summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/stm32-usart.c
AgeCommit message (Collapse)Author
2021-03-10serial: stm32: fix incorrect characters on consoleErwan Le Ray
Incorrect characters are observed on console during boot. This issue occurs when init/main.c is modifying termios settings to open /dev/console on the rootfs. This patch adds a waiting loop in set_termios to wait for TX shift register empty (and TX FIFO if any) before stopping serial port. Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver") Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com> Link: https://lore.kernel.org/r/20210304162308.8984-4-erwan.leray@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10serial: stm32: fix startup by enabling usart for receptionErwan Le Ray
RX is configured, but usart is not enabled in startup function. Kernel documentation specifies that startup should enable the port for reception. Fix the startup by enabling usart for reception. Fixes: 84872dc448fe ("serial: stm32: add RX and TX FIFO flush") Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com> Link: https://lore.kernel.org/r/20210304162308.8984-3-erwan.leray@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10serial: stm32: fix probe and remove order for dmaErwan Le Ray
The probe and remove orders are wrong as the uart_port is registered before saving device data in the probe, and unregistered after DMA resource deallocation in the remove. uart_port registering should be done at the end of probe and unregistering should be done at the begin of remove to avoid resource allocation issues. Fix probe and remove orders. This enforce resource allocation occur at proper time. Terminate both DMA rx and tx transfers before removing device. Move pm_runtime after uart_remove_one_port() call in remove() to keep the probe error path. Fixes: 3489187204eb ("serial: stm32: adding dma support") Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com> Link: https://lore.kernel.org/r/20210304162308.8984-2-erwan.leray@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-22Merge tag 'devicetree-for-5.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: - Sync dtc to upstream version v1.6.0-51-g183df9e9c2b9 and build host fdtoverlay - Add kbuild support to build DT overlays (%.dtbo) - Drop NULLifying match table in of_match_device(). In preparation for this, there are several driver cleanups to use (of_)?device_get_match_data(). - Drop pointless wrappers from DT struct device API - Convert USB binding schemas to use graph schema and remove old plain text graph binding doc - Convert spi-nor and v3d GPU bindings to DT schema - Tree wide schema fixes for if/then schemas, array size constraints, and undocumented compatible strings in examples - Handle 'no-map' correctly for already reserved memblock regions * tag 'devicetree-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits) driver core: platform: Drop of_device_node_put() wrapper of: Remove of_dev_{get,put}() dt-bindings: usb: Change descibe to describe in usbmisc-imx.txt dt-bindings: can: rcar_canfd: Group tuples in pin control properties dt-bindings: power: renesas,apmu: Group tuples in cpus properties dt-bindings: mtd: spi-nor: Convert to DT schema format dt-bindings: Use portable sort for version cmp dt-bindings: ethernet-controller: fix fixed-link specification dt-bindings: irqchip: Add node name to PRUSS INTC dt-bindings: interconnect: Fix the expected number of cells dt-bindings: Fix errors in 'if' schemas dt-bindings: iommu: renesas,ipmmu-vmsa: Make 'power-domains' conditionally required dt-bindings: Fix undocumented compatible strings in examples kbuild: Add support to build overlays (%.dtbo) scripts: dtc: Remove the unused fdtdump.c file scripts: dtc: Build fdtoverlay tool scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9 scripts: dtc: Fetch fdtoverlay.c from external DTC project dt-bindings: thermal: sun8i: Fix misplaced schema keyword in compatible strings dt-bindings: iio: dac: Fix AD5686 references ...
2021-01-26serial: stm32: improve platform_get_irq condition handling in init_portErwan Le Ray
Replace "ret" variable by "irq" variable from platform_get_irq condition handling in stm32_init_port as suggested by Jiri in "STM32 uart cleanup and improvement" series review. This change will prevent port->irq to be unexpectly modified by a potential change of "ret" value introduced by a new patch. Suggested-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com> Link: https://lore.kernel.org/r/20210121142309.6327-1-erwan.leray@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-26serial: stm32: Use of_device_get_match_data()Stephen Boyd
This driver casts away the constness of struct stm32_usart_info that is pointed to by the of match table. Use of_device_get_match_data() instead of of_match_device() here and push the const throughout the code so that we don't cast away const. This nicely avoids referencing the match table when it is undefined with configurations where CONFIG_OF=n and fixes the const issues. Signed-off-by: Stephen Boyd <swboyd@chromium.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: <linux-serial@vger.kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210123034428.2841052-4-swboyd@chromium.org
2021-01-07serial: stm32: update transmission complete error message in shutdownErwan Le Ray
The transmission complete error message provides the status of the ISR_USART_TC bit. This bit, when set, indicates that the transmission has not been completed. The bit status indication is not a very understandable information. The error message sent on console should indicate that the transmission is not complete, instead of providing USART_TC bit status. Update the error message and add a comment for better understanding. Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com> Link: https://lore.kernel.org/r/20210106162203.28854-9-erwan.leray@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07serial: stm32: clean probe and remove port deinitErwan Le Ray
Clean probe and remove port deinit by moving clk_disable_unprepare in a new dedicated deinit_port function. Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com> Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com> Link: https://lore.kernel.org/r/20210106162203.28854-8-erwan.leray@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07serial: stm32: update conflicting RTS/CTS config commentErwan Le Ray
The comment for conflicting RTS/CTS config refers to "st, hw-flow-ctrl", but this property is deprecated since the generic RTS/CTS property has been introduced by the patch 'serial: stm32: Use generic DT binding for announcing RTS/CTS lines'. Update the comment to refer to both generic and deprecated RTS/CTS properties. Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com> Link: https://lore.kernel.org/r/20210106162203.28854-7-erwan.leray@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07serial: stm32: add authorErwan Le Ray
Update email address add new author in authors list. Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com> Link: https://lore.kernel.org/r/20210106162203.28854-5-erwan.leray@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07serial: stm32: add "_usart" prefix in functions nameErwan Le Ray
Adds the prefix "_usart" in the name of stm32 usart functions in order to ease the usage of kernel trace and tools, such as f-trace. Allows to trace "stm32_usart_*" functions with f-trace. Without this patch, all the driver functions needs to be added manually in f-trace filter. Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com> Signed-off-by: Valentin Caron <valentin.caron@foss.st.com> Link: https://lore.kernel.org/r/20210106162203.28854-4-erwan.leray@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07serial: stm32: fix code cleaning warnings and checksErwan Le Ray
Fixes checkpatch --strict warnings and checks: - checkpatch --strict "Unnecessary parentheses" - checkpatch --strict "Blank lines aren't necessary before a close brace - checkpatch --strict "Alignment should match open parenthesis" - checkpatch --strict "Please don't use multiple blank lines" - checkpatch --strict "Comparison to NULL could be written ..." - visual check code ordering warning Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com> Link: https://lore.kernel.org/r/20210106162203.28854-3-erwan.leray@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07serial: stm32: fix DMA initialization error handlingErwan Le Ray
DMA initialization error handling is not properly implemented in the driver. Fix DMA initialization error handling by: - moving TX DMA descriptor request error handling in a new dedicated fallback_err label - adding error handling to TX DMA descriptor submission - adding error handling to RX DMA descriptor submission This patch depends on '24832ca3ee85 ("tty: serial: stm32-usart: Remove set but unused 'cookie' variables")' which unfortunately doesn't include a "Fixes" tag. Fixes: 3489187204eb ("serial: stm32: adding dma support") Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com> Link: https://lore.kernel.org/r/20210106162203.28854-2-erwan.leray@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-06tty: serial: stm32-usart: Remove set but unused 'cookie' variablesLee Jones
Fixes the following W=1 kernel build warning(s): drivers/tty/serial/stm32-usart.c: In function ‘stm32_transmit_chars_dma’: drivers/tty/serial/stm32-usart.c:353:15: warning: variable ‘cookie’ set but not used [-Wunused-but-set-variable] drivers/tty/serial/stm32-usart.c: In function ‘stm32_of_dma_rx_probe’: drivers/tty/serial/stm32-usart.c:1090:15: warning: variable ‘cookie’ set but not used [-Wunused-but-set-variable] Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Gerald Baeza <gerald.baeza@st.com> Cc: linux-serial@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201104193549.4026187-29-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-04serial: stm32: Add RS485 RTS GPIO control againMarek Vasut
While the STM32 does support RS485 drive-enable control within the UART IP itself, some systems have the drive-enable line connected to a pin which cannot be pinmuxed as RTS. Add support for toggling the RTS GPIO line using the modem control GPIOs to provide at least some sort of emulation. Fixes: 7df5081cbf5e ("serial: stm32: Add RS485 RTS GPIO control") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Manivannan Sadhasivam <mani@kernel.org> Cc: Fabrice Gasnier <fabrice.gasnier@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com Link: https://lore.kernel.org/r/20200831171045.205691-1-marex@denx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-18serial: stm32: avoid kernel warning on absence of optional IRQHolger Assmann
stm32_init_port() of the stm32-usart may trigger a warning in platform_get_irq() when the device tree specifies no wakeup interrupt. The wakeup interrupt is usually a board-specific GPIO and the driver functions correctly in its absence. The mainline stm32mp151.dtsi does not specify it, so all mainline device trees trigger an unnecessary kernel warning. Use of platform_get_irq_optional() avoids this. Fixes: 2c58e56096dd ("serial: stm32: fix the get_irq error case") Signed-off-by: Holger Assmann <h.assmann@pengutronix.de> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200813152757.32751-1-h.assmann@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-30serial: stm32: Add RS485 RTS GPIO controlMarek Vasut
While the STM32 does support RS485 drive-enable control within the UART IP itself, some systems have the drive-enable line connected to a pin which cannot be pinmuxed as RTS. Add support for toggling the RTS GPIO line using the modem control GPIOs to provide at least some sort of emulation. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Manivannan Sadhasivam <mani@kernel.org> Cc: Fabrice Gasnier <fabrice.gasnier@st.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-stm32@st-md-mailman.stormreply.com Link: https://lore.kernel.org/r/20200725144947.537007-1-marex@denx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-01serial: stm32: Use generic DT binding for announcing RTS/CTS linesErwan Le Ray
Add support of generic DT binding for annoucing RTS/CTS lines. The initial binding 'st,hw-flow-control' is not needed anymore since generic binding is available, but is kept for backward compatibility. Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Link: https://lore.kernel.org/r/20200520133932.30441-3-erwan.leray@st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-19serial: stm32: add no_console_suspend supportErwan Le Ray
In order to display console messages in low power mode, console pins must be kept active after suspend call. Initial patch "serial: stm32: add support for no_console_suspend" was part of "STM32 usart power improvement" series, but as dependancy to console_suspend pinctl state has been removed to fit with Rob comment [1], this patch has no more dependancy with any other patch of this series. [1] https://lkml.org/lkml/2019/7/9/451 Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Link: https://lore.kernel.org/r/20200519094104.27082-1-erwan.leray@st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-15serial: Allow uart_get_rs485_mode() to return errnoLukas Wunner
We're about to amend uart_get_rs485_mode() to support a GPIO pin for rs485 bus termination. Retrieving the GPIO descriptor may fail, so allow uart_get_rs485_mode() to return an errno and change all callers to check for failure. The GPIO descriptor is going to be stored in struct uart_port. Pass that struct to uart_get_rs485_mode() in lieu of a struct device and struct serial_rs485, both of which are directly accessible from struct uart_port. A few drivers call uart_get_rs485_mode() before setting the struct device pointer in struct uart_port. Shuffle those calls around where necessary. [Heiko Stuebner did the ar933x_uart.c portion, hence his Signed-off-by.] Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/271e814af4b0db3bffbbb74abf2b46b75add4516.1589285873.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-15tty: serial: Add modem control gpio support for STM32 UARTManivannan Sadhasivam
STM32 UART controllers have the built in modem control support using dedicated gpios which can be enabled using 'st,hw-flow-ctrl' flag in DT. But there might be cases where the board design need to use different gpios for modem control. For supporting such cases, this commit adds modem control gpio support to STM32 UART controller using mctrl_gpio driver. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Link: https://lore.kernel.org/r/20200420170204.24541-3-mani@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18tty/serial: Migrate stm32-usart to use has_sysrqDmitry Safonov
The SUPPORT_SYSRQ ifdeffery is not nice as: - May create misunderstanding about sizeof(struct uart_port) between different objects - Prevents moving functions from serial_core.h - Reduces readability (well, it's ifdeffery - it's hard to follow) In order to remove SUPPORT_SYSRQ, has_sysrq variable has been added. Initialise it in driver's probe and remove ifdeffery. Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com Signed-off-by: Dmitry Safonov <dima@arista.com> Link: https://lore.kernel.org/r/20191213000657.931618-45-dima@arista.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-21serial: stm32: fix clearing interrupt error flagsFabrice Gasnier
The interrupt clear flag register is a "write 1 to clear" register. So, only writing ones allows to clear flags: - Replace buggy stm32_clr_bits() by a simple write to clear error flags - Replace useless read/modify/write stm32_set_bits() routine by a simple write to clear TC (transfer complete) flag. Fixes: 4f01d833fdcd ("serial: stm32: fix rx error handling") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1574323849-1909-1-git-send-email-fabrice.gasnier@st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04tty: Remove dev_err() usage after platform_get_irq()Stephen Boyd
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-45-swboyd@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04serial: stm32: Use __maybe_unused instead of #if CONFIG_PM_SLEEPErwan Le Ray
Use __maybe_unused for power management related functionsinstead of fixes: 270e5a74fe4c ("serial: stm32: add wakeup mechanism") Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Link: https://lore.kernel.org/r/1560433800-12255-6-git-send-email-erwan.leray@st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04serial: stm32: add pm_runtime supportErwan Le Ray
Use pm_runtime for clock management. Signed-off-by: Bich Hemon <bich.hemon@st.com> Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Link: https://lore.kernel.org/r/1560433800-12255-5-git-send-email-erwan.leray@st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04serial: stm32: select pinctrl state in each suspend/resume functionErwan Le Ray
Select either pinctrl sleep state in suspend function or default state in resume function. Signed-off-by: Bich Hemon <bich.hemon@st.com> Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Link: https://lore.kernel.org/r/1560433800-12255-4-git-send-email-erwan.leray@st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-21serial: stm32: add RX and TX FIFO flushErwan Le Ray
Adds a flush of RX and TX FIFOs, and fixes some errors: - adds RX FIFO flush in startup fonction - removes the useless transmitter enabling in startup fonction (e.g. receiver only, see Documentation/serial/driver) - configures FIFO threshold before enabling it, rather than after - flushes both TX and RX in set_termios function Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-21serial: stm32: add support of RX FIFO thresholdErwan Le Ray
Adds the support of RX FIFO threshold in order to improve the RX FIFO management. This is done by enabling fifo threshold interrupt, instead of relying on rx empty/fifo not full irq. That basically generates one irq/char currently. With this patch: - RXCFG is set to half fifo size (e.g. 16/2 = 8 data for a 16 data depth FIFO) - irq rate may be reduced by up to 1/RXCFG, e.g. 1 over 8 with current RXCFG setting. - Receiver timeout is used to gather chars when FIFO threshold isn't reached. Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-21serial: stm32: add support of TX FIFO thresholdErwan Le Ray
Adds the support of TX FIFO threshold in order to improve the TX FIFO management: - TX FIFO threshold irq enabling (instead of relying on tx empty / fifo not full irq that generates one irq/char) - TXCFG is set to half fifo size (e.g. 16/2 = 8 data for a 16 data depth FIFO) - irq rate may be reduced by up to 1/TXCFG, e.g. 1 over 8 with current TXCFG setting. Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-21serial: stm32: update PIO transmissionErwan Le Ray
Improves PIO transmission: - Replaces the FIFO filling per character by a filling per blocks of characters, which provides better performances - Replaces the active waiting loop by TX empty interrupt dynamic handling. TXE interrupt is now enabled when data has to be sent (ie when uart_circ is not empty), and inhibited when there is no more data to send (ie when uart_circ is empty). Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-21serial: stm32: add support of timeout interrupt for RXErwan Le Ray
Add support of RX timeout interrupts to limit the number of interrupts. RX timeout is a number of bits (baud clock cycles) without transmission seen in the receiver. One character is used as an arbitrary RX timeout value. If parity is enabled, the number of bits has to include parity bit. Signed-off-by: Gerald Baeza <gerald.baeza@st.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-13Revert "serial: stm32: select pinctrl state in each suspend/resume function"Greg Kroah-Hartman
This reverts commit c70669ecef4e34af8913108fae4b8a9b1dc63fa1 as it breaks the build. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: kbuild test robot <lkp@intel.com> Cc: Bich Hemon <bich.hemon@st.com> Cc: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-10serial: stm32: fix a recursive locking in stm32_config_rs485Borut Seljak
Remove spin_lock_irqsave in stm32_config_rs485, it cause recursive locking. Already locked in uart_set_rs485_config. Fixes: 1bcda09d291081 ("serial: stm32: add support for RS485 hardware control mode") Signed-off-by: Borut Seljak <borut.seljak@t-2.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-10serial: stm32: Make stm32_get_databits staticYueHaibing
Fix sparse warning: drivers/tty/serial/stm32-usart.c:603:14: warning: symbol 'stm32_get_databits' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-10serial: stm32: select pinctrl state in each suspend/resume functionBich Hemon
Select either pinctrl sleep state in suspend function or default state in resume function. Signed-off-by: Bich Hemon <bich.hemon@st.com> Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24serial: stm32: fix the get_irq error caseErwan Le Ray
Checks the returned values of platform_get_irq() for both required "event" and optional "wakeup" IRQs during probe. This allows the driver probe to be deferred if needed. Removes redundant checks for 'cfg.has_wakeup'. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24serial: stm32: fix wakeup source initializationErwan Le Ray
Fixes dedicated_irq_wakeup issue and deactivated uart as wakeup source by default. Fixes: 270e5a74fe4c ("serial: stm32: add wakeup mechanism") Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24serial: stm32: Add support of TC bit status checkErwan Le Ray
Adds a check on the Transmission Complete bit status before closing the com port. Prevents the port closure before the end of the transmission. TC poll loop is moved from stm32_tx_dma_complete to stm32_shutdown routine, in order to check TC before shutdown in both dma and PIO tx modes. TC clear is added in stm32_transmit_char routine, in order to be cleared before transmitting in both dma and PIO tx modes. Fixes: 3489187204eb ("serial: stm32: adding dma support") Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24serial: stm32: fix transmit_chars when tx is stoppedErwan Le Ray
Disables the tx irq when the transmission is ended and updates stop_tx conditions for code cleanup. Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver") Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24serial: stm32: fix rx data length when parity enabledErwan Le Ray
- Fixes a rx data error when data length < 8 bits and parity is enabled. RDR register MSB is used for parity bit reception. - Adds a mask to ignore MSB when data is get from RDR. Fixes: 3489187204eb ("serial: stm32: adding dma support") Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24serial: stm32: fix rx error handlingErwan Le Ray
- Fixes parity and framing error bit by clearing parity and framing error flag. The current implementation doesn't clear the error bits when an error is detected. - Fixes the incorrect name of framing error clearing flag in header file. - Fixes misalignement between data frame and errors status. The status read for "n" frame was the status of "n+1" frame". - Fixes break detection was not triggered by the expected register. Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver") Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24serial: stm32: fix word length configurationErwan Le Ray
STM32 supports either: - 8 and 9 bits word length (including parity bit) for stm32f4 compatible devices - 7, 8 and 9 bits word length (including parity bit) for stm32f7 and stm32h7 compatible devices. As a consequence STM32 supports the following termios configurations: - CS7 with parity bit, and CS8 (with or without parity bit) for stm32f4 compatible devices. - CS6 with parity bit, CS7 and CS8 (with or without parity bit) for stm32f7 and stm32h7 compatible devices. This patch is fixing word length by configuring correctly the SoC with supported configurations. Fixes: ada8618ff3bf ("serial: stm32: adding support for stm32f7") Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-15serial: stm32: fix initialization of RS485 modeBich HEMON
Configure RS485 mode during port initialization. Fixes: 1bcda09d2910 ("serial: stm32: add support for RS485 hardware control mode") Signed-off-by: Bich Hemon <bich.hemon@st.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14serial: stm32: add support for RS485 hardware control modeBich HEMON
Implement Driver Enable signal (DE) to activate the transmission mode of the external transceiver. Signed-off-by: Yves Coppeaux <yves.coppeaux@st.com> Signed-off-by: Bich Hemon <bich.hemon@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08tty: serial: Remove redundant license textGreg Kroah-Hartman
Now that the SPDX tag is in all tty files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Jiri Slaby <jslaby@suse.com> Cc: Eric Anholt <eric@anholt.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Joachim Eastwood <manabian@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Russell King <linux@armlinux.org.uk> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Richard Genoud <richard.genoud@gmail.com> Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Pat Gefre <pfg@sgi.com> Cc: "Guilherme G. Piccoli" <gpiccoli@linux.vnet.ibm.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Sylvain Lemieux <slemieux.tyco@gmail.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Andy Gross <andy.gross@linaro.org> Cc: David Brown <david.brown@linaro.org> Cc: "Andreas Färber" <afaerber@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Barry Song <baohua@kernel.org> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Timur Tabi <timur@tabi.org> Cc: Tony Prisk <linux@prisktech.co.nz> Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08tty: add SPDX identifiers to all remaining files in drivers/tty/Greg Kroah-Hartman
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/tty files files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Jiri Slaby <jslaby@suse.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: David Sterba <dsterba@suse.com> Cc: James Hogan <jhogan@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Eric Anholt <eric@anholt.net> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Joachim Eastwood <manabian@gmail.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Russell King <linux@armlinux.org.uk> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Richard Genoud <richard.genoud@gmail.com> Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Baruch Siach <baruch@tkos.co.il> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Cc: "Uwe Kleine-König" <kernel@pengutronix.de> Cc: Pat Gefre <pfg@sgi.com> Cc: "Guilherme G. Piccoli" <gpiccoli@linux.vnet.ibm.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Sylvain Lemieux <slemieux.tyco@gmail.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Andy Gross <andy.gross@linaro.org> Cc: David Brown <david.brown@linaro.org> Cc: "Andreas Färber" <afaerber@suse.de> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Barry Song <baohua@kernel.org> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Timur Tabi <timur@tabi.org> Cc: Tony Prisk <linux@prisktech.co.nz> Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Jiri Slaby <jslaby@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-04Arm: dts: stm32: remove extra compatible string from DT & driverVikas Manocha
This patch remove the extra compatibility string "st,stm32-usart" from driver & device tree. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28serial: stm32-usart: Avoid using irq_wake flagAndy Shevchenko
There is no need to duplicate a flag which IRQ core takes care of. Replace custom flag by IRQ core API that retrieves its state. Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28serial: stm32: fix pio transmit timeoutGerald Baeza
100µs was too short for low speed transmission (9600bps) Signed-off-by: Gerald Baeza <gerald.baeza@st.com> Signed-off-by: Bich Hemon <bich.hemon@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-22 19:37:17 +0000