summaryrefslogtreecommitdiff
path: root/net/mac80211/scan.c
AgeCommit message (Collapse)Author
2025-06-05wifi: cfg80211/mac80211: correctly parse S1G beacon optional elementsLachlan Hodges
S1G beacons are not traditional beacons but a type of extension frame. Extension frames contain the frame control and duration fields, followed by zero or more optional fields before the frame body. These optional fields are distinct from the variable length elements. The presence of optional fields is indicated in the frame control field. To correctly locate the elements offset, the frame control must be parsed to identify which optional fields are present. Currently, mac80211 parses S1G beacons based on fixed assumptions about the frame layout, without inspecting the frame control field. This can result in incorrect offsets to the "variable" portion of the frame. Properly parse S1G beacon frames by using the field lengths defined in IEEE 802.11-2024, section 9.3.4.3, ensuring that the elements offset is calculated accurately. Fixes: 9eaffe5078ca ("cfg80211: convert S1G beacon to scan results") Fixes: cd418ba63f0c ("mac80211: convert S1G beacon to scan results") Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com> Link: https://patch.msgid.link/20250603053538.468562-1-lachlan.hodges@morsemicro.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-05-21wifi: mac80211: accept probe response on link address as wellAditya Kumar Singh
If a random MAC address is not requested during scan request, unicast probe response frames are only accepted if the destination address matches the interface address. This works fine for non-ML interfaces. However, with MLO, the same interface can have multiple links, and a scan on a link would be requested with the link address. In such cases, the probe response frame gets dropped which is incorrect. Therefore, add logic to check if any of the link addresses match the destination address if the interface address does not match. Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250516-bug_fix_mlo_scan-v2-2-12e59d9110ac@oss.qualcomm.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-10-23wifi: mac80211: use vif radio mask to limit ibss scan frequenciesFelix Fietkau
Reject frequencies not supported by any radio that the vif is allowed to use. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://patch.msgid.link/9d5c0b6b00a7ecef6a0ac6de765c0af00c8bb0e1.1728462320.git-series.nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-09-06wifi: cfg80211/mac80211: use proper link ID for DFSAditya Kumar Singh
Now that all APIs have support to handle DFS per link, use proper link ID instead of 0. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20240906064426.2101315-8-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-09-06wifi: cfg80211: move DFS related members to links[] in wireless_devAditya Kumar Singh
A few members related to DFS handling are currently under per wireless device data structure. However, in order to support DFS with MLO, there is a need to have them on a per-link manner. Hence, as a preliminary step, move members cac_started, cac_start_time and cac_time_ms to be on a per-link basis. Since currently, link ID is not known at all places, use default value of 0 for now. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20240906064426.2101315-5-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-28wifi: mac80211: scan: Use max macroYan Zhen
When the original file is guaranteed to contain the minmax.h header file and compile correctly, using the real macro is usually more intuitive and readable. Signed-off-by: Yan Zhen <yanzhen@vivo.com> Link: https://patch.msgid.link/20240827103012.3853588-1-yanzhen@vivo.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-28wifi: mac80211: fix RCU list iterationsJohannes Berg
There are a number of places where RCU list iteration is used, but that aren't (always) called with RCU held. Use just list_for_each_entry() in most, and annotate iface iteration with the required locks. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240827094939.ed8ac0b2f897.I8443c9c3c0f8051841353491dae758021b53115e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-08-27wifi: mac80211: don't use rate mask for offchannel TX eitherPing-Ke Shih
Like the commit ab9177d83c04 ("wifi: mac80211: don't use rate mask for scanning"), ignore incorrect settings to avoid no supported rate warning reported by syzbot. The syzbot did bisect and found cause is commit 9df66d5b9f45 ("cfg80211: fix default HE tx bitrate mask in 2G band"), which however corrects bitmask of HE MCS and recognizes correctly settings of empty legacy rate plus HE MCS rate instead of returning -EINVAL. As suggestions [1], follow the change of SCAN TX to consider this case of offchannel TX as well. [1] https://lore.kernel.org/linux-wireless/6ab2dc9c3afe753ca6fdcdd1421e7a1f47e87b84.camel@sipsolutions.net/T/#m2ac2a6d2be06a37c9c47a3d8a44b4f647ed4f024 Reported-by: syzbot+8dd98a9e98ee28dc484a@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-wireless/000000000000fdef8706191a3f7b@google.com/ Fixes: 9df66d5b9f45 ("cfg80211: fix default HE tx bitrate mask in 2G band") Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240729074816.20323-1-pkshih@realtek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-14wifi: mac80211: Avoid address calculations via out of bounds array indexingKenton Groombridge
req->n_channels must be set before req->channels[] can be used. This patch fixes one of the issues encountered in [1]. [ 83.964255] UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:364:4 [ 83.964258] index 0 is out of range for type 'struct ieee80211_channel *[]' [...] [ 83.964264] Call Trace: [ 83.964267] <TASK> [ 83.964269] dump_stack_lvl+0x3f/0xc0 [ 83.964274] __ubsan_handle_out_of_bounds+0xec/0x110 [ 83.964278] ieee80211_prep_hw_scan+0x2db/0x4b0 [ 83.964281] __ieee80211_start_scan+0x601/0x990 [ 83.964291] nl80211_trigger_scan+0x874/0x980 [ 83.964295] genl_family_rcv_msg_doit+0xe8/0x160 [ 83.964298] genl_rcv_msg+0x240/0x270 [...] [1] https://bugzilla.kernel.org/show_bug.cgi?id=218810 Co-authored-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <kees@kernel.org> Signed-off-by: Kenton Groombridge <concord@gentoo.org> Link: https://msgid.link/20240605152218.236061-1-concord@gentoo.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: mac80211: fix UBSAN noise in ieee80211_prep_hw_scan()Dmitry Antipov
When testing the previous patch with CONFIG_UBSAN_BOUNDS, I've noticed the following: UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:372:4 index 0 is out of range for type 'struct ieee80211_channel *[]' CPU: 0 PID: 1435 Comm: wpa_supplicant Not tainted 6.9.0+ #1 Hardware name: LENOVO 20UN005QRT/20UN005QRT <...BIOS details...> Call Trace: <TASK> dump_stack_lvl+0x2d/0x90 __ubsan_handle_out_of_bounds+0xe7/0x140 ? timerqueue_add+0x98/0xb0 ieee80211_prep_hw_scan+0x2db/0x480 [mac80211] ? __kmalloc+0xe1/0x470 __ieee80211_start_scan+0x541/0x760 [mac80211] rdev_scan+0x1f/0xe0 [cfg80211] nl80211_trigger_scan+0x9b6/0xae0 [cfg80211] ...<the rest is not too useful...> Since '__ieee80211_start_scan()' leaves 'hw_scan_req->req.n_channels' uninitialized, actual boundaries of 'hw_scan_req->req.channels' can't be checked in 'ieee80211_prep_hw_scan()'. Although an initialization of 'hw_scan_req->req.n_channels' introduces some confusion around allocated vs. used VLA members, this shouldn't be a problem since everything is correctly adjusted soon in 'ieee80211_prep_hw_scan()'. Cleanup 'kmalloc()' math in '__ieee80211_start_scan()' by using the convenient 'struct_size()' as well. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Link: https://msgid.link/20240517153332.18271-2-dmantipov@yandex.ru [improve (imho) indentation a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/ti/icssg/icssg_prueth.c net/mac80211/chan.c 89884459a0b9 ("wifi: mac80211: fix idle calculation with multi-link") 87f5500285fb ("wifi: mac80211: simplify ieee80211_assign_link_chanctx()") https://lore.kernel.org/all/20240422105623.7b1fbda2@canb.auug.org.au/ net/unix/garbage.c 1971d13ffa84 ("af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc().") 4090fa373f0e ("af_unix: Replace garbage collection algorithm.") drivers/net/ethernet/ti/icssg/icssg_prueth.c drivers/net/ethernet/ti/icssg/icssg_common.c 4dcd0e83ea1d ("net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()") e2dc7bfd677f ("net: ti: icssg-prueth: Move common functions into a separate file") No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-08wifi: mac80211: don't use rate mask for scanningJohannes Berg
The rate mask is intended for use during operation, and can be set to only have masks for the currently active band. As such, it cannot be used for scanning which can be on other bands as well. Simply ignore the rate masks during scanning to avoid warnings from incorrect settings. Reported-by: syzbot+fdc5123366fb9c3fdc6d@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=fdc5123366fb9c3fdc6d Co-developed-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Tested-by: Dmitry Antipov <dmantipov@yandex.ru> Link: https://msgid.link/20240326220854.9594cbb418ca.I7f86c0ba1f98cf7e27c2bacf6c2d417200ecea5c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-25wifi: mac80211: don't select link ID if not provided in scan requestAyala Beker
If scan request doesn't include a link ID to be used for TSF reporting, don't select it as it might become inactive before scan is actually started by the driver. Instead, let the driver select one of the active links. Fixes: cbde0b49f276 ("wifi: mac80211: Extend support for scanning while MLO connected") Signed-off-by: Ayala Beker <ayala.beker@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240320091155.a6b643a15755.Ic28ed9a611432387b7f85e9ca9a97a4ce34a6e0f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04wifi: mac80211: Allow beacons to update BSS table regardless of scanIlan Peer
When a beacon is received use it to update the BSS table regardless of the scanning state. Do so only when there are active non-monitor interfaces. Also, while at it, in any case accept beacons only with broadcast address. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Link: https://msgid.link/20240228094742.e508605f495b.I3ab24ab3543319e31165111b28bcdcc622b5cf02@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: mac80211: start building elements in SKBsJohannes Berg
The building of elements is really mess, and really the only reason we're not doing it in SKBs in the first place is that the scan code in ieee80211_build_preq_ies() doesn't. Convert ieee80211_build_preq_ies() to use an SKB internally so that we can gradually convert other things to ..._put_*() style interfaces. Link: https://msgid.link/20240129202041.c3a8e3c2cc99.I9d9920858c30ae5154719783933de0d7bc2a2cb9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: mac80211: simplify non-chanctx driversJohannes Berg
There are still surprisingly many non-chanctx drivers, but in mac80211 that code is a bit awkward. Simplify this by having those drivers assign 'emulated' ops, so that the mac80211 code can be more unified between non-chanctx/chanctx drivers. This cuts the number of places caring about it by about 15, which are scattered across - now they're fewer and no longer in the channel context handling. Link: https://msgid.link/20240129194108.6d0ead50f5cf.I60d093b2fc81ca1853925a4d0ac3a2337d5baa5b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08Merge wireless into wireless-nextJohannes Berg
There are some changes coming to wireless-next that will otherwise cause conflicts, pull wireless in first to be able to resolve that when applying the individual changes rather than having to do merge resolution later. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02wifi: mac80211: accept broadcast probe responses on 6 GHzJohannes Berg
On the 6 GHz band, probe responses are sent as broadcast to optimise medium usage. However, without OCE configuration we weren't accepting them, which is wrong, even if wpa_s is by default enabling OCE. Accept them without the OCE config as well. Link: https://msgid.link/20240129200907.5a89c2821897.I92e9dfa0f9b350bc7f37dd4bb38031d156d78d8a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-26wifi: mac80211: apply duration for SW scanMichael-CY Lee
This patch makes duration in scan request be applicable when using SW scan, but only accepts durations greater than the default value for the following reasons: 1. Most APs have a beacoon interval of 100ms. 2. Sending and receiving probe require some delay. 3. Setting channel to HW also requires some delays Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com> Link: https://msgid.link/20240123054752.22833-1-michael-cy.lee@mediatek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-12-12wifi: mac80211: Replace ENOTSUPP with EOPNOTSUPPAndrei Otcheretianski
ENOTSUP isn't a standard error code. EOPNOTSUPP should be used instead. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231211085121.3841b71c867d.Idf2ad01d9dfe8d6d6c352bf02deb06e49701ad1d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-11-24wifi: mac80211: Extend support for scanning while MLO connectedIlan Peer
- If the scan request includes a link ID, validate that it is one of the active links. Otherwise, if the scan request doesn't include a valid link ID, select one of the active links. - When reporting the TSF for a BSS entry, use the link ID information from the Rx status or the scan request to set the parent BSSID. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231113112844.68564692c404.Iae9605cbb7f9d52e00ce98260b3559a34cf18341@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-13wifi: cfg80211: remove scan_width supportJohannes Berg
There really isn't any support for scanning at different channel widths than 20 MHz since there's no way to set it. Remove this support for now, if somebody wants to maintain this whole thing later we can revisit how it should work. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: reduce iflist_mtxJohannes Berg
We now hold the wiphy mutex everywhere that we use or needed the iflist_mtx, so we don't need this mutex any more in mac80211. However, drivers may also iterate, and in some cases (e.g. mt76) do so from high-priority contexts. Thus, keep the mutex around but remove its usage in mac80211 apart from those driver-visible parts that are still needed. Most of this change was done automatically with spatch, with the parts that are still needed as described above reverted manually. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: remove local->mtxJohannes Berg
We now hold the wiphy mutex everywhere that we use or needed the local->mtx, so we don't need this mutex any more. Remove it. Most of this change was done automatically with spatch. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: move sched-scan stop work to wiphy workJohannes Berg
This also has the wiphy locked here then. We need to use the _locked version of cfg80211_sched_scan_stopped() now, which also fixes an old deadlock there. Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: mac80211: move scan work to wiphy workJohannes Berg
Move the scan work to wiphy work, which also simplifies the way we handle the work vs. the scan configuration. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: mac80211: use new inform_bss callbackBenjamin Berg
Doing this simplifies the code somewhat, as iteration over the nontransmitted BSSs is not required anymore. Also, mac80211 should not be iterating over the nontrans_list as it should only be accessed while the bss_lock is held. It also simplifies parsing of the IEs somewhat, as cfg80211 already extracts the IEs and passes them to the callback. Note that the only user left requiring parsing a specific BSS is the association code if a beacon is required by the hardware. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230616094949.39ebfe2f9e59.Ia012b08e0feed8ec431b666888b459f6366f7bd1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-07wifi: mac80211: use wiphy work for sdata->workJohannes Berg
We'll need this later to convert other works that might be cancelled from here, so convert this one first. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: mac80211: adjust scan cancel comment/checkJohannes Berg
Instead of the comment about holding RTNL, which is now wrong, add a proper lockdep assertion for the wiphy mutex. Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.84352e46f342.Id90fef8c581cebe19cb30274340cf43885d55c74@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-11treewide: use get_random_{u8,u16}() when possible, part 1Jason A. Donenfeld
Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value, simply use the get_random_{u8,u16}() functions, which are faster than wasting the additional bytes from a 32-bit value. This was done mechanically with this coccinelle script: @@ expression E; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; typedef __be16; typedef __le16; typedef u8; @@ ( - (get_random_u32() & 0xffff) + get_random_u16() | - (get_random_u32() & 0xff) + get_random_u8() | - (get_random_u32() % 65536) + get_random_u16() | - (get_random_u32() % 256) + get_random_u8() | - (get_random_u32() >> 16) + get_random_u16() | - (get_random_u32() >> 24) + get_random_u8() | - (u16)get_random_u32() + get_random_u16() | - (u8)get_random_u32() + get_random_u8() | - (__be16)get_random_u32() + (__be16)get_random_u16() | - (__le16)get_random_u32() + (__le16)get_random_u16() | - prandom_u32_max(65536) + get_random_u16() | - prandom_u32_max(256) + get_random_u8() | - E->inet_id = get_random_u32() + E->inet_id = get_random_u16() ) @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; identifier v; @@ - u16 v = get_random_u32(); + u16 v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; identifier v; @@ - u8 v = get_random_u32(); + u8 v = get_random_u8(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; u16 v; @@ - v = get_random_u32(); + v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; u8 v; @@ - v = get_random_u32(); + v = get_random_u8(); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Examine limits @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value < 256: coccinelle.RESULT = cocci.make_ident("get_random_u8") elif value < 65536: coccinelle.RESULT = cocci.make_ident("get_random_u16") else: print("Skipping large mask of %s" % (literal)) cocci.include_match(False) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; identifier add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + (RESULT() & LITERAL) Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-09-04Merge tag 'wireless-next-2022-09-03' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== drivers - rtw89: large update across the map, e.g. coex, pci(e), etc. - ath9k: uninit memory read fix - ath10k: small peer map fix and a WCN3990 device fix - wfx: underflow stack - the "change MAC address while IFF_UP" change from James we discussed - more MLO work, including a set of fixes for the previous code, now that we have more code we can exercise it more - prevent some features with MLO that aren't ready yet (AP_VLAN and 4-address connections) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-03wifi: mac80211: fix double SW scan stopJohannes Berg
When we stop a not-yet-started scan, we erroneously call into the driver, causing a sequence of sw_scan_start() followed by sw_scan_complete() twice. This will cause a warning in hwsim with next in line commit that validates the address passed to wmediumd/virtio. Fix this by doing the calls only if we were actually scanning. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: mac80211: Fix UAF in ieee80211_scan_rx()Siddh Raman Pant
ieee80211_scan_rx() tries to access scan_req->flags after a null check, but a UAF is observed when the scan is completed and __ieee80211_scan_completed() executes, which then calls cfg80211_scan_done() leading to the freeing of scan_req. Since scan_req is rcu_dereference()'d, prevent the racing in __ieee80211_scan_completed() by ensuring that from mac80211's POV it is no longer accessed from an RCU read critical section before we call cfg80211_scan_done(). Cc: stable@vger.kernel.org Link: https://syzkaller.appspot.com/bug?extid=f9acff9bf08a845f225d Reported-by: syzbot+f9acff9bf08a845f225d@syzkaller.appspotmail.com Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Siddh Raman Pant <code@siddh.me> Link: https://lore.kernel.org/r/20220819200340.34826-1-code@siddh.me Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: fix multi-BSSID element parsingJohannes Berg
When parsing a frame containing a multi-BSSID element, we need to know both the transmitted and non-transmitted BSSID so we can parse it correctly. Unfortunately, in quite a number of cases, we got this wrong and were passing the wrong BSSID or useless information: * the mgmt->bssid from a frame is only the transmitted BSSID if the frame is a beacon * passing just one of the parameters as non-NULL isn't useful and ignored In those case where we need to parse for a specific BSS we always have a BSS structure pointer, representing the BSS we need, whether transmitted or not. Thus, pass that pointer to the parsing function instead of the two BSSIDs. Also fix two bugs: * we need to re-parse all the elements for the other BSS when iterating the non-transmitted BSSes in scan * we need to parse for the correct BSS when setting up the channel data in client code Fixes: 78ac51f81532 ("mac80211: support multi-bssid") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: move interface config to new structJohannes Berg
We'll use bss_conf for per-link configuration later, so move out all the non-link-specific data out into a new struct ieee80211_vif_cfg used in the vif. Some adjustments were done with the following spatch: @@ expression sdata; struct ieee80211_vif *vifp; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ ( -sdata->vif.bss_conf.var +sdata->vif.cfg.var | -vifp->bss_conf.var +vifp->cfg.var ) @bss_conf@ struct ieee80211_bss_conf *bss_conf; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ -bss_conf->var +vif_cfg->var (though more manual fixups were needed, e.g. replacing "vif_cfg->" by "vif->cfg." in many files.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-05-04mac80211: upgrade passive scan to active scan on DFS channels after beacon rxFelix Fietkau
In client mode, we can't connect to hidden SSID APs or SSIDs not advertised in beacons on DFS channels, since we're forced to passive scan. Fix this by sending out a probe request immediately after the first beacon, if active scan was requested by the user. Cc: stable@vger.kernel.org Reported-by: Catrinel Catrinescu <cc@80211.de> Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20220420104907.36275-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-09-23mac80211: always allocate struct ieee802_11_elemsJohannes Berg
As the 802.11 spec evolves, we need to parse more and more elements. This is causing the struct to grow, and we can no longer get away with putting it on the stack. Change the API to always dynamically allocate and return an allocated pointer that must be kfree()d later. As an alternative, I contemplated a scheme whereby we'd say in the code which elements we needed, e.g. DECLARE_ELEMENT_PARSER(elems, SUPPORTED_CHANNELS, CHANNEL_SWITCH, EXT(KEY_DELIVERY)); ieee802_11_parse_elems(..., &elems, ...); and while I think this is possible and will save us a lot since most individual places only care about a small subset of the elements, it ended up being a bit more work since a lot of places do the parsing and then pass the struct to other functions, sometimes with multiple levels. Link: https://lore.kernel.org/r/20210920154009.26caff6b5998.I05ae58768e990e611aee8eca8abefd9d7bc15e05@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-05-31mac80211: fix skb length check in ieee80211_scan_rx()Du Cheng
Replace hard-coded compile-time constants for header length check with dynamic determination based on the frame type. Otherwise, we hit a validation WARN_ON in cfg80211 later. Fixes: cd418ba63f0c ("mac80211: convert S1G beacon to scan results") Reported-by: syzbot+405843667e93b9790fc1@syzkaller.appspotmail.com Signed-off-by: Du Cheng <ducheng2@gmail.com> Link: https://lore.kernel.org/r/20210510041649.589754-1-ducheng2@gmail.com [style fixes, reword commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: convert S1G beacon to scan resultsThomas Pedersen
This commit finds the correct offset for Information Elements in S1G beacon frames so they can be reported in scan results. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-8-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28mac80211: s1g: choose scanning width based on frequencyThomas Pedersen
An S1G BSS can beacon at either 1 or 2 MHz and the channel width is unique to a given frequency. Ignore scan channel width for now and use the allowed channel width. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200922022818.15855-3-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-28nl80211/cfg80211: support 6 GHz scanningTova Mussai
Support 6 GHz scanning, by * a new scan flag to scan for colocated BSSes advertised by (and found) APs on 2.4 & 5 GHz * doing the necessary reduced neighbor report parsing for this, to find them * adding the ability to split the scan request in case the device by itself cannot support this. Also add some necessary bits in mac80211 to not break with these changes. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200918113313.232917c93af9.Ida22f0212f9122f47094d81659e879a50434a6a2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-31mac80211: remove unused flags argument in transmit functionsMathy Vanhoef
The flags argument in transmit functions is no longer being used and can be removed. Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be> Link: https://lore.kernel.org/r/20200723100153.31631-5-Mathy.Vanhoef@kuleuven.be Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-31mac80211: use same flag everywhere to avoid sequence number overwriteMathy Vanhoef
Use the IEEE80211_TX_CTRL_NO_SEQNO flag in ieee80211_tx_info to mark probe requests whose sequence number must not be overwritten. This provides consistency with the radiotap flag that can be set to indicate that the sequence number of an injected frame should not be overwritten. Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be> Link: https://lore.kernel.org/r/20200723100153.31631-4-Mathy.Vanhoef@kuleuven.be Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-31nl80211: S1G band and channel definitionsThomas Pedersen
Gives drivers the definitions needed to advertise support for S1G bands. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200602062247.23212-1-thomas@adapt-ip.com Link: https://lore.kernel.org/r/20200731055636.795173-1-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: Add HE 6GHz capabilities element to probe requestIlan Peer
On 6 GHz, the 6 GHz capabilities element should be added, do that. Signed-off-by: Ilan Peer <ilan.peer@intel.com> [add commit message] Link: https://lore.kernel.org/r/20200528213443.8ee764f0cde0.I2b0c66b60e11818c97c9803e04a6a197c6376243@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: avoid using ext NSS high BW if not supportedJohannes Berg
If the AP advertises inconsistent data, namely it has CCFS1 or CCFS2, but doesn't advertise support for 160/80+80 bandwidth or "Extended NSS BW Support", then we cannot use any MCSes in the the higher bandwidth. Thus, avoid connecting with higher bandwidth since it's less efficient that way. Link: https://lore.kernel.org/r/20200528213443.0e55d40c3ccc.I6fd0b4708ebd087e5e46466c3e91f6efbcbef668@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24mac80211: add freq_offset to RX statusThomas Pedersen
RX status needs a KHz component, so add freq_offset. We can reduce the bits for the frequency since 60 GHz isn't supported. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200402011810.22947-5-thomas@adapt-ip.com [fix commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24mac80211: handle channel frequency offsetThomas Pedersen
cfg80211_chan_def and ieee80211_channel recently gained a frequency offset component. Handle this where it makes sense (potentially required by S1G channels). For IBSS, TDLS, CSA, and ROC we return -EOPNOTSUPP if a channel with frequency offset is passed, since they may or may not work. Once someone tests and verifies these commands work on thos types of channels, we can remove that error. join_ocb and join_mesh look harmless because they use a simple ieee80211_vif_use_channel(), which is using an already verified channel, so we let those through. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200402011810.22947-4-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-21cfg80211: remove support for adjacent channel compensationEmmanuel Grumbach
The only driver that used that was iwlwifi and it removed support for this. Remove the feature here as well. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20200214232336.a530de38e511.I393bc395f6037c8cca6421ed550e3072dc248aed@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-10-07mac80211: fix scan when operating on DFS channels in ETSI domainsAaron Komisar
In non-ETSI regulatory domains scan is blocked when operating channel is a DFS channel. For ETSI, however, once DFS channel is marked as available after the CAC, this channel will remain available (for some time) even after leaving this channel. Therefore a scan can be done without any impact on the availability of the DFS channel as no new CAC is required after the scan. Enable scan in mac80211 in these cases. Signed-off-by: Aaron Komisar <aaron.komisar@tandemg.com> Link: https://lore.kernel.org/r/1570024728-17284-1-git-send-email-aaron.komisar@tandemg.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.46.0) at 2025-07-25 20:34:46 +0000