| Age | Commit message (Collapse) | Author |
|---|
|
Linus observed that the pervasive passing of selinux_state pointers
introduced by me in commit aa8e712cee93 ("selinux: wrap global selinux
state") adds overhead and complexity without providing any
benefit. The original idea was to pave the way for SELinux namespaces
but those have not yet been implemented and there isn't currently
a concrete plan to do so. Remove the passing of the selinux_state
pointers, reverting to direct use of the single global selinux_state,
and likewise remove passing of child pointers like the selinux_avc.
The selinux_policy pointer remains as it is needed for atomic switching
of policies.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202303101057.mZ3Gv5fK-lkp@intel.com/
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Remove 'integrity' from the list of LSMs in Kconfig, as it is no longer
necessary. Since the recent change (set order to LSM_ORDER_LAST), the
'integrity' LSM is always enabled (if selected in the kernel
configuration).
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
With the recent introduction of LSM_ORDER_LAST, the 'integrity' LSM is
always initialized (if selected in the kernel configuration) and the
iint_cache is always created (the kernel panics on error). Thus, the
additional check of iint_cache in integrity_inode_get() is no longer
necessary. If the 'integrity' LSM is not selected in the kernel
configuration, integrity_inode_get() just returns NULL.
This reverts commit 92063f3ca73aab794bd5408d3361fd5b5ea33079.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Introduce LSM_ORDER_LAST, to satisfy the requirement of LSMs needing to be
last, e.g. the 'integrity' LSM, without changing the kernel command line or
configuration.
Also, set this order for the 'integrity' LSM. While not enforced, this is
the only LSM expected to use it.
Similarly to LSM_ORDER_FIRST, LSMs with LSM_ORDER_LAST are always enabled
and put at the end of the LSM list, if selected in the kernel
configuration. Setting one of these orders alone, does not cause the LSMs
to be selected and compiled built-in in the kernel.
Finally, for LSM_ORDER_MUTABLE LSMs, set the found variable to true if an
LSM is found, regardless of its order. In this way, the kernel would not
wrongly report that the LSM is not built-in in the kernel if its order is
LSM_ORDER_LAST.
Fixes: 79f7865d844c ("LSM: Introduce "lsm=" for boottime LSM selection")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Fix the stale cgroup.c path in the devcgroup_css_alloc() description.
Signed-off-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
There is no good reason for why the "_buffer" parameter needs an
underscore, get rid of it.
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Remove unnecessary type casting.
The type of inode variable is struct inode *, so no type casting required.
Signed-off-by: XU pengfei <xupengfei@nfschina.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
|
|
This is based on earlier patch posted to the list by Linus, his
commit description read:
"avc_has_perm_noaudit()is one of those hot functions that end up
being used by almost all filesystem operations (through
"avc_has_perm()") and it's intended to be cheap enough to inline.
However, it turns out that the unlikely parts of it (where it
doesn't find an existing avc node) need a fair amount of stack
space for the automatic replacement node, so if it were to be
inlined (at least clang does not) it would just use stack space
unnecessarily.
So split the unlikely part out of it, and mark that part noinline.
That improves the actual likely part."
The basic idea behind the patch was reasonable, but there were minor
nits (double indenting, etc.) and the RCU read lock unlock/re-lock in
avc_compute_av() began to look even more ugly. This patch builds on
Linus' first effort by cleaning things up a bit and removing the RCU
unlock/lock dance in avc_compute_av().
Removing the RCU lock dance in avc_compute_av() is safe as there are
currently two callers of avc_compute_av(): avc_has_perm_noaudit() and
avc_has_extended_perms(). The first caller in avc_has_perm_noaudit()
does not require a RCU lock as there is no avc_node to protect so the
RCU lock can be dropped before calling avc_compute_av(). The second
caller, avc_has_extended_perms(), is similar in that there is no
avc_node that requires RCU protection, but the code is simplified by
holding the RCU look around the avc_compute_av() call, and given that
we enter a RCU critical section in security_compute_av() (called from
av_compute_av()) the impact will likely be unnoticeable. It is also
worth noting that avc_has_extended_perms() is only called from the
SELinux ioctl() access control hook at the moment.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
As we were already making massive changes to security/security.c by
moving all of the function header comments above the function
definitions, let's take the opportunity to fix various style crimes.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This patch relocates the LSM hook function comments to the function
definitions, in keeping with the current kernel conventions. This
should make the hook descriptions more easily discoverable and easier
to maintain.
While formatting changes have been done to better fit the kernel-doc
style, content changes have been kept to a minimum and limited to
text which was obviously incorrect and/or outdated. It is expected
the future patches will improve the quality of the function header
comments.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Back in 2008 we extended the capability bits from 32 to 64, and we did
it by extending the single 32-bit capability word from one word to an
array of two words. It was then obfuscated by hiding the "2" behind two
macro expansions, with the reasoning being that maybe it gets extended
further some day.
That reasoning may have been valid at the time, but the last thing we
want to do is to extend the capability set any more. And the array of
values not only causes source code oddities (with loops to deal with
it), but also results in worse code generation. It's a lose-lose
situation.
So just change the 'u32[2]' into a 'u64' and be done with it.
We still have to deal with the fact that the user space interface is
designed around an array of these 32-bit values, but that was the case
before too, since the array layouts were different (ie user space
doesn't use an array of 32-bit values for individual capability masks,
but an array of 32-bit slices of multiple masks).
So that marshalling of data is actually simplified too, even if it does
remain somewhat obscure and odd.
This was all triggered by my reaction to the new "cap_isidentical()"
introduced recently. By just using a saner data structure, it went from
unsigned __capi;
CAP_FOR_EACH_U32(__capi) {
if (a.cap[__capi] != b.cap[__capi])
return false;
}
return true;
to just being
return a.val == b.val;
instead. Which is rather more obvious both to humans and to compilers.
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Paul Moore <paul@paul-moore.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It seems tomoyo has had its own implementation of what
kmalloc_size_roundup() does today. Remove the function tomoyo_round2()
and replace it with kmalloc_size_roundup(). It provides more accurate
results and doesn't contain a while loop.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Support for configuring secure boot with user-defined keys on PowerVM
LPARs
- Simplify the replay of soft-masked IRQs by making it non-recursive
- Add support for KCSAN on 64-bit Book3S
- Improvements to the API & code which interacts with RTAS (pseries
firmware)
- Change 32-bit powermac to assign PCI bus numbers per domain by
default
- Some improvements to the 32-bit BPF JIT
- Various other small features and fixes
Thanks to Anders Roxell, Andrew Donnellan, Andrew Jeffery, Benjamin
Gray, Christophe Leroy, Frederic Barrat, Ganesh Goudar, Geoff Levand,
Greg Kroah-Hartman, Jan-Benedict Glaw, Josh Poimboeuf, Kajol Jain,
Laurent Dufour, Mahesh Salgaonkar, Mathieu Desnoyers, Mimi Zohar, Murphy
Zhou, Nathan Chancellor, Nathan Lynch, Nayna Jain, Nicholas Piggin, Pali
Rohár, Petr Mladek, Rohan McLure, Russell Currey, Sachin Sant, Sathvika
Vasireddy, Sourabh Jain, Stefan Berger, Stephen Rothwell, and Sudhakar
Kuppusamy.
* tag 'powerpc-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (114 commits)
powerpc/pseries: Avoid hcall in plpks_is_available() on non-pseries
powerpc: dts: turris1x.dts: Set lower priority for CPLD syscon-reboot
powerpc/e500: Add missing prototype for 'relocate_init'
powerpc/64: Fix unannotated intra-function call warning
powerpc/epapr: Don't use wrteei on non booke
powerpc: Pass correct CPU reference to assembler
powerpc/mm: Rearrange if-else block to avoid clang warning
powerpc/nohash: Fix build with llvm-as
powerpc/nohash: Fix build error with binutils >= 2.38
powerpc/pseries: Fix endianness issue when parsing PLPKS secvar flags
macintosh: windfarm: Use unsigned type for 1-bit bitfields
powerpc/kexec_file: print error string on usable memory property update failure
powerpc/machdep: warn when machine_is() used too early
powerpc/64: Replace -mcpu=e500mc64 by -mcpu=e5500
powerpc/eeh: Set channel state after notifying the drivers
selftests/powerpc: Fix incorrect kernel headers search path
powerpc/rtas: arch-wide function token lookup conversions
powerpc/rtas: introduce rtas_function_token() API
powerpc/pseries/lpar: convert to papr_sysparm API
powerpc/pseries/hv-24x7: convert to papr_sysparm API
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
|
|
Pull smack update from Casey Schaufler:
"One fix for resetting CIPSO labeling"
* tag 'Smack-for-6.3' of https://github.com/cschaufler/smack-next:
smackfs: Added check catlen
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity update from Mimi Zohar:
"One doc and one code cleanup, and two bug fixes"
* tag 'integrity-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Introduce MMAP_CHECK_REQPROT hook
ima: Align ima_file_mmap() parameters with mmap_file LSM hook
evm: call dump_security_xattr() in all cases to remove code duplication
ima: fix ima_delete_rules() kernel-doc warning
ima: return IMA digest value only when IMA_COLLECTED flag is set
ima: fix error handling logic when file measurement failed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Use kmap_local instead of kmap_atomic
- Change request callback to take void pointer
- Print FIPS status in /proc/crypto (when enabled)
Algorithms:
- Add rfc4106/gcm support on arm64
- Add ARIA AVX2/512 support on x86
Drivers:
- Add TRNG driver for StarFive SoC
- Delete ux500/hash driver (subsumed by stm32/hash)
- Add zlib support in qat
- Add RSA support in aspeed"
* tag 'v6.3-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (156 commits)
crypto: x86/aria-avx - Do not use avx2 instructions
crypto: aspeed - Fix modular aspeed-acry
crypto: hisilicon/qm - fix coding style issues
crypto: hisilicon/qm - update comments to match function
crypto: hisilicon/qm - change function names
crypto: hisilicon/qm - use min() instead of min_t()
crypto: hisilicon/qm - remove some unused defines
crypto: proc - Print fips status
crypto: crypto4xx - Call dma_unmap_page when done
crypto: octeontx2 - Fix objects shared between several modules
crypto: nx - Fix sparse warnings
crypto: ecc - Silence sparse warning
tls: Pass rec instead of aead_req into tls_encrypt_done
crypto: api - Remove completion function scaffolding
tls: Remove completion function scaffolding
tipc: Remove completion function scaffolding
net: ipv6: Remove completion function scaffolding
net: ipv4: Remove completion function scaffolding
net: macsec: Remove completion function scaffolding
dm: Remove completion function scaffolding
...
|
|
If the catlen is 0, the memory for the netlbl_lsm_catmap
structure must be allocated anyway, otherwise the check of
such rules is not completed correctly.
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"Beyond some specific LoadPin, UBSAN, and fortify features, there are
other fixes scattered around in various subsystems where maintainers
were okay with me carrying them in my tree or were non-responsive but
the patches were reviewed by others:
- Replace 0-length and 1-element arrays with flexible arrays in
various subsystems (Paulo Miguel Almeida, Stephen Rothwell, Kees
Cook)
- randstruct: Disable Clang 15 support (Eric Biggers)
- GCC plugins: Drop -std=gnu++11 flag (Sam James)
- strpbrk(): Refactor to use strchr() (Andy Shevchenko)
- LoadPin LSM: Allow root filesystem switching when non-enforcing
- fortify: Use dynamic object size hints when available
- ext4: Fix CFI function prototype mismatch
- Nouveau: Fix DP buffer size arguments
- hisilicon: Wipe entire crypto DMA pool on error
- coda: Fully allocate sig_inputArgs
- UBSAN: Improve arm64 trap code reporting
- copy_struct_from_user(): Add minimum bounds check on kernel buffer
size"
* tag 'hardening-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
randstruct: disable Clang 15 support
uaccess: Add minimum bounds check on kernel buffer size
arm64: Support Clang UBSAN trap codes for better reporting
coda: Avoid partial allocation of sig_inputArgs
gcc-plugins: drop -std=gnu++11 to fix GCC 13 build
lib/string: Use strchr() in strpbrk()
crypto: hisilicon: Wipe entire pool on error
net/i40e: Replace 0-length array with flexible array
io_uring: Replace 0-length array with flexible array
ext4: Fix function prototype mismatch for ext4_feat_ktype
i915/gvt: Replace one-element array with flexible-array member
drm/nouveau/disp: Fix nvif_outp_acquire_dp() argument size
LoadPin: Allow filesystem switch when not enforcing
LoadPin: Move pin reporting cleanly out of locking
LoadPin: Refactor sysctl initialization
LoadPin: Refactor read-only check into a helper
ARM: ixp4xx: Replace 0-length arrays with flexible arrays
fortify: Use __builtin_dynamic_object_size() when available
rxrpc: replace zero-lenth array with DECLARE_FLEX_ARRAY() helper
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfs idmapping updates from Christian Brauner:
- Last cycle we introduced the dedicated struct mnt_idmap type for
mount idmapping and the required infrastucture in 256c8aed2b42 ("fs:
introduce dedicated idmap type for mounts"). As promised in last
cycle's pull request message this converts everything to rely on
struct mnt_idmap.
Currently we still pass around the plain namespace that was attached
to a mount. This is in general pretty convenient but it makes it easy
to conflate namespaces that are relevant on the filesystem with
namespaces that are relevant on the mount level. Especially for
non-vfs developers without detailed knowledge in this area this was a
potential source for bugs.
This finishes the conversion. Instead of passing the plain namespace
around this updates all places that currently take a pointer to a
mnt_userns with a pointer to struct mnt_idmap.
Now that the conversion is done all helpers down to the really
low-level helpers only accept a struct mnt_idmap argument instead of
two namespace arguments.
Conflating mount and other idmappings will now cause the compiler to
complain loudly thus eliminating the possibility of any bugs. This
makes it impossible for filesystem developers to mix up mount and
filesystem idmappings as they are two distinct types and require
distinct helpers that cannot be used interchangeably.
Everything associated with struct mnt_idmap is moved into a single
separate file. With that change no code can poke around in struct
mnt_idmap. It can only be interacted with through dedicated helpers.
That means all filesystems are and all of the vfs is completely
oblivious to the actual implementation of idmappings.
We are now also able to extend struct mnt_idmap as we see fit. For
example, we can decouple it completely from namespaces for users that
don't require or don't want to use them at all. We can also extend
the concept of idmappings so we can cover filesystem specific
requirements.
In combination with the vfs{g,u}id_t work we finished in v6.2 this
makes this feature substantially more robust and thus difficult to
implement wrong by a given filesystem and also protects the vfs.
- Enable idmapped mounts for tmpfs and fulfill a longstanding request.
A long-standing request from users had been to make it possible to
create idmapped mounts for tmpfs. For example, to share the host's
tmpfs mount between multiple sandboxes. This is a prerequisite for
some advanced Kubernetes cases. Systemd also has a range of use-cases
to increase service isolation. And there are more users of this.
However, with all of the other work going on this was way down on the
priority list but luckily someone other than ourselves picked this
up.
As usual the patch is tiny as all the infrastructure work had been
done multiple kernel releases ago. In addition to all the tests that
we already have I requested that Rodrigo add a dedicated tmpfs
testsuite for idmapped mounts to xfstests. It is to be included into
xfstests during the v6.3 development cycle. This should add a slew of
additional tests.
* tag 'fs.idmapped.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: (26 commits)
shmem: support idmapped mounts for tmpfs
fs: move mnt_idmap
fs: port vfs{g,u}id helpers to mnt_idmap
fs: port fs{g,u}id helpers to mnt_idmap
fs: port i_{g,u}id_into_vfs{g,u}id() to mnt_idmap
fs: port i_{g,u}id_{needs_}update() to mnt_idmap
quota: port to mnt_idmap
fs: port privilege checking helpers to mnt_idmap
fs: port inode_owner_or_capable() to mnt_idmap
fs: port inode_init_owner() to mnt_idmap
fs: port acl to mnt_idmap
fs: port xattr to mnt_idmap
fs: port ->permission() to pass mnt_idmap
fs: port ->fileattr_set() to pass mnt_idmap
fs: port ->set_acl() to pass mnt_idmap
fs: port ->get_acl() to pass mnt_idmap
fs: port ->tmpfile() to pass mnt_idmap
fs: port ->rename() to pass mnt_idmap
fs: port ->mknod() to pass mnt_idmap
fs: port ->mkdir() to pass mnt_idmap
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"In additon to bug fixes, these are noteworthy changes:
- In TPM I2C drivers, migrate from probe() to probe_new() (a new
driver model in I2C).
- TPM CRB: Pluton support
- Add duplicate hash detection to the blacklist keyring in order to
give more meaningful klog output than e.g. [1]"
Link: https://askubuntu.com/questions/1436856/ubuntu-22-10-blacklist-problem-blacklisting-hash-13-message-on-boot [1]
* tag 'tpm-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: add vendor flag to command code validation
tpm: Add reserved memory event log
tpm: Use managed allocation for bios event log
tpm: tis_i2c: Convert to i2c's .probe_new()
tpm: tpm_i2c_nuvoton: Convert to i2c's .probe_new()
tpm: tpm_i2c_infineon: Convert to i2c's .probe_new()
tpm: tpm_i2c_atmel: Convert to i2c's .probe_new()
tpm: st33zp24: Convert to i2c's .probe_new()
KEYS: asymmetric: Fix ECDSA use via keyctl uapi
certs: don't try to update blacklist keys
KEYS: Add new function key_create()
certs: make blacklisted hash available in klog
tpm_crb: Add support for CRB devices based on Pluton
crypto: certs: fix FIPS selftest dependency
|
|
This fixes a regression in mediation of getattr when old policy built
under an older ABI is loaded and mapped to internal permissions.
The regression does not occur for all getattr permission requests,
only appearing if state zero is the final state in the permission
lookup. This is because despite the first state (index 0) being
guaranteed to not have permissions in both newer and older permission
formats, it may have to carry permissions that were not mediated as
part of an older policy. These backward compat permissions are
mapped here to avoid special casing the mediation code paths.
Since the mapping code already takes into account backwards compat
permission from older formats it can be applied to state 0 to fix
the regression.
Fixes: 408d53e923bd ("apparmor: compute file permissions on profile load")
Reported-by: Philip Meulengracht <the_meulengracht@hotmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
Add support for loading keys from the PLPKS on pseries machines, with the
"ibm,plpks-sb-v1" format.
The object format is expected to be the same, so there shouldn't be any
functional differences between objects retrieved on powernv or pseries.
Unlike on powernv, on pseries the format string isn't contained in the
device tree. Use secvar_ops->format() to fetch the format string in a
generic manner, rather than searching the device tree ourselves.
(The current code searches the device tree for a node compatible with
"ibm,edk2-compat-v1". This patch switches to calling secvar_ops->format(),
which in the case of OPAL/powernv means opal_secvar_format(), which
searches the device tree for a node compatible with "ibm,secvar-backend"
and checks its "format" property. These are equivalent, as skiboot creates
a node with both "ibm,edk2-compat-v1" and "ibm,secvar-backend" as
compatible strings.)
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-27-ajd@linux.ibm.com
|
|
A few improvements to load_powerpc.c:
- include integrity.h for the pr_fmt()
- move all error reporting out of get_cert_list()
- use ERR_PTR() to better preserve error detail
- don't use pr_err() for missing keys
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-26-ajd@linux.ibm.com
|
|
This patch replaces the custom crypto completion function with
crypto_req_done.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
key_create() works like key_create_or_update() but does not allow
updating an existing key, instead returning ERR_PTR(-EEXIST).
key_create() will be used by the blacklist keyring which should not
create duplicate entries or update existing entries.
Instead a dedicated message with appropriate severity will be logged.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
There's no reason for secvar_operations to use uint64_t vs the more
common kernel type u64.
The types are compatible, but they require different printk format
strings which can lead to confusion.
Change all the secvar related routines to use u64.
Reviewed-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230210080401.345462-5-ajd@linux.ibm.com
|
|
Replace direct modifications to vma->vm_flags with calls to modifier
functions to be able to track flag changes and to keep vma locking
correctness.
[akpm@linux-foundation.org: fix drivers/misc/open-dice.c, per Hyeonggon Yoo]
Link: https://lkml.kernel.org/r/20230126193752.297968-5-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@google.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Oskolkov <posk@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The randstruct support released in Clang 15 is unsafe to use due to a
bug that can cause miscompilations: "-frandomize-layout-seed
inconsistently randomizes all-function-pointers structs"
(https://github.com/llvm/llvm-project/issues/60349). It has been fixed
on the Clang 16 release branch, so add a Clang version check.
Fixes: 035f7f87b729 ("randstruct: Enable Clang support")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Bill Wendling <morbo@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230208065133.220589-1-ebiggers@kernel.org
|
