| Age | Commit message (Collapse) | Author |
|---|
|
This improves flush_buf() so that it always returns nonzero when we're
done reading and ready to return to userspace, and so that it returns
the value we want to return to userspace (number of bytes read, if there
wasn't an error).
In the future we'll be better abstracting this mechanism and pulling it
out of bcachefs, and using it to replace seq_file.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
We need to turn the flush_buf() thing into a proper API, to replace
seq_file.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
We need a way to check if the machinery for handling btree_paths with in
a transaction is behaving reasonably, as it often has not been - we've
had bugs with transaction path overflows caused by duplicate paths and
plenty of other things.
This patch tracks, per transaction fn, the most btree paths ever
allocated by that transaction and makes it available in debugfs.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Going to be adding more things to this in the next patch.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes a bug where we were leaking a transaction restart error to
userspace.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
We now record the length of time btree locks are held and expose this in debugfs.
Enabled via CONFIG_BCACHEFS_LOCK_TIME_STATS.
Signed-off-by: Daniel Hill <daniel@gluo.nz>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When inserting a key type that's not valid for a given btree, we should
print out which btree we were inserting into.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This converts bcachefs to the modern printbuf interface/implementation,
synced with the version to be submitted upstream.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Six locks have a percpu mode, which we use for interior btree nodes, as
well as btree key cache keys for the subvolumes btree. We've been
switching locks back and forth between percpu and non percpu mode as
needed, but it turns out this is racy - when we're reusing an existing
node, other threads could be attempting to lock it while we're switching
it between modes.
This patch fixes this by never switching 'struct btree' between the two
modes, and instead segragating them between two different freed lists.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
In sysfs, files can only output at most PAGE_SIZE. This is a problem for
debug info that needs to list an arbitrary number of times, and because
of this limit some of our debug info has been terser and harder to read
than we'd like.
This patch moves info about journal pins and cached btree nodes to
debugfs, and greatly expands and improves the output we return.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This patch changes printbufs dynamically allocate and reallocate a
buffer as needed. Stack usage has become a bit of a problem, and a major
cause of that has been static size string buffers on the stack.
The most involved part of this refactoring is that printbufs must now be
exited with printbuf_exit().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
It wasn't updated for snapshots - it's iterating across keys in all
snapshots, so needs to be specifying BTREE_ITER_ALL_SNAPSHOTS.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This fixes a bug where the filesystem goes read only when reading from
debugfs.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This changes for_each_btree_node() to work like for_each_btree_key(),
and to that end bch2_btree_iter_peek_node() and next_node() also return
error ptrs.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This splits btree_iter into two components: btree_iter is now the
externally visible componont, and it points to a btree_path which is now
reference counted.
This means we no longer have to clone iterators up front if they might
be mutated - btree_path can be shared by multiple iterators, and cloned
if an iterator would mutate a shared btree_path. This will help us use
iterators more efficiently, as well as slimming down the main long lived
state in btree_trans, and significantly cleans up the logic for iterator
lifetimes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This is something we've attempted to stick to for quite some time, as it
helps guarantee filesystem latency - but there's a few remaining paths
that this patch fixes.
This is also necessary for an upcoming patch to update btree pointers
after every btree write - since the btree write completion path will now
be doing btree operations.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Internal btree code really wants a POS_MAX with all fields ~0; external
code more likely wants the snapshot field to be 0, because when we're
passing it to bch2_trans_get_iter() it's used for the snapshot we're
operating in, which should be 0 for most btrees that don't use
snapshots.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
bch2_btree_verify() verifies that the btree node on disk matches what we
have in memory. This patch changes it to verify every replica, and also
fixes it for interior btree nodes - there's a mem_ptr field which is
used as a scratch space and needs to be zeroed out for comparing with
what's on disk.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
In userspace, we don't really have a well defined PAGE_SIZE and shouln't
be relying on it. This is some more incremental work to remove
references to it.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This patch starts treating the bpos.snapshot field like part of the key
in the btree code:
* bpos_successor() and bpos_predecessor() now include the snapshot field
* Keys in btrees that will be using snapshots (extents, inodes, dirents
and xattrs) now always have their snapshot field set to U32_MAX
The btree iterator code gets a new flag, BTREE_ITER_ALL_SNAPSHOTS, that
determines whether we're iterating over keys in all snapshots or not -
internally, this controlls whether bkey_(successor|predecessor)
increment/decrement the snapshot field, or only the higher bits of the
key.
We add a new member to struct btree_iter, iter->snapshot: when
BTREE_ITER_ALL_SNAPSHOTS is not set, iter->pos.snapshot should always
equal iter->snapshot, which will be 0 for btrees that don't use
snapshots, and alsways U32_MAX for btrees that will use snapshots
(until we enable snapshot creation).
This patch also introduces a new metadata version number, and compat
code for reading from/writing to older versions - this isn't a forced
upgrade (yet).
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
With snapshots, we're going to need to differentiate between comparisons
that should and shouldn't include the snapshot field. bpos_cmp is now
the comparison function that does include the snapshot field, used by
core btree code.
Upper level filesystem code generally does _not_ want to compare against
the snapshot field - that code wants keys to compare as equal even when
one of them is in an ancestor snapshot.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The way btree iterators work internally has been changing, particularly
with the iter->real_pos changes, and bch2_btree_iter_next() is no longer
hyper optimized - it's just advance followed by peek, so it's more
efficient to just call advance where we're not using the return value of
bch2_btree_iter_next().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We keep running into occasional bugs with btree transaction iterators
overflowing - this will make those bugs more visible.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
It's not used much anymore, the module paramter interface is better.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Switch to always using bio_add_page(), which merges contiguous pages now
that we have multipage bvecs.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This is prep work for the btree key cache: btree iterators will point to
either struct btree, or a new struct bkey_cached.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
this lets us get rid of a lot of extra switch statements - in a lot of
places we dispatch on the btree node type, and then the key type, so
this is a nice cleanup across a lot of code.
Also improve the on disk format versioning stuff.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Initially forked from drivers/md/bcache, bcachefs is a new copy-on-write
filesystem with every feature you could possibly want.
Website: https://bcachefs.org
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
