From 6b358aedced8180830727258718c3916bef3e249 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Wed, 22 Oct 2014 20:26:44 +0200 Subject: phy: marvell: Add support for 88E3016 FastEthernet PHY MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Marvell 88E3016 is a FastEthernet PHY that also can be found in Marvell Berlin SoCs as integrated PHY. Tested-by: Antoine Ténart Reviewed-by: Florian Fainelli Signed-off-by: Sebastian Hesselbarth Signed-off-by: David S. Miller --- drivers/net/phy/marvell.c | 46 +++++++++++++++++++++++++++++++++++++++++++++ include/linux/marvell_phy.h | 1 + 2 files changed, 47 insertions(+) diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index bd37e45c89c0..d2b2f2f795d5 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -118,6 +118,9 @@ #define MII_M1116R_CONTROL_REG_MAC 21 +#define MII_88E3016_PHY_SPEC_CTRL 0x10 +#define MII_88E3016_DISABLE_SCRAMBLER 0x0200 +#define MII_88E3016_AUTO_MDIX_CROSSOVER 0x0030 MODULE_DESCRIPTION("Marvell PHY driver"); MODULE_AUTHOR("Andy Fleming"); @@ -434,6 +437,25 @@ static int m88e1116r_config_init(struct phy_device *phydev) return 0; } +static int m88e3016_config_init(struct phy_device *phydev) +{ + int reg; + + /* Enable Scrambler and Auto-Crossover */ + reg = phy_read(phydev, MII_88E3016_PHY_SPEC_CTRL); + if (reg < 0) + return reg; + + reg &= ~MII_88E3016_DISABLE_SCRAMBLER; + reg |= MII_88E3016_AUTO_MDIX_CROSSOVER; + + reg = phy_write(phydev, MII_88E3016_PHY_SPEC_CTRL, reg); + if (reg < 0) + return reg; + + return 0; +} + static int m88e1111_config_init(struct phy_device *phydev) { int err; @@ -770,6 +792,12 @@ static int marvell_read_status(struct phy_device *phydev) return 0; } +static int marvell_aneg_done(struct phy_device *phydev) +{ + int retval = phy_read(phydev, MII_M1011_PHY_STATUS); + return (retval < 0) ? retval : (retval & MII_M1011_PHY_STATUS_RESOLVED); +} + static int m88e1121_did_interrupt(struct phy_device *phydev) { int imask; @@ -1050,6 +1078,23 @@ static struct phy_driver marvell_drivers[] = { .suspend = &genphy_suspend, .driver = { .owner = THIS_MODULE }, }, + { + .phy_id = MARVELL_PHY_ID_88E3016, + .phy_id_mask = MARVELL_PHY_ID_MASK, + .name = "Marvell 88E3016", + .features = PHY_BASIC_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_aneg = &genphy_config_aneg, + .config_init = &m88e3016_config_init, + .aneg_done = &marvell_aneg_done, + .read_status = &marvell_read_status, + .ack_interrupt = &marvell_ack_interrupt, + .config_intr = &marvell_config_intr, + .did_interrupt = &m88e1121_did_interrupt, + .resume = &genphy_resume, + .suspend = &genphy_suspend, + .driver = { .owner = THIS_MODULE }, + }, }; static int __init marvell_init(void) @@ -1079,6 +1124,7 @@ static struct mdio_device_id __maybe_unused marvell_tbl[] = { { MARVELL_PHY_ID_88E1318S, MARVELL_PHY_ID_MASK }, { MARVELL_PHY_ID_88E1116R, MARVELL_PHY_ID_MASK }, { MARVELL_PHY_ID_88E1510, MARVELL_PHY_ID_MASK }, + { MARVELL_PHY_ID_88E3016, MARVELL_PHY_ID_MASK }, { } }; diff --git a/include/linux/marvell_phy.h b/include/linux/marvell_phy.h index 8e9a029e093d..e6982ac3200d 100644 --- a/include/linux/marvell_phy.h +++ b/include/linux/marvell_phy.h @@ -16,6 +16,7 @@ #define MARVELL_PHY_ID_88E1318S 0x01410e90 #define MARVELL_PHY_ID_88E1116R 0x01410e40 #define MARVELL_PHY_ID_88E1510 0x01410dd0 +#define MARVELL_PHY_ID_88E3016 0x01410e60 /* struct phy_device dev_flags definitions */ #define MARVELL_PHY_M1145_FLAGS_RESISTANCE 0x00000001 -- cgit v1.2.3 From e7de17abeda24d8acc316b2e07bd969d03099eea Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Wed, 22 Oct 2014 20:26:45 +0200 Subject: net: pxa168_eth: Provide phy_interface mode on platform_data MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The PXA168 Ethernet IP support MII and RMII connection to its PHY. Currently, pxa168 platform_data does not provide a way to pass that and there is one user of pxa168 platform_data (mach-mmp/gplug). Given the pinctrl settings of gplug it uses RMII, so add and pass a corresponding phy_interface_t. Tested-by: Antoine Ténart Reviewed-by: Florian Fainelli Signed-off-by: Sebastian Hesselbarth Signed-off-by: David S. Miller --- arch/arm/mach-mmp/gplugd.c | 2 ++ include/linux/pxa168_eth.h | 1 + 2 files changed, 3 insertions(+) diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c index d81b2475e67e..3b5794cd0357 100644 --- a/arch/arm/mach-mmp/gplugd.c +++ b/arch/arm/mach-mmp/gplugd.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include @@ -158,6 +159,7 @@ struct pxa168_eth_platform_data gplugd_eth_platform_data = { .port_number = 0, .phy_addr = 0, .speed = 0, /* Autonagotiation */ + .intf = PHY_INTERFACE_MODE_RMII, .init = gplugd_eth_init, }; diff --git a/include/linux/pxa168_eth.h b/include/linux/pxa168_eth.h index 18d75e795606..37c381120bc8 100644 --- a/include/linux/pxa168_eth.h +++ b/include/linux/pxa168_eth.h @@ -13,6 +13,7 @@ struct pxa168_eth_platform_data { */ int speed; /* 0, SPEED_10, SPEED_100 */ int duplex; /* DUPLEX_HALF or DUPLEX_FULL */ + phy_interface_t intf; /* * Override default RX/TX queue sizes if nonzero. -- cgit v1.2.3 From 9d8ea73d3ebdf4ab8f1d2e447452fb0b504e3873 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Wed, 22 Oct 2014 20:26:46 +0200 Subject: net: pxa168_eth: Prepare proper libphy handling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Current libphy handling in pxa168_eth lacks proper phy_connect. Prepare to fix this by first moving phy properties from platform_data to private driver data. Tested-by: Antoine Ténart Reviewed-by: Florian Fainelli Signed-off-by: Sebastian Hesselbarth Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/pxa168_eth.c | 38 +++++++++++++++++++------------ 1 file changed, 23 insertions(+), 15 deletions(-) diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c index c3b209cd0660..3918887e09c5 100644 --- a/drivers/net/ethernet/marvell/pxa168_eth.c +++ b/drivers/net/ethernet/marvell/pxa168_eth.c @@ -197,6 +197,9 @@ struct tx_desc { struct pxa168_eth_private { int port_num; /* User Ethernet port number */ int phy_addr; + int phy_speed; + int phy_duplex; + phy_interface_t phy_intf; int rx_resource_err; /* Rx ring resource error flag */ @@ -1394,19 +1397,17 @@ static void phy_init(struct pxa168_eth_private *pep) { struct phy_device *phy = pep->phy; - phy_attach(pep->dev, dev_name(&phy->dev), PHY_INTERFACE_MODE_MII); + phy_attach(pep->dev, dev_name(&phy->dev), pep->phy_intf); - if (pep->pd && pep->pd->speed != 0) { + phy->speed = pep->phy_speed; + phy->duplex = pep->phy_duplex; + phy->autoneg = AUTONEG_ENABLE; + phy->supported &= PHY_BASIC_FEATURES; + phy->advertising = phy->supported | ADVERTISED_Autoneg; + + if (pep->phy_speed != 0) { phy->autoneg = AUTONEG_DISABLE; phy->advertising = 0; - phy->speed = pep->pd->speed; - phy->duplex = pep->pd->duplex; - } else { - phy->autoneg = AUTONEG_ENABLE; - phy->speed = 0; - phy->duplex = 0; - phy->supported &= PHY_BASIC_FEATURES; - phy->advertising = phy->supported | ADVERTISED_Autoneg; } phy_start_aneg(phy); @@ -1416,9 +1417,6 @@ static int ethernet_phy_setup(struct net_device *dev) { struct pxa168_eth_private *pep = netdev_priv(dev); - if (pep->pd && pep->pd->init) - pep->pd->init(); - pep->phy = phy_scan(pep, pep->phy_addr & 0x1f); if (pep->phy != NULL) phy_init(pep); @@ -1552,13 +1550,23 @@ static int pxa168_eth_probe(struct platform_device *pdev) pep->port_num = pep->pd->port_number; pep->phy_addr = pep->pd->phy_addr; + pep->phy_speed = pep->pd->speed; + pep->phy_duplex = pep->pd->duplex; + pep->phy_intf = pep->pd->intf; + + if (pep->pd->init) + pep->pd->init(); } else if (pdev->dev.of_node) { of_property_read_u32(pdev->dev.of_node, "port-id", &pep->port_num); np = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0); - if (np) - of_property_read_u32(np, "reg", &pep->phy_addr); + if (!np) { + dev_err(&pdev->dev, "missing phy-handle\n"); + return -EINVAL; + } + of_property_read_u32(np, "reg", &pep->phy_addr); + pep->phy_intf = of_get_phy_mode(pdev->dev.of_node); } /* Hardware supports only 3 ports */ -- cgit v1.2.3 From 1a14913289a9d0eafbb29971229c24fbdc4c1496 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Wed, 22 Oct 2014 20:26:47 +0200 Subject: net: pxa168_eth: Remove HW auto-negotiaion MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Marvell Ethernet IP supports PHY negotiation driven by HW. This fundamentally clashes with libphy (software) driven negotiation and also cannot cope with quirky PHYs. Therefore, always disable any HW negotiation features and properly use libphy's phy_device. Tested-by: Antoine Ténart Reviewed-by: Florian Fainelli Signed-off-by: Sebastian Hesselbarth Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/pxa168_eth.c | 100 +++++++++++++++++++++++++----- 1 file changed, 85 insertions(+), 15 deletions(-) diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c index 3918887e09c5..ca60fa24d2ed 100644 --- a/drivers/net/ethernet/marvell/pxa168_eth.c +++ b/drivers/net/ethernet/marvell/pxa168_eth.c @@ -106,6 +106,7 @@ #define SDMA_CMD_ERD (1 << 7) /* Bit definitions of the Port Config Reg */ +#define PCR_DUPLEX_FULL (1 << 15) #define PCR_HS (1 << 12) #define PCR_EN (1 << 7) #define PCR_PM (1 << 0) @@ -113,11 +114,17 @@ /* Bit definitions of the Port Config Extend Reg */ #define PCXR_2BSM (1 << 28) #define PCXR_DSCP_EN (1 << 21) +#define PCXR_RMII_EN (1 << 20) +#define PCXR_AN_SPEED_DIS (1 << 19) +#define PCXR_SPEED_100 (1 << 18) #define PCXR_MFL_1518 (0 << 14) #define PCXR_MFL_1536 (1 << 14) #define PCXR_MFL_2048 (2 << 14) #define PCXR_MFL_64K (3 << 14) +#define PCXR_FLOWCTL_DIS (1 << 12) #define PCXR_FLP (1 << 11) +#define PCXR_AN_FLOWCTL_DIS (1 << 10) +#define PCXR_AN_DUPLEX_DIS (1 << 9) #define PCXR_PRIO_TX_OFF 3 #define PCXR_TX_HIGH_PRI (7 << PCXR_PRIO_TX_OFF) @@ -272,6 +279,7 @@ enum hash_table_entry { static int pxa168_get_settings(struct net_device *dev, struct ethtool_cmd *cmd); static int pxa168_set_settings(struct net_device *dev, struct ethtool_cmd *cmd); static int pxa168_init_hw(struct pxa168_eth_private *pep); +static int pxa168_init_phy(struct net_device *dev); static void eth_port_reset(struct net_device *dev); static void eth_port_start(struct net_device *dev); static int pxa168_eth_open(struct net_device *dev); @@ -658,14 +666,7 @@ static void eth_port_start(struct net_device *dev) struct pxa168_eth_private *pep = netdev_priv(dev); int tx_curr_desc, rx_curr_desc; - /* Perform PHY reset, if there is a PHY. */ - if (pep->phy != NULL) { - struct ethtool_cmd cmd; - - pxa168_get_settings(pep->dev, &cmd); - phy_init_hw(pep->phy); - pxa168_set_settings(pep->dev, &cmd); - } + phy_start(pep->phy); /* Assignment of Tx CTRP of given queue */ tx_curr_desc = pep->tx_curr_desc_q; @@ -720,6 +721,8 @@ static void eth_port_reset(struct net_device *dev) val = rdl(pep, PORT_CONFIG); val &= ~PCR_EN; wrl(pep, PORT_CONFIG, val); + + phy_stop(pep->phy); } /* @@ -981,8 +984,11 @@ static int set_port_config_ext(struct pxa168_eth_private *pep) skb_size = PCXR_MFL_64K; /* Extended Port Configuration */ - wrl(pep, - PORT_CONFIG_EXT, PCXR_2BSM | /* Two byte prefix aligns IP hdr */ + wrl(pep, PORT_CONFIG_EXT, + PCXR_AN_SPEED_DIS | /* Disable HW AN */ + PCXR_AN_DUPLEX_DIS | + PCXR_AN_FLOWCTL_DIS | + PCXR_2BSM | /* Two byte prefix aligns IP hdr */ PCXR_DSCP_EN | /* Enable DSCP in IP */ skb_size | PCXR_FLP | /* do not force link pass */ PCXR_TX_HIGH_PRI); /* Transmit - high priority queue */ @@ -990,6 +996,69 @@ static int set_port_config_ext(struct pxa168_eth_private *pep) return 0; } +static void pxa168_eth_adjust_link(struct net_device *dev) +{ + struct pxa168_eth_private *pep = netdev_priv(dev); + struct phy_device *phy = pep->phy; + u32 cfg, cfg_o = rdl(pep, PORT_CONFIG); + u32 cfgext, cfgext_o = rdl(pep, PORT_CONFIG_EXT); + + cfg = cfg_o & ~PCR_DUPLEX_FULL; + cfgext = cfgext_o & ~(PCXR_SPEED_100 | PCXR_FLOWCTL_DIS | PCXR_RMII_EN); + + if (phy->interface == PHY_INTERFACE_MODE_RMII) + cfgext |= PCXR_RMII_EN; + if (phy->speed == SPEED_100) + cfgext |= PCXR_SPEED_100; + if (phy->duplex) + cfg |= PCR_DUPLEX_FULL; + if (!phy->pause) + cfgext |= PCXR_FLOWCTL_DIS; + + /* Bail out if there has nothing changed */ + if (cfg == cfg_o && cfgext == cfgext_o) + return; + + wrl(pep, PORT_CONFIG, cfg); + wrl(pep, PORT_CONFIG_EXT, cfgext); + + phy_print_status(phy); +} + +static int pxa168_init_phy(struct net_device *dev) +{ + struct pxa168_eth_private *pep = netdev_priv(dev); + struct ethtool_cmd cmd; + int err; + + if (pep->phy) + return 0; + + pep->phy = mdiobus_scan(pep->smi_bus, pep->phy_addr); + if (!pep->phy) + return -ENODEV; + + err = phy_connect_direct(dev, pep->phy, pxa168_eth_adjust_link, + pep->phy_intf); + if (err) + return err; + + err = pxa168_get_settings(dev, &cmd); + if (err) + return err; + + cmd.phy_address = pep->phy_addr; + cmd.speed = pep->phy_speed; + cmd.duplex = pep->phy_duplex; + cmd.advertising = PHY_BASIC_FEATURES; + cmd.autoneg = AUTONEG_ENABLE; + + if (cmd.speed != 0) + cmd.autoneg = AUTONEG_DISABLE; + + return pxa168_set_settings(dev, &cmd); +} + static int pxa168_init_hw(struct pxa168_eth_private *pep) { int err = 0; @@ -1136,6 +1205,10 @@ static int pxa168_eth_open(struct net_device *dev) struct pxa168_eth_private *pep = netdev_priv(dev); int err; + err = pxa168_init_phy(dev); + if (err) + return err; + err = request_irq(dev->irq, pxa168_eth_int_handler, 0, dev->name, dev); if (err) { dev_err(&dev->dev, "can't assign irq\n"); @@ -1596,9 +1669,6 @@ static int pxa168_eth_probe(struct platform_device *pdev) goto err_free_mdio; pxa168_init_hw(pep); - err = ethernet_phy_setup(dev); - if (err) - goto err_mdiobus; SET_NETDEV_DEV(dev, &pdev->dev); err = register_netdev(dev); if (err) @@ -1629,13 +1699,13 @@ static int pxa168_eth_remove(struct platform_device *pdev) pep->htpr, pep->htpr_dma); pep->htpr = NULL; } + if (pep->phy) + phy_disconnect(pep->phy); if (pep->clk) { clk_disable(pep->clk); clk_put(pep->clk); pep->clk = NULL; } - if (pep->phy != NULL) - phy_detach(pep->phy); iounmap(pep->base); pep->base = NULL; -- cgit v1.2.3 From 9ff32fe1b9c5e125557766ea1723a7c42779f5a6 Mon Sep 17 00:00:00 2001 From: Sebastian Hesselbarth Date: Wed, 22 Oct 2014 20:26:48 +0200 Subject: net: pxa168_eth: Remove in-driver PHY mangling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With properly using libphy PHYs now, remove the in-driver PHY mangling. Tested-by: Antoine Ténart Reviewed-by: Florian Fainelli Signed-off-by: Sebastian Hesselbarth Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/pxa168_eth.c | 126 ------------------------------ 1 file changed, 126 deletions(-) diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c index ca60fa24d2ed..bee4c369f0fe 100644 --- a/drivers/net/ethernet/marvell/pxa168_eth.c +++ b/drivers/net/ethernet/marvell/pxa168_eth.c @@ -177,7 +177,6 @@ #define LINK_UP (1 << 3) /* Bit definitions for work to be done */ -#define WORK_LINK (1 << 0) #define WORK_TX_DONE (1 << 1) /* @@ -284,7 +283,6 @@ static void eth_port_reset(struct net_device *dev); static void eth_port_start(struct net_device *dev); static int pxa168_eth_open(struct net_device *dev); static int pxa168_eth_stop(struct net_device *dev); -static int ethernet_phy_setup(struct net_device *dev); static inline u32 rdl(struct pxa168_eth_private *pep, int offset) { @@ -316,26 +314,6 @@ static void abort_dma(struct pxa168_eth_private *pep) netdev_err(pep->dev, "%s : DMA Stuck\n", __func__); } -static int ethernet_phy_get(struct pxa168_eth_private *pep) -{ - unsigned int reg_data; - - reg_data = rdl(pep, PHY_ADDRESS); - - return (reg_data >> (5 * pep->port_num)) & 0x1f; -} - -static void ethernet_phy_set_addr(struct pxa168_eth_private *pep, int phy_addr) -{ - u32 reg_data; - int addr_shift = 5 * pep->port_num; - - reg_data = rdl(pep, PHY_ADDRESS); - reg_data &= ~(0x1f << addr_shift); - reg_data |= (phy_addr & 0x1f) << addr_shift; - wrl(pep, PHY_ADDRESS, reg_data); -} - static void rxq_refill(struct net_device *dev) { struct pxa168_eth_private *pep = netdev_priv(dev); @@ -890,43 +868,9 @@ static int pxa168_eth_collect_events(struct pxa168_eth_private *pep, } if (icr & ICR_RXBUF) ret = 1; - if (icr & ICR_MII_CH) { - pep->work_todo |= WORK_LINK; - ret = 1; - } return ret; } -static void handle_link_event(struct pxa168_eth_private *pep) -{ - struct net_device *dev = pep->dev; - u32 port_status; - int speed; - int duplex; - int fc; - - port_status = rdl(pep, PORT_STATUS); - if (!(port_status & LINK_UP)) { - if (netif_carrier_ok(dev)) { - netdev_info(dev, "link down\n"); - netif_carrier_off(dev); - txq_reclaim(dev, 1); - } - return; - } - if (port_status & PORT_SPEED_100) - speed = 100; - else - speed = 10; - - duplex = (port_status & FULL_DUPLEX) ? 1 : 0; - fc = (port_status & FLOW_CONTROL_DISABLED) ? 0 : 1; - netdev_info(dev, "link up, %d Mb/s, %s duplex, flow control %sabled\n", - speed, duplex ? "full" : "half", fc ? "en" : "dis"); - if (!netif_carrier_ok(dev)) - netif_carrier_on(dev); -} - static irqreturn_t pxa168_eth_int_handler(int irq, void *dev_id) { struct net_device *dev = (struct net_device *)dev_id; @@ -1307,10 +1251,6 @@ static int pxa168_rx_poll(struct napi_struct *napi, int budget) struct net_device *dev = pep->dev; int work_done = 0; - if (unlikely(pep->work_todo & WORK_LINK)) { - pep->work_todo &= ~(WORK_LINK); - handle_link_event(pep); - } /* * We call txq_reclaim every time since in NAPI interupts are disabled * and due to this we miss the TX_DONE interrupt,which is not updated in @@ -1433,72 +1373,6 @@ static int pxa168_eth_do_ioctl(struct net_device *dev, struct ifreq *ifr, return -EOPNOTSUPP; } -static struct phy_device *phy_scan(struct pxa168_eth_private *pep, int phy_addr) -{ - struct mii_bus *bus = pep->smi_bus; - struct phy_device *phydev; - int start; - int num; - int i; - - if (phy_addr == PXA168_ETH_PHY_ADDR_DEFAULT) { - /* Scan entire range */ - start = ethernet_phy_get(pep); - num = 32; - } else { - /* Use phy addr specific to platform */ - start = phy_addr & 0x1f; - num = 1; - } - phydev = NULL; - for (i = 0; i < num; i++) { - int addr = (start + i) & 0x1f; - if (bus->phy_map[addr] == NULL) - mdiobus_scan(bus, addr); - - if (phydev == NULL) { - phydev = bus->phy_map[addr]; - if (phydev != NULL) - ethernet_phy_set_addr(pep, addr); - } - } - - return phydev; -} - -static void phy_init(struct pxa168_eth_private *pep) -{ - struct phy_device *phy = pep->phy; - - phy_attach(pep->dev, dev_name(&phy->dev), pep->phy_intf); - - phy->speed = pep->phy_speed; - phy->duplex = pep->phy_duplex; - phy->autoneg = AUTONEG_ENABLE; - phy->supported &= PHY_BASIC_FEATURES; - phy->advertising = phy->supported | ADVERTISED_Autoneg; - - if (pep->phy_speed != 0) { - phy->autoneg = AUTONEG_DISABLE; - phy->advertising = 0; - } - - phy_start_aneg(phy); -} - -static int ethernet_phy_setup(struct net_device *dev) -{ - struct pxa168_eth_private *pep = netdev_priv(dev); - - pep->phy = phy_scan(pep, pep->phy_addr & 0x1f); - if (pep->phy != NULL) - phy_init(pep); - - update_hash_table_mac_address(pep, NULL, dev->dev_addr); - - return 0; -} - static int pxa168_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) { struct pxa168_eth_private *pep = netdev_priv(dev); -- cgit v1.2.3