| Age | Commit message (Collapse) | Author |
|---|
|
Currently, there are two test cases with same name
"ALU64_SMOD_X: -7 % 2 = -1", the first one is right,
the second one should be ALU64_SMOD_K because its
code is BPF_ALU64 | BPF_MOD | BPF_K.
Before:
test_bpf: #170 ALU64_SMOD_X: -7 % 2 = -1 jited:1 4 PASS
test_bpf: #171 ALU64_SMOD_X: -7 % 2 = -1 jited:1 4 PASS
After:
test_bpf: #170 ALU64_SMOD_X: -7 % 2 = -1 jited:1 4 PASS
test_bpf: #171 ALU64_SMOD_K: -7 % 2 = -1 jited:1 4 PASS
Fixes: daabb2b098e0 ("bpf/tests: add tests for cpuv4 instructions")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231207040851.19730-1-yangtiezhu@loongson.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"31 hotfixes. Ten of these address pre-6.6 issues and are marked
cc:stable. The remainder address post-6.6 issues or aren't considered
serious enough to justify backporting"
* tag 'mm-hotfixes-stable-2023-12-07-18-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits)
mm/madvise: add cond_resched() in madvise_cold_or_pageout_pte_range()
nilfs2: prevent WARNING in nilfs_sufile_set_segment_usage()
mm/hugetlb: have CONFIG_HUGETLB_PAGE select CONFIG_XARRAY_MULTI
scripts/gdb: fix lx-device-list-bus and lx-device-list-class
MAINTAINERS: drop Antti Palosaari
highmem: fix a memory copy problem in memcpy_from_folio
nilfs2: fix missing error check for sb_set_blocksize call
kernel/Kconfig.kexec: drop select of KEXEC for CRASH_DUMP
units: add missing header
drivers/base/cpu: crash data showing should depends on KEXEC_CORE
mm/damon/sysfs-schemes: add timeout for update_schemes_tried_regions
scripts/gdb/tasks: fix lx-ps command error
mm/Kconfig: make userfaultfd a menuconfig
selftests/mm: prevent duplicate runs caused by TEST_GEN_PROGS
mm/damon/core: copy nr_accesses when splitting region
lib/group_cpus.c: avoid acquiring cpu hotplug lock in group_cpus_evenly
checkstack: fix printed address
mm/memory_hotplug: fix error handling in add_memory_resource()
mm/memory_hotplug: add missing mem_hotplug_lock
.mailmap: add a new address mapping for Chester Lin
...
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/stmicro/stmmac/dwmac5.c
drivers/net/ethernet/stmicro/stmmac/dwmac5.h
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c
drivers/net/ethernet/stmicro/stmmac/hwif.h
37e4b8df27bc ("net: stmmac: fix FPE events losing")
c3f3b97238f6 ("net: stmmac: Refactor EST implementation")
https://lore.kernel.org/all/20231206110306.01e91114@canb.auug.org.au/
Adjacent changes:
net/ipv4/tcp_ao.c
9396c4ee93f9 ("net/tcp: Don't store TCP-AO maclen on reqsk")
7b0f570f879a ("tcp: Move TCP-AO bits from cookie_v[46]_check() to tcp_ao_syncookie().")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
|
|
group_cpus_evenly() could be part of storage driver's error handler, such
as nvme driver, when may happen during CPU hotplug, in which storage queue
has to drain its pending IOs because all CPUs associated with the queue
are offline and the queue is becoming inactive. And handling IO needs
error handler to provide forward progress.
Then deadlock is caused:
1) inside CPU hotplug handler, CPU hotplug lock is held, and blk-mq's
handler is waiting for inflight IO
2) error handler is waiting for CPU hotplug lock
3) inflight IO can't be completed in blk-mq's CPU hotplug handler
because error handling can't provide forward progress.
Solve the deadlock by not holding CPU hotplug lock in group_cpus_evenly(),
in which two stage spreads are taken: 1) the 1st stage is over all present
CPUs; 2) the end stage is over all other CPUs.
Turns out the two stage spread just needs consistent 'cpu_present_mask',
and remove the CPU hotplug lock by storing it into one local cache. This
way doesn't change correctness, because all CPUs are still covered.
Link: https://lkml.kernel.org/r/20231120083559.285174-1-ming.lei@redhat.com
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Tested-by: Guangwu Zhang <guazhang@redhat.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Cc: Keith Busch <kbusch@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The original intention of acpi_parse_entries_array() is to return the
number of all matching entries on success. This number may be greater than
the value of the max_entries parameter. When this happens, the function
will output a warning message, indicating that `count - max_entries`
matching entries remain unprocessed and have been ignored.
However, commit 4ceacd02f5a1 ("ACPI / table: Always count matched and
successfully parsed entries") changed this logic to return the number of
entries successfully processed by the handler. In this case, when the
max_entries parameter is not zero, the number of entries successfully
processed can never be greater than the value of max_entries. In other
words, the expression `count > max_entries` will always evaluate to false.
This means that the logic in the final if statement will never be executed.
Commit 99b0efd7c886 ("ACPI / tables: do not report the number of entries
ignored by acpi_parse_entries()") mentioned this issue, but it tried to fix
it by removing part of the warning message. This is meaningless because the
pr_warn statement will never be executed in the first place.
Commit 8726d4f44150 ("ACPI / tables: fix acpi_parse_entries_array() so it
traverses all subtables") introduced an errs variable, which is intended to
make acpi_parse_entries_array() always traverse all of the subtables,
calling as many of the callbacks as possible. However, it seems that the
commit does not achieve this goal. For example, when a handler returns an
error, none of the handlers will be called again in the subsequent
iterations. This result appears to be no different from before the change.
This patch corrects and cleans up the logic of acpi_parse_entries_array(),
making it return the number of all matching entries, rather than the number
of entries successfully processed by handlers. Additionally, if an error
occurs when executing a handler, the function will return -EINVAL immediately.
This patch should not affect existing users of acpi_parse_entries_array().
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
A refcount issue can appeared in __fwnode_link_del() due to the
pr_debug() call:
WARNING: CPU: 0 PID: 901 at lib/refcount.c:25 refcount_warn_saturate+0xe5/0x110
Call Trace:
<TASK>
...
of_node_get+0x1e/0x30
of_fwnode_get+0x28/0x40
fwnode_full_name_string+0x34/0x90
fwnode_string+0xdb/0x140
...
vsnprintf+0x17b/0x630
...
__fwnode_link_del+0x25/0xa0
fwnode_links_purge+0x39/0xb0
of_node_release+0xd9/0x180
...
Indeed, an fwnode (of_node) is being destroyed and so, of_node_release()
is called because the of_node refcount reached 0.
From of_node_release() several function calls are done and lead to
a pr_debug() calls with %pfwf to print the fwnode full name.
The issue is not present if we change %pfwf to %pfwP.
To print the full name, %pfwf iterates over the current node and its
parents and obtain/drop a reference to all nodes involved.
In order to allow to print the full name (%pfwf) of a node while it is
being destroyed, do not obtain/drop a reference to this current node.
Fixes: a92eb7621b9f ("lib/vsprintf: Make use of fwnode API to obtain node names and separators")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20231114152655.409331-1-herve.codina@bootlin.com
|
|
With the removal of the 'iov' argument to import_single_range(), the two
functions are now fully identical. Convert the import_single_range()
callers to import_ubuf(), and remove the former fully.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20231204174827.1258875-3-axboe@kernel.dk
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
It is entirely unused, just get rid of it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20231204174827.1258875-2-axboe@kernel.dk
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Remove CONFIG_SLAB, CONFIG_DEBUG_SLAB, CONFIG_SLAB_DEPRECATED and
everything in Kconfig files and mm/Makefile that depends on those. Since
SLUB is the only remaining allocator, remove the allocator choice, make
CONFIG_SLUB a "def_bool y" for now and remove all explicit dependencies
on SLUB or SLAB as it's now always enabled. Make every option's verbose
name and description refer to "the slab allocator" without refering to
the specific implementation. Do not rename the CONFIG_ option names yet.
Everything under #ifdef CONFIG_SLAB, and mm/slab.c is now dead code, all
code under #ifdef CONFIG_SLUB is now always compiled.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christoph Lameter <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- objpool: Fix objpool overrun case on memory/cache access delay
especially on the big.LITTLE SoC. The objpool uses a copy of object
slot index internal loop, but the slot index can be changed on
another processor in parallel. In that case, the difference of 'head'
local copy and the 'slot->last' index will be bigger than local slot
size. In that case, we need to re-read the slot::head to update it.
- kretprobe: Fix to use appropriate rcu API for kretprobe holder. Since
kretprobe_holder::rp is RCU managed, it should use
rcu_assign_pointer() and rcu_dereference_check() correctly. Also
adding __rcu tag for finding wrong usage by sparse.
- rethook: Fix to use appropriate rcu API for rethook::handler. The
same as kretprobe, rethook::handler is RCU managed and it should use
rcu_assign_pointer() and rcu_dereference_check(). This also adds
__rcu tag for finding wrong usage by sparse.
* tag 'probes-fixes-v6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rethook: Use __rcu pointer for rethook::handler
kprobes: consistent rcu api usage for kretprobe holder
lib: objpool: fix head overrun on RK3588 SBC
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"This fixes a recently introduced build issue on ARM32 and a NULL
pointer dereference in the ACPI backlight driver due to a design issue
exposed by a recent change in the ACPI bus type code.
Specifics:
- Fix a recently introduced build issue on ARM32 platforms caused by
an inadvertent header file breakage (Dave Jiang)
- Eliminate questionable usage of acpi_driver_data() in the ACPI
backlight cooling device code that leads to NULL pointer
dereferences after recent ACPI core changes (Hans de Goede)"
* tag 'acpi-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: video: Use acpi_video_device for cooling-dev driver data
ACPI: Fix ARM32 platforms compile issue introduced by fw_table changes
|
|
Pull more bcachefs bugfixes from Kent Overstreet:
- bcache & bcachefs were broken with CFI enabled; patch for closures to
fix type punning
- mark erasure coding as extra-experimental; there are incompatible
disk space accounting changes coming for erasure coding, and I'm
still seeing checksum errors in some tests
- several fixes for durability-related issues (durability is a device
specific setting where we can tell bcachefs that data on a given
device should be counted as replicated x times)
- a fix for a rare livelock when a btree node merge then updates a
parent node that is almost full
- fix a race in the device removal path, where dropping a pointer in a
btree node to a device would be clobbered by an in flight btree write
updating the btree node key on completion
- fix one SRCU lock hold time warning in the btree gc code - ther's
still a bunch more of these to fix
- fix a rare race where we'd start copygc before initializing the "are
we rw" percpu refcount; copygc would think we were already ro and die
immediately
* tag 'bcachefs-2023-11-29' of https://evilpiepirate.org/git/bcachefs: (23 commits)
bcachefs: Extra kthread_should_stop() calls for copygc
bcachefs: Convert gc_alloc_start() to for_each_btree_key2()
bcachefs: Fix race between btree writes and metadata drop
bcachefs: move journal seq assertion
bcachefs: -EROFS doesn't count as move_extent_start_fail
bcachefs: trace_move_extent_start_fail() now includes errcode
bcachefs: Fix split_race livelock
bcachefs: Fix bucket data type for stripe buckets
bcachefs: Add missing validation for jset_entry_data_usage
bcachefs: Fix zstd compress workspace size
bcachefs: bpos is misaligned on big endian
bcachefs: Fix ec + durability calculation
bcachefs: Data update path won't accidentaly grow replicas
bcachefs: deallocate_extra_replicas()
bcachefs: Proper refcounting for journal_keys
bcachefs: preserve device path as device name
bcachefs: Fix an endianness conversion
bcachefs: Start gc, copygc, rebalance threads after initing writes ref
bcachefs: Don't stop copygc thread on device resize
bcachefs: Make sure bch2_move_ratelimit() also waits for move_ops
...
|
|
Merge a fix for a recently introduced build issue on ARM32 platforms
caused by an inadvertent header file breakage (Dave Jiang).
* acpi-tables:
ACPI: Fix ARM32 platforms compile issue introduced by fw_table changes
|
|
objpool overrun stress with test_objpool on OrangePi5+ SBC triggered the
following kernel warnings:
WARNING: CPU: 6 PID: 3115 at lib/objpool.c:168 objpool_push+0xc0/0x100
This message is from objpool.c:168:
WARN_ON_ONCE(tail - head > pool->nr_objs);
The overrun test case is to validate the case that pre-allocated objects
are insufficient: 8 objects are pre-allocated for each node and consumer
thread per node tries to grab 16 objects in a row. The testing system is
OrangePI 5+, with RK3588, a big.LITTLE SOC with 4x A76 and 4x A55. When
disabling either all 4 big or 4 little cores, the overrun tests run well,
and once with big and little cores mixed together, the overrun test would
always cause an overrun loop. It's likely the memory timing differences
of big and little cores cause this trouble. Here are the debugging data
of objpool_try_get_slot after try_cmpxchg_release:
objpool_pop: cpu: 4/0 0:0 head: 278/279 tail:278 last:276/278
The local copies of 'head' and 'last' were 278 and 276, and reloading of
'slot->head' and 'slot->last' got 279 and 278. After try_cmpxchg_release
'slot->head' became 'head + 1', which is correct. But what's wrong here
is the stale value of 'last', and that stale value of 'last' finally led
the overrun of 'head'.
Memory updating of 'last' and 'head' are performed in push() and pop()
independently, which could be the culprit leading this out of order
visibility of 'last' and 'head'. So for objpool_try_get_slot(), it's
not enough only checking the condition of 'head != slot', the implicit
condition 'last - head <= nr_objs' must also be explicitly asserted to
guarantee 'last' is always behind 'head' before the object retrieving.
This patch will check and try reloading of 'head' and 'last' to ensure
'last' is behind 'head' at the time of object retrieving. Performance
testings show the average impact is about 0.1% for X86_64 and 1.12% for
ARM64. Here are the results:
OS: Debian 10 X86_64, Linux 6.6rc
HW: XEON 8336C x 2, 64 cores/128 threads, DDR4 3200MT/s
1T 2T 4T 8T 16T
native: 49543304 99277826 199017659 399070324 795185848
objpool: 29909085 59865637 119692073 239750369 478005250
objpool+: 29879313 59230743 119609856 239067773 478509029
32T 48T 64T 96T 128T
native: 1596927073 2390099988 2929397330 3183875848 3257546602
objpool: 957553042 1435814086 1680872925 2043126796 2165424198
objpool+: 956476281 1434491297 1666055740 2041556569 2157415622
OS: Debian 11 AARCH64, Linux 6.6rc
HW: Kunpeng-920 96 cores/2 sockets/4 NUMA nodes, DDR4 2933 MT/s
1T 2T 4T 8T 16T
native: 30890508 60399915 123111980 242257008 494002946
objpool: 14742531 28883047 57739948 115886644 232455421
objpool+: 14107220 29032998 57286084 113730493 232232850
24T 32T 48T 64T 96T
native: 746406039 1000174750 1493236240 1998318364 2942911180
objpool: 349164852 467284332 702296756 934459713 1387898285
objpool+: 348388180 462750976 696606096 927865887 1368402195
Link: https://lore.kernel.org/all/20231114115148.298821-1-wuqiang.matt@bytedance.com/
Fixes: b4edb8d2d464 ("lib: objpool added: ring-array based lockless MPMC")
Signed-off-by: wuqiang.matt <wuqiang.matt@bytedance.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fixes from Shuah Khan:
"Three fixes to warnings and run-time test behavior. With these fixes,
test suite counter will be reset correctly before running tests, kunit
will warn if tests are too slow, and eliminate warning when kfree() as
an action"
* tag 'linux_kselftest-kunit-fixes-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: test: Avoid cast warning when adding kfree() as an action
kunit: Reset suite counter right before running tests
kunit: Warn if tests are slow
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-11-30
We've added 30 non-merge commits during the last 7 day(s) which contain
a total of 58 files changed, 1598 insertions(+), 154 deletions(-).
The main changes are:
1) Add initial TX metadata implementation for AF_XDP with support in mlx5
and stmmac drivers. Two types of offloads are supported right now, that
is, TX timestamp and TX checksum offload, from Stanislav Fomichev with
stmmac implementation from Song Yoong Siang.
2) Change BPF verifier logic to validate global subprograms lazily instead
of unconditionally before the main program, so they can be guarded using
BPF CO-RE techniques, from Andrii Nakryiko.
3) Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter, from Jiri Olsa.
4) Use pkg-config in BPF selftests to determine ld flags which is
in particular needed for linking statically, from Akihiko Odaki.
5) Fix a few BPF selftest failures to adapt to the upcoming LLVM18,
from Yonghong Song.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (30 commits)
bpf/tests: Remove duplicate JSGT tests
selftests/bpf: Add TX side to xdp_hw_metadata
selftests/bpf: Convert xdp_hw_metadata to XDP_USE_NEED_WAKEUP
selftests/bpf: Add TX side to xdp_metadata
selftests/bpf: Add csum helpers
selftests/xsk: Support tx_metadata_len
xsk: Add option to calculate TX checksum in SW
xsk: Validate xsk_tx_metadata flags
xsk: Document tx_metadata_len layout
net: stmmac: Add Tx HWTS support to XDP ZC
net/mlx5e: Implement AF_XDP TX timestamp and checksum offload
tools: ynl: Print xsk-features from the sample
xsk: Add TX timestamp and TX checksum offload support
xsk: Support tx_metadata_len
selftests/bpf: Use pkg-config for libelf
selftests/bpf: Override PKG_CONFIG for static builds
selftests/bpf: Choose pkg-config for the target
bpftool: Add support to display uprobe_multi links
selftests/bpf: Add link_info test for uprobe_multi link
selftests/bpf: Use bpf_link__destroy in fill_link_info tests
...
====================
Conflicts:
Documentation/netlink/specs/netdev.yaml:
839ff60df3ab ("net: page_pool: add nlspec for basic access to page pools")
48eb03dd2630 ("xsk: Add TX timestamp and TX checksum offload support")
https://lore.kernel.org/all/20231201094705.1ee3cab8@canb.auug.org.au/
While at it also regen, tree is dirty after:
48eb03dd2630 ("xsk: Add TX timestamp and TX checksum offload support")
looks like code wasn't re-rendered after "render-max" was removed.
Link: https://lore.kernel.org/r/20231130145708.32573-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It seems unnecessary that JSGT is tested twice (one before JSGE and one
after JSGE) since others are tested only once. Remove the duplicate JSGT
tests.
Fixes: 0bbaa02b4816 ("bpf/tests: Add tests to check source register zero-extension")
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Link: https://lore.kernel.org/bpf/20231130034018.2144963-1-yujie.liu@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
"This patchset fixes and enforces correct section alignments for the
ex_table, altinstructions, parisc_unwind, jump_table and bug_table
which are created by inline assembly.
Due to not being correctly aligned at link & load time they can
trigger unnecessarily the kernel unaligned exception handler at
runtime. While at it, I switched the bug table to use relative
addresses which reduces the size of the table by half on 64-bit.
We still had the ENOSYM and EREMOTERELEASE errno symbols as left-overs
from HP-UX, which now trigger build-issues with glibc. We can simply
remove them.
Most of the patches are tagged for stable kernel series.
Summary:
- Drop HP-UX ENOSYM and EREMOTERELEASE return codes to avoid glibc
build issues
- Fix section alignments for ex_table, altinstructions, parisc unwind
table, jump_table and bug_table
- Reduce size of bug_table on 64-bit kernel by using relative
pointers"
* tag 'parisc-for-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Reduce size of the bug_table on 64-bit kernel by half
parisc: Drop the HP-UX ENOSYM and EREMOTERELEASE error codes
parisc: Use natural CPU alignment for bug_table
parisc: Ensure 32-bit alignment on parisc unwind section
parisc: Mark lock_aligned variables 16-byte aligned on SMP
parisc: Mark jump_table naturally aligned
parisc: Mark altinstructions read-only and 32-bit aligned
parisc: Mark ex_table entries 32-bit aligned in uaccess.h
parisc: Mark ex_table entries 32-bit aligned in assembly.h
|
|
Those return codes are only defined for the parisc architecture and
are leftovers from when we wanted to be HP-UX compatible.
They are not returned by any Linux kernel syscall but do trigger
problems with the glibc strerrorname_np() and strerror() functions as
reported in glibc issue #31080.
There is no need to keep them, so simply remove them.
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: Bruno Haible <bruno@clisp.org>
Closes: https://sourceware.org/bugzilla/show_bug.cgi?id=31080
Cc: stable@vger.kernel.org
|
|
Kory says:
====================
This patch was initially submitted as part of a net patch series.
Conor expressed interest in using it in a different subsystem.
https://lore.kernel.org/netdev/20231116-feature_poe-v1-7-be48044bf249@bootlin.com/
Consequently, I extracted it from the series and submitted it separately.
I first tried to send it to driver-core but it seems also not the best
choice:
https://lore.kernel.org/lkml/2023111720-slicer-exes-7d9f@gregkh/
====================
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No error code are available to signal an invalid firmware content.
Drivers that can check the firmware content validity can not return this
specific failure to the user-space
Expand the firmware error code with an additional code:
- "firmware invalid" code which can be used when the provided firmware
is invalid
Sync lib/test_firmware.c file accordingly.
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231122-feature_firmware_error_code-v3-1-04ec753afb71@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Avoid calling back into LSMs from vfs_getattr_nosec() calls.
IMA used to query inode properties accessing raw inode fields without
dedicated helpers. That was finally fixed a few releases ago by
forcing IMA to use vfs_getattr_nosec() helpers.
The goal of the vfs_getattr_nosec() helper is to query for attributes
without calling into the LSM layer which would be quite problematic
because incredibly IMA is called from __fput()...
__fput()
-> ima_file_free()
What it does is to call back into the filesystem to update the file's
IMA xattr. Querying the inode without using vfs_getattr_nosec() meant
that IMA didn't handle stacking filesystems such as overlayfs
correctly. So the switch to vfs_getattr_nosec() is quite correct. But
the switch to vfs_getattr_nosec() revealed another bug when used on
stacking filesystems:
__fput()
-> ima_file_free()
-> vfs_getattr_nosec()
-> i_op->getattr::ovl_getattr()
-> vfs_getattr()
-> i_op->getattr::$WHATEVER_UNDERLYING_FS_getattr()
-> security_inode_getattr() # calls back into LSMs
Now, if that __fput() happens from task_work_run() of an exiting task
current->fs and various other pointer could already be NULL. So
anything in the LSM layer relying on that not being NULL would be
quite surprised.
Fix that by passing the information that this is a security request
through to the stacking filesystem by adding a new internal
ATT_GETATTR_NOSEC flag. Now the callchain becomes:
__fput()
-> ima_file_free()
-> vfs_getattr_nosec()
-> i_op->getattr::ovl_getattr()
-> if (AT_GETATTR_NOSEC)
vfs_getattr_nosec()
else
vfs_getattr()
-> i_op->getattr::$WHATEVER_UNDERLYING_FS_getattr()
- Fix a bug introduced with the iov_iter rework from last cycle.
This broke /proc/kcore by copying too much and without the correct
offset.
- Add a missing NULL check when allocating the root inode in
autofs_fill_super().
- Fix stable writes for multi-device filesystems (xfs, btrfs etc) and
the block device pseudo filesystem.
Stable writes used to be a superblock flag only, making it a per
filesystem property. Add an additional AS_STABLE_WRITES mapping flag
to allow for fine-grained control.
- Ensure that offset_iterate_dir() returns 0 after reaching the end of
a directory so it adheres to getdents() convention.
* tag 'vfs-6.7-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
libfs: getdents() should return 0 after reaching EOD
xfs: respect the stable writes flag on the RT device
xfs: clean up FS_XFLAG_REALTIME handling in xfs_ioctl_setattr_xflags
block: update the stable_writes flag in bdev_add
filemap: add a per-mapping stable writes flag
autofs: add: new_inode check in autofs_fill_super()
iov_iter: fix copy_page_to_iter_nofault()
fs: Pass AT_GETATTR_NOSEC flag to getattr interface function
|
|
Control flow integrity is now checking that type signatures match on
indirect function calls. That breaks closures, which embed a work_struct
in a closure in such a way that a closure_fn may also be used as a
workqueue fn by the underlying closure code.
So we have to change closure fns to take a work_struct as their
argument - but that results in a loss of clarity, as closure fns have
different semantics from normal workqueue functions (they run owning a
ref on the closure, which must be released with continue_at() or
closure_return()).
Thus, this patc introduces CLOSURE_CALLBACK() and closure_type() macros
as suggested by Kees, to smooth things over a bit.
Suggested-by: Kees Cook <keescook@chromium.org>
Cc: Coly Li <colyli@suse.de>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Linus reported that:
After commit a103f46633fd the kernel stopped compiling for
several ARM32 platforms that I am building with a bare metal
compiler. Bare metal compilers (arm-none-eabi-) don't
define __linux__.
This is because the header <acpi/platform/acenv.h> is now
in the include path for <linux/irq.h>:
CC arch/arm/kernel/irq.o
CC kernel/sysctl.o
CC crypto/api.o
In file included from ../include/acpi/acpi.h:22,
from ../include/linux/fw_table.h:29,
from ../include/linux/acpi.h:18,
from ../include/linux/irqchip.h:14,
from ../arch/arm/kernel/irq.c:25:
../include/acpi/platform/acenv.h:218:2: error: #error Unknown target environment
218 | #error Unknown target environment
| ^~~~~
The issue is caused by the introducing of splitting out the ACPI code to
support the new generic fw_table code.
Rafael suggested [1] moving the fw_table.h include in linux/acpi.h to below
the linux/mutex.h. Remove the two includes in fw_table.h. Replace
linux/fw_table.h include in fw_table.c with linux/acpi.h.
Link: https://lore.kernel.org/linux-acpi/CAJZ5v0idWdJq3JSqQWLG5q+b+b=zkEdWR55rGYEoxh7R6N8kFQ@mail.gmail.com/
Fixes: a103f46633fd ("acpi: Move common tables helper functions to common lib")
Closes: https://lore.kernel.org/linux-acpi/20231114-arm-build-bug-v1-1-458745fe32a4@linaro.org/
Reported-by: Linus Walleij <linus.walleij@linaro.org>
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
After release of the hashbucket lock the tracking object can be modified or
freed by a concurrent thread. Using it in such a case is error prone, even
for printing the object state:
1. T1 tries to deactivate destroyed object, debugobjects detects it,
hash bucket lock is released.
2. T2 preempts T1 and frees the tracking object.
3. The freed tracking object is allocated and initialized for a
different to be tracked kernel object.
4. T1 resumes and reports error for wrong kernel object.
Create a local copy of the tracking object before releasing the hash bucket
lock and use the local copy for reporting and fixups to prevent this.
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20231025-debugobjects_fix-v3-1-2bc3bf7084c2@intel.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-11-21
We've added 85 non-merge commits during the last 12 day(s) which contain
a total of 63 files changed, 4464 insertions(+), 1484 deletions(-).
The main changes are:
1) Huge batch of verifier changes to improve BPF register bounds logic
and range support along with a large test suite, and verifier log
improvements, all from Andrii Nakryiko.
2) Add a new kfunc which acquires the associated cgroup of a task within
a specific cgroup v1 hierarchy where the latter is identified by its id,
from Yafang Shao.
3) Extend verifier to allow bpf_refcount_acquire() of a map value field
obtained via direct load which is a use-case needed in sched_ext,
from Dave Marchevsky.
4) Fix bpf_get_task_stack() helper to add the correct crosstask check
for the get_perf_callchain(), from Jordan Rome.
5) Fix BPF task_iter internals where lockless usage of next_thread()
was wrong. The rework also simplifies the code, from Oleg Nesterov.
6) Fix uninitialized tail padding via LIBBPF_OPTS_RESET, and another
fix for certain BPF UAPI structs to fix verifier failures seen
in bpf_dynptr usage, from Yonghong Song.
7) Add BPF selftest fixes for map_percpu_stats flakes due to per-CPU BPF
memory allocator not being able to allocate per-CPU pointer successfully,
from Hou Tao.
8) Add prep work around dynptr and string handling for kfuncs which
is later going to be used by file verification via BPF LSM and fsverity,
from Song Liu.
9) Improve BPF selftests to update multiple prog_tests to use ASSERT_*
macros, from Yuran Pereira.
10) Optimize LPM trie lookup to check prefixlen before walking the trie,
from Florian Lehner.
11) Consolidate virtio/9p configs from BPF selftests in config.vm file
given they are needed consistently across archs, from Manu Bretelle.
12) Small BPF verifier refactor to remove register_is_const(),
from Shung-Hsi Yu.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits)
selftests/bpf: Replaces the usage of CHECK calls for ASSERTs in vmlinux
selftests/bpf: Replaces the usage of CHECK calls for ASSERTs in bpf_obj_id
selftests/bpf: Replaces the usage of CHECK calls for ASSERTs in bind_perm
selftests/bpf: Replaces the usage of CHECK calls for ASSERTs in bpf_tcp_ca
selftests/bpf: reduce verboseness of reg_bounds selftest logs
bpf: bpf_iter_task_next: use next_task(kit->task) rather than next_task(kit->pos)
bpf: bpf_iter_task_next: use __next_thread() rather than next_thread()
bpf: task_group_seq_get_next: use __next_thread() rather than next_thread()
bpf: emit frameno for PTR_TO_STACK regs if it differs from current one
bpf: smarter verifier log number printing logic
bpf: omit default off=0 and imm=0 in register state log
bpf: emit map name in register state if applicable and available
bpf: print spilled register state in stack slot
bpf: extract register state printing
bpf: move verifier state printing code to kernel/bpf/log.c
bpf: move verbose_linfo() into kernel/bpf/log.c
bpf: rename BPF_F_TEST_SANITY_STRICT to BPF_F_TEST_REG_INVARIANTS
bpf: Remove test for MOVSX32 with offset=32
selftests/bpf: add iter test requiring range x range logic
veristat: add ability to set BPF_F_TEST_SANITY_STRICT flag with -r flag
...
====================
Link: https://lore.kernel.org/r/20231122000500.28126-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The recent conversion to inline functions made two mistakes:
1. It tries to copy the full amount requested (bytes), not just what's
available in the kmap'd page (n).
2. It's not applying the offset in the first page.
Note that copy_page_to_iter_nofault() is only used by /proc/kcore. This
was detected by drgn's test suite.
Fixes: f1982740f5e7 ("iov_iter: Convert iterate*() to inline funcs")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Link: https://lore.kernel.org/r/c1616e06b5248013cbbb1881bb4fef85a7a69ccb.1700257019.git.osandov@fb.com
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add kernel documentation for the aesgcm_mac.
This function generates the authentication tag using the AES-GCM algorithm.
Signed-off-by: Sagar Vashnav <sagarvashnav72427@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
MOVSX32 only supports sign extending 8-bit and 16-bit operands into 32
bit operands. The "ALU_MOVSX | BPF_W" test tries to sign extend a 32 bit
operand into a 32 bit operand which is equivalent to a normal BPF_MOV.
Remove this test as it tries to run an invalid instruction.
Fixes: daabb2b098e0 ("bpf/tests: add tests for cpuv4 instructions")
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202310111838.46ff5b6a-oliver.sang@intel.com
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231110175150.87803-1-puranjay12@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Pull Zstd fix from Nick Terrell:
"Only a single line change to fix a benign UBSAN warning"
* tag 'zstd-linus-v6.7-rc2' of https://github.com/terrelln/linux:
zstd: Fix array-index-out-of-bounds UBSAN warning
|
|
Zstd used an array of length 1 to mean a flexible array for C89
compatibility. Switch to a C99 flexible array to fix the UBSAN warning.
Tested locally by booting the kernel and writing to and reading from a
BtrFS filesystem with zstd compression enabled. I was unable to reproduce
the issue before the fix, however it is a trivial change.
Link: https://lkml.kernel.org/r/20231012213428.1390905-1-nickrterrell@gmail.com
Reported-by: syzbot+1f2eb3e8cd123ffce499@syzkaller.appspotmail.com
Reported-by: Eric Biggers <ebiggers@kernel.org>
Reported-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nick Terrell <terrelln@fb.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
|
|
In kunit_log_test() pass the kfree_wrapper() function to kunit_add_action()
instead of directly passing kfree().
This prevents a cast warning:
lib/kunit/kunit-test.c:565:25: warning: cast from 'void (*)(const void *)'
to 'kunit_action_t *' (aka 'void (*)(void *)') converts to incompatible
function type [-Wcast-function-type-strict]
564 full_log = string_stream_get_string(test->log);
> 565 kunit_add_action(test, (kunit_action_t *)kfree, full_log);
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311070041.kWVYx7YP-lkp@intel.com/
Fixes: 05e2006ce493 ("kunit: Use string_stream for test log")
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Today we reset the suite counter as part of the suite cleanup,
called from the module exit callback, but it might not work that
well as one can try to collect results without unloading a previous
test (either unintentionally or due to dependencies).
For easy reproduction try to load the kunit-test.ko and then
collect and parse results from the kunit-example-test.ko load.
Parser will complain about mismatch of expected test number:
[ ] KTAP version 1
[ ] 1..1
[ ] # example: initializing suite
[ ] KTAP version 1
[ ] # Subtest: example
..
[ ] # example: pass:5 fail:0 skip:4 total:9
[ ] # Totals: pass:6 fail:0 skip:6 total:12
[ ] ok 7 example
[ ] [ERROR] Test: example: Expected test number 1 but found 7
[ ] ===================== [PASSED] example =====================
[ ] ============================================================
[ ] Testing complete. Ran 12 tests: passed: 6, skipped: 6, errors: 1
Since we are now printing suite test plan on every module load,
right before running suite tests, we should make sure that suite
counter will also start from 1. Easiest solution seems to be move
counter reset to the __kunit_test_suites_init() function.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Kunit recently gained support to setup attributes, the first one being
the speed of a given test, then allowing to filter out slow tests.
A slow test is defined in the documentation as taking more than one
second. There's an another speed attribute called "super slow" but whose
definition is less clear.
Add support to the test runner to check the test execution time, and
report tests that should be marked as slow but aren't.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Kernel test robot reported build warnings that structures g_ot_sync_ops,
g_ot_async_ops and g_testcases should be static. These definitions are
only used in test_objpool.c, so make them static
Link: https://lore.kernel.org/all/20231108012248.313574-1-wuqiang.matt@bytedance.com/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311071229.WGrWUjM1-lkp@intel.com/
Signed-off-by: wuqiang.matt <wuqiang.matt@bytedance.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Pull more bcachefs updates from Kent Overstreet:
"Here's the second big bcachefs pull request. This brings your tree up
to date with my master branch, which is what existing bcachefs users
are currently running.
New features:
- rebalance_work btree (and metadata version 1.3): the rebalance
thread no longer has to scan to find extents that need processing -
big scalability improvement.
- sb_errors superblock section: this adds counters for each fsck
error type, since filesystem creation, along with the date of the
most recent error. It'll get us better bug reports (since users do
not typically report errors that fsck was able to fix), and I might
add telemetry for this in the future.
Fixes include:
- multiple snapshot deletion fixes
- members_v2 fixups
- deleted_inodes btree fixes
- copygc thread no longer spins when a device is full but has no
fragmented buckets (i.e. rebalance needs to move data around
instead)
- a fix for a memory reclaim issue with the btree key cache: we're
now careful not to hold the srcu read lock that blocks key cache
reclaim for too long
- an early allocator locking fix, from Brian
- endianness fixes, from Brian
- CONFIG_BCACHEFS_DEBUG_TRANSACTIONS no longer defaults to y, a big
performance improvement on multithreaded workloads"
* tag 'bcachefs-2023-11-5' of https://evilpiepirate.org/git/bcachefs: (70 commits)
bcachefs: Improve stripe checksum error message
bcachefs: Simplify, fix bch2_backpointer_get_key()
bcachefs: kill thing_it_points_to arg to backpointer_not_found()
bcachefs: bch2_ec_read_extent() now takes btree_trans
bcachefs: bch2_stripe_to_text() now prints ptr gens
bcachefs: Don't iterate over journal entries just for btree roots
bcachefs: Break up bch2_journal_write()
bcachefs: Replace ERANGE with private error codes
bcachefs: bkey_copy() is no longer a macro
bcachefs: x-macro-ify inode flags enum
bcachefs: Convert bch2_fs_open() to darray
bcachefs: Move __bch2_members_v2_get_mut to sb-members.h
bcachefs: bch2_prt_datetime()
bcachefs: CONFIG_BCACHEFS_DEBUG_TRANSACTIONS no longer defaults to y
bcachefs: Add a comment for BTREE_INSERT_NOJOURNAL usage
bcachefs: rebalance_work btree is not a snapshots btree
bcachefs: Add missing printk newlines
bcachefs: Fix recovery when forced to use JSET_NO_FLUSH journal entry
bcachefs: .get_parent() should return an error pointer
bcachefs: Fix bch2_delete_dead_inodes()
...
|
|
Pull CXL (Compute Express Link) updates from Dan Williams:
"The main new functionality this time is work to allow Linux to
natively handle CXL link protocol errors signalled via PCIe AER for
current generation CXL platforms. This required some enlightenment of
the PCIe AER core to workaround the fact that current generation RCH
(Restricted CXL Host) platforms physically hide topology details and
registers via a mechanism called RCRB (Root Complex Register Block).
The next major highlight is reworks to address bugs in parsing region
configurations for next generation VH (Virtual Host) topologies. The
old broken algorithm is replaced with a simpler one that significantly
increases the number of region configurations supported by Linux. This
is again relevant for error handling so that forward and reverse
address translation of memory errors can be carried out by Linux for
memory regions instantiated by platform firmware.
As for other cross-tree work, the ACPI table parsing code has been
refactored for reuse parsing the "CDAT" structure which is an
ACPI-like data structure that is reported by CXL devices. That work is
in preparation for v6.8 support for CXL QoS. Think of this as dynamic
generation of NUMA node topology information generated by Linux rather
than platform firmware.
Lastly, a number of internal object lifetime issues have been resolved
along with misc. fixes and feature updates (decoders_committed sysfs
ABI).
Summary:
- Add support for RCH (Restricted CXL Host) Error recovery
- Fix several region assembly bugs
- Fix mem-device lifetime issues relative to the sanitize command and
RCH topology.
- Refactor ACPI table parsing for CDAT parsing re-use in preparation
for CXL QOS support"
* tag 'cxl-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (50 commits)
lib/fw_table: Remove acpi_parse_entries_array() export
cxl/pci: Change CXL AER support check to use native AER
cxl/hdm: Remove broken error path
cxl/hdm: Fix && vs || bug
acpi: Move common tables helper functions to common lib
cxl: Add support for reading CXL switch CDAT table
cxl: Add checksum verification to CDAT from CXL
cxl: Export QTG ids from CFMWS to sysfs as qos_class attribute
cxl: Add decoders_committed sysfs attribute to cxl_port
cxl: Add cxl_decoders_committed() helper
cxl/core/regs: Rework cxl_map_pmu_regs() to use map->dev for devm
cxl/core/regs: Rename phys_addr in cxl_map_component_regs()
PCI/AER: Unmask RCEC internal errors to enable RCH downstream port error handling
PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler
cxl/pci: Disable root port interrupts in RCH mode
cxl/pci: Add RCH downstream port error logging
cxl/pci: Map RCH downstream AER registers for logging protocol errors
cxl/pci: Update CXL error logging to use RAS register address
PCI/AER: Refactor cper_print_aer() for use by CXL driver module
cxl/pci: Add RCH downstream port AER register discovery
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for KVM running as a nested hypervisor under development
versions of PowerVM, using the new PAPR nested virtualisation API
- Add support for the BPF prog pack allocator
- A rework of the non-server MMU handling to support execute-only on
all platforms
- Some optimisations & cleanups for the powerpc qspinlock code
- Various other small features and fixes
Thanks to Aboorva Devarajan, Aditya Gupta, Amit Machhiwal, Benjamin
Gray, Christophe Leroy, Dr. David Alan Gilbert, Gaurav Batra, Gautam
Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Joel Stanley,
Jordan Niethe, Julia Lawall, Kautuk Consul, Kuan-Wei Chiu, Michael
Neuling, Minjie Du, Muhammad Muzammil, Naveen N Rao, Nicholas Piggin,
Nick Child, Nysal Jan K.A, Peter Lafreniere, Rob Herring, Sachin Sant,
Sebastian Andrzej Siewior, Shrikanth Hegde, Srikar Dronamraju, Stanislav
Kinsburskii, Vaibhav Jain, Wang Yufen, Yang Yingliang, and Yuan Tan.
* tag 'powerpc-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (100 commits)
powerpc/vmcore: Add MMU information to vmcoreinfo
Revert "powerpc: add `cur_cpu_spec` symbol to vmcoreinfo"
powerpc/bpf: use bpf_jit_binary_pack_[alloc|finalize|free]
powerpc/bpf: rename powerpc64_jit_data to powerpc_jit_data
powerpc/bpf: implement bpf_arch_text_invalidate for bpf_prog_pack
powerpc/bpf: implement bpf_arch_text_copy
powerpc/code-patching: introduce patch_instructions()
powerpc/32s: Implement local_flush_tlb_page_psize()
powerpc/pseries: use kfree_sensitive() in plpks_gen_password()
powerpc/code-patching: Perform hwsync in __patch_instruction() in case of failure
powerpc/fsl_msi: Use device_get_match_data()
powerpc: Remove cpm_dp...() macros
powerpc/qspinlock: Rename yield_propagate_owner tunable
powerpc/qspinlock: Propagate sleepy if previous waiter is preempted
powerpc/qspinlock: don't propagate the not-sleepy state
powerpc/qspinlock: propagate owner preemptedness rather than CPU number
powerpc/qspinlock: stop queued waiters trying to set lock sleepy
powerpc/perf: Fix disabling BHRB and instruction sampling
powerpc/trace: Add support for HAVE_FUNCTION_ARG_ACCESS_API
powerpc/tools: Pass -mabi=elfv2 to gcc-check-mprofile-kernel.sh
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Remove eventfs_file descriptor
This is the biggest change, and the second part of making eventfs
create its files dynamically.
In 6.6 the first part was added, and that maintained a one to one
mapping between eventfs meta descriptors and the directories and file
inodes and dentries that were dynamically created. The directories
were represented by a eventfs_inode and the files were represented by
a eventfs_file.
In v6.7 the eventfs_file is removed. As all events have the same
directory make up (sched_switch has an "enable", "id", "format", etc
files), the handing of what files are underneath each leaf eventfs
directory is moved back to the tracing subsystem via a callback.
When an event is added to the eventfs, it registers an array of
evenfs_entry's. These hold the names of the files and the callbacks
to call when the file is referenced. The callback gets the name so
that the same callback may be used by multiple files. The callback
then supplies the filesystem_operations structure needed to create
this file.
This has brought the memory footprint of creating multiple eventfs
instances down by 2 megs each!
- User events now has persistent events that are not associated to a
single processes. These are privileged events that hang around even
if no process is attached to them
- Clean up of seq_buf
There's talk about using seq_buf more to replace strscpy() and
friends. But this also requires some minor modifications of seq_buf
to be able to do this
- Expand instance ring buffers individually
Currently if boot up creates an instance, and a trace event is
enabled on that instance, the ring buffer for that instance and the
top level ring buffer are expanded (1.4 MB per CPU). This wastes
memory as this happens when nothing is using the top level instance
- Other minor clean ups and fixes
* tag 'trace-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (34 commits)
seq_buf: Export seq_buf_puts()
seq_buf: Export seq_buf_putc()
eventfs: Use simple_recursive_removal() to clean up dentries
eventfs: Remove special processing of dput() of events directory
eventfs: Delete eventfs_inode when the last dentry is freed
eventfs: Hold eventfs_mutex when calling callback functions
eventfs: Save ownership and mode
eventfs: Test for ei->is_freed when accessing ei->dentry
eventfs: Have a free_ei() that just frees the eventfs_inode
eventfs: Remove "is_freed" union with rcu head
eventfs: Fix kerneldoc of eventfs_remove_rec()
tracing: Have the user copy of synthetic event address use correct context
eventfs: Remove extra dget() in eventfs_create_events_dir()
tracing: Have trace_event_file have ref counters
seq_buf: Introduce DECLARE_SEQ_BUF and seq_buf_str()
eventfs: Fix typo in eventfs_inode union comment
eventfs: Fix WARN_ON() in create_file_dentry()
powerpc: Remove initialisation of readpos
tracing/histograms: Simplify last_cmd_set()
seq_buf: fix a misleading comment
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Another preparation step for introducing printk kthreads. The main
piece is a per-console lock with several features:
- Support three priorities: normal, emergency, and panic. They will
be defined by a context where the lock is taken. A context with a
higher priority is allowed to take over the lock from a context
with a lower one.
The plan is to use the emergency context for Oops and WARN()
messages, and also by watchdogs.
The panic() context will be used on panic CPU.
- The owner might enter/exit regions where it is not safe to take
over the lock. It allows the take over the lock a safe way in the
middle of a message.
For example, serial drivers emit characters one by one. And the
serial port is in a safe state in between.
Only the final console_flush_in_panic() will be allowed to take
over the lock even in the unsafe state (last chance, pray, and
hope).
- A higher priority context might busy wait with a timeout. The
current owner is informed about the waiter and releases the lock
on exit from the unsafe state.
- The new lock is safe even in atomic contexts, including NMI.
Another change is a safe manipulation of per-console sequence number
counter under the new lock.
- simple_strntoull() micro-optimization
- Reduce pr_flush() pooling time.
- Calm down false warning about possible buffer invalid access to
console buffers when CONFIG_PRINTK is disabled.
[ .. and Thomas Gleixner wants to point out that while several of the
commits are attributed to him, he only authored the early versions of
said commits, and that John Ogness and Petr Mladek have been the ones
who sorted out the details and really should be those who get the
credit - Linus ]
* tag 'printk-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
vsprintf: uninline simple_strntoull(), reorder arguments
printk: printk: Remove unnecessary statements＇len = 0;＇
printk: Reduce pr_flush() pooling time
printk: fix illegal pbufs access for !CONFIG_PRINTK
printk: nbcon: Allow drivers to mark unsafe regions and check state
printk: nbcon: Add emit function and callback function for atomic printing
printk: nbcon: Add sequence handling
printk: nbcon: Add ownership state functions
printk: nbcon: Add buffer management
printk: Make static printk buffers available to nbcon
printk: nbcon: Add acquire/release logic
printk: Add non-BKL (nbcon) console basic infrastructure
|
|
Pull bitmap updates from Yury Norov:
"This includes the 'bitmap: cleanup bitmap_*_region() implementation'
series, and scattered cleanup patches"
* tag 'bitmap-for-6.7' of https://github.com/norov/linux:
buildid: reduce header file dependencies for module
bitmap: move bitmap_*_region() functions to bitmap.h
bitmap: drop _reg_op() function
bitmap: replace _reg_op(REG_OP_ISFREE) with find_next_bit()
bitmap: replace _reg_op(REG_OP_RELEASE) with bitmap_clear()
bitmap: replace _reg_op(REG_OP_ALLOC) with bitmap_set()
bitmap: fix opencoded bitmap_allocate_region()
bitmap: add test for bitmap_*_region() functions
bitmap: align __reg_op() wrappers with modern coding style
lib/bitmap: split-out string-related operations to a separate files
bitmap: Remove dead code, i.e. bitmap_copy_le()
bitmap: Fix a typo ("identify map")
cpumask: kernel-doc cleanups and additions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"As usual, lots of singleton and doubleton patches all over the tree
and there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- 'kdump: use generic functions to simplify crashkernel reservation
in arch', from Baoquan He. This is mainly cleanups and
consolidation of the 'crashkernel=' kernel parameter handling
- After much discussion, David Laight's 'minmax: Relax type checks in
min() and max()' is here. Hopefully reduces some typecasting and
the use of min_t() and max_t()
- A group of patches from Oleg Nesterov which clean up and slightly
fix our handling of reads from /proc/PID/task/... and which remove
task_struct.thread_group"
* tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits)
scripts/gdb/vmalloc: disable on no-MMU
scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n
.mailmap: add address mapping for Tomeu Vizoso
mailmap: update email address for Claudiu Beznea
tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions
.mailmap: map Benjamin Poirier's address
scripts/gdb: add lx_current support for riscv
ocfs2: fix a spelling typo in comment
proc: test ProtectionKey in proc-empty-vm test
proc: fix proc-empty-vm test with vsyscall
fs/proc/base.c: remove unneeded semicolon
do_io_accounting: use sig->stats_lock
do_io_accounting: use __for_each_thread()
ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error()
ocfs2: fix a typo in a comment
scripts/show_delta: add __main__ judgement before main code
treewide: mark stuff as __ro_after_init
fs: ocfs2: check status values
proc: test /proc/${pid}/statm
compiler.h: move __is_constexpr() to compiler.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series 'Fixes and cleanups to compaction'
- Joel Fernandes has a patchset ('Optimize mremap during mutual
alignment within PMD') which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i
the following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series 'Do not try to access unaccepted memory' Adrian
Hunter provides some fixups for the recently-added 'unaccepted
memory' feature. To increase the feature's checking coverage. 'Plug
a few gaps where RAM is exposed without checking if it is
unaccepted memory'
- In the series 'cleanups for lockless slab shrink' Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series 'use refcount+RCU method to
implement lockless slab shrink'
- David Hildenbrand contributes some maintenance work for the rmap
code in the series 'Anon rmap cleanups'
- Kefeng Wang does more folio conversions and some maintenance work
in the migration code. Series 'mm: migrate: more folio conversion
and unification'
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series 'Add and use bdev_getblk()'
- In the series 'Use nth_page() in place of direct struct page
manipulation' Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames
- In the series 'mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO' has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of
gigantic pages are in use
- Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code
rationalization and folio conversions in the hugetlb code
- Yin Fengwei has improved mlock()'s handling of large folios in the
series 'support large folio for mlock'
- In the series 'Expose swapcache stat for memcg v1' Liu Shixin has
added statistics for memcg v1 users which are available (and
useful) under memcg v2
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named 'MDWE
without inheritance'
- Kefeng Wang has provided the series 'mm: convert numa balancing
functions to use a folio' which does what it says
- In the series 'mm/ksm: add fork-exec support for prctl' Stefan
Roesch makes is possible for a process to propagate KSM treatment
across exec()
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use 'high
bandwidth memory' in addition to Optane Data Center Persistent
Memory Modules (DCPMM). The series is named 'memory tiering:
calculate abstract distance based on ACPI HMAT'
- In the series 'Smart scanning mode for KSM' Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in
the series 'mm: memcg: fix tracking of pending stats updates
values'
- In the series 'Implement IOCTL to get and optionally clear info
about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap
which permits us to atomically read-then-clear page softdirty
state. This is mainly used by CRIU
- Hugh Dickins contributed the series 'shmem,tmpfs: general
maintenance', a bunch of relatively minor maintenance tweaks to
this code
- Matthew Wilcox has increased the use of the VMA lock over
file-backed page faults in the series 'Handle more faults under the
VMA lock'. Some rationalizations of the fault path became possible
as a result
- In the series 'mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()' David Hildenbrand has implemented some
cleanups and folio conversions
- In the series 'various improvements to the GUP interface' Lorenzo
Stoakes has simplified and improved the GUP interface with an eye
to providing groundwork for future improvements
- Andrey Konovalov has sent along the series 'kasan: assorted fixes
and improvements' which does those things
- Some page allocator maintenance work from Kemeng Shi in the series
'Two minor cleanups to break_down_buddy_pages'
- In thes series 'New selftest for mm' Breno Leitao has developed
another MM self test which tickles a race we had between madvise()
and page faults
- In the series 'Add folio_end_read' Matthew Wilcox provides cleanups
and an optimization to the core pagecache code
- Nhat Pham has added memcg accounting for hugetlb memory in the
series 'hugetlb memcg accounting'
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series 'Abstract vma_merge() and split_vma()'
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series 'Fix page_owner's use of free timestamps'
- Lorenzo Stoakes has fixed the handling of new mappings of sealed
files in the series 'permit write-sealed memfd read-only shared
mappings'
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series 'Batch hugetlb vmemmap modification operations'
- Some buffer_head folio conversions and cleanups from Matthew Wilcox
in the series 'Finish the create_empty_buffers() transition'
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the
series 'mm: PCP high auto-tuning'
- Roman Gushchin has contributed the patchset 'mm: improve
performance of accounted kernel memory allocations' which improves
their performance by ~30% as measured by a micro-benchmark
- folio conversions from Kefeng Wang in the series 'mm: convert page
cpupid functions to folios'
- Some kmemleak fixups in Liu Shixin's series 'Some bugfix about
kmemleak'
- Qi Zheng has improved our handling of memoryless nodes by keeping
them off the allocation fallback list. This is done in the series
'handle memoryless nodes more appropriately'
- khugepaged conversions from Vishal Moola in the series 'Some
khugepaged folio conversions'"
[ bcachefs conflicts with the dynamically allocated shrinkers have been
resolved as per Stephen Rothwell in
https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/
with help from Qi Zheng.
The clone3 test filtering conflict was half-arsed by yours truly ]
* tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits)
mm/damon/sysfs: update monitoring target regions for online input commit
mm/damon/sysfs: remove requested targets when online-commit inputs
selftests: add a sanity check for zswap
Documentation: maple_tree: fix word spelling error
mm/vmalloc: fix the unchecked dereference warning in vread_iter()
zswap: export compression failure stats
Documentation: ubsan: drop "the" from article title
mempolicy: migration attempt to match interleave nodes
mempolicy: mmap_lock is not needed while migrating folios
mempolicy: alloc_pages_mpol() for NUMA policy without vma
mm: add page_rmappable_folio() wrapper
mempolicy: remove confusing MPOL_MF_LAZY dead code
mempolicy: mpol_shared_policy_init() without pseudo-vma
mempolicy trivia: use pgoff_t in shared mempolicy tree
mempolicy trivia: slightly more consistent naming
mempolicy trivia: delete those ancient pr_debug()s
mempolicy: fix migrate_pages(2) syscall return nr_failed
kernfs: drop shared NUMA mempolicy hooks
hugetlbfs: drop shared NUMA mempolicy pretence
mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()
...
|
|
Stephen reports that the ACPI helper library rework,
CONFIG_FIRMWARE_TABLE, introduces a new compiler warning:
WARNING: modpost: vmlinux: acpi_parse_entries_array: EXPORT_SYMBOL used
for init symbol. Remove __init or EXPORT_SYMBOL.
Delete this export as it turns out it is unneeded, and future work wraps
this in another exported helper. Note that in general
EXPORT_SYMBOL_ACPI_LIB() is needed for exporting symbols that are marked
__init_or_acpilib, but in this case no export is required.
Fixes: a103f46633fd ("acpi: Move common tables helper functions to common lib")
Cc: Dave Jiang <dave.jiang@intel.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: http://lore.kernel.org/r/20231030160523.670a7569@canb.auug.org.au
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/169896282222.70775.940454758280866379.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Mark seq_buf_puts() which is part of the seq_buf API to be exported to
kernel loadable GPL modules.
Link: https://lkml.kernel.org/r/b9e3737f66ec2450221b492048ce0d9c65c84953.1698861216.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Mark seq_buf_putc() which is part of the seq_buf API to be exported to
kernel loadable GPL modules.
Link: https://lkml.kernel.org/r/5c9a5ed97ac37dbdcd9c1e7bcbdec9ac166e79be.1698861216.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- string-stream testing enhancements
- several fixes memory leaks
- fix to reset status during parameter handling
* tag 'linux_kselftest-kunit-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: test: Fix the possible memory leak in executor_test
kunit: Fix possible memory leak in kunit_filter_suites()
kunit: Fix the wrong kfree of copy for kunit_filter_suites()
kunit: Fix missed memory release in kunit_free_suite_set()
kunit: Reset test status on each param iteration
kunit: string-stream: Test performance of string_stream
kunit: Use string_stream for test log
kunit: string-stream: Add tests for freeing resource-managed string_stream
kunit: string-stream: Decouple string_stream from kunit
kunit: string-stream: Add kunit_alloc_string_stream()
kunit: Don't use a managed alloc in is_literal()
kunit: string-stream-test: Add cases for string_stream newline appending
kunit: string-stream: Add option to make all lines end with newline
kunit: string-stream: Improve testing of string_stream
kunit: string-stream: Don't create a fragment for empty strings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
"Cleanups:
- kprobes: Fixes typo in kprobes samples
- tracing/eprobes: Remove 'break' after return
kretprobe/fprobe performance improvements:
- lib: Introduce new `objpool`, which is a high performance lockless
object queue. This uses per-cpu ring array to allocate/release
objects from the pre-allocated object pool.
Since the index of ring array is a 32bit sequential counter, we can
retry to push/pop the object pointer from the ring without lock (as
seq-lock does)
- lib: Add an objpool test module to test the functionality and
evaluate the performance under some circumstances
- kprobes/fprobe: Improve kretprobe and rethook scalability
performance with objpool.
This improves both legacy kretprobe and fprobe exit handler (which
is based on rethook) to be scalable on SMP systems. Even with
8-threads parallel test, it shows a great scalability improvement
- Remove unneeded freelist.h which is replaced by objpool
- objpool: Add maintainers entry for the objpool
- objpool: Fix to remove unused include header lines"
* tag 'probes-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobes: unused header files removed
MAINTAINERS: objpool added
kprobes: freelist.h removed
kprobes: kretprobe scalability improvement
lib: objpool test module added
lib: objpool added: ring-array based lockless MPMC
tracing/eprobe: drop unneeded breaks
samples: kprobes: Fixes a typo
|
