summaryrefslogtreecommitdiff
path: root/fs/btrfs
AgeCommit message (Collapse)Author
2018-01-22btrfs: sink get_extent parameter to extent_fiemapDavid Sterba
All callers pass btrfs_get_extent_fiemap and we don't expect anything else in the context of extent_fiemap. Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22btrfs: drop get_extent from extent_page_dataDavid Sterba
Previous patches cleaned up all places where extent_page_data::get_extent was set and it was btrfs_get_extent all the time, so we can simply call that instead. This also reduces size of extent_page_data by 8 bytes which has positive effect on stack consumption on various functions on the write out path. Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22btrfs: sink get_extent parameter to extent_write_full_pageDavid Sterba
There's only one caller. Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22btrfs: sink get_extent parameter to extent_write_locked_rangeDavid Sterba
There's only one caller. Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22btrfs: sink get_extent parameter to extent_writepagesDavid Sterba
There's only one caller. Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22btrfs: Cleanup existing name_len checksQu Wenruo
Since tree-checker has verified leaf when reading from disk, we don't need the existing verify_dir_item() or btrfs_is_name_len_valid() checks. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22btrfs: tree-checker: Add checker for dir itemQu Wenruo
Add checker for dir item, for key types DIR_ITEM, DIR_INDEX and XATTR_ITEM. This checker does comprehensive checks for: 1) dir_item header and its data size Against item boundary and maximum name/xattr length. This part is mostly the same as old verify_dir_item(). 2) dir_type Against maximum file types, and against key type. Since XATTR key should only have FT_XATTR dir item, and normal dir item type should not have XATTR key. The check between key->type and dir_type is newly introduced by this patch. 3) name hash For XATTR and DIR_ITEM key, key->offset is name hash (crc32c). Check the hash of the name against the key to ensure it's correct. The name hash check is only found in btrfs-progs before this patch. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Su Yue <suy.fnst@cn.fujitsu.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22btrfs: use GFP_KERNEL in btrfs_alloc_inodeDavid Sterba
This callback is called directly from VFS, no locks are held at the allocation time. Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22btrfs: sink gfp parameter to clear_extent_uptodateDavid Sterba
There's only one callsite with GFP_NOFS. Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22btrfs: sink gfp parameter to clear_extent_bitDavid Sterba
All callers use GFP_NOFS, we don't have to pass it as an argument. The built-in tests pass GFP_KERNEL, but they run only at module load time and NOFS works there as well. Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22btrfs: prepare to drop gfp mask parameter from clear_extent_bitDavid Sterba
Use __clear_extent_bit directly in case we want to pass unknown gfp flags. Otherwise all clear_extent_bit callers use GFP_NOFS, so we can sink them to the function and reduce argument count, at the cost that __clear_extent_bit has to be exported. Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22btrfs: use non-RCU list traversal in write_all_supers calleesDavid Sterba
We take the fs_devices::device_list_mutex mutex in write_all_supers which will prevent any add/del changes to the device list. Therefore we don't need to use the RCU variant list_for_each_entry_rcu in any of the called functions. Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22btrfs: switch to RCU for device traversal in btrfs_ioctl_fs_infoDavid Sterba
We don't need to use the mutex as we do not modify the devices nor the list itself and just read information about device counts. Move copying fsid out of the protected section, not applicable to RCU same as the rest of the retrieved information. Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22btrfs: switch to RCU for device traversal in btrfs_ioctl_dev_infoDavid Sterba
We don't need to use the mutex as we do not modify the devices nor the list itself and just read some information: does not change during device lifetime: - devid - uuid - name (ie. the path) may change in parallel to the ioctl call, but can lead only to reporting inacurracy: - bytes_used - total_bytes Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22btrfs: simplify btrfs_close_bdevDavid Sterba
Split the conditions a bit. Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22btrfs: document device lockingDavid Sterba
Overview of the main locks protecting various device-related structures. Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22btrfs: simplify exit paths in btrfs_init_new_deviceDavid Sterba
Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22btrfs: use free_device where opencodedDavid Sterba
Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22btrfs: introduce free_device helperDavid Sterba
A helper to free a device and all it's dynamically allocated members, like the rcu_string name or flush_bio. This is going to replace all open coded places. Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22btrfs: rename device free rcu helper to free_device_rcuDavid Sterba
Make it clear that it is an RCU helper, we want to use the name free_device for a wrapper freeing all device members. Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22Btrfs: document rules about bio async submitLiu Bo
These rules have been hidden in several if-else and are not straightforward to follow, for example, dio submit hook's nocsum case has a bug , i.e. doing async submit instead of sync submit, which has been fixed recently. This is documenting the rules for reference. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22btrfs: Reduce scope of delayed_rsv->lock in may_commit_transNikolay Borisov
After commit 996478ca9c460886ac1 ("btrfs: change how we decide to commit transactions during flushing") there is no need to hold the delayed_rsv during the percpu_counter_compare call since we get the byte's snapshot earlier. So hold the lock only while reading delayed_rsv. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22Btrfs: add __init macro to btrfs init functionsLiu Bo
Adding __init macro gives kernel a hint that this function is only used during the initialization phase and its memory resources can be freed up after. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22btrfs: rename btrfs_add_device to btrfs_add_dev_itemAnand Jain
Function btrfs_add_device() is adding the device item so rename to reflect that in the function. Similarly we have btrfs_rm_dev_item(). Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22btrfs: Don't generate UUID for non-fs treeQu Wenruo
btrfs_create_tree() will unconditionally generate UUID for any root. So for quota tree and data reloc tree created by kernel, they will have unique UUIDs. However UUID in root item is only referred by UUID tree, which only records UUID for fs trees. This makes unique UUIDs for quota/data reloc tree meaningless. Leave the UUID as zero for non-fs tree, making btrfs-debug-tree output less confusing. Reported-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22btrfs: move volume_mutex into the btrfs_rm_device()Anand Jain
A cleanup patch no functional change, we hold volume_mutex before calling btrfs_rm_device, so move it into the function itself. Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22btrfs: Use locked_end rather than open coding itNikolay Borisov
Right before we go into this loop locked_end is set to alloc_end - 1 and is being used in nearby functions, no need to have exceptions. This just makes the code consistent, no functional changes. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22btrfs: Move loop termination condition in while()Nikolay Borisov
Fallocating a file in btrfs goes through several stages. The one before actually inserting the fallocated extents is to create a qgroup reservation, covering the desired range. To this end there is a loop in btrfs_fallocate which checks to see if there are holes in the fallocated range or !PREALLOC extents past EOF and if so create qgroup reservations for them. Unfortunately, the main condition of the loop is burried right at the end of its body rather than in the actual while statement which makes it non-obvious. Fix this by moving the condition in the while statement where it belongs. No functional changes. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22Btrfs: remove rcu_barrier in btrfs_close_devicesLiu Bo
It was introduced because btrfs used to do blkdev_put in a deferred work, now that btrfs has blkdev_put in place, this rcu_barrier can be removed. modprobe -r btrfs will do btrfs_cleanup_fs_uuids(), where it cleanup every %fs_devices on the list, but when we do btrfs_close_devices(), we have replaced the devices on the list with dummy ones which only have the same name and uuid, so modprobe -r btrfs will free those instead of what we were using, this change won't cause a problem for it. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> [ copied 2nd paragraph from mailinglist discussion ] Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22btrfs: Move checks from btrfs_wq_run_delayed_node to btrfs_balance_delayed_itemsNikolay Borisov
btrfs_balance_delayed_items is the sole caller of btrfs_wq_run_delayed_node and already includes one of the checks whether the delayed inodes should be run. On the other hand btrfs_wq_run_delayed_node duplicates that check and performs an additional one for wq congestion. Let's remove the duplicate check and move the congestion one in btrfs_balance_delayed_items, leaving btrfs_wq_run_delayed_node to only care about setting up the wq run. No functional changes. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22btrfs: Make btrfs_async_run_delayed_root use a loop rather than multiple labelsNikolay Borisov
Currently btrfs_async_run_delayed_root's implementation uses 3 goto labels to mimic the functionality of a simple do {} while loop. Refactor the function to use a do {} while construct, making intention clear and code easier to follow. No functional changes. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22btrfs: Remove redundant mirror_num argNikolay Borisov
The following callpath is always invoked with mirror_num set to 0, so let's remove it as an argument and directly pass 0 to __do_redpage. No functional change. extent_readpages __extent_readpages __do_contiguous_readpages __do_readpage Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22btrfs: Remove unused functionNikolay Borisov
It's sole callsite was removed in a previous patch so just nuke it for good. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22btrfs: Remove redundant memory barrier in dev statsNikolay Borisov
As per atomic_t.txt documentation : - RMW operations that have a return value are fully ordered; atomic_xchg is one such operation so it already includes everything it needs w.r.t memory ordering and add a comment to be more explicit about that. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22btrfs: Fix memory barriers usage with device stats countersNikolay Borisov
Commit addc3fa74e5b ("Btrfs: Fix the problem that the dirty flag of dev stats is cleared") reworked the way device stats changes are tracked. A new atomic dev_stats_ccnt counter was introduced which is incremented every time any of the device stats counters are changed. This serves as a flag whether there are any pending stats changes. However, this patch only partially implemented the correct memory barriers necessary: - It only ordered the stores to the counters but not the reads e.g. btrfs_run_dev_stats - It completely omitted any comments documenting the intended design and how the memory barriers pair with each-other This patch provides the necessary comments as well as adds a missing smp_rmb in btrfs_run_dev_stats. Furthermore since dev_stats_cnt is only a snapshot at best there was no point in reading the counter twice - once in btrfs_dev_stats_dirty and then again when assigning stats_cnt. Just collapse both reads into 1. Fixes: addc3fa74e5b ("Btrfs: Fix the problem that the dirty flag of dev stats is cleared") Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22btrfs: clean up btrfs_dev_stat_inc usageAnand Jain
btrfs_end_bio() is using btrfs_dev_stat_inc() and then btrfs_dev_stat_print_on_error() separately instead use btrfs_dev_stat_inc_and_print() directly. As of now there isn't any bio in btrfs which is - a non-empty write and also the REQ_PREFLUSH flag is set. So in actual the condition if (bio->bi_opf & REQ_PREFLUSH) is never true in btrfs_end_bio(), and so there won't be any redundant error log by using btrfs_dev_stat_inc_and_print() separately one for write and another for flush. This consolidation will help to add the device critical error handles in the function btrfs_dev_stat_inc_and_print() and which can be renamed as needed. Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22Btrfs: free btrfs_device in placeLiu Bo
It's pointless to defer it to a kthread helper as we're not under a special context. For reference, commit 1f78160ce1b1 ("Btrfs: using rcu lock in the reader side of devices list") introduced RCU freeing for device structures. Originally the blkdev_put was called from free_device and rcu_barrier had to be called. This is no longer required, bdev and our device structures are now freed separately. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> [ enhance changelog ] Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-22Btrfs: remove redundant btrfs_balance_delayed_itemsLiu Bo
In functions like btrfs_create(), we run both btrfs_balance_delayed_items() and btrfs_btree_balance_dirty() after the operation, but btrfs_btree_balance_dirty() is surely going to run btrfs_balance_delayed_items(). This keeps only btrfs_btree_balance_dirty(). Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-12error-injection: Add injectable error typesMasami Hiramatsu
Add injectable error types for each error-injectable function. One motivation of error injection test is to find software flaws, mistakes or mis-handlings of expectable errors. If we find such flaws by the test, that is a program bug, so we need to fix it. But if the tester miss input the error (e.g. just return success code without processing anything), it causes unexpected behavior even if the caller is correctly programmed to handle any errors. That is not what we want to test by error injection. To clarify what type of errors the caller must expect for each injectable function, this introduces injectable error types: - EI_ETYPE_NULL : means the function will return NULL if it fails. No ERR_PTR, just a NULL. - EI_ETYPE_ERRNO : means the function will return -ERRNO if it fails. - EI_ETYPE_ERRNO_NULL : means the function will return -ERRNO (ERR_PTR) or NULL. ALLOW_ERROR_INJECTION() macro is expanded to get one of NULL, ERRNO, ERRNO_NULL to record the error type for each function. e.g. ALLOW_ERROR_INJECTION(open_ctree, ERRNO) This error types are shown in debugfs as below. ==== / # cat /sys/kernel/debug/error_injection/list open_ctree [btrfs] ERRNO io_ctl_init [btrfs] ERRNO ==== Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-01-12error-injection: Separate error-injection from kprobeMasami Hiramatsu
Since error-injection framework is not limited to be used by kprobes, nor bpf. Other kernel subsystems can use it freely for checking safeness of error-injection, e.g. livepatch, ftrace etc. So this separate error-injection framework from kprobes. Some differences has been made: - "kprobe" word is removed from any APIs/structures. - BPF_ALLOW_ERROR_INJECTION() is renamed to ALLOW_ERROR_INJECTION() since it is not limited for BPF too. - CONFIG_FUNCTION_ERROR_INJECTION is the config item of this feature. It is automatically enabled if the arch supports error injection feature for kprobe or ftrace etc. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2018-01-06btrfs: avoid accessing bvec table directly for a cloned bioMing Lei
Commit 17347cec15f919901c90(Btrfs: change how we iterate bios in endio) mentioned that for dio the submitted bio may be fast cloned, we can't access the bvec table directly for a cloned bio, so use bio_get_first_bvec() to retrieve the 1st bvec. Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <jbacik@fb.com> Cc: David Sterba <dsterba@suse.com> Cc: linux-btrfs@vger.kernel.org Cc: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Acked: David Sterba <dsterba@suse.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-06btrfs: avoid access to .bi_vcnt directlyMing Lei
BTRFS uses bio->bi_vcnt to figure out page numbers, this approach is no longer valid once we start enabling multipage bvecs. correct once we start to enable multipage bvec. Use bio_nr_pages() to do that instead. Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <jbacik@fb.com> Cc: David Sterba <dsterba@suse.com> Cc: linux-btrfs@vger.kernel.org Acked-by: David Sterba <dsterba@suse.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-06fs: convert to bio_last_bvec_all()Ming Lei
This patch converts 3 users to bio_last_bvec_all(), so that we can go ahead and convert to multipage bvec. Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-06block: convert to bio_first_bvec_all & bio_first_page_allMing Lei
This patch converts to bio_first_bvec_all() & bio_first_page_all() for retrieving the 1st bvec/page, and prepares for supporting multipage bvec. Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-01-05Merge tag 'for-4.15-rc7-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "We have two more fixes for 4.15, both aimed for stable. The leak fix is obvious, the second patch fixes a bug revealed by the refcount API, when it behaves differently than previous atomic_t and reports refs going from 0 to 1 in one case" * tag 'for-4.15-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix refcount_t usage when deleting btrfs_delayed_nodes btrfs: Fix flush bio leak
2018-01-02btrfs: fix refcount_t usage when deleting btrfs_delayed_nodesChris Mason
refcounts have a generic implementation and an asm optimized one. The generic version has extra debugging to make sure that once a refcount goes to zero, refcount_inc won't increase it. The btrfs delayed inode code wasn't expecting this, and we're tripping over the warnings when the generic refcounts are used. We ended up with this race: Process A Process B btrfs_get_delayed_node() spin_lock(root->inode_lock) radix_tree_lookup() __btrfs_release_delayed_node() refcount_dec_and_test(&delayed_node->refs) our refcount is now zero refcount_add(2) <--- warning here, refcount unchanged spin_lock(root->inode_lock) radix_tree_delete() With the generic refcounts, we actually warn again when process B above tries to release his refcount because refcount_add() turned into a no-op. We saw this in production on older kernels without the asm optimized refcounts. The fix used here is to use refcount_inc_not_zero() to detect when the object is in the middle of being freed and return NULL. This is almost always the right answer anyway, since we usually end up pitching the delayed_node if it didn't have fresh data in it. This also changes __btrfs_release_delayed_node() to remove the extra check for zero refcounts before radix tree deletion. btrfs_get_delayed_node() was the only path that was allowing refcounts to go from zero to one. Fixes: 6de5f18e7b0da ("btrfs: fix refcount_t usage when deleting btrfs_delayed_node") CC: <stable@vger.kernel.org> # 4.12+ Signed-off-by: Chris Mason <clm@fb.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-02btrfs: Fix flush bio leakNikolay Borisov
Commit e0ae99941423 ("btrfs: preallocate device flush bio") reworked the way the flush bio is allocated and used. Concretely it allocates the bio in __alloc_device and then re-uses it multiple times with a very simple endio routine that just calls complete() without consuming a reference. Allocated bios by default come with a ref count of 1, which is then consumed by the endio routine (or not, in which case they should be bio_put by the caller). The way the impleementation works now is that the flush bio has a refcount of 2 and we only ever bio_put it once, leaving it to hang indefinitely. Fix this by removing the extra bio_get in __alloc_device. Fixes: e0ae99941423 ("btrfs: preallocate device flush bio") Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-01fs/*/Kconfig: drop links to 404-compliant http://acl.bestbits.atAdam Borowski
This link is replicated in most filesystems' config stanzas. Referring to an archived version of that site is pointless as it mostly deals with patches; user documentation is available elsewhere. Signed-off-by: Adam Borowski <kilobyte@angband.pl> CC: Alexander Viro <viro@zeniv.linux.org.uk> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com> Acked-by: David Sterba <dsterba@suse.com> Acked-by: "Yan, Zheng" <zyan@redhat.com> Acked-by: Chao Yu <yuchao0@huawei.com> Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> Acked-by: Steve French <smfrench@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-12-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2017-12-18 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Allow arbitrary function calls from one BPF function to another BPF function. As of today when writing BPF programs, __always_inline had to be used in the BPF C programs for all functions, unnecessarily causing LLVM to inflate code size. Handle this more naturally with support for BPF to BPF calls such that this __always_inline restriction can be overcome. As a result, it allows for better optimized code and finally enables to introduce core BPF libraries in the future that can be reused out of different projects. x86 and arm64 JIT support was added as well, from Alexei. 2) Add infrastructure for tagging functions as error injectable and allow for BPF to return arbitrary error values when BPF is attached via kprobes on those. This way of injecting errors generically eases testing and debugging without having to recompile or restart the kernel. Tags for opting-in for this facility are added with BPF_ALLOW_ERROR_INJECTION(), from Josef. 3) For BPF offload via nfp JIT, add support for bpf_xdp_adjust_head() helper call for XDP programs. First part of this work adds handling of BPF capabilities included in the firmware, and the later patches add support to the nfp verifier part and JIT as well as some small optimizations, from Jakub. 4) The bpftool now also gets support for basic cgroup BPF operations such as attaching, detaching and listing current BPF programs. As a requirement for the attach part, bpftool can now also load object files through 'bpftool prog load'. This reuses libbpf which we have in the kernel tree as well. bpftool-cgroup man page is added along with it, from Roman. 5) Back then commit e87c6bc3852b ("bpf: permit multiple bpf attachments for a single perf event") added support for attaching multiple BPF programs to a single perf event. Given they are configured through perf's ioctl() interface, the interface has been extended with a PERF_EVENT_IOC_QUERY_BPF command in this work in order to return an array of one or multiple BPF prog ids that are currently attached, from Yonghong. 6) Various minor fixes and cleanups to the bpftool's Makefile as well as a new 'uninstall' and 'doc-uninstall' target for removing bpftool itself or prior installed documentation related to it, from Quentin. 7) Add CONFIG_CGROUP_BPF=y to the BPF kernel selftest config file which is required for the test_dev_cgroup test case to run, from Naresh. 8) Fix reporting of XDP prog_flags for nfp driver, from Jakub. 9) Fix libbpf's exit code from the Makefile when libelf was not found in the system, also from Jakub. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>