| Age | Commit message (Collapse) | Author |
|---|
|
On probe of the ASoC component, the device is reset but the regcache is
retained. This means the regcache gets out of sync if the codec is
rebound to a sound card for a second time. Fix it by reinitializing the
regcache to defaults after the device is reset.
Fixes: b0bcbe615756 ("ASoC: tas2770: Fix calling reset in probe")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220919173453.84292-1-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On resuming, we anticipate that the jack is detected before playback
or capture. Therefore, we use semaphore to control the jack detection
done without any bothering. During booting, the driver launches jack
detection and releases the semaphore. However, it doesn't perceive the
maniputation of semaphore is not like resuming procedure. This makes
the semaphore's count value become to 2. There is more than one thread
can enter into the critical section. This may get unexpected situation
and make some chaos.
Signed-off-by: SJLIN0 <SJLIN0@nuvoton.com>
Signed-off-by: Wallace Lin <savagecin@gmail.com>
Link: https://lore.kernel.org/r/20220915012800.825196-1-SJLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The patch fixes the issue of the abnormal JD2 status.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Reported-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20220912072931.1856-1-oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
nau8540 driver restricts the sample rate with over sampling rate, but
currently it barely bails out at hw_params with -EINVAL error (with a
kernel message); this doesn't help for user-space to recognize which
rate can be actually used.
This patch introduces the proper hw constraint for adjusting the
available range of the sample rate depending on the OSR setup, as well
as some code cleanup, for improving the communication with
user-space. Now applications can know the valid rate beforehand and
reduces the rate appropriately without errors.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220823081000.2965-6-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
nau8825 driver restricts the sample rate with over sampling rate, but
currently it barely bails out at hw_params with -EINVAL error (with a
kernel message); this doesn't help for user-space to recognize which
rate can be actually used.
This patch introduces the proper hw constraint for adjusting the
available range of the sample rate depending on the OSR setup, as well
as some code cleanup, for improving the communication with
user-space. Now applications can know the valid rate beforehand and
reduces the rate appropriately without errors.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220823081000.2965-5-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
nau8824 driver restricts the sample rate with over sampling rate, but
currently it barely bails out at hw_params with -EINVAL error (with a
kernel message); this doesn't help for user-space to recognize which
rate can be actually used.
This patch introduces the proper hw constraint for adjusting the
available range of the sample rate depending on the OSR setup, as well
as some code cleanup, for improving the communication with
user-space. Now applications can know the valid rate beforehand and
reduces the rate appropriately without errors.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220823081000.2965-4-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The semaphore of nau8824 wasn't properly unlocked at some error
handling code paths, hence this may result in the unbalance (and
potential lock-up). Fix them to handle the semaphore up properly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220823081000.2965-3-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
nau8821 driver restricts the sample rate with over sampling rate, but
currently it barely bails out at hw_params with -EINVAL error (with a
kernel message); this doesn't help for user-space to recognize which
rate can be actually used.
This patch introduces the proper hw constraint for adjusting the
available range of the sample rate depending on the OSR setup, as well
as some code cleanup, for improving the communication with
user-space. Now applications can know the valid rate beforehand and
reduces the rate appropriately without errors.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220823081000.2965-2-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Only report a button state change if the interrupt status shows that
there was a button event.
Previously the code would always drop into the button reporting at the
end of interrupt handling if the jack was present. If neither of the
button report interrupts were pending it would report all buttons
released. This could then lead to a button being reported as released
while it is still pressed.
Fixes: c5b8ee0879bc ("ASoC: cs42l42: Report jack and button detection")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220815123138.3810249-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
The two commits referenced below break mono playback via I2S DAI because
they set BCLK to half the required speed. For PCM transport over I2S, the
number of transmitted channels is always 2, even for mono playback.
Fixes: dcd79364bff3 ("ASoC: codec: tlv3204: Enable 24 bit audio support")
Fixes: 40b37136287b ("ASoC: tlv320aic32x4: Fix bdiv clock rate derivation")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220810104156.665452-1-p.zabel@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Martin Povišer <povik+lin@cutebit.org>:
The first two fixes should be straightforward.
The latter two clean up what looks to me like a mess in the setting of
power levels. However we settle it, we should then do the same changes
to TAS2764, which has the same template (and maybe there are other
drivers).
|
|
The patch fixes the JD voltage dropping issue in the HDA JD using.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Reported-by: Mohan Kumar D <mkumard@nvidia.com>
Link: https://lore.kernel.org/r/20220808052836.25791-1-oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Because the PWR_CTRL field is modeled as the power state of the DAC
widget, and at the same time it is used to implement mute/unmute, we
need some additional book-keeping to have the right end result no matter
the sequence of calls. Without this fix, one can mute an ongoing stream
by toggling a speaker pin control.
Fixes: 1a476abc723e ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220808141246.5749-5-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The driver is setting the PWR_CTRL field in both the set_bias_level
callback and on DAPM events of the DAC widget (and also in the
mute_stream method). Drop the set_bias_level callback altogether as the
power setting it does is in conflict with the other code paths.
Fixes: 1a476abc723e ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220808141246.5749-4-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The part is a mono speaker amp, but it can do downmix and switch between
left and right channel, so the right channel range is 1 to 2.
Fixes: 1a476abc723e ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220808141246.5749-3-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix setting of FSYNC polarity for DAI formats other than I2S. Also
add support for polarity inversion.
Fixes: 1a476abc723e ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220808141246.5749-2-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: More updates for v5.20
More updates that came in since the last pull request I sent, a series
of driver specific changes:
- Support for AMD RPL, some Intel platforms and Mediatek MT8186.
|
|
|
|
VA Macro fsgen clock is supplied to other LPASS Macros using proper
clock apis, however the internal user uses the registers directly without
clk apis. This approch has race condition where in external users of
the clock might cut the clock while VA macro is actively using this.
Moving the internal usage to clk apis would provide a proper refcounting
and avoid such race conditions.
This issue was noticed while headset was pulled out while recording is
in progress and shifting record patch to DMIC.
Reported-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Link: https://lore.kernel.org/r/20220727124749.4604-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The 0x203E speaker gain register should be non-volatile.
This register value was not able to be synced because it was marked as
volatile.
Signed-off-by: Ryan Lee <ryans.lee@analog.com>
Link: https://lore.kernel.org/r/20220723015220.4169-1-ryans.lee@analog.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The remove() operation unconditionally frees the interrupt for the device
but we may not actually have an interrupt so there might be nothing to
free. Since the interrupt is requested after all other resources we don't
need the explicit free anyway, unwinding is guaranteed to be safe, so just
delete the remove() function and let devm take care of things.
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Tested-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220718140405.57233-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add new widget to control system clock for power saving.
Signed-off-by: Wallace Lin <savagecin0@gmail.com>
Signed-off-by: Wallace Lin <sjlin0@nuvoton.com>
Link: https://lore.kernel.org/r/20220719084047.11572-1-savagecin@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When codec is unbound but not yet removed, in the eyes of
snd_hdac_bus_process_unsol_events() it is still a valid target to
delegate work to. Such behaviour may lead to use-after-free errors.
Address by verifying if codec is actually registered.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220706120230.427296-6-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When loading firmware, wm_adsp uses a number of parameters to
determine the path of the firmware and tuning files to load.
One of these parameters is system_name.
Add support in cs35l41 to read this system name from the ACPI
_SUB ID in order to uniquely identify the firmware and tuning
mapped to a particular system.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220707151037.3901050-3-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In mt6359_parse_dt() and mt6359_accdet_parse_dt(), we should call
of_node_put() for the reference returned by of_get_child_by_name()
which has increased the refcount.
Fixes: 683530285316 ("ASoC: mt6359: fix failed to parse DT properties")
Fixes: eef07b9e0925 ("ASoC: mediatek: mt6359: add MT6359 accdet jack driver")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220713102013.367336-1-windhl@126.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds the function of headphone button detection,
Button detection will be enabled if the device tree
has a key_enable property.
Signed-off-by: Seven Lee <wtli@nuvoton.com>
Link: https://lore.kernel.org/r/20220627032959.3442064-1-wtli@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>:
Our tests platforms do use realtek codecs, while implementing avs driver
and machine boards for it, we identified some problems with those codec
drivers.
This series aims to fix those issues.
|
|
Needed for the Rockchip driver.
|
|
Make sure that component is set to proper value, otherwise we may
dereference freed component in interrupt.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707125701.3518263-6-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make sure that component is set to proper value, otherwise we may
dereference freed component in interrupt.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707125701.3518263-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make sure that component is set to proper value, otherwise we may
dereference freed component in interrupt.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707125701.3518263-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On our RVP platforms using rt298 with combojack we've seen issues with
controls being in incorrect state after suspend/resume cycle. This is
caused by codec driver not setting pins to correct state and causing
codec suspend method to not be called. Which on resume caused codec
registers to be in undefined state. Fix this by setting pins correctly
in jack detect function.
Above problem is caused by the fact that when jack == NULL code doesn't
reach rt298_jack_detect() function which sets pins. Alternatively
problem could be fixed by just moving rt298_jack_detect, but as rt298
codec is similar to rt286, align the code by setting pins explicitly.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707125701.3518263-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Set rt298->jack to passed value in mic_detect, otherwise when jack is
set to NULL on next interrupt call, we may use freed pointer.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707125701.3518263-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The patch is to make driver with flexibility for more platforms support even if
the internal design is just one ADC. Besides, many I2S controllers only support
2 channels.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20220708054647.540621-1-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
1.update Kconfig and Makefile 2.add tas2780.c and tas2780.h
Signed-off-by: Raphael-Xu <13691752556@139.com>
Link: https://lore.kernel.org/r/20220707123343.2403-1-13691752556@139.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The patch fixes the wrong state of JD1 and JD2 while the bst1 or bst2 is
power on in the HDA JD using.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Reported-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20220705101134.16792-1-oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The register default is 0x28 per the datasheet, and the amp gain field
is supposed to be shifted left by one. With the wrong default, the ALSA
controls lie about the power-up state. With the wrong shift, we get only
half the gain we expect.
Signed-off-by: Hector Martin <marcan@marcan.st>
Fixes: 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220630075135.2221-4-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
DVC value 0xc8 is -100dB and 0xc9 is mute; this needs to map to
-100.5dB as far as the dB scale is concerned. Fix that and enable
the mute flag, so alsamixer correctly shows the control as
<0 dB .. -100 dB, mute>.
Signed-off-by: Hector Martin <marcan@marcan.st>
Fixes: 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220630075135.2221-3-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix setting of FSYNC polarity in case of LEFT_J and DSP_A/B formats.
Do NOT set the SCFG field as was previously done, because that is not
correct and is also in conflict with the "ASI1 Source" control which
sets the same SCFG field!
Also add support for explicit polarity inversion.
Fixes: 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220630075135.2221-2-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make sure there is at least 1 ms delay from reset to first command as
is specified in the datasheet. This is a fix similar to commit
307f31452078 ("ASoC: tas2770: Insert post reset delay").
Fixes: 827ed8a0fa50 ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220630075135.2221-1-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently the function arizona_aif_cfg_changed uses the TX_BCLK_RATE,
however this register is not used on wm8998. This was not noticed as
previously snd_soc_component_read did not print an error message.
However, now the log gets filled with error messages, further more the
test for if the LRCLK changed will return spurious results.
Update the code to use the RX_BCLK_RATE register, the LRCLK parameters
are written to both registers and the RX_BCLK_RATE register is used
across all Arizona devices.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220628153409.3266932-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
cs47l92_put_demux returns the value of snd_soc_dapm_mux_update_power,
which returns a 1 if a path was found for the kcontrol. This is
obviously different to the expected return a 1 if the control
was updated value. This results in spurious notifications to
user-space. Update the handling to only return a 1 when the value is
changed.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220628153409.3266932-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
wm8998_inmux_put returns the value of snd_soc_dapm_mux_update_power,
which returns a 1 if a path was found for the kcontrol. This is
obviously different to the expected return a 1 if the control
was updated value. This results in spurious notifications to
user-space. Update the handling to only return a 1 when the value is
changed.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220628153409.3266932-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The output compensation controls always returns zero regardless of if
the control value was updated. This results in missing notifications
to user-space of the control change. Update the handling to return 1
when the value is changed.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220628153409.3266932-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently slim_tx_mixer_get reports all TX mixers as enabled when
at least one is, due to it reading the entire tx_port_value bitmask
without testing the specific bit corresponding to a TX port.
Furthermore, using the same bitmask for all capture DAIs makes
setting one mixer affect them all. To prevent this, and since
the SLIM TX muxes effectively only connect to one of the mixers
at a time, turn tx_port_value into an int array storing the DAI
index each of the ports is connected to.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Link: https://lore.kernel.org/r/20220622061745.35399-1-y.oudjana@protonmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The tx_mask check doesn't reflect what the driver and the chip support.
The check currently checks for exactly two slots being enabled. The
tlv320adcx140 supports anything between one and eight channels, so relax
the check accordingly.
The tlv320adcx140 supports arbitrary tx_mask settings, but the driver
currently only supports adjacent slots beginning with the first slot,
so extend the check to check that the first slot is being used and that
there are no holes in the tx_mask.
Leave a comment to make it's the driver that limits the tx_mask
settings, not the chip itself.
While at it remove the set-but-unused struct adcx140p_priv::tdm_delay
field.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220624105716.2579539-1-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
max98396_dai_set_fmt() modifes register 2041 and touches bits in the mask
0x3a. Make sure to use the right mask for that operation.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20220624104712.1934484-7-daniel@zonque.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Put the SGTL5000 in a silent/safe state on shutdown/remove, this is
required since the SGTL5000 produces a constant noise on its output
after it is configured and its clock is removed. Without this change
this is happening every time the module is unbound/removed or from
reboot till the clock is enabled again.
The issue was experienced on both a Toradex Colibri/Apalis iMX6, but can
be easily reproduced everywhere just playing something on the codec and
after that removing/unbinding the driver.
Fixes: 9b34e6cc3bc2 ("ASoC: Add Freescale SGTL5000 codec support")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20220624101301.441314-1-francesco.dolcini@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20220705005315.663920-1-cuigaosheng1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
