| Age | Commit message (Collapse) | Author |
|---|
|
When new device is being added to seed FS, seed FS is marked writable,
but when we fail to bring in the new device, we missed to undo the
writable part. This patch fixes it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
EXTENT_CSUM checker is a relatively easy one, only needs to check:
1) Objectid
Fixed to BTRFS_EXTENT_CSUM_OBJECTID
2) Key offset alignment
Must be aligned to sectorsize
3) Item size alignedment
Must be aligned to csum size
Signed-off-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add extra checks for item with EXTENT_DATA type. This checks the
following thing:
0) Key offset
All key offsets must be aligned to sectorsize.
Inline extent must have 0 for key offset.
1) Item size
Uncompressed inline file extent size must match item size.
(Compressed inline file extent has no information about its on-disk size.)
Regular/preallocated file extent size must be a fixed value.
2) Every member of regular file extent item
Including alignment for bytenr and offset, possible value for
compression/encryption/type.
3) Type/compression/encode must be one of the valid values.
This should be the most comprehensive and strict check in the context
of btrfs_item for EXTENT_DATA.
Signed-off-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ switch to BTRFS_FILE_EXTENT_TYPES, similar to what
BTRFS_COMPRESS_TYPES does ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Function check_leaf() checks if any item pointer points outside of the
leaf, but it doesn't check if the pointer overlaps with the item itself.
Normally only the last item may be the victim, but adding such check is
never a bad idea anyway.
Signed-off-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Current check_leaf() function does a good job checking key order and
item offset/size.
However it only checks from slot 0 to the last but one slot, this is
good but makes later expansion hard.
So this refactoring iterates from slot 0 to the last slot.
For key comparison, it uses a key with all 0 as initial key, so all
valid keys should be larger than that.
And for item size/offset checks, it compares current item end with
previous item offset.
For slot 0, use leaf end as a special case.
This makes later item/key offset checks and item size checks easier to
be implemented.
Also, makes check_leaf() to return -EUCLEAN other than -EIO to indicate
error.
Signed-off-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Was added in:
c8b978188c9a0fd3d535c13debd19d522b726f1f
"Btrfs: Add zlib compression support"
Survive to near time (from 08.10.2008).
Because 'start' checked for zero before branch, so it's safe to remove
that subtraction.
Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Nikolay reported that generic/273 was failing currently with ENOSPC.
Turns out this is because we get to the point where the outstanding
reservations are greater than the pinned space on the fs. This is a
mistake, previously we used the current reservation amount in
may_commit_transaction, not the entire outstanding reservation amount.
Fix this to find the minimum byte size needed to make progress in
flushing, and pass that into may_commit_transaction. From there we can
make a smarter decision on whether to commit the transaction or not.
This fixes the failure in generic/273.
From Nikolai, IOW: when we go to the final stage of deciding whether to
do trans commit, instead of passing all the reservations from all
tickets we just pass the reservation for the current ticket. Otherwise,
in case all reservations exceed pinned space, then we don't commit
transaction and fail prematurely. Before we passed num_bytes from
flush_space, where num_bytes was the sum of all pending reserverations,
but now all we do is take the first ticket and commit the trans if we
can satisfy that.
Fixes: 957780eb2788 ("Btrfs: introduce ticketed enospc infrastructure")
Cc: stable@vger.kernel.org # 4.8
Reported-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
[ added Nikolai's comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
By analyzing the perf on btrfs send, we found it take large amount of
cpu time on page_cache_sync_readahead. This effort can be reduced after
switching to asynchronous one. Overall performance gain on HDD and SSD
were 9 and 15 percent if simply send a large file.
Signed-off-by: Kuanling Huang <peterh@synology.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The local bio_list may have pending bios when doing cleanup, it can
end up with memory leak if they don't get freed.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Don't populate the read-only array types on the stack, instead make
it static const. Makes the object code smaller by nearly 60 bytes:
Before:
text data bss dec hex filename
90536 6552 64 97152 17b80 fs/btrfs/ioctl.o
After:
text data bss dec hex filename
90414 6616 64 97094 17b46 fs/btrfs/ioctl.o
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Forward the correct return value -ENOMEM from btrfsic_dev_state_alloc()
too.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ adjust changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We've seen the following backtrace stack in ftrace or dmesg log,
kworker/u16:10-4244 [000] 241942.480955: function: btrfs_put_ordered_extent
kworker/u16:10-4244 [000] 241942.480956: kernel_stack: <stack trace>
=> finish_ordered_fn (ffffffffa0384475)
=> btrfs_scrubparity_helper (ffffffffa03ca577) <-----"incorrect"
=> btrfs_freespace_write_helper (ffffffffa03ca98e) <-----"correct"
=> process_one_work (ffffffff81117b2f)
=> worker_thread (ffffffff81118c2a)
=> kthread (ffffffff81121de0)
=> ret_from_fork (ffffffff81d7087a)
btrfs_freespace_write_helper is actually calling normal_worker_helper
instead of btrfs_scrubparity_helper, so somehow kernel has parsed the
incorrect function address while unwinding the stack,
btrfs_scrubparity_helper really shouldn't be shown up.
It's caused by compiler doing inline for our helper function, adding a
noinline tag can fix that.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ use noinline_for_stack ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since both committing transaction and writing log-tree are doing
plugging on metadata IO, we can unify to use %sync_writers to benefit
both cases, instead of checking bio_flags while writing meta blocks of
log-tree.
We can remove this bio_flags because in order to write dirty blocks,
log tree also uses btrfs_write_marked_extents(), inside which we
have enabled %sync_writers, therefore, every write goes in a
synchronous way, so does checksuming.
Please also note that, bio_flags is applied per-context while
%sync_writers is applied per-inode, so this might incur some overhead, ie.
1) while log tree is flushing its dirty blocks via
btrfs_write_marked_extents(), in which %sync_writers is increased
by one.
2) in the meantime, some writeback operations may happen upon btrfs's
metadata inode, so these writes go synchronously, too.
However, AFAICS, the overhead is not a big one while the win is that
we unify the two places that needs synchronous way and remove a
special hack/flag.
This removes the bio_flags related stuff for writing log-tree.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have started plug in btrfs_write_and_wait_marked_extents() but the
generated IOs actually go to device's schedule IO list where the work
is doing in another task, thus the started plug doesn't make any
sense.
And since we wait for IOs immediately after writing meta blocks, it's
the same case as writing log tree, doing sync submit can merge more
IOs.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There are checks on fs_info in __btrfs_panic to avoid dereferencing a
null fs_info, however, there is a call to btrfs_crit that may also
dereference a null fs_info. Fix this by adding a check to see if fs_info
is null and only print the s_id if fs_info is non-null.
Detected by CoverityScan CID#401973 ("Dereference after null check")
Fixes: efe120a067c8 ("Btrfs: convert printk to btrfs_ and fix BTRFS prefix")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The value of variable 'can_recover' is never used after being set, thus
it should be removed, as it was never used since the first commit
68a7342c51c95042 ("Btrfs: cleanup orphaned root orphan item").
Signed-off-by: Christos Gkekas <chris.gekas@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If 'btrfs_alloc_path()' fails, we must free the resources already
allocated, as done in the other error handling paths in this function.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
__link_block_group is called from only 2 places and at each call site the
space_info being passed is the same as the space info assigned to the passed
cache struct. Let's remove the redundant argument and make the function
reference the space_info from the passed block_group_cache. No functional
changes
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ renamed to link_block_group ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently the code executes add_extent_mapping and if it is successful
it links the new mapping, it then proceeds to unlock the extent mapping
tree and check for failure and handle them. Instead, rework the code to
only perform a single check if add_extent_mapping has failed and handle
it, otherwise the code continues in a linear fashion. No functional
changes
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Introduced by 5a5f79b57069 ("Btrfs: allow unaligned DIO") and never
used. The buffered fallback from unaligned DIO works as expected.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Timofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_changed_cb_t represents the signature of the callback being passed
to btrfs_compare_trees. Currently there is only one such callback,
namely changed_cb in send.c. This function doesn't really uses the first
2 parameters, i.e. the roots. Since there are not other functions
implementing the btrfs_changed_cb_t let's remove the unused parameters
from the prototype and implementation.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
iterate_dir_item:found_key - introduced in 31db9f7c23fb ("Btrfs:
introduce BTRFS_IOC_SEND for btrfs send/receive"), yet never used.
record_ref:num - ditto
This is a first pass with the low-hanging fruit. There are still quite a
few unsued parameters in some function which have to abide by a callback
interface.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Src was initially part of 31ff1cd25d37 ("Btrfs: Copy into the log tree in
big batches"), however 16e7549f045d ("Btrfs: incompatible format change
to remove hole extents") changed parameters passed to copy_items which
made the src variable redundant.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Timofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
While we submit direct writes, if the inode is flagged with nodatasum,
there's no benefit to submit asynchronously, because
a) we don't have to calculate checksum across processors,
b) and direct IO has started a plug, but async submit makes us queue
IO on each device's scheduled IO list instead of DIO's plug list, so
that IOs get much less merges in general.
Lets use sync submit for nodatasum inodes.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
After mapping block with BTRFS_MAP_WRITE, parities have been sorted to
the end position, so this search can start from the first parity
stripe.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ copied changelog as a comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We didn't copy fsid to struct super_block.s_uuid so Overlay disables
index feature with btrfs as the lower FS.
kernel: overlayfs: fs on '/lower' does not support file handles, falling back to index=off.
Fix this by publishing the fsid through struct super_block.s_uuid.
[ dsterba: I think that setting s_uuid is the last missing bit. Overlay
needs the file handle encoding support from the lower filesystem, which
is supported. Filling the whole filesystem id is correct, the subvolume
id is encoded in the file handle buffer from inside btrfs_encode_fh. ]
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
These aren't used outside of volumes.c.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Some static functions are needlessly forward declared. Let's remove those
declarations since they add no value.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Both wait_for_commit() and wait_for_writer() are checking the
condition out of the mutex lock.
This refactors code a bit to be lock safe.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since TASK_UNINTERRUPTIBLE has been used here, wait_event() can do the
same job.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If we're still going to wait after schedule(), we don't have to do
finish_wait() to remove our %wait_queue_entry since prepare_to_wait()
won't add the same %wait_queue_entry twice.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Block layer has a limit on plug, ie. BLK_MAX_REQUEST_COUNT == 16, so
we don't gain benefits by batching 64 bios here.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[AV: in addition to the fix in previous commit]
Signed-off-by: Matthew Garrett <mjg59@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Two more fixes for bugs introduced in 4.13.
The sector_t problem with 32bit architecture and !LBDAF config seems
serious but the number of affected deployments is hopefully low.
The clashing status bits could lead to a confusing in-memory state of
the whole-filesystem operations if used with the quota override sysfs
knob"
* 'for-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix overlap of fs_info::flags values
btrfs: avoid overflow when sector_t is 32 bit
|
|
Because the values of BTRFS_FS_EXCL_OP and BTRFS_FS_QUOTA_OVERRIDE overlap,
we should change the value.
First, BTRFS_FS_EXCL_OP was set to 14.
commit 171938e52807 ("btrfs: track exclusive filesystem operation in flags")
Next, the value of BTRFS_FS_QUOTA_OVERRIDE was set to 14.
commit f29efe292198 ("btrfs: add quota override flag to enable quota override for CAP_SYS_RESOURCE")
As a result, the value 14 overlapped, by accident.
This problem is solved by defining the value of BTRFS_FS_EXCL_OP as 16,
the flags are internal.
Fixes: f29efe292198 ("btrfs: add quota override flag to enable quota override for CAP_SYS_RESOURCE")
CC: stable@vger.kernel.org # 4.13+
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minimize the change, update only BTRFS_FS_EXCL_OP ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Jean-Denis Girard noticed commit c821e7f3 "pass bytes to
btrfs_bio_alloc" (https://patchwork.kernel.org/patch/9763081/)
introduces a regression on 32 bit machines.
When CONFIG_LBDAF is _not_ defined (CONFIG_LBDAF == Support for large
(2TB+) block devices and files) sector_t is 32 bit on 32bit machines.
In the function submit_extent_page, 'sector' (which is sector_t type) is
multiplied by 512 to convert it from sectors to bytes, leading to an
overflow when the disk is bigger than 4GB (!).
I added a cast to u64 to avoid overflow.
Fixes: c821e7f3 ("btrfs: pass bytes to btrfs_bio_alloc")
CC: stable@vger.kernel.org # 4.13+
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"We've collected a bunch of isolated fixes, for crashes, user-visible
behaviour or missing bits from other subsystem cleanups from the past.
The overall number is not small but I was not able to make it
significantly smaller. Most of the patches are supposed to go to
stable"
* 'for-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: log csums for all modified extents
Btrfs: fix unexpected result when dio reading corrupted blocks
btrfs: Report error on removing qgroup if del_qgroup_item fails
Btrfs: skip checksum when reading compressed data if some IO have failed
Btrfs: fix kernel oops while reading compressed data
Btrfs: use btrfs_op instead of bio_op in __btrfs_map_block
Btrfs: do not backup tree roots when fsync
btrfs: remove BTRFS_FS_QUOTA_DISABLING flag
btrfs: propagate error to btrfs_cmp_data_prepare caller
btrfs: prevent to set invalid default subvolid
Btrfs: send: fix error number for unknown inode types
btrfs: fix NULL pointer dereference from free_reloc_roots()
btrfs: finish ordered extent cleaning if no progress is found
btrfs: clear ordered flag on cleaning up ordered extents
Btrfs: fix incorrect {node,sector}size endianness from BTRFS_IOC_FS_INFO
Btrfs: do not reset bio->bi_ops while writing bio
Btrfs: use the new helper wbc_to_write_flags
|
|
Amir reported a bug discovered by his cleaned up version of my
dm-log-writes xfstests where we were missing csums at certain replay
points. This is because fsx was doing an msync(), which essentially
fsync()'s a specific range of a file. We will log all modified extents,
but only search for the checksums in the range we are being asked to
sync. We cannot simply log the extents in the range we're being asked
because we are logging the inode item as it is currently, which if it
has had a i_size update before the msync means we will miss extents when
replaying. We could possibly get around this by marking the inode with
the transaction that extended the i_size to see if we have this case,
but this would be racy and we'd have to lock the whole range of the
inode to make sure we didn't have an ordered extent outside of our range
that was in the middle of completing.
Fix this simply by keeping track of the modified extents range and
logging the csums for the entire range of extents that we are logging.
This makes the xfstest pass.
Reported-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
commit 4246a0b63bd8 ("block: add a bi_error field to struct bio")
changed the logic of how dio read endio reports errors.
For single stripe dio read, %bio->bi_status reflects the error before
verifying checksum, and now we're updating it when data block matches
with its checksum, while in the mismatching case, %bio->bi_status is
not updated to relfect that.
When some blocks in a file have been corrupted on disk, reading such a
file ends up with
1) checksum errors are reported in kernel log
2) read(2) returns successfully with some content being 0x01.
In order to fix it, we need to report its checksum mismatch error to
the upper layer (dio layer in this case) as well.
Fixes: 4246a0b63bd8 ("block: add a bi_error field to struct bio")
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reported-by: Goffredo Baroncelli <kreijack@inwind.it>
Tested-by: Goffredo Baroncelli <kreijack@inwind.it>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Previously, we were calling del_qgroup_item, and ignoring the return code
resulting in a potential to have divergent in-memory state without an
error. Perhaps, it makes sense to handle this error code, and put the
filesystem into a read only, or similar state.
This patch only adds reporting of the error if the error is fatal,
(any error other than qgroup not found).
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Reviewed-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently even if the underlying disk reports failure on IO,
compressed read endio still gets to verify checksum and reports it as
a checksum error.
In fact, if some IO have failed during reading a compressed data
extent , there's no way the checksum could match, therefore, we can
skip that in order to return error quickly to the upper layer.
Please note that we need to do this after recording the failed mirror
index so that read-repair in the upper layer's endio can work
properly.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Tested-by: Paul Jones <paul@pauljones.id.au>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The kernel oops happens at
kernel BUG at fs/btrfs/extent_io.c:2104!
...
RIP: clean_io_failure+0x263/0x2a0 [btrfs]
It's showing that read-repair code is using an improper mirror index.
This is due to the fact that compression read's endio hasn't recorded
the failed mirror index in %cb->orig_bio.
With this, btrfs's read-repair can work properly on reading compressed
data.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reported-by: Paul Jones <paul@pauljones.id.au>
Tested-by: Paul Jones <paul@pauljones.id.au>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This seems to be a leftover of commit cf8cddd38bab ("btrfs: don't
abuse REQ_OP_* flags for btrfs_map_block").
It should use btrfs_op() helper to provide one of 'enum btrfs_map_op'
types.
Fixes: cf8cddd38bab ("btrfs: don't abuse REQ_OP_* flags for btrfs_map_block")
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
It doesn't make sense to backup tree roots when doing fsync, since
during fsync those tree roots have not been consistent on disk.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently, "btrfs quota enable" would fail after "btrfs quota disable" on
the first time with syslog output "qgroup_rescan_init failed with -22", but
it would succeed on the second time.
When "quota disable" is called, BTRFS_FS_QUOTA_DISABLING flag bit will be
set in fs_info->flags in btrfs_quota_disable(), but it will not be droppd
in btrfs_run_qgroups() (which is called in btrfs_commit_transaction())
because quota_root has already been freed. If "quota enable" is called
after that, both BTRFS_FS_QUOTA_DISABLING and BTRFS_FS_QUOTA_ENABLED flag
would be dropped in the btrfs_run_qgroups() since quota_root is not NULL.
This leads to the failure of "quota enable" on the first time.
BTRFS_FS_QUOTA_DISABLING flag is not used outside of "quota disable"
context and is equivalent to whether quota_root is NULL or not.
btrfs_run_qgroups() checks whether quota_root is NULL or not in the first
place.
So, let's remove BTRFS_FS_QUOTA_DISABLING flag.
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_cmp_data_prepare() (almost) always returns 0 i.e. ignoring errors
from gather_extent_pages(). While the pages are freed by
btrfs_cmp_data_free(), cmp->num_pages still has > 0. Then,
btrfs_extent_same() try to access the already freed pages causing faults
(or violates PageLocked assertion).
This patch just return the error as is so that the caller stop the process.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Fixes: f441460202cb ("btrfs: fix deadlock with extent-same and readpage")
Cc: <stable@vger.kernel.org> # 4.2
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
`btrfs sub set-default` succeeds to set an ID which isn't corresponding to any
fs/file tree. If such the bad ID is set to a filesystem, we can't mount this
filesystem without specifying `subvol` or `subvolid` mount options.
Fixes: 6ef5ed0d386b ("Btrfs: add ioctl and incompat flag to set the default mount subvol")
Cc: <stable@vger.kernel.org>
Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Reviewed-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
ENOTSUPP should not be returned to the user program.
(cf. include/linux/errno.h)
Therefore, EOPNOTSUPP is used instead of ENOTSUPP.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
