| Age | Commit message (Collapse) | Author |
|---|
|
Chain RDMA Writes that convey Write chunks onto the local Send
chain. This means all WRs for an RPC Reply are now posted with a
single ib_post_send() call, and there is a single Send completion
when all of these are done. That reduces both the per-transport
doorbell rate and completion rate.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Refactor to eventually enable svcrdma to post the Write WRs for each
RPC response using the same ib_post_send() as the Send WR (ie, as a
single WR chain).
svc_rdma_result_payload (originally svc_rdma_read_payload) was added
so that the upper layer XDR encoder could identify a range of bytes
to be possibly conveyed by RDMA (if a Write chunk was provided by
the client).
The purpose of commit f6ad77590a5d ("svcrdma: Post RDMA Writes while
XDR encoding replies") was to post as much of the result payload
outside of svc_rdma_sendto() as possible because svc_rdma_sendto()
used to be called with the xpt_mutex held.
However, since commit ca4faf543a33 ("SUNRPC: Move xpt_mutex into
socket xpo_sendto methods"), the xpt_mutex is no longer held when
calling svc_rdma_sendto(). Thus, that benefit is no longer an issue.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Reduce the doorbell and Send completion rates when sending RPC/RDMA
replies that have Reply chunks. NFS READDIR procedures typically
return their result in a Reply chunk, for example.
Instead of calling ib_post_send() to post the Write WRs for the
Reply chunk, and then calling it again to post the Send WR that
conveys the transport header, chain the Write WRs to the Send WR
and call ib_post_send() only once.
Thanks to the Send Queue completion ordering rules, when the Send
WR completes, that guarantees that Write WRs posted before it have
also completed successfully. Thus all Write WRs for the Reply chunk
can remain unsignaled. Instead of handling a Write completion and
then a Send completion, only the Send completion is seen, and it
handles clean up for both the Writes and the Send.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Since the RPC transaction's svc_rdma_send_ctxt will stay around for
the duration of the RDMA Write operation, the write_info structure
for the Reply chunk can reside in the request's svc_rdma_send_ctxt
instead of being allocated separately.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Eventually I'd like the server to post the reply's Send WR along
with any Write WRs using only a single call to ib_post_send(), in
order to reduce the NIC's doorbell rate.
To do this, add an anchor for a WR chain to svc_rdma_send_ctxt, and
refactor svc_rdma_send() to post this WR chain to the Send Queue. For
the moment, the posted chain will continue to contain a single Send
WR.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Having an nfsd thread waiting for an RDMA Read completion is
problematic if the Read responder (ie, the client) stops responding.
We need to go back to handling RDMA Reads by getting the svc scheduler
to call svc_rdma_recvfrom() a second time to finish building an RPC
message after a Read completion.
This is the final patch, and makes several changes that have to
happen concurrently:
1. svc_rdma_process_read_list no longer waits for a completion, but
simply builds and posts the Read WRs.
2. svc_rdma_read_done() now queues a completed Read on
sc_read_complete_q for later processing rather than calling
complete().
3. The completed RPC message is no longer built in the
svc_rdma_process_read_list() path. Finishing the message is now
done in svc_rdma_recvfrom() when it notices work on the
sc_read_complete_q. The "finish building this RPC message" code
is removed from the svc_rdma_process_read_list() path.
This arrangement avoids the need for an nfsd thread to wait for an
RDMA Read non-interruptibly without a timeout. It's basically the
same code structure that Tom Tucker used for Read chunks along with
some clean-up and modernization.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Having an nfsd thread waiting for an RDMA Read completion is
problematic if the Read responder (ie, the client) stops responding.
We need to go back to handling RDMA Reads by allowing the nfsd
thread to return to the svc scheduler, then waking a second thread
finish the RPC message once the Read completion fires.
As a next step, add a list_head upon which completed Reads are queued.
A subsequent patch will make use of this queue.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Having an nfsd thread waiting for an RDMA Read completion is
problematic if the Read responder (the client) stops responding. We
need to go back to handling RDMA Reads by allowing the nfsd thread
to return to the svc scheduler, then waking a second thread finish
the RPC message once the Read completion fires.
To start with, restore the rc_pages field so that RDMA Read pages
can be managed across calls to svc_rdma_recvfrom().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now that the chunk_ctxt for Reads is no longer dynamically allocated
it can be initialized once for the life of the object that contains
it (struct svc_rdma_recv_ctxt).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Since the RDMA Read I/O state is now contained in the recv_ctxt,
svc_rdma_build_read_segment() can use the recv_ctxt to derive that
information rather than the other way around. This removes one usage
of the ri_readctxt field, enabling its removal in a subsequent
patch.
At the same time, the use of ri_rqst can similarly be replaced with
a passed-in function parameter.
Start with build_read_segment() because it is a common utility
function at the bottom of the Read chunk path.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Further clean up: move the starting byte offset field into
svc_rdma_recv_ctxt.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Further clean up: move the page index field into svc_rdma_recv_ctxt.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Since the request's svc_rdma_recv_ctxt will stay around for the
duration of the RDMA Read operation, the contents of struct
svc_rdma_read_info can reside in the request's svc_rdma_recv_ctxt
rather than being allocated separately. This will eventually save a
call to kmalloc() in a hot path.
Start this clean-up by moving the Read chunk's svc_rdma_chunk_ctxt.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Prepare for nestling these into the send and recv ctxts so they
no longer have to be allocated dynamically.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
DMA unmapping can take quite some time, so it should not be handled
in a single-threaded completion handler. Defer releasing send_ctxts
to the recently-added workqueue.
With this patch, DMA unmapping can be handled in parallel, and it
does not cause head-of-queue blocking of Send completions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
To handle work in the background, set up an UNBOUND workqueue for
svcrdma. Subsequent patches will make use of it.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The svc_rdma_recv_ctxt free list uses a lockless list to avoid the
need for a spin lock in the fast path. llist_del_first(), which is
used by svc_rdma_recv_ctxt_get(), requires serialization, however,
when there are multiple list producers that are unserialized.
I mistakenly thought there was only one caller of
svc_rdma_recv_ctxt_get() (svc_rdma_refresh_recvs()), thus explicit
serialization would not be necessary. But there is another caller:
svc_rdma_bc_sendto(), and these two are not serialized against each
other. I haven't seen ill effects that I could directly ascribe to
a lack of serialization. It's just an observation based on code
audit.
When DMA-mapping before sending a Reply, the passed-in struct
svc_rdma_recv_ctxt is used only for its write and reply PCLs. These
are currently always empty in the backchannel case. So, instead of
passing a full svc_rdma_recv_ctxt object to
svc_rdma_map_reply_msg(), let's pass in just the Write and Reply
PCLs.
This change makes it unnecessary for the backchannel to acquire a
dummy svc_rdma_recv_ctxt object when sending an RPC Call. The need
for svc_rdma_recv_ctxt free list serialization is now completely
avoided.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Get rid of the completion wait in svc_rdma_sendto(), and release
pages in the send completion handler again. A subsequent patch will
handle releasing those pages more efficiently.
Reverted by hand: patch -R would not apply cleanly.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Pre-requisite for releasing pages in the send completion handler.
Reverted by hand: patch -R would not apply cleanly.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The physical device's favored NUMA node ID is available when
allocating a recv_ctxt. Use that value instead of relying on the
assumption that the memory allocation happens to be running on a
node close to the device.
This clean up eliminates the hack of destroying recv_ctxts that
were not created by the receive CQ thread -- recv_ctxts are now
always allocated on a "good" node.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Since the ->xprt_ctxt pointer was added to svc_deferred_req, it has not
been sufficient to use kfree() to free a deferred request. We may need
to free the ctxt as well.
As freeing the ctxt is all that ->xpo_release_rqst() does, we repurpose
it to explicit do that even when the ctxt is not stored in an rqst.
So we now have ->xpo_release_ctxt() which is given an xprt and a ctxt,
which may have been taken either from an rqst or from a dreq. The
caller is now responsible for clearing that pointer after the call to
->xpo_release_ctxt.
We also clear dr->xprt_ctxt when the ctxt is moved into a new rqst when
revisiting a deferred request. This ensures there is only one pointer
to the ctxt, so the risk of double freeing in future is reduced. The
new code in svc_xprt_release which releases both the ctxt and any
rq_deferred depends on this.
Fixes: 773f91b2cf3f ("SUNRPC: Fix NFSD's request deferral on RDMA transports")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Relieve contention on sc_rw_ctxt_lock by converting rdma->sc_rw_ctxts
to an llist.
The goal is to reduce the average overhead of Send completions,
because a transport's completion handlers are single-threaded on
one CPU core. This change reduces CPU utilization of each Send
completion by 2-3% on my server.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-By: Tom Talpey <tom@talpey.com>
|
|
/proc/lock_stat indicates the the sc_send_lock is heavily
contended when the server is under load from a single client.
To address this, convert the send_ctxt free list to an llist.
Returning an item to the send_ctxt cache is now waitless, which
reduces the instruction path length in the single-threaded Send
handler (svc_rdma_wc_send).
The goal is to enable the ib_comp_wq worker to handle a higher
RPC/RDMA Send completion rate given the same CPU resources. This
change reduces CPU utilization of Send completion by 2-3% on my
server.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-By: Tom Talpey <tom@talpey.com>
|
|
Because wake_up() takes an IRQ-safe lock, it can be expensive,
especially to call inside of a single-threaded completion handler.
What's more, the Send wait queue almost never has waiters, so
most of the time, this is an expensive no-op.
As always, the goal is to reduce the average overhead of each
completion, because a transport's completion handlers are single-
threaded on one CPU core. This change reduces CPU utilization of
the Send completion thread by 2-3% on my server.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-By: Tom Talpey <tom@talpey.com>
|
|
These fields are no longer used.
The size of struct svc_rdma_recv_ctxt is now less than 300 bytes on
x86_64, down from 2440 bytes.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now that svc_rdma_recvfrom() waits for Read completion,
sc_read_complete_q is no longer used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up. This significantly reduces the size of struct
svc_rdma_send_ctxt.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently svc_rdma_sendto() migrates xdr_buf pages into a separate
page list and NULLs out a bunch of entries in rq_pages while the
pages are under I/O. The Send completion handler then frees those
pages later.
Instead, let's wait for the Send completion, then handle page
releasing in the nfsd thread. I'd like to avoid the cost of 250+
put_page() calls in the Send completion handler, which is single-
threaded.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Post more Receives when the number of pending Receives drops below
a water mark. The batch mechanism is disabled if the underlying
device cannot support a reasonably-sized Receive Queue.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
I tested commit 43042b90cae1 ("svcrdma: Reduce Receive doorbell
rate") with mlx4 (IB) and software iWARP and didn't find any
issues. However, I recently got my hardware iWARP setup back on
line (FastLinQ) and it's crashing hard on this commit (confirmed
via bisect).
The failure mode is complex.
- After a connection is established, the first Receive completes
normally.
- But the second and third Receives have garbage in their Receive
buffers. The server responds with ERR_VERS as a result.
- When the client tears down the connection to retry, a couple
of posted Receives flush twice, and that corrupts the recv_ctxt
free list.
- __svc_rdma_free then faults or loops infinitely while destroying
the xprt's recv_ctxts.
Since 43042b90cae1 ("svcrdma: Reduce Receive doorbell rate") does
not fix a bug but is a scalability enhancement, it's safe and
appropriate to revert it while working on a replacement.
Fixes: 43042b90cae1 ("svcrdma: Reduce Receive doorbell rate")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This is similar to commit e340c2d6ef2a ("xprtrdma: Reduce the
doorbell rate (Receive)") which added Receive batching to the
client.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up. We are not permitted to remove old proc files. Instead,
convert these variables to stubs that are only ever allowed to
display a value of zero.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now that we have an efficient mechanism to update these two stats,
let's start maintaining them again.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Avoid the overhead of a memory bus lock cycle for counting a value
that is hardly every used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Receives are frequent events. Avoid the overhead of a memory bus
lock cycle for counting a value that is hardly every used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
As a pre-requisite for handling multiple Read chunks in each Read
list, convert svc_rdma_recv_read_chunk() to use the new parsed Read
chunk list.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: These pointers are no longer used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Refactor svc_rdma_send_reply_chunk() so that it Sends only the parts
of rq_res that do not contain a result payload.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Refactor: svc_rdma_map_reply_msg() is restructured to DMA map only
the parts of rq_res that do not contain a result payload.
This change has been tested to confirm that it does not cause a
regression in the no Write chunk and single Write chunk cases.
Multiple Write chunks have not been tested.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
When counting the number of SGEs needed to construct a Send request,
do not count result payloads. And, when copying the Reply message
into the pull-up buffer, result payloads are not to be copied to the
Send buffer.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Refactor: Instead of re-parsing the ingress RPC Call transport
header when constructing RDMA Writes, use the new parsed chunk lists
for the Write list and Reply chunk, which are version-agnostic and
already XDR-decoded.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Refactor: Don't duplicate header decoding smarts here. Instead, use
the new parsed chunk lists.
Note that the XID sanity test is also removed. The XID is already
looked up by the cb handler, and is rejected if it's not recognized.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This simple data structure binds the location of each data payload
inside of an RPC message to the chunk that will be used to push it
to or pull it from the client.
There are several benefits to this small additional overhead:
* It enables support for more than one chunk in incoming Read and
Write lists.
* It translates the version-specific on-the-wire format into a
generic in-memory structure, enabling support for multiple
versions of the RPC/RDMA transport protocol.
* It enables the server to re-organize a chunk list if it needs to
adjust where Read chunk data lands in server memory without
altering the contents of the XDR-encoded Receive buffer.
Construction of these lists is done while sanity checking each
incoming RPC/RDMA header. Subsequent patches will make use of the
generated data structures.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The only RPC/RDMA ordering requirement between RDMA Writes and RDMA
Sends is that the responder must post the Writes on the Send queue
before posting the Send that conveys the RPC Reply for that Write
payload.
The Linux NFS server implementation now has a transport method that
can post result Payload Writes earlier than svc_rdma_sendto:
->xpo_result_payload()
This gets RDMA Writes going earlier so they are more likely to be
complete at the remote end before the Send completes.
Some care must be taken with pulled-up Replies. We don't want to
push the Write chunk and then send the same payload data via Send.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: "result payload" is a less confusing name for these
payloads. "READ payload" reflects only the NFS usage.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
First, refactor: Dereference the svc_rdma_send_ctxt inside
svc_rdma_send() instead of at every call site.
Then, it can be passed into trace_svcrdma_post_send() to get the
proper completion ID.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Set up a completion ID in each svc_rdma_send_ctxt. The ID is used
to match an incoming Send completion to a transport and to a
previous ib_post_send().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Set up a completion ID in each svc_rdma_recv_ctxt. The ID is used
to match an incoming Receive completion to a transport and to a
previous ib_post_recv().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Pavane pour une infante défunte.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
