| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fix from Tejun Heo:
"Just one patch to revert commit ca10d851b9ad ("workqueue: Override
implicit ordered attribute in workqueue_apply_unbound_cpumask()").
This commit could break ordering guarantees for ordered workqueues.
The problem that the commit tried to resolve partially - making
ordered workqueues follow unbound cpumask - is fully solved in
wq/for-6.9 branch"
* tag 'wq-for-6.8-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
Revert "workqueue: Override implicit ordered attribute in workqueue_apply_unbound_cpumask()"
|
|
set_memory_ro(), set_memory_nx(), set_memory_x() and other helpers
can fail and return an error. In that case the memory might not be
protected as expected and the module loading has to be aborted to
avoid security issues.
Check return value of all calls to set_memory_XX() and handle
error if any.
Add a check to not call set_memory_XX() on NULL pointers as some
architectures may not like it allthough numpages is always 0 in that
case. This also avoid a useless call to set_vm_flush_reset_perms().
Link: https://github.com/KSPP/linux/issues/7
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix the #ifndef that didn't have the 'CONFIG_' prefix on
HAVE_DYNAMIC_FTRACE_WITH_REGS
The fix to have dynamic trampolines work with x86 broke arm64 as the
config used in the #ifdef was HAVE_DYNAMIC_FTRACE_WITH_REGS and not
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS which removed the fix that the
previous fix was to fix.
- Fix tracing_on state
The code to test if "tracing_on" is set incorrectly used
ring_buffer_record_is_on() which returns false if the ring buffer
isn't able to be written to.
But the ring buffer disable has several bits that disable it. One is
internal disabling which is used for resizing and other modifications
of the ring buffer. But the "tracing_on" user space visible flag
should only report if tracing is actually on and not internally
disabled, as this can cause confusion as writing "1" when it is
disabled will not enable it.
Instead use ring_buffer_record_is_set_on() which shows the user space
visible settings.
- Fix a false positive kmemleak on saved cmdlines
Now that the saved_cmdlines structure is allocated via alloc_page()
and not via kmalloc() it has become invisible to kmemleak. The
allocation done to one of its pointers was flagged as a dangling
allocation leak. Make kmemleak aware of this allocation and free.
- Fix synthetic event dynamic strings
An update that cleaned up the synthetic event code removed the return
value of trace_string(), and had it return zero instead of the
length, causing dynamic strings in the synthetic event to always have
zero size.
- Clean up documentation and header files for seq_buf
* tag 'trace-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
seq_buf: Fix kernel documentation
seq_buf: Don't use "proxy" headers
tracing/synthetic: Fix trace_string() return value
tracing: Inform kmemleak of saved_cmdlines allocation
tracing: Use ring_buffer_record_is_set_on() in tracer_tracing_is_on()
tracing: Fix HAVE_DYNAMIC_FTRACE_WITH_REGS ifdef
|
|
2f34d7337d98 ("workqueue: Fix queue_work_on() with BH workqueues") added
irq_work usage to workqueue; however, it turns out irq_work is actually
optional and the change breaks build on configuration which doesn't have
CONFIG_IRQ_WORK enabled.
Fix build by making workqueue use irq_work only when CONFIG_SMP and enabling
CONFIG_IRQ_WORK when CONFIG_SMP is set. It's reasonable to argue that it may
be better to just always enable it. However, this still saves a small bit of
memory for tiny UP configs and also the least amount of change, so, for now,
let's keep it conditional.
Verified to do the right thing for x86_64 allnoconfig and defconfig, and
aarch64 allnoconfig, allnoconfig + prink disable (SMP but nothing selects
IRQ_WORK) and a modified aarch64 Kconfig where !SMP and nothing selects
IRQ_WORK.
v2: `depends on SMP` leads to Kconfig warnings when CONFIG_IRQ_WORK is
selected by something else when !CONFIG_SMP. Use `def_bool y if SMP`
instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Fixes: 2f34d7337d98 ("workqueue: Fix queue_work_on() with BH workqueues")
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
|
|
There's a few cases of nested #ifdefs in the scheduler code
that can be simplified:
#ifdef DEFINE_A
...code block...
#ifdef DEFINE_A <-- This is a duplicate.
...code block...
#endif
#else
#ifndef DEFINE_A <-- This is also duplicate.
...code block...
#endif
#endif
More details about the script and methods used to find these code
patterns can be found at:
https://lore.kernel.org/all/20240118080326.13137-1-sshegde@linux.ibm.com/
No change in functionality intended.
[ mingo: Clarified the changelog. ]
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20240216061433.535522-1-sshegde@linux.ibm.com
|
|
The debug.config file is really great to easily enable a bunch of
general debugging features on a CI-like setup. But it would be great to
also include core networking debugging config.
A few CI's validating features from the Net tree also enable a few other
debugging options on top of debug.config. A small selection is quite
generic for the whole net tree. They validate some assumptions in
different parts of the core net tree. As suggested by Jakub Kicinski in
[1], having them added to this debug.config file would help other CIs
using network features to find bugs in this area.
Note that the two REFCNT configs also select REF_TRACKER, which doesn't
seem to be an issue.
Link: https://lore.kernel.org/netdev/20240202093148.33bd2b14@kernel.org/T/ [1]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240212-kconfig-debug-enable-net-v1-1-fb026de8174c@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
net/core/dev.c
9f30831390ed ("net: add rcu safety to rtnl_prop_list_size()")
723de3ebef03 ("net: free altname using an RCU callback")
net/unix/garbage.c
11498715f266 ("af_unix: Remove io_uring code for GC.")
25236c91b5ab ("af_unix: Fix task hung while purging oob_skb in GC.")
drivers/net/ethernet/renesas/ravb_main.c
ed4adc07207d ("net: ravb: Count packets instead of descriptors in GbEth RX path"
)
c2da9408579d ("ravb: Add Rx checksum offload support for GbEth")
net/mptcp/protocol.c
bdd70eb68913 ("mptcp: drop the push_pending field")
28e5c1380506 ("mptcp: annotate lockless accesses around read-mostly fields")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With latest llvm19, I hit the following selftest failures with
$ ./test_progs -j
libbpf: prog 'on_event': BPF program load failed: Permission denied
libbpf: prog 'on_event': -- BEGIN PROG LOAD LOG --
combined stack size of 4 calls is 544. Too large
verification time 1344153 usec
stack depth 24+440+0+32
processed 51008 insns (limit 1000000) max_states_per_insn 19 total_states 1467 peak_states 303 mark_read 146
-- END PROG LOAD LOG --
libbpf: prog 'on_event': failed to load: -13
libbpf: failed to load object 'strobemeta_subprogs.bpf.o'
scale_test:FAIL:expect_success unexpected error: -13 (errno 13)
#498 verif_scale_strobemeta_subprogs:FAIL
The verifier complains too big of the combined stack size (544 bytes) which
exceeds the maximum stack limit 512. This is a regression from llvm19 ([1]).
In the above error log, the original stack depth is 24+440+0+32.
To satisfy interpreter's need, in verifier the stack depth is adjusted to
32+448+32+32=544 which exceeds 512, hence the error. The same adjusted
stack size is also used for jit case.
But the jitted codes could use smaller stack size.
$ egrep -r stack_depth | grep round_up
arm64/net/bpf_jit_comp.c: ctx->stack_size = round_up(prog->aux->stack_depth, 16);
loongarch/net/bpf_jit.c: bpf_stack_adjust = round_up(ctx->prog->aux->stack_depth, 16);
powerpc/net/bpf_jit_comp.c: cgctx.stack_size = round_up(fp->aux->stack_depth, 16);
riscv/net/bpf_jit_comp32.c: round_up(ctx->prog->aux->stack_depth, STACK_ALIGN);
riscv/net/bpf_jit_comp64.c: bpf_stack_adjust = round_up(ctx->prog->aux->stack_depth, 16);
s390/net/bpf_jit_comp.c: u32 stack_depth = round_up(fp->aux->stack_depth, 8);
sparc/net/bpf_jit_comp_64.c: stack_needed += round_up(stack_depth, 16);
x86/net/bpf_jit_comp.c: EMIT3_off32(0x48, 0x81, 0xEC, round_up(stack_depth, 8));
x86/net/bpf_jit_comp.c: int tcc_off = -4 - round_up(stack_depth, 8);
x86/net/bpf_jit_comp.c: round_up(stack_depth, 8));
x86/net/bpf_jit_comp.c: int tcc_off = -4 - round_up(stack_depth, 8);
x86/net/bpf_jit_comp.c: EMIT3_off32(0x48, 0x81, 0xC4, round_up(stack_depth, 8));
In the above, STACK_ALIGN in riscv/net/bpf_jit_comp32.c is defined as 16.
So stack is aligned in either 8 or 16, x86/s390 having 8-byte stack alignment and
the rest having 16-byte alignment.
This patch calculates total stack depth based on 16-byte alignment if jit is requested.
For the above failing case, the new stack size will be 32+448+0+32=512 and no verification
failure. llvm19 regression will be discussed separately in llvm upstream.
The verifier change caused three test failures as these tests compared messages
with stack size. More specifically,
- test_global_funcs/global_func1: fail with interpreter mode and success with jit mode.
Adjusted stack sizes so both jit and interpreter modes will fail.
- async_stack_depth/{pseudo_call_check, async_call_root_check}: since jit and interpreter
will calculate different stack sizes, the failure msg is adjusted to omit those
specific stack size numbers.
[1] https://lore.kernel.org/bpf/32bde0f0-1881-46c9-931a-673be566c61d@linux.dev/
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240214232951.4113094-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Verifier log avoids printing the same source code line multiple times
when a consecutive block of BPF assembly instructions are covered by the
same original (C) source code line. This greatly improves verifier log
legibility.
Unfortunately, this check is imperfect and in production applications it
quite often happens that verifier log will have multiple duplicated
source lines emitted, for no apparently good reason. E.g., this is
excerpt from a real-world BPF application (with register states omitted
for clarity):
BEFORE
======
; for (int i = 0; i < STROBE_MAX_MAP_ENTRIES; ++i) { @ strobemeta_probe.bpf.c:394
5369: (07) r8 += 2 ;
5370: (07) r7 += 16 ;
; for (int i = 0; i < STROBE_MAX_MAP_ENTRIES; ++i) { @ strobemeta_probe.bpf.c:394
5371: (07) r9 += 1 ;
5372: (79) r4 = *(u64 *)(r10 -32) ;
; for (int i = 0; i < STROBE_MAX_MAP_ENTRIES; ++i) { @ strobemeta_probe.bpf.c:394
5373: (55) if r9 != 0xf goto pc+2
; if (i >= map->cnt) @ strobemeta_probe.bpf.c:396
5376: (79) r1 = *(u64 *)(r10 -40) ;
5377: (79) r1 = *(u64 *)(r1 +8) ;
; if (i >= map->cnt) @ strobemeta_probe.bpf.c:396
5378: (dd) if r1 s<= r9 goto pc-5 ;
; descr->key_lens[i] = 0; @ strobemeta_probe.bpf.c:398
5379: (b4) w1 = 0 ;
5380: (6b) *(u16 *)(r8 -30) = r1 ;
; task, data, off, STROBE_MAX_STR_LEN, map->entries[i].key); @ strobemeta_probe.bpf.c:400
5381: (79) r3 = *(u64 *)(r7 -8) ;
5382: (7b) *(u64 *)(r10 -24) = r6 ;
; task, data, off, STROBE_MAX_STR_LEN, map->entries[i].key); @ strobemeta_probe.bpf.c:400
5383: (bc) w6 = w6 ;
; barrier_var(payload_off); @ strobemeta_probe.bpf.c:280
5384: (bf) r2 = r6 ;
5385: (bf) r1 = r4 ;
As can be seen, line 394 is emitted thrice, 396 is emitted twice, and
line 400 is duplicated as well. Note that there are no intermingling
other lines of source code in between these duplicates, so the issue is
not compiler reordering assembly instruction such that multiple original
source code lines are in effect.
It becomes more obvious what's going on if we look at *full* original line info
information (using btfdump for this, [0]):
#2764: line: insn #5363 --> 394:3 @ ./././strobemeta_probe.bpf.c
for (int i = 0; i < STROBE_MAX_MAP_ENTRIES; ++i) {
#2765: line: insn #5373 --> 394:21 @ ./././strobemeta_probe.bpf.c
for (int i = 0; i < STROBE_MAX_MAP_ENTRIES; ++i) {
#2766: line: insn #5375 --> 394:47 @ ./././strobemeta_probe.bpf.c
for (int i = 0; i < STROBE_MAX_MAP_ENTRIES; ++i) {
#2767: line: insn #5377 --> 394:3 @ ./././strobemeta_probe.bpf.c
for (int i = 0; i < STROBE_MAX_MAP_ENTRIES; ++i) {
#2768: line: insn #5378 --> 414:10 @ ./././strobemeta_probe.bpf.c
return off;
We can see that there are four line info records covering
instructions #5363 through #5377 (instruction indices are shifted due to
subprog instruction being appended to main program), all of them are
pointing to the same C source code line #394. But each of them points to
a different part of that line, which is denoted by differing column
numbers (3, 21, 47, 3).
But verifier log doesn't distinguish between parts of the same source code line
and doesn't emit this column number information, so for end user it's just a
repetitive visual noise. So let's improve the detection of repeated source code
line and avoid this.
With the changes in this patch, we get this output for the same piece of BPF
program log:
AFTER
=====
; for (int i = 0; i < STROBE_MAX_MAP_ENTRIES; ++i) { @ strobemeta_probe.bpf.c:394
5369: (07) r8 += 2 ;
5370: (07) r7 += 16 ;
5371: (07) r9 += 1 ;
5372: (79) r4 = *(u64 *)(r10 -32) ;
5373: (55) if r9 != 0xf goto pc+2
; if (i >= map->cnt) @ strobemeta_probe.bpf.c:396
5376: (79) r1 = *(u64 *)(r10 -40) ;
5377: (79) r1 = *(u64 *)(r1 +8) ;
5378: (dd) if r1 s<= r9 goto pc-5 ;
; descr->key_lens[i] = 0; @ strobemeta_probe.bpf.c:398
5379: (b4) w1 = 0 ;
5380: (6b) *(u16 *)(r8 -30) = r1 ;
; task, data, off, STROBE_MAX_STR_LEN, map->entries[i].key); @ strobemeta_probe.bpf.c:400
5381: (79) r3 = *(u64 *)(r7 -8) ;
5382: (7b) *(u64 *)(r10 -24) = r6 ;
5383: (bc) w6 = w6 ;
; barrier_var(payload_off); @ strobemeta_probe.bpf.c:280
5384: (bf) r2 = r6 ;
5385: (bf) r1 = r4 ;
All the duplication is gone and the log is cleaner and less distracting.
[0] https://github.com/anakryiko/btfdump
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240214174100.2847419-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Some platform-MSI implementations require that power management is
redirected to the underlying interrupt chip device. To make this work
with per device MSI domains provide a new feature flag and let the
core code handle the setup of dev->pm_dev when set during device MSI
domain creation.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240127161753.114685-14-apatel@ventanamicro.com
|
|
Reroute interrupt allocation in irq_create_fwspec_mapping() if the domain
is a MSI device domain. This is required to convert the support for wire
to MSI bridges to per device MSI domains.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240127161753.114685-13-apatel@ventanamicro.com
|
|
To support wire to MSI bridges proper in the MSI core infrastructure it is
required to have separate allocation/free interfaces which can be invoked
from the regular irqdomain allocaton/free functions.
The mechanism for allocation is:
- Allocate the next free MSI descriptor index in the domain
- Store the hardware interrupt number and the trigger type
which was extracted by the irqdomain core from the firmware spec
in the MSI descriptor device cookie so it can be retrieved by
the underlying interrupt domain and interrupt chip
- Use the regular MSI allocation mechanism for the newly allocated
index which returns a fully initialized Linux interrupt on succes
This works because:
- the domains have a fixed size
- each hardware interrupt is only allocated once
- the underlying domain does not care about the MSI index it only cares
about the hardware interrupt number and the trigger type
The free function looks up the MSI index in the MSI descriptor of the
provided Linux interrupt number and uses the regular index based free
functions of the MSI core.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240127161753.114685-12-apatel@ventanamicro.com
|
|
To support wire to MSI domains via the MSI infrastructure it is required to
use the firmware node of the device which implements this for creating the
MSI domain. Otherwise the existing firmware match mechanisms to find the
correct irqdomain for a wired interrupt which is connected to a wire to MSI
bridge would fail.
This cannot be used for the general case because not all devices provide
firmware nodes and all regular per device MSI domains are directly
associated to the device and have not be searched for.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240127161753.114685-11-apatel@ventanamicro.com
|
|
In preparation for providing a special allocation function for wired
interrupts which are connected to a wire to MSI bridge, split the inner
workings of msi_domain_alloc_irq_at() out into a helper function so the
code can be shared.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240127161753.114685-9-apatel@ventanamicro.com
|
|
irq_create_fwspec_mapping() requires translation of the firmware spec to a
hardware interrupt number and the trigger type information.
Wired interrupts which are connected to a wire to MSI bridge, like MBIGEN
are allocated that way. So far MBIGEN provides a regular irqdomain which
then hooks backwards into the MSI infrastructure. That's an unholy mess and
will be replaced with per device MSI domains which are regular MSI domains.
Interrupts on MSI domains are not supported by irq_create_fwspec_mapping(),
but for making the wire to MSI bridges sane it makes sense to provide a
special allocation/free interface in the MSI infrastructure. That avoids
the backdoors into the core MSI allocation code and just shares all the
regular MSI infrastructure.
Provide an optional translation callback in msi_domain_ops which can be
utilized by these wire to MSI bridges. No other MSI domain should provide a
translation callback. The default translation callback of the MSI
irqdomains will warn when it is invoked on a non-prepared MSI domain.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240127161753.114685-8-apatel@ventanamicro.com
|
|
Now that the GIC-v3 callback can handle invocation with a fwspec parameter
count of 0 lift the restriction in the core code and invoke select()
unconditionally when the domain provides it.
Preparatory change for per device MSI domains.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240127161753.114685-3-apatel@ventanamicro.com
|
|
Fix trace_string() by assigning the string length to the return variable
which got lost in commit ddeea494a16f ("tracing/synthetic: Use union
instead of casts") and caused trace_string() to always return 0.
Link: https://lore.kernel.org/linux-trace-kernel/20240214220555.711598-1-thorsten.blum@toblux.com
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: ddeea494a16f ("tracing/synthetic: Use union instead of casts")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
RISC-V uses xRET instructions on return from interrupt and to go back
to user-space; the xRET instruction is not core serializing.
Use FENCE.I for providing core serialization as follows:
- by calling sync_core_before_usermode() on return from interrupt (cf.
ipi_sync_core()),
- via switch_mm() and sync_core_before_usermode() (respectively, for
uthread->uthread and kthread->uthread transitions) before returning
to user-space.
On RISC-V, the serialization in switch_mm() is activated by resetting
the icache_stale_mask of the mm at prepare_sync_core_cmd().
Suggested-by: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/r/20240131144936.29190-5-parri.andrea@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Introduce an architecture function that architectures can use to set
up ("prepare") SYNC_CORE commands.
The function will be used by RISC-V to update its "deferred icache-
flush" data structures (icache_stale_mask).
Architectures defining prepare_sync_core_cmd() static inline need to
select ARCH_HAS_PREPARE_SYNC_CORE_CMD.
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/r/20240131144936.29190-4-parri.andrea@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
To gather the architecture requirements of the "private/global
expedited" membarrier commands. The file will be expanded to
integrate further information about the membarrier syscall (as
needed/desired in the future). While at it, amend some related
inline comments in the membarrier codebase.
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/r/20240131144936.29190-3-parri.andrea@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The membarrier system call requires a full memory barrier after storing
to rq->curr, before going back to user-space. The barrier is only
needed when switching between processes: the barrier is implied by
mmdrop() when switching from kernel to userspace, and it's not needed
when switching from userspace to kernel.
Rely on the feature/mechanism ARCH_HAS_MEMBARRIER_CALLBACKS and on the
primitive membarrier_arch_switch_mm(), already adopted by the PowerPC
architecture, to insert the required barrier.
Fixes: fab957c11efe2f ("RISC-V: Atomic and Locking Code")
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/r/20240131144936.29190-2-parri.andrea@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Real-world BPF applications keep growing in size. Medium-sized production
application can easily have 50K+ verified instructions, and its line
info section in .BTF.ext has more than 3K entries.
When verifier emits log with log_level>=1, it annotates assembly code
with matched original C source code. Currently it uses linear search
over line info records to find a match. As complexity of BPF
applications grows, this O(K * N) approach scales poorly.
So, let's instead of linear O(N) search for line info record use faster
equivalent O(log(N)) binary search algorithm. It's not a plain binary
search, as we don't look for exact match. It's an upper bound search
variant, looking for rightmost line info record that starts at or before
given insn_off.
Some unscientific measurements were done before and after this change.
They were done in VM and fluctuate a bit, but overall the speed up is
undeniable.
BASELINE
========
File Program Duration (us) Insns
-------------------------------- ---------------- ------------- ------
katran.bpf.o balancer_ingress 2497130 343552
pyperf600.bpf.linked3.o on_event 12389611 627288
strobelight_pyperf_libbpf.o on_py_event 387399 52445
-------------------------------- ---------------- ------------- ------
BINARY SEARCH
=============
File Program Duration (us) Insns
-------------------------------- ---------------- ------------- ------
katran.bpf.o balancer_ingress 2339312 343552
pyperf600.bpf.linked3.o on_event 5602203 627288
strobelight_pyperf_libbpf.o on_py_event 294761 52445
-------------------------------- ---------------- ------------- ------
While Katran's speed up is pretty modest (about 105ms, or 6%), for
production pyperf BPF program (on_py_event) it's much greater already,
going from 387ms down to 295ms (23% improvement).
Looking at BPF selftests's biggest pyperf example, we can see even more
dramatic improvement, shaving more than 50% of time, going from 12.3s
down to 5.6s.
Different amount of improvement is the function of overall amount of BPF
assembly instructions in .bpf.o files (which contributes to how much
line info records there will be and thus, on average, how much time linear
search will take), among other things:
$ llvm-objdump -d katran.bpf.o | wc -l
3863
$ llvm-objdump -d strobelight_pyperf_libbpf.o | wc -l
6997
$ llvm-objdump -d pyperf600.bpf.linked3.o | wc -l
87854
Granted, this only applies to debugging cases (e.g., using veristat, or
failing verification in production), but seems worth doing to improve
overall developer experience anyways.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240214002311.2197116-1-andrii@kernel.org
|
|
When queue_work_on() is used to queue a BH work item on a remote CPU, the
work item is queued on that CPU but kick_pool() raises softirq on the local
CPU. This leads to stalls as the work item won't be executed until something
else on the remote CPU schedules a BH work item or tasklet locally.
Fix it by bouncing raising softirq to the target CPU using per-cpu irq_work.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 4cb1ef64609f ("workqueue: Implement BH workqueues to eventually replace tasklets")
|
|
The allocation of the struct saved_cmdlines_buffer structure changed from:
s = kmalloc(sizeof(*s), GFP_KERNEL);
s->saved_cmdlines = kmalloc_array(TASK_COMM_LEN, val, GFP_KERNEL);
to:
orig_size = sizeof(*s) + val * TASK_COMM_LEN;
order = get_order(orig_size);
size = 1 << (order + PAGE_SHIFT);
page = alloc_pages(GFP_KERNEL, order);
if (!page)
return NULL;
s = page_address(page);
memset(s, 0, sizeof(*s));
s->saved_cmdlines = kmalloc_array(TASK_COMM_LEN, val, GFP_KERNEL);
Where that s->saved_cmdlines allocation looks to be a dangling allocation
to kmemleak. That's because kmemleak only keeps track of kmalloc()
allocations. For allocations that use page_alloc() directly, the kmemleak
needs to be explicitly informed about it.
Add kmemleak_alloc() and kmemleak_free() around the page allocation so
that it doesn't give the following false positive:
unreferenced object 0xffff8881010c8000 (size 32760):
comm "swapper", pid 0, jiffies 4294667296
hex dump (first 32 bytes):
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
backtrace (crc ae6ec1b9):
[<ffffffff86722405>] kmemleak_alloc+0x45/0x80
[<ffffffff8414028d>] __kmalloc_large_node+0x10d/0x190
[<ffffffff84146ab1>] __kmalloc+0x3b1/0x4c0
[<ffffffff83ed7103>] allocate_cmdlines_buffer+0x113/0x230
[<ffffffff88649c34>] tracer_alloc_buffers.isra.0+0x124/0x460
[<ffffffff8864a174>] early_trace_init+0x14/0xa0
[<ffffffff885dd5ae>] start_kernel+0x12e/0x3c0
[<ffffffff885f5758>] x86_64_start_reservations+0x18/0x30
[<ffffffff885f582b>] x86_64_start_kernel+0x7b/0x80
[<ffffffff83a001c3>] secondary_startup_64_no_verify+0x15e/0x16b
Link: https://lore.kernel.org/linux-trace-kernel/87r0hfnr9r.fsf@kernel.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240214112046.09a322d6@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 44dc5c41b5b1 ("tracing: Fix wasted memory in saved_cmdlines logic")
Reported-by: Kalle Valo <kvalo@kernel.org>
Tested-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
With commit '6a010a49b63a ("cgroup: Make !percpu threadgroup_rwsem
operations optional")' usage of rcu_sync_enter_start is removed.
So this function can also be removed.
In the words of Oleg Nesterov:
__rcu_sync_enter(wait => false) is a better alternative if
someone needs rcu_sync_enter_start() again.
Link: https://lore.kernel.org/all/20220725121208.GB28662@redhat.com/
Signed-off-by: Onkarnath <onkarnath.1@samsung.com>
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
Currently, if rcu_torture_writer() sees fewer than ten grace periods
having elapsed during a call to stutter_wait() that actually waited,
the rtort_pipe_count warning is emitted. This has worked well for
a long time. Except that the rcutorture TREE07 scenario now does a
short-term 14-second RCU CPU stall, which can most definitely case
false-positive rtort_pipe_count warnings.
This commit therefore changes rcu_torture_writer() to compute the
full expected holdoff and stall duration, and to refuse to report any
rtort_pipe_count warnings until after all stalls have completed.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
The comments added in commit 1ef990c4b36b ("srcu: No need to
advance/accelerate if no callback enqueued") are a bit confusing.
The comments are describing a scenario for code that was moved and is
no longer the way it was (snapshot after advancing). Improve the code
comments to reflect this and also document why acceleration can never
fail.
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <neeraj.iitr10@gmail.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
To allow more flexible arrangements while still provide a single kernel
for distros, provide a boot time parameter to enable/disable lazy RCU.
Specify:
rcutree.enable_rcu_lazy=[y|1|n|0]
Which also requires
rcu_nocbs=all
at boot time to enable/disable lazy RCU.
To disable it by default at build time when CONFIG_RCU_LAZY=y, the new
CONFIG_RCU_LAZY_DEFAULT_OFF can be used.
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Tested-by: Andrea Righi <andrea.righi@canonical.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
The variable name jiffies_till_flush is too generic and therefore:
* It may shadow a global variable
* It doesn't tell on what it operates
Make the name more precise, along with the related APIs.
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
Document the "state" parameter of both of these functions.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312041922.YZCcEPYD-lkp@intel.com/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
TREE04 running on short iterations can produce writer stalls of the
following kind:
??? Writer stall state RTWS_EXP_SYNC(4) g3968 f0x0 ->state 0x2 cpu 0
task:rcu_torture_wri state:D stack:14568 pid:83 ppid:2 flags:0x00004000
Call Trace:
<TASK>
__schedule+0x2de/0x850
? trace_event_raw_event_rcu_exp_funnel_lock+0x6d/0xb0
schedule+0x4f/0x90
synchronize_rcu_expedited+0x430/0x670
? __pfx_autoremove_wake_function+0x10/0x10
? __pfx_synchronize_rcu_expedited+0x10/0x10
do_rtws_sync.constprop.0+0xde/0x230
rcu_torture_writer+0x4b4/0xcd0
? __pfx_rcu_torture_writer+0x10/0x10
kthread+0xc7/0xf0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2f/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
Waiting for an expedited grace period and polling for an expedited
grace period both are operations that internally rely on the same
workqueue performing necessary asynchronous work.
However, a dependency chain is involved between those two operations,
as depicted below:
====== CPU 0 ======= ====== CPU 1 =======
synchronize_rcu_expedited()
exp_funnel_lock()
mutex_lock(&rcu_state.exp_mutex);
start_poll_synchronize_rcu_expedited
queue_work(rcu_gp_wq, &rnp->exp_poll_wq);
synchronize_rcu_expedited_queue_work()
queue_work(rcu_gp_wq, &rew->rew_work);
wait_event() // A, wait for &rew->rew_work completion
mutex_unlock() // B
//======> switch to kworker
sync_rcu_do_polled_gp() {
synchronize_rcu_expedited()
exp_funnel_lock()
mutex_lock(&rcu_state.exp_mutex); // C, wait B
....
} // D
Since workqueues are usually implemented on top of several kworkers
handling the queue concurrently, the above situation wouldn't deadlock
most of the time because A then doesn't depend on D. But in case of
memory stress, a single kworker may end up handling alone all the works
in a serialized way. In that case the above layout becomes a problem
because A then waits for D, closing a circular dependency:
A -> D -> C -> B -> A
This however only happens when CONFIG_RCU_EXP_KTHREAD=n. Indeed
synchronize_rcu_expedited() is otherwise implemented on top of a kthread
worker while polling still relies on rcu_gp_wq workqueue, breaking the
above circular dependency chain.
Fix this with making expedited grace period to always rely on kthread
worker. The workqueue based implementation is essentially a duplicate
anyway now that the per-node initialization is performed by per-node
kthread workers.
Meanwhile the CONFIG_RCU_EXP_KTHREAD switch is still kept around to
manage the scheduler policy of these kthread workers.
Reported-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Joel Fernandes <joel@joelfernandes.org>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Suggested-by: Neeraj upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
Affine the parallel expedited gp kworkers to their respective RCU node
in order to make them close to the cache their are playing with.
This reuses the boost kthreads machinery that probe into CPU hotplug
operations such that the kthreads become/stay affine to their respective
node as soon/long as they contain online CPUs. Otherwise and if the
current CPU going down was the last online on the leaf node, the related
kthread is affine to the housekeeping CPUs.
In the long run, this affinity VS CPU hotplug operation game should
probably be implemented at the generic kthread level.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
[boqun: s/* rcu_boost_task/*rcu_boost_task as reported by checkpatch]
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
When CONFIG_RCU_EXP_KTHREAD=n, the expedited grace period per node
initialization is performed in parallel via workqueues (one work per
node).
However in CONFIG_RCU_EXP_KTHREAD=y, this per node initialization is
performed by a single kworker serializing each node initialization (one
work for all nodes).
The second part is certainly less scalable and efficient beyond a single
leaf node.
To improve this, expand this single kworker into per-node kworkers. This
new layout is eventually intended to remove the workqueues based
implementation since it will essentially now become duplicate code.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
rcutree_prepare_cpu()
The expedited kthread worker performing the per node initialization is
going to be split into per node kthreads. As such, the future per node
kthread creation will need to be called from CPU hotplug callbacks
instead of an initcall, right beside the per node boost kthread
creation.
To prepare for that, move the kthread worker creation above
rcutree_prepare_cpu() as a first step to make the review smoother for
the upcoming modifications.
No intended functional change.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
This mutex is currently protecting per node boost kthreads creation and
affinity setting across CPU hotplug operations.
Since the expedited kworkers will soon be split per node as well, they
will be subject to the same concurrency constraints against hotplug.
Therefore their creation and affinity tuning operations will be grouped
with those of boost kthreads and then rely on the same mutex.
To prepare for that, generalize its name.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
Just like is done for the kworker performing nodes initialization,
gracefully handle the possible allocation failure of the RCU expedited
grace period main kworker.
While at it perform a rename of the related checking functions to better
reflect the expedited specifics.
Reviewed-by: Kalesh Singh <kaleshsingh@google.com>
Fixes: 9621fbee44df ("rcu: Move expedited grace period (GP) work to RT kthread_worker")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
recovery
Under CONFIG_RCU_EXP_KTHREAD=y, the nodes initialization for expedited
grace periods is queued to a kworker. However if the allocation of that
kworker failed, the nodes initialization is performed synchronously by
the caller instead.
Now the check for kworker initialization failure relies on the kworker
pointer to be NULL while its value might actually encapsulate an
allocation failure error.
Make sure to handle this case.
Reviewed-by: Kalesh Singh <kaleshsingh@google.com>
Fixes: 9621fbee44df ("rcu: Move expedited grace period (GP) work to RT kthread_worker")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
When an expedited grace period is ending, care must be taken so that all
the quiescent states propagated up to the root are correctly ordered
against the wake up of the main expedited grace period workqueue.
This ordering is already carried through the root rnp locking augmented
by an smp_mb__after_unlock_lock() barrier.
Therefore the explicit smp_mb() placed before the wake up is not needed
and can be removed.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
Currently, only rdp_gp->nocb_timer is used, for nocb_timer of
no-rdp_gp structure, the timer_pending() is always return false,
this commit therefore need to check rdp_gp->nocb_timer in
__call_rcu_nocb_wake().
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
For the kernels built with CONFIG_RCU_NOCB_CPU_DEFAULT_ALL=y and
CONFIG_RCU_LAZY=y, the following scenarios will trigger WARN_ON_ONCE()
in the rcu_nocb_bypass_lock() and rcu_nocb_wait_contended() functions:
CPU2 CPU11
kthread
rcu_nocb_cb_kthread ksys_write
rcu_do_batch vfs_write
rcu_torture_timer_cb proc_sys_write
__kmem_cache_free proc_sys_call_handler
kmemleak_free drop_caches_sysctl_handler
delete_object_full drop_slab
__delete_object shrink_slab
put_object lazy_rcu_shrink_scan
call_rcu rcu_nocb_flush_bypass
__call_rcu_commn rcu_nocb_bypass_lock
raw_spin_trylock(&rdp->nocb_bypass_lock) fail
atomic_inc(&rdp->nocb_lock_contended);
rcu_nocb_wait_contended WARN_ON_ONCE(smp_processor_id() != rdp->cpu);
WARN_ON_ONCE(atomic_read(&rdp->nocb_lock_contended)) |
|_ _ _ _ _ _ _ _ _ _same rdp and rdp->cpu != 11_ _ _ _ _ _ _ _ _ __|
Reproduce this bug with "echo 3 > /proc/sys/vm/drop_caches".
This commit therefore uses rcu_nocb_try_flush_bypass() instead of
rcu_nocb_flush_bypass() in lazy_rcu_shrink_scan(). If the nocb_bypass
queue is being flushed, then rcu_nocb_try_flush_bypass will return
directly.
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
Currently the call_rcu() function interleaves NOCB and !NOCB enqueue
code in a complicated way such that:
* The bypass enqueue code may or may not have enqueued and may or may
not have locked the ->nocb_lock. Everything that follows is in a
Schrödinger locking state for the unwary reviewer's eyes.
* The was_alldone is always set but only used in NOCB related code.
* The NOCB wake up is distantly related to the locking hopefully
performed by the bypass enqueue code that did not enqueue on the
bypass list.
Unconfuse the whole and gather NOCB and !NOCB specific enqueue code to
their own functions.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
Currently IRQs are disabled on call_rcu() and then depending on the
context:
* If the CPU is in nocb mode:
- If the callback is enqueued in the bypass list, IRQs are re-enabled
implictly by rcu_nocb_try_bypass()
- If the callback is enqueued in the normal list, IRQs are re-enabled
implicitly by __call_rcu_nocb_wake()
* If the CPU is NOT in nocb mode, IRQs are reenabled explicitly from call_rcu()
This makes the code a bit hard to follow, especially as it interleaves
with nocb locking.
To make the IRQ flags coverage clearer and also in order to prepare for
moving all the nocb enqueue code to its own function, always re-enable
the IRQ flags explicitly from call_rcu().
Reviewed-by: Neeraj Upadhyay (AMD) <neeraj.iitr10@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
A full barrier is issued from nocb_gp_wait() upon callbacks advancing
to order grace period completion with callbacks execution.
However these two events are already ordered by the
smp_mb__after_unlock_lock() barrier within the call to
raw_spin_lock_rcu_node() that is necessary for callbacks advancing to
happen.
The following litmus test shows the kind of guarantee that this barrier
provides:
C smp_mb__after_unlock_lock
{}
// rcu_gp_cleanup()
P0(spinlock_t *rnp_lock, int *gpnum)
{
// Grace period cleanup increase gp sequence number
spin_lock(rnp_lock);
WRITE_ONCE(*gpnum, 1);
spin_unlock(rnp_lock);
}
// nocb_gp_wait()
P1(spinlock_t *rnp_lock, spinlock_t *nocb_lock, int *gpnum, int *cb_ready)
{
int r1;
// Call rcu_advance_cbs() from nocb_gp_wait()
spin_lock(nocb_lock);
spin_lock(rnp_lock);
smp_mb__after_unlock_lock();
r1 = READ_ONCE(*gpnum);
WRITE_ONCE(*cb_ready, 1);
spin_unlock(rnp_lock);
spin_unlock(nocb_lock);
}
// nocb_cb_wait()
P2(spinlock_t *nocb_lock, int *cb_ready, int *cb_executed)
{
int r2;
// rcu_do_batch() -> rcu_segcblist_extract_done_cbs()
spin_lock(nocb_lock);
r2 = READ_ONCE(*cb_ready);
spin_unlock(nocb_lock);
// Actual callback execution
WRITE_ONCE(*cb_executed, 1);
}
P3(int *cb_executed, int *gpnum)
{
int r3;
WRITE_ONCE(*cb_executed, 2);
smp_mb();
r3 = READ_ONCE(*gpnum);
}
exists (1:r1=1 /\ 2:r2=1 /\ cb_executed=2 /\ 3:r3=0) (* Bad outcome. *)
Here the bad outcome only occurs if the smp_mb__after_unlock_lock() is
removed. This barrier orders the grace period completion against
callbacks advancing and even later callbacks invocation, thanks to the
opportunistic propagation via the ->nocb_lock to nocb_cb_wait().
Therefore the smp_mb() placed after callbacks advancing can be safely
removed.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
The LOAD-ACQUIRE access performed on rdp->nocb_cb_sleep advertizes
ordering callback execution against grace period completion. However
this is contradicted by the following:
* This LOAD-ACQUIRE doesn't pair with anything. The only counterpart
barrier that can be found is the smp_mb() placed after callbacks
advancing in nocb_gp_wait(). However the barrier is placed _after_
->nocb_cb_sleep write.
* Callbacks can be concurrently advanced between the LOAD-ACQUIRE on
->nocb_cb_sleep and the call to rcu_segcblist_extract_done_cbs() in
rcu_do_batch(), making any ordering based on ->nocb_cb_sleep broken.
* Both rcu_segcblist_extract_done_cbs() and rcu_advance_cbs() are called
under the nocb_lock, the latter hereby providing already the desired
ACQUIRE semantics.
Therefore it is safe to access ->nocb_cb_sleep with a simple compiler
barrier.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
|
|
dependent patches
Merge in pending alternatives patching infrastructure changes, before
applying more patches.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
As BPF applications grow in size and complexity and are separated into
multiple .bpf.c files that are statically linked together, it becomes
harder and harder to match verifier's BPF assembly level output to
original C code. While often annotated C source code is unique enough to
be able to identify the file it belongs to, quite often this is actually
problematic as parts of source code can be quite generic.
Long story short, it is very useful to see source code file name and
line number information along with the original C code. Verifier already
knows this information, we just need to output it.
This patch extends verifier log with file name and line number
information, emitted next to original (presumably C) source code,
annotating BPF assembly output, like so:
; <original C code> @ <filename>.bpf.c:<line>
If file name has directory names in it, they are stripped away. This
should be fine in practice as file names tend to be pretty unique with
C code anyways, and keeping log size smaller is always good.
In practice this might look something like below, where some code is
coming from application files, while others are from libbpf's usdt.bpf.h
header file:
; if (STROBEMETA_READ( @ strobemeta_probe.bpf.c:534
5592: (79) r1 = *(u64 *)(r10 -56) ; R1_w=mem_or_null(id=1589,sz=7680) R10=fp0
5593: (7b) *(u64 *)(r10 -56) = r1 ; R1_w=mem_or_null(id=1589,sz=7680) R10=fp0
5594: (79) r3 = *(u64 *)(r10 -8) ; R3_w=scalar() R10=fp0 fp-8=mmmmmmmm
...
170: (71) r1 = *(u8 *)(r8 +15) ; frame1: R1_w=scalar(...) R8_w=map_value(map=__bpf_usdt_spec,ks=4,vs=208)
171: (67) r1 <<= 56 ; frame1: R1_w=scalar(...)
172: (c7) r1 s>>= 56 ; frame1: R1_w=scalar(smin=smin32=-128,smax=smax32=127)
; val <<= arg_spec->arg_bitshift; @ usdt.bpf.h:183
173: (67) r1 <<= 32 ; frame1: R1_w=scalar(...)
174: (77) r1 >>= 32 ; frame1: R1_w=scalar(smin=0,smax=umax=0xffffffff,var_off=(0x0; 0xffffffff))
175: (79) r2 = *(u64 *)(r10 -8) ; frame1: R2_w=scalar() R10=fp0 fp-8=mmmmmmmm
176: (6f) r2 <<= r1 ; frame1: R1_w=scalar(smin=0,smax=umax=0xffffffff,var_off=(0x0; 0xffffffff)) R2_w=scalar()
177: (7b) *(u64 *)(r10 -8) = r2 ; frame1: R2_w=scalar(id=61) R10=fp0 fp-8_w=scalar(id=61)
; if (arg_spec->arg_signed) @ usdt.bpf.h:184
178: (bf) r3 = r2 ; frame1: R2_w=scalar(id=61) R3_w=scalar(id=61)
179: (7f) r3 >>= r1 ; frame1: R1_w=scalar(smin=0,smax=umax=0xffffffff,var_off=(0x0; 0xffffffff)) R3_w=scalar()
; if (arg_spec->arg_signed) @ usdt.bpf.h:184
180: (71) r4 = *(u8 *)(r8 +14)
181: safe
log_fixup tests needed a minor adjustment as verifier log output
increased a bit and that test is quite sensitive to such changes.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240212235944.2816107-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
For program types that don't have named context type name (e.g., BPF
iterator programs or tracepoint programs), ctx_tname will be a non-NULL
empty string. For such programs it shouldn't be possible to have
PTR_TO_CTX argument for global subprogs based on type name alone.
arg:ctx tag is the only way to have PTR_TO_CTX passed into global
subprog for such program types.
Fix this loophole, which currently would assume PTR_TO_CTX whenever
user uses a pointer to anonymous struct as an argument to their global
subprogs. This happens in practice with the following (quite common, in
practice) approach:
typedef struct { /* anonymous */
int x;
} my_type_t;
int my_subprog(my_type_t *arg) { ... }
User's intent is to have PTR_TO_MEM argument for `arg`, but verifier
will complain about expecting PTR_TO_CTX.
This fix also closes unintended s390x-specific KPROBE handling of
PTR_TO_CTX case. Selftest change is necessary to accommodate this.
Fixes: 91cc1a99740e ("bpf: Annotate context types")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240212233221.2575350-4-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Expected canonical argument type for global function arguments
representing PTR_TO_CTX is `bpf_user_pt_regs_t *ctx`. This currently
works on s390x by accident because kernel resolves such typedef to
underlying struct (which is anonymous on s390x), and erroneously
accepting it as expected context type. We are fixing this problem next,
which would break s390x arch, so we need to handle `bpf_user_pt_regs_t`
case explicitly for KPROBE programs.
Fixes: 91cc1a99740e ("bpf: Annotate context types")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240212233221.2575350-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Return result of btf_get_prog_ctx_type() is never used and callers only
check NULL vs non-NULL case to determine if given type matches expected
PTR_TO_CTX type. So rename function to `btf_is_prog_ctx_type()` and
return a simple true/false. We'll use this simpler interface to handle
kprobe program type's special typedef case in the next patch.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240212233221.2575350-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Originally, this patch removed a redundant check in
BPF_CGROUP_RUN_PROG_INET_EGRESS, as the check was already being done in
the function it called, __cgroup_bpf_run_filter_skb. For v2, it was
reccomended that I remove the check from __cgroup_bpf_run_filter_skb,
and add the checks to the other macro that calls that function,
BPF_CGROUP_RUN_PROG_INET_INGRESS.
To sum it up, checking that the socket exists and that it is a full
socket is now part of both macros BPF_CGROUP_RUN_PROG_INET_EGRESS and
BPF_CGROUP_RUN_PROG_INET_INGRESS, and it is no longer part of the
function they call, __cgroup_bpf_run_filter_skb.
v3->v4: Fixed weird merge conflict.
v2->v3: Sent to bpf-next instead of generic patch
v1->v2: Addressed feedback about where check should be removed.
Signed-off-by: Oliver Crumrine <ozlinuxc@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/7lv62yiyvmj5a7eozv2iznglpkydkdfancgmbhiptrgvgan5sy@3fl3onchgdz3
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
