| Age | Commit message (Collapse) | Author |
|---|
|
SCTP is not universally deployed, allow hiding its bit
from the skb.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Datacenter kernel builds will very likely not include WIRELESS,
so let them shave 2 bits off the skb by hiding the wifi fields.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are some use-cases where it is desirable to use bpf_redirect()
in combination with ifb device, which currently is not supported, for
example, around filtering inbound traffic with BPF to then push it to
ifb which holds the qdisc for shaping in contrast to doing that on the
egress device.
Toke mentions the following case related to OpenWrt:
Because there's not always a single egress on the other side. These are
mainly home routers, which tend to have one or more WiFi devices bridged
to one or more ethernet ports on the LAN side, and a single upstream WAN
port. And the objective is to control the total amount of traffic going
over the WAN link (in both directions), to deal with bufferbloat in the
ISP network (which is sadly still all too prevalent).
In this setup, the traffic can be split arbitrarily between the links
on the LAN side, and the only "single bottleneck" is the WAN link. So we
install both egress and ingress shapers on this, configured to something
like 95-98% of the true link bandwidth, thus moving the queues into the
qdisc layer in the router. It's usually necessary to set the ingress
bandwidth shaper a bit lower than the egress due to being "downstream"
of the bottleneck link, but it does work surprisingly well.
We usually use something like a matchall filter to put all ingress
traffic on the ifb, so doing the redirect from BPF has not been an
immediate requirement thus far. However, it does seem a bit odd that
this is not possible, and we do have a BPF-based filter that layers on
top of this kind of setup, which currently uses u32 as the ingress
filter and so it could presumably be improved to use BPF instead if
that was available.
Reported-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reported-by: Yafang Shao <laoar.shao@gmail.com>
Reported-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://git.openwrt.org/?p=project/qosify.git;a=blob;f=README
Link: https://lore.kernel.org/bpf/875y9yzbuy.fsf@toke.dk
Link: https://lore.kernel.org/r/8cebc8b2b6e967e10cbafe2ffd6795050e74accd.1681739137.git.daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
nftables can be built as a module, so fix the preprocessor conditional
accordingly.
Fixes: 478b360a47b7 ("netfilter: nf_tables: fix nf_trace always-on with XT_TRACE=n")
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Recent patches to mlx5 mentioned a regression when moving from
driver local page pool to only using the generic page pool code.
Page pool has two recycling paths (1) direct one, which runs in
safe NAPI context (basically consumer context, so producing
can be lockless); and (2) via a ptr_ring, which takes a spin
lock because the freeing can happen from any CPU; producer
and consumer may run concurrently.
Since the page pool code was added, Eric introduced a revised version
of deferred skb freeing. TCP skbs are now usually returned to the CPU
which allocated them, and freed in softirq context. This places the
freeing (producing of pages back to the pool) enticingly close to
the allocation (consumer).
If we can prove that we're freeing in the same softirq context in which
the consumer NAPI will run - lockless use of the cache is perfectly fine,
no need for the lock.
Let drivers link the page pool to a NAPI instance. If the NAPI instance
is scheduled on the same CPU on which we're freeing - place the pages
in the direct cache.
With that and patched bnxt (XDP enabled to engage the page pool, sigh,
bnxt really needs page pool work :() I see a 2.6% perf boost with
a TCP stream test (app on a different physical core than softirq).
The CPU use of relevant functions decreases as expected:
page_pool_refill_alloc_cache 1.17% -> 0%
_raw_spin_lock 2.41% -> 0.98%
Only consider lockless path to be safe when NAPI is scheduled
- in practice this should cover majority if not all of steady state
workloads. It's usually the NAPI kicking in that causes the skb flush.
The main case we'll miss out on is when application runs on the same
CPU as NAPI. In that case we don't use the deferred skb free path.
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
====================
pull-request: bpf-next 2023-04-13
We've added 260 non-merge commits during the last 36 day(s) which contain
a total of 356 files changed, 21786 insertions(+), 11275 deletions(-).
The main changes are:
1) Rework BPF verifier log behavior and implement it as a rotating log
by default with the option to retain old-style fixed log behavior,
from Andrii Nakryiko.
2) Adds support for using {FOU,GUE} encap with an ipip device operating
in collect_md mode and add a set of BPF kfuncs for controlling encap
params, from Christian Ehrig.
3) Allow BPF programs to detect at load time whether a particular kfunc
exists or not, and also add support for this in light skeleton,
from Alexei Starovoitov.
4) Optimize hashmap lookups when key size is multiple of 4,
from Anton Protopopov.
5) Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps, from David Vernet.
6) Add support for stashing local BPF kptr into a map value via
bpf_kptr_xchg(). This is useful e.g. for rbtree node creation
for new cgroups, from Dave Marchevsky.
7) Fix BTF handling of is_int_ptr to skip modifiers to work around
tracing issues where a program cannot be attached, from Feng Zhou.
8) Migrate a big portion of test_verifier unit tests over to
test_progs -a verifier_* via inline asm to ease {read,debug}ability,
from Eduard Zingerman.
9) Several updates to the instruction-set.rst documentation
which is subject to future IETF standardization
(https://lwn.net/Articles/926882/), from Dave Thaler.
10) Fix BPF verifier in the __reg_bound_offset's 64->32 tnum sub-register
known bits information propagation, from Daniel Borkmann.
11) Add skb bitfield compaction work related to BPF with the overall goal
to make more of the sk_buff bits optional, from Jakub Kicinski.
12) BPF selftest cleanups for build id extraction which stand on its own
from the upcoming integration work of build id into struct file object,
from Jiri Olsa.
13) Add fixes and optimizations for xsk descriptor validation and several
selftest improvements for xsk sockets, from Kal Conley.
14) Add BPF links for struct_ops and enable switching implementations
of BPF TCP cong-ctls under a given name by replacing backing
struct_ops map, from Kui-Feng Lee.
15) Remove a misleading BPF verifier env->bypass_spec_v1 check on variable
offset stack read as earlier Spectre checks cover this,
from Luis Gerhorst.
16) Fix issues in copy_from_user_nofault() for BPF and other tracers
to resemble copy_from_user_nmi() from safety PoV, from Florian Lehner
and Alexei Starovoitov.
17) Add --json-summary option to test_progs in order for CI tooling to
ease parsing of test results, from Manu Bretelle.
18) Batch of improvements and refactoring to prep for upcoming
bpf_local_storage conversion to bpf_mem_cache_{alloc,free} allocator,
from Martin KaFai Lau.
19) Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations,
from Quentin Monnet.
20) Fix attaching fentry/fexit/fmod_ret/lsm to modules by extracting
the module name from BTF of the target and searching kallsyms of
the correct module, from Viktor Malik.
21) Improve BPF verifier handling of '<const> <cond> <non_const>'
to better detect whether in particular jmp32 branches are taken,
from Yonghong Song.
22) Allow BPF TCP cong-ctls to write app_limited of struct tcp_sock.
A built-in cc or one from a kernel module is already able to write
to app_limited, from Yixin Shen.
Conflicts:
Documentation/bpf/bpf_devel_QA.rst
b7abcd9c656b ("bpf, doc: Link to submitting-patches.rst for general patch submission info")
0f10f647f455 ("bpf, docs: Use internal linking for link to netdev subsystem doc")
https://lore.kernel.org/all/20230307095812.236eb1be@canb.auug.org.au/
include/net/ip_tunnels.h
bc9d003dc48c3 ("ip_tunnel: Preserve pointer const in ip_tunnel_info_opts")
ac931d4cdec3d ("ipip,ip_tunnel,sit: Add FOU support for externally controlled ipip devices")
https://lore.kernel.org/all/20230413161235.4093777-1-broonie@kernel.org/
net/bpf/test_run.c
e5995bc7e2ba ("bpf, test_run: fix crashes due to XDP frame overwriting/corruption")
294635a8165a ("bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES")
https://lore.kernel.org/all/20230320102619.05b80a98@canb.auug.org.au/
====================
Link: https://lore.kernel.org/r/20230413191525.7295-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Recent attempt to ensure PREROUTING hook is executed again when a
decrypted ipsec packet received on a bridge passes through the network
stack a second time broke the physdev match in INPUT hook.
We can't discard the nf_bridge info strct from sabotage_in hook, as
this is needed by the physdev match.
Keep the struct around and handle this with another conditional instead.
Fixes: 2b272bb558f1 ("netfilter: br_netfilter: disable sabotage_in hook after first suppression")
Reported-and-tested-by: Farid BENAMROUCHE <fariouche@yahoo.fr>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Currently, MAX_SKB_FRAGS value is 17.
For standard tcp sendmsg() traffic, no big deal because tcp_sendmsg()
attempts order-3 allocations, stuffing 32768 bytes per frag.
But with zero copy, we use order-0 pages.
For BIG TCP to show its full potential, we add a config option
to be able to fit up to 45 segments per skb.
This is also needed for BIG TCP rx zerocopy, as zerocopy currently
does not support skbs with frag list.
We have used MAX_SKB_FRAGS=45 value for years at Google before
we deployed 4K MTU, with no adverse effect, other than
a recent issue in mlx4, fixed in commit 26782aad00cc
("net/mlx4: MLX4_TX_BOUNCE_BUFFER_SIZE depends on MAX_SKB_FRAGS")
Back then, goal was to be able to receive full size (64KB) GRO
packets without the frag_list overhead.
Note that /proc/sys/net/core/max_skb_frags can also be used to limit
the number of fragments TCP can use in tx packets.
By default we keep the old/legacy value of 17 until we get
more coverage for the updated values.
Sizes of struct skb_shared_info on 64bit arches
MAX_SKB_FRAGS | sizeof(struct skb_shared_info):
==============================================
17 320
21 320+64 = 384
25 320+128 = 448
29 320+192 = 512
33 320+256 = 576
37 320+320 = 640
41 320+384 = 704
45 320+448 = 768
This inflation might cause problems for drivers assuming they could pack
both the incoming packet (for MTU=1500) and skb_shared_info in half a page,
using build_skb().
v3: fix build error when CONFIG_NET=n
v2: fix two build errors assuming MAX_SKB_FRAGS was "unsigned long"
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20230323162842.1935061-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To avoid more possible BPF dependencies with moving bitfields
around keep the fields BPF cares about right next to the offset
marker.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230321014115.997841-4-kuba@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
BPF needs to know the offsets of fields it tries to access.
Zero-length fields are added to make offsetof() work.
This unfortunately partitions the bitfield (fields across
the zero-length members can't be coalesced).
Reorder bytes 2 and 3, BPF needs to know the offset of fields
previously in byte 3 and some fields in byte 2 should really
be optional.
The two bytes are always in the same cacheline so it should
not matter.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230321014115.997841-3-kuba@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
vlan_present is gone since
commit 354259fa73e2 ("net: remove skb->vlan_present")
rename the offset field to what BPF is currently looking
for in this byte - mono_delivery_time and tc_at_ingress.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230321014115.997841-2-kuba@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
skb_mark_for_recycle() is guarded with CONFIG_PAGE_POOL, this creates
unneeded complication when using it in the generic code. For now, it's
only used in the drivers always selecting Page Pool, so this works.
Move the guards so that preprocessor will cut out only the operation
itself and the function will still be a noop on !PAGE_POOL systems,
but available there as well.
No functional changes.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202303020342.Wi2PRFFH-lkp@intel.com
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20230313215553.1045175-3-aleksander.lobakin@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Commit 0091bfc81741 ("io_uring/af_unix: defer registered
files gc to io_uring release") added one bit to struct sk_buff.
This structure is critical for networking, and we try very hard
to not add bloat on it, unless absolutely required.
For instance, we can use a specific destructor as a wrapper
around unix_destruct_scm(), to identify skbs that unix_gc()
has to special case.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For drivers to support partial offload of a filter's action list,
add support for action miss to specify an action instance to
continue from in sw.
CT action in particular can't be fully offloaded, as new connections
need to be handled in software. This imposes other limitations on
the actions that can be offloaded together with the CT action, such
as packet modifications.
Assign each action on a filter's action list a unique miss_cookie
which drivers can then use to fill action_miss part of the tc skb
extension. On getting back this miss_cookie, find the action
instance with relevant cookie and continue classifying from there.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pskb_may_pull() can fail for two different reasons.
Provide pskb_may_pull_reason() helper to distinguish
between these reasons.
It returns:
SKB_NOT_DROPPED_YET : Success
SKB_DROP_REASON_PKT_TOO_SMALL : packet too small
SKB_DROP_REASON_NOMEM : skb->head could not be resized
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
skbuff_head_cache is misnamed (perhaps for historical reasons?)
because it does not hold heads. Head is the buffer which skb->data
points to, and also where shinfo lives. struct sk_buff is a metadata
structure, not the head.
Eric recently added skb_small_head_cache (which allocates actual
head buffers), let that serve as an excuse to finally clean this up :)
Leave the user-space visible name intact, it could possibly be uAPI.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We have many places using this expression:
SKB_DATA_ALIGN(sizeof(struct skb_shared_info))
Use of SKB_HEAD_ALIGN() will allow to clean them.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
First user of skb_poison_list is in kfree_skb_list_reason, to catch bugs
earlier like introduced in commit eedade12f4cb ("net: kfree_skb_list use
kmem_cache_free_bulk"). For completeness mentioned bug have been fixed in
commit f72ff8b81ebc ("net: fix kfree_skb_list use of skb_mark_not_on_list").
In case of a bug like mentioned commit we would have seen OOPS with:
general protection fault, probably for non-canonical address 0xdead000000000870
And content of one the registers e.g. R13: dead000000000800
In this case skb->len is at offset 112 bytes (0x70) why fault happens at
0x800+0x70 = 0x870
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
linux/hrtimer.h include was added because apparently it used
to contain ktime related code. This is no longer the case
and we include linux/time.h explicitly.
Sadly this change is currently a noop because linux/dma-mapping.h
and net/page_pool.h pull in half of the universe.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
splice.h is included since commit a60e3cc7c929 ("net: make
skb_splice_bits more configureable") but really even then
all we needed is some forward declarations. Most of that
code is now gone, and remaining has fwd declarations.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
linux/sched.h was added for skb_mstamp_* (all the way back
before linux/sched.h got split and linux/sched/clock.h created).
We don't need it in skbuff.h any more.
Sadly this change is currently a noop because linux/dma-mapping.h
and net/page_pool.h pull in half of the universe.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It used to be necessary for skb_mstamp_* static inlines,
but those are gone since we moved to usec timestamps in
TCP, in 2017.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This include was added for skb_find_text() but all we need there
is a forward declaration of struct ts_config.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It appears nothing needs it. The kernel builds fine with this
include removed, building an otherwise empty source file with:
#include <linux/skbuff.h>
#ifdef _LINUX_NET_H
#error linux/net.h is back
#endif
works too (meaning net.h is not just pulled in indirectly).
This gives us a slight 0.5% reduction in the pre-processed size
of skbuff.h.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzkaller reported:
BUG: KASAN: slab-out-of-bounds in __build_skb_around+0x235/0x340 net/core/skbuff.c:294
Write of size 32 at addr ffff88802aa172c0 by task syz-executor413/5295
For bpf_prog_test_run_skb(), which uses a kmalloc()ed buffer passed to
build_skb().
When build_skb() is passed a frag_size of 0, it means the buffer came
from kmalloc. In these cases, ksize() is used to find its actual size,
but since the allocation may not have been made to that size, actually
perform the krealloc() call so that all the associated buffer size
checking will be correctly notified (and use the "new" pointer so that
compiler hinting works correctly). Split this logic out into a new
interface, slab_build_skb(), but leave the original 0 checking for now
to catch any stragglers.
Reported-by: syzbot+fda18eaa8c12534ccb3b@syzkaller.appspotmail.com
Link: https://groups.google.com/g/syzkaller-bugs/c/UnIKxTtU5-0/m/-wbXinkgAQAJ
Fixes: 38931d8989b5 ("mm: Make ksize() a reporting-only function")
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: pepsipu <soopthegoop@gmail.com>
Cc: syzbot+fda18eaa8c12534ccb3b@syzkaller.appspotmail.com
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: kasan-dev <kasan-dev@googlegroups.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: ast@kernel.org
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Hao Luo <haoluo@google.com>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: jolsa@kernel.org
Cc: KP Singh <kpsingh@kernel.org>
Cc: martin.lau@linux.dev
Cc: Stanislav Fomichev <sdf@google.com>
Cc: song@kernel.org
Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221208060256.give.994-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
skb->vlan_present seems redundant.
We can instead derive it from this boolean expression:
vlan_present = skb->vlan_proto != 0 || skb->vlan_tci != 0
Add a new union, to access both fields in a single load/store
when possible.
union {
u32 vlan_all;
struct {
__be16 vlan_proto;
__u16 vlan_tci;
};
};
This allows following patch to remove a conditional test in GRO stack.
Note:
We move remcsum_offload to keep TC_AT_INGRESS_MASK
and SKB_MONO_DELIVERY_TIME_MASK unchanged.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
skb_pp_recycle() is only used by skb_free_head() in
skbuff.c, so move it to skbuff.c.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of putting io_uring's registered files in unix_gc() we want it
to be done by io_uring itself. The trick here is to consider io_uring
registered files for cycle detection but not actually putting them down.
Because io_uring can't register other ring instances, this will remove
all refs to the ring file triggering the ->release path and clean up
with io_ring_ctx_free().
Cc: stable@vger.kernel.org
Fixes: 6b06314c47e1 ("io_uring: add file set registration")
Reported-and-tested-by: David Bouman <dbouman03@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
[axboe: add kerneldoc comment to skb, fold in skb leak fix]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
pskb_may_pull already contains all of the checks performed by
pskb_pull.
Use pskb_may_pull for validation in pskb_pull, eliminating the
duplication and making __pskb_pull obsolete.
Replace __pskb_pull with pskb_pull where applicable.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We can benefit from a smaller struct ubuf_info, so leave only mandatory
fields and let users to decide how they want to extend it. Convert
MSG_ZEROCOPY to struct ubuf_info_msgzc and remove duplicated fields.
This reduces the size from 48 bytes to just 16.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're going to split struct ubuf_info and leave there only
mandatory fields. Users are free to extend it. Add struct
ubuf_info_msgzc, which will be an extended version for MSG_ZEROCOPY and
some other users. It duplicates of struct ubuf_info for now and will be
removed in a couple of patches.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
drivers/net/ethernet/freescale/fec.h
7d650df99d52 ("net: fec: add pm_qos support on imx6q platform")
40c79ce13b03 ("net: fec: add stop mode support for imx8 platform")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-09-05
The following pull-request contains BPF updates for your *net-next* tree.
We've added 106 non-merge commits during the last 18 day(s) which contain
a total of 159 files changed, 5225 insertions(+), 1358 deletions(-).
There are two small merge conflicts, resolve them as follows:
1) tools/testing/selftests/bpf/DENYLIST.s390x
Commit 27e23836ce22 ("selftests/bpf: Add lru_bug to s390x deny list") in
bpf tree was needed to get BPF CI green on s390x, but it conflicted with
newly added tests on bpf-next. Resolve by adding both hunks, result:
[...]
lru_bug # prog 'printk': failed to auto-attach: -524
setget_sockopt # attach unexpected error: -524 (trampoline)
cb_refs # expected error message unexpected error: -524 (trampoline)
cgroup_hierarchical_stats # JIT does not support calling kernel function (kfunc)
htab_update # failed to attach: ERROR: strerror_r(-524)=22 (trampoline)
[...]
2) net/core/filter.c
Commit 1227c1771dd2 ("net: Fix data-races around sysctl_[rw]mem_(max|default).")
from net tree conflicts with commit 29003875bd5b ("bpf: Change bpf_setsockopt(SOL_SOCKET)
to reuse sk_setsockopt()") from bpf-next tree. Take the code as it is from
bpf-next tree, result:
[...]
if (getopt) {
if (optname == SO_BINDTODEVICE)
return -EINVAL;
return sk_getsockopt(sk, SOL_SOCKET, optname,
KERNEL_SOCKPTR(optval),
KERNEL_SOCKPTR(optlen));
}
return sk_setsockopt(sk, SOL_SOCKET, optname,
KERNEL_SOCKPTR(optval), *optlen);
[...]
The main changes are:
1) Add any-context BPF specific memory allocator which is useful in particular for BPF
tracing with bonus of performance equal to full prealloc, from Alexei Starovoitov.
2) Big batch to remove duplicated code from bpf_{get,set}sockopt() helpers as an effort
to reuse the existing core socket code as much as possible, from Martin KaFai Lau.
3) Extend BPF flow dissector for BPF programs to just augment the in-kernel dissector
with custom logic. In other words, allow for partial replacement, from Shmulik Ladkani.
4) Add a new cgroup iterator to BPF with different traversal options, from Hao Luo.
5) Support for BPF to collect hierarchical cgroup statistics efficiently through BPF
integration with the rstat framework, from Yosry Ahmed.
6) Support bpf_{g,s}et_retval() under more BPF cgroup hooks, from Stanislav Fomichev.
7) BPF hash table and local storages fixes under fully preemptible kernel, from Hou Tao.
8) Add various improvements to BPF selftests and libbpf for compilation with gcc BPF
backend, from James Hilliard.
9) Fix verifier helper permissions and reference state management for synchronous
callbacks, from Kumar Kartikeya Dwivedi.
10) Add support for BPF selftest's xskxceiver to also be used against real devices that
support MAC loopback, from Maciej Fijalkowski.
11) Various fixes to the bpf-helpers(7) man page generation script, from Quentin Monnet.
12) Document BPF verifier's tnum_in(tnum_range(), ...) gotchas, from Shung-Hsi Yu.
13) Various minor misc improvements all over the place.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (106 commits)
bpf: Optimize rcu_barrier usage between hash map and bpf_mem_alloc.
bpf: Remove usage of kmem_cache from bpf_mem_cache.
bpf: Remove prealloc-only restriction for sleepable bpf programs.
bpf: Prepare bpf_mem_alloc to be used by sleepable bpf programs.
bpf: Remove tracing program restriction on map types
bpf: Convert percpu hash map to per-cpu bpf_mem_alloc.
bpf: Add percpu allocation support to bpf_mem_alloc.
bpf: Batch call_rcu callbacks instead of SLAB_TYPESAFE_BY_RCU.
bpf: Adjust low/high watermarks in bpf_mem_cache
bpf: Optimize call_rcu in non-preallocated hash map.
bpf: Optimize element count in non-preallocated hash map.
bpf: Relax the requirement to use preallocated hash maps in tracing progs.
samples/bpf: Reduce syscall overhead in map_perf_test.
selftests/bpf: Improve test coverage of test_maps
bpf: Convert hash map to bpf_mem_alloc.
bpf: Introduce any context BPF specific memory allocator.
selftest/bpf: Add test for bpf_getsockopt()
bpf: Change bpf_getsockopt(SOL_IPV6) to reuse do_ipv6_getsockopt()
bpf: Change bpf_getsockopt(SOL_IP) to reuse do_ip_getsockopt()
bpf: Change bpf_getsockopt(SOL_TCP) to reuse do_tcp_getsockopt()
...
====================
Link: https://lore.kernel.org/r/20220905161136.9150-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We got a recent syzbot report [1] showing a possible misuse
of pfmemalloc page status in TCP zerocopy paths.
Indeed, for pages coming from user space or other layers,
using page_is_pfmemalloc() is moot, and possibly could give
false positives.
There has been attempts to make page_is_pfmemalloc() more robust,
but not using it in the first place in this context is probably better,
removing cpu cycles.
Note to stable teams :
You need to backport 84ce071e38a6 ("net: introduce
__skb_fill_page_desc_noacc") as a prereq.
Race is more probable after commit c07aea3ef4d4
("mm: add a signature in struct page") because page_is_pfmemalloc()
is now using low order bit from page->lru.next, which can change
more often than page->index.
Low order bit should never be set for lru.next (when used as an anchor
in LRU list), so KCSAN report is mostly a false positive.
Backporting to older kernel versions seems not necessary.
[1]
BUG: KCSAN: data-race in lru_add_fn / tcp_build_frag
write to 0xffffea0004a1d2c8 of 8 bytes by task 18600 on cpu 0:
__list_add include/linux/list.h:73 [inline]
list_add include/linux/list.h:88 [inline]
lruvec_add_folio include/linux/mm_inline.h:105 [inline]
lru_add_fn+0x440/0x520 mm/swap.c:228
folio_batch_move_lru+0x1e1/0x2a0 mm/swap.c:246
folio_batch_add_and_move mm/swap.c:263 [inline]
folio_add_lru+0xf1/0x140 mm/swap.c:490
filemap_add_folio+0xf8/0x150 mm/filemap.c:948
__filemap_get_folio+0x510/0x6d0 mm/filemap.c:1981
pagecache_get_page+0x26/0x190 mm/folio-compat.c:104
grab_cache_page_write_begin+0x2a/0x30 mm/folio-compat.c:116
ext4_da_write_begin+0x2dd/0x5f0 fs/ext4/inode.c:2988
generic_perform_write+0x1d4/0x3f0 mm/filemap.c:3738
ext4_buffered_write_iter+0x235/0x3e0 fs/ext4/file.c:270
ext4_file_write_iter+0x2e3/0x1210
call_write_iter include/linux/fs.h:2187 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x468/0x760 fs/read_write.c:578
ksys_write+0xe8/0x1a0 fs/read_write.c:631
__do_sys_write fs/read_write.c:643 [inline]
__se_sys_write fs/read_write.c:640 [inline]
__x64_sys_write+0x3e/0x50 fs/read_write.c:640
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffffea0004a1d2c8 of 8 bytes by task 18611 on cpu 1:
page_is_pfmemalloc include/linux/mm.h:1740 [inline]
__skb_fill_page_desc include/linux/skbuff.h:2422 [inline]
skb_fill_page_desc include/linux/skbuff.h:2443 [inline]
tcp_build_frag+0x613/0xb20 net/ipv4/tcp.c:1018
do_tcp_sendpages+0x3e8/0xaf0 net/ipv4/tcp.c:1075
tcp_sendpage_locked net/ipv4/tcp.c:1140 [inline]
tcp_sendpage+0x89/0xb0 net/ipv4/tcp.c:1150
inet_sendpage+0x7f/0xc0 net/ipv4/af_inet.c:833
kernel_sendpage+0x184/0x300 net/socket.c:3561
sock_sendpage+0x5a/0x70 net/socket.c:1054
pipe_to_sendpage+0x128/0x160 fs/splice.c:361
splice_from_pipe_feed fs/splice.c:415 [inline]
__splice_from_pipe+0x222/0x4d0 fs/splice.c:559
splice_from_pipe fs/splice.c:594 [inline]
generic_splice_sendpage+0x89/0xc0 fs/splice.c:743
do_splice_from fs/splice.c:764 [inline]
direct_splice_actor+0x80/0xa0 fs/splice.c:931
splice_direct_to_actor+0x305/0x620 fs/splice.c:886
do_splice_direct+0xfb/0x180 fs/splice.c:974
do_sendfile+0x3bf/0x910 fs/read_write.c:1249
__do_sys_sendfile64 fs/read_write.c:1317 [inline]
__se_sys_sendfile64 fs/read_write.c:1303 [inline]
__x64_sys_sendfile64+0x10c/0x150 fs/read_write.c:1303
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x0000000000000000 -> 0xffffea0004a1d288
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 18611 Comm: syz-executor.4 Not tainted 6.0.0-rc2-syzkaller-00248-ge022620b5d05-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022
Fixes: c07aea3ef4d4 ("mm: add a signature in struct page")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Sometimes, gcc will optimize the function by spliting it to two or
more functions. In this case, kfree_skb_reason() is splited to
kfree_skb_reason and kfree_skb_reason.part.0. However, the
function/tracepoint trace_kfree_skb() in it needs the return address
of kfree_skb_reason().
This split makes the call chains becomes:
kfree_skb_reason() -> kfree_skb_reason.part.0 -> trace_kfree_skb()
which makes the return address that passed to trace_kfree_skb() be
kfree_skb().
Therefore, introduce '__fix_address', which is the combination of
'__noclone' and 'noinline', and apply it to kfree_skb_reason() to
prevent to from being splited or made inline.
(Is it better to simply apply '__noclone oninline' to kfree_skb_reason?
I'm thinking maybe other functions have the same problems)
Meanwhile, wrap 'skb_unref()' with 'unlikely()', as the compiler thinks
it is likely return true and splits kfree_skb_reason().
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Let 'bpf_flow_dissect' callers know the BPF program's retcode and act
accordingly.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220821113519.116765-2-shmulik.ladkani@gmail.com
|
|
Daniel Borkmann says:
====================
bpf-next 2022-07-22
We've added 73 non-merge commits during the last 12 day(s) which contain
a total of 88 files changed, 3458 insertions(+), 860 deletions(-).
The main changes are:
1) Implement BPF trampoline for arm64 JIT, from Xu Kuohai.
2) Add ksyscall/kretsyscall section support to libbpf to simplify tracing kernel
syscalls through kprobe mechanism, from Andrii Nakryiko.
3) Allow for livepatch (KLP) and BPF trampolines to attach to the same kernel
function, from Song Liu & Jiri Olsa.
4) Add new kfunc infrastructure for netfilter's CT e.g. to insert and change
entries, from Kumar Kartikeya Dwivedi & Lorenzo Bianconi.
5) Add a ksym BPF iterator to allow for more flexible and efficient interactions
with kernel symbols, from Alan Maguire.
6) Bug fixes in libbpf e.g. for uprobe binary path resolution, from Dan Carpenter.
7) Fix BPF subprog function names in stack traces, from Alexei Starovoitov.
8) libbpf support for writing custom perf event readers, from Jon Doron.
9) Switch to use SPDX tag for BPF helper man page, from Alejandro Colomar.
10) Fix xsk send-only sockets when in busy poll mode, from Maciej Fijalkowski.
11) Reparent BPF maps and their charging on memcg offlining, from Roman Gushchin.
12) Multiple follow-up fixes around BPF lsm cgroup infra, from Stanislav Fomichev.
13) Use bootstrap version of bpftool where possible to speed up builds, from Pu Lehui.
14) Cleanup BPF verifier's check_func_arg() handling, from Joanne Koong.
15) Make non-prealloced BPF map allocations low priority to play better with
memcg limits, from Yafang Shao.
16) Fix BPF test runner to reject zero-length data for skbs, from Zhengchao Shao.
17) Various smaller cleanups and improvements all over the place.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (73 commits)
bpf: Simplify bpf_prog_pack_[size|mask]
bpf: Support bpf_trampoline on functions with IPMODIFY (e.g. livepatch)
bpf, x64: Allow to use caller address from stack
ftrace: Allow IPMODIFY and DIRECT ops on the same function
ftrace: Add modify_ftrace_direct_multi_nolock
bpf/selftests: Fix couldn't retrieve pinned program in xdp veth test
bpf: Fix build error in case of !CONFIG_DEBUG_INFO_BTF
selftests/bpf: Fix test_verifier failed test in unprivileged mode
selftests/bpf: Add negative tests for new nf_conntrack kfuncs
selftests/bpf: Add tests for new nf_conntrack kfuncs
selftests/bpf: Add verifier tests for trusted kfunc args
net: netfilter: Add kfuncs to set and change CT status
net: netfilter: Add kfuncs to set and change CT timeout
net: netfilter: Add kfuncs to allocate and insert CT
net: netfilter: Deduplicate code in bpf_{xdp,skb}_ct_lookup
bpf: Add documentation for kfuncs
bpf: Add support for forcing kfunc args to be trusted
bpf: Switch to new kfunc flags infrastructure
tools/resolve_btfids: Add support for 8-byte BTF sets
bpf: Introduce 8-byte BTF set
...
====================
Link: https://lore.kernel.org/r/20220722221218.29943-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kuba/linux
Pavel Begunkov says:
====================
io_uring zerocopy send
The patchset implements io_uring zerocopy send. It works with both registered
and normal buffers, mixing is allowed but not recommended. Apart from usual
request completions, just as with MSG_ZEROCOPY, io_uring separately notifies
the userspace when buffers are freed and can be reused (see API design below),
which is delivered into io_uring's Completion Queue. Those "buffer-free"
notifications are not necessarily per request, but the userspace has control
over it and should explicitly attaching a number of requests to a single
notification. The series also adds some internal optimisations when used with
registered buffers like removing page referencing.
From the kernel networking perspective there are two main changes. The first
one is passing ubuf_info into the network layer from io_uring (inside of an
in kernel struct msghdr). This allows extra optimisations, e.g. ubuf_info
caching on the io_uring side, but also helps to avoid cross-referencing
and synchronisation problems. The second part is an optional optimisation
removing page referencing for requests with registered buffers.
Benchmarking UDP with an optimised version of the selftest (see [1]), which
sends a bunch of requests, waits for completions and repeats. "+ flush" column
posts one additional "buffer-free" notification per request, and just "zc"
doesn't post buffer notifications at all.
NIC (requests / second):
IO size | non-zc | zc | zc + flush
4000 | 495134 | 606420 (+22%) | 558971 (+12%)
1500 | 551808 | 577116 (+4.5%) | 565803 (+2.5%)
1000 | 584677 | 592088 (+1.2%) | 560885 (-4%)
600 | 596292 | 598550 (+0.4%) | 555366 (-6.7%)
dummy (requests / second):
IO size | non-zc | zc | zc + flush
8000 | 1299916 | 2396600 (+84%) | 2224219 (+71%)
4000 | 1869230 | 2344146 (+25%) | 2170069 (+16%)
1200 | 2071617 | 2361960 (+14%) | 2203052 (+6%)
600 | 2106794 | 2381527 (+13%) | 2195295 (+4%)
Previously it also brought a massive performance speedup compared to the
msg_zerocopy tool (see [3]), which is probably not super interesting. There
is also an additional bunch of refcounting optimisations that was omitted from
the series for simplicity and as they don't change the picture drastically,
they will be sent as follow up, as well as flushing optimisations closing the
performance gap b/w two last columns.
For TCP on localhost (with hacks enabling localhost zerocopy) and including
additional overhead for receive:
IO size | non-zc | zc
1200 | 4174 | 4148
4096 | 7597 | 11228
Using a real NIC 1200 bytes, zc is worse than non-zc ~5-10%, maybe the
omitted optimisations will somewhat help, should look better for 4000,
but couldn't test properly because of setup problems.
Links:
liburing (benchmark + tests):
[1] https://github.com/isilence/liburing/tree/zc_v4
kernel repo:
[2] https://github.com/isilence/linux/tree/zc_v4
RFC v1:
[3] https://lore.kernel.org/io-uring/cover.1638282789.git.asml.silence@gmail.com/
RFC v2:
https://lore.kernel.org/io-uring/cover.1640029579.git.asml.silence@gmail.com/
Net patches based:
git@github.com:isilence/linux.git zc_v4-net-base
or
https://github.com/isilence/linux/tree/zc_v4-net-base
API design overview:
The series introduces an io_uring concept of notifactors. From the userspace
perspective it's an entity to which it can bind one or more requests and then
requesting to flush it. Flushing a notifier makes it impossible to attach new
requests to it, and instructs the notifier to post a completion once all
requests attached to it are completed and the kernel doesn't need the buffers
anymore.
Notifications are stored in notification slots, which should be registered as
an array in io_uring. Each slot stores only one notifier at any particular
moment. Flushing removes it from the slot and the slot automatically replaces
it with a new notifier. All operations with notifiers are done by specifying
an index of a slot it's currently in.
When registering a notification the userspace specifies a u64 tag for each
slot, which will be copied in notification completion entries as
cqe::user_data. cqe::res is 0 and cqe::flags is equal to wrap around u32
sequence number counting notifiers of a slot.
====================
Link: https://lore.kernel.org/r/cover.1657643355.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Managed pages contain pinned userspace pages and controlled by upper
layers, there is no need in tracking skb->pfmemalloc for them. Introduce
a helper for filling frags but ignoring page tracking, it'll be needed
later.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some users like io_uring can do page pinning more efficiently, so we
want a way to delegate referencing to other subsystems. For that add
a new flag called SKBFL_MANAGED_FRAG_REFS. When set, skb doesn't hold
page references and upper layers are responsivle to managing page
lifetime.
It's allowed to convert skbs from managed to normal by calling
skb_zcopy_downgrade_managed(). The function will take all needed
page references and clear the flag. It's needed, for instance,
to avoid mixing managed modes.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for custom iov_iter handling to msghdr. The idea is that
in-kernel subsystems want control over how an SG is split.
Signed-off-by: David Ahern <dsahern@kernel.org>
[pavel: move callback into msghdr]
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzbot found an issue [1]: fq_codel_drop() try to drop a flow whitout any
skbs, that is, the flow->head is null.
The root cause, as the [2] says, is because that bpf_prog_test_run_skb()
run a bpf prog which redirects empty skbs.
So we should determine whether the length of the packet modified by bpf
prog or others like bpf_prog_test is valid before forwarding it directly.
LINK: [1] https://syzkaller.appspot.com/bug?id=0b84da80c2917757915afa89f7738a9d16ec96c5
LINK: [2] https://www.spinics.net/lists/netdev/msg777503.html
Reported-by: syzbot+7a12909485b94426aceb@syzkaller.appspotmail.com
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20220715115559.139691-1-shaozhengchao@huawei.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
We don't want to list every single ubuf_info callback in
skb_orphan_frags(), add a flag controlling the behaviour.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the len fields manipulation in the skbs to a helper function.
There is a comment specifically requesting this and there are several
other areas in the code displaying the same pattern which can be
refactored.
This improves code readability.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Link: https://lore.kernel.org/r/20220622160853.GA6478@debian
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sure skb_mac_header(), skb_mac_offset() and skb_mac_header_len() uses
are not fooled if the mac header has not been set.
These checks are enabled if CONFIG_DEBUG_NET=y
This commit will likely expose existing bugs in linux networking stacks.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220620093017.3366713-1-eric.dumazet@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As the skb drop reasons are getting more and more, move the enum
'skb_drop_reason' and related function to the standalone header
'dropreason.h', as Jakub Kicinski suggested.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
While analyzing yet another syzbot report, I found the following
patch very useful. It allows to better understand what went wrong.
This debug info is only enabled if CONFIG_DEBUG_NET=y,
which is the case for syzbot builds.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
skb_data_area_size() is not needed. As Jakub pointed out [1]:
For Rx, drivers can use the size passed during skb allocation or
use skb_tailroom().
For Tx, drivers should use skb_headlen().
[1] https://lore.kernel.org/netdev/CAHNKnsTmH-rGgWi3jtyC=ktM1DW2W1VJkYoTMJV2Z_Bt498bsg@mail.gmail.com/
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The SKB_DR_OR() is used to set the drop reason to a value when it is
not set or specified yet. SKB_NOT_DROPPED_YET should also be considered
as not set.
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Very few drivers actually have Kconfig knobs for adding
-DDEBUG. 8 according to a quick grep, while there are
93 users of skb_checksum_none_assert(). Switch to the
new DEBUG_NET_WARN_ON_ONCE() to catch bad skbs.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220511172305.1382810-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
