| Age | Commit message (Collapse) | Author |
|---|
|
Extract the scu irq get status code from imx_scu_irq_work_handler and
make into a new function imx_scu_irq_get_status which could be used
by others, such as SECO.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Per checkpatch.pl, "ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP"
So use EOPNOTSUPP to replace ENOTSUPP.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
add dummy functions to avoid build failure when header files
are included, but drivers are not built.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The i.MX SCU soc driver depends on SCU firmware driver, so it has to
use platform driver model for proper defer probe operation, since
it has no device binding in DT file, a simple platform device is
created together inside the platform driver. To make it more clean,
we can just move the entire SCU soc driver into imx firmware folder
and initialized by i.MX SCU firmware driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add resource management API, when we have multiple
partition running together, resources not owned to current
partition should not be used.
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
i.MX8 SoCs DTS file needs system control macro definitions, so move them
into dt-binding headfile, then include/linux/firmware/imx/types.h can be
removed and those drivers using it should be changed accordingly.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The System Controller Firmware (SCFW) controls RTC, thermal
and WDOG etc., these resources' interrupt function are managed
by SCU. When any IRQ pending, SCU will notify Linux via MU general
interrupt channel #3, and Linux kernel needs to call SCU APIs
to get IRQ status and notify each module to handle the interrupt.
Since there is no data transmission for SCU IRQ notification, so
doorbell mode is used for this MU channel, and SCU driver will
use notifier mechanism to broadcast to every module which registers
the SCU block notifier.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add SCU PM SVC related protocol definitions which will be used by
a number of PM functions like Power Domain, Clock, Reset and etc.
The detailed implementation of each function will put in the individual
function drivers.
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add SCU MISC SVC support which provides misc control get/set functions.
Cc: Shawn Guo <shawnguo@kernel.org>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The System Controller Firmware (SCFW) is a low-level system function
which runs on a dedicated Cortex-M core to provide power, clock, and
resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
(QM, QP), and i.MX8QX (QXP, DX).
This patch implements the SCU firmware IPC function and the common
message sending API sc_call_rpc.
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
