Age | Commit message (Collapse) | Author |
|
The minimum value for the PGA Volume is given as 0x1A, however the
values from there to 0x19 are all the same volume and this is not
represented in the TLV structure. The number of volumes given is correct
so this leads to all the volumes being shifted. Move the minimum value
up to 0x19 to fix this.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220602162119.3393857-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A couple of the SX volume controls specify 0x84 as the lowest volume
value, however the correct value from the datasheet is 0x44. The
datasheet don't include spaces in the value it displays as binary so
this was almost certainly just a typo reading 1000100.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220602162119.3393857-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Bypass Volume is accidentally using a -6dB minimum TLV rather than
the correct -60dB minimum. Add a new TLV to correct this.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220602162119.3393857-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This driver specified the maximum value rather than the number of volume
levels on the SX controls, this is incorrect, so correct them.
Reported-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220602162119.3393857-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The digital volume TLV specifies the step as 0.25dB but the actual step
of the control is 0.125dB. Update the TLV to correct this.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220602162119.3393857-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The datasheet specifies the range of the mixer volumes as between
-51.5dB and 12dB with a 0.5dB step. Update the TLVs for this.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220602162119.3393857-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We tried to enable the audio on an imx6sx EVB with the codec nau8822,
after setting the internal PLL fractional parameters, the audio still
couldn't work and the there was no sdma irq at all.
After checking with the section "8.1.1 Phase Locked Loop (PLL) Design
Example" of "NAU88C22 Datasheet Rev 0.6", we found we need to
turn off the PLL before programming fractional parameters and turn on
the PLL after programming.
After this change, the audio driver could record and play sound and
the sdma's irq is triggered when playing or recording.
Cc: David Lin <ctlin0@nuvoton.com>
Cc: John Hsu <kchsu0@nuvoton.com>
Cc: Seven Li <wtli@nuvoton.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20220530040151.95221-2-hui.wang@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently wm_adsp_fw_put() returns 0 rather than 1 when updating the value
of the control, meaning that no event is generated to userspace. Fix this
by setting the default return value to 1, the code already exits early with
a return value of 0 if the value is unchanged.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220603115003.3865834-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As part of moving to remove the old style defines for the bus clocks update
the max9860 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20220602125812.3551947-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As i2c_add_driver could return error if fails, it should be
better to check the return value.
However, if the CONFIG_I2C and CONFIG_SPI_MASTER are both true,
the return value of i2c_add_driver will be covered by
spi_register_driver.
Therefore, it is necessary to add check and return error if fails.
Fixes: aa0e25caafb7 ("ASoC: da7210: Add support for spi regmap")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220531094712.2376759-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As part of moving to remove the old style defines for the bus clocks update
the tfa9879 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20220602131058.3552621-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
cs35l45_remove() always returns zero. Make it return no value which
makes it easier to see in the callers that there is no error to handle.
Also the return value of i2c driver remove callbacks is ignored anyway.
This prepares making i2c remove callbacks return void, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220520173349.774366-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When we configure the PLL record the input and output frequency, then if we
get asked to configure the same values again just skip reprogramming the
hardware. This makes things a bit easier to use for machine drivers since
it means they don't need to keep track of if they've programmed the PLL
so much.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220603103530.3844527-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The initialization sequence is taken from the version provided
by the supplier [1].
This allows speakers using the TFA9890 amplifier to work, which are
used by various mobile phones such as the SHIFT6mq.
[1]: https://source.codeaurora.org/external/mas/tfa98xx/tree/src/tfa_init.c?id=d2cd12931fbc48df988b62931fb9960d4e9dc05d#n1827
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20220602164504.261361-1-amartinz@shiftphones.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Change the header file to fix build errors in max98390.c:
../sound/soc/codecs/max98390.c: In function 'max98390_i2c_probe':
../sound/soc/codecs/max98390.c:1076:22: error: implicit declaration of function 'devm_gpiod_get_optional'; did you mean 'devm_regulator_get_optional'? [-Werror=implicit-function-declaration]
1076 | reset_gpio = devm_gpiod_get_optional(&i2c->dev,
../sound/soc/codecs/max98390.c:1077:55: error: 'GPIOD_OUT_HIGH' undeclared (first use in this function); did you mean 'GPIOF_INIT_HIGH'?
1077 | "reset", GPIOD_OUT_HIGH);
../sound/soc/codecs/max98390.c:1077:55: note: each undeclared identifier is reported only once for each function it appears in
../sound/soc/codecs/max98390.c:1083:17: error: implicit declaration of function 'gpiod_set_value_cansleep'; did you mean 'gpio_set_value_cansleep'? [-Werror=implicit-function-declaration]
1083 | gpiod_set_value_cansleep(reset_gpio, 0);
Fixes: 397ff0249606 ("ASoC: max98390: Add reset gpio control")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Steve Lee <steve.lee.analog@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Link: https://lore.kernel.org/r/20220605163123.23537-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
boilerplate/reference with SPDX" rules
The "Replace GPLv2 boilerplate/reference with SPDX" has left some empty
"License terms" paragraphs.
Remove them as well.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/28c0833d4a11f8f75f385e5aad93c23721b06c7e.1653724847.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: b6bc07d4360d ("ASoC: cros_ec_codec: support WoV")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220603131043.38907-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
cppcheck warning:
sound/soc/codecs/wcd9335.c:1810:23: style: Condition 'tx_port>=4' is
always true [knownConditionTrueFalse]
} else if ((tx_port >= 4) && (tx_port < 8)) {
^
sound/soc/codecs/wcd9335.c:1806:15: note: Assuming that condition
'tx_port<4' is not redundant
if (tx_port < 4) {
^
sound/soc/codecs/wcd9335.c:1810:23: note: Condition 'tx_port>=4' is
always true
} else if ((tx_port >= 4) && (tx_port < 8)) {
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220520211719.607543-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
cppcheck warning:
sound/soc/codecs/wcd-mbhc-v2.c:1309:17: style: Variable 'clamp_state'
is assigned a value that is never used. [unreadVariable]
u8 clamp_state = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220520211719.607543-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
cppcheck warning:
sound/soc/codecs/cs42l42.c:1704:28: style: The statement 'if
(cs42l42->plug_state!=CS42L42_TS_TRANS)
cs42l42->plug_state=CS42L42_TS_TRANS' is logically equivalent to
'cs42l42->plug_state=CS42L42_TS_TRANS'. [duplicateConditionalAssign]
if (cs42l42->plug_state != CS42L42_TS_TRANS)
^
sound/soc/codecs/cs42l42.c:1705:25: note: Assignment
'cs42l42->plug_state=CS42L42_TS_TRANS'
cs42l42->plug_state = CS42L42_TS_TRANS;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220520211719.607543-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
cppcheck warning:
sound/soc/codecs/cs35l45-tables.c:36:49: style:inconclusive: Function
'cs35l45_apply_patch' argument 1 names different: declaration
'cs43l45' definition 'cs35l45'. [funcArgNamesDifferent]
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220520211719.607543-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As part of moving to remove the old style defines for the bus clocks update
the ssm4567 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220602130531.3552275-4-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As part of moving to remove the old style defines for the bus clocks update
the ssm2602 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220602130531.3552275-3-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
As part of moving to remove the old style defines for the bus clocks update
the ssm2518 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220602130531.3552275-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When waking from hibernation, it is possible for the function
which sends the wake command to fail initially, but after a
retry it will succeed. There is no need to print an error if
the initial attempts fail.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220525131638.5512-11-vitalyr@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Since the CS35L41 HDA driver also support hibernation, it
makes sense to move code from the ASoC driver to enter
hibernation into common code.
Since HDA must support laptops which do not support hibernation
due to lack of external boost GPIO it is necessary to
ensure the function returns an error when an unsupported
boost type is in use.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220525131638.5512-12-vitalyr@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
CS35L41 HDA Driver will support hibernation using DSP firmware,
move the exit hibernate function into shared code so this can
be reused.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220525131638.5512-10-vitalyr@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A remove callback that just returns 0 is equivalent to no callback at all
as can be seen in i2c_device_remove(). So simplify accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220603140513.131142-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A remove callback that just returns 0 is equivalent to no callback at all
as can be seen in i2c_device_remove(). So simplify accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220603140513.131142-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A remove callback that just returns 0 is equivalent to no callback at all
as can be seen in i2c_device_remove(). So simplify accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220603140513.131142-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A remove callback that just returns 0 is equivalent to no callback at all
as can be seen in i2c_device_remove(). So simplify accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220603140513.131142-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add generic ASoC equivalent of ALSA HD-Audio codec. This codec is
designed to follow HDA_DEV_LEGACY convention. Driver wrapps existing
hda_codec.c handlers to prevent code duplication within the newly added
code. Number of DAIs created is dependent on capabilities exposed by the
codec itself. Because of this, single solution can be applied to support
every single HD-Audio codec type.
At the same time, through the ASoC topology, platform drivers may limit
the number of endpoints available to the userspace as codec driver
exposes BE DAIs only.
Both hda_codec_probe() and hda_codec_remove() declare their expectations
on device's usage_count and suspended-status. This is to catch any
unexpected behavior as PM-related code for HD-Audio has been changing
quite a bit throughout the years.
In order for codec DAI list to reflect its actual PCM capabilities, PCMs
need to be built and that can only happen once codec device is
constructed. To do that, a valid component->card->snd_card pointer is
needed. Said pointer will be provided by the framework once all card
components are accounted for and their probing can begin. Usage of
"binder" BE DAI solves the problem - codec can be listed as one of
HD-Audio card components without declaring any actual BE DAIs
statically.
Relation with hdac_hda:
Addition of parallel solution is motivated by behavioral differences
between hdac_hda.c and its legacy equivalent found in sound/pci/hda
e.g.: lack of dynamic, based on codec capabilities, resource allocation
and high cost of removing such differences on actively used targets.
Major goal of codec driver presented here is to follow HD-Audio legacy
behavior in 1:1 fashion by becoming a wrapper. Doing so increases code
coverage of the legacy code and reduces the maintenance cost for both
solutions.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220511162403.3987658-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
After finishing the playback or recording, the machine driver might
call snd_soc_dai_set_pll(codec, pll_id, 0, 0, 0) to stop the internal
PLL, but with the codec driver nau8822, it will print error as below:
nau8822 0-001a: Unsupported input clock 0
fsl-asoc-card sound-nau8822: failed to stop FLL: -22
Refer to the function wm8962_set_fll() in the codec driver wm8962, if
the freq_out is zero, turn off the internal PLL and return 0.
Cc: David Lin <ctlin0@nuvoton.com>
Cc: John Hsu <kchsu0@nuvoton.com>
Cc: Seven Li <wtli@nuvoton.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20220530040151.95221-3-hui.wang@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
Currently wm_adsp_fw_put() returns 0 rather than 1 when updating the value
of the control, meaning that no event is generated to userspace. Fix this
by setting the default return value to 1, the code already exits early with
a return value of 0 if the value is unchanged.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220603115003.3865834-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently the put() method for the deemphasis control returns 0 when a new
value is written to the control even if the value changed, meaning events
are not generated. Fix this, skip the work of updating the value when it is
unchanged and then return 1 after having done so.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220603123937.4013603-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If the audio CODEC is playing sound when the system is suspended,
it can be left in a state which throws the following error:
wm8962 3-001a: ASoC: error at soc_component_read_no_lock on wm8962.3-001a: -16
Once this error has occurred, the audio will not work again until rebooted.
Fix this by configuring SET_SYSTEM_SLEEP_PM_OPS.
Signed-off-by: Adam Ford <aford173@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220526182129.538472-1-aford173@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The minimum value for the PGA Volume is given as 0x1A, however the
values from there to 0x19 are all the same volume and this is not
represented in the TLV structure. The number of volumes given is correct
so this leads to all the volumes being shifted. Move the minimum value
up to 0x19 to fix this.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220602162119.3393857-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A couple of the SX volume controls specify 0x84 as the lowest volume
value, however the correct value from the datasheet is 0x44. The
datasheet don't include spaces in the value it displays as binary so
this was almost certainly just a typo reading 1000100.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220602162119.3393857-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Bypass Volume is accidentally using a -6dB minimum TLV rather than
the correct -60dB minimum. Add a new TLV to correct this.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220602162119.3393857-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This driver specified the maximum value rather than the number of volume
levels on the SX controls, this is incorrect, so correct them.
Reported-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220602162119.3393857-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The digital volume TLV specifies the step as 0.25dB but the actual step
of the control is 0.125dB. Update the TLV to correct this.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220602162119.3393857-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The datasheet specifies the range of the mixer volumes as between
-51.5dB and 12dB with a 0.5dB step. Update the TLVs for this.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220602162119.3393857-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We tried to enable the audio on an imx6sx EVB with the codec nau8822,
after setting the internal PLL fractional parameters, the audio still
couldn't work and the there was no sdma irq at all.
After checking with the section "8.1.1 Phase Locked Loop (PLL) Design
Example" of "NAU88C22 Datasheet Rev 0.6", we found we need to
turn off the PLL before programming fractional parameters and turn on
the PLL after programming.
After this change, the audio driver could record and play sound and
the sdma's irq is triggered when playing or recording.
Cc: David Lin <ctlin0@nuvoton.com>
Cc: John Hsu <kchsu0@nuvoton.com>
Cc: Seven Li <wtli@nuvoton.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20220530040151.95221-2-hui.wang@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.19
A few more fixes that came in during the merge window - nothing
huge here, there is one core fix for DPCM from Pierre but mostly
driver changes.
|
|
To avoid the unlikely possibility of register misalignment for
headphones being ungrounded/driven after a jack has been removed,
move the cancel_work_sync() call to the start of the jack removal
handling in the IRQ thread.
Signed-off-by: Adam Thomson <DLG-Adam.Thomson.Opensource@dm.renesas.com>
Link: https://lore.kernel.org/r/b3f9a679f1e27a9359dcecb496953c4af30acbaa.1653916368.git.DLG-Adam.Thomson.Opensource@dm.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It has been recently found that certain 'active' headsets can
be mis-detected as OMTP instead of CTIA, causing obvious issus
with audio quality. This relates to increased resistances which
negatively impacts the pole detection circuitry within the device.
To counter this, ground switches on both headphone channels are
available to enable/disable and these allow for the detection
process to operate as intended, even with active headsets. This
commit adds control of the ground switches to the AAD logic.
Signed-off-by: Adam Thomson <DLG-Adam.Thomson.Opensource@dm.renesas.com>
Link: https://lore.kernel.org/r/e0a627725c189dd50d6ce24571aed87fe2597395.1653916368.git.DLG-Adam.Thomson.Opensource@dm.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
is not in the DAPM
The pin "Platform Clock" was only used by the Intel Byt CR platform. In the
others, the error log will be informed. The patch will set the flag to
avoid the pin "Platform Clock" manipulated by the other platforms.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Reported-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20220516103055.20003-1-oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.19
This is quite a big update, partly due to the addition of some larger
drivers (more of which is to follow since at least the AVS driver is
still a work in progress) and partly due to Charles' work sorting out
our handling of endianness. As has been the case recently it's much
more about drivers than the core.
- Overhaul of endianness specification for data formats, avoiding
needless restrictions due to CODECs.
- Initial stages of Intel AVS driver merge.
- Introduction of v4 IPC mechanism for SOF.
- TDM mode support for AK4613.
- Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim
MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces,
nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780
|
|
Merge for 5.18-rc1
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|