summaryrefslogtreecommitdiff
path: root/include/dt-bindings/clock
AgeCommit message (Collapse)Author
2024-05-18Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "I'm actually surprised this time. There aren't any new Qualcomm SoC clk drivers. And there's zero diff in the core clk framework. Instead we have new clk drivers for STM and Sophgo, with Samsung^WGoogle in third for the diffstat because they introduced HSI0 and HSI2 clk drivers for Google's GS101 SoC (high speed interface things like PCIe, UFS, and MMC). Beyond those big diffs there's the usual updates to various clk drivers for incorrect parent descriptions or mising MODULE_DEVICE_TABLE()s, etc. Nothing in particular stands out as super interesting here. New Drivers: - STM32MP257 SoC clk driver - Airoha EN7581 SoC clk driver - Sophgo CV1800B, CV1812H and SG2000 SoC clk driver - Loongson-2k0500 and Loongson-2k2000 SoC clk driver - Add HSI0 and HSI2 clock controllers for Google GS101 - Add i.MX95 BLK CTL clock driver Updates: - Allocate clk_ops dynamically for SCMI clk driver - Add support in qcom RCG and RCG2 for multiple configurations for the same frequency - Use above support for IPQ8074 NSS port 5 and 6 clocks to resolve issues - Fix the Qualcomm APSS IPQ5018 PLL to fix boot failures of some boards - Cleanups and fixes for Qualcomm Stromer PLLs - Reduce max CPU frequency on Qualcomm APSS IPQ5018 - Fix Kconfig dependencies of Qualcomm SM8650 GPU and SC8280XP camera clk drivers - Make Qualcomm MSM8998 Venus clocks functional - Cleanup downstream remnants related to DisplayPort across Qualcomm SM8450, SM6350, SM8550, and SM8650 - Reuse the Huayra APSS register map on Qualcomm MSM8996 CBF PLL - Use a specific Qualcomm QCS404 compatible for the otherwise generic HFPLL - Remove Qualcomm SM8150 CPUSS AHB clk as it is unused - Remove an unused field in the Qualcomm RPM clk driver - Add missing MODULE_DEVICE_TABLE to Qualcomm MSM8917 and MSM8953 global clock controller drivers - Allow choice of manual or firmware-driven control over PLLs, needed to fully implement CPU clock controllers on Exynos850 - Correct PLL clock IDs on ExynosAutov9 - Propagate certain clock rates to allow setting proper SPI clock rates on Google GS101 - Mark certain Google GS101 clocks critical - Convert old S3C64xx clock controller bindings to DT schema - Add new PLL rate and missing mux on Rockchip rk3568 - Add missing reset line on Rockchip rk3588 - Removal of an unused field in struct rockchip_mmc_clock - Amlogic s4/a1: add regmap maximum register for proper debugfs dump - Amlogic s4: add MODULE_DEVICE_TABLE() on pll and periph controllers - Amlogic pll driver: print clock name on lock error to help debug - Amlogic vclk: finish dsi clock path support - Amlogic license: fix occurence "GPL v2" as reported by checkpatch - Add PM runtime support to i.MX8MP Audiomix - Add DT schema for i.MX95 Display Master Block Control - Convert to platform remove callback returning void for i.MX8MP Audiomix - Add SPI (MSIOF) and external interrupt (INTC-EX) clocks on Renesas R-Car V4M - Add interrupt controller (PLIC) clock and reset on Renesas RZ/Five - Prepare power domain support for Renesas RZ/G2L family members, and add actual support on Renesas RZ/G3S SoC - Add thermal, serial (SCIF), and timer (CMT/TMU) clocks on Renesas R-Car V4M - Add additional constraints to Allwinner A64 PLL MIPI clock - Fix autoloading sunxi-ng clocks when build as a module" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (118 commits) clk: samsung: Don't register clkdev lookup for the fixed rate clocks clk, reset: microchip: mpfs: fix incorrect preprocessor conditions clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLs clk: qcom: apss-ipq-pll: fix PLL rate for IPQ5018 clk: qcom: Fix SM_GPUCC_8650 dependencies clk: qcom: Fix SC_CAMCC_8280XP dependencies dt-bindings: clocks: stm32mp25: add access-controllers description clock, reset: microchip: move all mpfs reset code to the reset subsystem clk: samsung: gs101: drop unused HSI2 clock parent data clk: rockchip: rk3568: Add PLL rate for 724 MHz clk: rockchip: Remove an unused field in struct rockchip_mmc_clock dt-bindings: clock: fixed: Define a preferred node name clk: meson: s4: fix module autoloading clk: samsung: gs101: mark some apm UASC and XIU clocks critical clk: imx: imx8mp: Convert to platform remove callback returning void clk: imx: imx8mp: Switch to RUNTIME_PM_OPS() clk: bcm: rpi: Assign ->num before accessing ->hws clk: bcm: dvp: Assign ->num before accessing ->hws clk: samsung: gs101: add support for cmu_hsi2 clk: samsung: gs101: add support for cmu_hsi0 ...
2024-05-16Merge branches 'clk-microchip', 'clk-samsung' and 'clk-qcom' into clk-nextStephen Boyd
* clk-microchip: clk, reset: microchip: mpfs: fix incorrect preprocessor conditions clock, reset: microchip: move all mpfs reset code to the reset subsystem * clk-samsung: clk: samsung: Don't register clkdev lookup for the fixed rate clocks clk: samsung: gs101: drop unused HSI2 clock parent data clk: samsung: gs101: mark some apm UASC and XIU clocks critical clk: samsung: gs101: add support for cmu_hsi2 clk: samsung: gs101: add support for cmu_hsi0 dt-bindings: clock: google,gs101-clock: add HSI2 clock management unit dt-bindings: clock: google,gs101-clock: add HSI0 clock management unit clk: samsung: gs101: propagate PERIC1 USI SPI clock rate clk: samsung: gs101: propagate PERIC0 USI SPI clock rate clk: samsung: exynosautov9: fix wrong pll clock id value dt-bindings: clock: samsung,s3c6400-clock: convert to DT Schema clk: samsung: exynos850: Add CMU_CPUCL0 and CMU_CPUCL1 clk: samsung: Implement manual PLL control for ARM64 SoCs * clk-qcom: (27 commits) clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLs clk: qcom: apss-ipq-pll: fix PLL rate for IPQ5018 clk: qcom: Fix SM_GPUCC_8650 dependencies clk: qcom: Fix SC_CAMCC_8280XP dependencies clk: qcom: mmcc-msm8998: fix venus clock issue clk: qcom: dispcc-sm8650: fix DisplayPort clocks clk: qcom: dispcc-sm8550: fix DisplayPort clocks clk: qcom: dispcc-sm6350: fix DisplayPort clocks clk: qcom: dispcc-sm8450: fix DisplayPort clocks clk: qcom: clk-cbf-8996: use HUAYRA_APSS register map for cbf_pll clk: qcom: apss-ipq-pll: constify clk_init_data structures clk: qcom: apss-ipq-pll: constify match data structures clk: qcom: apss-ipq-pll: move Huayra register map to 'clk_alpha_pll_regs' clk: qcom: apss-ipq-pll: reuse Stromer reg offsets from 'clk_alpha_pll_regs' clk: qcom: apss-ipq-pll: use stromer ops for IPQ5018 to fix boot failure clk: qcom: gcc-ipq8074: rework nss_port5/6 clock to multiple conf clk: qcom: clk-rcg2: add support for rcg2 freq multi ops clk: qcom: clk-rcg: introduce support for multiple conf for same freq clk: qcom: hfpll: Add QCS404-specific compatible dt-bindings: clock: qcom,hfpll: Convert to YAML ...
2024-05-16Merge branches 'clk-counted', 'clk-imx', 'clk-amlogic', 'clk-binding' and ↵Stephen Boyd
'clk-rockchip' into clk-next * clk-counted: clk: bcm: rpi: Assign ->num before accessing ->hws clk: bcm: dvp: Assign ->num before accessing ->hws * clk-imx: clk: imx: imx8mp: Convert to platform remove callback returning void clk: imx: imx8mp: Switch to RUNTIME_PM_OPS() clk: imx: add i.MX95 BLK CTL clk driver dt-bindings: clock: support i.MX95 Display Master CSR module dt-bindings: clock: support i.MX95 BLK CTL module dt-bindings: clock: add i.MX95 clock header clk: imx: imx8mp: Add pm_runtime support for power saving * clk-amlogic: clk: meson: s4: fix module autoloading clk: meson: fix module license to GPL only clk: meson: g12a: make VCLK2 and ENCL clock path configurable by CCF clk: meson: add vclk driver clk: meson: pll: print out pll name when unable to lock it clk: meson: s4: pll: determine maximum register in regmap config clk: meson: s4: peripherals: determine maximum register in regmap config clk: meson: a1: pll: determine maximum register in regmap config clk: meson: a1: peripherals: determine maximum register in regmap config * clk-binding: dt-bindings: clock: fixed: Define a preferred node name * clk-rockchip: clk: rockchip: rk3568: Add PLL rate for 724 MHz clk: rockchip: Remove an unused field in struct rockchip_mmc_clock clk: rockchip: rk3588: Add reset line for HDMI Receiver clk: rockchip: rk3568: Add missing USB480M_PHY mux dt-bindings: reset: Define reset id used for HDMI Receiver dt-bindings: clock: rockchip: add USB480M_PHY mux
2024-05-16Merge branches 'clk-stm', 'clk-renesas', 'clk-scmi' and 'clk-allwinner' into ↵Stephen Boyd
clk-next - STM32MP257 SoC clk driver - Allocate clk_ops dynamically for SCMI clk driver * clk-stm: dt-bindings: clocks: stm32mp25: add access-controllers description clk: stm32: introduce clocks for STM32MP257 platform dt-bindings: clocks: stm32mp25: add description of all parents clk: stm32mp13: use platform device APIs * clk-renesas: clk: renesas: r9a08g045: Add support for power domains clk: renesas: rzg2l: Extend power domain support dt-bindings: clock: renesas,rzg2l-cpg: Update #power-domain-cells = <1> for RZ/G3S dt-bindings: clock: r9a08g045-cpg: Add power domain IDs dt-bindings: clock: r9a07g054-cpg: Add power domain IDs dt-bindings: clock: r9a07g044-cpg: Add power domain IDs dt-bindings: clock: r9a07g043-cpg: Add power domain IDs clk: renesas: shmobile: Remove unused CLK_ENABLE_ON_INIT clk: renesas: r8a7740: Remove unused div4_clk.flags field clk: renesas: r9a07g043: Add clock and reset entry for PLIC clk: renesas: r8a779h0: Add INTC-EX clock clk: renesas: r8a779h0: Add MSIOF clocks clk: renesas: r8a779a0: Fix CANFD parent clock clk: rs9: fix wrong default value for clock amplitude clk: renesas: r8a779h0: Add timer clocks clk: renesas: r8a779h0: Add SCIF clocks clk: renesas: r9a07g044: Mark resets array as const clk: renesas: r9a07g043: Mark mod_clks and resets arrays as const clk: renesas: r8a779h0: Add thermal clock dt-bindings: clock: r9a07g043-cpg: Annotate RZ/G2UL-only core clocks * clk-scmi: clk: scmi: Add support for get/set duty_cycle operations clk: scmi: Add support for re-parenting restricted clocks clk: scmi: Add support for rate change restricted clocks clk: scmi: Add support for state control restricted clocks clk: scmi: Allocate CLK operations dynamically * clk-allwinner: clk: sunxi-ng: fix module autoloading clk: sunxi-ng: a64: Add constraints on PLL-MIPI's n/m ratio and parent rate clk: sunxi-ng: nkm: Support constraints on m/n ratio and parent rate
2024-05-07Merge tag 'samsung-dt64-6.10-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt Samsung DTS ARM64 changes for v6.10, part two Few changes exclusively for Google GS101: 1. Add HSI0 and HSI2 clock controllers (CMUs). 2. Add USB 3.1 Dual Role Device (DRD) support. 3. Add UFS (Universal Flash Storage) support. 4. Document bus clocks in pin controllers necessary for accessing registers. * tag 'samsung-dt64-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: gs101: specify empty clocks for remaining pinctrl arm64: dts: exynos: gs101: specify bus clock for pinctrl_hsi2 arm64: dts: exynos: gs101: specify bus clock for pinctrl_peric[01] arm64: dts: exynos: gs101: specify bus clock for pinctrl (far) alive arm64: dts: exynos: gs101: enable ufs, phy on oriole & define ufs regulator arm64: dts: exynos: gs101: Add ufs and ufs-phy dt nodes arm64: dts: exynos: gs101: Add the hsi2 sysreg node dt-bindings: soc: google: exynos-sysreg: add dedicated hsi2 sysreg compatible arm64: dts: exynos: gs101-oriole: enable USB on this board arm64: dts: exynos: gs101: add USB & USB-phy nodes arm64: dts: exynos: gs101: enable cmu-hsi2 clock controller arm64: dts: exynos: gs101: enable cmu-hsi0 clock controller dt-bindings: clock: google,gs101-clock: add HSI2 clock management unit dt-bindings: clock: google,gs101-clock: add HSI0 clock management unit Link: https://lore.kernel.org/r/20240504121233.7589-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-04-29dt-bindings: clock: google,gs101-clock: add HSI2 clock management unitPeter Griffin
Add dt schema documentation and clock IDs for the High Speed Interface 2 (HSI2) clock management unit. This CMU feeds high speed interfaces such as PCIe and UFS. [AD: * keep CMUs in google,gs101.h sorted alphabetically * resolve minor merge conflicts in google,gs101-clock.yaml * s/ufs_embd/ufs s/mmc_card/mmc Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: André Draszik <andre.draszik@linaro.org> Link: https://lore.kernel.org/r/20240429-hsi0-gs101-v3-1-f233be0a2455@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-04-25dt-bindings: clock: r9a08g045-cpg: Add power domain IDsClaudiu Beznea
Add power domain IDs for the RZ/G3S (R9A08G045) SoC. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20240422105355.1622177-5-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-04-25dt-bindings: clock: r9a07g054-cpg: Add power domain IDsClaudiu Beznea
Add power domain IDs for the RZ/V2L (R9A07G054) SoC. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20240422105355.1622177-4-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-04-25dt-bindings: clock: r9a07g044-cpg: Add power domain IDsClaudiu Beznea
Add power domain IDs for the RZ/G2L (R9A07G044) SoC. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20240422105355.1622177-3-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-04-25dt-bindings: clock: r9a07g043-cpg: Add power domain IDsClaudiu Beznea
Add power domain IDs for the RZ/G2UL (R9A07G043) SoC. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20240422105355.1622177-2-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-04-25dt-bindings: clock: google,gs101-clock: add HSI0 clock management unitAndré Draszik
Add dt-schema documentation and clock IDs for the high speed interface 0 HSI0 clock management unit. This is used (amongst others) for USB. While the usual (sed) script has been used to derive the linux clock IDs from the data sheet, one manual tweak was applied to fix a typo which we don't want to carry: HSI0_USPDPDBG_USER -> HSI0_USBDPDBG_USER (note USB vs USP). Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20240423-hsi0-gs101-v1-1-2c3ddb50c720@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-04-22dt-bindings: clock: add i.MX95 clock headerPeng Fan
Add clock header for i.MX95 BLK CTL modules Signed-off-by: Peng Fan <peng.fan@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20240401-imx95-blk-ctl-v6-1-84d4eca1e759@nxp.com Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2024-04-11dt-bindings: clock: Add Loongson-2K expand clock indexBinbin Zhou
In the new Loongson-2K family of SoCs, more clock indexes are needed, such as clock gates. The patch adds these clock indexes Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/76844e0e4dae290425f7c8025f7f36810cb3a3a8.1712731524.git.zhoubinbin@loongson.cn Acked-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-04-10dt-bindings: clock: rockchip: add USB480M_PHY muxSascha Hauer
The USB480M clock can source from a MUX that selects the clock to come from either of the USB-phy internal 480MHz PLLs. These clocks are provided by the USB phy driver. This adds the define for it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240405-clk-rk3568-usb480m-phy-mux-v1-1-6c89de20a6ff@pengutronix.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-03-26dt-bindings: clock: r9a07g043-cpg: Annotate RZ/G2UL-only core clocksGeert Uytterhoeven
The M2 (CRU main clock), M3 (LCDC Video Clock), and AT (Cortex-A55 Debug clock) core clocks are only present on RZ/G2UL, not on RZ/Five. Annotate this in the comments, like is already done for module clocks and resets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/ffcdcd479c76b92f67481836a33ec86e97f85634.1708944903.git.geert+renesas@glider.be
2024-03-26ARM: dts: renesas: r8a73a4: Add TMU nodesGeert Uytterhoeven
Add device nodes for the Timer Units (TMU) on the R-Mobile APE6 SoC, and the clocks serving them. Note that TMU channels 1 and 2 are not added, as their interrupts are not wired to the interrupt controller for the AP-System Core (INTC-SYS), only to the interrupt controller for the AP-Realtime Core (INTC-RT). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/1a60832f3ba37afb4a5791f4e5db4610ab31beb3.1710864964.git.geert+renesas@glider.be
2024-03-13Merge branches 'clk-samsung', 'clk-imx', 'clk-rockchip', 'clk-clkdev' and ↵Stephen Boyd
'clk-rate-exclusive' into clk-next - Increase dev_id len for clkdev lookups * clk-samsung: (25 commits) clk: samsung: Add CPU clock support for Exynos850 clk: samsung: Pass mask to wait_until_mux_stable() clk: samsung: Keep register offsets in chip specific structure clk: samsung: Keep CPU clock chip specific data in a dedicated struct clk: samsung: Pass register layout type explicitly to CLK_CPU() clk: samsung: Pass actual CPU clock registers base to CPU_CLK() clk: samsung: Group CPU clock functions by chip clk: samsung: Use single CPU clock notifier callback for all chips clk: samsung: Reduce params count in exynos_register_cpu_clock() clk: samsung: Pull struct exynos_cpuclk into clk-cpu.c clk: samsung: Improve clk-cpu.c style dt-bindings: clock: exynos850: Add CMU_CPUCLK0 and CMU_CPUCL1 clk: samsung: gs101: add support for cmu_peric1 clk: samsung: gs101: drop extra empty line dt-bindings: clock: google,gs101-clock: add PERIC1 clock management unit clk: samsung: exynos850: Propagate SPI IPCLK rate change clk: samsung: gs101: gpio_peric0_pclk needs to be kept on clk: samsung: exynos850: Add PDMA clocks dt-bindings: clock: tesla,fsd: Fix spelling mistake clk: samsung: gs101: add support for cmu_peric0 ... * clk-imx: clk: imx: imx8mp: Fix SAI_MCLK_SEL definition clk: imx: scu: Use common error handling code in imx_clk_scu_alloc_dev() clk: imx: composite-8m: Delete two unnecessary initialisations in __imx8m_clk_hw_composite() clk: imx: composite-8m: Less function calls in __imx8m_clk_hw_composite() after error detection * clk-rockchip: clk: rockchip: rk3399: Allow to set rate of clk_i2s0_frac's parent clk: rockchip: rk3588: use linked clock ID for GATE_LINK clk: rockchip: rk3588: fix indent clk: rockchip: rk3588: fix pclk_vo0grf and pclk_vo1grf dt-bindings: clock: rk3588: add missing PCLK_VO1GRF dt-bindings: clock: rk3588: drop CLK_NR_CLKS clk: rockchip: rk3588: fix CLK_NR_CLKS usage clk: rockchip: rk3568: Add PLL rate for 128MHz * clk-clkdev: clkdev: Update clkdev id usage to allow for longer names * clk-rate-exclusive: clk: Add a devm variant of clk_rate_exclusive_get()
2024-03-13Merge branches 'clk-remove', 'clk-amlogic', 'clk-qcom', 'clk-parent' and ↵Stephen Boyd
'clk-microchip' into clk-next * clk-remove: clk: starfive: jh7110-vout: Convert to platform remove callback returning void clk: starfive: jh7110-isp: Convert to platform remove callback returning void clk: imx: imx8-acm: Convert to platform remove callback returning void * clk-amlogic: clk: meson: Add missing clocks to axg_clk_regmaps * clk-qcom: (62 commits) clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES reset clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk' clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk' clk: qcom: camcc-x1e80100: Fix missing DT_IFACE enum in x1e80100 camcc clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays clk: qcom: dispcc-sdm845: Adjust internal GDSC wait times dt-bindings: clk: qcom: drop the SC7180 Modem subsystem clock controller clk: qcom: drop the SC7180 Modem subsystem clock driver clk: qcom: Use qcom_branch_set_clk_en() clk: qcom: branch: Add a helper for setting the enable bit clk: qcom: dispcc-sm8250: Make clk_init_data and pll_vco const clk: qcom: gcc-sc8180x: Add missing UFS QREF clocks clk: qcom: gcc-msm8953: add more resets clk: qcom: videocc-*: switch to module_platform_driver ... * clk-parent: clk: Fix clk_core_get NULL dereference * clk-microchip: clk: microchip: mpfs: convert MSSPLL outputs to clk_divider clk: microchip: mpfs: add missing MSSPLL outputs clk: microchip: mpfs: setup for using other mss pll outputs clk: microchip: mpfs: split MSSPLL in two dt-bindings: can: mpfs: add missing required clock dt-bindings: clock: mpfs: add more MSSPLL output definitions
2024-03-13Merge branches 'clk-aspeed', 'clk-keystone', 'clk-mobileye' and ↵Stephen Boyd
'clk-allwinner' into clk-next * clk-aspeed: clk: ast2600: Add FSI parent clock with correct rate dt-bindings: clock: ast2600: Add FSI clock * clk-keystone: clk: keystone: sci-clk: Adding support for non contiguous clocks * clk-mobileye: dt-bindings: reset: mobileye,eyeq5-reset: add bindings dt-bindings: clock: mobileye,eyeq5-clk: add bindings clk: fixed-factor: add fwname-based constructor functions clk: fixed-factor: add optional accuracy support * clk-allwinner: clk: sunxi: usb: fix kernel-doc warnings clk: sunxi: sun9i-cpus: fix kernel-doc warnings clk: sunxi: a20-gmac: fix kernel-doc warnings
2024-02-27dt-bindings: clock: rk3588: add missing PCLK_VO1GRFSebastian Reichel
Add PCLK_VO1GRF to complement PCLK_VO0GRF. This will be needed for HDMI support. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20240126182919.48402-4-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-02-27dt-bindings: clock: rk3588: drop CLK_NR_CLKSSebastian Reichel
CLK_NR_CLKS should not be part of the binding. Let's drop it, since the kernel code no longer uses it either. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20240126182919.48402-3-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-02-25dt-bindings: clock: exynos850: Add CMU_CPUCLK0 and CMU_CPUCL1Sam Protsenko
Document CPU clock management unit compatibles and add corresponding clock indices. Exynos850 has two CPU clusters (CL0 and CL1), each containing 4 Cortex-A55 cores. CPU PLLs are generating main CPU clocks for each cluster, and there are alternate ("switch") clocks that can be used temporarily while re-configuring the PLL for the new rate. ACLK, ATCLK, PCLKDBG and PERIPHCLK clocks are driving corresponding buses. CLK_CLUSTERx_SCLK are actual leaf CPU clocks and should be used to change CPU rates. Also some CoreSight clocks can be derived from DBG_USER (debug clock). Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20240224202053.25313-2-semen.protsenko@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-02-21dt-bindings: clock: mobileye,eyeq5-clk: add bindingsThéo Lebrun
Add DT schema bindings for the EyeQ5 clock controller driver. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://lore.kernel.org/r/20240221-mbly-clk-v7-3-31d4ce3630c3@bootlin.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-02-21dt-bindings: clock: ast2600: Add FSI clockEddie James
Add a definition for the FSI clock. Signed-off-by: Eddie James <eajames@linux.ibm.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240215220759.976998-2-eajames@linux.ibm.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-02-13clk: renesas: r8a779g0: Correct PFC/GPIO parent clocksGeert Uytterhoeven
According to the R-Car V4H Series Hardware User’s Manual Rev.1.00, the parent clock of the Pin Function (PFC/GPIO) module clocks is the CP clock. Fix this by adding the missing CP clock, and correcting the PFC parents. Fixes: f2afa78d5a0c0b0b ("dt-bindings: clock: Add r8a779g0 CPG Core Clock Definitions") Fixes: 36ff366033f0dde1 ("clk: renesas: r8a779g0: Add PFC/GPIO clocks") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/5401fccd204dc90b44f0013e7f53b9eff8df8214.1706197297.git.geert+renesas@glider.be
2024-02-07Merge branch '20240131-ufs-phy-clock-v3-3-58a49d2f4605@linaro.org' into ↵Bjorn Andersson
clk-for-6.9 Merge the two SC8180X reset defines through a topic branch, to allow them being picked up in the DeviceTree source tree as well.
2024-02-07Merge branch '20240125-msm8953-mdss-reset-v2-1-fd7824559426@z3ntu.xyz' into ↵Bjorn Andersson
clk-for-6.9 Merge MSM8953 GCC DeviceTree binding update through topic branch, to allow it to be merged into DeviceTree source tree as well.
2024-02-07dt-bindings: clock: google,gs101-clock: add PERIC1 clock management unitAndré Draszik
Add dt-schema documentation and clock IDs for the Connectivity Peripheral 1 (PERIC1) clock management unit. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20240201161258.1013664-3-andre.draszik@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-02-06dt-bindings: clock: qcom: Add missing UFS QREF clocksManivannan Sadhasivam
Add missing QREF clocks for UFS MEM and UFS CARD controllers. Fixes: 0fadcdfdcf57 ("dt-bindings: clock: Add SC8180x GCC binding") Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20240131-ufs-phy-clock-v3-3-58a49d2f4605@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-06dt-bindings: clock: gcc-msm8953: add more resetsVladimir Lypak
Add new defines for some more BCRs found on MSM8953. Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com> [luca: expand commit message, add more resets] Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20240125-msm8953-mdss-reset-v2-1-fd7824559426@z3ntu.xyz Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-06Merge branch ↵Bjorn Andersson
'20240202-x1e80100-clock-controllers-v4-5-7fb08c861c7c@linaro.org' into clk-for-6.9 Merge X1E clock bindings through a topic branch, to make the defines available for inclusion in DeviceTree branches as well.
2024-02-06dt-bindings: clock: qcom: Document the X1E80100 Camera Clock ControllerRajendra Nayak
Add bindings documentation for the X1E80100 Camera Clock Controller. Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-5-7fb08c861c7c@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-06dt-bindings: clock: qcom: Document the X1E80100 TCSR Clock ControllerAbel Vesa
Add bindings documentation for the X1E80100 TCSR Clock Controller. Co-developed-by: Rajendra Nayak <quic_rjendra@quicinc.com> Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-4-7fb08c861c7c@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-06dt-bindings: clock: qcom: Document the X1E80100 GPU Clock ControllerRajendra Nayak
Add bindings documentation for the X1E80100 Graphics Clock Controller. Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-3-7fb08c861c7c@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-06dt-bindings: clock: qcom: Document the X1E80100 Display Clock ControllerRajendra Nayak
Add bindings documentation for the X1E80100 Display Clock Controller. Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20240202-x1e80100-clock-controllers-v4-2-7fb08c861c7c@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-06dt-bindings: clock: mpfs: add more MSSPLL output definitionsConor Dooley
There are 3 undocumented outputs of the MSSPLL that are used for the CAN bus, "user crypto" module and eMMC. Add their clock IDs so that they can be hooked up in DT. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2024-01-31dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock DefinitionsDuy Nguyen
Add all Clock Pulse Generator Core Clock Outputs for the Renesas R-Car V4M (R8A779H0) SoC. Signed-off-by: Duy Nguyen <duy.nguyen.rh@renesas.com> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/11acbd2a30b58607474e9c32eb798b3a00e85e73.1706194617.git.geert+renesas@glider.be
2024-01-28dt-bindings: clock: qcom,gcc-sm8150: Add gcc video resets for sm8150Satya Priya Kakitapalli
Add gcc video axic, axi0 and axi1 resets for the global clock controller on sm8150. Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240111-sm8150-dfs-support-v2-2-6edb44c83d3b@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-01-23dt-bindings: clock: exynos850: Add PDMA clocksSam Protsenko
Add constants for Peripheral DMA (PDMA) clocks in CMU_CORE controller: - PDMA_ACLK: clock for PDMA0 (regular DMA) - SPDMA_ACLK: clock for PDMA1 (secure DMA) Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20240120012948.8836-2-semen.protsenko@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-01-23dt-bindings: clock: google,gs101-clock: add PERIC0 clock management unitTudor Ambarus
Add dt-schema documentation for the Connectivity Peripheral 0 (PERIC0) clock management unit. Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20240119111132.1290455-2-tudor.ambarus@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-01-12Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "Only a couple new SoCs have support added this time, primarily for Qualcomm SM8650 based on the diffstat. Otherwise this is a collection of non-critical fixes and cleanups to various clk drivers and their DT bindings. Nothing is changed in the core clk framework this time, although there's a patch to fix a basic clk type initialization function. In general, this pile looks to be on the smaller side. New Drivers: - Global, display, gpu, tcsr, and rpmh clocks on Qualcomm SM8650 - Mediatek MT7988 SoC clocks Updates: - Update Zynqmp driver for Versal NET platforms - Add clk driver for Versal clocking wizard IP - Support for stm32mp25 clks - Add glitch free PLL setting support to si5351 clk driver - Add DSI clocks on Amlogic g12/sm1 - Add CSI and ISP clocks on Amlogic g12/sm1 - Document bindings for i.MX93 ANATOP clock driver - Free clk_node in i.MX SCU driver for resource with different owner - Update the LVDS clocks to be compatible with i.MX SCU firmware 1.15 - Fix the name of the fvco in i.MX pll14xx by renaming it to fout - Add EtherNet TSN and PCIe clocks on the Renesas R-Car V4H SoC - Add interrupt controller and Ethernet clocks and resets on Renesas RZ/G3S - Check reset monitor registers on Renesas RZ/G2L-alike SoCs - Reuse reset functionality in the Renesas RZ/G2L clock driver - Global and RPMh clock support for the Qualcomm X1E80100 SoC - Support for the Stromer APCS PLL found in Qualcomm IPQ5018 - Add a new type of branch clock, with support for controlling separate memory control bits, to the Qualcomm clk driver - Use above new branch type in Qualcomm ECPRI clk driver for QDU1000 and QRU1000 - Add a number of missing clocks related to CSI2 on Qualcomm MSM8939 - Add support for the camera clock controller on Qualcomm SC8280XP - Correct PLL configuration in GPU and video clock controllers for Qualcomm SM8150 - Add runtime PM support and a few missing resets to Qualcomm SM8150 video clock controller - Fix configuration of various GCC GDSCs on Qualcomm SM8550 - Mark shared RCGs appropriately in the Qualcomm SM8550 GCC driver - Fix up GPU and display clock controllers PLL configuration settings on Qualcomm SM8550 - Cleanup variable init in Allwinner nkm module - Convert various DT bindings to YAML - A few kernel-doc fixes for Samsung SoC clock controllers" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (93 commits) clk: mediatek: add drivers for MT7988 SoC clk: mediatek: add pcw_chg_bit control for PLLs of MT7988 dt-bindings: clock: mediatek: add clock controllers of MT7988 dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs dt-bindings: clock: mediatek: add MT7988 clock IDs clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes clk: mediatek: clk-mux: Support custom parent indices for muxes dt-bindings: clock: sophgo: Add clock controller of CV1800 series SoC clk: starfive: jh7100: Add CLK_SET_RATE_PARENT to gmac_tx clk: starfive: Add flags argument to JH71X0__MUX macro clk: imx: pll14xx: change naming of fvco to fout clk: imx: clk-imx8qxp: fix LVDS bypass, pixel and phy clocks clk: imx: scu: Fix memory leak in __imx_clk_gpr_scu() clk: fixed-rate: fix clk_hw_register_fixed_rate_with_accuracy_parent_hw clk: qcom: dispcc-sm8650: Add test_ctl parameters to PLL config clk: qcom: gpucc-sm8650: Add test_ctl parameters to PLL config clk: qcom: dispcc-sm8550: Use the correct PLL configuration function clk: qcom: dispcc-sm8550: Update disp PLL settings clk: qcom: gpucc-sm8550: Update GPU PLL settings ...
2024-01-11Merge tag 'soc-drivers-6.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "A new drivers/cache/ subsystem is added to contain drivers for abstracting cache flush methods on riscv and potentially others, as this is needed for handling non-coherent DMA but several SoCs require nonstandard hardware methods for it. op-tee gains support for asynchronous notification with FF-A, as well as support for a system thread for executing in secure world. The tee, reset, bus, memory and scmi subsystems have a couple of minor updates. Platform specific soc driver changes include: - Samsung Exynos gains driver support for Google GS101 (Tensor G1) across multiple subsystems - Qualcomm Snapdragon gains support for SM8650 and X1E along with added features for some other SoCs - Mediatek adds support for "Smart Voltage Scaling" on MT8186 and MT8195, and driver support for MT8188 along with some code refactoring. - Microchip Polarfire FPGA support for "Auto Update" of the FPGA bitstream - Apple M1 mailbox driver is rewritten into a SoC driver - minor updates on amlogic, mvebu, ti, zynq, imx, renesas and hisilicon" * tag 'soc-drivers-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits) memory: ti-emif-pm: Convert to platform remove callback returning void memory: ti-aemif: Convert to platform remove callback returning void memory: tegra210-emc: Convert to platform remove callback returning void memory: tegra186-emc: Convert to platform remove callback returning void memory: stm32-fmc2-ebi: Convert to platform remove callback returning void memory: exynos5422-dmc: Convert to platform remove callback returning void memory: renesas-rpc-if: Convert to platform remove callback returning void memory: omap-gpmc: Convert to platform remove callback returning void memory: mtk-smi: Convert to platform remove callback returning void memory: jz4780-nemc: Convert to platform remove callback returning void memory: fsl_ifc: Convert to platform remove callback returning void memory: fsl-corenet-cf: Convert to platform remove callback returning void memory: emif: Convert to platform remove callback returning void memory: brcmstb_memc: Convert to platform remove callback returning void memory: brcmstb_dpfe: Convert to platform remove callback returning void soc: qcom: llcc: Fix LLCC_TRP_ATTR2_CFGn offset firmware: qcom: qseecom: fix memory leaks in error paths dt-bindings: clock: google,gs101: rename CMU_TOP gate defines soc: qcom: llcc: Fix typo in kernel-doc dt-bindings: soc: qcom,aoss-qmp: document the X1E80100 Always-On Subsystem side channel ...
2024-01-09Merge branches 'clk-zynq', 'clk-xilinx' and 'clk-stm' into clk-nextStephen Boyd
- Update Zynqmp driver for Versal NET platforms - Add clk driver for Versal clocking wizard IP * clk-zynq: drivers: clk: zynqmp: update divider round rate logic drivers: clk: zynqmp: calculate closest mux rate * clk-xilinx: clocking-wizard: Add support for versal clocking wizard dt-bindings: clock: xilinx: add versal compatible * clk-stm: dt-bindings: stm32: add clocks and reset binding for stm32mp25 platform clk: stm32mp1: use stm32mp13 reset driver clk: stm32mp1: move stm32mp1 clock driver into stm32 directory
2024-01-09Merge branches 'clk-imx', 'clk-qcom', 'clk-amlogic' and 'clk-mediatek' into ↵Stephen Boyd
clk-next * clk-imx: clk: imx: pll14xx: change naming of fvco to fout clk: imx: clk-imx8qxp: fix LVDS bypass, pixel and phy clocks clk: imx: scu: Fix memory leak in __imx_clk_gpr_scu() dt-bindings: clock: support i.MX93 ANATOP clock module * clk-qcom: (41 commits) clk: qcom: dispcc-sm8650: Add test_ctl parameters to PLL config clk: qcom: gpucc-sm8650: Add test_ctl parameters to PLL config clk: qcom: dispcc-sm8550: Use the correct PLL configuration function clk: qcom: dispcc-sm8550: Update disp PLL settings clk: qcom: gpucc-sm8550: Update GPU PLL settings clk: qcom: gcc-sm8550: Mark RCGs shared where applicable clk: qcom: gcc-sm8550: use collapse-voting for PCIe GDSCs clk: qcom: gcc-sm8550: Mark the PCIe GDSCs votable clk: qcom: gcc-sm8550: Add the missing RETAIN_FF_ENABLE GDSC flag clk: qcom: camcc-sc8280xp: Prevent error pointer dereference clk: qcom: videocc-sm8150: Add runtime PM support clk: qcom: videocc-sm8150: Add missing PLL config property clk: qcom: videocc-sm8150: Update the videocc resets dt-bindings: clock: Update the videocc resets for sm8150 clk: qcom: rpmh: Add support for X1E80100 rpmh clocks clk: qcom: Add Global Clock controller (GCC) driver for X1E80100 dt-bindings: clock: qcom-rpmhcc: Add RPMHCC bindings for X1E80100 dt-bindings: clock: qcom: Add X1E80100 GCC clocks clk: qcom: Add ECPRICC driver support for QDU1000 and QRU1000 clk: qcom: branch: Add mem ops support for branch2 clocks ... * clk-amlogic: clk: meson: g12a: add CSI & ISP gates clocks clk: meson: g12a: add MIPI ISP clocks dt-bindings: clock: g12a-clkc: add MIPI ISP & CSI PHY clock ids clk: meson: g12a: add CTS_ENCL & CTS_ENCL_SEL clocks dt-bindings: clk: g12a-clkc: add CTS_ENCL clock ids * clk-mediatek: clk: mediatek: add drivers for MT7988 SoC clk: mediatek: add pcw_chg_bit control for PLLs of MT7988 dt-bindings: clock: mediatek: add clock controllers of MT7988 dt-bindings: reset: mediatek: add MT7988 ethwarp reset IDs dt-bindings: clock: mediatek: add MT7988 clock IDs clk: mediatek: mt8188-topckgen: Refactor parents for top_dp/edp muxes clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes clk: mediatek: clk-mux: Support custom parent indices for muxes dt-bindings: clock: brcm,kona-ccu: convert to YAML dt-bindings: arm: mediatek: move ethsys controller & convert to DT schema dt-bindings: Remove alt_ref from versal
2024-01-03dt-bindings: clock: mediatek: add MT7988 clock IDsSam Shih
Add MT7988 clock dt-bindings for topckgen, apmixedsys, infracfg, ethernet and xfipll subsystem clocks. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/27f99db432e9ccc804cc5b6501d7d17d72cae879.1702849494.git.daniel@makrotopia.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-01-03dt-bindings: clock: sophgo: Add clock controller of CV1800 series SoCInochi Amaoto
Add definition for the clock controller of the CV1800 series SoC. For CV181X, it has a clock that CV180X does not have. To avoid misuse, also add a compatible string to identify CV181X series SoC. Signed-off-by: Inochi Amaoto <inochiama@outlook.com> Link: https://github.com/milkv-duo/duo-files/blob/main/hardware/CV1800B/CV1800B-CV1801B-Preliminary-Datasheet-full-en.pdf Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/IA1PR20MB49535E448097F6FFC1218C39BB90A@IA1PR20MB4953.namprd20.prod.outlook.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-12-22Merge tag 'qcom-arm64-for-6.8' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm ARM64 updates for v6.8 Support is added for the new Snapdragon 8 Gen 3 mobile platform, with support for the MTP and QRD development devices, the new Snapdragon X Elite compute platform with QCP and CRD development/references devices, the QCS6590/QCM6490 platform with support for the IDP development device and the Robotics RB3gen2 board, the Huawei Honor 5X/GR5 handset built on MSM8939, and Xiaomi Pad 6 on SM8250. On IPQ5018 and IPQ6018 platform support for CPUfreq, USB, and one additional QUP SPI controller is added. CPU OPP tables are selectively enabled based on fuses, for both IPQ5332 and IPQ6018. IPQ6018 gains description of a few more SPI and UART nodes. Common elements of the IPQ9574 RDP boards are refactored into a common include file. IPQ9574 also gains description of its LEDs and WPS busttons. MSM8916 finally gets the DSP-based audio described, and this is enabled for a variety of boards. Acer Iconia Talk S and Loncheer L8910 gains notification LED, battery and charger support is added to Loncheer L8150, and GPU is enabled for Samsung Galaxy Tab A. Similariy DSP-based audio is added on MSM8939, the BAM-DMUX support is enabled as well. The Longcheer L9100 gains RGB notification LED support, and the wireless subsystem is enabled. Missing SPI controllers are described on MSM8953. On MSM8996 the MPM is enabled, to allow using wakeup interrupts. Interconnect providers, MPM and display are added to QCM2290. UFS, remoteprocs and WiFi is enabled for Fairphone FP5. On Fairphone FP3 audio, WiFi and Bluetooth are enabled. On the Robotics RB1, HDMI and the CAN bus controller are added. On Robotics RB2 Bluetooth, the modem remoteproc and WiFi are enabled. Bluetooth is enabled on the Robotics RB5. On SA8775P tsens and thermal is added, as well as the random number generator. Sound and RTC support is added for the Acer Aspire 1. On SC7280 DeviceTree is refactored, in order to allow non-Chrome devices to inherit the base dtsi. Support for UFS, crypto, TrustZone based remoteprocs, the Camera Control Interface (CCI) and random number generator support are added. Additionally a variety of smaller fixes are introduced. A variety of fixes are introduced for SC8180X, in particular missing power-domains and interconnects. On SC8280XP the camera clock controller is added, and a number of smaller fixes are introduced. The display subsystem in SDM670 is described. On SDX75 interconnect providers are added, as is USB3 and the related PHY, which is then enabled on the IDP device. On SM6115 interconnect providers are added and existing clients are wired up. A UART controller is added as well. The MPM is added, to provide wakeup interrutps, on SM6375. The modem subsystem, and WiFi are enabled on Sony Xperia 10 IV, a few regulator supplies are corrected. On SM8150 the DisplayPort controller is added, for USB Type-C output, which together with the addition of HDMI is described on the HDK board. GPU and random number generator support are added to SM8450, and enabled on the HDK board. On SM8550 GPU, IPA, random number generator, missing SoundWire ports are added, and enabled on both MTP and QRD devices. Additionally a large number of smaller functional and DeviceTree binding validation issues are corrected across a variety of platforms. * tag 'qcom-arm64-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (288 commits) arm64: dts: qcom: sc8180x-primus: Allow UFS regulators load/mode setting arm64: dts: qcom: sc8180x: Describe the GIC redistributor arm64: dts: qcom: sc8180x: Add interconnects to UFS arm64: dts: qcom: sc8180x: Add missing MDP clocks arm64: dts: qcom: sc8180x: Add UFS GDSC arm64: dts: qcom: sc7280*: move MPSS and WPSS memory to dtsi arm64: dts: qcom: sc7280: Rename reserved-memory nodes arm64: dts: qcom: sc7280: Remove unused second MPSS reg arm64: dts: qcom: sdm670: add display subsystem arm64: dts: qcom: sm8150-hdk: enable DisplayPort and USB-C altmode arm64: dts: qcom: sm8150: add USB-C ports to the OTG USB host arm64: dts: qcom: sm8150: add USB-C ports to the USB+DP QMP PHY arm64: dts: qcom: sm8150: add DisplayPort controller arm64: dts: qcom: sm8150-hdk: fix SS USB regulators arm64: dts: qcom: sm8150-hdk: enable HDMI output arm64: dts: qcom: sm8150: make dispcc cast minimal vote on MMCX arm64: dts: qcom: sm8650: add fastrpc-compute-cb nodes arm64: dts: qcom: sm8550-qrd: add PM8010 regulators arm64: dts: qcom: sm8550-mtp: Add pm8010 regulators arm64: dts: qcom: qcm2290: Hook up MPM ... Link: https://lore.kernel.org/r/20231219145402.874161-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-12-18dt-bindings: clock: google,gs101: rename CMU_TOP gate definesTudor Ambarus
The gs101 clock defines from the bindings header are derived from the clock register names found in the datasheet under some certain rules. The CMU TOP gate clock defines missed to include the required "CMU" differentiator which will cause collisions with the gate clock defines of other clock units. Rename the TOP gate clock defines to include "CMU". Update the clock driver to use the new defines in order to not break compilation and bisect-ability. There are no device trees that use the previous defines. Fixes: 0a910f160638 ("dt-bindings: clock: Add Google gs101 clock management unit bindings") Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Peter Griffin <peter.griffin@linaro.org> Link: https://lore.kernel.org/r/20231218064333.479885-1-tudor.ambarus@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-12-17dt-bindings: stm32: add clocks and reset binding for stm32mp25 platformGabriel Fernandez
Adds clock and reset binding entries for STM32MP25 SoC family Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231208143700.354785-4-gabriel.fernandez@foss.st.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-12-15Merge branch '20231201-videocc-8150-v3-1-56bec3a5e443@quicinc.com' into ↵Bjorn Andersson
clk-for-6.8 Merge SM8150 Video clock controller through a topic branch, to allow constants to be made available in the DeviceTree branch as well.
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-30 16:43:47 +0000