diff options
Diffstat (limited to 'arch/arm/Kconfig.debug')
| -rw-r--r-- | arch/arm/Kconfig.debug | 135 |
1 files changed, 31 insertions, 104 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 4ff04201a8cc..9e0b5e7f12af 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -770,14 +770,6 @@ choice depends on ARCH_OMAP2PLUS select DEBUG_OMAP2PLUS_UART - config DEBUG_PICOXCELL_UART - depends on ARCH_PICOXCELL - bool "Use PicoXcell UART for low-level debug" - select DEBUG_UART_8250 - help - Say Y here if you want kernel low-level debugging support - on PicoXcell based platforms. - config DEBUG_PXA_UART1 depends on ARCH_PXA bool "Use PXA UART1 for low-level debug" @@ -1150,32 +1142,6 @@ choice Say Y here if you want kernel low-level debugging support on Allwinner A31/A23 based platforms on the R_UART. - config DEBUG_SIRFPRIMA2_UART1 - bool "Kernel low-level debugging messages via SiRFprimaII UART1" - depends on ARCH_PRIMA2 - select DEBUG_SIRFSOC_UART - help - Say Y here if you want the debug print routines to direct - their output to the uart1 port on SiRFprimaII devices. - - config DEBUG_SIRFATLAS7_UART0 - bool "Kernel low-level debugging messages via SiRFatlas7 UART0" - depends on ARCH_ATLAS7 - select DEBUG_SIRFSOC_UART - help - Say Y here if you want the debug print routines to direct - their output to the uart0 port on SiRFATLAS7 devices.The uart0 - is used on SiRFATLAS7 as a extra debug port.sometimes an extra - debug port can be very useful. - - config DEBUG_SIRFATLAS7_UART1 - bool "Kernel low-level debugging messages via SiRFatlas7 UART1" - depends on ARCH_ATLAS7 - select DEBUG_SIRFSOC_UART - help - Say Y here if you want the debug print routines to direct - their output to the uart1 port on SiRFATLAS7 devices. - config DEBUG_SPEAR3XX bool "Kernel low-level debugging messages via ST SPEAr 3xx/6xx UART" depends on ARCH_SPEAR3XX || ARCH_SPEAR6XX @@ -1192,10 +1158,9 @@ choice Say Y here if you want kernel low-level debugging support on ST SPEAr13xx based platforms. - config STIH41X_DEBUG_ASC2 + config DEBUG_STIH41X_ASC2 bool "Use StiH415/416 ASC2 UART for low-level debug" depends on ARCH_STI - select DEBUG_STI_UART help Say Y here if you want kernel low-level debugging support on STiH415/416 based platforms like b2000, which has @@ -1203,10 +1168,9 @@ choice If unsure, say N. - config STIH41X_DEBUG_SBC_ASC1 + config DEBUG_STIH41X_SBC_ASC1 bool "Use StiH415/416 SBC ASC1 UART for low-level debug" depends on ARCH_STI - select DEBUG_STI_UART help Say Y here if you want kernel low-level debugging support on STiH415/416 based platforms like b2020. which has @@ -1214,6 +1178,16 @@ choice If unsure, say N. + config DEBUG_STIH418_SBC_ASC0 + bool "Use StiH418 SBC ASC0 UART for low-level debug" + depends on ARCH_STI + help + Say Y here if you want kernel low-level debugging support + on STiH418 based platforms which has default UART wired + up to SBC ASC0. + + If unsure, say N. + config STM32F4_DEBUG_UART bool "Use STM32F4 UART for low-level debug" depends on MACH_STM32F429 || MACH_STM32F469 @@ -1314,14 +1288,6 @@ choice Say Y here if you want kernel low-level debugging support on Tegra based platforms. - config DEBUG_U300_UART - bool "Kernel low-level debugging messages via U300 UART0" - depends on ARCH_U300 - select DEBUG_UART_PL01X - help - Say Y here if you want the debug print routines to direct - their output to the uart port on U300 devices. - config DEBUG_UX500_UART depends on ARCH_U8500 bool "Use Ux500 UART for low-level debug" @@ -1387,18 +1353,6 @@ choice This option selects UART0 on VIA/Wondermedia System-on-a-chip devices, including VT8500, WM8505, WM8650 and WM8850. - config DEBUG_ZTE_ZX - bool "Use ZTE ZX UART" - select DEBUG_UART_PL01X - depends on ARCH_ZX - help - Say Y here if you are enabling ZTE ZX296702 SOC and need - debug uart support. - - This option is preferred over the platform specific - options; the platform specific options are deprecated - and will be soon removed. - config DEBUG_ZYNQ_UART0 bool "Kernel low-level debugging on Xilinx Zynq using UART0" depends on ARCH_ZYNQ @@ -1456,20 +1410,6 @@ choice options; the platform specific options are deprecated and will be soon removed. - config DEBUG_LL_UART_EFM32 - bool "Kernel low-level debugging via efm32 UART" - depends on ARCH_EFM32 - help - Say Y here if you want the debug print routines to direct - their output to an UART or USART port on efm32 based - machines. Use the following addresses for DEBUG_UART_PHYS: - - 0x4000c000 | USART0 - 0x4000c400 | USART1 - 0x4000c800 | USART2 - 0x4000e000 | UART0 - 0x4000e400 | UART1 - config DEBUG_LL_UART_PL01X bool "Kernel low-level debugging via ARM Ltd PL01x Primecell UART" help @@ -1552,18 +1492,10 @@ config DEBUG_TEGRA_UART bool depends on ARCH_TEGRA -config DEBUG_STI_UART - bool - depends on ARCH_STI - config DEBUG_STM32_UART bool depends on ARCH_STM32 -config DEBUG_SIRFSOC_UART - bool - depends on ARCH_SIRF - config DEBUG_UART_FLOW_CONTROL bool "Enable flow control (CTS) for the debug UART" depends on DEBUG_LL @@ -1587,7 +1519,6 @@ config DEBUG_LL_INCLUDE default "debug/meson.S" if DEBUG_MESON_UARTAO default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X default "debug/exynos.S" if DEBUG_EXYNOS_UART - default "debug/efm32.S" if DEBUG_LL_UART_EFM32 default "debug/icedcc.S" if DEBUG_ICEDCC default "debug/imx.S" if DEBUG_IMX1_UART || \ DEBUG_IMX25_UART || \ @@ -1619,8 +1550,9 @@ config DEBUG_LL_INCLUDE default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4 default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART || DEBUG_S3C64XX_UART default "debug/s5pv210.S" if DEBUG_S5PV210_UART - default "debug/sirf.S" if DEBUG_SIRFSOC_UART - default "debug/sti.S" if DEBUG_STI_UART + default "debug/sti.S" if DEBUG_STIH41X_ASC2 + default "debug/sti.S" if DEBUG_STIH41X_SBC_ASC1 + default "debug/sti.S" if DEBUG_STIH418_SBC_ASC0 default "debug/stm32.S" if DEBUG_STM32_UART default "debug/tegra.S" if DEBUG_TEGRA_UART default "debug/ux500.S" if DEBUG_UX500_UART @@ -1653,7 +1585,7 @@ config DEBUG_UART_PHYS default 0x02531000 if DEBUG_KEYSTONE_UART1 default 0x03010fe0 if ARCH_RPC default 0x07000000 if DEBUG_SUN9I_UART0 - default 0x09405000 if DEBUG_ZTE_ZX + default 0x09530000 if DEBUG_STIH418_SBC_ASC0 default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \ DEBUG_VEXPRESS_UART0_CA9 default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT @@ -1671,8 +1603,6 @@ config DEBUG_UART_PHYS default 0x1600d000 if DEBUG_SD5203_UART default 0x18000300 if DEBUG_BCM_5301X default 0x18000400 if DEBUG_BCM_HR2 - default 0x18010000 if DEBUG_SIRFATLAS7_UART0 - default 0x18020000 if DEBUG_SIRFATLAS7_UART1 default 0x18023000 if DEBUG_BCM_IPROC_UART3 default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1 default 0x20001000 if DEBUG_HIP01_UART @@ -1682,7 +1612,6 @@ config DEBUG_UART_PHYS default 0x20201000 if DEBUG_BCM2835 default 0x3e000000 if DEBUG_BCM_KONA_UART default 0x3f201000 if DEBUG_BCM2836 - default 0x4000e400 if DEBUG_LL_UART_EFM32 default 0x40010000 if STM32MP1_DEBUG_UART default 0x40011000 if STM32F4_DEBUG_UART || STM32F7_DEBUG_UART || \ STM32H7_DEBUG_UART @@ -1717,12 +1646,9 @@ config DEBUG_UART_PHYS default 0x80010000 if DEBUG_ASM9260_UART default 0x80070000 if DEBUG_IMX23_UART default 0x80074000 if DEBUG_IMX28_UART - default 0x80230000 if DEBUG_PICOXCELL_UART default 0x808c0000 if DEBUG_EP93XX || ARCH_EP93XX default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART - default 0xb0060000 if DEBUG_SIRFPRIMA2_UART1 default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX - default 0xc0013000 if DEBUG_U300_UART default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN default 0xd0000000 if DEBUG_SPEAR3XX @@ -1752,7 +1678,9 @@ config DEBUG_UART_PHYS default 0xfc00c000 if DEBUG_AT91_SAMA5D4_USART3 default 0xfcb00000 if DEBUG_HI3620_UART default 0xfd883000 if DEBUG_ALPINE_UART0 + default 0xfe531000 if DEBUG_STIH41X_SBC_ASC1 default 0xfe800000 if ARCH_IOP32X + default 0xfed32000 if DEBUG_STIH41X_ASC2 default 0xff690000 if DEBUG_RK32_UART2 default 0xffc02000 if DEBUG_SOCFPGA_UART0 default 0xffc02100 if DEBUG_SOCFPGA_ARRIA10_UART1 @@ -1768,7 +1696,6 @@ config DEBUG_UART_PHYS default 0xfffff200 if DEBUG_AT91_RM9200_DBGU depends on ARCH_EP93XX || \ DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ - DEBUG_LL_UART_EFM32 || \ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \ DEBUG_R7S9210_SCIF2 || DEBUG_R7S9210_SCIF4 || \ @@ -1780,8 +1707,10 @@ config DEBUG_UART_PHYS DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \ DEBUG_S3C64XX_UART || \ DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ - DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \ - DEBUG_AT91_UART || DEBUG_STM32_UART + DEBUG_DIGICOLOR_UA0 || \ + DEBUG_AT91_UART || DEBUG_STM32_UART || \ + DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \ + DEBUG_STIH418_SBC_ASC0 config DEBUG_UART_VIRT hex "Virtual base address of debug UART" @@ -1826,6 +1755,7 @@ config DEBUG_UART_VIRT default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1 default 0xf8ffee00 if DEBUG_AT91_SAM9263_DBGU default 0xf8fff200 if DEBUG_AT91_RM9200_DBGU + default 0xf9530000 if DEBUG_STIH418_SBC_ASC0 default 0xf9e09000 if DEBUG_AM33XXUART1 default 0xfa020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1 default 0xfa022000 if DEBUG_TI81XXUART2 @@ -1842,15 +1772,15 @@ config DEBUG_UART_VIRT default 0xfb020000 if DEBUG_OMAP3UART3 default 0xfb042000 if DEBUG_OMAP3UART4 default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT - default 0xfc705000 if DEBUG_ZTE_ZX default 0xfcfe8600 if DEBUG_BCM63XX_UART default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX + default 0xfd531000 if DEBUG_STIH41X_SBC_ASC1 default 0xfd883000 if DEBUG_ALPINE_UART0 + default 0xfdd32000 if DEBUG_STIH41X_ASC2 default 0xfe010000 if STM32MP1_DEBUG_UART default 0xfe017000 if DEBUG_MMP_UART2 default 0xfe018000 if DEBUG_MMP_UART3 default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART - default 0xfe230000 if DEBUG_PICOXCELL_UART default 0xfe300000 if DEBUG_BCM_KONA_UART default 0xfe800000 if ARCH_IOP32X default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HIX5HD2_UART @@ -1863,10 +1793,7 @@ config DEBUG_UART_VIRT default 0xfec03000 if DEBUG_SOCFPGA_CYCLONE5_UART1 default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE - default 0xfec10000 if DEBUG_SIRFATLAS7_UART0 default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0 - default 0xfec20000 if DEBUG_SIRFATLAS7_UART1 - default 0xfec60000 if DEBUG_SIRFPRIMA2_UART1 default 0xfec90000 if DEBUG_RK32_UART2 default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1 default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_SD5203_UART @@ -1882,7 +1809,6 @@ config DEBUG_UART_VIRT default 0xfefb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1 default 0xfefb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2 default 0xfefb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3 - default 0xff003000 if DEBUG_U300_UART default 0xffd01000 if DEBUG_HIP01_UART default DEBUG_UART_PHYS if !MMU depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ @@ -1890,8 +1816,10 @@ config DEBUG_UART_VIRT DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \ DEBUG_S3C64XX_UART || \ DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ - DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \ - DEBUG_AT91_UART || DEBUG_STM32_UART + DEBUG_DIGICOLOR_UA0 || \ + DEBUG_AT91_UART || DEBUG_STM32_UART || \ + DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \ + DEBUG_STIH418_SBC_ASC0 config DEBUG_UART_8250_SHIFT int "Register offset shift for the 8250 debug UART" @@ -1905,8 +1833,7 @@ config DEBUG_UART_8250_WORD bool "Use 32-bit accesses for 8250 UART" depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 depends on DEBUG_UART_8250_SHIFT >= 2 - default y if DEBUG_PICOXCELL_UART || \ - DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_ARRIA10_UART1 || \ + default y if DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_ARRIA10_UART1 || \ DEBUG_SOCFPGA_CYCLONE5_UART1 || DEBUG_KEYSTONE_UART0 || \ DEBUG_KEYSTONE_UART1 || DEBUG_ALPINE_UART0 || \ DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \ @@ -1926,7 +1853,7 @@ config DEBUG_UNCOMPRESS depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG || ARM_SINGLE_ARMV7M depends on DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \ (!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \ - !DEBUG_BRCMSTB_UART + !DEBUG_BRCMSTB_UART && !DEBUG_SEMIHOSTING help This option influences the normal decompressor output for multiplatform kernels. Normally, multiplatform kernels disable |