summaryrefslogtreecommitdiff
path: root/include/drm/tinydrm/mipi-dbi.h
AgeCommit message (Collapse)Author
2019-07-25drm/tinydrm: Move mipi-dbiNoralf Trønnes
This moves mipi-dbi to be a core helper with the name drm_mipi_dbi. Fixup include's in drivers. Move the docs entry and delete tinydrm.rst. Delete the last tinydrm todo entry. v2: Make DRM_MIPI_DBI tristate to enable it being built as a module. Cc: Eric Anholt <eric@anholt.net> Cc: David Lechner <david@lechnology.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: David Lechner <david@lechnology.com> Acked-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190722104312.16184-9-noralf@tronnes.org
2019-07-25drm/tinydrm: Split struct mipi_dbi in twoNoralf Trønnes
Split struct mipi_dbi into an interface part and a display pipeline part. The interface part can be used by drivers that need to initialize the controller, but that won't upload the framebuffer over this interface. MIPI DBI supports 3 interface types: - A. Motorola 6800 type parallel bus - B. Intel 8080 type parallel bus - C. SPI type with 3 options: I've embedded the SPI type specifics in the mipi_dbi struct to avoid adding unnecessary complexity. If more interface types will be supported in the future, the type specifics might have to be split out. Rename functions to match the new struct mipi_dbi_dev: - drm_to_mipi_dbi() -> drm_to_mipi_dbi_dev(). - mipi_dbi_init*() -> mipi_dbi_dev_init*(). Cc: Eric Anholt <eric@anholt.net> Cc: David Lechner <david@lechnology.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: David Lechner <david@lechnology.com> Acked-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190722104312.16184-5-noralf@tronnes.org
2019-07-25drm/tinydrm: Rename remaining variable mipi -> dbidevNoralf Trønnes
struct mipi_dbi is going to be split into an interface part and a display pipeline part. The interface part can be used by drivers that need to initialize the controller, but that won't upload the framebuffer over this interface. tinydrm uses the variable name 'mipi' but this is not a good name since MIPI refers to a lot of standards. This patch changes the variable name to 'dbidev' where it refers to the pipeline part of struct mipi_dbi. Cc: Eric Anholt <eric@anholt.net> Cc: David Lechner <david@lechnology.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: David Lechner <david@lechnology.com> Acked-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190722104312.16184-4-noralf@tronnes.org
2019-07-25drm/tinydrm: Rename variable mipi -> dbiNoralf Trønnes
struct mipi_dbi is going to be split into an interface part and a display pipeline part. The interface part can be used by drivers that need to initialize the controller, but that won't upload the framebuffer over this interface. tinydrm uses the variable name 'mipi' but this is not a good name since MIPI refers to a lot of standards. This patch changes the variable name to 'dbi' where it refers to the interface part of struct mipi_dbi. Functions that use both future parts will have both variables temporarily pointing to the same structure. Cc: Eric Anholt <eric@anholt.net> Cc: David Lechner <david@lechnology.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: David Lechner <david@lechnology.com> Acked-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190722104312.16184-3-noralf@tronnes.org
2019-07-23drm/tinydrm: Move tinydrm_display_pipe_init() to mipi-dbiNoralf Trønnes
tinydrm_display_pipe_init() has only one user now, so move it to mipi-dbi. Changes: - Remove drm_connector_helper_funcs.detect, it's always connected. - Store the connector and mode in mipi_dbi instead of it's own struct. Otherwise remove some leftover tinydrm-helpers.h inclusions. Cc: Eric Anholt <eric@anholt.net> Cc: David Lechner <david@lechnology.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-12-noralf@tronnes.org
2019-07-23drm/tinydrm/mipi-dbi: Add mipi_dbi_init_with_formats()Noralf Trønnes
The MIPI DBI standard support more pixel formats than what this helper supports. Add an init function that lets the driver use different format(s). This avoids open coding mipi_dbi_init() in st7586. st7586 sets preferred_depth but this is not necessary since it only supports one format. v2: Forgot to remove the mipi->rotation assignment in st7586, mipi_dbi_init_with_formats() handles it. Cc: David Lechner <david@lechnology.com> Acked-by: David Lechner <david@lechnology.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: David Lechner <david@lechnology.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-11-noralf@tronnes.org
2019-07-23drm/tinydrm: Move tinydrm_spi_transfer()Noralf Trønnes
This is only used by mipi-dbi drivers so move it there. The reason this isn't moved to the SPI subsystem is that it will in a later patch pass a dummy rx buffer for SPI controllers that need this. Low memory boards (64MB) can run into a problem allocating such a "large" contiguous buffer on every transfer after a long up time. This leaves a very specific use case, so we'll keep the function here. mipi-dbi will first go through a refactoring though, before this will be done. Remove SPI todo entry now that we're done with the tinydrm.ko SPI code. v2: Drop moving the mipi_dbi_spi_init() declaration (Sam) Cc: David Lechner <david@lechnology.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: : David Lechner <david@lechnology.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-8-noralf@tronnes.org
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-20tinydrm/mipi-dbi: Use dma-safe buffers for all SPI transfersNoralf Trønnes
Buffers passed to spi_sync() must be dma-safe even for tiny buffers since some SPI controllers use DMA for all transfers. Example splat with CONFIG_DMA_API_DEBUG enabled: [ 23.750467] DMA-API: dw_dmac_pci 0000:00:15.0: device driver maps memory from stack [probable addr=000000001e49185d] [ 23.750529] WARNING: CPU: 1 PID: 1296 at kernel/dma/debug.c:1161 check_for_stack+0xb7/0x190 [ 23.750533] Modules linked in: mmc_block(+) spi_pxa2xx_platform(+) pwm_lpss_pci pwm_lpss spi_pxa2xx_pci sdhci_pci cqhci intel_mrfld_pwrbtn extcon_intel_mrfld sdhci intel_mrfld_adc led_class mmc_core ili9341 mipi_dbi tinydrm backlight ti_ads7950 industrialio_triggered_buffer kfifo_buf intel_soc_pmic_mrfld hci_uart btbcm [ 23.750599] CPU: 1 PID: 1296 Comm: modprobe Not tainted 5.0.0-rc7+ #236 [ 23.750605] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48 [ 23.750620] RIP: 0010:check_for_stack+0xb7/0x190 [ 23.750630] Code: 8b 6d 50 4d 85 ed 75 04 4c 8b 6d 10 48 89 ef e8 2f 8b 44 00 48 89 c6 4a 8d 0c 23 4c 89 ea 48 c7 c7 88 d0 82 b4 e8 40 7c f9 ff <0f> 0b 8b 05 79 00 4b 01 85 c0 74 07 5b 5d 41 5c 41 5d c3 8b 05 54 [ 23.750637] RSP: 0000:ffff97bbc0292fa0 EFLAGS: 00010286 [ 23.750646] RAX: 0000000000000000 RBX: ffff97bbc0290000 RCX: 0000000000000006 [ 23.750652] RDX: 0000000000000007 RSI: 0000000000000002 RDI: ffff94b33e115450 [ 23.750658] RBP: ffff94b33c8578b0 R08: 0000000000000002 R09: 00000000000201c0 [ 23.750664] R10: 00000006ecb0ccc6 R11: 0000000000034f38 R12: 000000000000316c [ 23.750670] R13: ffff94b33c84b250 R14: ffff94b33dedd5a0 R15: 0000000000000001 [ 23.750679] FS: 0000000000000000(0000) GS:ffff94b33e100000(0063) knlGS:00000000f7faf690 [ 23.750686] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 23.750691] CR2: 00000000f7f54faf CR3: 000000000722c000 CR4: 00000000001006e0 [ 23.750696] Call Trace: [ 23.750713] debug_dma_map_sg+0x100/0x340 [ 23.750727] ? dma_direct_map_sg+0x3b/0xb0 [ 23.750739] spi_map_buf+0x25a/0x300 [ 23.750751] __spi_pump_messages+0x2a4/0x680 [ 23.750762] __spi_sync+0x1dd/0x1f0 [ 23.750773] spi_sync+0x26/0x40 [ 23.750790] mipi_dbi_typec3_command_read+0x14d/0x240 [mipi_dbi] [ 23.750802] ? spi_finalize_current_transfer+0x10/0x10 [ 23.750821] mipi_dbi_typec3_command+0x1bc/0x1d0 [mipi_dbi] Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190222124329.23046-1-noralf@tronnes.org
2019-03-04drm/tinydrm: Drop using tinydrm_deviceNoralf Trønnes
Use devm_drm_dev_init() and drop using tinydrm_device. v2: devm_drm_dev_register() was dropped so add driver release callbacks. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-6-noralf@tronnes.org
2019-02-21drm/tinydrm/mipi-dbi: Add drm_to_mipi_dbi()Noralf Trønnes
Add a function to derive mipi_dbi from drm_device now that tinydrm_device is going away. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190210131039.52664-8-noralf@tronnes.org
2019-01-17drm/tinydrm: Use damage helper for dirtyfbNoralf Trønnes
This switches to drm_atomic_helper_dirtyfb() as the framebuffer dirty handler. All flushing will now happen in the pipe functions. Also enable the damage plane property for all except repaper which can only do full updates. ili9225: This change made ili9225_init() equal to mipi_dbi_init() so use it. v3: Include vblank header (Sam) ili9225 and st7586 can't use mipi_dbi_enable_flush() (David) v2: Remove fb check in mipi_dbi_enable_flush() it can't be NULL (kbuild test robot) Cc: David Lechner <david@lechnology.com> Cc: Eric Anholt <eric@anholt.net> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: David Lechner <david@lechnology.com> Reviewed-by: David Lechner <david@lechnology.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190115043643.2364-5-noralf@tronnes.org
2019-01-17drm/tinydrm: Use struct drm_rectNoralf Trønnes
This prepares for the switch to drm_atomic_helper_dirtyfb() in the next patch. The damage helper returns a drm_rect so switch to that everywhere including using a pointer in the dirty functions. This is a non-functional change except for the debug print which looks a bit different. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190115043643.2364-4-noralf@tronnes.org
2018-03-28drm/tinydrm: Make fb_dirty into a lower level hookVille Syrjälä
mipi_dbi_enable_flush() wants to call the fb->dirty() hook from the bowels of the .atomic_enable() hook. That prevents us from taking the plane mutex in fb->dirty() unless we also plumb down the acquire context. Instead it seems simpler to split the fb->dirty() into a tinydrm specific lower level hook that can be called from mipi_dbi_enable_flush() and from a generic higher level tinydrm_fb_dirty() helper. As we don't have a tinydrm specific vfuncs table we'll just stick it into tinydrm_device directly for now. v2: Deal with the fb->dirty() in tinydrm_display_pipe_update() as well (Noralf) Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: David Lechner <david@lechnology.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180323153509.15287-1-ville.syrjala@linux.intel.com Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Noralf Trønnes <noralf@tronnes.org>
2018-01-15drm/tinydrm/mi0283qt: Let the display pipe handle powerNoralf Trønnes
It's better to leave power handling and controller init to the modesetting machinery using the simple pipe .enable and .disable callbacks. Remove unused mipi_dbi_pipe_enable(). Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: David Lechner <david@lechnology.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180110185940.53841-6-noralf@tronnes.org
2018-01-15drm/tinydrm/mipi-dbi: Add poweron-reset functionsNoralf Trønnes
Split out common poweron-reset functionality. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180110185940.53841-5-noralf@tronnes.org
2018-01-15drm/tinydrm/mipi-dbi: Add mipi_dbi_enable_flush()Noralf Trønnes
Add and use a function for enabling, flushing and turning on backlight. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: David Lechner <david@lechnology.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180110185940.53841-4-noralf@tronnes.org
2017-12-01drm/tinydrm: export mipi_dbi_buf_copy and mipi_dbi_spi_cmd_max_speedDavid Lechner
This exports the mipi_dbi_buf_copy() and mipi_dbi_spi_cmd_max_speed() functions so that they can be shared with other drivers. Signed-off-by: David Lechner <david@lechnology.com> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/1511122328-31133-4-git-send-email-david@lechnology.com
2017-08-04drm/tinydrm: remove call to mipi_dbi_init() from mipi_dbi_spi_init()David Lechner
This removes the call to mipi_dbi_init() from mipi_dbi_spi_init() so that drivers can have a driver-specific implementation if needed. Suggested-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: David Lechner <david@lechnology.com> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/1501799630-1650-2-git-send-email-david@lechnology.com
2017-02-18drm/tinydrm: Add MIPI DBI supportNoralf Trønnes
Add support for MIPI DBI compatible controllers. Interface type C option 1 and 3 are supported (SPI). Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Thierry Reding <treding@nvidia.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-26 10:23:10 +0000