From 0d9813319b40399a0d8fd761d2fcfedee5701487 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Fri, 7 Sep 2018 23:13:12 +0200 Subject: mt76x0: run vco calibration for each channel configuration commit 473f0a763d2c7cd68a6dedf51e7d81e8f58f78ac upstream. According to vendor sdk, vco calibration has to be executed for each channel configuration whereas mcu calibration has to be performed during channel scanning. This patch fixes the mt76x0 monitor mode issue since in that configuration vco calibration was never executed Fixes: 10de7a8b4ab9 ("mt76x0: phy files") Tested-by: Sid Hayn Signed-off-by: Lorenzo Bianconi Signed-off-by: Felix Fietkau Cc: Stanislaw Gruszka Signed-off-by: Greg Kroah-Hartman --- drivers/net/wireless/mediatek/mt76/mt76x0/phy.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c index 5da7bfbe907f..14e8c575f6c3 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c +++ b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c @@ -757,10 +757,10 @@ __mt76x0_phy_set_channel(struct mt76x0_dev *dev, /* Vendor driver don't do it */ /* mt76x0_phy_set_tx_power(dev, channel, rf_bw_band); */ + mt76x0_vco_cal(dev, channel); if (scan) - mt76x0_vco_cal(dev, channel); + mt76x0_mcu_calibrate(dev, MCU_CAL_RXDCOC, 1); - mt76x0_mcu_calibrate(dev, MCU_CAL_RXDCOC, 1); mt76x0_phy_set_chan_pwr(dev, channel); dev->mt76.chandef = *chandef; -- cgit v1.2.3