| Age | Commit message (Collapse) | Author |
|---|
|
When CONFIG_DEBUG_INFO_BTF is disabled, bpf_get_btf_vmlinux can return a
NULL pointer. Check for it in btf_get_module_btf to prevent a NULL pointer
dereference.
While kernel test robot only complained about this specific case, let's
also check for NULL in other call sites of bpf_get_btf_vmlinux.
Fixes: 9492450fd287 ("bpf: Always raise reference in btf_get_module_btf")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220320143003.589540-1-memxor@gmail.com
|
|
Align it with helpers like bpf_find_btf_id, so all functions returning
BTF in out parameter follow the same rule of raising reference
consistently, regardless of module or vmlinux BTF.
Adjust existing callers to handle the change accordinly.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220317115957.3193097-10-memxor@gmail.com
|
|
In next few patches, we need a helper that searches all kernel BTFs
(vmlinux and module BTFs), and finds the type denoted by 'name' and
'kind'. Turns out bpf_btf_find_by_name_kind already does the same thing,
but it instead returns a BTF ID and optionally fd (if module BTF). This
is used for relocating ksyms in BPF loader code (bpftool gen skel -L).
We extract the core code out into a new helper bpf_find_btf_id, which
returns the BTF ID in the return value, and BTF pointer in an out
parameter. The reference for the returned BTF pointer is always raised,
hence user must either transfer it (e.g. to a fd), or release it after
use.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220317115957.3193097-2-memxor@gmail.com
|
|
With the introduction of the btf_type_tag "percpu", we can add a
MEM_PERCPU to identify those pointers that point to percpu memory.
The ability of differetiating percpu pointers from regular memory
pointers have two benefits:
1. It forbids unexpected use of percpu pointers, such as direct loads.
In kernel, there are special functions used for accessing percpu
memory. Directly loading percpu memory is meaningless. We already
have BPF helpers like bpf_per_cpu_ptr() and bpf_this_cpu_ptr() that
wrap the kernel percpu functions. So we can now convert percpu
pointers into regular pointers in a safe way.
2. Previously, bpf_per_cpu_ptr() and bpf_this_cpu_ptr() only work on
PTR_TO_PERCPU_BTF_ID, a special reg_type which describes static
percpu variables in kernel (we rely on pahole to encode them into
vmlinux BTF). Now, since we can identify __percpu tagged pointers,
we can also identify dynamically allocated percpu memory as well.
It means we can use bpf_xxx_cpu_ptr() on dynamic percpu memory.
This would be very convenient when accessing fields like
"cgroup->rstat_cpu".
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220304191657.981240-4-haoluo@google.com
|
|
Let's ensure that the PTR_TO_BTF_ID reg being passed in to release BPF
helpers and kfuncs always has its offset set to 0. While not a real
problem now, there's a very real possibility this will become a problem
when more and more kfuncs are exposed, and more BPF helpers are added
which can release PTR_TO_BTF_ID.
Previous commits already protected against non-zero var_off. One of the
case we are concerned about now is when we have a type that can be
returned by e.g. an acquire kfunc:
struct foo {
int a;
int b;
struct bar b;
};
... and struct bar is also a type that can be returned by another
acquire kfunc.
Then, doing the following sequence:
struct foo *f = bpf_get_foo(); // acquire kfunc
if (!f)
return 0;
bpf_put_bar(&f->b); // release kfunc
... would work with the current code, since the btf_struct_ids_match
takes reg->off into account for matching pointer type with release kfunc
argument type, but would obviously be incorrect, and most likely lead to
a kernel crash. A test has been included later to prevent regressions in
this area.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220304224645.3677453-5-memxor@gmail.com
|
|
When kfunc support was added, check_ctx_reg was called for PTR_TO_CTX
register, but no offset checks were made for PTR_TO_BTF_ID. Only
reg->off was taken into account by btf_struct_ids_match, which protected
against type mismatch due to non-zero reg->off, but when reg->off was
zero, a user could set the variable offset of the register and allow it
to be passed to kfunc, leading to bad pointer being passed into the
kernel.
Fix this by reusing the extracted helper check_func_arg_reg_off from
previous commit, and make one call before checking all supported
register types. Since the list is maintained, any future changes will be
taken into account by updating check_func_arg_reg_off. This function
prevents non-zero var_off to be set for PTR_TO_BTF_ID, but still allows
a fixed non-zero reg->off, which is needed for type matching to work
correctly when using pointer arithmetic.
ARG_DONTCARE is passed as arg_type, since kfunc doesn't support
accepting a ARG_PTR_TO_ALLOC_MEM without relying on size of parameter
type from BTF (in case of pointer), or using a mem, len pair. The
forcing of offset check for ARG_PTR_TO_ALLOC_MEM is done because ringbuf
helpers obtain the size from the header located at the beginning of the
memory region, hence any changes to the original pointer shouldn't be
allowed. In case of kfunc, size is always known, either at verification
time, or using the length parameter, hence this forcing is not required.
Since this check will happen once already for PTR_TO_CTX, remove the
check_ptr_off_reg call inside its block.
Fixes: e6ac2450d6de ("bpf: Support bpf program calling kernel function")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220304224645.3677453-3-memxor@gmail.com
|
|
BTF mismatch can occur for a separately-built module even when the ABI is
otherwise compatible and nothing else would prevent successfully loading.
Add a new Kconfig to control how mismatches are handled. By default, preserve
the current behavior of refusing to load the module. If MODULE_ALLOW_BTF_MISMATCH
is enabled, load the module but ignore its BTF information.
Suggested-by: Yonghong Song <yhs@fb.com>
Suggested-by: Michal Suchánek <msuchanek@suse.de>
Signed-off-by: Connor O'Brien <connoro@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/CAADnVQJ+OVPnBz8z3vNu8gKXX42jCUqfuvhWAyCQDu8N_yqqwQ@mail.gmail.com
Link: https://lore.kernel.org/bpf/20220223012814.1898677-1-connoro@google.com
|
|
Add leading space to spdx tag
Use // for spdx c file comment
Replacements
resereved to reserved
inbetween to in between
everytime to every time
intutivie to intuitive
currenct to current
encontered to encountered
referenceing to referencing
upto to up to
exectuted to executed
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220220184055.3608317-1-trix@redhat.com
|
|
Kernel test robot reported below error ->
kernel/bpf/btf.c:6718 btf_populate_kfunc_set()
error: uninitialized symbol 'ret'.
Initialize ret to 0.
Fixes: dee872e124e8 ("bpf: Populate kfunc BTF ID sets in struct btf")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Souptick Joarder (HPE) <jrdr.linux@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20220219163915.125770-1-jrdr.linux@gmail.com
|
|
Daniel Borkmann says:
====================
bpf-next 2022-02-17
We've added 29 non-merge commits during the last 8 day(s) which contain
a total of 34 files changed, 1502 insertions(+), 524 deletions(-).
The main changes are:
1) Add BTFGen support to bpftool which allows to use CO-RE in kernels without
BTF info, from Mauricio Vásquez, Rafael David Tinoco, Lorenzo Fontana and
Leonardo Di Donato. (Details: https://lpc.events/event/11/contributions/948/)
2) Prepare light skeleton to be used in both kernel module and user space
and convert bpf_preload.ko to use light skeleton, from Alexei Starovoitov.
3) Rework bpftool's versioning scheme and align with libbpf's version number;
also add linked libbpf version info to "bpftool version", from Quentin Monnet.
4) Add minimal C++ specific additions to bpftool's skeleton codegen to
facilitate use of C skeletons in C++ applications, from Andrii Nakryiko.
5) Add BPF verifier sanity check whether relative offset on kfunc calls overflows
desc->imm and reject the BPF program if the case, from Hou Tao.
6) Fix libbpf to use a dynamically allocated buffer for netlink messages to
avoid receiving truncated messages on some archs, from Toke Høiland-Jørgensen.
7) Various follow-up fixes to the JIT bpf_prog_pack allocator, from Song Liu.
8) Various BPF selftest and vmtest.sh fixes, from Yucong Sun.
9) Fix bpftool pretty print handling on dumping map keys/values when no BTF
is available, from Jiri Olsa and Yinjun Zhang.
10) Extend XDP frags selftest to check for invalid length, from Lorenzo Bianconi.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (29 commits)
bpf: bpf_prog_pack: Set proper size before freeing ro_header
selftests/bpf: Fix crash in core_reloc when bpftool btfgen fails
selftests/bpf: Fix vmtest.sh to launch smp vm.
libbpf: Fix memleak in libbpf_netlink_recv()
bpftool: Fix C++ additions to skeleton
bpftool: Fix pretty print dump for maps without BTF loaded
selftests/bpf: Test "bpftool gen min_core_btf"
bpftool: Gen min_core_btf explanation and examples
bpftool: Implement btfgen_get_btf()
bpftool: Implement "gen min_core_btf" logic
bpftool: Add gen min_core_btf command
libbpf: Expose bpf_core_{add,free}_cands() to bpftool
libbpf: Split bpf_core_apply_relo()
bpf: Reject kfunc calls that overflow insn->imm
selftests/bpf: Add Skeleton templated wrapper as an example
bpftool: Add C++-specific open/load/etc skeleton wrappers
selftests/bpf: Fix GCC11 compiler warnings in -O2 mode
bpftool: Fix the error when lookup in no-btf maps
libbpf: Use dynamically allocated buffer when receiving netlink messages
libbpf: Fix libbpf.map inheritance chain for LIBBPF_0.7.0
...
====================
Link: https://lore.kernel.org/r/20220217232027.29831-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fast path bpf marge for some -next work.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When commit e6ac2450d6de ("bpf: Support bpf program calling kernel function") added
kfunc support, it defined reg2btf_ids as a cheap way to translate the verifier
reg type to the appropriate btf_vmlinux BTF ID, however
commit c25b2ae13603 ("bpf: Replace PTR_TO_XXX_OR_NULL with PTR_TO_XXX | PTR_MAYBE_NULL")
moved the __BPF_REG_TYPE_MAX from the last member of bpf_reg_type enum to after
the base register types, and defined other variants using type flag
composition. However, now, the direct usage of reg->type to index into
reg2btf_ids may no longer fall into __BPF_REG_TYPE_MAX range, and hence lead to
out of bounds access and kernel crash on dereference of bad pointer.
Fixes: c25b2ae13603 ("bpf: Replace PTR_TO_XXX_OR_NULL with PTR_TO_XXX | PTR_MAYBE_NULL")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220216201943.624869-1-memxor@gmail.com
|
|
BTFGen needs to run the core relocation logic in order to understand
what are the types involved in a given relocation.
Currently bpf_core_apply_relo() calculates and **applies** a relocation
to an instruction. Having both operations in the same function makes it
difficult to only calculate the relocation without patching the
instruction. This commit splits that logic in two different phases: (1)
calculate the relocation and (2) patch the instruction.
For the first phase bpf_core_apply_relo() is renamed to
bpf_core_calc_relo_insn() who is now only on charge of calculating the
relocation, the second phase uses the already existing
bpf_core_patch_insn(). bpf_object__relocate_core() uses both of them and
the BTFGen will use only bpf_core_calc_relo_insn().
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Rafael David Tinoco <rafael.tinoco@aquasec.com>
Signed-off-by: Lorenzo Fontana <lorenzo.fontana@elastic.co>
Signed-off-by: Leonardo Di Donato <leonardo.didonato@elastic.co>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220215225856.671072-2-mauricio@kinvolk.io
|
|
Adopt libbpf's bpf_core_types_are_compat() for kernel duty by adding
explicit recursion limit of 2 which is enough to handle 2 levels of
function prototypes.
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220204005519.60361-2-mcroce@linux.microsoft.com
|
|
syzbot reported a btf decl_tag bug with stack trace below:
general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 3592 Comm: syz-executor914 Not tainted 5.16.0-syzkaller-11424-gb7892f7d5cb2 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:btf_type_vlen include/linux/btf.h:231 [inline]
RIP: 0010:btf_decl_tag_resolve+0x83e/0xaa0 kernel/bpf/btf.c:3910
...
Call Trace:
<TASK>
btf_resolve+0x251/0x1020 kernel/bpf/btf.c:4198
btf_check_all_types kernel/bpf/btf.c:4239 [inline]
btf_parse_type_sec kernel/bpf/btf.c:4280 [inline]
btf_parse kernel/bpf/btf.c:4513 [inline]
btf_new_fd+0x19fe/0x2370 kernel/bpf/btf.c:6047
bpf_btf_load kernel/bpf/syscall.c:4039 [inline]
__sys_bpf+0x1cbb/0x5970 kernel/bpf/syscall.c:4679
__do_sys_bpf kernel/bpf/syscall.c:4738 [inline]
__se_sys_bpf kernel/bpf/syscall.c:4736 [inline]
__x64_sys_bpf+0x75/0xb0 kernel/bpf/syscall.c:4736
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
The kasan error is triggered with an illegal BTF like below:
type 0: void
type 1: int
type 2: decl_tag to func type 3
type 3: func to func_proto type 8
The total number of types is 4 and the type 3 is illegal
since its func_proto type is out of range.
Currently, the target type of decl_tag can be struct/union, var or func.
Both struct/union and var implemented their own 'resolve' callback functions
and hence handled properly in kernel.
But func type doesn't have 'resolve' callback function. When
btf_decl_tag_resolve() tries to check func type, it tries to get
vlen of its func_proto type, which triggered the above kasan error.
To fix the issue, btf_decl_tag_resolve() needs to do btf_func_check()
before trying to accessing func_proto type.
In the current implementation, func type is checked with
btf_func_check() in the main checking function btf_check_all_types().
To fix the above kasan issue, let us implement 'resolve' callback
func type properly. The 'resolve' callback will be also called
in btf_check_all_types() for func types.
Fixes: b5ea834dde6b ("bpf: Support for new btf kind BTF_KIND_TAG")
Reported-by: syzbot+53619be9444215e785ed@syzkaller.appspotmail.com
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220203191727.741862-1-yhs@fb.com
|
|
BPF verifier supports direct memory access for BPF_PROG_TYPE_TRACING type
of bpf programs, e.g., a->b. If "a" is a pointer
pointing to kernel memory, bpf verifier will allow user to write
code in C like a->b and the verifier will translate it to a kernel
load properly. If "a" is a pointer to user memory, it is expected
that bpf developer should be bpf_probe_read_user() helper to
get the value a->b. Without utilizing BTF __user tagging information,
current verifier will assume that a->b is a kernel memory access
and this may generate incorrect result.
Now BTF contains __user information, it can check whether the
pointer points to a user memory or not. If it is, the verifier
can reject the program and force users to use bpf_probe_read_user()
helper explicitly.
In the future, we can easily extend btf_add_space for other
address space tagging, for example, rcu/percpu etc.
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220127154606.654961-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Commit dee872e124e8 ("bpf: Populate kfunc BTF ID sets in struct btf")
breaks loading of some modules when CONFIG_DEBUG_INFO_BTF is not set.
register_btf_kfunc_id_set returns -ENOENT to the callers when
there is no module btf. Let's return 0 (success) instead to let
those modules work in !CONFIG_DEBUG_INFO_BTF cases.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Fixes: dee872e124e8 ("bpf: Populate kfunc BTF ID sets in struct btf")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20220126001340.1573649-1-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-01-24
We've added 80 non-merge commits during the last 14 day(s) which contain
a total of 128 files changed, 4990 insertions(+), 895 deletions(-).
The main changes are:
1) Add XDP multi-buffer support and implement it for the mvneta driver,
from Lorenzo Bianconi, Eelco Chaudron and Toke Høiland-Jørgensen.
2) Add unstable conntrack lookup helpers for BPF by using the BPF kfunc
infra, from Kumar Kartikeya Dwivedi.
3) Extend BPF cgroup programs to export custom ret value to userspace via
two helpers bpf_get_retval() and bpf_set_retval(), from YiFei Zhu.
4) Add support for AF_UNIX iterator batching, from Kuniyuki Iwashima.
5) Complete missing UAPI BPF helper description and change bpf_doc.py script
to enforce consistent & complete helper documentation, from Usama Arif.
6) Deprecate libbpf's legacy BPF map definitions and streamline XDP APIs to
follow tc-based APIs, from Andrii Nakryiko.
7) Support BPF_PROG_QUERY for BPF programs attached to sockmap, from Di Zhu.
8) Deprecate libbpf's bpf_map__def() API and replace users with proper getters
and setters, from Christy Lee.
9) Extend libbpf's btf__add_btf() with an additional hashmap for strings to
reduce overhead, from Kui-Feng Lee.
10) Fix bpftool and libbpf error handling related to libbpf's hashmap__new()
utility function, from Mauricio Vásquez.
11) Add support to BTF program names in bpftool's program dump, from Raman Shukhau.
12) Fix resolve_btfids build to pick up host flags, from Connor O'Brien.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (80 commits)
selftests, bpf: Do not yet switch to new libbpf XDP APIs
selftests, xsk: Fix rx_full stats test
bpf: Fix flexible_array.cocci warnings
xdp: disable XDP_REDIRECT for xdp frags
bpf: selftests: add CPUMAP/DEVMAP selftests for xdp frags
bpf: selftests: introduce bpf_xdp_{load,store}_bytes selftest
net: xdp: introduce bpf_xdp_pointer utility routine
bpf: generalise tail call map compatibility check
libbpf: Add SEC name for xdp frags programs
bpf: selftests: update xdp_adjust_tail selftest to include xdp frags
bpf: test_run: add xdp_shared_info pointer in bpf_test_finish signature
bpf: introduce frags support to bpf_prog_test_run_xdp()
bpf: move user_size out of bpf_test_init
bpf: add frags support to xdp copy helpers
bpf: add frags support to the bpf_xdp_adjust_tail() API
bpf: introduce bpf_xdp_get_buff_len helper
net: mvneta: enable jumbo frames if the loaded XDP program support frags
bpf: introduce BPF_F_XDP_HAS_FRAGS flag in prog_flags loading the ebpf program
net: mvneta: add frags support to XDP_TX
xdp: add frags support to xdp_return_{buff/frame}
...
====================
Link: https://lore.kernel.org/r/20220124221235.18993-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Generalize the check_ctx_reg() helper function into a more generic named one
so that it can be reused for other register types as well to check whether
their offset is non-zero. No functional change.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch adds verifier support for PTR_TO_BTF_ID return type of kfunc
to be a reference, by reusing acquire_reference_state/release_reference
support for existing in-kernel bpf helpers.
We make use of the three kfunc types:
- BTF_KFUNC_TYPE_ACQUIRE
Return true if kfunc_btf_id is an acquire kfunc. This will
acquire_reference_state for the returned PTR_TO_BTF_ID (this is the
only allow return value). Note that acquire kfunc must always return a
PTR_TO_BTF_ID{_OR_NULL}, otherwise the program is rejected.
- BTF_KFUNC_TYPE_RELEASE
Return true if kfunc_btf_id is a release kfunc. This will release the
reference to the passed in PTR_TO_BTF_ID which has a reference state
(from earlier acquire kfunc).
The btf_check_func_arg_match returns the regno (of argument register,
hence > 0) if the kfunc is a release kfunc, and a proper referenced
PTR_TO_BTF_ID is being passed to it.
This is similar to how helper call check uses bpf_call_arg_meta to
store the ref_obj_id that is later used to release the reference.
Similar to in-kernel helper, we only allow passing one referenced
PTR_TO_BTF_ID as an argument. It can also be passed in to normal
kfunc, but in case of release kfunc there must always be one
PTR_TO_BTF_ID argument that is referenced.
- BTF_KFUNC_TYPE_RET_NULL
For kfunc returning PTR_TO_BTF_ID, tells if it can be NULL, hence
force caller to mark the pointer not null (using check) before
accessing it. Note that taking into account the case fixed by commit
93c230e3f5bd ("bpf: Enforce id generation for all may-be-null register type")
we assign a non-zero id for mark_ptr_or_null_reg logic. Later, if more
return types are supported by kfunc, which have a _OR_NULL variant, it
might be better to move this id generation under a common
reg_type_may_be_null check, similar to the case in the commit.
Referenced PTR_TO_BTF_ID is currently only limited to kfunc, but can be
extended in the future to other BPF helpers as well. For now, we can
rely on the btf_struct_ids_match check to ensure we get the pointer to
the expected struct type. In the future, care needs to be taken to avoid
ambiguity for reference PTR_TO_BTF_ID passed to release function, in
case multiple candidates can release same BTF ID.
e.g. there might be two release kfuncs (or kfunc and helper):
foo(struct abc *p);
bar(struct abc *p);
... such that both release a PTR_TO_BTF_ID with btf_id of struct abc. In
this case we would need to track the acquire function corresponding to
the release function to avoid type confusion, and store this information
in the register state so that an incorrect program can be rejected. This
is not a problem right now, hence it is left as an exercise for the
future patch introducing such a case in the kernel.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220114163953.1455836-6-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
BPF helpers can associate two adjacent arguments together to pass memory
of certain size, using ARG_PTR_TO_MEM and ARG_CONST_SIZE arguments.
Since we don't use bpf_func_proto for kfunc, we need to leverage BTF to
implement similar support.
The ARG_CONST_SIZE processing for helpers is refactored into a common
check_mem_size_reg helper that is shared with kfunc as well. kfunc
ptr_to_mem support follows logic similar to global functions, where
verification is done as if pointer is not null, even when it may be
null.
This leads to a simple to follow rule for writing kfunc: always check
the argument pointer for NULL, except when it is PTR_TO_CTX. Also, the
PTR_TO_CTX case is also only safe when the helper expecting pointer to
program ctx is not exposed to other programs where same struct is not
ctx type. In that case, the type check will fall through to other cases
and would permit passing other types of pointers, possibly NULL at
runtime.
Currently, we require the size argument to be suffixed with "__sz" in
the parameter name. This information is then recorded in kernel BTF and
verified during function argument checking. In the future we can use BTF
tagging instead, and modify the kernel function definitions. This will
be a purely kernel-side change.
This allows us to have some form of backwards compatibility for
structures that are passed in to the kernel function with their size,
and allow variable length structures to be passed in if they are
accompanied by a size parameter.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220114163953.1455836-5-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Completely remove the old code for check_kfunc_call to help it work
with modules, and also the callback itself.
The previous commit adds infrastructure to register all sets and put
them in vmlinux or module BTF, and concatenates all related sets
organized by the hook and the type. Once populated, these sets remain
immutable for the lifetime of the struct btf.
Also, since we don't need the 'owner' module anywhere when doing
check_kfunc_call, drop the 'btf_modp' module parameter from
find_kfunc_desc_btf.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220114163953.1455836-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch prepares the kernel to support putting all kinds of kfunc BTF
ID sets in the struct btf itself. The various kernel subsystems will
make register_btf_kfunc_id_set call in the initcalls (for built-in code
and modules).
The 'hook' is one of the many program types, e.g. XDP and TC/SCHED_CLS,
STRUCT_OPS, and 'types' are check (allowed or not), acquire, release,
and ret_null (with PTR_TO_BTF_ID_OR_NULL return type).
A maximum of BTF_KFUNC_SET_MAX_CNT (32) kfunc BTF IDs are permitted in a
set of certain hook and type for vmlinux sets, since they are allocated
on demand, and otherwise set as NULL. Module sets can only be registered
once per hook and type, hence they are directly assigned.
A new btf_kfunc_id_set_contains function is exposed for use in verifier,
this new method is faster than the existing list searching method, and
is also automatic. It also lets other code not care whether the set is
unallocated or not.
Note that module code can only do single register_btf_kfunc_id_set call
per hook. This is why sorting is only done for in-kernel vmlinux sets,
because there might be multiple sets for the same hook and type that
must be concatenated, hence sorting them is required to ensure bsearch
in btf_id_set_contains continues to work correctly.
Next commit will update the kernel users to make use of this
infrastructure.
Finally, add __maybe_unused annotation for BTF ID macros for the
!CONFIG_DEBUG_INFO_BTF case, so that they don't produce warnings during
build time.
The previous patch is also needed to provide synchronization against
initialization for module BTF's kfunc_set_tab introduced here, as
described below:
The kfunc_set_tab pointer in struct btf is write-once (if we consider
the registration phase (comprised of multiple register_btf_kfunc_id_set
calls) as a single operation). In this sense, once it has been fully
prepared, it isn't modified, only used for lookup (from the verifier
context).
For btf_vmlinux, it is initialized fully during the do_initcalls phase,
which happens fairly early in the boot process, before any processes are
present. This also eliminates the possibility of bpf_check being called
at that point, thus relieving us of ensuring any synchronization between
the registration and lookup function (btf_kfunc_id_set_contains).
However, the case for module BTF is a bit tricky. The BTF is parsed,
prepared, and published from the MODULE_STATE_COMING notifier callback.
After this, the module initcalls are invoked, where our registration
function will be called to populate the kfunc_set_tab for module BTF.
At this point, BTF may be available to userspace while its corresponding
module is still intializing. A BTF fd can then be passed to verifier
using bpf syscall (e.g. for kfunc call insn).
Hence, there is a race window where verifier may concurrently try to
lookup the kfunc_set_tab. To prevent this race, we must ensure the
operations are serialized, or waiting for the __init functions to
complete.
In the earlier registration API, this race was alleviated as verifier
bpf_check_mod_kfunc_call didn't find the kfunc BTF ID until it was added
by the registration function (called usually at the end of module __init
function after all module resources have been initialized). If the
verifier made the check_kfunc_call before kfunc BTF ID was added to the
list, it would fail verification (saying call isn't allowed). The
access to list was protected using a mutex.
Now, it would still fail verification, but for a different reason
(returning ENXIO due to the failed btf_try_get_module call in
add_kfunc_call), because if the __init call is in progress the module
will be in the middle of MODULE_STATE_COMING -> MODULE_STATE_LIVE
transition, and the BTF_MODULE_LIVE flag for btf_module instance will
not be set, so the btf_try_get_module call will fail.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220114163953.1455836-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
While working on code to populate kfunc BTF ID sets for module BTF from
its initcall, I noticed that by the time the initcall is invoked, the
module BTF can already be seen by userspace (and the BPF verifier). The
existing btf_try_get_module calls try_module_get which only fails if
mod->state == MODULE_STATE_GOING, i.e. it can increment module reference
when module initcall is happening in parallel.
Currently, BTF parsing happens from MODULE_STATE_COMING notifier
callback. At this point, the module initcalls have not been invoked.
The notifier callback parses and prepares the module BTF, allocates an
ID, which publishes it to userspace, and then adds it to the btf_modules
list allowing the kernel to invoke btf_try_get_module for the BTF.
However, at this point, the module has not been fully initialized (i.e.
its initcalls have not finished). The code in module.c can still fail
and free the module, without caring for other users. However, nothing
stops btf_try_get_module from succeeding between the state transition
from MODULE_STATE_COMING to MODULE_STATE_LIVE.
This leads to a use-after-free issue when BPF program loads
successfully in the state transition, load_module's do_init_module call
fails and frees the module, and BPF program fd on close calls module_put
for the freed module. Future patch has test case to verify we don't
regress in this area in future.
There are multiple points after prepare_coming_module (in load_module)
where failure can occur and module loading can return error. We
illustrate and test for the race using the last point where it can
practically occur (in module __init function).
An illustration of the race:
CPU 0 CPU 1
load_module
notifier_call(MODULE_STATE_COMING)
btf_parse_module
btf_alloc_id // Published to userspace
list_add(&btf_mod->list, btf_modules)
mod->init(...)
... ^
bpf_check |
check_pseudo_btf_id |
btf_try_get_module |
returns true | ...
... | module __init in progress
return prog_fd | ...
... V
if (ret < 0)
free_module(mod)
...
close(prog_fd)
...
bpf_prog_free_deferred
module_put(used_btf.mod) // use-after-free
We fix this issue by setting a flag BTF_MODULE_F_LIVE, from the notifier
callback when MODULE_STATE_LIVE state is reached for the module, so that
we return NULL from btf_try_get_module for modules that are not fully
formed. Since try_module_get already checks that module is not in
MODULE_STATE_GOING state, and that is the only transition a live module
can make before being removed from btf_modules list, this is enough to
close the race and prevent the bug.
A later selftest patch crafts the race condition artifically to verify
that it has been fixed, and that verifier fails to load program (with
ENXIO).
Lastly, a couple of comments:
1. Even if this race didn't exist, it seems more appropriate to only
access resources (ksyms and kfuncs) of a fully formed module which
has been initialized completely.
2. This patch was born out of need for synchronization against module
initcall for the next patch, so it is needed for correctness even
without the aforementioned race condition. The BTF resources
initialized by module initcall are set up once and then only looked
up, so just waiting until the initcall has finished ensures correct
behavior.
Fixes: 541c3bad8dc5 ("bpf: Support BPF ksym variables in kernel modules")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220114163953.1455836-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Allow passing PTR_TO_CTX, if the kfunc expects a matching struct type,
and punt to PTR_TO_MEM block if reg->type does not fall in one of
PTR_TO_BTF_ID or PTR_TO_SOCK* types. This will be used by future commits
to get access to XDP and TC PTR_TO_CTX, and pass various data (flags,
l4proto, netns_id, etc.) encoded in opts struct passed as pointer to
kfunc.
For PTR_TO_MEM support, arguments are currently limited to pointer to
scalar, or pointer to struct composed of scalars. This is done so that
unsafe scenarios (like passing PTR_TO_MEM where PTR_TO_BTF_ID of
in-kernel valid structure is expected, which may have pointers) are
avoided. Since the argument checking happens basd on argument register
type, it is not easy to ascertain what the expected type is. In the
future, support for PTR_TO_MEM for kfunc can be extended to serve other
usecases. The struct type whose pointer is passed in may have maximum
nesting depth of 4, all recursively composed of scalars or struct with
scalars.
Future commits will add negative tests that check whether these
restrictions imposed for kfunc arguments are duly rejected by BPF
verifier or not.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211217015031.1278167-4-memxor@gmail.com
|
|
Some helper functions may modify its arguments, for example,
bpf_d_path, bpf_get_stack etc. Previously, their argument types
were marked as ARG_PTR_TO_MEM, which is compatible with read-only
mem types, such as PTR_TO_RDONLY_BUF. Therefore it's legitimate,
but technically incorrect, to modify a read-only memory by passing
it into one of such helper functions.
This patch tags the bpf_args compatible with immutable memory with
MEM_RDONLY flag. The arguments that don't have this flag will be
only compatible with mutable memory types, preventing the helper
from modifying a read-only memory. The bpf_args that have
MEM_RDONLY are compatible with both mutable memory and immutable
memory.
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211217003152.48334-9-haoluo@google.com
|
|
Remove PTR_TO_MEM_OR_NULL and replace it with PTR_TO_MEM combined with
flag PTR_MAYBE_NULL.
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211217003152.48334-7-haoluo@google.com
|
|
This patch introduce a flag MEM_RDONLY to tag a reg value
pointing to read-only memory. It makes the following changes:
1. PTR_TO_RDWR_BUF -> PTR_TO_BUF
2. PTR_TO_RDONLY_BUF -> PTR_TO_BUF | MEM_RDONLY
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211217003152.48334-6-haoluo@google.com
|
|
We have introduced a new type to make bpf_reg composable, by
allocating bits in the type to represent flags.
One of the flags is PTR_MAYBE_NULL which indicates a pointer
may be NULL. This patch switches the qualified reg_types to
use this flag. The reg_types changed in this patch include:
1. PTR_TO_MAP_VALUE_OR_NULL
2. PTR_TO_SOCKET_OR_NULL
3. PTR_TO_SOCK_COMMON_OR_NULL
4. PTR_TO_TCP_SOCK_OR_NULL
5. PTR_TO_BTF_ID_OR_NULL
6. PTR_TO_MEM_OR_NULL
7. PTR_TO_RDONLY_BUF_OR_NULL
8. PTR_TO_RDWR_BUF_OR_NULL
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20211217003152.48334-5-haoluo@google.com
|
|
Adding support to access arguments with int pointer arguments
in tracing programs.
Currently we allow tracing programs to access only pointers to
string (char pointer), void pointers and pointers to structs.
If we try to access argument which is pointer to int, verifier
will fail to load the program with;
R1 type=ctx expected=fp
; int BPF_PROG(fmod_ret_test, int _a, __u64 _b, int _ret)
0: (bf) r6 = r1
; int BPF_PROG(fmod_ret_test, int _a, __u64 _b, int _ret)
1: (79) r9 = *(u64 *)(r6 +8)
func 'bpf_modify_return_test' arg1 type INT is not a struct
There is no harm for the program to access int pointer argument.
We are already doing that for string pointer, which is pointer
to int with 1 byte size.
Changing the is_string_ptr to generic integer check and renaming
it to btf_type_is_int.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211208193245.172141-2-jolsa@kernel.org
|
|
Coverity issued the following warning:
6685 cands = bpf_core_add_cands(cands, main_btf, 1);
6686 if (IS_ERR(cands))
>>> CID 1510300: (RETURN_LOCAL)
>>> Returning pointer "cands" which points to local variable "local_cand".
6687 return cands;
It's a false positive.
Add ERR_CAST() to silence it.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Eliminate the follow coccicheck warning:
./kernel/bpf/btf.c:6537:13-20: WARNING opportunity for kmemdup.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/1639030882-92383-1-git-send-email-jiapeng.chong@linux.alibaba.com
|
|
Andrii Nakryiko says:
====================
bpf-next 2021-12-10 v2
We've added 115 non-merge commits during the last 26 day(s) which contain
a total of 182 files changed, 5747 insertions(+), 2564 deletions(-).
The main changes are:
1) Various samples fixes, from Alexander Lobakin.
2) BPF CO-RE support in kernel and light skeleton, from Alexei Starovoitov.
3) A batch of new unified APIs for libbpf, logging improvements, version
querying, etc. Also a batch of old deprecations for old APIs and various
bug fixes, in preparation for libbpf 1.0, from Andrii Nakryiko.
4) BPF documentation reorganization and improvements, from Christoph Hellwig
and Dave Tucker.
5) Support for declarative initialization of BPF_MAP_TYPE_PROG_ARRAY in
libbpf, from Hengqi Chen.
6) Verifier log fixes, from Hou Tao.
7) Runtime-bounded loops support with bpf_loop() helper, from Joanne Koong.
8) Extend branch record capturing to all platforms that support it,
from Kajol Jain.
9) Light skeleton codegen improvements, from Kumar Kartikeya Dwivedi.
10) bpftool doc-generating script improvements, from Quentin Monnet.
11) Two libbpf v0.6 bug fixes, from Shuyi Cheng and Vincent Minet.
12) Deprecation warning fix for perf/bpf_counter, from Song Liu.
13) MAX_TAIL_CALL_CNT unification and MIPS build fix for libbpf,
from Tiezhu Yang.
14) BTF_KING_TYPE_TAG follow-up fixes, from Yonghong Song.
15) Selftests fixes and improvements, from Ilya Leoshkevich, Jean-Philippe
Brucker, Jiri Olsa, Maxim Mikityanskiy, Tirthendu Sarkar, Yucong Sun,
and others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (115 commits)
libbpf: Add "bool skipped" to struct bpf_map
libbpf: Fix typo in btf__dedup@LIBBPF_0.0.2 definition
bpftool: Switch bpf_object__load_xattr() to bpf_object__load()
selftests/bpf: Remove the only use of deprecated bpf_object__load_xattr()
selftests/bpf: Add test for libbpf's custom log_buf behavior
selftests/bpf: Replace all uses of bpf_load_btf() with bpf_btf_load()
libbpf: Deprecate bpf_object__load_xattr()
libbpf: Add per-program log buffer setter and getter
libbpf: Preserve kernel error code and remove kprobe prog type guessing
libbpf: Improve logging around BPF program loading
libbpf: Allow passing user log setting through bpf_object_open_opts
libbpf: Allow passing preallocated log_buf when loading BTF into kernel
libbpf: Add OPTS-based bpf_btf_load() API
libbpf: Fix bpf_prog_load() log_buf logic for log_level 0
samples/bpf: Remove unneeded variable
bpf: Remove redundant assignment to pointer t
selftests/bpf: Fix a compilation warning
perf/bpf_counter: Use bpf_map_create instead of bpf_create_map
samples: bpf: Fix 'unknown warning group' build warning on Clang
samples: bpf: Fix xdp_sample_user.o linking with Clang
...
====================
Link: https://lore.kernel.org/r/20211210234746.2100561-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The pointer t is being initialized with a value that is never read. The
pointer is re-assigned a value a littler later on, hence the initialization
is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211207224718.59593-1-colin.i.king@gmail.com
|
|
When CONFIG_DEBUG_INFO_BTF_MODULES is not set
the following warning can be seen:
kernel/bpf/btf.c:6588:13: warning: 'purge_cand_cache' defined but not used [-Wunused-function]
Fix it.
Fixes: 1e89106da253 ("bpf: Add bpf_core_add_cands() and wire it into bpf_core_apply_relo_insn().")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211207014839.6976-1-alexei.starovoitov@gmail.com
|
|
BPF_LOG_KERNEL is only used internally, so disallow bpf_btf_load()
to set log level as BPF_LOG_KERNEL. The same checking has already
been done in bpf_check(), so factor out a helper to check the
validity of log attributes and use it in both places.
Fixes: 8580ac9404f6 ("bpf: Process in-kernel BTF")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20211203053001.740945-1-houtao1@huawei.com
|
|
Reduce bpf_core_apply_relo_insn() stack usage and bump
BPF_CORE_SPEC_MAX_LEN limit back to 64.
Fixes: 29db4bea1d10 ("bpf: Prepare relo_core.c for kernel duty.")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211203182836.16646-1-alexei.starovoitov@gmail.com
|
|
When module registering its set is built-in, THIS_MODULE will be NULL,
hence we cannot return early in case owner is NULL.
Fixes: 14f267d95fe4 ("bpf: btf: Introduce helpers for dynamic BTF set registration")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211122144742.477787-3-memxor@gmail.com
|
|
Vinicius Costa Gomes reported [0] that build fails when
CONFIG_DEBUG_INFO_BTF is enabled and CONFIG_BPF_SYSCALL is disabled.
This leads to btf.c not being compiled, and then no symbol being present
in vmlinux for the declarations in btf.h. Since BTF is not useful
without enabling BPF subsystem, disallow this combination.
However, theoretically disabling both now could still fail, as the
symbol for kfunc_btf_id_list variables is not available. This isn't a
problem as the compiler usually optimizes the whole register/unregister
call, but at lower optimization levels it can fail the build in linking
stage.
Fix that by adding dummy variables so that modules taking address of
them still work, but the whole thing is a noop.
[0]: https://lore.kernel.org/bpf/20211110205418.332403-1-vinicius.gomes@intel.com
Fixes: 14f267d95fe4 ("bpf: btf: Introduce helpers for dynamic BTF set registration")
Reported-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211122144742.477787-2-memxor@gmail.com
|
|
Given BPF program's BTF root type name perform the following steps:
. search in vmlinux candidate cache.
. if (present in cache and candidate list >= 1) return candidate list.
. do a linear search through kernel BTFs for possible candidates.
. regardless of number of candidates found populate vmlinux cache.
. if (candidate list >= 1) return candidate list.
. search in module candidate cache.
. if (present in cache) return candidate list (even if list is empty).
. do a linear search through BTFs of all kernel modules
collecting candidates from all of them.
. regardless of number of candidates found populate module cache.
. return candidate list.
Then wire the result into bpf_core_apply_relo_insn().
When BPF program is trying to CO-RE relocate a type
that doesn't exist in either vmlinux BTF or in modules BTFs
these steps will perform 2 cache lookups when cache is hit.
Note the cache doesn't prevent the abuse by the program that might
have lots of relocations that cannot be resolved. Hence cond_resched().
CO-RE in the kernel requires CAP_BPF, since BTF loading requires it.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211201181040.23337-9-alexei.starovoitov@gmail.com
|
|
Make BTF log size limit to be the same as the verifier log size limit.
Otherwise tools that progressively increase log size and use the same log
for BTF loading and program loading will be hitting hard to debug EINVAL.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211201181040.23337-7-alexei.starovoitov@gmail.com
|
|
struct bpf_core_relo is generated by llvm and processed by libbpf.
It's a de-facto uapi.
With CO-RE in the kernel the struct bpf_core_relo becomes uapi de-jure.
Add an ability to pass a set of 'struct bpf_core_relo' to prog_load command
and let the kernel perform CO-RE relocations.
Note the struct bpf_line_info and struct bpf_func_info have the same
layout when passed from LLVM to libbpf and from libbpf to the kernel
except "insn_off" fields means "byte offset" when LLVM generates it.
Then libbpf converts it to "insn index" to pass to the kernel.
The struct bpf_core_relo's "insn_off" field is always "byte offset".
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211201181040.23337-6-alexei.starovoitov@gmail.com
|
|
Make relo_core.c to be compiled for the kernel and for user space libbpf.
Note the patch is reducing BPF_CORE_SPEC_MAX_LEN from 64 to 32.
This is the maximum number of nested structs and arrays.
For example:
struct sample {
int a;
struct {
int b[10];
};
};
struct sample *s = ...;
int *y = &s->b[5];
This field access is encoded as "0:1:0:5" and spec len is 4.
The follow up patch might bump it back to 64.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211201181040.23337-4-alexei.starovoitov@gmail.com
|
|
Rename btf_member_bit_offset() and btf_member_bitfield_size() to
avoid conflicts with similarly named helpers in libbpf's btf.h.
Rename the kernel helpers, since libbpf helpers are part of uapi.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211201181040.23337-3-alexei.starovoitov@gmail.com
|
|
Similar to btf_sock_ids, btf_tracing_ids provides btf ID for task_struct,
file, and vm_area_struct via easy to understand format like
btf_tracing_ids[BTF_TRACING_TYPE_[TASK|file|VMA]].
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211112150243.1270987-3-songliubraving@fb.com
|
|
syzbot reported the following BUG w/o CONFIG_DEBUG_INFO_BTF
BUG: KASAN: global-out-of-bounds in task_iter_init+0x212/0x2e7 kernel/bpf/task_iter.c:661
Read of size 4 at addr ffffffff90297404 by task swapper/0/1
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.15.0-syzkaller #0
Hardware name: ... Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description.constprop.0.cold+0xf/0x309 mm/kasan/report.c:256
__kasan_report mm/kasan/report.c:442 [inline]
kasan_report.cold+0x83/0xdf mm/kasan/report.c:459
task_iter_init+0x212/0x2e7 kernel/bpf/task_iter.c:661
do_one_initcall+0x103/0x650 init/main.c:1295
do_initcall_level init/main.c:1368 [inline]
do_initcalls init/main.c:1384 [inline]
do_basic_setup init/main.c:1403 [inline]
kernel_init_freeable+0x6b1/0x73a init/main.c:1606
kernel_init+0x1a/0x1d0 init/main.c:1497
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>
This is caused by hard-coded name[1] in BTF_ID_LIST_GLOBAL (w/o
CONFIG_DEBUG_INFO_BTF). Fix this by adding a parameter n to
BTF_ID_LIST_GLOBAL. This avoids ifdef CONFIG_DEBUG_INFO_BTF in btf.c and
filter.c.
Fixes: 7c7e3d31e785 ("bpf: Introduce helper bpf_find_vma")
Reported-by: syzbot+e0d81ec552a21d9071aa@syzkaller.appspotmail.com
Reported-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211112150243.1270987-2-songliubraving@fb.com
|
|
LLVM patches ([1] for clang, [2] and [3] for BPF backend)
added support for btf_type_tag attributes. This patch
added support for the kernel.
The main motivation for btf_type_tag is to bring kernel
annotations __user, __rcu etc. to btf. With such information
available in btf, bpf verifier can detect mis-usages
and reject the program. For example, for __user tagged pointer,
developers can then use proper helper like bpf_probe_read_user()
etc. to read the data.
BTF_KIND_TYPE_TAG may also useful for other tracing
facility where instead of to require user to specify
kernel/user address type, the kernel can detect it
by itself with btf.
[1] https://reviews.llvm.org/D111199
[2] https://reviews.llvm.org/D113222
[3] https://reviews.llvm.org/D113496
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211112012609.1505032-1-yhs@fb.com
|
|
In some profiler use cases, it is necessary to map an address to the
backing file, e.g., a shared library. bpf_find_vma helper provides a
flexible way to achieve this. bpf_find_vma maps an address of a task to
the vma (vm_area_struct) for this address, and feed the vma to an callback
BPF function. The callback function is necessary here, as we need to
ensure mmap_sem is unlocked.
It is necessary to lock mmap_sem for find_vma. To lock and unlock mmap_sem
safely when irqs are disable, we use the same mechanism as stackmap with
build_id. Specifically, when irqs are disabled, the unlocked is postponed
in an irq_work. Refactor stackmap.c so that the irq_work is shared among
bpf_find_vma and stackmap helpers.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Hengqi Chen <hengqi.chen@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211105232330.1936330-2-songliubraving@fb.com
|
|
The llvm patches ([1], [2]) added support to attach btf_decl_tag
attributes to typedef declarations. This patch added
support in kernel.
[1] https://reviews.llvm.org/D110127
[2] https://reviews.llvm.org/D112259
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211021195628.4018847-1-yhs@fb.com
|
