the header part of the struct mpi3mr_device_map_info would equal to sizeof(u32). The correct size is sizeof(u64). 2) When it calculates the valid entry length kern_entrylen, it excludes one entry by subtracting 1 from num_devices. 3) It copies num_device by calling memcpy(). Substitution is enough. 4) It does not specify the calculated length to sg_copy_from_buffer(). Instead, it specifies the payload length which is larger than the alltgt_info size. It causes "BUG: KASAN: slab-out-of-bounds". Fix the issues by using the correct header size, removing the subtraction from num_devices, replacing the memcpy() with substitution and specifying the correct length to sg_copy_from_buffer(). Link: https://lore.kernel.org/r/20230214005019.1897251-2-shinichiro.kawasaki@wdc.com Cc: stable@vger.kernel.org Fixes: f5e6d5a34376 ("scsi: mpi3mr: Add support for driver commands") Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-02-21scsi: mpi3mr: Fix an issue found by KASANTomas Henzl
Write only correct size (32 instead of 64 bytes). Link: https://lore.kernel.org/r/20230213193752.6859-1-thenzl@redhat.com Fixes: 42fc9fee116f ("scsi: mpi3mr: Add helper functions to manage device's port") Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-12-30Merge branch '6.2/mpt-mpi' into 6.2/scsi-fixesMartin K. Petersen
Pull in Broadcom MPI/MPT fixes that conflicted with patch resolution upstream. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-12-30Merge branch '6.2/scsi-queue' into 6.2/scsi-fixesMartin K. Petersen
Pull in remaining patches from the 6.2 queue. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-12-14scsi: mpi3mr: Refer CONFIG_SCSI_MPI3MR in MakefileShin'ichiro Kawasaki
When Kconfig item CONFIG_SCSI_MPI3MR was introduced for mpi3mr driver, the Makefile of the driver was not modified to refer the Kconfig item. As a result, mpi3mr.ko is built regardless of the Kconfig item value y or m. Also, if 'make localmodconfig' can not find the Kconfig item in the Makefile, then it does not generate CONFIG_SCSI_MPI3MR=m even when mpi3mr.ko is loaded on the system. Refer to the Kconfig item to avoid the issues. Fixes: c4f7ac64616e ("scsi: mpi3mr: Add mpi30 Rev-R headers and Kconfig") Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Link: https://lore.kernel.org/r/20221207023659.2411785-1-shinichiro.kawasaki@wdc.com Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-17scsi: mpi3mr: Remove usage of dma_get_required_mask() APISreekanth Reddy
Remove the usage of dma_get_required_mask() API. Directly set the DMA mask to 63/64 if the system is a 64bit machine. Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Link: https://lore.kernel.org/r/20221111102246.19995-2-sreekanth.reddy@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-17scsi: mpi3mr: Suppress command reply debug printsShin'ichiro Kawasaki
After it receives command reply, mpi3mr driver checks command result. If the result is not zero, it prints out command information. This debug information is confusing since they are printed even when the non-zero result is expected. "Power-on or device reset occurred" is printed for Test Unit Ready command at drive detection. Inquiry failure for unsupported VPD page header is also printed. They are harmless but look like failures. To avoid the confusion, print the command reply debug information only when the module parameter logging_level has value MPI3_DEBUG_SCSI_ERROR= 64, in same manner as mpt3sas driver. Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Link: https://lore.kernel.org/r/20221111014449.1649968-1-shinichiro.kawasaki@wdc.com Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-10-22scsi: mpi3mr: Select CONFIG_SCSI_SAS_ATTRSMichal Kubecek
Starting with commit 42fc9fee116f ("scsi: mpi3mr: Add helper functions to manage device's port"), kernel configured with CONFIG_SCSI_MPI3MR=m and CONFIG_SCSI_SAS_ATTRS=n fails to build because modpost cannot find symbols used in mpi3mr_transport.c: ERROR: modpost: "sas_port_alloc_num" [drivers/scsi/mpi3mr/mpi3mr.ko] undefined! ERROR: modpost: "sas_remove_host" [drivers/scsi/mpi3mr/mpi3mr.ko] undefined! ERROR: modpost: "sas_phy_alloc" [drivers/scsi/mpi3mr/mpi3mr.ko] undefined! ERROR: modpost: "sas_phy_free" [drivers/scsi/mpi3mr/mpi3mr.ko] undefined! ... Select CONFIG_SCSI_SAS_ATTRS when CONFIG_SCSI_MPI3MR is enabled to prevent inconsistent configs. Link: https://lore.kernel.org/r/20221017145517.93BCB6043B@lion.mk-sys.cz Fixes: 42fc9fee116f ("scsi: mpi3mr: Add helper functions to manage device's port") Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-10-07Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (qla2xxx, lpfc, ufs, hisi_sas, mpi3mr, mpt3sas, target). The biggest change (from my biased viewpoint) being that the mpi3mr now attached to the SAS transport class, making it the first fusion type device to do so. Beyond the usual bug fixing and security class reworks, there aren't a huge number of core changes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits) scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername() scsi: mpi3mr: Remove unnecessary cast scsi: stex: Properly zero out the passthrough command structure scsi: mpi3mr: Update driver version to 8.2.0.3.0 scsi: mpi3mr: Fix scheduling while atomic type bug scsi: mpi3mr: Scan the devices during resume time scsi: mpi3mr: Free enclosure objects during driver unload scsi: mpi3mr: Handle 0xF003 Fault Code scsi: mpi3mr: Graceful handling of surprise removal of PCIe HBA scsi: mpi3mr: Schedule IRQ kthreads only on non-RT kernels scsi: mpi3mr: Support new power management framework scsi: mpi3mr: Update mpi3 header files scsi: mpt3sas: Revert "scsi: mpt3sas: Fix ioc->base_readl() use" scsi: mpt3sas: Revert "scsi: mpt3sas: Fix writel() use" scsi: wd33c93: Remove dead code related to the long-gone config WD33C93_PIO scsi: core: Add I/O timeout count for SCSI device scsi: qedf: Populate sysfs attributes for vport scsi: pm8001: Replace one-element array with flexible-array member scsi: 3w-xxxx: Replace one-element array with flexible-array member scsi: hptiop: Replace one-element array with flexible-array member in struct hpt_iop_request_ioctl_command() ...
2022-09-25scsi: mpi3mr: Remove unnecessary castJules Irenge
coccinelle reports a warning: WARNING: casting value returned by memory allocation function to (struct mpi3mr_throttle_group_info *) is useless To fix this, the unnecessary cast is removed. Link: https://lore.kernel.org/r/Yx+kp8NxHvDHs7dv@playground Signed-off-by: Jules Irenge <jbi.octave@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-25scsi: mpi3mr: Update driver version to 8.2.0.3.0Sreekanth Reddy
Update driver version to 8.2.0.3.0. Link: https://lore.kernel.org/r/20220912135742.11764-10-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-25scsi: mpi3mr: Fix scheduling while atomic type bugSreekanth Reddy
Fix 'scheduling while atomic' type bug, which is observed when pci_irq_vector() is called from interrupt context. Link: https://lore.kernel.org/r/20220912135742.11764-9-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-25scsi: mpi3mr: Scan the devices during resume timeSreekanth Reddy
Scan the target devices during system resume time and add or remove the target device with the SML if the corresponding target device is newly added or removed respectively. Link: https://lore.kernel.org/r/20220912135742.11764-8-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-25scsi: mpi3mr: Free enclosure objects during driver unloadSreekanth Reddy
Free the enclosure device objects during driver unload and before rescanning the target devices during controller reset. Link: https://lore.kernel.org/r/20220912135742.11764-7-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-25scsi: mpi3mr: Handle 0xF003 Fault CodeSreekanth Reddy
Handle the 0xF003 controller fault code as a special case by marking the controller as unrecoverable with logging a message indicating the driver marks the controller as unrecoverable due to the specific fault. Link: https://lore.kernel.org/r/20220912135742.11764-6-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-25scsi: mpi3mr: Graceful handling of surprise removal of PCIe HBASreekanth Reddy
Implement graceful handling of surprise or orderly removal of PCIe HBA: - Detect a hot removal of the controller at certain critical places in the driver. Early detection will help to reduce the time taken for cleaning up the hot-removed controller at the driver level. - Poll the status of the port enable issued after reset once every 5 seconds to avoid a long delay in detecting unavailable controller. Link: https://lore.kernel.org/r/20220912135742.11764-5-sreekanth.reddy@broadcom.com Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-25scsi: mpi3mr: Schedule IRQ kthreads only on non-RT kernelsSreekanth Reddy
In RT kernels, the IRQ handler's code is executed as a kernel thread. Modify the driver to avoid explicitly scheduling the IRQ kernel thread. Link: https://lore.kernel.org/r/20220912135742.11764-4-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-25scsi: mpi3mr: Support new power management frameworkSreekanth Reddy
Switch to the new generic PCI power management framework. Also, remove unnecessary calls to the PCI helper functions (such as pci_set_power_state(), pci_enable_wake(), pci_save_state(), pci_restore_state() etc). Link: https://lore.kernel.org/r/20220912135742.11764-3-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-25scsi: mpi3mr: Update mpi3 header filesSreekanth Reddy
Update the mpi3 header files. Link: https://lore.kernel.org/r/20220912135742.11764-2-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-15scsi: mpi3mr: Fix error code in mpi3mr_transport_smp_handler()Dan Carpenter
The error code from mpi3mr_post_transport_req() is supposed to be passed to bsg_job_done(job, rc, reslen), but it isn't. Link: https://lore.kernel.org/r/YyMISJzVDARpVwrr@kili Fixes: 176d4aa69c6e ("scsi: mpi3mr: Support SAS transport class callbacks") Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-15scsi: mpi3mr: Fix error codes in mpi3mr_report_manufacture()Dan Carpenter
There are three error paths which return success: 1) Propagate the error code from mpi3mr_post_transport_req() if it fails. 2) Return -EINVAL if "ioc_status != MPI3_IOCSTATUS_SUCCESS". 3) Return -EINVAL if "le16_to_cpu(mpi_reply.response_data_length) != sizeof(struct rep_manu_reply)" Link: https://lore.kernel.org/r/YyMIJh1HU2Qz9+Rs@kili Fixes: 2bd37e284914 ("scsi: mpi3mr: Add framework to issue MPT transport cmds") Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-31scsi: mpi3mr: Block I/Os while refreshing target dev objectsSreekanth Reddy
Block the I/Os on the target devices until corresponding target device's target dev objects are refreshed as part of post controller reset operation. Link: https://lore.kernel.org/r/20220804131226.16653-16-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-31scsi: mpi3mr: Refresh SAS ports during soft resetSreekanth Reddy
Update the host's SAS ports if there is change in port id or phys. If the port id is changed, then the driver updates it. If some phys are enabled/disabled during reset, then driver updates them in STL. Check for the responding expander devices and update the device handle if it got changed. Register the expander with STL if it got added during reset and unregister the expander device if it got removed during reset. [mkp: include fix for zeroday warning] Link: https://lore.kernel.org/r/20220804131226.16653-15-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22scsi: mpi3mr: Support SAS transport class callbacksSreekanth Reddy
Add support for the following SAS transport class callbacks: - get_linkerrors - get_enclosure_identifier - get_bay_identifier - phy_reset - phy_enable - set_phy_speed - smp_handler Link: https://lore.kernel.org/r/20220804131226.16653-14-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22scsi: mpi3mr: Add framework to issue MPT transport cmdsSreekanth Reddy
Add framework to issue MPT transport commands to controllers. Also issue the MPT transport commands to get the manufacturing info of SAS expander device. Link: https://lore.kernel.org/r/20220804131226.16653-13-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22scsi: mpi3mr: Add SAS SATA end devices to STLSreekanth Reddy
Register/unregister the SAS, SATA devices to SCSI Transport Layer(STL) whenever the corresponding device is added/removed from topology. Link: https://lore.kernel.org/r/20220804131226.16653-12-sreekanth.reddy@broadcom.com Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22scsi: mpi3mr: Get target object based on rphySreekanth Reddy
When device is registered with the STL then get the corresponding device's target object using the rphy in below callback functions: - mpi3mr_target_alloc() - mpi3mr_slave_alloc() - mpi3mr_slave_configure() - mpi3mr_slave_destroy() Link: https://lore.kernel.org/r/20220804131226.16653-11-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22scsi: mpi3mr: Add expander devices to STLSreekanth Reddy
Register/unregister the expander devices to SCSI Transport Layer(STL) whenever the corresponding expander is added/removed from topology. Link: https://lore.kernel.org/r/20220804131226.16653-10-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22scsi: mpi3mr: Enable STL on HBAs where multipath is disabledSreekanth Reddy
Register the SAS, SATA devices to SCSI Transport Layer (STL) only if multipath capability is disabled in the controller's firmware. Link: https://lore.kernel.org/r/20220804131226.16653-9-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22scsi: mpi3mr: Add helper functions to manage device's portSreekanth Reddy
Add the following helper functions: - Update the host phys with STL - Remove the device's SAS port with STL Link: https://lore.kernel.org/r/20220804131226.16653-8-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22scsi: mpi3mr: Add helper functions to retrieve device objectsSreekanth Reddy
Add the following helper functions: - Get the device's sas address by reading corresponding device's Device page0 - Get the expander object from expander list based on expander's handle - Get the target device object from target device list based on device's sas address - Get the expander device object from expander list based on expanders's sas address - Get hba port object from hba port table list based on port's port id Link: https://lore.kernel.org/r/20220804131226.16653-7-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22scsi: mpi3mr: Add framework to add phys to STLSreekanth Reddy
Add framework to register and unregister the host and expander phys with SCSI Transport Layer (STL). Link: https://lore.kernel.org/r/20220804131226.16653-6-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22scsi: mpi3mr: Enable Enclosure device add eventSreekanth Reddy
Enable and process the Enclosure device add event. Link: https://lore.kernel.org/r/20220804131226.16653-5-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22scsi: mpi3mr: Add helper functions to retrieve config pagesSreekanth Reddy
Add helper functions to retrieve below controller's config pages: - SAS IOUnit Page0 - SAS IOUnit Page1 - Driver Page1 - Device Page0 - SAS Phy Page0 - SAS Phy Page1 - SAS Expander Page0 - SAS Expander Page1 - Enclosure Page0 Also add the helper function to set SAS IOUnit Page1. Link: https://lore.kernel.org/r/20220804131226.16653-4-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22scsi: mpi3mr: Add framework to issue config requestsSreekanth Reddy
Add framework to issue config requests commands to controller firmware. Link: https://lore.kernel.org/r/20220804131226.16653-3-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22scsi: mpi3mr: Add config and transport related debug flagsSreekanth Reddy
Add config and transport request related error & info debug flags and functions. Link: https://lore.kernel.org/r/20220804131226.16653-2-sreekanth.reddy@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22block: Change the return type of blk_mq_map_queues() into voidBart Van Assche
Since blk_mq_map_queues() and the .map_queues() callbacks always return 0, change their return type into void. Most callers ignore the returned value anyway. Cc: Christoph Hellwig <hch@lst.de> Cc: Jason Wang <jasowang@redhat.com> Cc: Keith Busch <kbusch@kernel.org> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Doug Gilbert <dgilbert@interlog.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: John Garry <john.garry@huawei.com> Acked-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Link: https://lore.kernel.org/r/20220815170043.19489-3-bvanassche@acm.org [axboe: fold in fix from Bart] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-04Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, qla2xx, target, lpfc, smartpqi, mpi3mr). The main driver change that might cause issues on down the road is the conversion of some of our oldest surviving drivers to the DMA API (should only affect m68k). The only major core change is the rework of async resume; the rest are either completely trivial or for updating deprecated APIs" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (195 commits) scsi: target: Remove XDWRITEREAD emulated support scsi: megaraid: Remove the static variable initialisation scsi: ch: Do not initialise statics to 0 scsi: ufs: core: Fix spelling mistake "Cannnot" -> "Cannot" scsi: target: iscsi: Do not require target authentication scsi: target: iscsi: Allow AuthMethod=None scsi: target: iscsi: Support base64 in CHAP scsi: target: iscsi: Add support for extended CDB AHS scsi: ufs: dt-bindings: Add SC8280XP binding scsi: target: iscsi: Fix clang -Wformat warnings scsi: ufs: core: Read device property for ref clock scsi: libsas: Resume SAS host for phy reset or enable via sysfs scsi: hisi_sas: Modify v3 HW SATA completion error processing scsi: hisi_sas: Relocate DMA unmap of SMP task scsi: hisi_sas: Remove unnecessary variable to hold DMA map elements scsi: hisi_sas: Call hisi_sas_slave_configure() from slave_configure_v3_hw() scsi: mpi3mr: Delete a stray tab scsi: mpi3mr: Unlock on error path scsi: mpi3mr: Reduce VD queue depth on detecting throttling scsi: mpi3mr: Resource Based Metering ...
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-23 21:06:41 +0000